Download Black Box DV900 Service manual
Transcript
http://www.xiaoyu163.com QQ 376315150 892498299 TIMER 0 OPEN/CLOSE STANDBY/ON ORDER NO. RRV2792 XV-DV99 DVD/CD TUNER TEL TEL XV-DV990 THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). Model Type ZYXJ, ZVXJ DC power supplied from other system component Remarks 2 ZYXJ, ZVXJ DC power supplied from other system component 2 connect it to the prescribed system component(s), otherwise damage may result. Please connect it to the POWERED SUBWOOFER S-DV99SW/S-DV990SW, for adjustment and operation inspection. Component DVD/CD TUNER SPEAKER SYSTEM System Service Manual XV-DV99 RRV2792 This manual S-DV99 POWERED SUBWOOFER S-DV99SW SPEAKER SYSTEM S-DV99ST Component DVD/CD TUNER System RRV2807 Service Manual XV-DV990 RRV2792 POWERED SUBWOOFER S-DV990SW RRV2806 SPEAKER SYSTEM S-DV990ST RRV2811 www Remarks Remarks This manual x iao y u163. co m For details, refer to "Important symbols for good services" . . PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2003 T-ZZV JULY 2003 printed in Japan http://www.xiaoyu163.com 376315150 892498299 376315150 892498299 is a system(s) component. QQ 3763 1515 0 89 2498 299 TEThis L product 13942296513 This product does not function properly when independent ; to avoid malfunctions, be sure to XV-DV990 QQ QQ XV-DV99 Regional restriction codes (Region No.) Power Requirement 13942296513 13942296513 XV-DV99 1 2 3 http://www.xiaoyu163.com 4 SAFETY INFORMATION A QQ 376315150 892498299 This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. WARNING ! B TEL TEL THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1 BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR CLASS 1. A SPECIALLY INSTRUCTED PERSON SHOULD DO SERVICING OPERATION OF THE APPARATUS. 13942296513 13942296513 LASER DIODE CHARACTERISTICS FOR DVD : MAXIMUM OUTPUT POWER : 5 mW WAVELENGTH : 650 nm FOR CD : MAXIMUM OUTPUT POWER : 7 mW WAVELENGTH : 780 nm C 376315150 892498299 VRW1872 D Additional Laser Caution 1. Laser Interlock Mechanism • Loading switch (S101 on the LOAB Assy) is used for interlock mechanism of the laser. When this switch turned ON in SW2 (XCLOSE) side (OPEN signal is 0V and XCLOSE signal is 3.5V), a laser becomes the status which can completely oscillation. Furthermore, the laser completely oscillates in the disc judgment and disc playback. When player is power ON state and laser diode is not completely oscillating, 780nm laser diode is always oscillating by half power. • Laser diode is driving with Q201 (650nm LD) and Q211 (780nm LD) on the DVDM Assy. Therefore, when short-circuit between the emitter and collector of these transistors or the base voltage is supplied for transistors turn on, the laser oscillates. (failure mode) • In the test mode ∗ , there is the mode that the laser oscillates except for the disc judgment and playback. LD ON mode in the test mode oscillates with the laser forcibly. The interlock mechanism mentioned above becomes invalid in this mode. E x iao y u163. co m Name Label www F . 2. When the cover is open, close viewing through the objective lens with the naked eye will cause exposure to the laser beam. ∗ : See page 74. XV-DV99 2 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ LABEL CHECK 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 [ Important symbols for good services ] In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them: A 1. Product safety You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual. 2. Adjustments To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed. 3. Cleaning B For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances. TEL TEL 4. Shipping mode and shipping screws 13942296513 13942296513 To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or the shipping screws should be installed before shipping out in accordance with this manual, if necessary. 5. Lubricants, glues, and replacement parts Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used. 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 IC851 IC861, IC871 QQ QQ * When the FFC cable between the VIDEO ASSY-CN8301 and DVDM ASSY-CN 943 is off from the connector and then the power is turned on, the parts below on the DVDM ASSY may be destroyed. Be sure to take care when diagnosing the ASSYS. Refer to P.106. C DSD1791DBR (AUDIO DAC) DSD1702EG (AUDIO DAC) D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 3 8 1 2 3 http://www.xiaoyu163.com 4 CONTENTS A QQ 376315150 892498299 B TEL E www F . x iao y u163. co m XV-DV99 4 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 13942296513 13942296513 C TEL SAFETY INFORMATION ..................................................................................................................................... 2 1. SPECIFICATIONS ............................................................................................................................................ 5 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8 2.1 PACKING ................................................................................................................................................... 8 2.2 EXTERIOR SECTION.............................................................................................................................. 10 2.3 LOADING MECHA ASSY ........................................................................................................................ 12 2.4 TRAVERSE MECHA ASSY-S .................................................................................................................. 14 2.5 DISPLAY UNIT......................................................................................................................................... 15 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 16 3.1 BLOCK DIAGRAM ................................................................................................................................... 16 3.2 LOAB ASSY and OVERALL WIRING DIAGRAM..................................................................................... 18 3.3 DVDM ASSY(1/4)..................................................................................................................................... 20 3.4 DVDM ASSY(2/4)..................................................................................................................................... 22 3.5 DVDM ASSY(3/4)..................................................................................................................................... 24 3.6 DVDM ASSY(4/4)..................................................................................................................................... 26 3.7 VIDEO and DSP TRADE ASSYS............................................................................................................. 28 3.8 DSP ASSY(1/2)........................................................................................................................................ 30 3.9 DSP ASSY(2/2)........................................................................................................................................ 32 3.10 FM/AM TUNER MODULE ...................................................................................................................... 34 3.11 TATRADE and CONTROL(1/3) ASSYS ................................................................................................. 36 3.12 CONTROL(2/3) and HP ASSYS ............................................................................................................ 38 3.13 CONTROL ASSY(3/3)............................................................................................................................ 40 3.14 LCDCONT, CONNECT, KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS ........................................ 42 3.15 WAVEFORMS ........................................................................................................................................ 44 4. PCB CONNECTION DIAGRAM ..................................................................................................................... 45 4.1 LOAB ASSY ............................................................................................................................................. 45 4.2 DVDM ASSY ............................................................................................................................................ 46 4.3 VIDEO and DSP TRADE ASSYS............................................................................................................. 48 4.4 DSP ASSY ............................................................................................................................................... 52 4.5 FM/AM TUNER MODULE ........................................................................................................................ 54 4.6 KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS................................................................................. 55 4.7 TXTRADE, CONTROL and HP ASSYS ................................................................................................... 56 4.8 LCDCONT and CONNECT ASSYS ......................................................................................................... 60 5. PCB PARTS LIST ........................................................................................................................................... 62 6. ADJUSTMENT ............................................................................................................................................... 68 6.1 TUNER SECTION .................................................................................................................................... 68 6.2 ADJUSTMENT ITEMS AND LOCATION ................................................................................................. 69 6.3 JIGS AND MEASURING INSTRUMENTS............................................................................................... 69 6.4 NECESSARY ADJUSTMENT POINTS ................................................................................................... 70 6.5 TEST MODE ............................................................................................................................................ 71 6.6 MECHANISM ADJUSTMENT .................................................................................................................. 72 7. GENERAL INFORMATION ............................................................................................................................. 74 7.1 DIAGNOSIS ............................................................................................................................................. 74 7.1.1 TEST MODE ......................................................................................................................................... 74 7.1.2 DISPLAY SPECIFICATIONS OF THE TEST MODE............................................................................. 76 7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY................................................................ 77 7.1.4 SPECIFICATION OF MODEL INFORMATION ..................................................................................... 78 7.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE................................................................. 79 7.1.6 MECHANICAL ERROR HISTORY ........................................................................................................ 80 7.1.7 ID NUMBER AND DATA SETTING ....................................................................................................... 85 7.1.8 TROUBLE SHOOTING ......................................................................................................................... 88 7.1.9 DSP TROUBLE SHOOTING ................................................................................................................. 91 7.1.10 SEQUENCE AFTER POWER ON ...................................................................................................... 95 7.1.11 SINGLE OPERATION METHOD....................................................................................................... 100 7.1.12 PROTECTION CIRCUIT ................................................................................................................... 101 7.1.13 DISASSEMBLY ................................................................................................................................. 105 7.2 IC ........................................................................................................................................................... 114 7.3 DISC/CONTENT FORMAT .................................................................................................................... 137 7.4 CLEANING............................................................................................................................................. 139 8. PANEL FACILITIES ...................................................................................................................................... 140 6 http://www.xiaoyu163.com 5 7 8 1. SPECIFICATIONS QQ 376315150 892498299 Accessories Continuous Power (RMS). . . . . 75 W / channel . . . . . . . . . . . . . . . . . . . . (1 kHz, THD 10%, 6Ω) Operating Instructions . . . . . . . . . . . . . . . . . . 1 Setup guide. . . . . . . . . . . . . . . . . . . . . . . . . . 1 Display unit . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Remote control unit . . . . . . . . . . . . . . . . . . . . 1 Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Video Cord (yellow plugs) . . . . . . . . . . . . . . . 1 Display cable (gray plugs). . . . . . . . . . . . . . . 1 Control cable A (blue plugs) . . . . . . . . . . . . . 1 Control cable B (black plugs) . . . . . . . . . . . . .1 FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . .1. AM loop antenna . . . . . . . . . . . . . . . . . . . . . . 1 Dry cell batteries (AA/R6) . . . . . . . . . . . . . . . 2 Speaker cords (5 m). . . . . . . . . . . . . . . . . . . . 3 Speaker cords (10 m). . . . . . . . . . . . . . . . . . . 2 Non-skid pads (center speaker) . . . . . . . . . . . 3 Non-skid pads (subwoofer) . . . . . . . . . . . . . . 4 Speaker stands. . . . . . . . . . . . . . . . . . . . . . . 4 Warranty Card. . . . . . . . . . . . . . . . . . . . . . . . 1 Disc section TEL Digital audio characteristics . . . . . . . DVD fs: 96 kHz, 24-bit Type. . . . . . DVD system, Video CD system and Compact Disc digital audio system Frequency response 48 kHz sampling. . . . . . . . . . 4 Hz – 22 kHz 96 kHz sampling. . . . . . . . . . 4 Hz – 44 kHz 192 kHz sampling. . . . . . . . . 4 Hz – 88 kHz S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . 108dB Dynamic range . . . . . . . . . . . . . . . . . . . 95 dB Total harmonic distortion . . . . . . . . . . .0.005 % Wow and Flutter. . . . . . . Limit of measurement (±0.001 % W.PEAK) or less (JEITA) FM tuner section B 13942296513 13942296513 Satellite Speaker System (S-DV99ST) Frequency Range. . . . . . . . . . . . .87.5 - 108MHz Antenna . . . . . . . . . . . . . . . .75Ω , unbalanced Frequency Range. . . . . . . 531 kHz to 1,602 kHz Antenna . . . . . . . . . . . . . . . . . . . Loop antenna Miscellaneous QQ 3763 1515 0 89 2498 299 TEL 13942296513 376315150 892498299 376315150 892498299 Power Requirements European model. . AC 220 - 230 V, 50/60 Hz U.K. model. . . . . . . . . . . AC 230V, 50/60 Hz Power Consumption . . . . . . . . . . . . . . . .163 W Power Consumption in standby mode . . . . . . . . . . . . . . . . . . 0.48 . W Satellite Speaker System (S-DV990ST) Dimensions: DVD/CD Tuner. .360 (W) x 74 (H) x 270 (D) mm Display Unit . . . . 274 (W) x 44 (H) x 35 (D) mm Type . . . . . . . . . . . . . Flat panel type bookshelf Speaker Exciter. . . . . . . . . . . . . . . 2.5 cm exciter x 3 Tweeter. . . . . . . . . . . . . . 2.6 . cm (cone type) Nominal impedence . . . . . . . . . . . . . . . . . . 6Ω Frequency range. . . . . . . . . . . .100 – 35,000 Hz Max. input . . . . . . . . . . . . . . . . . . 75 W (JEITA) Front / Surround speakers Dimensions . . . . .120 (W) x 30 (D) x 450 (H) cm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 kg Center speaker Dimensions . . . . .420 (W) x 32 (D) x 120 (H) cm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 kg Weight: DVD/CD Tuner. . . . . . . . . . . . . . . . . . . . 3.2 kg Display Unit . . . . . . . . . . . . . . . . . . . . . . 0.2 kg C QQ QQ Type Sealed, antimagnetic Speaker . . . . . . . . . . . . . . . . 8.7 . cm (cone type) . . . . . . . . . . . . . . . . . . . . . . .5.2 . cm (cone type) Nominal impedence . . . . . . . . . . . . . . . . . . 6Ω Frequency range. . . . . . . . . . . .80 – 20,000 Hz Max. input . . . . . . . . . . . . . . . . . . 75 W (JEITA) Front / Surround speakers Dimensions . . . . .110 (W) x 59 (D) x 284 (H) cm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg Center speaker Dimensions . . . . .284 (W) x 58 (D) x 110 (H) cm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg AM tuner section A TEL Amplifier Section Powered subwoofer (S-DV99SW S-DV990SW) D E Type . . . . . .Bass reflex floor type, antimagnetic Speaker . . . . . . . . . . . . . . . . 18 cm (cone type) Nominal impedence . . . . . . . . . . . . . . . . . . 6Ω Frequency range. . . . . . . . . . . . . . .28 – 250 Hz Max. input . . . . . . . . . . . . . . . . . . 75 W (JEITA) Dimensions . . . .192 (W) x 436 (D) x 395 (H) cm Weight . . . . . . . . . . . . . . . . . . . . . . . . . .12.5 kg www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 5 8 1 A 3 http://www.xiaoyu163.com 2 4 QQ 376315150 892498299 • Specifications and design subject to possible modification without notice, due to improvements. This product includes FontAvenue® fonts licenced by NEC corporation. FontAvenue is a registered trademark of NEC Corporation. B TEL TEL 13942296513 13942296513 C 376315150 892498299 DB Y/ ON V1 AN ST /V 2/ DV D isplay unit (AXX7163) AM loop antenna (ATB7009) FM antenna (ADH7030) V3 VI DE TV /A CD Dry cell batteries (size AA/R6P) x 2 O OR OS DO CL EN E 0 OP M FM D AY OS TR CL EN OP E 8 ¡ 3 0 4 RE 7 1 4 DV D ME NU TU NE TU RN ST + R TE EN – ST TU M UT E + D SO UN – NE R TE E AS M L M LU RO VO NT CO L VO TV IN PU T OM ED ND NC RA VA AD P D OM E ZO BTITL SU AT PE ND RE RROU SU M RA OG TO PR AU SE RO TU P E GL AN DIO AU DV OM TE ST TO SE D TC 1 LE VE CH SY T UP ST EM 3 SY 2 NE P ME ME DIM NU 6 P S DIS 9 P D DIS R 7 LA ME SY 5 DV 4 S NU L NG UA FO 8 –– – / ER – LD FO CLR GE SU TE LD LE ER + ER FF ENT /O ON ER XT TIM TE B 0 (CL PC IN OC K AD J) M MA AX 00 00 Control cable A (ADE7063) L=3m Control cable B (ADE7078) L=3m Display cable (ADE7077) L=1.5m V ideo cord (VDE1065) Yellow plugs Blue plugs E Black plugs • Power cord (ZVXJ : ADG1156) • Power cord (ZYXJ : ADG1154) www F Gray plugs . x iao y u163. co m XV-DV99 6 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 Remote control unit (AXD7368) QQ QQ accessories 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 A B TEL TEL 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 7 8 1 3 http://www.xiaoyu163.com 2 4 2. EXPLODED VIEWS AND PARTS LIST QQ 376315150 892498299 NOTES: A Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screws adjacent to mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) 2.1 PACKING B TEL TEL 17 5,6 13942296513 13942296513 12,14,16 18 Display Unit 25 FOLDER+ ENTER 9 TIMER/ CLOCK PDP ROOM SETUP 6 0 SUB CH LEVEL FOLDER– 3 8 QUIET/ MIDNIGHT HOME MENU 5 MAIN CLR RANDOM ANGLE 2 TEST TONE 7 – /– – DIMMER TOP MENU REPEAT SUBTITLE SYSTEM SETUP VOL 9 INPUT 1 ZOOM PROGRAM AUDIO SOUND TV CONTROL P ST+ RETURN TUNE– ¢ ENTER TUNE+ ¡ MUTE 0 7 LINE ST– OPEN/CLOSE L1/L2 3 8 TV DVD MENU 1 TUNER FM/AM STANDBY/ON DISPLAY DVD CD 19 Top D 21 Front 24 20 23 22 E www F . x iao y u163. co m XV-DV99 8 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 21 4 19 MASTER VOLUME QQ 3763 1515 0 89 2498 299 11,13,15 QQ QQ TEL 13942296513 8 BASS MODE DIALOGUE VIRTUAL SB AUTO SURROUND ADVANCED 1,2,3,4,7,10 4 C 6 http://www.xiaoyu163.com 5 7 8 PACKING parts List QQ 376315150 892498299 Mark No. > 1 2 3 4 5 Description Power Cord FM Antenna AM Loop Antenna Video Cord Control Cable A (Blue Pugs) Mark No. Part No. 14 See Contrast table (2) ADH7030 ATB7009 VDE1065 ADE7063 15 16 6 7 8 9 NSP 10 11 13 Operating Instructions (English, French) Setup Guide (English, French) Operating Instructions (German, Italian) ARE7333 NSP 17 NSP 18 NSP 19 20 21 22 23 24 25 See Contarst table (2) See Contrast table (2) See Contrast table (2) Setup Guide (Swedish, Dutch) Warranty Card Polyethylene Bag Polyethylene Bag Front Pad See Contrast table (2) ARY7065 AHG7098 Z21-038 AHA7420 Rear Pad Spacer Packing Case Packing Sheet Protection Bag AHA7421 AHB7087 See Contrast table (2) AHG7015 AHG7109 (2) CONTRAST TABLE XV-DV99/ZYXJ, ZVXJ, XV-DV990/ZYXJ and ZVXJ are constructed the same except for the following : Mark No. > Symbol and Description XV-DV99/ZYXJ XV-DV99/ZVXJ XV-DV990/ZYXJ XV-DV990/ZVXJ ADG1154 ARE7332 ADG1156 ARE7332 ADG1154 ARE7334 ADG1156 ARE7334 ARC7491 Not used ARC7491 Not used 16 Setup Guide (Swedish, Dutch) 23 Packing Case ARC7490 Not used ARC7506 Not used ARC7493 Not used ARC7493 Not used ARC7492 Not used ARC7508 Not used AHD8185 AHD8185 AHD8220 AHD8220 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 B C QQ QQ 1 Power Cord 12 Setup Guide (English, French) 13 Operating Instructions (German, Italian) 14 Setup Guide (German, Italian) 15 Operating Instructions (Swedish, Dutch) A 13942296513 13942296513 ADE7078 ADE7077 AXD7368 XZN3130 VEM1031 Part No. See Contrast table (2) TEL TEL 12 Control Cable B (Black Plugs) Display Cable (Gray Plugs) Remote Control Unit Battery Cover Dry Cell Batteries (R6P,AA) Description Setup Guide (German, Italian) Operating Instructions (Swedish, Dutch) D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 9 8 1 3 http://www.xiaoyu163.com 2 4 2.2 EXTERIOR SECTION A QQ 376315150 892498299 40 NON-CONTACT SIDE 31 41 CONTACT SIDE 41 28 24 3 32 35 41 J B E D 4 41 41 28 25 41 K L 2 42 32 13942296513 13942296513 C 26 36 TEL TEL B 41 30 36 C 27 42 F 42 5 44 41 42 H 38 19 41 41 20 41 B 6 22 H E 42 D C 48 7 42 A J 16 49 49 K 17 G 41 17 41 42 I 1 46 A 46 45 B D 49 H E 42 11 8 29 42 10 M 19 I E 16 N 12 42 23 G F O 41 C 34 42 L www 33 F x iao y u163. co m 18 9 29 37 . 42 42 29 29 XV-DV99 10 1 2 3 http://www.xiaoyu163.com 4 39 376315150 892498299 376315150 892498299 D G 41 43 QQ 3763 1515 0 89 2498 299 I F 42 QQ QQ TEL 13942296513 47 43 L 14 Refer to "2.3 LOADING MECHA ASSY". 6 http://www.xiaoyu163.com 5 7 8 EXTERIOR SECTION parts List QQ 376315150 892498299 Mark No. Description Mark No. Part No. DVDM Assy VIDEO Assy DSP Assy DSP TRADE Assy FM/AM TUNER Module AWM7813 AWU8100 AWX8325 AWU8101 AXQ7229 6 7 8 9 10 TX TRADE Assy CONTROL Assy HP Assy KEY R TOP Assy KEY R Assy AWU8114 See Contrast table (2) AWU8102 AWU8113 AWU8112 31 32 33 34 35 KEY L Assy KEY L TOP Assy •••••••• LOADING MECHA Assy •••••••• AWU8110 AWU8111 11 12 13 NSP 14 15 TEL 13942296513 AEB7321 AAK8135 AAN7223 AMA7028 AMB7850 36 37 NSP 38 NSP 39 40 Button Assy T Button Assy F ID Label Assy Name Label R Label AXG7205 AXG7206 VXW1003 See Contrast table (2) VRW1872 41 42 43 NSP 44 45 Screw Screw Screw DVD Assy Connector Assy BBZ30P080FMC BPZ30P080FZK PSC30P080FNI AXA7126 PG05KK-E25 Cushion Adapter02 L Adapter02 R Screw AEB7267 ANW7267 ANW7268 BPZ30P080FMC 46 47 48 49 See Contrast table (2) ANF7035 ANF7036 ANG7467 QQ 3763 1515 0 89 2498 299 (2) CONTRAST TABLE XV-DV99/ZYXJ, ZVXJ, XV-DV990/ZYXJ and ZVXJ are constructed the same except for the following : Mark No. NSP Symbol and Description XV-DV99/ZYXJ 7 CONTROL Assy 22 Rear Panel 39 Name Label R XV-DV99/ZVXJ XV-DV990/ZYXJ XV-DV990/ZVXJ AWU8099 ANC8185 AAL7333 AWU8099 ANC8185 AAL7333 AWU8148 ANC8213 AAL7336 B 376315150 892498299 376315150 892498299 •••••••• Rear Panel Bottom Plate Top Plate Angle DSP ADD7436 ADD7437 ADD7438 ADD7439 ADD7440 Top Spacer Side Plate Tray Panel Bottom Base ZY Top Panel A C QQ QQ 21 22 NSP 23 NSP 24 25 30P FFC/30V 30P FFC/30V 5P FFC/30V 13P FFC/30V 19P FFC/30V Part No. ANG7468 ANG7475 ANG7470 AEB7090 AEB7320 13942296513 13942296513 16 17 18 19 20 VWT1208 Description Angle PCB S Angle PCB M Screw Plate Leg Tuner Spacer TEL TEL 1 2 3 4 5 26 27 28 29 30 AWU8148 ANC8213 AAL7336 D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 11 8 1 3 http://www.xiaoyu163.com 2 4 2.3 LOADING MECHA ASSY QQ 376315150 892498299 Note : A 8 2 Refer to "2.4 TRAVERSE MECHA. ASSY-S". 6 Refer to " Application of Lubricant". 