Download Electrolux T4300S Service manual

Transcript
Service
manual
42. Drum with bearing
42
Replacement of support rollers
1. Disconnect the power to the dryer.
2. Remove the top door hinge.
3. Lift the door off the bottom hinge; remove bottom hinge.
4. Remove the screws that hold the front panel on the dryer and remove the panel.
5. Fig. 1 Unscrew bolts A of the support rollers.
6. Fig. 1 Replace support rollers and tighten bolts A with 20 Nm (15 ft-lb).
7. Reassemble the front panel, door hinges, and door.
8. Connect the power.
Function check
Test the dryer, see section 11: Function check.
2
20 Nm (15 ft-lb)
A
487 0329 81
7