8 8 To DVDM CN101 (Pickup Assy-S) To DVDM CN104 (Stepping Motor) Daifree GEM1036 To DVDM CN105 (Spindle Motor) 8 B 20 18 3 TEL TEL 12 Lubricating Oil GYA1001 A 22 17 5 4 16 19 22 C 22 7 A 10 14 11 Lubricating Oil GYA1001 D A 9 1 22 LOADING MECHA ASSY parts List Mark No. NSP 1 2 3 4 5 E 6 7 8 9 10 Description LOAB Assy Traverse Mechanism Assy-S Loading Motor Assy Motor Pulley Motor Flexible Cable (24P) Connector Assy 2P Floating Rubber Belt Stabilizer www F 11 12 13 14 15 Loading Base Float Base DVD Drive Cam Gear Pulley Loading Gear 16 Drive Gear . Mark No. Part No. VWG2346 VXX2871 VXX2872 PNW1634 VXM1105 VDA1947 VKP2253 VEB1351 VEB1330 VNE2253 Description Part No. 17 18 19 20 SW Lever Clamper Plate Bridge Clamper VNL1925 VNE2251 VNE2252 VNL1924 21 22 23 Screw Screw Tray JGZ17P028FMC Z39-019 VNL1920 x iao y u163. co m VNL1917 VNL1918 VNL1919 VNL1921 VNL1922 VNL1923 XV-DV99 12 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 15 QQ QQ 21 13942296513 13942296513 13 23 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 Application of Lubricant A Lubricating Oil GYA1001 Around the shaft No. 11 Loading Base B TEL TEL Lubricating Oil GYA1001 376315150 892498299 376315150 892498299 Rear View Daifree GEM1036 Concave of unevenness Daifree GEM1036 Concave of unevenness No. 23 Tray C QQ QQ No. 13 Drive Cam Lubricating Oil GYA1001 Front View No. 23 Tray Lubricating Oil GYA1001 Inner side of a ditch QQ 3763 1515 0 89 2498 299 TEL 13942296513 Lubricating Oil GYA1001 Lubricating Oil GYA1001 Inner side of a ditch No. 13 Drive Cam 13942296513 13942296513 Lubricating Oil GYA1001 D E Inner side of a ditch Daifree GEM1036 www x iao y u163. co m Bottom View Top View . Concave of unevenness Daifree GEM1036 Side of the rib Daifree GEM1036 XV-DV99 5 6 http://www.xiaoyu163.com 7 F 13 8 1 3 http://www.xiaoyu163.com 2 4 2.4 TRAVERSE MECHA ASSY-S QQ 376315150 892498299 15 (Torque : 0.15 ± 0.01 N•m) A Silicone Adhesive GEM1037 17 8 3 17 10 17 10 6 To DVDM CN101 (Pickup Assy) 13 9 16 C 376315150 892498299 To DVDM CN105 (Spindle Motor) 15 (Torque : 0.15 ± 0.01 N•m) 16 D 2 To DVDM CN104 (Stepping Motor) 11 E TRAVERSE MECHA ASSY-S parts List Mark No. > F Description 1 2 3 4 5 Spindle Motor Stepping Motor Pickup Assy-S Skew Screw Skew Spring 6 7 8 9 Guide Bar Sub Guide Bar Leaf Spring Joint Spring www Mark No. Part No. 10 VXM1099 VXM1101 OXX8005 VBA1080 VBH1335 . NSP 11 12 13 14 15 Description Part No. Support Spring VNC1020 Mechanism Chassis Damper Sheet Spacer Joint 03 Tapping Screw VNE2248 VEB1335 VNL1913 VNL1949 OBA8021 Screw Screw BBZ20P050FZK PMA26P100FMC x iao y u163. co m VLL1514 VLL1515 VNC1023 VNC1019 16 17 XV-DV99 14 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 Screw Tight GYL1001 5 (Adjustment spring) QQ QQ Silicone Adhesive GEM1037 13942296513 13942296513 14 4 (Adjustment screw) TEL TEL 12 CONTACT SIDE 1 B NON-CONTACT SIDE 7 6 http://www.xiaoyu163.com 5 7 8 2.5 DISPLAY UNIT QQ 376315150 892498299 16 18 1 J 17 16 A 16 7 8 9 15 12 B K TEL TEL 14 2 11 10 5 4 13942296513 13942296513 3 6 7 QQ 3763 1515 0 89 2498 299 13 376315150 892498299 376315150 892498299 TEL 13942296513 QQ QQ 7 DISPLAY UNIT parts List Mark No. Description Part No. 1 2 3 4 5 LCD CONT Assy CONNECT Assy LCD LED (White) Diffusion Sheet AWU8119 AWU8118 AAV7098 NSPW510BS-1064 AAK8144 6 7 8 9 10 Earth Spring Leg Back Light Case REF Plate A REF Plate B ABH7233 AEB7090 AMR7463 AMR7464 AMR7465 11 12 13 14 15 Optical Plate Display Window Display AL Display Panel Display Cover AMR7466 AAK8137 AAP7094 AMB7851 AMC7051 16 17 18 Screw Screw Display Unit www . D E x iao y u163. co m BPZ30P080FZK PSC30P080FNI AXX7163 F XV-DV99 5 C 6 http://www.xiaoyu163.com 7 15 8 1 2 3 http://www.xiaoyu163.com 4 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM QQ 376315150 892498299 B CN101 CN1013 DVD MODULE 20MHz 27MHz G/Y IC301 03SD PU STM6316ATXXA C Y FTS&SPDL DRlVER CN104 system control 13942296513 CN103 DOUT RW Playback (VRmode with CPRM) 3.3V, 1.8V 208pin, PQFP IC802 64M SDRAM IC802 C 64M SDRAM IC851 CN5502 FL/FR DSD DAC IC603 16M FLASH ROM IC871 IC801 IIC DSD DAC Center IC861 DSD DAC SL/SR 376315150 892498299 CN8907 (1/2) CN8906(2/3) JA8251 CN8003 DIGITAL OPT IN1 CN8011 IC8501 DSPD56367 DSP AK4114 IC8201 DIR FM/AM TUNER MODULE CN201 F CN8906(1/3) DolbyDigital Decoder Dolby PrologicII DTS Decoder CN5605 ATTENUATOR IC8001 INPUT SELECTOR - 6dB TV IN www F IC8401 AK4529 8ch CODEC - 10dB CN8401(1/2) LINE 2 IN BUFFER IC8003 DSP ASSY CN8302(1/2) LINE 1 IN E F x iao y u163. co m C 2/2 VIDEO ASSY(2/2) . XV-DV99 16 1 2 3 http://www.xiaoyu163.com 4 CN8007(2/2) D 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 CN943(2/2) QQ QQ EMI SAA7893 HL/C2 SACD LSI CN8908 SW 13942296513 MPEG Video Decoder Video Encoder (withPictureControl) Video DAC (Progressive: 54MHz) Audeo Decoder -DD MPEG JPEG Viewer WMA Playback L CN5604 M63018FP IC101 CN901 CN105 M - M - V 6IN-6OUT CN8301(2/2) + STI5588CVB B/PB TEL TEL LoadMotor MM1623 VlDEO AMP DRlVER BACK END IC *single disc mecha + IC601 FRONT END IC PlCK UP ASSY Steppingtor R/PR IC501 SPINDLE Motor B DVDM ASSY CN8301(1/2) Traverse Mechanism Assy VWT1199 CN8007(1/2) A CN943(1/2) 3.1 BLOCK DIAGRAM 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 JA8871 C 1/2 VIDEO ASSY(1/2) L M N O R/PR KEY G/Y SCART CONNECTOR B/PB V KEY RTOP ASSY KEY R ASSY KEY L ASSY KEY LTOP ASSY COMPOSITE VIDEO OUT C B CN1902 S-VIDEO OUT Y DISPLAY UNIT TEL TEL J CN5601 LCDCONT ASSY 13942296513 13942296513 IR SENSOR LCD IC5501 PDC110B CN5001 micro Processoer CN5102 POWERED SUBWOOFER SPEAKER RELAY ANDREW IC8402 LPF FL/FR OUT IC3301 STK402- 270 + LPF IC3001 M62446AFP E-VOL LPF 6ch E-vol SW OUT 3ch Power Amp CENTRE OUT IC3401 STK402- 270 SW CN8906(3/3) CN5101 CN5201 CN3701 IC8401 SW MIX/GAIN CN8501 CONTROL ASSY CN8401(2/2) FL/FR CN8302(2/2) H K CONNECT ASSY 376315150 892498299 LPF REC OUT SELECT CN8907(2/2) IC3901 E JA3901 CN3902 IC8651 CN3901 SL/SR IC3101 IC3102 IC3103 IC3104 REC OUT IC3902 E-VOL LC75344 I . HP ASSY x iao y u163. co m HEADPHONE OUT LINE OUT F XV-DV99 5 6 D SL/SR OUT 3ch Power Amp Center 376315150 892498299 IC8381 IC8382 C QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 www A http://www.xiaoyu163.com 7 17 8 1 3 http://www.xiaoyu163.com 2 4 3.2 LOAB ASSY and OVERALL WIRING DIAGRAM A QQ 376315150 892498299 D D 1/2 - D 2/2 DSP ASSY (AWX8325) CN8011 O CN8003 KEY LTOP ASSY (AWU8111) CN8007 N KEY L ASSY (AWU8110) E DSP TRADE ASSY (AWU8101) B TEL TEL 13942296513 13942296513 C VIDEO ASSY (AWU8100) D E A www x iao y u163. co m LOAB ASSY (VWG2346) . LOADING MOTOR ASSY : VXX2505 STEPPING MOTOR : VXM1102 PICKUP ASSY-S (OXX8005) SPINDLE MOTOR : VXM1098 XV-DV99 18 1 2 3 http://www.xiaoyu163.com 4 DVDM ASSY (AWM7813) F A B B 1/4 - B 4/4 CN943 376315150 892498299 376315150 892498299 C QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 K J LCDCONT ASSY (AWU8119) Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". I CONNECT ASSY (AWU8118) HP ASSY (AWU8102) L M G KEY RTOP ASSY (AWU8113) F KEY R ASSY (AWU8112) TXTRADE ASSY (AWU8114) A FM/AM TUNER MODULE (AXQ7229) CN5102 CN201 CN5001 B TEL TEL 13942296513 13942296513 QQ QQ CN901 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 B H H 1/3 - H 3/3 C D E CONTROL ASSY (XV-DV99 : AWU8099) (XV-DV990 : AWU8148) www . x iao y u163. co m F A XV-DV99 5 6 http://www.xiaoyu163.com 7 19 8 1 3 http://www.xiaoyu163.com 2 4 3.3 DVDM ASSY(1/4) A QQ 376315150 892498299 B 1/4 DVDM ASSY (AWM7813) A B CN601 TEL TEL (S) (S) (S) 13942296513 13942296513 STEPPING MOTOR (S) (S) (S) C (F) (S) (S) (F) (T) 3 D (F) (F) (T) (T) E PICKUP ASSY-S CN1013 (RF) (RF) www F B 1/4 (RF) x iao y u163. co m (RF) (RF) . (RF) XV-DV99 20 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ (T) SPINDLE MOTOR 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 (RF) (DVD) (F) (T) (DVD) (S) A : RF SIGNAL ROUTE : DVD DATA SIGNAL ROUTE : FOCUS SERVO LOOP LINE : TRACKING SERVO LOOP LINE : STEPPING SERVO LOOP LINE (DVD) (DVD) B 2/4 B TEL TEL 4 (DVD) 13942296513 13942296513 QQ 376315150 892498299 (RF) (RF) (RF) (RF) (RF) (RF) 2 D 1 www . (RF) (RF) (RF) (RF) E (RF) 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 (RF) QQ 5 C x iao y u163. co m B 4/4 : The power supply is shown with the marked box. F B 1/4 XV-DV99 5 6 http://www.xiaoyu163.com 7 21 8 1 2 3 http://www.xiaoyu163.com 4 3.4 DVDM ASSY(2/4) A QQ 376315150 892498299 B 4/4 B TEL TEL B 4/4 13942296513 13942296513 C E (DVD) (AD) (AD) (AD) B 2/4 (C/V) (C) (Y) (CY/G) (Cr/R) . (Cb/B) x iao y u163. co m (DVD) www F (DVD) XV-DV99 22 1 2 (AD) 3 http://www.xiaoyu163.com 4 (DVD) 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 B 2/4 DVDM ASSY (AWM7813) (DVD) (Cr/R) (CY/G) (Cb/B) (Y) (C) (C/V) (AD) A : DVD DATA SIGNAL ROUTE : VIDEO SIGNAL ROUTE (Cr/R) : VIDEO SIGNAL ROUTE (CY/G) : VIDEO SIGNAL ROUTE (Cb/B) : S VIDEO SIGNAL ROUTE (Y) : S VIDEO SIGNAL ROUTE (Y) : S VIDEO SIGNAL ROUTE (C/V) B : AUDIO DATA SIGNAL ROUTE TEL TEL (AD) 13942296513 13942296513 (AD) B 3/4, 4/4 (AD) B 3/4 (C) QQ (AD) (C/V) 376315150 892498299 (C) B 3/4 (C/V) (Y) (CY/G) (Y) 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 8 (C) (C) (AD) QQ B 4/4 (C/V) (Cb/B) (Y) C D 7 (C/V) (Y) (CY/G) E (CY/G) (Cb/B) (Cb/B) (AD) (Cr/R) (Cr/R) (Cr/R) (AD) 9 10 (AD) (AD) www . (DVD) x iao y u163. co m (DVD) (DVD) 11 B 4/4 F B 1/4 B 2/4 XV-DV99 5 6 http://www.xiaoyu163.com 7 23 8 1 2 3 http://www.xiaoyu163.com 4 3.5 DVDM ASSY(3/4) A QQ 376315150 892498299 B TEL TEL C (AD) (AD) E www F B 3/4 . x iao y u163. co m XV-DV99 24 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 13942296513 13942296513 (AD) B 2/4 B 2/4 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 (AD) B B 3/4 DVDM ASSY (AWM7813) 13942296513 13942296513 (AD) B TEL TEL (AD) B 4/4 B 2/4 C QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 A (AD) H 1/3 CN5604 (AD) : AUDIO DATA SIGNAL ROUTE D E www . x iao y u163. co m : The power supply is shown with the marked box. F B 3/4 XV-DV99 5 6 http://www.xiaoyu163.com 7 25 8 1 2 3 http://www.xiaoyu163.com 4 3.6 DVDM ASSY(4/4) A QQ 376315150 892498299 B 3/4 B 2/4 B TEL TEL 13942296513 13942296513 C (FL) (C) (SW) (SL) (AD) (AD) E www B 2/4, 3/4 F (AD) B 2/4 B 2/4 B 1/4 B 4/4 (AD) x iao y u163. co m (AD) . (AD) XV-DV99 26 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 (FL) (FL) B 4/4 DVDM ASSY (AWM7813) A (FL) (FL) (FL) B (FL) TEL TEL (C) (FL) (FL) (SW) (FL) (SL) C CN8301 13942296513 13942296513 B 2/4 (CY/G) (SL) (Cb/B) (Cr/R) (C) TEL 13942296513 (C) (SW) (C/V) 376315150 892498299 (C) (Y) (C) (SW) (Cr/R) (SL) (SL) (CY/G) (Cb/B) (Y) (C) (C/V) (SL) 376315150 892498299 QQ 3763 1515 0 89 2498 299 (SW) (SW) QQ QQ (C) www (AD) (FL) (SL) (C) (SW) : VIDEO SIGNAL ROUTE (CY/G) E : VIDEO SIGNAL ROUTE (Cb/B) : S VIDEO SIGNAL ROUTE (Y) : S VIDEO SIGNAL ROUTE (Y) : S VIDEO SIGNAL ROUTE (C/V) : AUDIO DATA SIGNAL ROUTE : AUDIO SIGNAL ROUTE (Front L ch) : AUDIO SIGNAL ROUTE (Surround L ch) : AUDIO SIGNAL ROUTE (Center ch) : AUDIO SIGNAL ROUTE (Sub Woofer ch) 6 http://www.xiaoyu163.com 7 F B 4/4 XV-DV99 5 D : VIDEO SIGNAL ROUTE (Cr/R) x iao y u163. co m (SL) . C 27 8 1 2 3 http://www.xiaoyu163.com 4 3.7 VIDEO and DSP TRADE ASSYS A QQ 376315150 892498299 (Y) (FL) (C/V) (C) (Cr/R) (CY/G) (FL) B 4/4 CN943 B (FL) (Cb/B) (SL) (SW) (FL) (SW) (SL) (C) (SL) TEL TEL (SW) (C) (C) 13942296513 13942296513 (FL) (SL) (SL) C D 1/2 CN8003 376315150 892498299 QQ 3763 1515 0 89 2498 299 (AD) (D) (D) (AD) (D) D (FL) D 1/2 CN8007 (FL) (C) (C) (FL) (FL) (SL) (SL) (SW) (SW) (C) (C) E (SW) F www C E E x iao y u163. co m (AD) D 2/2 CN8011 (SW) . H 1/3 CN5502 DSP TRADE ASSY (AWU8101) XV-DV99 28 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 TEL 13942296513 QQ QQ (D) 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 H 3/3 CN8401 C VIDEO ASSY (AWU8100) A (FL) (C/V) (C/V) (C/V) (C/V) (Y) (Y) (Y) (C) (C) (C) B (C) TEL TEL (C/V) (FL) (FL) (SL) (C) (SW) (FL) : The power supply is shown with the marked box. 13942296513 (Cr/R) (Cb/B) (SL) (CY/G) (Cb/B) 376315150 892498299 (C) (Y) (FL) (FL) (Y) (C/V) (C) (CY/G) (FL) (FL) AV CONNECTOR 376315150 892498299 (Cr/R) (C) (C/V) (Cb/B) (D) (Cb/B) (CY/G) (SW) (Cr/R) (C) C QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 D E (Cr/R) (C) (Y) (C/V) (D) 13942296513 (Y) (CY/G) (D) (D) www (Y) (C/V) x iao y u163. co m (Cr/R) (CY/G) . CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TYPE NO. 49101.5F MFD, BY LITTELFUSE INK. FOR IC5601 (AEK7065). (Cb/B) (Y) (C) (C/V) (FL) : VIDEO SIGNAL ROUTE (Cr/R) (SL) : VIDEO SIGNAL ROUTE (CY/G) (C) : VIDEO SIGNAL ROUTE (Cb/B) : S VIDEO SIGNAL ROUTE (Y) (SW) (D) : S VIDEO SIGNAL ROUTE (Y) (AD) : S VIDEO SIGNAL ROUTE (C/V) : AUDIO SIGNAL ROUTE (Front L ch) : AUDIO SIGNAL ROUTE (Surround L ch) : AUDIO SIGNAL ROUTE (Center ch) F : AUDIO SIGNAL ROUTE (Sub Woofer ch) : AUDIO SIGNAL ROUTE (DIGITAL ch) C : AUDIO DATA SIGNAL ROUTE XV-DV99 5 6 http://www.xiaoyu163.com 7 29 8 1 3 http://www.xiaoyu163.com 2 4 3.8 DSP ASSY(1/2) A QQ 376315150 892498299 D 1/2 DSP ASSY (AWX8325) (AD) (FL) (SL) (C) (SW) (D) : AUDIO DATA SIGNAL ROUTE : AUDIO SIGNAL ROUTE (Front L ch) : AUDIO SIGNAL ROUTE (Surround L ch) : AUDIO SIGNAL ROUTE (Center ch) : AUDIO SIGNAL ROUTE (Sub Woofer ch) : AUDIO SIGNAL ROUTE (DIGITAL ch) B TEL TEL 13942296513 13942296513 (D) C (AD) (D) (D) (AD) D (AD) (D) (D) (AD) (D) (D) (D) E D 2/2 (D) (AD) (AD) D 2/2 D 2/2 www F D 1/2 (AD) . x iao y u163. co m XV-DV99 30 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 (AD) (AD) QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 A B (FL) TEL TEL (FL) (FL) CN8902 (SW) E 13942296513 (SL) (FL) (AD) (SL) (SW) (C) (AD) 13942296513 (FL) (AD) (AD) (AD) (C) QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C (AD) (D) D (D) (D) (D) (AD) E (AD) (AD) www . x iao y u163. co m E CN8901 : The power supply is shown with the marked box. F D 1/2 XV-DV99 5 6 http://www.xiaoyu163.com 7 31 8 1 2 3 http://www.xiaoyu163.com 4 3.9 DSP ASSY(2/2) A QQ 376315150 892498299 D 2/2 DSP ASSY (AWX8325) B TEL TEL D 1/2 (AD) 13942296513 13942296513 (AD) (AD) (AD) (AD) (AD) C D 1/2 D 1/2 E www F D 2/2 . x iao y u163. co m E CN8903 XV-DV99 32 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 (AD) A : AUDIO DATA SIGNAL ROUTE B TEL TEL 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C D E www . x iao y u163. co m D 2/2 XV-DV99 5 F : The power supply is shown with the marked box. 6 http://www.xiaoyu163.com 7 33 8 1 3 http://www.xiaoyu163.com 2 4 3.10 FM/AM TUNER MODULE A QQ 376315150 892498299 F FM/AM TUNER MODULE (AXQ7229) B FM FRONT END (FM) TEL TEL 13942296513 (FM) 13942296513 (FM) (FM) (FM) (FM) C (FM) (AM) (FM) (AM) (AM) MW RF TUNING BLOCK (AM) (FM) D (AM) OSC : 981 - 2052kHz 9k step E F F www . x iao y u163. co m XV-DV99 34 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 (FM) (AM) QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 A : The power supply is shown with the marked box. (TX) (AM) (FM) : AUDIO SIGNAL ROUTE (Tuner L ch) : AM SIGNAL ROUTE : FM SIGNAL ROUTE B CN201 (AM) (AM) (AM) (TX) (FM) G (AM) (FM) (AM) (AM) (TX) QQ 3763 1515 0 89 2498 299 (TX) (FM) (TX) 376315150 892498299 376315150 892498299 (FM) (AM) C QQ QQ (TX) TEL 13942296513 13942296513 13942296513 CN5702 (AM) TEL TEL (AM) L201 ATE7003 D E www . x iao y u163. co m F F XV-DV99 5 6 http://www.xiaoyu163.com 7 35 8 1 2 3 http://www.xiaoyu163.com 4 3.11 TATRADE and CONTROL(1/3) ASSYS A QQ 376315150 892498299 H 3/3 B 13942296513 13942296513 R5511 XV-DV99 : 47k XV-DV900 : 12k C CN8908 C H 3/3 (AD) H 2/3 E www K CN5101 F H 1/3 . x iao y u163. co m XV-DV99 36 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ D TEL TEL XV-DV900 ONLY 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 : The power supply is shown with the marked box. A CN201 G TXTRADE ASSY (AWU8114) F (TX) (TX) B TEL TEL (TX) 13942296513 13942296513 ASSY H 1/3 CONTROL (XV-DV99 : AWU8099) (XV-DV990 : AWU8148) QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 (TX) (AD) B 3/4 CN901 QQ H 2/3 C H 2/3 H 2/3 D E www L . x iao y u163. co m CN1902 To Sub Woofer F B H 2/3, 3/3 H 3/3 (AD) (TX) : AUDIO DATA SIGNAL ROUTE : AUDIO SIGNAL ROUTE (Tuner L ch) G H 1/3 XV-DV99 5 6 http://www.xiaoyu163.com 7 37 8 1 3 http://www.xiaoyu163.com 2 4 3.12 CONTROL(2/3) and HP ASSYS A QQ 376315150 892498299 (TV) (TV) (TX) (L1) (TX) (TV) (L1) (FL) (FL) (L1) (FL) B (FL) (FL) (FL) C (FL) (FL) (FL) (FL) H 1/3 H 1/3 E (FL) (FL) (FL) www F H 2/3 I . (FL) x iao y u163. co m XV-DV99 38 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 13942296513 13942296513 (TX) TEL TEL (TX) 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 (FL) (TV) (L1) (TX) ASSY H 2/3 CONTROL (XV-DV99 : AWU8099) : AUDIO SIGNAL ROUTE (Front L ch) : AUDIO SIGNAL ROUTE (TV L ch) A (XV-DV990 : AWU8148) : AUDIO SIGNAL ROUTE (LINE 1 L ch) : AUDIO SIGNAL ROUTE (Tuner L ch) H 1/3 (FL) (FL) (FL) (FL) H 3/3 B TEL TEL 13942296513 13942296513 (TX) H 1/3 (TX) (TX) (FL) (FL) (FL) (FL) QQ QQ (FL) (FL) (FL) (FL) (FL) 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 24H93/38 299 TEL 13942296513 C (FL) H 1/3, 3/3 (FL) (FL) H 3/3 D E (FL) (FL) www . x iaoIy u163. co m F HP ASSY (AWU8102) : The power supply is shown with the marked box. H 2/3 I XV-DV99 5 6 http://www.xiaoyu163.com 7 39 8 1 2 3 http://www.xiaoyu163.com 4 3.13 CONTROL ASSY(3/3) A QQ 376315150 892498299 H 1/3 (FL) (FL) (FL) H 2/3 H 2/3 (FL) (FL) (FL) CN8302 C (FL) (SL) (C) (C) (SW) (SW) (SL) (FL) (C) (FL) C (SW) (FL) 376315150 892498299 D (FL) (C) (FL) (FL) (SW) E H 2/3 H 3/3 . x iao y u163. co m H 1/3 www F XV-DV99 40 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ (FL) 13942296513 13942296513 (SL) TEL TEL (FL) B H 2/3 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 ASSY H 3/3 CONTROL (XV-DV99 : AWU8099) (XV-DV990 : AWU8148) (FL) (FL) (FL) A (FL) (FL) (FL) B (FL) TEL TEL 13942296513 (SL) (SL) QQ (SL) (FL) To Sub Woofer (SL) 376315150 892498299 (C) (C) A (C) (SW) (C) (SW) D (SW) E (SW) 376315150 892498299 QQ 3763 1515 0 89 2498 299 (FL) QQ (SW) TEL 13942296513 C (FL) 13942296513 (SL) www x iao y u163. co m (SW) . (FL) (SL) H 1/3 H 2/3 (C) : The power supply is shown with the marked box. (SW) : AUDIO SIGNAL ROUTE (Front L ch) F : AUDIO SIGNAL ROUTE (Surround L ch) : AUDIO SIGNAL ROUTE (Center ch) : AUDIO SIGNAL ROUTE (Sub Woofer ch) H 3/3 XV-DV99 5 6 http://www.xiaoyu163.com 7 41 8 1 2 3 http://www.xiaoyu163.com 4 3.14 LCDCONT, CONNECT, KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS A QQ 376315150 892498299 K CONNECT ASSY (AWU8118) KEY R ASSY S1901 : 0 (OPEN/CLOSE) H 1/3 KEY RTOP ASSY S1902 : 7 (STOP) S1903 : 6 (PLAY/PAUSE) CN5201 KEY L ASSY S1904 : STANDBY/ON KEY LTOP ASSY S1905 : + VOL S1906 : – B TEL TEL 13942296513 13942296513 C L KEY RTOP ASSY (AWU8113) D E F www x ao y u163. co m R ASSY M KEY (AWU8112) N KEY L ASSY (AWU8110) . i K L M N O XV-DV99 42 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 O KEY LTOP ASSY (AWU8111) QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 J A LCDCONT ASSY (AWU8119) B TEL TEL 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C H 1/3 CN5601 D E www . x iao y u163. co m F J K L XV-DV99 5 6 http://www.xiaoyu163.com 7 43 8 1 2 3 http://www.xiaoyu163.com 4 3.15 WAVEFORMS QQ 376315150 892498299 Note : The encircled numbers denote measuring point in the schematic diagram. A B DVDM ASSY Measurement condition ; No. 1, 2 and 12 to 17 : MJK1, Title 1-chp 1 No. 8 : CD, ABEX-784 Track 1 1 IC301 - pin 4 [RFOUT] V: 200mV/div. H: 0.1µsec/div. 2 B No. 13, 14 and 17 : DVD-REF-A1, T2-Chap.1 No. 3 to 5 : DVD-REF-A1, T2-Chap.19 IC301 - pin 36 [FG] V: 1V/div. H: 5msec/div. 3 IC101 - pin 14 [A1], 13 [A2], 12 [A3] V: 2V/div. H: 2msec/div. GND 4 [Tray is opening] [Tray is closing] [PLAY] V: 2V/div. H: 500nsec/div. [STOP] V: 2V/div. H: 500nsec/div. 6 STOP PLAY IC501 - pin 23 [Composite Video out] V: 1V/div. H: 10µsec/div. 7 IC501 - pin 21 [S Video out-Y] V: 1V/div. H: 10µsec/div. 8 IC501 - pin 26 [S Video out-C] V: 1V/div. H: 10µsec/div. 7 D 8 9 IC501 - pin 20 [Component Video out-Y] V: 1V/div. H: 10µsec/div. - pin 18 [Component Video out-Pb] 10 IC501 V: 2V/div. H: 10µsec/div. - pin 16 [Component Video out-Pr] 11 IC501 V: 2V/div. H: 10µsec/div. 9 E 10 11 www F . x iao y u163. co m XV-DV99 44 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 PLAY Accelerator ON QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 Brakes ON 13942296513 13942296513 IC301 - pin 44 [SPDL_PDM] [PLAY → STOP → PLAY] V: 2V/div. H: 1sec/div. TEL TEL 5 C IC301 - pin 55 [LOAD_DRV] V: 1V/div. H: 500nsec/div. [Tray stops] 6 http://www.xiaoyu163.com 5 7 8 4. PCB CONNECTION DIAGRAM QQ 376315150 892498299 NOTE FOR PCB DIAGRAMS : 1. Part numbers in PCB diagrams match those in the schematic diagrams. 2. A comparison between the main parts of PCB and schematic diagrams is shown below. Symbol In PCB Diagrams Symbol In Schematic Diagrams B C E B C E Part Name A 3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram. 4. View point of PCB diagrams. Capacitor Connector Transistor B C E B C E B C SIDE A E Transistor with resistor B C E D G S D B G S Field effect transistor D G S SIDE B Chip Part P.C.Board TEL TEL Resistor array 13942296513 13942296513 3-terminal regulator QQ QQ SIDE A SIDE B A LOAB ASSY A LOAB ASSY VNP1836-C LOAB PNE-1B1 1 5 1 CN601 5 VWG 1 C102 C101 5 (VNP1836-C) (VNP1836-C) LOAD+ LOAD- SW2 VWG2279VWG2346- CN602 1 2 5 V+3D (V+5D) S101 5 CN601 1 E CN601 B CN103 M D CN602 CN601 CN602 376315150 892498299 4.1 LOAB ASSY GND 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C CN602 LOADING MOTOR ASSY www . A x iao y u163. co m F A XV-DV99 5 6 http://www.xiaoyu163.com 7 45 8 1 3 http://www.xiaoyu163.com 2 4 4.2 DVDM ASSY QQ 376315150 892498299 Q929 Q211 C212 R213 Q212 L390 C393 C202 R204 Q202 R203 R214 C304 R833 R832 R831 R830 R829 UP SIDE 30 CN943 1 CN943 C757 R735 C870 C854 C874 C863 C853 D741 C857 R790 C758 R859 R858 C850 R869 R1002 R1001 R879 R737 R738 C877 LETTER SQUEEZE VSEL2 R773 VSEL1 C773 R794 GNDA SR C794 R793 GNDA C793 SL R758 GNDA C756 LFE R757 C755 GNDA C GNDA FR GNDA 1 FL G C851 R843 R844 R878 C871 R1003 C809 CN953 30 R722 1 D742 R774 C774 R789 C860 XV-DV99 2 C CN8301 R966 R965 R964 1 R967 C571 R571 R591 C1562 R1069 Q761 Q762 D743 R753 R755 R734 R739 C798 D C797 D781 C799 R687 R691 R692 R684 CONTACT SIDE Q741 (ANP7480-A) 46 1 CN904 11 R111 R300 X301 R394 R592 Q742 R4 R3 R1 R2 C816 C815 C810 R836 C814 C811 C808 R837 E R838 C801 IC801 R823 C830 R868 R828 64 R827 R826 C803 C802 R884 102 C813 A CN601 - + 1 AD AD 2 +3D W LO LO SW V S V+5D R211 Q201 5 4 R378 R385 R386 R379 C564 R772 R768 R788 R792 D782 R787 R754 R791 R756 Q781 C795 R834 R887 R816 65 C812 R819 R820 CN103 C103 SIDE 5 CONTACT 1 CN103 R201 8 1 100 76 R369 R307 R360 C651 R636 Q764 R611 R608 R607 R618 R605 R606 Q782 R736 128 R882 R847 C824 R885 C861 R894 C864 C867 IC804 E R760 R770 C750 C605 20 1 Q763 C1563 R561 R621 C614 1 R694 R695 R688 R685 R664 R689 29 C659 IC805 R807 R801 C231 C221 42 R131 C134 R135 R392 C390 RFOUT R365 R366 R641 R665 R663 R769 R662 C649 C640 39 R767 R771 52 C648 105 4 1 1 R600 C600 R881 R880 R810 C804 R809 R808 R806 R813 R812 R815 IC481 C484 R1005 . R617 R775 R616 x iao y u163. co m C482 R482 C561 D761 C873 R895 65 R1006 R817 55 R818 102 R1004 38 B 1 H R825 R603 R602 R590 R562 R890 R888 4 4 R886 R835 R824 1 103 www 4 1 1 C825 38 64 F 5 128 IC801 11 1 C4831 R804 C807 E R848 8 1 3 4 R814 55 R681 C604 R619 R593 C1564 R682 R889 R893 39 IC481 24 2 30 R686 30 C828 10 IC806 IC804 29 1 R485 C805 C806 R811 R481 C481 7 23 2 R629 R672 20 11 R839 R805 C827 IC806 C698 C684 2 2 R883 C601 D601 CN608 IC805 R648 R634 R647 C637 R635 C623 1 C671 R595 R637 208 208 11 R803 R822 R821 R802 F Q741 E 8 R421 C661 C357 R362 R638 R683 1 Q722 R721 C362 R594 C650 R639 C647 R626 C636 4 IC691 156 157 C691 5 157 IC601 C692 L691 R698 CN607 C660 Q781 Q742 R644 C421 R640 IC421 Q782 3 C305 SY 30 GNDD V GNDD SC GNDD Cr/R GNDD Cb/B GNDD CY/G 20 RGB P/XI ASPECT 1 Q764 C139 C127 C128 C130 C323 C124 C126 C335 R346 R344 C348 C342 R657 R656 R652 R655 R651 R654 R653 R364 R675 53 52 1 R368 R309 R308 C664 C607 23 5 L411 L421 C422 Q761 ST2ST2+ ST1+ ST1C142 R338 R935 R342 D928 D922 SIDE D402 R402 C406 C310 C309 R613 R612 C690 R609 R610 C619 C133 R123 R124 R389 R925 R924 R926 R923 Q922 Q923 D923 LOADLOAD+ C121 R197 Q193 R151 C151 C644 R192 C135 C102 CONTACT SIDE L192 L191 L194 L193 R932 R934 R933 D926 D925 IC401 R407 R410 1 CN609 C461 2 R461 L641 24 R658 C652 R398 R397 C681 104 IC411 IC461 C112 R905 R904 R903 R902 Q911 R984 R922 R901 R931 R906 R907 R400 4 4 3 3 5 C407 11 R416 R411 C409 L402 C113 CONTACT SIDE R952 R954 R956 R958 R953 R955 R957 R959 C921 R963 R960 R962 R961 C951 R951 D432 C451 C452 R433 IC901 8 C441 R444 C433 14 C463 9 R363 L361 53 7 1 D401 8 C411 R696 10 R336 C R337 R339 R340 C346 10 R354 9 C354 R628 X601 R969 QQ 3763 1515 0 89 2498 299 C301 156 IC421 Q762 Q763 75 C211 3 http://www.xiaoyu163.com 4 B 376315150 892498299 IC691 C423 C424 75 R673 IC604 C382 C377 R384 R383 R382 CN301 2 C373 R367 C630 C425 51 51 R361 105 24 23 IC601 25 C388 C622 IC604 C391 C383 R302 R396 Q928 104 D 1 100 NP 50 C694 C621 1 26 Q927 C R697 C412 D C326 C201 30 C415 C300 QQ R693 C414 Q921 R341 C634 RFIN 25 R212 1 2 C413 B C311 C318 B C306 IC301 LD2 11 D R462 C641 R620 C642 C132 GNDD R202 Q390 R390 C394 C392 R310 R301 R391 C302 Q930 R938 R939 R937 R936 R332 C307 C303 C312 R333 C315 C308 R334 1 376315150 892498299 Q722 2 1 2 CN123 IC201 LD1 50 QQ C410 C462 1 A C405 R403 Q401 C491 TEL 13942296513 IC411 IC461 1 R409 R408 A Q927 IC301 Q928 D927 22 26 Q922 R196 R199 R220 R221 R222 C222 R223 13942296513 IC401 C434 C401 IC441 C442 R443 R442 R441 1 Q192 C901 R909 R908 8 5 44 1 IC101 Q925 CN124 Q926 4 Q390 Q923 Q930 14 C408 13942296513 11 IC431 R401 C432 C404 Q929 8 1 R191 R194 TEL 5 5 C403 IC441 Q401 Q921 7 R102 C114 R101 8 C431 7 7 Q202 Q193 R921 R918 C902 2 1 CN121 1 TEL C C443 Q902 Q925 IC901 Q926 IC101 Q192 IC431 IC201 Q201 Q211 23 SIDE 1717 C118 C116 C101 21 1 1 1 Q911 R982 CONTACT C120 24 24 24 2 30 1 D431 CN101 1 1 CN104 44 1 UP SIDE B 1 1 CN122 B CN105 C 24 UP SIDE Q451 Q951 Q921 R981 Q951 CN101 5 R451 Q451 UP CN921 R983 1 1 V+5S GNDD H1+ H3A1 H3+ A2 H2A3 H2+ H1- A 12 12 1 CN901 1.INSIDE 1 30 30 CN104 R968 CN105 SIDE A PICKUP ASSY-S CN1013 23 CN901 CN5604 STEPPING MOTOR 2 H SPINDLE MOTOR 1 B DVDM ASSY BOTTOM SIDE SIDE A BOTTOM SIDE A 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 SIDE B SIDE B A B DVDM ASSY UP SIDE UP SIDE UP SIDE CN931 LF 24 24 CN111 R1012 1 30 11 1 17 17 1 30 30 CN941 2 2 1 C232 R1013 HEAT-RESISITANCE PRE-FLAX 30 CONTACT SIDE 22 R1011 30 23 23 1 CONTACT SIDE 11 29 CN911 A B C 14 1 28 54 0 1 2 3 4 5 6 7 8 9 GNDS V+3D CLAMP DISCSENS TRYPOS OPEN SEDR+ SEDR- 27 1 1 13 C903 R690 10 11 1 R744 R746 C742 R748 20 R785 C783 R781 C752 R782 C784 C862 1 C866 20 R863 R862 R861 C785 R783 R752 C748 R786 C746 R750 R784 C786 C865 10 11 R867 14 R645 R643 R646 C744 R742 C856 F C823 IC741 IC781 IC861 C822 R896 R841 28 54 28 1 4 1 1 1 R483 IC807 6 http://www.xiaoyu163.com IC803 C821 R842 C820 C819 C817 C818 C826 IC802 IC871 27 27 1 R840 R845 IC851 IC802 IC803 4 8 C872 IC871 5 1 20 C829 R872 R871 R870 C788 C782 5 C787 C781 C875 1 R873 54 R860 8 10 11 10 R866 R865 11 C876 20 IC761 E F B XV-DV99 5 IC603 D 24 (ANP7480-A) B Q603 Q745 Q744 1 1 26 1 0 2 0 1 0 1 2 3 8 15 14 28 Q511 Q977 R422 C626 C639 C625 C643 D603 R633 R632 R649 R650 R601 R604 C792 R864 15 7 R630 R666 C764 R762 C767 C768 8 14 28 1 R417 R625 ICT FC C762 1 5 R874 R875 R876 IC602 IC603 1 R846 IC807 Q541 25 C603 IC861 1 5 Q551 376315150 892498299 R622 C749 C789 F R877 Q531 Q501 R671 R631 C QQ R414 R415 R615 R627 Q603 R699 54 13942296513 L401 R404 R181 C181 R177 C177 R180 R179 R614 R623 R413 R670 C791 C754 8 3 4 1 2 3 4 5 6 7 8 9 Q521 C624 TEL 14 R183 R169 R170 C171 R171 R166 R168 C631 C633 C632 1 R642 x iao y u163. co m IC851 28 R853 R852 C602 1 2 3 4 5 6 7 8 9 Q746 4 R759 4 . R154 C155 R156 R155 D924 R661 R660 R659 R512 28 R674 C761 1 C741 C855 C852 R857 R850 C628 R766 C753 C751 R749 R745 R741 www R851 R856 R855 R854 C620 R1623 1 2 3 4 5 6 7 8 9 R624 R502 R513 8 1 R779 C763 R761 C747 R751 R747 C743 15 C859 C858 R178 48 IC741 C745 R743 DVDM ASSY R412 R765 IC781 IC151 IC602 R764 C772 C766 Q745 Q746 Q744 C765 R763 IC761 C769 SIDE R930 R929 R928 R927 27 Q977 C771 C501 R501 C511 R511 R977 R740 R970 R972 R974 R976 C163 C176 R176 R175 R173 C174 R523 R503 R522 C562 C172 R172 C635 C627 C638 C629 R543 1 R1056 R1057 R1058 R1059 R1060 R1061 R971 R973 R975 R157 C158 R159 R158 C160 R164 R165 R142 R143 R355 14 28 C521 R521 Q924 R405 D403 25 25 27 27 R167 C167 R174 R542 C563 1 IC151 QQ 3763 1515 0 89 2498 299 R533 R552 R553 R541 R152 R153 C152 26 Q194 AWM7 0 0 0 -A R532 C565 IC501 15 CONTACT SIDE UP SIDE 376315150 892498299 C1056 C402 C182 R182 R9531 Q531 R9551 Q551 R9541 Q541 R9521 Q521 R9501 Q501 R9511 Q511 C531 R531 C551 R551 C541 R431 R432 R163 13 IC911 Q191 R406 R375 D301 1 1414 TEL 13942296513 C1051 C1052 C1053 C1054 C1055 2 B C913 C911 R917 C355 R381 C313 R374 R916 R162 C161 R195 R198 R343 C381 R345 R387 QQ R370 R376 8 R330 R331 R380 R373 CN113 Q194 R126 R128 R329 R328 R395 1 7 IC911 Q924 R306 R399 R1970 CN114 R304 R303 R393 88 Q452 R454 R914 R161 R160 R125 13942296513 R113 R112 R189 R100 R127 C214 C213 11 R193 Q191 R144 C125 C204 C203 TEL R118 R119 R120 R115 R116 R117 R106 R107 R108 R452 R915 R190 R103 R104 R105 R305 C200 R200 CONTACT C199 C215 C205 R110 R109 CN112 R210 C210 NORMAL SOLDER LEAD FREE SOLDER R388 VPR+8M SYS_CS2 GNDM SCLK GNDM SDATA GNDD 30.VDVD+12 MDATA VPR+8 GNDD ACK VPR+8 DOUT 10.GNDD VPR+8M 20.GNDD GNDD GNDD VDET DVDPOWER ZERO XDVDRST DVDMUTE SYS_CS1 Q452 XVMUTE TXD R453 RXD RTS R912 1.CTS R911 R913 C912 C230 D921 CONTACT SIDE C233 7 47 8 1 3 http://www.xiaoyu163.com 2 4 4.3 VIDEO and DSP TRADE ASSYS A QQ 376315150 892498299 SIDE A C VIDEO ASSY R R GP1FA5 5 C8865 2 R8348 C83 R8313 C8 C8 E 1 1 376315150 892498299 P DTERM ASSY COMPONENT ASSY CN55 1/2 9 1 2 3 4 5 6 8 2 1 W118 GNDD FR1S P GNDD COMPONENT ASSY AWU8116 W117 CN8962 W119 GNDD GNDD W122 GNDD W121 5 FR1S P CN8951 JA8951 5 GNDD W123 AWU8117 CN8961 W116 GNDD 1 W120 GNDD DTERM ASSY 7 CONTACT SIDE CN8951 1 CN8961 1 1 7 1/2 E (ANP7482-A) (ANP7482-A) Q8873 Q8871 Q8872 F C www . Q8842 Q8841 Q8832 Q8831 IC8862 IC8861 IC8251 Q8321 x iao y u163. co m XV-DV99 48 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 515 0 89 2498 299 QQ 376H3 1CN8401 CN8302 QQ QQ P C83 R8345 R8314 C8316 FL DSPOUT C8315 TEL 13942296513 D C R8312 FR CN8302 B CN943 R8346 R8347 C8343 SL GNDA CN8301 R8255 C8258 1 Q8321 R8319 VA+12 C8363 AWU8106 SR CN8303 C CN8302 7 8 AWU8104 C8344 GNDD 18 C8364 SW R8311 11 VA-12 C8257 VIDEO ASSY AWU8100 R8322 C8321 C8813 30 30 14 14 R8257 C8260 C8801 C8802 C8868 C8867 C8863 C8884 11 R8256 C8261 R8321 R8833 CN8301 C8812 C8862 R8862 R8876 D8871 R8875 R8848 Q8842 R8841 D8841 Q8831 C8832 R8832 R8831 C8831 C8864 C8879 CN8811 7 CN8812 C8811 Q8832 R8849 3 IC8861 30 7 R8844 R8842 R8843 C8882 C8843 R8845 C8842 R8847 R8846 1 IC8251 30 R8883 C8883 JA VD+5 13942296513 CN8812 Q8841 Q8872 6 C8252 TEL 13942296513 1 1 C8841 3 IC8862 C8861 4 JA8252 JA8251 CN8802 12.GNDA 11.SCRTOR 10.GNDA 9.SCRTOL 8.GNDA 7.LIN 6.GNDA 5.RIN 4.GNDA 3.SCRTIR 2.GNDA 1.SCRTIL R8835 4 30.S Y 29.GNDD 28.S V 27.GNDD 26.S C 25.GNDD 24.Cr/R 23.GNDD 22.Cb/B 21.GNDD 20.CY/G 19.PGB 18.P/XI 17.ASPECT 16.LFTTER 15.SQUEEZE 14.VSEL2 13.VSEL1 12.GNDA 11.SR 10.GNDA 9.SL 8.GNDA 7.LFE 6.GNDA 5.C 4.GNDA 3.FR 2.GNDA 1.FL TEL (D-CONECTOR) CN8811 (COMPONENT) 6 1 C8881 Q8871 R8894 Q8873 R8891 B R8834 R8892 R8889 R8893 R8890 JA8871 1 JA8801 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 SIDE A R A GP1FA5**RZ DC FC ATTENTION CN8901 D CN8003 CN8902 D CN8007 CN8901 2323 1 1 23 23 CN8902 CN8904 1 1 23 2323 1 DSP TRADE ASSY CN8904 CN8906 23 1 1 12323 D CN8011 CN8903 CN8903 23 1 123 CE3 CN8905 AWU8101 CN8907 CN8907 REPLACE WITH SAME TYPE #49101.5F FOR IC5601 MFD. 1 BY LITTELFUSE INC. 1 R8388 D1003 C1006 CAUTION C1014 D1005 C1013 C1004 C1011 C1012 L1002 C1005 IC1003 (ANP7481-B) KN8802 R1002 D1004 R8901 C8909 R8905 C8913 IC8382 R8389 Q8381 IC1002 L1001 IC5601 CN8906 R8906 C8914 R8380 R8383 R8382 R8387 R8386 IC8381 D8383 D8382 CN8908 Q8383 C1003 R8385 R8384 1 1 30 30 Q8382 49101.5 AEK7065 376315150 892498299 IC5601 1919 16.DECMUTE 17.DSPMUTE 18.DSPMUTEW 19.0MUTE 20.DVDMUTE 21.GNDU 22.GNDU 28.VD+5 29.XPROTECT 30.VA-12 C8392 1 7.DIRCS 8.DIRDO 9.DSPMODE 10.DSPHREQ 11.DSPSS 12.DSPRST 13.DSPCK 14.DSPDO 15.DSPDI R8391 R8392 1 23.OPTIN 24.GNDDR 25.GNDDR 26.VPR+8 27.VPR+8 1919 C8391 1.AUDIOSELA 2.XTVMUTE 3.DIGSEL 4.XTLO 5.DIRERR 6.DIRRST CN8908 9 376315150 892498299 CN5502 C8905 QQ 3763 1515 0 89 2498 299 8 8 C8310 C8309 9 TEL 13942296513 R8317 H C8386 C8385 R8337 R8333 R8302 R8304 R8318 C8383 C QQ R8307 C8384 8 8 QQ R8306 C8313 R8308 4 16 1 C8387 C8903 11 R8313 5 C8906 16 R8311 R8312 IC8301 8 C8314 C8388 1 R8345 R8314 R8335 4 R8305 R8301 R8303 1 C8341 R8903 C8911 R8904 C8912 C8901 C8342 R8381 R8336 R8332 R8334 C8904 D8391 D8392 R8331 R8368 R8367 R8338 R8348 4 1 R8347 1 13942296513 5 R8358 R8356 R8352 R8357 R8355 R8351 R8353 B TEL R8365 IC8302 8 5 13 13 C 8 11 13942296513 U8106 R8346 C8902 IC8303 C8361 C8363 1 C8362 CE3 1 R8366 C8364 DSP TRADE ASSY 1 EN CAS REMPLACEMENT DES FUSIBLES IC5601 N'UTILISER QUE LA REFERENCE 49101.5F DE CHEZ LITTELFUSE INC. 30.FL 29.GNDA 28.FR 27.GNDA 26.SW 25.GNDA 24.C 23.GNDA 22.SL 21.GNDA 20.SR 19.VA+12 18.SBL 17.GNDA 16.SBR 15.MIXR 14.GNDA 13.MIXL 12.GNDA 11.SCRTOR 10.GNDA 9.SCRTOL 8.GNDA 7.LIN 6.GNDA 5.RIN 4.GNDA 3.SCRTIR 2.GNDA 1.SCRTIL TEL CN8302 C8257 R8902 C8910 R8261 SW E C8264 CN8905 JA8253 D A8252 +5 D E (ANP7481-B) IC8302 IC8301 www IC8303 IC8381 x iao y u163. co m IC5601 . IC8382 Q8381 Q8382 Q8383 IC1003 F C E XV-DV99 5 6 http://www.xiaoyu163.com 7 49 8 1 A 3 http://www.xiaoyu163.com 2 4 QQ 376315150 892498299 SIDE B C VIDEO ASSY DSP TRADE ASSY 1 1 CN8901 CN8907 CN8908 CN8905 CN8903 CN8905 19 1 CN8906 CN8907 CN8902 CN8906 CN8904 1 1 CN8902 CN8904 13 C8908 C8907 19 (ANP7481-B) Q5603 R8909 R8913 Q8901 R8911 R8912 D5602 D5603 R8914 Q5602 R5609 R5608 Q5601 D5604 Q8903 R8908 E Q8902 R8910 D5601 D8901 D8902 R8907 Q8901 Q5603 Q8902 Q5601 Q8903 Q5602 www F C E . Q8351 Q8352 x iao y u163. co m XV-DV99 50 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 23 1 20.DSPDI 21.DECMUTE 22.MUTE 23.MUTE_OUT QQ 1 R8341 R8339 R8343 C8335 C8340 C8333 C8337 C8331 C8307 C8305 C8312 R8309 C8303 C8301 QQ 3763 1515 0 89 2498 299 13942296513 R8369 C8332 R8361 R8363 C8355 C8311 C8308 C8306 R8310 C8304 C8302 1 8.XTLO 9.DIRERR 10.DIRRST 11.DIRCS 12.DIRDO 13.DSPMODE 14.DSPHREQ 15.BUSY 16.DSPSS 17.DSPRST 18.DSPCK 19.DSPDO 1 23 DSP TRADE ASSY AWU8101 CN8903 Q8352 Q C8381 23 1.GNDA 2.C 3.GNDA 4.SBRO 5.GNDA 6.SBLO 7.GNDA TEL C8334 C8338 R8359 R8370 R8342 R8340 C8339 R8344 C8336 R8258 R8259 C8255 C8262 C8256 C8263 R8262 R8260 L8254 C8265 C8359 L8253 Q8351 Q83 C8382 23 1 23 CE3 376315150 892498299 D 1 1 23 QQ TEL 13942296513 1.GNDD 2.LSSN 3.XTLO 4.DIRERR 5.DIRRST 6.DIRCS 7.DIRDO 8.DSPMODE 9.DSPHREQ 10.BUSY 11.DSPSS 12.DSPRST 13.DSPCK 14.DSPDO 15.DSPDI 16.DECMUTE 17.MODC 18.MUTE 19.MUTE_OUT C8360 C8357 C8351 C8352 C 1.RIN 2.GNDA 3.LIN 4.GNDA 5.FR 6.VCOMG 7.FL 8.RECMUTE 9.SR 10.GNDA 11.SL 12.GNDA 13.SW 14.GNDA 15.C 16.GNDA 17.SBRO 18.GNDA 19.SBLO C8358 C8356 C8353 13942296513 C8354 23 1 7.DIN 8.VD+5 9.VD+5 10.VA+5 R8360 11.RIN 12.GNDA 13.LIN 14.GNDA 15.FR 16.VCOMG 17.FL 18.RECMUTE 19.SR 20.GNDA 22.GNDA 21.SL 23.SW 1.DOUT 2.UGRTN 3.UGRTN 4.OPTIN 5.DGRTN 6.DGRTN 1.OPTOUT 2.UGRTN 3.OPTIN 4.DRGTN 5.OPTIN 6.GNDD 7.GNDD 8.VD+5 9.VD+5 10.NC 11.NC 12.VA+5 13.NC 1 23 TEL CN8901 CE3 CN8908 E B E CN8961 7 1 R8961 1.Y 7.NC 6.ASPECT 5.I/P 4.GNDD 3.Cr 2.Cb DTERM ASSY AWU8117 CN8951 C8963 C8962 R8963 C8961 R8964 4.GNDD FR1S P 5 R8962 376315150 892498299 1 5.NC L8951 C8951 1.Y C8952 QQ CN8961 51 XV-DV99 CN8812 (D-CONECTOR) CN8811 (COMPONENT) 13942296513 R8812 R8815 R8813 R8816 CN8951 L8952 TEL 1 R8822 R8819 R8817 R8818 R8821 C8890 C8886 C8878 C8877 C8871 R8877 C8872 R8878 R8882 C8876 C8875 R8881 R8899 R8896 R8886 C8889 C8885 R8898 R8895 R8885 3.Cr 2.Cb C8953 R8811 R8814 7 R8873 R8861 D8861 C8891 C8887 R8900 R8897 R8887 R8879 C8873 C8874 R8880 R8872 R8874 R8871 D8862 D8863 R8801 R8315 FR1S P L8953 QQ 376315150 892498299 (ANP7482-A) C D DTERM ASSY COMPONENT ASSY AWU8116 376315150 892498299 8 http://www.xiaoyu163.com R8820 R8884 D8864 R8863 C8866 R8888 B L8801 R8803 R8806 R8802 R8805 R8316 CN8302 A SIDE B C R8393 R8394 R8341 R8339 R8343 C8335 C8340 QQ TEL 13942296513 1 21 C8803 R8804 C8805 L8803 C8804 L8802 R8350 R8349 CN8301 (ANP7481-B) CN8301 Q8301 7 6 5 C8259 R8254 R8251 R8252 C8254 C8251 C8253 L8252 R8370 Q8331 13942296513 Q8332 Q8331 Q8302 Q8301 QQ 3763 1515 0 89 2498 299 CN8302 AWU8106 AWU8104 AWU8100 P COMPONENT ASSY P VIDEO ASSY Q8332 2 20 Y Cb Cr GNDD I/P ASPECT NC R8369 Q8302 F x iao y u163. co m . www L8251 R8253 R8258 R8259 C8255 C8262 C8256 C8263 R8262 R8260 L8254 L8253 C8892 TEL Q8352 Q8351 8 7 6 http://www.xiaoyu163.com 5 (ANP7482-A) Q8351 Q8352 FC ICT 4 I C8554 C8550 C8551 R8601 L8601 R8606 17 IC8603 32 C8547 C8602 R8530 CN8015 CN8016 C8604 C8603 IC8601 R8605 L8603 7 C8601 C8610 7 H C T-163 94V-0 16 C8613 C8609 1 KN8501 I R8608 C8528 C8530 109 F 17 R8332 R8333 R8336 R8346 R8337 R8810 R8805 R8556 R8557 C8511 R8514 R8513 R8512 R8511 G IC8501 5 IC8502 C8549 R8550 R8531 C8522 1 C8513 CN8018 C8512 G R8554 C8701 C8422 IC8401 IC8301 R8406 1 R8345 23 CN8007 CN8009 CN8008 CN8010 33 E C8407 C8423 R8405 CN8007 19 C8415 R8543 L8402 IC8702 Q8504 6 E CN8011 CN8012 CN8013 CN8014 IC8701 H R8506 F 11 R8335 R8329 E R8330 R8704 R8331 R8701 R8702 C8301 C8302 R8519 R8521 R8522 C8504 C8509 C8507 JTAG 144 144 C8523 C8515 Q8501 CN8011 R8803 R8804 H C8541 C8525 C8524 19 1 C8527 C8526 C8533 C8537 C8536 L8504 C8532 D8401 L8203 D IC8201 C8226 R8229 R8231 C8222 D CN8017 10 C8406 R8207 B 9 C R8110 C8107 R8107 R8102 C8218 R8226 C8108 R8103 C8113 R8111 R8109 C8112 R8705 R8707 R8706 R8708 CN8001 CN8004 CN8002 CN8005 CN8003 CN8006 C8901 CN8003 R8213 R8214 R8215 R8209 R8225 13 A X8201 R8204 25 36 36 R8203 C8209 R8210 L8201 C8210 A B 1 R8017 C8408 C C8704 E E CN8903 (ANP7022-B) XV-DV99 4 D 376315150 892498299 8 5 8 4 1 1 C8503 R8502 R8501 R8503 C8543 C8706 C8705 CN8901 QQ 17 R8802 R8524 R8552 R8553 R8539 C8545 R8533 R8534 R8339 36 1 C8505 C8418 C8420 C8546 C8703 C8702 22 CN8019 R8703 R8412 R8416 C8421 C8419 11 R8413 L8301 R8414 R8328 44 34 C8404 C8225 R8211 R8223 C8213 R8222 R8016 R8216 L8202 R8404 C8212 R8230 C8221 48 37 C8201 C8516 11 J R8411 C8202 Q8341 6 1 22 R8219 L8205 R8227 C8219 L8702 R8410 R8206 R8205 D8501 R8409 R8408 C8904 C8223 R8232 C8217 1 KN8201 JA8102 X8501 KN8102 KN8101 SIDE A 13942296513 1 J C8548 R8540 R8541 3 http://www.xiaoyu163.com TEL 20 20 http://www.xiaoyu163.com 3 15 15 2 108 23 52 22 1 x iao y u163. co m 22 1 . 498 299 QQ 3763 1515 0 89 2CN8902 12 44 D www 8 1 F IC8601 73 8 10 IC8502 11 10 E 10 9 1 IC8501 9 15 IC8701 16 11 D 72 IC8603 1 37 Q8501 11 R8551 3 99 376315150 892498299 TEL 13942296513 IC8401 20 1 Q8341 IC8301 12 QQ IC8702 Q8504 24 C8405 1 13942296513 C 13 C8105 TEL IC8201 L8204 C8215 C8214 B C8001 C8902 R8009 C8002 R8010 R8015 C8004 C8003 A 2 JA8101 JA8103 1 4 4.4 DSP ASSY D DSP ASSY QQ 376315150 892498299 SIDE A 1 2 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 SIDE B SIDE B A D DSP ASSY C8006 R8019 R8538 R8221 D8303 GND OUT R8220 R8212 Q8503 IN OUT GND IN C8008 C8216 R8334 C8010 D8502 D8402 GDAC 1 Q8503 R8558 4 IC8503 5 R8340 19 R8341 D8301 D8302 R8343 R8344 R8321 R8320 R8544 R8542 R8536 R8546 R8545 L8501 R8322 R8308 C R8504 R8555 R8507 R8508 R8509 R8510 C8544 R8518 R8517 R8516 R8515 C8542 V11 C8540 GNDD C8514 R8528 R8312 R8313 R8314 R8326 R8529 C8539 C8538 C8529 17 E AWX8251 AWX8252 AWX AWX8241 IC8602 1 C8014 C8013 C8608 C8607 1 32 AWX8240 F AWX8253 AWX8254 AWX8255 AWX8239 7 x iao y u163. co m C8606 C8605 (ANP7022-B) D XV-DV99 5 6 D AWX1082 AWX1083 C8531 R8602 R8537 L8502 AWX8250 19 R8603 L8602 6 C8534 C8535 R8801 R8812 R8811 R8813 R8523 R8309 C8520 R8310 C8521 R8311 C8518 V3 17 PRODUCTION CODE CN8011 R8526 C8517 R8527 R8520 R8505 16 1 L8701 R8809 L8801 D 376315150 892498299 1 GNDD 15 C8007 R8547 R8548 R8549 IC8503 8 C8401 C8009 C8417 C8501 C8502 R8532 R8018 R8338 C 376315150 892498299 QQ 3763 1515 0 89 2498 299 C8402 C8403 R8415 R8417 R8806 R8807 C QQ D8503 L8505 C8553 C8552 GNDD QQ CN8007 IC8902 R8113 C8211 C8555 R8808 . R8115 R8114 C8205 C8206 C8207 13942296513 13 15 C8903 R8006 L8401 TEL 8 8 7 B 9 13942296513 R8234 C8224 R8407 www C8011 R8224 C8204 R8202 IC8101 IC8901 C8012 C8208 C8203 R8233 R8201 R8401 R8402 R8403 C8409 C8410 C8411 C8412 C8413 C8414 C8416 R8104 R8105 R8116 IC8101 GNDD IC8902 TEL 13942296513 B C8220 R8228 L8004 R8004 L8003 R8003 L8104 R8112 L8103 14 IC8901 14 C8005 R8011 C8115 C8110 C8109 L8002 R8002 R8001 L8001 L8102 C8114 1 A 1 TEL CN8003 C8111 R8108 A R8014 R8013 R8012 GCH R8007 R8008 B R8005 L8005 C8106 R8106 L8101 C8104 http://www.xiaoyu163.com 7 53 8 1 2 3 http://www.xiaoyu163.com 4 4.5 FM/AM TUNER MODULE A QQ 376315150 892498299 SIDE A SIDE A F FM/AM TUNER MODULE B TEL TEL 13942296513 13942296513 C SIDE B F (ANP7338-B) Q202 SIDE B FM/AM TUNER MODULE CN201 D E F F www . x iao y u163. co m (ANP7338-B) Q201 IC201 Q203 IC202 Q205 Q204 XV-DV99 54 1 2 3 http://www.xiaoyu163.com 4 F 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 CN201 QQ QQ G CN5702 6 http://www.xiaoyu163.com 5 7 8 4.6 KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS QQ 376315150 892498299 SIDE A SIDE A N KEY L ASSY (ANP7482-A) A M KEY R ASSY KEYL ASSY AWU8110 STBY 1/2 KEYR ASSY AWU8112 1/2 D1901 OPEN/CLOSE (ANP7482-A) W107 J1903 KEY1 FR1S P FR1S P S1904 S1901 6 J1991 6 1 1 1 J1902 1 7 GNDD W108 1 3 W106 KEY1 7 1 5 7 1 7 E S1906 CN1902 FR1S P VOL + VOL - CN5601 J1901 KEYRTOP ASSY AWU8113 KEYLTOP ASSY AWU8111 H F S1902 S1903 S1905 Production Code 1/2 (ANP7482-A) (ANP7482-A) KEY RTOP ASSY L KEY RTOP ASSY 99 B QQ 3763 1515 0 89 2498 2SIDE TELSIDE13942296513 B O KEY LTOP ASSY VOL + 2.GNDU 1.KEY1 5.TMRLED 4.GNDLED 3.VE+5 1.NC 3.GNDU 2.KEY1 4.KEY1 5.VE+5 7.GNDLED 6.TMRLED 1.KEY1 2.GNDD 3.KEY1 FR1S P 1 1 KEYRTOP ASSY AWU8113 R1904 R1905 R1903 R1902 VOL 3 FR1S P 1 AWU8111 5 KEYLTOP ASSY 7 (ANP7482-A) 376315150 892498299 D (ANP7482-A) CN1908 CN1903 2.KEY1 1.NC 4.KEY1 3.GNDU 6.TMRLED 5.VE+5 7.GNDLED OPEN/CLOSE 4.VE+5 5.TMRLED 6.GNDLED 3.KEY1 2.GNDU 1.KEY1 1 KEY1 R1901 x ao y u163 . co m M KEYL ASSY AWU8110 (ANP7482-A) FR1S P STBY E CN1904 7 1.KEY1 2.GNDU 3.KEY1 4.VE+5 5.TMRLED 6.GNDLED R1909 R1907 1 1 KEYR ASSY AWU8112 Q1904 3.KEY1 2.GNDU 1.KEY1 3 6 A GNDD KEY1 www FR1S P (ANP7482-A) CN1905 1 R1911 CN1906 B CN1907 CN1902 6 376315150 892498299 L C QQ QQ O KEY LTOP ASSY 13942296513 13942296513 FR1S P 3 J1993 5 6 1 1/2 CN1902 TEL TEL CN1903 CN1908 1 B CN1904 1 CN1905 1 1 CN1906 6 1 CN1907 1 J1992 . L ASSY i N KEY L M N O F KEY R ASSY L M N O XV-DV99 5 6 http://www.xiaoyu163.com 7 55 8 R3931 R3929 R3927 R3928 R3930 R3932 1 1 R3925 R3923 R3921 L3906 R3922 R3924 R3926 R3919 R3917 R3915 R3916 R3918 R3920 C3912 HP L GNDHP HP R VA-12 VA+12 HPDATA HPCLK HPCE VE+56 GNDD XHPMUTE HPDET NC KN3901 C5705 C8025 NP R8609 C8613 13 13 Q8601 AWU8148 AWU8099 AWU8107 CN8401 NP 1 1 C5707 1 C3911 CN3901 R8611 C8615 C8060 1 4 IC8003 C8056 R8026 C8024 8 AWU8150 CONTROL ASSY AWU8103 AWU8108 AWU8149 W104 GNDX R8657 VX+10 11 16 C8661 11 16 R8025 C8023 Q8006 Q8005 13 13 11 R8214 19 AWU8105 AWU8109 8 8 9 8 8 9 8 8 9 IC8002 16 IC8201 W103 1 IC8602 RDSDATA IC8652 R8659 R8660 6 C8068 C8067 W105 C8657 C8614 R8612 R8610 C8616 VD+5 10 JA8201 CN1701 R3905 R3906 C1701 Q8012 5 IC8601 R8018 W102 20 1 C5711 C8658 IC8651 JA8002 C8021 C8061 D8002 AWU8153 AWU8158 C8022 1 R8658 R8666 1 C8662 CN5605 C8522 Q8011 5 R3909 6 1 C3909 C3907 5 4 C3908 R3910 RDS 10 376315150 892498299 C5706 QQ D3902 IC3902 R3911 8 1 R3912 C3910 W101 R8654 C8654 R8652 C8659 R3955 R3956 R3902 R3904 R3903 R3901 10 19 IC8001 19 19 C3935 13942296513 C8656 R8656 C8660 R8651 C5702 C8514 5 4 C8653 R8653 C8651 C8652 30.FL GNDA FR GNDA SW 25.GNDA C GNDA SL GNDA 20.SR VA+12 SBL GNDA SBR 15.MIXR GNDA MIXL GNDA SCRTOR 10.GNDA SCRTOL GNDA LIN GNDA 5.RIN GNDA SCRTIR GNDA 1.SCRTIL R8601 R8605 R8604 R8603 D8601 R8602 CN8401 TEL R8518 8 1 R8655 C8655 C8602 C8605 C8607 C8606 R8607 C5701 8014 8009 C8618 C8617 R8213 R8615 R8616 C8619 CN5605 8006 8009 D8004 R8665 C8034 C8033 C8601 9 R8212 CN5701 IC8601 D8005 Q8010 R8063 C8032 C8031 C8603 16 8 8 R8058 R8059 1 1 376315150 892498299 3 C8604 R8608 11 C8214 C8620 R8051 C8058 C8062 QQ 4 http://www.xiaoyu163.com 30 30 C8026 5 C D8001 C8057 13942296513 XV-DV99 56 R8020 R8052 R8053 R8019 R8055 R8057 C8053 C8052 TEL G H I 2 1 Q8005 Q8006 IC8003 IC8602 Q8601 IC8201 IC8002 IC8001 (ANP7481- CN1701 (ANP7482-A) Q8010 IC8651 Q8009 Q8014 IC8652 Q8012 Q801 x iao y u163. co m . C3916 C3904 C3903 R3907 R3908 C3918 L3902 C3914 1/2 JA3901 D C3913 FR1S P C3915 L3901 C3902 C3942 IC3901 C3906 C3905 C3917 10 E R3913 C3930 C3901 C3933 C3940 HP ASSY AWU8102 CE3 R3914 TXTRADE ASSY AWU8114 AWU8115 AWU8152 KN5701 CN5702 C CN3901 Q3910 IC3901 IC3902 www F CN5702 X5701 4 Q3910 F CN201 D 1 I TEL 13942296513 5 HP ASSY 0 89 2498 299 QQ 3763 15C15CN8302 G TXTRADE ASSY 8 B 11 C DC FC CN5701 QQ 376315150 892498299 H CONTROL ASSY SIDE A A 4 3 http://www.xiaoyu163.com 2 1 4.7 TXTRADE, CONTROL and HP ASSYS A D8003 C8211 JA8001 R8017 http://www.xiaoyu163.com 6 7 IC8506 Q5201 IC1001 IC8502 IC8402 IC8401 IC5501 x iao y u163. co m IC8505 IC8501 8 57 H I IC1004 CN3902 F (ANP7481-B) CN5604 11 1 1 13 CN3902 VE+56 CN5601 13 R5506 R5515 R5507 UTEST X5501 TEST E+5 30 30 IC5501 C5603 C5604 1 1 1 CN55017 31 31 50 50 14 B 15.DSPDI DSPDO DSPCK DSPRST DSPSS 10.DSPHREQ DSPMODE DIRDO DIRCS C8401 8 C8402 1 7 R8504 C8504 R8524 C8528 GNDM VPR+8 7 CE3 30.VA-12 XPROTECT R5585 R5573 R5571 R5572 R5566 R5556 DIRRST 5.DIRERR XTLO DIGSEL XTVMUTE 1.AUDIOSELA C8403 C8411 R8421 C8409 IC8402 VPR+8 IC8401 C8410 IC8501 IC1001 IC1004 GND OUT IN IC8502 R8508 C8532 UN+56 IC8506 C8530 GNDD For service point short GNDA Q8402 Q8403 R8405 R8401 R8402 R8425 Q8401 Q8406 R8407 IC8505 C8533 D8517 D8519 R8404 R8409 R8513 C8515 IC8503 GNDM C8529 C8535 D8523 Q8404 IC8652 R8659 R8660 Q8407 Q8405 C8520 IC8504 D8512 C8521 D8509 D8515 D8511 D8513 C8524 D8514 D8516 C8658 R8658 C8522 Q8011 C8518 IC8651 C 11 R5205 Q8012 D8510 CN8501 8 8 20 CN5602 Q8014 Q8009 C8662 20 CN5201 1 9 1 16 C8534 D8518 R5206 For service short point D8521 VPR+12 D5206 C8517 C8531 C8536 D8524 D8522 D8520 C5203 C5575 D5205 D5202 D5201 D5203 CN5603 1 D8006 D8009 7 1 C5578 CN5502 QQ 13942296513 TEL B L5571 C5204 D C C5572 C5576 C5206 L5202 Q5201 L5203 R5201 123.0mm Knife Line D1006 C1010 C1001 C1007 C1002 D1001 5 D1002 R5204 8 4 R8526 R5202 VA-12 R5575 R5574 80 51 0MUTE MUTEOUT DSPMUTE DECMUTE R5570 PRODUCTION CODE C5606 C8539 5 C8541 8 4 R8502 R8510 R8506 1 1 R8528 C5607 R8422 C8412 C8538 R8522 CN8908 R5530 R5529 VD+5 R5584 VPR+8 R5583 R5582 VPR+8 25.GNDRTN R5581 GNDRTN R5580 R5579 OPTIN GNDU R5578 GNDU R5577 20.DVDMUTE R5576 R5531 R5532 R5541 R5540 R5533 R5534 R5535 R5536 R5537 R5538 R5539 R5599 R5542 4 L5201 C 376315150 892498299 CN5601 E L 123.0mm Knife Line C5510 R5526 R5544 R5546 R5548 R5550 R5552 R5553 R5545 R5551 1 Q5202 CN5501 A CN1902 C5507 R5547 R5549 R5558 R5560 R5564 R5565 R5562 R5554 R5555 R5557 R5559 R5561 R5563 C8537 C8404 C8502 5 8 C8526 5 8 KN1001 1.CTS R5525 R5524 R5523 R5522 R5521 RTS RXD TXD 5.XVMUTE DVDMUTE ZERO VDET GNDD 10.GNDD R5520 R5519 R5518 R5517 R5516 MDATA SDATA SCLK ACK C5605 51 5 L5204 L5205 D8004 5 5 R5528 100 100 81 81 R5568 R5569 R8509 R8505 R8501 C8503 R8503 4 4 C8527 R8523 R8521 1 R8507 C8501 1 R8525 5 R8515 8 R8519 C8523 C8519 R8529 R8511 R8527 C8525 R8408 4 R8514 C8513 1 5 R8516 8 4 1 R8517 C8514 L5601 R5607 15.SYSCS2 SYSCS1 XDVDRST DVDPOW GNDD 20.GNDD DOUT GNDD GNDD GNDM 25.GNDM VPR+8M VPR+8M VPR+8 VPR+8 30.VDVD+12 C5508 11 D8005 Q8010 R8063 R8403 R8406 R8426 R8427 R8428 C8656 R8656 R8518 C8516 5 R8512 8 4 1 1 30 30 1 80 QQ 3763 1515 0 89 2498 299 8 R8530 C3932 D3902 30 30 6 10 R8520 C8660 R8654 C8654 R8652 C8659 1 R5505 R5504 R5502 R5501 C3904 C3942 CN5502 5 R3909 1 C3909 R3955 R3956 R3902 QQ 376315150 892498299 . C3935 C3903 TEL 13942296513 5 XV-DV99 IC8503 Q8010 IC8651 Q8009 Q8014 IC8504 IC8652 Q8012 Q8011 Q8404 Q8405 Q8406 Q8407 Q8402 Q8403 Q8401 www CN901 CN5604 B Q3910 IC3901 (ANP7481-B) 8 C3905 IC3901 C3902 C3930 Q3910 HP ASSY AWU8102 HP ASSY TEL 13942296513 7 D8003 A B CN8501 CN5602 CN5201 CN5603 QQ 376315150 892498299 K CN5101 To SUB WOOFER A SIDE A 6 http://www.xiaoyu163.com 5 7 8 4 R5508 CN5501 1.WEN/DI WD0 WCLK RST 5.VCC VSS NC R5512 R5510 C5516 R5594 C5503 C5501 C5502 R5586 R5595 R5509 R5597 C5506 R5598 C5515 R5503 NC HPDET XHPMUTE GNDD VE+56 HPCE HPCLK C5513 CN5502 C5514 R5567 C8408 R8419 C5580 R8411 R8413 R8417 C5518 C5517 C5504 R8424 R8423 R8415 R8416 R8420 C5511 R8531 R8532 R8412 R8414 R8418 C8506 R5513 R5511 C8508 R5527 R5514 R5596 C5509 D8508 D8506 C8512 C8507 1 13 C5602 C5601 1.HPL GNDHP HPR VA-12 5.VA+12 HPDATA HPCLK HPCE VE+56 10.GNDD XHPMUTE HPDET 13.NC Q3911 C1008 C1009 D8502 D8504 R5587 C5571 R5588 C5579 C5201 CN8501 1.SWN FLN FLP FRP 5.SWP FRN CP SRN SRP 10.SLN CN SLP R8061 R8062 D5608 D5609 CN5602 D5606 1.GNDA VPR+8 D5605 VPR+8 VPR+12 5.GNDM VPR+8 R5601 GND R5602 UNE+56 R5606 GND 10.VA-12 R5605 VOLDATA R5604 VOLCLK R5603 GNDM GNDM 15.VOLCS GNDM XSYMUTE SUBAC XPROTECT D5607 20.SYSPOW D5610 CN5201 1.VPR+12LED GNDLED IR XDIMMER 5.GNDD LCDDAT XLCDCS LCDCLK VE+56 10.GNDD 1.TXD RXD RTS DVD CTS 5.VD+5 GNDD NC CN5603 C5573 D5575 Q5571 Q5501 D5572 R5203 5.KEY GNDU VE+5 GNDLED 1.TIMERLED 1 7 C5505 CE3 C8505 C8509 D8503 D8501 R5592 Q5572 R8032 R8031 4 1 C5202 Q8008 033 R8034 07 C5574 5 8 7 6 10 20 8 9 C8511 D8505 D8507 R5589 R5590 11 C5577 9 7 L5207 12 R5591 R5593 5 1 3 2 6 3 10 http://www.xiaoyu163.com R8036 C8072 R8038 L8012 XV-DV99 HP AS HP ASSY AWU8102 CE3 Q3911 Q8008 Q80 376315150 892498299 2 QQ 3763 1515 0 89 2498 299 QQ Q5501 R3961 R3962 x iao y u163. co m CN5604 R3953 R3952 58 R3963 R3958 R3957 Q5571 D3901 1 . I C3943 H I CN3902 C3931 www 1 C3944 C3945 F 5 1 376315150 892498299 TEL 13942296513 CN5602 2 C C8510 C8407 13942296513 QQ CN5601 QQ 376315150 892498299 CN5201 4 3 CN5603 TEL 13942296513 E 1 TEL D 7 B L8501 SIDE B 3 http://www.xiaoyu163.com C8540 A 2 R8060 L8011 1 4 H CONTROL ASSY CN8501 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 L8202 R8211 R8002 L8003 R8010 L8009 R8006 L8006 R8012 L8004 R8005 R8007 R8042 R8024 R8044 Q8003 R8028 AWU8148 AWU8107 AWU8158 AWU8153 AWU8150 AWU8108 AWU8149 AWU8109 AWU8105 CONTROL ASSY AWU8103 AWU8099 C5716 VA+12 HPL HPR F R5711 1 5.VX+12 6.GNDD 7.VD+5 1 GNDD 9 8.RDSCLK IC5701 R5714 VX+10 R5705 D5701 R5704 R5703 CN5701 VE+56 13 NC HPDET XHPMUTE GNDD VE+56 HPCE HPCLK HPDATA VA+12 VA-12 HP R GNDHP HP L R5707 R5713 R5708 C5710 C5709 R5712 C5708 GNDX R5706 R5702 9.RDSDAT 10.RDSPOW 11 8 11.TXCE 12.TXODAT 13.TXCLK 14.TXIDAT 15.TXMUTE 16.ST/TUNE 17.GNDF 18.VP+12 19.DVD ON/OFF D RDS D1701 D1702 D1703 D1704 C5713 C5712 Q1702 R1703 E R1701 GNDHP VA-12 13 Q3903 1 C5704 C5703 Q3905 C3936 L3905 R1702 D1705 C5714 Q1701 R1704 R5715 VD+5 C3937 R3959 Q3911 Q8007 16 16 1.NC 2.TXL 3.GNDX 4.TXR C3938 R3967 R3966 Q8008 8.TXMUTE R3960 Q3906 R3965 Q3902 R3963 R3958 R3957 R3961 R3962 Q3901 D3901 FR1S P (ANP7481-B) www R5701 13.NC 12.RDS 11.VX+10 10.TUNE 9.STEREO 7.TXL 6.GNDX 5.TXR 4.TXIDAT 3.TXCLK 2.TXODAT 1.TXCE C3939 R3964 C3941 C3934 R3950 C3943 R3951 C3931 R3954 R3953 R3952 Q3904 R3968 R3969 AWU8114 AWU8115 AWU8152 AWU8159 RDSDATA CN5702 TXTRADE ASSY Q3901 Q3902 376315150 892498299 IC5702 CE3 C3944 C3945 376315150 892498299 QQ 3763 1515 0 89 2498 299 CN3901 1 CN5605 R8054 R8056 C8055 C8059 R8021 R8022 R8023 Q8008 R8033 R8034 Q8007 R8030 Q8004 R1001 L8010 R8003 R8008 R8043 Q8002 Q8001 QQ 1.DVDON/OFF VP+12 GNDF ST/TUNE R8035 C8069 R8037 R8004 R8029 R8027 R8041 C8007 C8008 C8005 C8006 R8202 R8201 C8202 R8204 C8201 L8203 C8608 5.TXMUTE TXIDATA TXCLK TXODATA TXCE 10.RDSPOW RDSDATA RDSCLK VD+5 GNDD 15.VX+12 TXR C8003 C8001 L8201 R8203 R8613 L850 R8061 GNDX TXL 19.GNDX C8004 C8002 C8540 CN SLP C8011 C8009 G TXTRADE ASSY C 19 R8060 L8011 C8071 C8070 R8614 C8012 C8010 13942296513 QQ HP ASSY AWU8102 TEL 1 13942296513 HP ASSY Q3911 R8009 R8011 L8007 C8212 C8213 C8611 C8609 C8610 C8066 R8015 L8008 R8013 L8002 C8051 R8032 R8031 R8001 L8001 C8065 R8062 C8064 19 TEL I B (ANP7481-B) CN8401 TEL 13942296513 A C8063 C8054 L8005 R8014 SIDE B (ANP7482-A) CN1701 x iao y u163. co m Q3904 Q3905 Q3903 Q3906 Q3905 . F Q8001 Q8002 Q8004 Q8003 G H I XV-DV99 5 6 http://www.xiaoyu163.com 7 59 8 1 3 http://www.xiaoyu163.com 2 4 4.8 LCDCONT and CONNECT ASSYS QQ 376315150 892498299 SIDE A SIDE A FR1S P 1/4 White LED direction D5002 LCDCONT ASSY D5001 W111 VPR+12 D5003 B J J5092 FR1S P VE+5 W108 AWU8118- 1/4 CONNECT ASSY GNDD H CN5201 CN5101 W101 CN5101 GNDD W102 1 CN5102 1 CN5102 CN5001 99 99 1 1 GNDD W105 CN5001 VE+5 W104 W107 VPR+12 W103 GNDLED IR W106 GNDD 8 8 D (ANP7483-A) X5051 1 PC LCDCONT ASSY x iao y u163. co m C5051 J K . C5052 www F AWU8119- E (ANP7483-A) XV-DV99 60 1 2 3 http://www.xiaoyu163.com 4 J K 376315150 892498299 W109 1 1 376315150 892498299 QQ 3763 1515 0 89 2498 299 QQ QQ TEL 13942296513 1 W110 GNDLED ASSY 13942296513 13942296513 C TEL TEL K CONNECT C5002 A 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 SIDE B SIDE B LCDCONT ASSY B D5001 D5002 J A D5003 C5018 TEL D5005 D5006 R5011 13942296513 1.VPR+12 2.GNDLED 3.IR 4.XDIMMER 5.LCDCLK 6.XLCDCS 7.LCDDAT 8.GNDD 9.VE+5 CN5001 GNDLED VPR+12 1 GNDD 1 CN5102 9 9 9.VPR+12 8.GNDLED 7.IR 6.XDIMMER 5.LCDCLK Q5001 VE+5 13942296513 C5102 D5102 R5009 D5004 GNDLED TEL K CONNECT ASSY B VPR+12 Q5001 4.XLCDCS 1 L5001 R5013 C5001 C5004 8 9.VE+56 FR1S P (ANP7483-A) D5013 C5014 D5011 C5012 D5012 C5013 6.LCD DAT 5.GNDD D5007 8.LCD CLK 7.XLCD CS CN5101 10.GNDD R5008 D5010 R5006 D5009 R5007 D5008 VE+5 4.XDIMMER 3.IR 2.GNDLED 1.VPR+12 R5001 R5105 D5104 LCDCONT ASSY AWU8119- GNDD R5103 D5109 376315150 892498299 R5101 D5107 C QQ TEL 13942296513 AWU8118- D E R5053 x iao y u163. co m 2.VE+5 A 1.VOUT R5052 . J K F R5051 www 3.GNDD 376315150 892498299 QQ 3763 1515 0 89 2498 299 GNDD D5103 C5101 D5101 CONNECT ASSY R5104 D5105 IR D5108 FR1S P QQ 8.NC 7.LCDDAT 6.LCDCLK 5.XLCDCS 4.VREF 3.GNDD 2.VE+5 1.NC 3.LCDDAT 2.GNDD 1.VE+5 (ANP7483-A) J K XV-DV99 5 6 http://www.xiaoyu163.com 7 61 8 1 2 3 http://www.xiaoyu163.com 4 5. PCB PARTS LIST A QQ 376315150 892498299 B • LIST OF WHOLE PCB ASSEMBLIES NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. When ordering resistors, first convert resistance values into code form as shown in the following examples. Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%). 560 Ω 56 x 10 1 RD1/4PU 5 6 1 J 561 47k Ω RD1/4PU 4 7 3 J 47 x 10 3 473 0.5 Ω RN2H R 5 0 K R50 1Ω RS1P 1 R 0 K 1R0 Ex.2 When there are 3 effective digits (such as in high precision metal film resistors). 5.62k Ω 562 x 10 1 5621 RN1/4PC 5 6 2 1 F Mark Symbol and Description XV-DV990/ ZYXJ XV-DV990/ ZVXJ AXA7126 VWT1208 VWG2346 AWM7813 AXA7126 VWT1208 VWG2346 AWM7813 NSP 1..DVD COMP ASSY 2..VIDEO ASSY 2..DSPTRADE ASSY 2..CONTROL ASSY 2..HP ASSY AWM7844 AWU8100 AWU8101 AWU8099 AWU8102 AWM7844 AWU8100 AWU8101 AWU8099 AWU8102 AWM7866 AWU8100 AWU8101 AWU8148 AWU8102 AWM7866 AWU8100 AWU8101 AWU8148 AWU8102 1..DSP ASSY AWX8325 AWX8325 AWX8325 AWX8325 1..FM/AM TUNER MODULE AXQ7229 AXQ7229 AXQ7229 AXQ7229 1..DISPLAY UNIT 2..DISPLAY ASSY 3..LCDCONT ASSY 3..CONNECT ASSY AXX7163 AWM7853 AWU8119 AWU8118 AXX7163 AWM7853 AWU8119 AWU8118 AXX7163 AWM7853 AWU8119 AWU8118 AXX7163 AWM7853 AWU8119 AWU8118 1..DVD SUB ASSY 2..TXTRADE ASSY 2..KEY R TOP ASSY 2..KEY R ASSY 2..KEY L ASSY 2..KEY L TOP ASSY AWM7850 AWU8114 AWU8113 AWU8112 AWU8110 AWU8111 AWM7850 AWU8114 AWU8113 AWU8112 AWU8110 AWU8111 AWM7850 AWU8114 AWU8113 AWU8112 AWU8110 AWU8111 AWM7850 AWU8114 AWU8113 AWU8112 AWU8110 AWU8111 QQ 376315150 892498299 NSP TEL 13942296513 NSP D QQ 3763 1515 0 89 2498 299 H CONTROL ASSY AWU8099 and AWU8148 are constructed the same except for the following : Mark Symbol and Description R5510 R5511 Mark No. AWU8099 AWU8148 Not used RS1/16S333J RS1/16S473J RS1/16S123J Description Mark No. Part No. SEMICONDUCTORS SWITCHES AND RELAYS S101 VSK1011 www Part No. B DVDM ASSY A LOAB ASSY OTHERS CN602 KR CONNECTOR CN601 KR CONNECTOR PC BOARD LOAB F Description . IC741, IC761, IC781 IC861, IC871 IC851 IC602 IC802 BA4558F-HT DSD1702EG DSD1791DBR K4S281632D-TC75 K4S641632F-TC75 IC101 M63018FP MM1565AF MM1623AF PQ018EH01ZP PQ018EZ01ZP x iao y u163. co m S2B-PH-K S5B-PH-K VNP1836 > IC431 IC501 > IC421 > IC411 XV-DV99 62 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 AXA7126 VWT1208 VWG2346 AWM7813 QQ AXA7126 VWT1208 VWG2346 AWM7813 13942296513 13942296513 1..DVD ASSY 2..Loading Mech. ASSY 3..LOAB ASSY 2..DVDM ASSY TEL TEL XV-DV99/ ZVXJ NSP NSP NSP C E XV-DV99/ ZYXJ 6 http://www.xiaoyu163.com 5 Mark No. Description Part No. 7 Mark No. 8 Description Part No. QQ 376315150 892498299 > IC441 > IC401 IC801 IC601 IC301 PQ20WZ11 R1224N102H SAA7893HL/C2 STI5588CVB STM6316ATXXA IC911 IC901 IC807 IC691 IC803 TC74VHC08FT TC74VHCT125AFT TC7SET08FU TC7SU04FU TC7WH34FU Q951 Q722, Q746, Q763, Q977 Q922, Q925 Q201, Q211 Q911 DTC114TUA DTC114YUA DTC124EUA HN1A01F RN1903 Q603 D431, D432 D402, D403, D743, D761, D782 D922-D927 D401 RN4982 1SR154-400 1SS355 1SS355 RB051L-40 D603 D921 D741, D742, D781 RB501V-40 UDZS4.7B UDZS6.2B TEL 13942296513 COILS AND FILTERS L401 POWER INDUCTOR L402 POWER INDUCTOR L413, L414 CHIP BEADS L390 L1056-L1061 CHIP BEADS ATH7011 CTH1254 ATL7010 LCYA2R7J2520 VTL1078 CAPACITORS C408, C747, C748, C751, C752 C390 C142 C765, C766, C785, C786 C200, C763, C764, C783, C784 CCSRCH121J50 CCSRCH180J50 CCSRCH221J50 CCSRCH270J50 CCSRCH331J50 C690 C755, C756, C773, C774 C793, C794 C392 C393, C640, C644 CCSRCH470J50 CCSRCH471J50 CCSRCH471J50 CCSRCH560J50 CCSRCH7R0D50 C452, C753, C754, C771, C772 C791, C792 C101, C401, C404, C410, C412 C422, C443, C561, C564, C600 C750, C797-C799, C809, C851 CEVW100M16 CEVW100M16 CEVW101M16 CEVW101M16 CEVW101M16 . CEVW101M16 CEVW101M16 CEVW101M4 CEVW101M4 CEVW470M16 www C309, C315, C318, C323, C326 C335, C342, C348, C357, C362 C373, C377, C388, C391 C413, C414, C423, C424 C441, C442, C451, C511, C531 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 C551, C565, C571, C604, C607 C614, C619, C622, C623 C626-C632, C636, C637, C641 C647-C649, C659, C664, C671 C681, C684, C691, C694, C698 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 C741, C742, C749, C767-C769 C787-C789, C801, C803, C804 C806-C808, C811, C813-C826 C829, C852, C855, C856 C858, C859, C862, C865, C866 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 C872, C875, C876, C902, C912 C921 C230, C232, C233, C501, C521 C541, C603, C620, C625 C757, C758, C795 CKSRYB104K16 CKSRYB104K16 CKSRYB105K10 CKSRYB105K10 CKSRYB105K10 C394, C743-C746 C126, C346 C202, C205, C212, C215 C402, C403, C405, C409 (10µF/16V) CKSRYB152K50 CKSRYB223K50 CKSRYB472K50 DCH1165 QQ 3763 1515 0 89 2498 299 RESISTORS R824, R825, R836-R838 R201 R211 R100, R1011-R1013, R1069, R111 R210, R387-R389, R412, R415 RAB4C0R0J RAB4C220J RAB4C390J RS1/10S0R0J RS1/10S0R0J R417, R421, R422, R483, R485 R561, R600, R623, R840, R884 R403 R105, R106, R115-R120 R104, R107 RS1/10S0R0J RS1/10S0R0J RS1/10S100J RS1/10S4R7J RS1/10S6R8J R125, R144, R330, R331, R628 R635, R761-R764, R781-R784 R301 R502, R512, R522, R532, R542 R552 RS1/16S1002F RS1/16S1002F RS1/16S1202F RS1/16S1500F RS1/16S1500F R408 R410 R443 R741-R746, R751, R752 R409 RS1/16S1502F RS1/16S1802F RS1/16S2001F RS1/16S2201F RS1/16S2702F R441 R101, R102, R123, R142, R143 R442 R411 RS1/16S4701F RS1/16S5600F RS1/16S6801F RS1/8S0R0J XV-DV99 5 6 C D E x iao y u163. co m C853, C854, C861, C863, C864 C871, C873, C874 C415, C425, C621, C660, C812 C857 C201, C211 B 376315150 892498299 376315150 892498299 2SC4081 2SD2114K 2SD2114K CPH6314 DTA124EUA CKSRYB102K50 CKSRYB102K50 CKSRYB103K50 CKSRYB103K50 CKSRYB104K16 QQ QQ Q202, Q212, Q452 Q741, Q742, Q761, Q762 Q781, Q782 > Q401 921 C127, C128, C381, C562, C563 C624, C802, C810 C112-C114, C124, C125, C130 C133, C134, C355, C805 C102, C132, C139, C300, C307 A 13942296513 13942296513 TC7WU04FU VYW2087 2SA1576A 2SA1576A 2SA1576A CEVW470M6R3 CEVW470M6R3 CKSQYB104K25 CKSQYB105K16 CKSQYB225K10 TEL TEL IC604, IC804 IC603 Q390 > Q451 Q744, Q764, Q923, Q924, Q926 C761, C762, C781, C782, C867 C877 C406 C431 C433 http://www.xiaoyu163.com 7 F 63 8 1 Mark No. 2 Description 3 http://www.xiaoyu163.com Part No. Mark No. RS1/16S###J OTHERS OTHERS CN104 4P CONNECTOR CN105 12P FFC CONNECTOR CN103 CONNECTOR FLEXIBLE CABLE CN901, CN943 30P FFC CONNECTOR AKN7035 RKN1053 S5B-PH-SM3 VDA1681 VKN1322 CN8802 4P MINI DIN SOCKET CN8906, CN8907 23P PLUG JA8251 OPT LINK IN PCB BINDER JA8801 1P PIN JACK CN101 0.5-24P CONNECTOR X601 (27MHz) X301 (20MHz) VKN1482 VSS1172 VSS1186 JA8871 RGB CONNECTOR VKB1157 CN8302, CN8908 30P FFC CONNECTOR VKN1322 CN8301 30P FFC CONNECTOR VKN1434 C VIDEO ASSY B SEMICONDUCTORS AK4114VQ AK4628VQ DSPD56367PV150 NJM2391DL1-33 NJU7223DL1-18 IC8862 Q8832, Q8842, Q8901, Q8902 Q8831, Q8841 Q8301, Q8302, Q8331, Q8332 Q8351, Q8352, Q8871, Q8872 MM1507XN 2SA1576A 2SC4081 2SD2114K 2SD2114K IC8701 IC8702 IC8502 Q8504 Q8503 TC74LVX244FT TC74VHCT244AFT TC7WU04FU UMD2N UN5112 Q5601, Q8321, Q8382, Q8383, Q8873 Q5602, Q5603, Q8381, Q8903 D1004 D5601-D5604, D8382, D8383, D8841 D8861-D8864, D8871, D8901, D8902 UN5112 UN5212 1SR154-400 1SS355 1SS355 D8501 D8401 D8402, D8502, D8503 1SS355 DAN202K DAP202K COILS AND FILTERS COILS AND FILTERS L8252 CHIP BEADS CAPACITORS VTL1076 CAPACITORS E C8877, C8878 C8875, C8876 C8871, C8872 C8803-C8805, C8889-C8892 C8307, C8308 CCSRCH101J50 CCSRCH221J50 CCSRCH391J50 CCSRCH470J50 CCSRCH680J50 C8303, C8304 C8337, C8338, C8357 C8313-C8316, C8341-C8344 C8361-C8364, C8862 C8252, C8881-C8883 CCSRCH681J50 CCSRCH821J50 CEAT100M50 CEAT100M50 CEAT101M16 C8801, C8802, C8884 C8863, C8868 C8383-C8388, C8391, C8392 C8901-C8906 C1004, C1006, C8309, C8310 CEAT102M6R3 CEAT470M16 CEJQ100M16 CEJQ100M16 CEJQ470M16 C8311, C8312, C8339, C8340 C8359, C8360, C8381, C8382 C1003, C1005, C8251, C8253, C8831 C8842, C8843, C8861, C8864-C8867 C8331-C8334, C8351, C8353 CKSRYB103K50 CKSRYB103K50 CKSRYB104K25 CKSRYB104K25 CKSRYB152K50 C8354 C8358 CKSRYB224K10 CKSRYB562K50 www RESISTORS . R8834 R8801-R8803, R8885-R8888 Other Resistors ATL7002 QTL1013 QTL1013 C8209, C8210 C8421 C8007, C8008, C8201, C8212, C8214 C8404, C8409-C8414, C8416, C8417 C8419, C8505, C8507, C8509 CCSRCH100D50 CCSRCH101J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 C8511, C8512, C8515, C8518, C8520 C8522, C8524, C8526, C8528, C8530 C8532, C8534, C8536, C8539, C8541 C8543, C8545, C8551, C8703, C8706 C8548, C8549 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH8R0D50 C8701, C8704 C8406, C8415, C8546, C8547, C8902 C8904 C8217, C8225, C8408 C8204, C8555 CEV100M16 CEV101M16 CEV101M16 CEV470M6R3 CKSRYB102K50 C8009, C8405, C8418, C8517, C8554 C8003, C8005, C8010, C8202, C8207 C8213, C8215, C8407, C8420, C8422 C8504, C8513, C8521, C8523, C8525 C8527, C8529, C8531, C8533, C8535 CKSRYB103K50 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 x iao y u163. co m C8537, C8538, C8540, C8542, C8544 C8550, C8702, C8705, C8901, C8903 C8516 C8514 C8203 CKSRYB104K16 CKSRYB104K16 CKSRYB105K6R3 CKSRYB333K16 CKSRYB473K50 RESISTORS RS1/16S68R0F RS1/16S75R0F RS1/16S###J R8506 R8201 RAB4C101J RS1/16S1802F XV-DV99 64 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 L8002, L8004, L8501, L8502 L8201, L8203, L8204, L8401, L8402 L8504, L8701, L8702 UDZS6.8B QQ QQ IC8201 IC8401 IC8501 IC8901 IC8902 13942296513 13942296513 AEK7065 BA05FP BA4558F-HT BU4053BCF MM1505XN TEL TEL IC5601 IC1002, IC1003 IC8301-IC8303 IC8381, IC8382 IC8861 D8391, D8392 D AKP7045 AKP7064 GP1FA512RZB VEF1040 VKB1122 D DSP ASSY SEMICONDUCTORS C F Part No. QQ 376315150 892498299 Other Resistors A Description 4 6 http://www.xiaoyu163.com 5 Mark No. Description 7 8 Part No. Mark No. RS1/16S###J C603 C215 Description CKSRYB392K50 CKSRYB471K50 Part No. C202,C222 C606 CKSRYB473K16 CKSRYB561K50 QQ 376315150 892498299 Other Resistors OTHERS X8501 (27MHz) X8201 (24.576MHz) CN8003 13P SOCKET CN8007, CN8011 19P SOCKET KN8102 WRAPPING TERMINAL VSS1171 XSS3003 AKP7070 AKP7073 VNF1084 RESISTORS R211 R221 R233 R103,R104 Other Resistors E DSPTRADE ASSY CAPACITORS C8907 A RD1/4PU221J RD1/4PU222J RD1/4PU391J RS1/10S221J RS1/16S###J CKSRYB104K16 OTHERS OTHERS X201 FM/AM TUNER MODULE CRYSTAL RESONATOR (7.2MHz) B ASS1093 13942296513 13942296513 F CN201 13P FFC CONNECTOR 52044-1345 BN201 AKA7002 2P ANTENNA TERMINAL WITH PAL SHIELD CASE T ANK7072 SHIELD CASE B ANK7073 AKP7059 AKP7062 AKP7178 TEL TEL CN8901 13P PLUG CN8902, CN8903 19P PLUG CN8904, CN8905 23P SOCKET SEMICONDUCTORS BA1451F LC72131MD 2SC2412K DTA124ES DTC124EK D201 D202 D101 1SS133 MTZJ5.1C UDZS6.8B BA10FP BU1924F 1SS355 C5709, C5710 C5712 C5713 C5701, C5702, C5706, C5711 C5705, C5707 CCSRCH270J50 CCSRCH271J50 CCSRCH561J50 CEAT100M50 CEAT470M16 ATE7003 ATF-107 ATF-119 ATF1155 ATF7025 C5708 C5703, C5704, C5716 CKSRYB103K50 CKSRYB104K16 376315150 892498299 376315150 892498299 L601 IC5702 IC5701 D5701 QQ 3763 1515 0 89 2498 299 TEL 13942296513 FM DETECTOR COIL FM CERAMIC FILTER FM CERAMIC FILTER AM CERAMIC FILTER ANTIBIRDY FILTER SEMICONDUCTORS CAPACITORS COILS AND FILTERS L201 F202 F201 F203 F601 G TXTRADE ASSY LCTA270J2520 RESISTORS CAPACITORS Other Resistors C605 C212,C213,C226,C233-C235 C240,C614 C206 C231,C232 CCSQCH680J50 CCSRCH101J50 CCSRCH101J50 CCSRCH120J50 CCSRCH150J50 C223 C229 C224 C227 C241 CEAT100M50 CEAT101M10 CEAT1R0M50 CEAT220M25 CEAT2R2M50 C243 C228 C237 C211 C210 www CEAT330M16 CEAT3R3M50 CEAT470M10 CEJA1R0M50 CEJA470M16 CKSRYB102K50 CKSRYB103K50 CKSRYB103K50 CKSRYB153K50 CKSRYB182K50 C201,C205,C214,C230,C236 C244 C221 CKSRYB223K50 CKSRYB223K50 CKSRYB224K10 . ASS7004 52045-1345 52045-1945 VNF1084 SEMICONDUCTORS E IC1001 BA12FP IC8003, IC8401, IC8501-IC8506, IC8652 BA4558F-HT IC8001, IC8002 BU4051BCF IC8651 BU4052BCF IC8402 BU4066BCF IC1004 IC5501 Q5201, Q5202, Q5501, Q5572 Q8001-Q8004, Q8401, Q8402 Q8007, Q8008 NJM7805DL1A PDC110B 2SC4081 2SC4081 2SD2114K Q8005, Q8006, Q8010-Q8012 Q8403, Q8404, Q8406 Q8009, Q8014, Q8405, Q8407 Q5571 UN5112 UN5112 UN5212 UN521L F XV-DV99 5 6 D H CONTROL ASSY x iao y u163. co m C103,C104,C204,C238 C102,C208,C216,C217,C220 C239,C242,C604,C615 C225 C607,C608 RS1/16S###J OTHERS X5701 (4.332MHz) CN5702 13P FFC CONECTOR CN5701 19P FFCCONNECTOR KN5701 WRAPPING TERMINAL C QQ QQ IC201 IC202 Q201,Q204,Q205,Q601 Q202 Q203 http://www.xiaoyu163.com 7 65 8 1 Mark No. A 2 Description 3 http://www.xiaoyu163.com Part No. Mark No. Description 4 Part No. QQ 376315150 892498299 D1001 1SR154-400 Q3903-Q3906 2SD2114K D1006, D5575, D8003-D8006, D8009 D8001, D8002 D5201-D5203, D5205, D5206 D5605-D5610 1SS355 UDZS6.8B UDZS8.2B UDZS8.2B D3901 D3902 1SS355 UDZS11B CAPACITORS COILS AND FILTERS L5571 INDUCTOR L5601 CHIP BEADS LFEA220J VTL1075 C3909, C3910 C3907, C3908 C3901-C3904, C3930, C3932, C3935 C3905, C3906, C3933, C3940, C3942 C3911, C3912 CCSRCH101J50 CCSRCH470J50 CEAT100M50 CEAT470M16 CEJQNP101M16 C3913, C3914 C3931 C3936, C3939 C3915, C3916 CKSRYB102K50 CKSRYB103K50 CKSRYB104K16 CKSRYB223K25 CAPACITORS B CEAT1R0M50 CEAT222M10 CEAT470M16 CKSRYB102K50 CKSRYB103K50 C5571, C5573, C5580, C8055, C8057 C8059, C8061, C8403, C8404 C8407, C8408, C8505-C8512 C8517-C8524, C8529-C8536, C8540 C8659, C8660 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 C1001, C5513-C5516, C5574 C8063-C8065, C8070, C8661, C8662 CKSRYB104K16 CKSRYB104K16 TEL 13942296513 OTHERS CN3901 13P FFC CONNECTOR 3901 MINI JACK KN3901 WRAPPING TERMINAL SEMICONDUCTORS QQ Q5001 D5004-D5006 D5007, D5011-D5013 CAPACITORS C5012-C5014 C5002, C5051 C5052 C5018 C5001, C5004 RS1/16S1002F RS1/16S1002F RS1/16S1002F RS1/16S###J CCSRCH220J50 CEAL470M16 CFTLA104J50 CKSRYB103K50 CKSRYB104K16 RESISTORS Other Resistors RS1/16S###J OTHERS OTHERS E 2SC4081 1SS355 UDZS6.2B QQ 3763 1515 0 89 2498 299 RESISTORS R8501, R8502, R8505, R8506 R8511, R8512, R8515, R8516 R8521, R8522, R8525, R8526 Other Resistors 52044-1345 AKN7026 VNF1084 J LCDCONT ASSY TEL 13942296513 D RS1/10S101J RS1/16S###J X5501 (10MHz) CN5601 5P FFC CONNECTOR CN5501 7P FFC CONNECTORS CN3902 13P FFC CONNECTOR CN5605 19P FFC CONNECTOR ASS7034 52045-0545 52045-0745 52045-1345 52045-1945 8001 6P PIN JACK CN5602 20P SOCKET CN8501 12P CONNECTOR CN5201 10P CONNECTOR JA8002 2P PIN JACK AKB7012 AKP7129 AKP7131 AKP7134 RKB1041 CN5603 7P FFC CONNECTOR CN5502, CN5604, CN8401 30P FFC CONNECTOR KN1001 WRAPPING TERMINAL VKN1267 VKN1434 CN5001 9P SOCKET 5051 REMOTE RECEIVER UNIT AKP7068 GP1UM27XK K CONNECT ASSY SEMICONDUCTORS D5103 D5101, D5102 D5104, D5105, D5107-D5109 1SS355 HZU2.0B UDZS8.2B RESISTORS www I HP ASSY F SEMICONDUCTORS IC3901 IC3902 Q3911 Q3910 . Other Resistors RS1/16S###J OTHERS L x iao y u163 . co m VNF1084 CN5102 9P PLUG CN5101 10P CONNECTOR AKP7057 AKP7134 KEY R TOP ASSY SWITCHES AND RELAYS LC75344M NJM4560M 2SA1576A 2SC4081 S1902, S1903 ASG7013 XV-DV99 66 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 C5578 C5605 C1002, C8056, C8058, C8060, C8062 C5504 C1008, C1009, C5506, C5517, C5518 R3915-R3932 Other Resistors QQ CEAT100M50 CEAT100M50 CEAT100M50 CEAT101M16 CEAT102M10 13942296513 C8025, C8026, C8031-C8034 C8401, C8402, C8537, C8538 C8651, C8652, C8657, C8658 C5507, C5508, C5572, C8539, C8541 C5606 TEL ACH1246 CCSRCH101J50 CCSRCH101J50 CCSRCH221J50 CEAT100M50 RESISTORS C 376315150 892498299 C5575 (0.047F/5.5V) C5203, C5204, C5505, C5510, C5511 C5577, C8069, C8072 C8001-C8012 C1007, C1010, C5576, C8021, C8022 6 http://www.xiaoyu163.com 5 Mark No. Description 7 8 Part No. QQ 376315150 892498299 RESISTORS Other Resistors A RS1/16S###J OTHERS 1903 7P CABLE HOLDER CN1902 5P FFC CONNECTOR J1901 JUMPER WIRE 51048-0700 52044-0545 D20PYY0710E M KEY R ASSY SWITCHES AND RELAYS S1901 ASG7013 B RESISTORS Other Resistors RS1/16S###J TEL TEL OTHERS 51048-0600 51048-0700 D20PYY0625E 13942296513 13942296513 1905 6P CABLE HOLDER 1904 7P CABLE HOLDER J1902 PARALELL WIRE N KEY L ASSY SEMICONDUCTORS Q1904 D1901 2SC4081 SLR-343PC(LM) SWITCHES AND RELAYS ASG7013 RESISTORS Other Resistors RS1/16S###J QQ 3763 1515 0 89 2498 299 376315150 892498299 376315150 892498299 TEL 13942296513 QQ QQ S1904 OTHERS 1907 3P CABLE HOLDER 1906 6P CABLE HOLDER J1903 JUMPER WIRE 51048-0300 51048-0600 D20PYY0310E O KEY L TOP ASSY SWITCHES AND RELAYS S1905, S1906 ASG7013 RESISTORS Other Resistors C RS1/16S###J D OTHERS 1908 3P CABLE HOLDER 51048-0300 E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 67 8 1 3 http://www.xiaoyu163.com 2 4 6. ADJUSTMENT QQ 376315150 892498299 6.1 TUNER SECTION A AM Tuner Section • There is no adjustment in the AM tuner. FM Tuner Section • Set the mode selector to FM BAND. • Connect the wiring as shown in Fig. 1. B [ANT. INPUT SIGNAL] • Frequency : 98 MHz • Modulation : OFF • Input Level : 80 dBµV T-METER Adjustment L201 Adjustment value IC201 Pin 21/Pin23 MPX SG 0 ± 50mV Adjustment State Adjust L201 so that the DC voltage between Pin 21 and Pin 23 of IC201 (Test point "Vtm") gets within 0 ± 50mV. PRODUCT FM SG DC Voltmeter C FM75Ω antenna terminal 376315150 892498299 F FM/AM TUNER MODULE D L201 IC201 pin 21 pin 23 E SIDE B www F x iao y u163. co m Fig.2 Adjustment Point . XV-DV99 68 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ Fig.1 Adjustment Wiring Diagram 13942296513 13942296513 1 Adjustment Measurement point point Adjustment Title TEL TEL Step No. 6 http://www.xiaoyu163.com 5 7 8 6.2 ADJUSTMENT ITEMS AND LOCATION QQ 376315150 892498299 Adjustment Items Adjustment Points (Mechanism Part) [Mechanism Part] A Cautions: After adjustment, adjustment screw locks with the Screw tight. 1 Tangential and Radial Height Coarse Adjustment 2 DVD Jitter Adjustment 1 2 Radial adjustment screw 1 2 Tangential adjustment screw [Electrical Part] Electrical adjustments are not required. B TEL TEL 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 6.3 JIGS AND MEASURING INSTRUMENTS Screwdriver (large) Screwdriver (medium) C D Test mode remote control unit (GGF1381) TV monitor E Screw tight (GYL1001) www x iao y u163. co m Precise screwdriver . DVD test disc (GGV1025) Soldering iron F XV-DV99 5 6 http://www.xiaoyu163.com 7 69 8 1 2 3 http://www.xiaoyu163.com 4 6.4 NECESSARY ADJUSTMENT POINTS A QQ 376315150 892498299 When Adjustment Points Exchange Parts of Mechanism Assy Mechanical ~, Ÿ point Exchange the Pickup ∗ After adjustment, screw locks with the Screw tight. Electric point Mechanical point Exchange the Traverse Mechanism B TEL TEL Electric point Electric point C Exchange PCB Assy Electric point D E www F . x iao y u163. co m XV-DV99 70 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 LOAB and DVDM ASSY QQ 3763 1515 0 89 2498 299 Mechanical point QQ QQ TEL 13942296513 Exchange PC Board 13942296513 13942296513 ∗ After adjustment, screw locks with the Screw tight. Mechanical Ÿ point Exchange the Spindle Motor 6 http://www.xiaoyu163.com 5 7 8 6.5 TEST MODE QQ 376315150 892498299 A • The TEST MODE functions that are used only during adjustment are described here. For details, see "7.1.1 TEST MODE". TEST MODE: ON ESC TEST POWER GGF1381 Test mode remote control unit ON B TEL TEL TEST MODE: DISC SET CHECK DVD, CD <TRAY OPEN> 13942296513 13942296513 DVD disc OPEN/CLOSE OPEN/CLOSE (Player) (Player) DSC - &&& QQ QQ TEST MODE: PLAY <PLAY> 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 TV/LDP An address is displayed CAUTION: Perform only trace, video and audio outputs are nothing. < When playback with the target address of disc (DVD)> For example, when playback with # 30000 During PLAY +10 3 0 0 0 0 C CHP/TIM Press keys in order 030000 D E TEST MODE: OFF ESC www POWER x iao y u163. co m OR . OFF GGF1381 Test mode remote control unit F XV-DV99 5 6 http://www.xiaoyu163.com 7 71 8 1 2 3 http://www.xiaoyu163.com 4 6.6 MECHANISM ADJUSTMENT A QQ 376315150 892498299 1 Tangential and Radial Height Coarse Adjustment START • Remove the Loading Mecha. Assy. • Remove a Spacer for height adjustment attached to the back side (shaded area) of the Loading Mecha. Assy (Float Base) with nippers. Cautions: Because there is not a Spacer for height adjustment in adjustment after the second time, will keep it at need. (This parts is Traverse mechanism exclusive use of a model for 2003 years) 7.3mm B Loading Mecha. Assy Spacer for Height adjustment Note: Before removing the flexible cable for the pickup, soldering of the pickup circuit is necessary. For details, see "7.1.9 DISASSEMBLY". C Turn a flat side into bottom E www F . x iao y u163. co m XV-DV99 72 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 13942296513 13942296513 Put a spacer between a Tangential (or Radial) adjustment screw and Mechanism Base and turn each screw to adjust the height. (Refer to "6.1 ADJUSTMENT ITEMS AND LOCATION".) TEL TEL Float Base 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 2 DVD Jitter Adjustment • Playback method of inner and outer address for the purpose is refererd to "6.5 TEST MODE". • Jitter indication of the monitor is refererd to "7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE". A Use disc: GGV1025 START Mechanism Assy • Test mode • Play the DVD test disc at outer track (around #200000) • Play the DVD test disc at inner track (around #30000) Adjust the Tangential Adjustment Screw so that jitter becomes minimum. J : Min B Mechanism Assy TEL TEL Adjust the Radial Adjustment Screw so that jitter becomes minimum. 13942296513 13942296513 J : Min J: ---- QQ 0 OPEN/CLOSE STANDBY/ON QQ 3763 1515 0 89 2498 299 • Play the DVD test disc at outer track (around #200000) Monitor 376315150 892498299 Mechanism Assy Readjust the Tangential Adjustment Screw so that jitter becomes minimum. CHECK Turn the POWER OFF in case of NG once, and perform the adjustment once again. NG Confirm the error rate that is displayed "OK" (Example ERROR RATE: 6.6oe - 6 OK ) D J : Min K 376315150 892498299 TEL 13942296513 Player E O QQ TIMER C If error rate is OK, locks a root of tangential and radial adjustment screws with the Screw tight, and go to step ! . www Disc playback normally. • The measurement of block error rate ESC ESC 5 x iao y u163. co m Screw tight: GYL1001 . Test mode end F XV-DV99 5 6 http://www.xiaoyu163.com 7 73 8 1 2 3 http://www.xiaoyu163.com 4 7. GENERAL INFORMATION QQ 376315150 892498299 7.1 DIAGNOSIS A 7.1.1 TEST MODE Test Mode Functional Specification 1 Test mode entry In the power ON state, press the [ESC] (A8-5F) key and [TEST / RANDOM] (A8-5E) key in order of the Test mode remote control unit. • OSD displays test mode. Refer to the "7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE". 2 Release the Test mode • Turn off the power. • Press the [ESC] (A8-5F) key of the remote control unit and reset it. B 3 Tray open / close TEL TEL • Press the [REPEAT A-B] (A8 - 48) key of the remote control unit. • Press the [OPEN / CLOSE] key of the main unit from the stop state. 4 Playback stop 13942296513 13942296513 1. Press the [REPEAT] (A8 - 44) key of the remote control unit from the playback state. 2. Press the [STOP] key of the remote control unit or main unit from the playback state. (Playback stops, but the loaded disc keeps rotating.) 5 LD ON DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n). CD : Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n). C 6 Focus on / sweep CAV : Press the [TEST] (A8-5E) and [5] (A8-05) keys in order,then rise up the spindle and FG servo becomes on. CLV : Press the [TEST] (A8-5E) and [9] (A8-09) keys in order,then rise up the spindle and FG servo becomes on. 8 Tracking open / close 1. Open tracking by pressing the [STEP FWD] (A8-54) key of the remote control unit in the play state. 2. Close tracking by pressing the [STEP REV] (A8-50) key of the remote control unit in the play state. D 9 Slider servo on/off 1. Turn on the slider servo by pressing the [TEST] (A8-5E) and [CX] (A8-0E) keys in order. 2. Turn off the slider servo by pressing the [TEST] (A8-5E) and [TV/LDP] (A8-0F) keys in order. 0 Slider in / out Slider in : In the tracking off state, press the [SCAN REV] (A8-11) key of the remote control unit. Slider out : In the tracking off state, press the [SCAN FWD] (A8-10) key of the remote control unit. - Play (perform only the ID search and trace to the specified location) Press the [TV/LDP] (A8-0F) key of the remote control unit from the stop state. Perform only trace, video and audio outputs are nothing. E = Screen display ON/OFF 1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit. 2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit. www F . x iao y u163. co m XV-DV99 74 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 7 Spindle FG servo QQ QQ 1. Lock the focus by pressing the [TEST] (A8-5E) and [2] (A8-02) keys in order. 2. Repeat focus sweep by pressing the [TEST] (A8-5E) and [3] (A8-03) keys in order. 6 http://www.xiaoyu163.com 5 7 8 ~ Search QQ 376315150 892498299 1. Search address input entry • It becomes the address input mode when pressing the [+10] (A8-1F) key. (Most significant digit of an address displays "<".) • In this time, display the last address as the initial state. A 2. Search address input • Press the [0] to [9] (A8-00 to 09) keys of the remote control unit. In the DVD, set an address with hexadecimal. • In the address input mode, turn to the hexadecimal input by pressing the [PROGRAM] (A8-4C) key (display a "∗" mark), and [1] to [6] keys are each input as A to F. • Hexadecimal input and decimal input can switch with toggle. • In case of CD, perform only the absolute time search. 3. Search execution • Press the [CHP/TM] (A8-13) key of the remote control unit. • After the search, perform only trace and video and audio outputs are nothing. B TEL TEL 4. Release the Search address input • Clear the address by pressing the [CLEAR] (A8-45) key. Release the address input mode when pressing the [CLEAR] key once again. 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 75 8 1 2 3 http://www.xiaoyu163.com 4 7.1.2 DISPLAY SPECIFICATIONS OF THE TEST MODE A QQ 376315150 892498299 2 Character in bold : Item name : Information display 3 7 8 9 12 14 1 5 6 13 15 B 16 17 18 19 10 11 0 Disc sensing [DSC – ∗ ∗ ∗] The type of discs loaded is displayed. [DVD], [CD ], [ ] 2 Code indication of remote control unit [R – ∗ ∗ ∗ ∗] In case of double code, display a 2nd code. = Version of the AV-1 chip / version of firmware [AV: ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗] ! Region setting of the player [REG: ∗] Setting value : [1] to [6] @ Destination setting of the System Control Microcomputer [MDL: ∗ ∗ ∗ ∗ / ∗ ∗ ∗] Four characters in the front represent the type of model. Three characters in the back represent the destination code. J: /J, K: /KU, /KC, /KU/KC, R: /RL/RD, RAM : /RAM, LB: /LB, WY: /WY 6 Spindle status [SPDL – ∗ ∗ ∗] [OFF], [ACC/BRK], [CAV], [CLV] 7 Mechanism (loading) position value [M – ∗ ∗] Unknown : [01] or [41] Open state : [04] Close state : [08] During opening : [12] During closing : [22] # Part number of the flash ROM and DVD Control Microcomputer [∗ ∗ ∗ ∗ ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗] 8 Slider position [S – ∗ ∗ ∗ ∗] In Side Switch ON : [01] In Side Switch OFF : [00] $ Version of the flash ROM [V: ∗. ∗ ∗ ∗] Flash ROM size [FLASH = ∗ ∗] E 9 Output video system [V – ∗ ∗ ∗ ∗] NTSC system : [NTSC] PAL system : [PAL] Automatic setting : [AUTO] Scart terminal output [SK – ∗ ∗] (Display only the WY model which can do the output setting of scart terminal.) VIDEO : [00] S-VIDEO : [01] RGB : [02] www . % Revision of the DVD Control Microcomputer [S: ∗. ∗ ∗ ∗ / ∗. ∗ ∗ ∗] version . revision / build number of the ST core ^ Revision of the DVD mechanism controller [M: ∗ ∗ / ∗ ∗ ∗] Kinds of version / firmware of the FE. RAM or ROM x iao y u163. co m XV-DV99 76 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 5 Tracking status [TRKG – ∗ ∗ ∗] Tracking on : [ON] Tracking off : [OFF] QQ QQ QQ 3763 1515 0 89 2498 299 ~ Version of the FL controller [FL: ∗ ∗ ∗ ∗] 3 Main unit keycode indication [K – ∗ ∗] F - Jitter value [J – ∗ ∗ ∗ ∗] 13942296513 13942296513 D TEL TEL C 1 Address indication The address being traced is displayed in number. (as for the DVD, indication of decimal number is possible.) DVD : ID indication (hexadecimal number, 8 digits) [∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗] CD : A-TIME (min. sec.) [0 0 0 0 ∗ ∗ ∗ ∗] 6 http://www.xiaoyu163.com 5 7 8 7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY QQ 376315150 892498299 Only during normal playback, the following shortcut keys can be assigned by pressing a required key after pressing the ESC key of the remote control unit. To quit, press the ESC key Command Contents Memory clear and resion / revision indication CLEAR (∗1) A8-45 Average value measurement of DVD error rate 5 (∗1) A8-05 CD error rate measurement 5 (∗1) A8-05 Aspect : Pan scan 2 A6-01 Aspect : Letter box 3 A6-02 Aspect : Wide 4 A6-03 Digital : AC3 5 A6-04 Digital : AC-3 > PCM 6 A6-05 Virtual surround : OFF 7 A6-06 Only for models having the corresponding functions Virtual surround : TruSurround A6-A1 AF-E4 STEP FWD A6-A1 AF-B7 DTS Digtal output OFF STEP REV A6-A1 AF-B8 AUDIO A6-A1 AF-BE Scart terminal output : VIDEO WY, models equipped with Scart terminal SUBTITLE A6-A1 AF-36 ANGLE A6-A1 AF-B5 R_SKIP A6-92 Scart terminal output : RGB Progressive OFF Only for progressive models Progressive ON Only for models having the corresponding functions Audio 5.1 CH ON A6-91 A6-74 CX (∗1) A8-0E STEREO (∗1) A8-4A FL indication of EDC / ID error FL indication of ID number ZOOM ZOOM OFF A6-A1 AF-37 < X3 (∗1) A8-59 CHP/TIM (∗1) A8-13 CHAP (∗1) A8-40 Background color change +10 (∗1) A8-1F Audio last stage mute ON 9 A6-08 Audio last stage mute OFF 0 A6-09 Title search Input mode IN Title No. input Search execution SIDE A (∗1) Numbers (∗1) PLAY (∗1) A8-4D A8-00 to A8-09 A8-17 Region confimation mode AUDIO (∗1) Numbers (∗1) A8-1E A8-01 to A8-08 Service mode indication (error rate indication, etc.) Model information indication ∗1 : Test mode remote control unit • Service mode indication (ESC + CHP/TIM keys) ID Address The error rate is always displayed in exponential notation, e.g., ∗.∗ ∗ e - ∗, for both DVDs and CDs. EDC/ID/AV 1 error history (ID Address, EDC/ID/AV 1 Error, last eight errors) Self-diagnosis functions (If a mechanical error has occurred, the mechanical-error history is also displayed.) • Calculation of the average error rate (ESC + "5" [Test mode remote control unit] keys) The average of the last eight error rates is calculated and indicated in exponential notation. After the calculation is completed, "OK" or "NG" is displayed. If "NG" is displayed, the disc tray will open (for both DVDs and CDs) For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 ZOOM ON (X4) C QQ QQ F_SKIP KD_ENTER 13942296513 REPEAT B DTS Digital output ON B TEL Digital output OFF 13942296513 A6-07 A6-A1 AF-E8 TEL 8 REPEAT A Digital output ON Scart terminal output : S-VIDEO A Remote Control Remote Key Name Control Code Conditions D E • Indication of model information (ESC + CHAP keys) The items from 12 to 19 of the TEST MODE Indications are displayed. However, in the indications, S in the standard test mode is changed to B.E VERSION, and M is changed to F.E VERSION. For details, see 7.1.4. x iao y u163. co m • Change of the background colors (ESC + "+10" [Test mode remote control unit] keys) www Every time the keys are pressed, the background color is changed between blue and green alternately. (The green background is used in SETUP NAVIGATOR.) • Region confirmation mode (ESC + AUDIO [Test mode remote control unit] + "1"-"8" [Test mode remote control unit] keys) . After you press the AUDIO key while holding the ESC key pressed and then input the region number, if the number is different from that set in the unit, an error message is displayed, and the tray opens. XV-DV99 5 6 http://www.xiaoyu163.com 7 77 8 F 1 2 3 http://www.xiaoyu163.com 4 7.1.4 SPECIFICATION OF MODEL INFORMATION QQ 376315150 892498299 To display model information : Press the ESC key then the CHAP key. To close the model information display : Press the ESC key. A • Display contents 2 12 11 3 1 B TEL TEL 4 5 13942296513 13942296513 6 7 8 9 10 Character in bold : Item name : Information display C D E 8 CHIP VERSION Version of ST CHIP CUT ID / JTAG ID (two columns) (eight columns) 9 B.E VERSION Version of BACK END (version of ST core software) . / softwareVersion . softwareRevision / buildNumber 0 F.E VERSION Version of FRONT END (version of mechanism controller CHIP software) / MainVersion / Kinds of firmware RAM or ROM - Remote control code = Key code of Main unit www F . x iao y u163. co m XV-DV99 78 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ 1 Model name Display it according to model information set from the System Control Microcomputer. 2 Destination indication Display it according to model information set from the System Control Microcomputer. 3 Region No. 4 Part number 5 ROM version 6 Flash size 7 FL controller version 6 http://www.xiaoyu163.com 5 7 8 7.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE QQ 376315150 892498299 • EDC / ID error LCD display (shortcut function) EDC/ID error is displayed on the LCD display if you press the CX key while holding the ESC key on the TEST MODE remote control unit pressed. To quit while an EDC/ID error is displayed, press the ESC key. A LCD display 00 /00 / 01 ∗ ∗: Lights when an AV1 error was generated at least once. Number of sites where an EDC or ID error was generated Number of retrials while an ID error is being generated (only displayed at the moment when an error is being generated), and for the ST models, the number of retrials made for the latest ID error Number of retrials while an EDC error is being generated (only displayed at the moment when an error is being generated), and the number of retrials made for the latest EDC error B TEL TEL • Display during Service Mode 13942296513 13942296513 To enter Service Mode, press the CHP/TIM key while holding the ESC key pressed. To quit, press the ESC key. Service mode display 1 ID Address 2 Error rate (always displayed), in exponential notation ∗∗ (∗∗∗∗) Number of error rates QQ QQ 02: Indicates use of the same method as for the 02 models, No indication: Indicates use of the method used for models before the 02 model 3 EDC/ID/AV1 error history (ID Address, EDC/ID/AV1 errors, last eight errors) Description of AV1 errors BIT0: In BE code, an EDC error, FEC I/F buffer overflow, or "not valid" is generated (B.E error) BIT1: In BE code, the ID is different from that of the target (B.E error) BIT2: An error was generated in FE-added 2-byte EDC data. (F.E error) 4 Self-diagnosis functions Whether F.E is normal or not is checked. FE OK: No abnormality in F.E FE Error: Abnormality is recognized in F.E. Pressing the CHP/TIM key again displays the mechanical error history. Each press of the CHP/TIM key changes the displays between the mechanical error history and the Service Mode display. For details on the mechanical error history, refer to the addendum. Indication plan contents 3 1 2 4 www . AV1 ERR 00 01 02 03 04 05 06 07 2 0 0 0 0 1 1 1 1 BIT 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 D E x iao y u163. co m Character in bold : Item name : Information display F XV-DV99 5 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C 6 http://www.xiaoyu163.com 7 79 8 1 2 3 http://www.xiaoyu163.com 4 7.1.6 MECHANICAL ERROR HISTORY Mechanical Error History A QQ 376315150 892498299 Only if a mechanical error (FE error) has been generated, a mechanical error history containing up to the last eight errors is displayed if you press the "ESC" + "CHP/TIM" key in Normal Mode. Errors are displayed in descending order, with the latest one at the top. Description of the mechanical error history 1 Error number The first two digits are for the error code, and the second two digits are for the servo state. Note: When an error has been generated, if the servo state is "Disc judge," the disc tray opens, and if the servo state is other than "Disc judge," the unit stops (excluding a case of a device error with the error code 0xd∗). Servo State Error Code B Indication contents 2 3 2 3 1 1 13942296513 13942296513 3 Description of errors Error messages are displayed. Example: If the error code is 0x13 (Focus lost timeout) and the servo state is 0x05 (Disc judge), the message becomes "Focus lost timeout in Disc judge." C 0x0∗ FOCUS TIMEOUT 0x1∗ 0x00 Reset Focus on error 0x01 Focus on timeout 0x11 0x01 Stop (inside position) Focus off error 0x02 Focus off timeout 0x12 0x02 Stop (any position) Focus lost error 0x03 Focus lost timeout 0x13 0x03 Braking for stop Focus balance adjust error 0x04 Focus balance adjust timeout 0x14 0x04 New disc Focus gain adjust error 0x05 Focus gain adjust timeout 0x15 0x05 Disc judge Focus sweep error 0x06 Focus sweep timeout 0x16 0x06 Reserved 1 Focus reflection error 0x07 Focus reflection timeout 0x17 0x07 Playing TEL 13942296513 TRACKING ERROR Tracking on error QQ 3763 1515 0 89 2498 299 0x2∗ TRACKING TIMEOUT 0x3∗ 0x08 Start up 0x21 Tracking on timeout 0x31 0x09 Seeking Pausing Tracking off error 0x22 Tracking off timeout 0x32 0x0A Tracking lost error 0x23 Tracking lost timeout 0x33 0x0B Reading BCA Tracking balance adjust error 0x24 Tracking balance adjust timeout 0x34 0x0C Reserved 2 Tracking gain adjust error 0x25 Tracking gain adjust timeout 0x35 0x0D STEPPING ERROR 0x4∗ STEPPING TIMEOUT 0x5∗ 0x0E Tray open Stepping on error 0x41 Stepping on timeout 0x51 0x0F Tray moving Stepping off error 0x42 Stepping off timeout 0x52 Stepping lost error 0x43 Stepping lost timeout 0x53 Stepping move error 0x44 Stepping move timeout 0x54 SPINDLE ERROR 0x6∗ SPINDLE TIMEOUT 0x7∗ Spindle on error 0x61 Spindle on timeout 0x71 Spindle off error 0x62 Spindle off timeout 0x72 Spindle lost error 0x63 Spindle lost timeout 0x73 Spindle CAV error 0x64 Spindle CAV timeout 0x74 Spindle CLV error 0x65 Spindle CLV timeout 0x75 ACQUISITION ERROR www 0x8∗ PLL lost error DECODER ERROR 0xa∗ ID lost error DEVICE ERROR SRAM error F 0xa3 . ACQUISITION TIMEOUT 0x9∗ x iao y u163. co m 0x83 PLL lost timeout 0x93 DECODER TIMEOUT ID lost timeout 0xb∗ Note : 0 x & & 0xb3 0xd∗ code (Only this part is displayed to a display) 0xd1 XV-DV99 80 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 E • List of the servo states FOCUS ERROR QQ QQ D • List of the error codes TEL TEL 2 Error number The elapsed time from the time when the system was turned on until an error was generated is displayed. Note: If a later error time is shorter than the previous error time, it means that the unit was turned off then on again. 6 http://www.xiaoyu163.com 5 7 8 ERROR CODE TABLE QQ 376315150 892498299 Error Name No. Causes Check Item Possibility of Trouble Remarks FOCUS ERROR (0 x 0∗) Focus on error 0 x 01 Focus on could not be completed Are not there a dirt or a scratch in 1. Pickup the Disc? Does LD become weak? 2. Driver Does the lens move up and down? 3. Front End IC Focus off error 0 x 02 Focus off could not be completed Unknown Focus lost error 0 x 03 Focus servo is lost Are not there a dirt or a scratch in 1. Pickup the Disc? Does LD become weak? Focus balance adjust error 0 x 04 AFB on could not be completed Focus gain adjust error 0 x 05 Focus AGC could not be completed Focus sweep error 0 x 06 Focus reflection error 0 x 07 Dimensions of S curve did not reach to the aim value Does LD become weak? A 1. Pickup FOCUS TIMEOUT (0 x 1∗) Are not there a dirt or a scratch in 1. Pickup the Disc? Does LD become weak? 2. Driver Does the lens move up and down? 3. Front End IC 0 x 11 Did timeout at focus on Focus off timeout 0 x 12 Did timeout at focus off Focus lost timeout 0 x 13 Did timeout at focus backup 0 x 14 Did timeout at AFB Focus gain adjust timeout 0 x 15 Did timeout at AGC Focus sweep timeout 0 x 16 13942296513 13942296513 Focus balance adjust timeout B TEL TEL Focus on timeout TRACKING ERROR (0 x 2∗) 1. Pickup 2. Driver 3. Front End IC 0 x 21 Tracking on could not be completed Tracking off error 0 x 22 Tracking off could not be completed Tracking lost error 0 x 23 Tracking servo is lost Tracking balance adjust error 0 x 24 ATB could not be completed 1. Pickup Tracking gain adjust error 0 x 25 AGC could not be completed 1. Pickup Tracking jump error 0 x 26 Tracking jump could not be completed 1. Pickup Tracking on timeout 0 x 31 Did timeout at tracking on Tracking off timeout 0 x 32 Did timeout at tracking off Tracking lost timeout 0 x 33 Did timeout at tracking backup Are not there a dirt or a scratch in the Disc? 1. Pickup 2. Driver 3. Front End IC Are not there a dirt or a scratch in the Disc? 1. Pickup Tracking balance adjust timeout 0 x 34 Did timeout at ATB 1. Pickup Tracking gain adjust timeout 0 x 35 Did timeout at AGC 1. Pickup Tracking jump timeout 0 x 36 Did timeout at tracking jump 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 TRACKING TIMEOUT (0 x 3∗) STEPPING ERROR (0 x 4∗) Stepping on error 0 x 41 Stepping on could not be completed Stepping off error 0 x 42 Stepping off could not be completed Stepping lost error 0 x 43 Stepping servo is lost Stepping move error 1. Pickup 2. Driver 3. Front End IC Do move to inner and outer periphery 1. Stepping motor of the stepping in the test mode? 2. Inside switch Do indicate "S-04" at the most inner 3. Driver periphery of the stepping? 0 x 44 Stepping could not move Stepping on timeout 0 x 51 Did timeout at stepping on Stepping off timeout 0 x 52 Did timeout at stepping off Stepping lost timeout 0 x 53 Did timeout at stepping backup www . 1. Pickup 2. Driver 3. Front End IC Do move to inner and outer periphery 1. Stepping motor of the stepping in the test mode? 2. Inside switch Do indicate "S-04" at the most inner 3. Driver periphery of the stepping? x iao y u163. co m 0 x 54 Did timeout at stepping movement F XV-DV99 5 D E STEPPING TIMEOUT (0 x 5∗) Stepping move timeout C QQ QQ Tracking on error 6 http://www.xiaoyu163.com 7 81 8 1 4 QQ 376315150 892498299 Error Name A 3 http://www.xiaoyu163.com 2 No. Causes Check Item Possibility of Trouble Remarks SPINDLE ERROR (0 x 6∗) Spindle on error 0 x 61 Spindle on could not be completed Spindle off error 0 x 62 Spindle off could not be completed Spindle lost error 0 x 63 Spindle lost control Spindle CAV error 0 x 64 CAV on could not be completed Spindle CLV error 0 x 65 CLV on could not be completed SPINDLE TIMEOUT (0 x 7∗) 0 x 72 Did timeout at spindle stop Spindle lost timeout 0 x 73 Did timeout at spindle backup Are not there a dirt or a scratch in the Disc? Is FG output from the driver? 1. Spindle motor 2. Spindle driver Spindle CAV timeout 0 x 74 Did timeout at CAV on Is spindle rotating? Is FG output from the driver? Is the PDM output from L6315? 1. Spindle motor 2. Spindle driver 3. Front End IC Spindle CLV timeout 0 x 75 Did timeout at CLV on 0 x 83 PLL is lost Are not there a dirt or a scratch in the Disc? 1. Pickup 2. Front End IC 0 x 93 Did timeout at PLL backup Are not there a dirt or a scratch in the Disc? 1. Pickup 2. Front End IC 0 x a3 ID is not readable Are not there a dirt or a scratch in the Disc? 1. Pickup 2. Front End IC 0xb3 Are not there a dirt or a scratch in the Disc? 1. Pickup 2. Front End IC B TEL 13942296513 C ACQUISITION ERROR (0 x 8∗) PLL lost error ACQUISITION TIMEOUT (0 x 9∗) PLL lost timeout DECODER ERROR (0 x a∗) ID lost error DECODER TIMEOUT (0 x b∗) ID lost timeout Did timeout at ID backup Power supply of SRAM Is not bus line short-circuiting? 0 x d1 Cannot access SRAM 0 x e1 1. software runaway 3. Software bug Unexpected error D E www F . x iao y u163. co m XV-DV99 82 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 FAILSAFE (0 x e∗) Unexpected error 1. SRAM 2. Front End IC 3. Front End-SRAM bus line QQ 3763 1515 0 89 2498 299 TEL 13942296513 SRAM error QQ QQ DEVICE ERROR (0 x d∗) 13942296513 0 x 71 Did timeout at spindle on Spindle off timeout TEL Spindle on timeout 6 http://www.xiaoyu163.com 5 7 8 Protection Specifications and Service Mode QQ 376315150 892498299 Protection Specifications The system microcomputer (CONTRL Assy IC5501) for this unit always monitors if abnormality of the power is generated, and as soon as an abnormality is detected shuts off the power. The specifications of the microcomputer terminal for monitoring are as follows: Name of microcomputer terminal XPROTECT (Pin 22) Voltage at terminal VDET (Pin 17) Abnormality of AMP-system power Short-circuiting of the SP terminal, etc. Abnormality of power inside the DVDM Assy In normal conditions In abnormal conditions 0.71× Vdd∗ or more 0.36×Vdd–0.71× Vdd∗ 0.5 Vdd-0.85 Vdd∗ In failure 0.36×Vdd∗ or less Monitoring item Monitoring start time Time required for determining abnormality 0.85 Vdd∗ or more 0.5 Vdd∗ or less 1.5 sec after power is turned on 0.5 sec after detection 1.5 sec after power is turned on 0.5 sec after detection ∗Vdd = Approx. 5 V (depending on the unit) 13942296513 13942296513 This unit has Service Test mode for analyzing the above power abnormality. Its specifications are as follows: 1. Specific conditions for Service Test mode • VDET is neglected. • XPROTECT is neglected. • Even if the unit is urgently shut down in failure in Normal mode, you can turn it on without waiting for one minute. • Able to operate without AC pulse. • Only DVD-TUNER block can operate without AMP POWER block if supplying needed DC voltage. 2. How to enter Service Test mode • To quit Service Test mode, turn the power off or disconnect the AC power cord. • When quitting Service Test mode, only data on protection in RAM are cleared. 4. Indications when Service Test mode starts • Indications on the LCD display when Service Test mode starts differ depending on whether the unit was turned off normally or if the unit [After the power is shut down because of an abnormality in the AMP system] LCD display P R T C T W N G We l c om e ! LCD display V o l u m e LCD display D V LCD display V o l u m e 0 LCD display D V S E R V I C E [After the power is shut down because of a failure in the AMP system] LCD display P R T C T LCD display V o l u m e 0 S E R V I C E [After the power is shut down because of a failure in the DVD system] LCD display D V D E R R P R T E C T LCD display V o l u m e 0 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 3. How to quit Service Test mode, and the conditions for quitting LCD display C QQ QQ • While connecting STEST port (IC5501 Pin43) to "+5V", connect AC power cord. (See next page.) [After the power is turned off normally] B TEL TEL In abnormal conditions or in failure, the TIMER LED flashes after the power is shut off. If the power was shut off because of an abnormality, it can be turned on by pressing the STANDBY/ON key. However, if the power was shut off because of failure, for one minute after a shutdown the STANDBY/ON key is disabled in order to protect against possible ignition of fumes. If the AC power cord is pulled out during this one minute of standby, when the AC power cord is reconnected, the STANDBY/ON key will still be disabled until the remaining seconds have elapsed. TEL 13942296513 A D 0 E LCD display D V LCD display D V S E R V I C E S E R V I C E 5. Operations during Service Test mode • Basically, operations in Service Test mode are the same as in Normal mode. However, to clarify that it is in Service Test mode, during this mode, when functions are changed, the indications on the LCD display become as follows: [Functions] [Indications on the LCD display] [Functions] [Indications on the FL display] DVD/CD www TUNER LINE1 ANA LINE1 DIG . x iao y u163. co m D V S E R V I C E LINE2 L 2 S E R V I C E T X S E R V I C E TV T V S E R V I C E L 1 a S E R V I C E L 1 d S E R V I C E F XV-DV99 5 6 http://www.xiaoyu163.com 7 83 8 1 3 http://www.xiaoyu163.com 2 4 QQ 376315150 892498299 Service Test mode connecting point A SIDE A B TEL TEL H CONTROL ASSY 13942296513 13942296513 Connecting point SIDE A CN5604 11 R5542 R5554 R5555 R5557 R5559 R5561 R5563 IC8402 14 4 1 C8404 7 C8538 5 R8422 C8412 1 C8537 8 C5606 C8402 IC8401 C8410 30 30 C8401 8 GNDD For service point short R8403 C8503 R8503 8507 C8501 IC8502 2 02 06 41 539 5607 x iao y u163. co m IC8501 R8504 C GNDA Q8402 Q8403 XV-DV99 84 1 2 3 http://www.xiaoyu163.com 4 R8401 26 R5562 R5564 R5565 R5547 R5549 R5551 R5545 R5558 R5560 C5507 R5544 R5546 R5548 R5550 R5552 R5553 PRODUCTION CODE DIRRST 5.DIRERR XTLO DIGSEL XTVMUTE 1.AUDIOSELA C8403 C8411 C8409 R8421 VPR+8 CN5502 51 . 15.DSPDI DSPDO DSPCK DSPRST DSPSS 10.DSPHREQ DSPMODE DIRDO DIRCS R5566 11 80 R5599 0MUTE MUTEOUT DSPMUTE DECMUTE R5570 R5556 VA-12 R5573 R5571 R5572 R8509 R8505 R8501 80 R5582 R5576 R5575 81 81 50 www F DOUT GNDD GNDD GNDM 25.GNDM VPR+8M VPR+8M VPR+8 VPR+8 30.VDVD+12 15.SYSCS2 SYSCS1 XDVDRST DVDPOW GNDD 20.GNDD VD+5 VPR+8 VPR+8 25.GNDRTN R5581 GNDRTN R5580 R5579 OPTIN GNDU R5578 GNDU R5577 20.DVDMUTE R5584 R5568 R5569 C5510 R5526 R5528 30 30 50 E 30.VA-12 XPROTECT R5574 51 7 CE3 R5583 R5531 R5532 R5541 R5540 R5533 R5534 R5535 R5536 R5537 R5538 R5539 7 CN5501 R5585 1 31 31 R5530 R5529 IC5501 1 1 1 C5508 5 E+5 100 100 5 X5501 TEST Knife Line L5601 R5607 ACK R5519 R5518 1 1 376315150 892498299 R5506 R5515 R5507 UTEST D QQ 3763 1515 0 89 2498 299 R5505 R5504 R5502 R5501 R5522 R5521 R5520 1.CTS KN1001 R5525 R5524 R5523 CN5601 C5603 C5604 B GNDM VPR+8 376315150 892498299 TEL 13942296513 VE+56 30 30 QQ QQ A 13 RTS RXD TXD 5.XVMUTE DVDMUTE ZERO VDET GNDD 10.GNDD 13 MDATA SDATA SCLK 11 CN3902 R5517 R5516 C5605 C 6 http://www.xiaoyu163.com 5 7 8 7.1.7 ID NUMBER AND DATA SETTING QQ 376315150 892498299 Caution: For the DVD players compatible with DVD-RW, for playback of a DVD-RW disc (CPRM), it is necessary that an individual ID number and ID data are set for each player. If the ID number and ID data be not properly set in the manner described below, future operations cannot be guaranteed. The ID number is written on the yellow label at the rear panel of the player. If there is no yellow label, before downloading FLASH ROM, take note of the ID number set following the procedures outlined in "ID Number Confirmation Mode" on the next page. A Note: Enter ID numbers while the unit is in Stop mode so that the values set will be immediately written to the flash ROM. The following operations are all made with the TEST MODE remote control unit (GGF1381). ID Number Input Mode 1 To enter ID Number Input Mode, with no ID number set, such as in a case of immediately after upgrading the firmware, press the ESC key then the STEREO key. 3 By pressing the CLEAR key without having input a number, you can exit this mode. Each press of this key after a number has been input deletes one digit. 6 [Player's ID Number Setting] ID Number ? >--------- Input ID Number ! 8 After entering all 9 digits, if you press the PLAY key, the unit compares the numbers input in Steps 2 and 6, and only if the numbers match, that number is set as the ID. Then the unit automatically enters ID DATA Input Mode. If the numbers do not match, the disc tray is opened, and the unit exits ID Number Input Mode. Input ID Number ! 4 After entering all 9 digits, if you press the PLAY key, the unit enters Compare mode. Enter the same ID number again. Only if your two input numbers match, the ID number is set. Compare mode helps eliminate mistyping of the ID number. Note: If you press the PLAY button before inputting a 9-digit ID number, the unit returns to Step 6 without doing anything else. [Player's ID Number Setting] ID Number ? 000000001 Compare > 0 0 0 0 0 0 0 0 1 OK? Note: If you press the PLAY button before inputting a 9-digit ID number, the unit returns to Step 2 without doing anything else. 5 After entering all 9 digits, if you press the SEARCH key, the unit unconditionally sets the input number as the ID number. Then the unit automatically enters Player's Data Input Mode. (The SEARCH key is not accepted after all 9 digits have been entered.) 8 Input ID Number ! www D <PLAY> Enter E [Player's ID Number Setting] ID Number ? > 0 0 0 0 0 0 0 0 1 OK ? 4 5 376315150 892498299 376315150 892498299 TEL 13942296513 C QQ QQ QQ 3763 1515 0 89 2498 299 <CLEAR> Exit 3 [Player's ID Number Setting] ID Number ? 000000001 Compare >∗∗∗∗∗∗∗∗∗ 13942296513 13942296513 2 Enter a 9-digit ID number. The ID number is also displayed on the LCD display. 2 B 7 By pressing the CLEAR key without having input a number, the unit returns to Step 2 without doing anything else. Each press of this key after a number has been input deletes one digit. TEL TEL Note: If a previous ID number and ID data, such as a factorypreset ID number and ID data, are maintained, the unit enters ID Number Confirmation Mode when the above keys are pressed. However, if only an ID number is maintained, the unit enters ID Data Input Mode. 6 This display appears when the PLAY key is pressed in Step 4. Enter a 9-digit number to compare. The number is also displayed on the LCD display. <PLAY> Compare Mode <SEARCH> Enter x iao y u163. co m Input ID Number ! . F XV-DV99 5 6 http://www.xiaoyu163.com 7 85 8 1 2 3 http://www.xiaoyu163.com 4 ID Number Confirmation Mode A QQ 376315150 892498299 1 To enter ID Number Confirmation Mode after the ID number and the ID data are set, press the ESC key then the STEREO key. 2 The ID number already set is displayed. (It is also displayed on the LCD display.) 3 Enter a 9-digit number for comparison. This is not required when you only wish to check the ID number visually. (The number is also displayed on the LCD display.) 4 By pressing the CLEAR key without having input a number, you can exit this mode. Each press of this key after a number has been input deletes one digit. 2 <CLEAR> Exit 4 13942296513 13942296513 Input ID Number ! 5 After entering all 9 digits, if you press the PLAY key, the unit compares the number entered in Step 2 with the ID number set, and only if the numbers match, the unit automatically exits ID Number Confirmation Mode. If an ID data has not been entered, the unit enters ID DATA Input Mode. If the numbers do not match, the disc tray is opened, and the unit exits ID Number Confirmation Mode. QQ 3763 1515 0 89 2498 299 6 After entering all 9 digits, if you press the STOP key, the unit compares the number entered in Step 3 with the ID number set, and only if the numbers match, the unit automatically deletes the ID number and exits this mode. If the numbers do not match, the disc tray is opened, and the unit exits this mode. (The STOP key is not accepted after all 9 digits have been entered.) [Player's ID Number Setting] ID Number ? [000000001] Compare > 0 0 0 0 0 0 0 0 1 OK? <PLAY> Enter <STOP> Memory Clear 5 6 E Input ID Number ! www F . x iao y u163. co m XV-DV99 86 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 Note: If you press the PLAY button before inputting a 9-digit ID number, the unit returns to Step 4 without doing anything else. QQ QQ D If no ID number is set, the message "No ID Number!" flashes on the screen and LCD display for a few seconds after the power is turned on or during Stop mode. TEL TEL C 3 An ID number already set is displayed in the following cases: 1) When the ESC key then the CLEAR key are pressed, user settings are cleared, then the ID number set is displayed on the screen. In this case, the ID number is not displayed on the LCD display. 2) When the unit enters ID Number Confirmation Mode by your pressing the ESC key then the STEREO key, the ID number set is displayed. In this case, the ID number is also displayed on the LCD display. If you only need to confirm the ID number, you can exit this mode by pressing the CLEAR key or turning off the power. • Indication when no ID number is set [Player's ID Number Setting] ID Number ? [000000001] Compare >∗∗∗∗∗∗∗∗∗ B • Indication of an ID number already set 6 http://www.xiaoyu163.com 5 7 8 ID DATA Input Mode QQ 376315150 892498299 1 To enter ID DATA Input Mode, with the ID number set, press the ESC key then the STEREO key. 2 When the STEREO key is pressed, the unit enters ID DATA Input Mode. 5 When writing of the data read from the disc to flash ROM is completed, "Rom Write OK!" is displayed. After seeing this message, you can exit this mode by pressing the CLEAR key. Note: Whether or not the data have been written to flash ROM can be confirmed by watching for the message "Rom Write OK!" being displayed after the disc is read. [Player's Data Input Mode] [Player's ID Number Setting] ID Number ? [000000001] Compare >∗∗∗∗∗∗∗∗∗ 5 Rom Write OK! B <CLEAR> Exit <CLEAR> Exit <STEREO> ID Data Setting Mode 2 TEL TEL Input ID Number ! 6 If the data cannot be read from the disc, "Disc Error!" is displayed on the screen, and the disc is ejected. 4 To exit this mode, press the CLEAR key. While data are being read from the DVD DATA DISC (GGV1085), you cannot exit this mode. [Player's Data Input Mode] 13942296513 13942296513 3 If the DVD DATA DISC (GGV1085) is loaded in this mode, the unit automatically starts reading the data. (If the ID DISC has already been loaded, the unit does not start reading the data. In this case, open then close the tray.) Disc Error! 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 <CLEAR> Exit <CLEAR> Exit Insert The ID Data Disc ! C QQ QQ [Player's Data Input Mode] 4 A • Indication when the data have not been set If no ID data are set after the ID number is changed, the message "NO ID DATA" flashes on the screen and LCD display for a few seconds after the power is turned on or during Stop mode. D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 87 8 1 3 http://www.xiaoyu163.com 2 4 7.1.8 TROUBLE SHOOTING Microcomputer Section (CONTROL Assy : IC5501) A QQ 376315150 892498299 Symptom Possible Cause • The unit cannot be turned on. The unit shuts itself off soon after it is turned on. B Check Method The microcomputer was not reset. Check if the level of the terminal XRESET (Pin 8) is "H." If it is not, check the RESET circuit. The AC pulse is not input. Check if the AC pulse is input to Pin 4 of the AC input terminal. If it is not, check the AC pulse generation circuit. The oscillation circuit of the microcomputer does not function. • If the Function is DVD, the voltage of the VDET input (Pin 17) is either 0.5 Vdd* or less or 0.85 Vdd* or more. • The voltage of the PROTECT input (Pin 22) is 0.71 Vdd* or less. • Check that the terminal (Pins 23-25, 29, and 30) for communication with the DVD microcomputer is live, and if it is not, check if the flexible cable is disconnected. • Check if an "H" signal is output to Pin 93 of the XDVDRST terminal. If no operation key has been pressed, check if the voltage at Pins 18 of the KEY input terminal is 5 V. If it is not, check if the operation switch on the line is in failure. * Vdd= Approx. 5V (depending on the unit) ex.) 0.85Vdd= 0.85 × 5 (V) = 4.25 (V) C E www F . x iao y u163. co m XV-DV99 88 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 13942296513 13942296513 All operation keys are disabled. The unit recognizes that an operation key has already been pressed. If the voltage at Pin 17 of the VDET terminal of the microcomputer is either 0.5 Vdd or less or 0.85 Vdd or more, adjust so that it stays between 0.5 and 0.85 Vdd. TEL TEL • DVD does not operate at all. Communication with the DVD • Time is not displayed in LCD display microcomputer has not been established. during DVD function. The microcomputer or the oscillation circuit is broken. Change the microcomputer or the oscillation circuit. 6 http://www.xiaoyu163.com 5 7 8 DVD Section QQ 376315150 892498299 No. Symptoms Possible Defective Points Diagnosis Contents A An opening screen is not Is the level at both IC5501-pin 93 (XDVDRST) and pin 1(DVD ON/OFF) µcom (CONTROL IC5501) displayed on the monitor on the CONTROL Assy "H" ? (The LCD display lights. The Check the voltage of CN901-pin 28 and 29 (VPR+8) on the DVDM mechanism does not work.) DVDM Assy CN901 Assy. 1 Check that the following voltages are output : IC411-pin 3 : 1.8V, IC421-pin 3 : 1.8V and IC431-pin 1 : 5V on the DVDM Assy Each regulator on the DVDM Assy Are resonators (27MHz, 20MHz) on the DVDM Assy oscillating ? Crystal resonator (DVDM Assy X601 and X301) Refer to contents of an FE error displayed on the LCD display. (SRAM defectiveness, I2C communication line defectiveness, etc.) FRONT END IC (DVDM IC301) B TEL TEL • Is a signal input into IC601-pin 132 (CE3) on the DVDM Assy ? (Is a signal fluctuating for several seconds after the power is turned on ?) • BACK END IC (DVDM IC601) → Communication with flash ROM • Flash ROM (DVDM IC603) • Are the signals input into IC602-pin 16 (SMIWE), pin 19 (SMICS0) • 64M SDRAM (DVDM IC602) and pin 38 (SMICLK) on the DVDM Assy ? (Is a signal fluctuating ?) → Communication with flash ROM 13942296513 13942296513 • BACK END IC (DVDM IC601) Is a signal output from IC603-pin 28 (CPU_OE) on the DVDM Assy? (Is a signal fluctuating for several seconds after the power is turned on ?) • Flash ROM (DVDM IC603) µcom (CONTROL IC5501) Is a signal output from IC5501-pin 29 and 30 (SYS_1, 2) on the AF Assy ? (Is a signal fluctuating in the range of 0-5V ?) µcom (CONTROL IC5501) µcom (AF IC5501) – BACK END Are the signals output from IC5501-pin 23, 24 and 25 on the CONTROL IC (DVDM IC601) Assy? (in the range of 0-5V) communication line 2 3 An opening screen is not Check the video signal path between BACK END IC (DVDM IC601) and DVDM Assy displayed on the monitor • Video circuit (The LCD display lights. The video-out terminal • after BACK END IC (IC601) (see the block diagram) mechanism does not work.) A tray cannot be opened. (An opening screen is displayed on the monitor) • Are wires of CN103 on the DVDM Assy disconnected or damaged ? Connector / wire LOADING SW (LOAB S101) • Is a LOAD-DRVC signal reaching ? • Does the voltage of CN105 pin 1 change by pressing the Inside switch BACK END IC (DVDM IC601) Inside switch 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C QQ QQ Is a signal input into IC5501-pin 67 (DVDACK) on the CONTROL Assy ? (Is a signal fluctuating ?) D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 89 8 1 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 No. A 2 Symptoms Possible Defective Points Diagnosis Contents Playback impossible (no focusing) 4 Are the signals output from IC101-pin 34 (F_DRV) and pin 35 (F_RTN) on the DVDM Assy ? FTS Driver IC (DVDM IC101) Does 650-nm LD emit light ? Does a pickup lens move up / down ? Does an actuator spring bend ? Pickup • Are plastic parts damaged? Or is a shaft detached? • Is the turntable detached or tilted? Mechanism section Is flexible cable of CN101 on the DVDM Assy disconnected or damaged Flexible cable / connector ? Is signal output from IC301-pin 33 (FACT) on the DVDM Assy ? (Device control of about 2.6 V is output usually. It is fluctuated by about FRONT END IC (DVDM IC301) ± 100 mV with focus up / down.) Playback impossible (Spindle does not turn) B FTS Driver IC (DVDM IC101) Is there any part detached from the spindle motor? Or Is there any foreign object lodged in it? Mechanism section (Spindle motor) Are wires of CN105 (DVDM Assy) disconnected or damaged ? Is signal output from IC301-pin 44 (SPDL_PDM) on the DVDM Assy ? FRONT END IC (DVDM IC301) 650-nm LD deteriorated. Does 650-nm LD deteriorate ? If the voltage at both ends of R201 on the DVDM Assy is 0.7 V or more, (When playback of a DVD is impossible) the 650-nm LD is definitely deteriorated. Playback impossible (Playback stops) C 780-nm LD deteriorated. Does 780-nm LD deteriorate ? If the voltage at both ends of R211 on the DVDM Assy is 1.5 V or more, (When playback of CD is impossible) the 780-nm LD is definitely deteriorated. 6 Are there scratches or dirt on the disc ? Disc Are there scratches or dirt on the disc ? Disc Is there a problem with the format of the disc? Disc QQ 3763 1515 0 89 2498 299 TEL 13942296513 Picture disturbance during playback (block noise, freeze, other) No sound (Picture is normal) Is signal output from DOUT signal (CN901-pin 21) on the DVDM Assy ? BACK END IC (DVDM IC601) D E www F . x iao y u163. co m XV-DV99 90 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 8 FG output : FTS Driver IC (DVDM IC101) QQ QQ 7 Is there abnormality in FG waveform ? 13942296513 13942296513 Flexible cable / connector TEL TEL 5 Are the signals output from IC101-pin 12 (A3), pin 13 (A2) and pin 14 (A1) on the DVDM Assy ? Is pin 41 fixed LOW and is pin 38 fixed HIGH ? 6 http://www.xiaoyu163.com 5 7 8 7.1.9 DSP TROUBLE SHOOTING QQ 376315150 892498299 • When a sound is not out in the surround mode with the digital signal input. • Suppose C,R parts to be poor contact and that is not damaged. • This shows failure analysis of DSP Assy. Step 1 A Step 2 IC8501-pin 21 Is output signal "L"? IC8901 No Is 5V inputting ? Replace IC8501. Yes No Check CN8003 and other assemblies. Yes KN8102 Is 3.3V outputting ? No B Replace IC8901. Yes Tighten screws. TEL TEL Is the screw is fastened at KN8102 (earth point)? No IC8902 Yes Is 1.8V outputting ? CN8003 No 13942296513 13942296513 Yes Replace IC8902. Yes Is connector inserted tightly ? No Insert it tightly. End Yes No Step 3 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 Is connector inserted tightly ? QQ QQ CN8007 IC8702 Insert it tightly. Yes Pin 3 CN8011 Is connector inserted tightly ? No Do perform 3V→5V conversion for pin 17 ? Insert it tightly. No Replace IC8702. Yes Yes Pin 5 End Do perform 3V→5V conversion for pin 15 ? No C D Replace IC8702. E Yes Pin 7 www Do perform 3V→5V conversion for pin 13 ? No Replace IC8702. x iao y u163. co m Yes A . F XV-DV99 5 6 http://www.xiaoyu163.com 7 91 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 A B Pin 9 Pin 5 Do perform 3V→5V conversion for pin 11 ? No Do perform 5V→3V conversion for pin 15 ? Replace IC8702. Pin 7 Pin 12 Do perform 3V→5V conversion for pin 8 ? No Do perform 5V→3V conversion for pin 13 ? Replace IC8702. Pin 9 Do perform 5V→3V conversion for pin 11 ? Replace IC8702. Pin 12 Do perform 5V→3V conversion for pin 8 ? Yes Pin 14 No Do perform 5V→3V conversion for pin 6 ? Replace IC8702. Yes Replace IC8701. Pin 16 Do perform 5V→3V conversion for pin 4 ? Step 4 IC8701 No Replace IC8701. Yes E Pin 18 Pin 3 www No Yes End No Do perform 5V→3V conversion for pin 2 ? Replace IC8701. No Replace IC8701. x iao y u163. co m Yes Yes End B F Replace IC8701. Yes Pin 18 Do perform 5V→3V conversion for pin 17 ? No . XV-DV99 92 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 Replace IC8702. QQ QQ No TEL 13942296513 Do perform 3V→5V conversion for pin 2 ? Replace IC8701. Yes Pin 16 D No 13942296513 13942296513 No Yes Do perform 3V→5V conversion for pin 4 ? Replace IC8701. TEL TEL Pin 14 C No Yes Yes Do perform 3V→5V conversion for pin 6 ? Replace IC8701. Yes Yes B No 6 http://www.xiaoyu163.com 5 7 8 Step 5 QQ 376315150 892498299 A IC8201 Is SPDIF signal coming? (be different with Function) Check the DVD/CD (pin 7). No Check the other assemblies. (AF Assy or DVDM Assy) No Check the OPTICAL IN line between VIDEO ASSY and DSP ASSY. (Optical Input Jack or Connectors) Yes B TEL TEL Check the OPTICAL IN (pin 48). Yes No Is input signal of PDN (pin 31) "H"? No 13942296513 13942296513 Is MCKO1 (pin 23) outputting it? Check the other assemblies. (periphery of microcomputer on the AF Assy) Yes Yes Do not oscillate of XTO (pin 29)? Yes No Is LRCK (pin 24) outputting it? No Replace IC8201. Replace IC8201. QQ 3763 1515 0 89 2498 299 Yes Is SDTO (pin 25) outputting it? No Replace IC8201. Yes Is BCK (pin 26) outputting it? No C Yes 376315150 892498299 376315150 892498299 TEL 13942296513 No QQ QQ Note: X8201 oscillates only in analog input. Is output signal of INT0 (pin 36) "H"? Replace IC8201. Yes D IC8502-pin2 E Is 20MHz clock outputting it? No Replace IC8502 or X8501. Yes www End . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 93 8 1 2 3 http://www.xiaoyu163.com QQ 376315150 892498299 Step 6 A 4 Step 7 IC8401 IC8501 Pin 21 Pin 4 Does a signal output it? No Does a signal output it? Replace IC8501. No Replace IC8401. Yes Yes Pin 22 Pin 5 B Does a signal output it? No Does a signal output it? Replace IC8501. No Replace IC8401. Yes TEL TEL Yes Pin 23 Pin 6 No Replace IC8501. No Replace IC8401. Yes Pin 24 Yes Pin 7 C No No Replace IC8401. Yes Replace IC8501. Pin 25 Yes 376315150 892498299 End Does a signal output it? No Replace IC8401. Yes D Pin 26 Does a signal output it? No Replace IC8401. Yes Pin 27 Does a signal output it? E No Replace IC8401. Yes Pin 28 Does a signal output it? www F No Replace IC8401. x iao y u163. co m Yes End . XV-DV99 94 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ Does a signal output it? Does a signal output it? 13942296513 13942296513 Does a signal output it? Does a signal output it? 6 http://www.xiaoyu163.com 5 7 8 7.1.10 SEQUENCE AFTER POWER ON QQ 376315150 892498299 Reset Start • It starts when the XRESET terminal (Pin 8) is "H" level. Initialization routine A Microcomputer IC (PDC110B) (CONTROL Assy : IC5501) Microcomputer initialization Model identification • The inputs to Pins 15 and 16 are inspected and the model identification is performed. B No TEL TEL Demonstration mode permission • Whether Demonstration mode is entered or not can be determined by inspecting the backup data. • The default setting is "Demonstration mode OK." Demonstration mode 13942296513 13942296513 Yes Standby setting Main loop processing No Standby 376315150 892498299 376315150 892498299 Demonstration mode ? QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 Yes : Power ON System power supply on DVD microcomputer start-up Relay release Demonstration mode or Normal power ON mode C • The level of the POWER terminal (Pin 91) is "H". • Only in DVD function, the level of the DVD RESET terminal (Pin 93) is "H". • The speaker relay is turned on about four seconds after the power is turned on. • The level at the RELAY ON/OFF terminal (E-VOL IC Pin1,Pin2) are "H." • The system mute is released about four seconds after the power is turned on. The level of the SYSMUTE terminal (Pin 94) is "H". • Muting is not released in the following cases. • When the main volume is 0. • When the digital LINE 1 function input signal is not locked, or when the DSP MUTE terminal (Pin 87) is in error. D E x iao y u163. co m • If no pulse is input to the AC terminal (Pin 4) for about 60 msec, the microcomputer becomes in Memory Backup mode, it will not do any processing. • The unit will recover from Memory Backup mode if a reset command is input to the XRESET terminal (Pin 8). www . F XV-DV99 5 6 http://www.xiaoyu163.com 7 95 8 1 3 http://www.xiaoyu163.com 2 4 QQ 376315150 892498299 [ STANDBY ON TIMING CHART ] A PON2 150 msec PON1 30 msec ON →Standby PON4 1500 PON3 480 msec PON5 1890 PON8 2070 PON7 2040 PON6 2010 KEY In 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200 4500 4800 5100 5400 5700 6000 6300 AMP Control POWER RELAY H (P91• • SYSPOW) L SYSTEM MUTE H (P94• •XSYSMUTE) L MAIN VOL SET (P95,P96, P97) H L CENTER MUTE (VOL IC Exp. Port) H L FR/SW/C RELAY (VOL IC Exp. Port) REAR RELAY (VOL IC Exp. Port) HP VOL SET (P83,P96, P97) B HP MUTE (P31 • • XHPMUTE) send VOL data set H L send VOL=0 data for IC initialization set SEND demand at DSP side (data is VOL=0) set SEND demand at DSP side (data is VOL=0) set SEND demand at DSP side (data is VOL=0) send VOL data set MUTE ON until this point when HP not exist. Same timing with SYSTEM MUTE when exist H L H L DIGITAL INPUT SEL (P59 • • DIGSEL) H L INPUT SELECT SET (P71,P74, P75) DVD-A & SACD SEL (P70 • • AUDIOSELA) DIMMER CONTROL (P47,P48) H L MUTE ON until this point when HP exist It may be after this point as it actualy makes OR with DSP MUTE. It may be after this point as it actualy makes OR with DSP MUTE. H L 13942296513 13942296513 H L H L H L Start tranfering normal display data Start transfering set data to LCD H driver L DVD Control H L DVD VIDEO MUTE (P68 • • XVMUTE) H L SYSTEM BUS (P23,24,25,29,30,67) H L QQ 3763 1515 0 89 2498 299 TEL 13942296513 H L Communication start DSP Control DIR/CODEC RESET H L (P78 • • DIRRST) DIR/CODEC Communi. H L (P79,80) XTL0 (to DIR H L (P76 • • XTL0) DSP RESET H (P85 • • XDSPRST) L transfer set data Communication start DSP Control Communi. H L (P26,27,28) DSP MUTE (P87 • • XDSPMUTE) H L TUNER Control Communication start *Not cancel MUTE when the intialization communication has not finished according to the DSP hardware state. transfer reset data TUNER Control Communi. H L (P57,61,62) TX MUTE H L (P63 • • TXMUTE) RDS POWER H (P64 • • XRDSPOW) L set initial data of the port OTHERS Other Output Port E Communication start H each H/L following L H L H L H L www F . x iao y u163. co m XV-DV99 96 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 DVD POWER (P1 • • DVD ON/OFF) DVD RESET (P93 • • XDVDRST) QQ QQ D set SEND demand at DSP side (data is VOL=0) H L H L LCD SET (P49,50,51) set SEND demand at DSP side (data is VOL=0) H L TV(SCART)MUTE (P92 • • XTVMUTE) LINE1/LINE2/TV ATT (P41,P42) DVD-A -6dB ATT (P90 • • DVD6dBATT) LCD Control set SEND demand at DSP side (data is VOL=0) TEL TEL C REC MUTE (P32 • • XRECMUTE) send VOL=0 data for IC initialization 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 [ STANDBY ON SEQUENCE ] Set Time from Former Step Function SY_PON0 Passing Time 0 msec Start the POWER ON Each Initial Setting 1 30 msec Each Initial Setting 2 • SYSTEM POWER ON (Pin No.91 : L) • Set the One-Shot Display of " WELCOME " (display time : 3.5 sec) SY_PON2 + 120 msec 150 msec Each Initial Setting 3 + 330 msec QQ 3763 1515 0 89 2498 299 480 msec Each Initial Setting 4 • Start transfering to the LCD driver if the remote control port data is High. • Set the DIGITAL INPUT (Pin No.59) • Set the INPUT FUNCTION (Selector : BU4051) (Pin No.71,74,75) • Start the BUS communication SY_PON4 + 1020 msec 1500 msec Each Initial Setting 4 SY_PON5 + 390 msec 1890 msec Each Initial Setting 5 SY_PON6 + 120 msec 2010 msec Each Initial Setting 6 SY_PON7 + 30 msec 2040 msec Each Initial Setting 7 376315150 892498299 376315150 892498299 TEL 13942296513 SY_PON3 www + 30 msec . 2070 msec POWER ON Finished x iao y u163. co m F XV-DV99 5 6 D E • Clear the MASK FLAG of all keys. • Clear the MASK FLAG of normal key. • POWER Lines MUTE OFF (SYSTEM MUTE REQUEST) SY_PON8 C QQ QQ • Set +5V ON (the Power is stabilized) FLAG • Transfer the initial data to the MAIN VOLUME IC. • Transfer the initial data to the HEADPHONE IC. 13942296513 13942296513 + 30 msec B TEL TEL • Set the MASK FLAG of all keys • Set the MASK FLAG of normal key • POWER Lines MUTE ON (SYSYTEM MUTE REQUEST) • MUTING FLAG CLEAR (SYSTEM MUTE REQUEST) • VOLUME Lines MUTE REQUEST CLEAR (SYSTEM MUTE REQUEST) • DSP MUTE REQUEST CLEAR(SYSTEM MUTE REQUEST) • AMP Lines MUTE REQUEST CLEAR (SYSTEM MUTE REQUEST) • TUNER MUTE REQUEST CLEAR (SYSTEM MUTE REQUEST) • EMERGENCY POWER OFF FLAG CLEAR • LCD Driver STAND-BY • Set the TIMER for canceling the SP-Relay (5 sec) • Set the TIMER for starting the PROTECT Process (1.5 sec) • PROTECT FLAG CLEAR • REC MUTE ON (Pin No.32 : L) • HEADPHONE MUTE ON (Pin No.31 : L) SY_PON1 A Detail about the Control http://www.xiaoyu163.com 7 97 8 1 3 http://www.xiaoyu163.com 2 4 QQ 376315150 892498299 [ STANDBY OFF TIMING CHART ] A POFF2 150 msec POFF1 30 msec ON →Standby POFF4 1500 POFF3 480 msec POFF6 1920 POFF5 1890 KEY In 7800 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 4200 4500 4800 5100 • • • • • • • • 6900 7200 7500 AMP Control POWER RELAY H (P91 • • SYSPOW) L SYSTEM MUTE H (P94 • • XSYSMUTE) L MAIN VOL SET (P95,P96,P97) H L Set Send Demand at DSP side. (data is VOL=0) CENTER MUTE H (VOL IC Expand Port) L B H L HP VOL SETTING (P93,p96,p97) H L TV(SCART) MUTE H (P92 • • XTVMUTE) L LINE1/LINE2/TV ATT (P41,P42) H L DVD-A -6dB ATT H (P90 • • DVD 6dBATT) L DIGITAL INPUT SEL H (P59 • • DIGSEL) L INPUT SELECT SET H (P71,P75,P75) L DVD-A & SACD SEL H (P70 • • AUDIOSELA) L DIMMER CONTROL H L (P47,P48) Hold the previous data for 5 seconds after this point (after POFF6) LCD Control H L Hold the communication after this point (after POFF6) DVD Control DVD VIDEO MUTE (P68 • • XVMUTE) H L H SYSTEM BUS (P23,24,25,29,30,67) L It becomes Low according to the DVD module side state somewhere from this point to 7.5 seconds after. It becomes Low according to the DVD module side state somewhere from this point to 7.5 seconds after. QQ 3763 1515 0 89 2498 299 It becomes Low according to the DVD module side state somewhere from this point to 7.5 seconds after. Continue the commnunication Stop the commnunication at POFF5 DSP Control DIR/CODEC RESET H (P78 • • DIRRST) L DIR/CODEC H (P79,80) L XTL0 (to DIR) (P76 • • XTL0) Stop the commnunication at POFF0 H L DSP RESET H (P85 • • XDSPRST) L DSP Control Commun.H (P26,27,28) L Stop the commnunication at POFF0 DSP MUTE H (P87 • • XDSPMUTE) L TUNER Control TUNER Control Commun.H (P57,61,62,66) L TX MUTE H (P63 • • TXMUTE) L State able to communicate Stop the commnunication at POFF6 Hold the previous data after POFF0 OTHERS Other OUTPUT PORT H L H L H L H L www F . x iao y u163. co m XV-DV99 98 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 DVD POWER H (P1 • • DVD ON/OFF) L DVD RESET H (P93 • • XDVDRST) L QQ QQ LCD SETTING (P49,50,51) RDS POWER H (P64 • • RDSPOW) L E Set Send Demand at DSP side. (data is VOL=0) HP MUTE H (P31 • • XHPMUTE) L REC MUTE H (P32 • • XRECMUTE)L 13942296513 13942296513 D H L REAR RELAY (VOL IC Expand Port) TEL TEL C FR/SW/C RELAY (VOL IC Expand Port) 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 [ STANDBY OFF SEQUENCE ] Set Time from Former Step Function SY_POFF0 Passing Time 0 msec Start the POWER OFF Each Initial Setting 1 30 msec Each Initial Setting 2 • If it is not the Emergency POWER OFF, Set the Admission FLAG of the SP-Realy OFF Check if the DVD is POWER OFF OK Each Initial Setting 3 150 msec SY_POFF3 + 330 msec 480 msec Each Initial Setting 4 SY_POFF4 + 1020 msec 1500 msec Each Initial Setting 4 SY_POFF5 + 390 msec 1890 msec Each Initial Setting 5 TEL 13942296513 QQ 3763 1515 0 89 2498 299 376315150 892498299 376315150 892498299 + 120 msec • Clear 5V ON (the Power is stabilized) FLAG • SYSTEM POWER OFF (Pin No.91 : L) • DVD DEBUG MODE CLEAR • Finished the BUS communication. SY_POFF6 www + 30 msec 1920 msec POWER OFF Finished (passes every loop in the POWER OFF) • Clear the MASK FLAG of all keys. • Hold to set the MASK FLAG of normal key • Clear the Emergency POWER OFF FLAG • Clear the Admission FLAG of SP-Relay OFF • POWER Lines MUTE OFF (SYSTEM MUTE REQUEST) • Clear the LINE TEST MODE FLAG • REC MODE OFF • PORT Process in the POWER OFF • Only when the 5 sec after point after the POWER OFF, REC MUTE OFF (Pin No. 32 : H) HEADPHONE MUTE OFF (Pin No.31 : H) TV MUTE OFF (Pin No.92 : H) Set the DIMMER PORT OFF (Pin No. 47,48 : H) . 6 http://www.xiaoyu163.com 7 D E x iao y u163. co m F XV-DV99 5 C QQ QQ SY_POFF2 13942296513 13942296513 + 30 msec B TEL TEL • Set the MASK FLAG of all keys • Set the MASK FLAG of normal key • POWER Lines MUTE ON (SYSYTEM MUTE REQUEST) • MUTING FLAG CLEAR (SYSTEM MUTE REQUEST) • Set the transfer demand of the VOLUME DATA to the DSP module. (The DSP module controls the MAIN VOLUME.) • Set the Counter for not coming DVD POWER OFF information.(20sec) • MENU clear • Clear the demand of One-Shot Display. • Clear the RAM relative to PROTECT if in SERVICE TEST MODE. • Force to set the each data to the Factory Setting state in the TEST MODE except the SERVICE TEST MODE. • Clear the TEST MODE FLAG except the LINE TEST MODE • Clear the RAM FLAG relative to the TIMER. • DEMO CLEAR SY_POFF1 A Detail about the Control 99 8 1 3 http://www.xiaoyu163.com 2 4 7.1.11 SINGLE OPERATION METHOD QQ 376315150 892498299 • Please connect DISPLAY UNIT (AXX7163) in order to use Remote Control Unit. Service TEST mode TEST MODE : ON Turn off power switch of DC power supply. TEST MODE Connect each power supply firmly stabilizing as shown in the figure below and shortcircuit the 3 GND points. B VE+5 Turn on power switch of DC power supply. TEST MODE TEST CONTROL Assy H CONTROL ASSY TEL TEL SIDE A SIDE A CN5604 UTEST L5601 R5607 X5501 R5585 R5531 R5532 R5541 R5540 R5533 R5534 R5535 81 81 30 30 C5508 11 R5205 C8529 C8535 D8523 D8521 GNDM For service short point R8406 R8511 R8408 4 1 C8513 5 R8515 1 C8533 D8517 D8519 R8513 C8515 IC8503 R8517 4 R8403 R8404 R8409 C8517 C8523 5 R8529 R8525 C8534 D8518 C5206 L5202 Q5201 L5203 R5201 Q5202 R8407 C8531 C8536 D8524 D8522 D8520 R5206 Q8401 IC8505 8 C8530 IC8506 Q8402 Q8403 R8405 8 C8503 R8503 GNDA C8527 R8523 R8521 1 4 8 R8528 C8526 4 1 5 8 R8526 5 4 5 C8502 1 R8508 C8532 R8530 UN+56 L5201 R5202 D1002 C5576 IC8502 8 R8504 C8504 R8522 C1002 R5204 D1001 C1001 C1010 D1006 C1007 C8538 R8422 C8412 R8502 R8510 R8506 C8541 C8539 C5607 123.0mm C8537 5 Knife Line C8404 8 C5572 For service point short IC8501 C5203 C8521 D8509 D8515 D8511 D8513 C8524 D8514 D8516 20 20 x iao y u163. co m C5575 C5204 L5204 L5205 D5205 D5202 D5201 D5203 L5571 CN5603 C5578 . 7 R8524 C8528 OUT IN 1 GNDD R8527 C8525 C5606 C8402 IC8401 C8410 shortcircuit GND (GNDA, GNDD, GNDM) C8401 8 R8519 4 www F R5554 R5555 R5557 R5559 R5561 R5563 14 GND Turn off power switch of DC power supply. R5558 R5560 R5547 R5549 R5551 R5545 R5544 R5546 R5548 R5550 R5552 R5553 PRODUCTION CODE IC8402 VPR+8 IC1001 TEST MODE : STOP DIRRST 5.DIRERR XTLO DIGSEL XTVMUTE 1.AUDIOSELA C8403 C8411 C8409 R8421 IC1004 E R5562 R5564 R5565 C5507 R5556 1 DC +10V power supply 15.DSPDI DSPDO DSPCK DSPRST DSPSS 10.DSPHREQ DSPMODE DIRDO DIRCS R5566 CN5502 R5542 0MUTE MUTEOUT DSPMUTE DECMUTE R5570 C8519 51 R5599 R5573 R5571 R5572 R8509 R8505 R8501 51 R8507 C8501 80 80 D VA-12 VPR+12 D5206 CN5602 CN5201 1 1 7 1 1 7 XV-DV99 100 1 2 3 http://www.xiaoyu163.com 4 DC +14V power supply 376315150 892498299 R5574 50 R5536 R5537 R5538 R5539 VD+5 R5584 VPR+8 R5583 R5582 VPR+8 25.GNDRTN R5581 GNDRTN R5580 R5579 OPTIN GNDU R5578 GNDU R5577 20.DVDMUTE R5576 R5575 QQ 3763 1515 0 89 2498 299 50 376315150 892498299 TEL 13942296513 DC –14V power supply 30.VA-12 XPROTECT QQ QQ R5529 7 7 CN5501 CE3 100 100 31 31 R5530 1 1 1 R5568 R5569 C5510 R5526 IC5501 30 30 E+5 1 R5528 TEST B GNDM VPR+8 C5603 C5604 R5505 R5504 R5502 R5501 R5506 R5515 R5507 DOUT GNDD GNDD GNDM 25.GNDM VPR+8M VPR+8M VPR+8 VPR+8 30.VDVD+12 15.SYSCS2 SYSCS1 XDVDRST DVDPOW GNDD 20.GNDD ACK R5517 R5516 C5605 R5520 30 30 R5519 R5518 C CN5601 5 Service mode short point R5522 R5521 R5525 R5524 R5523 VE+56 13 RTS RXD TXD 5.XVMUTE DVDMUTE ZERO VDET GNDD 10.GNDD 1.CTS KN1001 A 5 DC +6V power supply 13 MDATA SDATA SCLK 11 CN3902 13942296513 13942296513 11 1 1 A 6 http://www.xiaoyu163.com 5 7 8 7.1.12 PROTECTION CIRCUIT QQ 376315150 892498299 If the TIMER LED on the front panel flashes, check the protection circuit. Note: If the protection circuit activates, the unit will not recover for 60 seconds even if the AC power cord is disconnected then reconnected. If you activate Service Test mode, the protection circuit becomes invalid, which makes diagnosis easy. (To activate Service Test mode, while connecting STEST port (IC5501 Pin43) to "+5V", connect AC power cord.) There are three types of operations for the protection circuit, which are indicated on the FL display when Service Test mode is entered: A PRTCT WNG: The unit was shut down because of an abnormality in the AMP system. (The PROTECT line operates at the MID level.) PRTCT ERR: The unit was shut down because of a failure in the AMP system. (The PROTECT line operates at the LO level.) DVD PRTECT: The unit was shut down because of a failure in the DVD system. (The VDET line operates at the HI or LO level.) Conditions for the protect circuit operations Voltage PROTECT FL display in Service Test mode >3.55V Normal MID level 1.8V - 3.5V The unit is shut down because of an abnormality. B PRTCT WNG LO level <1.8V The unit is shut down because of a failure. PRTCT ERR HI level >4.25V The unit is shut down because of a failure. DVD PRTECT MID level 3.3V Normal LO level <2.5V The unit is shut down because of an abnormality. TEL TEL VDET Conditions HI level DVD PRTECT 13942296513 13942296513 1 When the Speaker terminal becomes overloaded [Sub Woofer side] R3353 1.8k B R3355 33k D3353 R3351 0.1 [Sub Woofer side] D A C POWER Assy 6CH AMP Assy VD+5 Front L ch Q3601 R108 27k GND FL to XPROTECT +5V D3351 R3601 4.7k Q3603 R5527 270k C Q3602 C3605 0.1 H B 376315150 892498299 376315150 892498299 TEL Protection 13942296513 3763WNG 15error 15 0 89 2498 299 QQa PRTCT circuit that activates against C QQ QQ The possible failures for each error message are as follows: PRTCT WNG: • The Speaker terminal became overloaded because of short-circuit. (See 1.) PRTCT ERR: • The main power supply became LO level because of short-circuit or disconnection of connectors. (See 2.) • Disconnection of the FAN connector or interruption of rotation of the fan (See 3.) • DC was generated at the output because of a failure in the AMP system, etc. (See 4.) • Abnormal temperature was detected by the thermistor. (See 5.) DVD PRTECT: • An error was generated in the main power supply inside the DVDM. (See 6.) D CONTROL Assy E E In Normal mode, the speaker (6 ohms) is connected between the FL and GND FL points. Because the voltage at Point A is higher than that at Point B, Q3601 does not operate. If the resistance between the FL and GND FL points becomes 1.83 ohms or less, Q3601 begins to operate, Q3602 is turned on, Q3603 (E, C, and B)is turned on, and the level of XPROTECT becomes MID. → The microcomputer detects the XPROTECT level and shuts the power to the unit off. www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 101 8 1 3 http://www.xiaoyu163.com 2 4 Protection circuit that activates against a PRTCT ERR error A QQ 376315150 892498299 2 When the main power supply becomes LO level because of short-circuit or disconnection of connectors 2 -1 Short-circuit-detection circuit for the amplifier power circuit (VH+[VP+15], VD+5, -12 V [VA-12]) Circuit for shutting the power off when VP+15, VD+5, or VA-12 is short-circuited to ground (GND) [Sub Woofer side] C 6CH AMP Assy VD+5 B E B C R101 (R104) 1k B + C101 (C102) 1/50 B R102 (R105) 10k C2 Q102_2/2 (Q104_2/2) VPF+15 R3654 1.8k R108 27k C2 Q3651_2/2 RN1901 C B2 B2 D3658 UDZS7.5B B + E2 E A Q3652 DTA124TK R3657 33(1/4W) R3658 2.2k FAN+ Q3651_1/2 C3652 D3657 47/50 1SS355 RN1901 C2 R103 (R106) 10k A VD+5 to XPROTECT (µ-com) Q101_2/2 (Q103_2/2) B2 6CH AMP Assy E2 R109 820 R3655 8.2k D105 (D106) VH– * ( )means the wiring No. of VP+15 line. (VA–12) • In Normal mode, as Q101 (Q103) (E2, B2, C2) and Q102 (Q104) (E2, B2, C2) are on, the voltage at Point A is about 5 V. The voltage at Point B is therefore about the same. As Q101 (Q103) (E, C, B) is off, Q102 (Q104) (E, C, B) is also off. FAN– D3651-D3654 1SS133×4 R3656 22k V-12F If no fan is connected between FAN+ and FAN-, or when the fan cannot rotate because of a foreign object caught in the blades, the BASE of Q3652 becomes OPEN, and Q3652 and Q3651-1/2 (E, C, B) are turned off. Then Q3651-2/2 (E2, B2, C2) is turned on, and the level of XPROTECT becomes low. → The microcomputer detects the XPROTECT level and shuts the power to the unit off. When FAN+ and FAN- are short-circuited, the electric potential at Point A becomes higher than GND level by the addition of the values at D3656 and D3657. As this value is lower than that at D3658, Q3651 (E, C, B) is turned off, Q3651 (E2, B2, C2) is turned on, and the level of XPROTECT becomes low. QQ 3763 1515 0 89 2498 299 (3) When VD+5 is short-circuited The level of the XPROTECT line becomes low. The microcomputer detects the XPROTECT level and shuts the power to the unit off. 2 -2 Short-circuit-detection circuit for the DVD power supply (VP+8) [Sub Woofer side] C 6CH AMP Assy XPROTECT E VD+5 VP+8 R108 27k D104 1SS355 Q106 DTC124EUA Q107 DTA124EUA TUNER As the TUNER line is fixed to GND level, Q107 is always on. If the level at VP+8 falls to GND level because of short-circuit, etc., Q106 is turned on, and the level of the XPROTECT line becomes low. ← The microcomputer detects the XPROTECT level and shuts the power to the unit off. www F . x iao y u163. co m XV-DV99 102 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 (2) When VH-(VA-12) is short-circuited As the electric potential of VE at Q102 (Q104) (E2, C2, B2) becomes the same as that at VB, Q102 (Q104) (E2, C2, B2) is turned off. Following this, Q101 (Q103) (E2, B2, C2) is turned off, which changes the voltage at Points A and B to a value other than 5 V. Therefore, Q101 (Q103) (E, C, B) then Q102 (Q104) (E, C, B) are turned on, the level of XPROTECT becomes low. Q3654 2SD2144S QQ QQ (1) When VH+(VP+15) is short-circuited to GND As the voltage at Point B becomes almost ground potential, and Q101 (Q103) (E, C, B) then Q102 (Q104) (E, C, B) are turned on, the level of XPROTECT becomes low. → The microcomputer detects the XPROTECT level and shuts the power to the unit off. D3655 1SS133 13942296513 13942296513 D R108 27k to XPROTECT C (µ-com) Q102_1/2 (Q104_1/2) D101 (D102) E Q101_1/2 (Q103_1/2) E2 [Sub Woofer side] C TEL TEL C VH+ (VP+15) VD+5 3 When the FAN connector is disconnected or when rotation of the fan is interrupted 6 http://www.xiaoyu163.com 5 4 When DC is generated at the output because of a failure in the AMP system, etc. 7 8 5 When abnormally high temperature is detected by the thermistor QQ 376315150 892498299 [Sub Woofer side] D POWER Assy [Sub Woofer side] C 6CH AMP Assy Front L ch (SW, SL) Front R ch (C, SR) +5V TH111 NCP18WF104J03RB to XPROTECT E A B R3603 10k + C3632 100/10 XPROTECT C Q3605 R3358 (R3626) (R3458) 10k IC81 NJM7805FA R108 27k Q3606 [Sub Woofer side] C 6CH AMP Assy VD+5 VD+5 R3357 (R3625) (R3457) 18k Q3604 R111 1k Q3607 • In Normal mode, both Q3605 and Q3604 are off. Q111 2SC4081 R112 1k The voltage at Point A becomes the divided voltage of TH111 and R111//R112 (combined resistance of parallel-connected resistors R111 and R112.) In Normal mode, the resistance at TH111 is much higher than R111//R112, and Q111 is off. (Note that the resistance at TH111 becomes lower as the temperature increases.) If the solder temperature at IC81 increases abnormally, the temperature at TH111 (thermistor) mounted closest to the land of IC81 increases accordingly, and the resistance at TH111 decreases. When the temperature at TH111 reaches 90-110_C (varying according to conditions,) the voltage at Point (A) becomes high enough to turn Q111 on, and the level of the XPROTECT line becomes low. The microcomputer detects the XPROTECT level and shuts the power to the unit off. C QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 B 13942296513 13942296513 (2) When negative (-) DC voltage was generated at the SP terminal Q3604 is turned on, and XPROTECT is activated. R113 220 TEL TEL (1) When positive (+) DC voltage is generated at the SP terminal When positive (+) DC voltage is generated at the L or R channel, and VB of Q3605 becomes higher than that at the operation point, Q3606 (E, C, B) is turned on, and the level of XPROTECT becomes low. → The microcomputer detects the XPROTECT level and shuts the power to the unit off. A 5 -1 IC81 abnormal temperature detection circuit D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 103 8 1 3 http://www.xiaoyu163.com 2 4 Protection circuit that activates against a DVD PRTECT error QQ 376315150 892498299 B R929 10k V+12 R923 47k V+12 R925 0 R928 4.7k Q921 Q923 Q924 R930 10k R924 10k D924 D923 D922 Q922 V+3R3 B V+12 V+6 R922 470 R934 10k R921 470 R5515 220 8 8 Q925 Q926 D921 UDZS4.7B R5514 1M C5580 0.01 C921 0.1 R931 47k VDET 17 µcom TEL TEL V+5 R933 15k D926 D927 CONTROL Assy CN5604 R927 V+5 47k V+12 H DVDM Assy VPR+8 CN901 A 6 The DVDM monitors the voltage of the main power supply by VDET signals. In Normal mode, the VDET signal is at the MID level (3.3 V). In the following conditions, the VDET signal level becomes L or H, and the microcomputer is notified of this abnormality. IC5501 PDC110B Items to be detected by VDET (1) When the power voltages inside the DVDM become abnormal, as shown in the table below C Status Power Voltage Q921 D921 D922 Q926 Q925 off off off off off off off off Mid (on) (on) (on) (off) off on off off L off off off off off off on on L <5.2V − off off off off − on on L >12.6V on − on on on − off off H <3V − − − − − − on on L TEL 13942296513 >15.5V When an abnormality is generat V+6 V+5 D V+3R3 QQ 3763 1515 0 89 2498 299 <3.6V − off off off off − on on L >6.6V − on on on on − off off H <2.5V − − − − − − − − L >4.25V − − − − (on) − − − H (2) When the VDET signal to the microcomputer is interrupted because of defective soldering of the 30-pin connector or incomplete insertion of FFC → The VDET level is lowered by the pull-down resistor (1 Mohms) on the side of the microcomputer. E www F . x iao y u163. co m XV-DV99 104 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 Q922 QQ QQ 376315150 892498299 Q924 <1V VPR+8 VDET voltage Q923 In Normal mode VDVD+12 Operation 13942296513 13942296513 D925 6 http://www.xiaoyu163.com 5 7 8 7.1.13 DISASSEMBLY QQ 376315150 892498299 Note: For performing the diagnosis shown below, the following jig cable for service are required: • GGD1222 A This unit is a system component, so it does not operate independently. Refer to section "7.1.11 SINGLE OPERATION METHOD" to work it independently. 1 Top panel, Top plate 1 2 VIDEO Assy 1 2 Remove the two screws. Rear panel 1 1 Remove the top panel and top plate. (See Step ¥.) Remove the eight screws. 2 VIDEO Assy DSP Assy B TEL TEL 2 13942296513 13942296513 2 Remove the top panel by removing the nine hooks. 2 Top panel 2 2 2 2 2 2 ×3 2 Rear panel 2 2 3 Stand the VIDEO Assy. 3 VIDEO Assy DSP Assy Remove the top plate by removing the five screws. 3 Top plate 3 3 376315150 892498299 376315150 892498299 2 3 QQ QQ Q2 Q 3763 1515 0 89 2498 299 2 2 TEL 13942296513 C D 3 3 E 3 www . x iao y u163. co m Diagnosis F XV-DV99 5 6 http://www.xiaoyu163.com 7 105 8 1 3 http://www.xiaoyu163.com 2 3 CONTROL Assy A 4 4 DVDM Assy QQ 376315150 892498299 1 2 1 2 3 4 Remove the top panel and top plate. (See Step ¥.) Remove the ten screws. 2 2 ×2 Remove the top panel and top plate. (See Step ¥.) Remove the six screws. Remove the three flexible cables. Remove the DVD mechanism section with front section. 2 DVD mechanism section 2 2 3 ×2 B 2 4 TEL TEL 2 3 3 2 2 2 C 2 2 Front section 2 Stand the CONTROL Assy. CONTROL Assy 3 VIDEO Assy DSP Assy FM/AM TUNER Module QQ 3763 1515 0 89 2498 299 5 Remove the two screws. TX TRADE Assy D 5 DVDM Assy LOADING MECHA. Assy 5 E NOTE: When this FFC cable is off from the connector and the power is turned on, the parts below on the DVDM ASSY may be destroyed. Be sure to take care when servicing. Front section IC851 DSD1791DBR IC861, IC871 DSD1702EG www Bottom view x iao y u163. co m Diagnosis F . XV-DV99 106 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 QQ QQ 3 2 13942296513 13942296513 Rear panel 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 6 7 8 9 Release the jumper wire. Connect the jig cable. A Arrange the DVDM Assy as shown in the photo below. Insert the insulation sheet. DVDM Assy 7 LOADING MECHA. Assy Jig cable (GGD1222) 9 Insulation Sheet B 6 6 6 TEL TEL Rear view DVDM Assy PCB Location TX TRADE Assy QQ 3763 15C15 0 89H2498 299 VIDEO Assy CONTROL Assy DSP Assy D E DSP TRADE Assy B DVDM Assy O KEY LTOP Assy I 376315150 892498299 376315150 892498299 TEL 13942296513 FM/AM TUNER Module C QQ QQ F G 13942296513 13942296513 LOADING MECHA. Assy Diagnosis D HP Assy E LOADING MECHA. Assy N www KEY L Assy L x iao y u163. co m KEY RTOP Assy . M KEY R Assy F XV-DV99 5 6 http://www.xiaoyu163.com 7 107 8 1 2 3 http://www.xiaoyu163.com 4 5 Tray panel A QQ 376315150 892498299 Firstly remove the tray panel to remove the mecha. section. In this section, explain a disassembly of the tray panel. 1 2 3 4 5 6 How to open the tray when the power cannot be on Insert a screwdriver (small) into the slit located at the bottom of the unit, and slide the projection of the drive gear in the LOADING MECHA. Assy in the direction of the arrow, as indicated in the photo. If the tray pops out a little, fully pull it out by a hand. Remove the top panel and top plate. (See Step ¥.) Press the STANDBY/ON button to turn on the power. Press the 0 (OPEN/CLOSE) button to open the tray. Remove the tray panel. Press the 0 (OPEN/CLOSE) button to close the tray. Press the STANDBY/ON button to turn off the power. Slit B TEL TEL 2 6 C 3 5 3 5 Screwdriver (small) Tray panel QQ 3763 1515 0 89 2498 299 Screwdriver (small) Projection D Drive gear LOADING MECHA. Assy E www F . x iao y u163. co m XV-DV99 108 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 Disassembly of after step 7, refer to "Step [ DVDM Assy" . QQ QQ 7 Tray 13942296513 13942296513 4 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 Removing the TRAVERSE MECHA. Assy-S and Pickup Assy-S A 1 LOADING MECHA. Assy 1 2 3 Remove the bridge by removing the one screw. Rear View Pull out the tray, then remove it by pressing the hook. Short-circuit two points of C and D by soldering. Note: After replacement, connect the flexible cable, then remove the soldered joint (open). 4 CD Hook Remove the four connectors from the LOADING MECHA. Assy. 2 -1 3 1 B -1 TEL TEL Bridge -2 13942296513 13942296513 1 QQ QQ 376315150 892498299 376315150 892498299 QQ 37623 1515 0 89 2498 299 TEL 13942296513 Tray -2 Drive cam Note when reinserting the Tray C Pin When reinserting the Tray, first align the triangle printed on the Loading base and the pin of the Drive cam, then insert the Tray. D E Front Side Loading base www . Triangle x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 109 8 1 2 3 http://www.xiaoyu163.com 4 2 TRAVERSE MECHA. Assy-S QQ 376315150 892498299 1 A Flexible cable for the spindle motor Dislodge the flexible cables from their packaged placement. Front Side 1 B 13942296513 13942296513 1 C QQ 3763 1515 0 89 2498 299 Remove the four hooks. Bottom View TRAVERSE MECHA. Assy-S 2 Remove the TRAVERSE MECHA. Assy-S. 3 E www F x iao y u163. co m 2 . ×2 XV-DV99 110 1 2 3 http://www.xiaoyu163.com 4 ×2 376315150 892498299 376315150 892498299 2 3 Flexible cable for the stepping motor QQ QQ D Flexible cable for the pickup TEL 13942296513 TEL TEL 1 6 http://www.xiaoyu163.com 5 7 8 3 Pickup Assy-S QQ 376315150 892498299 Front Side Note: The Pickup Assy-S can be removed without removing the TRAVERSE MECHA. Assy-S. (shown as Step ø.) 1 Dislodge the flexible cable for the pickup from its packaged placement. 2 Remove the flexible cable for the pickup. A 1 B TEL TEL 2 13942296513 13942296513 1 Flexible cable for the pickup 3 4 Remove the two skew screws and two skew springs. QQ 3763 1515 03 89 23498 299 Skew screw Skew screw Remove the Pickup Assy-S. Pickup Assy-S Skew spring Skew spring 4 376315150 892498299 376315150 892498299 TEL 13942296513 QQ QQ Bottom View C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 111 8 1 5 A 3 http://www.xiaoyu163.com 2 4 QQ 376315150 892498299 Remove the two screws. Pickup Assy-S Note: The screws are secured with epoxy. Make sure to apply epoxy after reattaching the screws. Leaf Spring 5 Joint Spring Silicone Adhesive GEM1037 B TEL TEL 5 Silicone Adhesive GEM1037 C Arrangement of the flexible cable for the stepping motor Front Side : Conductive surface Front Side 376315150 892498299 : Conductive surface D Hook Hook E www Bottom View F . x iao y u163. co m Bottom View XV-DV99 112 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ Arrangement of the flexible cable for the spindle motor 13942296513 13942296513 Joint 03 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 Arrangement of the flexible cable for the pickup : Conductive surface A Note: Be sure to move the Pickup Assy-S to the innermost perimeter. 1 Fold the flexible cable inward at the position of the reference line. 2 3 Attach the flexible cable of the pickup to the connector. 7 Pass the flexible cable below the hook, and fold it back. Make sure that the cable does not have any slack Fold the flexible cable of the pickup with the backing inward. 7 Reference line 1 3 2 B Hook TEL TEL Backing 97mm ± 2mm 8 4 Fold the flexible cable back at the hook. Pass the flexible cable through the hook not allowing any slack. Make sure that the cable is loose Hook 5 6 Fold the flexible cable as indicated in the photo. 9 Hook the part folded in Step 1 to the hook. 5 Fold the flexible cable along the hook. 376315150 892498299 376315150 892498299 Reference line Pass the cable below the hook . Reference line Hook E Hook x iao y u163. co m F XV-DV99 5 D 6 9 www C QQ QQ QQ 3763 1515 0 89 24988299 TEL 13942296513 4 Hook Make sure there is no slack in the cable 13942296513 13942296513 Bottom View Front Side 6 http://www.xiaoyu163.com 7 113 8 1 2 3 http://www.xiaoyu163.com 4 7.2 IC QQ 376315150 892498299 • The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams. A • List of IC STM6316ATXXZ, STM5588CVB, M63108FP, SAA7893HL/C2, PDC110B 7 STM6316ATXXZ (DVDM ASSY : IC301) • FRONT END IC ¶ Block Diagram B TEL TEL 13942296513 13942296513 C E www F . x iao y u163. co m XV-DV99 114 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 A ¶ Pin Function No. 1 PIN name IREF description 12.7kF detail Analog block reference part 2 GNDAI GNDA analog gnd 3 RFIN capacitor RF signal C association input to a demodulation block 4 RFOUT capacitor B1+B2+B3+B4 mixture listing from an analog block 5 VCCA18 1V8A analog 1V8 6 A B1 PU - B1 input GNDMN GNDA analog gnd B B2 PU - B2 input 9 VCC33MN 10 REFD 3V3A analog 3V3 to pick up 2V1 output for PU 1V8A analog 1V8 B4 PU - B4 input 13 VCCA18IS 1V8A analog 1V8 14 C B3 PU - B3 input 3V3A analog 3V3 GNDA analog gnd 17 VCC33SD 3V3A analog 3V3 18 VCC18SD 1V8A analog 1V8 19 GNDSD GNDA analog gnd C PU-3 beam C input A PU-3 beam A input 22 VSHIELDIS GNDA analog gnd 23 VCC18ADC 1V8A analog 1V8 TEL 13942296513 24 GNDADC GNDA analog gnd 25 VSHIELDADC GNDA analog gnd 26 VCC33DAC 3V3A analog 3V3 27 GNDDAC GNDA analog gnd 28 SPINDLE 560ohm(st2) DAC current listing for stepper drive 29 SLEDGE 560ohm(st1) DAC current listing for stepper drive 30 REFEXT 20K1% Reference for DAC 31 REFGND refext analog gnd 32 REFDAC 560ohm1% DAC reference 33 FACT 560ohm1% DAC current listing for focus 34 TACT 560ohm1% DAC current listing for tracking 35 VCC18DAC 1V8A analog 1V8 36 PC0 FG FG pulse input 37 PC1 PS Driver control signal 38 PC2 tray SW1(open) SW input for tray OPEN position 39 PC3 SB Driver control signal 40 PC4 SLD position Inside SW input www . x iao y u163. co m 6 http://www.xiaoyu163.com D E F XV-DV99 5 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 20 F 21 E C QQ QQ 15 VCCA33IS 16 GNDAIS 13942296513 13942296513 11 VCC18MN 12 D B TEL TEL 7 8 7 115 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 No. PIN name description 41 VSS B 42 VDD33 3V3D digital 3V3 43 PC5 780/X650 780nm/650nmLD change control signal 44 PC6 spinde PDM Control PDM listing for spindle drive 45 PC7 opicgain OEIC gain control signal 46 PD7 03PU/X02PU Pull-up settlement 47 VSS GNDD digital gnd 48 VDD18 1V8D digital 1V8 49 PD6 (debug) test 50 PD5 (debug) test (DSPclk) test (DSPdata) test 53 PD2 (DSPstrb1) test 54 PD1 error monitor Terminal for TRKG error monitor (30KHzLPF add need) 55 PD0 tray PDM drive Control PDM signal for tray drive 56 VSS GNDD digital gnd 57 VDD33 3V3D digital 3V3 RS_ERROR BE DATA I/F RS_ERR_EN BE DATA I/F GNDD digital gnd RS_BCLK BE DATA I/F 62 VDD18 1V8D digital 1V8 63 OUT_DVALID RS_DVALID BE DATA I/F 376315150 892498299 E 64 OUT_DATA RS_DATA BE DATA I/F 65 OUT_SYNC RS_ECCBST BE DATA I/F 66 PE5 SCL(DMA) FE routine download input 67 PE4 SDA(DMA) FE routine download input 68 PE3 SCL BE command I/F 69 PE2 SDA BE command I/F 70 PE1 tray SW2(close) SW input for tray CLOSE position 71 PE0 DXXINT FE status propagation signal 72 VSS GNDD digital gnd 73 VDD33 3V3D digital 3V3 74 PF1 10K-pullup Built-in facility setting terminal 75 PF0 10K-pulldown Built-in facility setting terminal 76 VSS GNDD digital gnd 77 VDD18 1V8D digital 1V8 78 PG1 to EMULATOR Built-in facility setting terminal 79 PG0 to EMULATOR Built-in facility setting terminal 80 TEST 10K-pulldown test www F QQ 3763 1515 0 89 2498 299 . x iao y u163. co m XV-DV99 116 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 60 VSS 61 OUT_CLK QQ QQ 58 OUT_ERR 59 OUT_EVALID 13942296513 13942296513 51 PD4 52 PD3 TEL 13942296513 D detail digital gnd TEL TEL C GNDD 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 No. PIN name 81 RESET_N description RESET A detail RESET input 82 VSSADC GNDA analog gnd 83 VDD18ADC 1V8A analog 1V8 84 GNDPLL GNDA analog gnd 85 PLLOFF GNDA analog gnd 86 FREOUT 20MXtal SYSTEMCLK oscillating circuit 87 FREIN 20MXtal SYSTEMCLK oscillating circuit 88 VCC18PLL 1V8A analog 1V8 650nmLD 650nmLD driving signal 780nmLD 780nmLD driving signal TEL TEL 89 LD1 90 LD2 B 3V3A digital 3V3 CD_VR/GND Monitor diodes VR junction terminal for CD 93 LMD1 LMD/LMD1 Monitor voltage junction terminal 94 LMD2 DVD_VR/LMD2 Monitor diodes VR junction terminal for DVD 95 GNDL GNDA analog gnd 96 TST_PM nc tset 97 TST_SLICE nc test 98 TST_ADC nc test SACD_IC RF signal output capacitor Condenser junction terminal for inside reference stability 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C QQ QQ 99 RFSACD 100 VBGFILT 13942296513 13942296513 91 VCCA33 92 TWSEL D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 117 8 1 2 3 http://www.xiaoyu163.com 4 7 STI5588CVB (DVDM ASSY : IC601) QQ 376315150 892498299 • BACK END IC A B TEL STi5588 PQFP 208 (rev F) 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 DAC_PCMOUT1 DAC_PCMOUT2 DAC_PCMCLK DAC_LRCLK SPDIF_OUT SMI_ADR[4] SMI_ADR[5] SMI_ADR[6] SMI_ADR[7] SMI_ADR[8] SMI_ADR[9] VDD1_8 VSS SMI_ADR[3] SMI_ADR[2] SMI_ADR[1] SMI_ADR[0] SMI_ADR[10] SMI_ADR[11] SMI_ADR[12] SMI_ADR[13] SMI_CS[0] SMI_CS[1] SMI_RAS SMI_CAS SMI_WE SMI_DQML SMI_DQMU VDD3_3 SMI_CLKIN VSS SMI_DATA[0] SMI_DATA[1] SMI_DATA[2] SMI_DATA[3] SMI_DATA[4] SMI_DATA[5] SMI_DATA[6] SMI_DATA[7] SMI_DATA[8] SMI_DATA[9] VDD1_8 SMI_CLKOUT VSS SMI_DATA[10] SMI_DATA[11] SMI_DATA[12] SMI_DATA[13] SMI_DATA[14] SMI_DATA[15] PIO5[3] PIO5[4] www F . x iao y u163. co m XV-DV99 118 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 E QQ QQ CPU_DATA[13] CPU_DATA[12] CPU_DATA[11] CPU_DATA[10] CPU_DATA[9] CPU_DATA[8] VSS VDD1_8 CPU_DATA[7] CPU_DATA[6] CPU_DATA[5] CPU_DATA[4] CPU_DATA[3] CPU_DATA[2] CPU_DATA[1] CPU_DATA[0] CPU_CAS1 CPU_CAS0 CPU_RAS1 VSS VDD3_3 CPU_CE[0] CPU_CE[1] CPU_CE[2] CPU_CE[3] CPU_WAIT CPU_RW CPU_BE[1] CPU_BE[0] IRQ[0] IRQ[1] IRQ[2] RESET VSS_PLL VDD_PLL VSS PIX_CLK VDD1_8 CPU_PROCLK CPU_OE PWM0 PWM1 PWM2 TCK TDI TDO TMS TRST VSS VDD3_3 ADC_PCMCLK PIO5[5] QQ 3763 1515 0 89 2498 299 TEL 13942296513 D 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 13942296513 13942296513 C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 TEL PIO2[5] PIO2[6] PIO2[7] VDD3_3 VSS PIO3[0] PIO3[1] PIO3[2] PIO3[3] PIO3[4] PIO3[5] PIO3[6] PIO3[7] VDD1_8 VSS B_DATA B_BCLK B_FLAG B_SYNC PIO5[0] PIO5[1] PIO5[2] VDD_RGB VSS_RGB B_OUT G_OUT R_OUT V_REF_RG I_REF_RG VDD_YCC VSS_YCC Y_OUT C_OUT CV_OUT V_REF_YC I_REF_YC VDD1_8 VSS PIO4[0] PIO4[1] PIO4[2] PIO4[3] PIO4[4] PIO4[5] PIO4[6] PIO4[7] VDD3_3 VDD_PCM VSS_PCM VSS DAC_SCLK DAC_PCMOUT0 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 PIO2[4] PIO2[3] PIO2[2] PIO2[1] PIO2[0] TRIGGER_OUT TRIGGER_IN PIO1[5] PIO1[4] VSS VDD1_8 PIO1[3] PIO1[2] PIO1[1] PIO1[0] PIO0[7] PIO0[6] PIO0[5] PIO0[4] PIO0[3] PIO0[2] PIO0[1] PIO0[0] VSS VDD3_3 CPU_ADR[21] CPU_ADR[20] CPU_ADR[19] CPU_ADR[18] CPU_ADR[17] CPU_ADR[16] CPU_ADR[15] CPU_ADR[14] CPU_ADR[13] CPU_ADR[12] CPU_ADR[11] VSS VDD1_8 CPU_ADR[10] CPU_ADR[9] CPU_ADR[8] CPU_ADR[7] CPU_ADR[6] CPU_ADR[5] CPU_ADR[4] CPU_ADR[3] CPU_ADR[2] CPU_ADR[1] VSS VDD3_3 CPU_DATA[15] CPU_DATA[14] ¶ Pin Configuration 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 A ¶ Block Diagram 2 UARTs, Internal peripherals 2 2 I C-SSCs, IR transceiver MAFE interface Central command port CPU (C2+) Cache sub-system RID Low power mode Clock generator DMAs ICache Front-end & link interface block move Refill control Diagnostic controller CPU arbiter Programmable CPU interface Ext peripherals: (EMI) flash, additional DRAM SDRAM ST20 arbiter and memory controller SDRAM block move I/F SDRAM arbiter (LMC) OSD, SP decoder and mixing Video filtering Video decoder Audio & Karaoke Audio in/out 376315150 892498299 376315150 892498299 Shared SDRAM interface (SMI) DENC Command I/F C QQ QQ Analog/digital Video output, 480i/480p CD FIFOs QQ 3763 1515 0 89 2498 299 TEL 13942296513 16, 32, 64 or 128-Mbit SDRAM JTAG debugging interface 13942296513 13942296513 Communications arbiter B DCache TEL TEL DMA Debug SRAM MPEG MPEG DVD TAP D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 119 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 ¶ Pin Function No. 1 B Dir. FP_SO Pin Function OUT Front Panel / DAC interface. Serial transfer data output. Data output to SACD decoder 2 A_DATA3 OUT 3 VCLK OUT 4 VDD_3V3 - reserved 3.3 V Power supply 5 VSS 6 B_DATA OUT SACD data output to SACD decoder 7 B_BCLK OUT SACD bit clock output to SACD decoder 8 B_FLAG Ground OU T SACD flag output to SACD decoder OUT It is not connected except 5 Disc Changer. 10 SQUEEZE OUT 11 RTS OUT UART(RS-232C) Request To Send signal output. OUT Output signal for S-Video output S1/S2 control & EURO(SCART) connector (FUNCTION SWITCHING) signal. 'H' : letter-box output mode. IN LETTER 13 CTS 14 VDD_1V8 - 15 VSS - 16 IN FE_DATA IN Output signal for S-Video output S1/S2 control. 'H' : squeeze output mode. UART(RS-232C) Clear To Send signal input. 1.8 V Power supply Ground FE_BCLK IN Front-End L6316 stream interface. Serial clock input. 18 FE_DVALID IN Front-End L6316 stream interface. Data valid flag input. 19 FE_SYNC IN Front-End L6316 stream interface. Serial synchronize flag input. 20 FE_EVALID IN Front-End L6316 stream interface. Error valid flag for RS_split. 21 FE_ECCBST IN Front-End L6316 stream interface. ECC block start flag for RS_split. 22 I/XP 376315150 892498299 TEL 13942296513 D E Output signal for a change of interlace/Progressive output for video driver. 'L' : progressive 'H' : interlace 23 VDD_RGB - RGB circuit 3.3 V Power supply 24 VSS_RGB - RGB circuit Ground 25 B_OUT OUT B / Cb 26 G_OUT OUT G/Y 27 R_OUT OUT 28 VREF_RGB IN 29 IREF_RGB IN 30 VDD_YCC - YC circuit 3.3 V Power supply - YC circuit Ground R / Cr RGB DAC reference RGB DAC current reference 31 VSS_YCC 32 Y_OUT OUT Y 33 C_OUT OUT C 34 CV_OUT OUT 35 VREF_YCC www F OUT 36 IREF_YCC 37 VDD_1V8 38 VSS IN x iao y u163. co m IN . CV YCC DAC reference YCC DAC current reference - 1.8 V Power supply - Ground XV-DV99 120 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 17 QQ QQ Front-End L6316 stream interface. Serial data input. 13942296513 13942296513 TRYPOS TEL TEL Only 5 Disc Changer. Tray rotation pulse input. CAPTURE_IN0 can be used. 9 12 C Pin Name 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 No. Pin Name Dir. A Pin Function It is not connected except 5 Disc Changer. 39 FE_XDRV_MUTE 40 FE_OPEN OUT OUT IN OUT 41 FE_CLOSE IN 42 CLAMP IN 43 XUNCLAMP IN OUT DISC_SNS 45 XDRVMUTE2 OUT 46 TP-x OUT IN VDD_3V3 - It is not connected except 5 Disc Changer. Only 5 Disc Changer. Input signal for showing disc clamp position. 'H' : complete disc clamp position. It is not connected except 5 Disc Changer. Only 5 Disc Changer. Input signal for showing disc un-clamp position. 'H' : complete disc clamp position. It is not connected except 5 Disc Changer. Only 5 Disc Changer. Input signal for disc existing. 'L' : existing reserved reserved QQ 3763 1515 0 89 2498 299 3.3 V Power supply 48 VDD_PCM - 1.8 V Power supply 49 VSS_PCM - Ground 50 VSS 51 A_BCK OUT Ground Audio DAC clock 52 A_DATA0 OUT Audio DAC Front L,R data 53 A_DATA1 OUT Audio DAC Center, LFE data 54 A_DATA2 OUT Audio DAC Surround L, R data 55 A_MCLK OUT Audio DAC Master clock 56 A_LRCK OUT Audio DAC L/R clock 57 A_DOUT OUT S/PDIF(IEC60958) digital audio output. OUT SMI SDRAM Address 58 SMI_A4 59 SMI_A5 60 SMI_A6 61 SMI_A7 62 SMI_A8 63 SMI_A9 64 VDD_1V8 - 1.8 V Power supply - Ground 65 VSS 66 SMI_A3 67 SMI_A2 68 SMI_A1 69 SMI_A0 www 70 SMI_A10 71 SMI_A11 72 SMI_A12 73 SMI_A13 . B x iao y u163. co m OUT C D E SMI SDRAM Address F XV-DV99 5 376315150 892498299 376315150 892498299 TEL 13942296513 47 Only 5 Disc Changer. Input signal for tray position. 'H' : complete CLOSE position. QQ QQ 44 It is not connected except 5 Disc Changer. 13942296513 13942296513 OUT It is not connected except 5 Disc Changer. Only 5 Disc Changer. Input signal for tray position. 'H' : complete OPEN position. TEL TEL OUT Only 5 Disc Changer. Output signal for motor driver muting. 'L' : muting 6 http://www.xiaoyu163.com 7 121 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 No. B Pin Name Pin Function SMI_CS0 OUT 75 SMI_CS1 OUT reserved 76 SMI_RAS OUT SMI SDRAM RAS 'L' SMI SDRAM chip select 'L'. 77 SMI_CAS OUT SMI SDRAM CAS 'L' 78 SMI_WE OUT SMI SDRAM Write Enable 'L' 79 SMI_DQML OUT SMI SDRAM Lower DQM 'L': Lower select 80 SMI_DQMU OUT SMI SDRAM Upper DQM 'L': Upper select 81 VDD_3V3 82 SMI_CLKIN SMI_D2 87 SMI_D3 88 SMI_D4 89 SMI_D5 90 SMI_D6 91 SMI_D7 92 SMI_D8 SMI_D9 94 VDD_1V8 95 SMI_CLKOUT I/O OUT Ground SMI SDRAM Data 1.8 V Power supply SDRAM clock output. D E VSS SMI_D10 98 SMI_D11 99 SMI_D12 100 SMI_D13 I/O Ground QQ 3763 1515 0 89 2498 299 SMI SDRAM Data 101 SMI_D14 102 SMI_D15 103 TRACK_CROSS OUT 104 DSD_XPCM OUT reserved reserved 105 DAC_XRST OUT Reset signal of audio DAC. 'L': Reset 106 ADC_PCMCLK OUT reserved 107 VDD_3V3 - 3.3 V Power supply 108 VSS - Ground 109 XTRST IN Diagnostic Control Unit interface 110 TMS IN Diagnostic Control Unit interface 111 TDO OUT Diagnostic Control Unit interface 112 TDI IN Diagnostic Control Unit interface 113 TCK IN 114 ROTDRV 115 BOOT_FROM_ROM www F - OUT IN Diagnostic Control Unit interface Only 5 disc changer. PWM output for tray rotation. Boot select 'L' : Boot from DCU. 'H' : Boot form ROM. x iao y u163. co m 116 LOAD_DRV OUT Only 5 disc changer. PWM output for tray Open/Close drive. 117 CPU_OE OUT OE signal for 16M bits FLASH memory for firmware. 'L': enable . XV-DV99 122 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 96 97 QQ 93 - 3.3 V Power supply External SDRAM clock input. 13942296513 SMI_D1 QQ 85 13942296513 VSS SMI_D0 IN TEL TEL 83 84 86 C Dir. 74 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 No. 118 Pin Name CPU_SDCK 119 VDD_1V8 120 PIXCLK Dir. OUT - IN Pin Function CLOCK for 64M bits SDRAM for debugging firmware. 1.8 V Power supply Master 27MHz system clock input. 121 VSS - Ground 122 VDD_PLL - Clock PLL circuit 1.8 V Power supply 123 VSS_PLL - Clock PLL circuit Ground Power ON system RESET signal. 'L': reset 124 XRESET IN 125 SACD_IRQ IN Interrupt signal from SACD decoder Front Panel interface. Hand-shake input. FP_XRDY IN 127 FE_INT IN Interrupt input signal from Front-End L6316. F_XWE, SD_DQML OUT 129 SD_DQMU OUT Debug SDRAM/SRAM Upper DQM 'L':upper select 130 SD_RXW OUT Debug SDRAM Read/Write 'L':write, 'H':read CPU_WAIT IN CE_FLASH OUT Flash memory Chip Enable 'L'. 133 CE_SACD OUT Licence signal from SACD decoder 134 CPU_CE1 OUT reserved OUT Debug SDRAM RAS 'L' Debug SRAM chip enable 'L' SD_XRAS QQ 3763 1515 0 89 2498 299 136 VDD_3V3 - 3.3 V Power supply 137 VSS - Ground 138 CPU_RAS1 OUT reserved 139 SD_XCAS OUT Debug SDRAM CAS 'L' 140 SD_XCS OUT Debug SDRAM Chip Select 'L' 141 CPU_D0 142 CPU_D1 143 CPU_D2 144 CPU_D3 145 CPU_D4 146 CPU_D5 I/O FLASH, Debug SDRAM/SRAM data 147 CPU_D6 148 CPU_D7 149 VDD_1V8 - 1.8 V Power supply 150 VSS - Ground 151 CPU_D8 152 CPU_D9 153 CPU_D10 154 CPU_D11 155 CPU_D12 156 CPU_D13 157 CPU_D14 158 CPU_D15 www 159 VDD_3V3 160 VSS . C D E I/O FLASH, Debug SDRAM/SRAM data x iao y u163. co m - 3.3 V Power supply - Ground F XV-DV99 5 376315150 892498299 376315150 892498299 TEL 13942296513 CPU wait 'H' input QQ QQ 131 132 13942296513 13942296513 128 Flash memory write enable. Debug SDRAM/SRAM Lower DQM. 'L': enable, Lower select. 135 B TEL TEL 126 A 6 http://www.xiaoyu163.com 7 123 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 No. B CPU_A1 162 CPU_A2 163 CPU_A3 164 CPU_A4 165 CPU_A5 166 CPU_A6 167 CPU_A7 168 CPU_A8 169 CPU_A9 170 CPU_A10 Dir. OUT Pin Function FLASH, Debug SDRAM/SRAM Address 171 VDD_1V8 - 1.8 V Power supply 172 VSS - Ground CPU_A11 CPU_A12 175 CPU_A13 176 CPU_A14 177 CPU_A15 178 CPU_A16 179 CPU_A17 180 CPU_A18 CPU_A19 182 CPU_A20 183 CPU_A21 FLASH, Debug SDRAM/SRAM Address 376315150 892498299 D E VDD_3V3 3.3 V Power supply - Ground OUT reserved QQ 3763 1515 0 89 2498 299 185 VSS 186 XEXPE 187 FE_ERROR 188 VSEL1 OUT EURO(SCART) connector (BLINKING) output signal 'L' : RGB output disable 'H' : RGB output enable 189 VSEL2 OUT EURO(SCART) connector V/Y, R/C signal. 'L' : VRGB output = YCGB 'H' : VRGB output = VRGB 190 FE_RST OUT Front-End L6316. Hardware reset output. 'L' : reset 191 SACD_XRST OUT Reset signal of SACD decoder. 'L' : reset IN Front-End L6316 stream interface. ECC Error flag 192 XMMUTE OUT Output for tone quality enhancement 193 B_SYNC OUT Sector synchronization output to SACD decoder 194 SDA I/O Front-End L6316 command interface I2C bus serial data line. 195 SCL OUT Front-End L6316 command interface I2C bus serial clock line. 196 B_WCLK OUT Word clock output to SACD decoder 197 TXD OUT UART(RS-232C) data output 198 VDD_1V8 199 VSS 200 RXD www F - 1.8 V Power supply - x iao y u163. co m IN . Ground UART(RS-232C) data input XV-DV99 124 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 TEL 13942296513 184 QQ QQ 181 OUT 13942296513 13942296513 173 174 TEL TEL C Pin Name 161 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 No. 201 Pin Name XAMUTE Dir. OUT Pin Function Output signal for analog audio output line muting. 'L' : muting 202 TRIGIN IN Diagnostic Control Unit interface 203 TRIGOUT OUT Diagnostic Control Unit interface 204 DAC_XCS0 OUT Chip enable for audio DAC serial control. 'L' : enable 205 DAC_XCS1 OUT Use of serial control of 5.1ch audio DAC is possible. 'L' : enable 206 FP_ACK OUT Front Panel / DAC interface. Hand-shake (acknowledge) output 'H'. OUT Front Panel / DAC interface. Serial transfer clock output. FP_SCK 208 FP_SI IN B TEL TEL 207 A Front Panel interface. Serial transfer data input. 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 125 8 1 2 3 http://www.xiaoyu163.com 4 7 M63018FP (DVDM ASSY : IC101) QQ 376315150 892498299 • FTS Driver IC A ¶ Pin Arrangement B TEL TEL 13942296513 13942296513 C 376315150 892498299 D E www F . x iao y u163. co m XV-DV99 126 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ ¶ Block Diagram 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 A ¶ Pin Function B TEL TEL 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 127 8 1 3 http://www.xiaoyu163.com 2 4 7 SAA7893HL/C2 (DVDM ASSY : IC801) A QQ 376315150 892498299 • SACD Decoder IC ¶ Block Diagram to host host_sel HF AGC B FRONTEND INTERFACE ADC HOST INTERFACE MEMORY MANAGER PSP-KEY DECODER key control SAA7893HL PI-bus DECRYPTION/ SECTOR PROCESSOR 8-CHANNEL DSD2PCM CONVERSION DEMUX 2, 5 or 6-channel LOSSLESS DECODER SPEAKER SETUP VOLUME CONTROL DELAY SWITCH MATRIX to DSD/PCM DAC SDRAM INTERFACE C to 64 Mbit SDRAM sys_clk 27-35 MHz aud_clk 256/384/512/768*fs external PCM E www F . x iao y u163. co m XV-DV99 128 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 D QQ QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 13942296513 13942296513 SACD AUDIO INTERFACE PI-BUS CONTROL TEL TEL data-bus REGISTER HOST INTERFACE 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 102 D_DQ[13] 2 101 D_DQ[2] H_DQ[14] 3 100 D_DQ[12] GND_IO1 4 99 GND_IO5 H_DQ[13] 5 98 D_DQ[3] H_DQ[12] 6 97 D_DQ[11] H_DQ[11] 7 96 D_DQ[4] H_DQ[10] 8 95 D_DQ[10] H_DQ[9] 9 94 D_DQ[9] VCC_IO1 10 93 D_DQ[6] H_DQ[8] 11 92 VCC_IO4 H_DQ[7] 12 91 D_DQ[8] H_DQ[6] 13 90 D_DQ[7] H_DQ[5] 14 89 D_LDQM H_DQ[4] 15 88 D_UDQM H_DQ[3] 16 87 D_DQ[5] 86 D_clk GND_IO2 17 85 VCC_Core2 H_procclock 18 81 D_RASn 80 D_Wen H_DQ[1] 23 H_CSn 24 79 D_ADDR[11] H_DQ[0] 25 78 D_ADDR[12] H_RWn 26 77 D_ADDR[9] H_WAIT 27 76 VCC_IO3 H_IRQn 28 75 D_ADDR[13] aud_clk 29 74 D_ADDR[8] PCM_dclk_in 30 73 D_ADDR[10] PCM_wclk_in 31 72 D_ADDR[7] VDDA 32 VSSA 33 71 D_ADDR[0] biasin 34 69 GND_IO3 70 D_ADDR[6] . E x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 D D_ADDR[3] 64 H_sel[1] 63 H_sel[0] 62 TCK 61 TDI 60 TDO 59 VCC_IO2 58 TMS 57 TRST 56 Be_dat(7) 55 Be_dat(6) 54 Be_dat(5) 53 Be_dat(4) 52 Be_dat(3) 51 Be_dat(2) 50 Be_dat(1) 49 Data_req 48 UDE_req 47 B_BCLK/SDCLK 46 B_WCLK/SENB 44 B_DATA/Be_dat(0) 45 www B_SYNC/Sync 43 65 D_ADDR[4] B_FLAG/SERR 42 66 D_ADDR[2] GND_IO7 38 PCM_LsRs_in 41 67 D_ADDR[5] VCC_IO7 37 PCM_LeRi_in 40 68 D_ADDR[1] Adcrefl 36 PCM_CeLf_in 39 Agcinp 35 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 H_DQ[2] 22 QQ QQ 83 GND_IO4 82 D_CASn sys_clk 21 C 84 GND_Core2 SAA7893HL GND_Core1 20 B 13942296513 13942296513 1 TEL TEL H_A[1] H_DQ[15] VCC_Core1 19 A 103 D_DQ[1] 104 D_DQ[14] 105 D_DQ[0] 106 VCC_IO5 107 D_DQ[15] 108 DSD_PCM_0 109 DSD_PCM_1 110 DSD_PCM_2 111 DSD_PCM_3 112 GND_IO6 113 DSD_PCM_4 114 DSD_PCM_5 115 DSD_PCM_6 116 DSD_PCM_7 117 DSD_PCM_8 118 VCC_IO6 119 DSD_PCM_10 120 DSD_PCM_9 121 DSD_PCM_11 122 RESETn 123 H_A_sel 124 H_A[6] 125 H_A[5] 126 H_A[4] 127 H_A[3] 128 H_A[2] ¶ Pin Layout 129 8 1 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 ¶ Pin Function A Pin Type[1] Description H_A[1] 1 IN address bus H_DQ[15] 2 I/O10 data bus H_DQ[14] 3 I/O10 data bus GND_IO1 4 GND_IO GND I/O pads H_DQ[13] 5 I/O10 data bus H_DQ[12] 6 I/O10 data bus H_DQ[11] 7 I/O10 data bus H_DQ[10] 8 I/O10 data bus H_DQ[9] 9 I/O10 data bus TEL VCC_IO1 10 VCC_IO VCC I/O pads H_DQ[8] 11 I/O10 data bus 12 I/O10 data bus H_DQ[6] 13 I/O10 data bus H_DQ[5] 14 I/O10 data bus H_DQ[4] 15 I/O10 data bus H_DQ[3] 16 I/O10 data bus B TEL Symbol 17 GND_IO GND I/O pads H_procclock 18 IN host processor EMI interface clock QQ VCC_Core1 19 VCC_core core supply voltage D E GND_core core ground sys_clk 21 IN system clock H_DQ[2] 22 I/O10 data bus H_DQ[1] 23 I/O10 data bus H_CSn 24 IN host chip select; active LOW H_DQ[0] 25 I/O10 data bus H_RWn 26 IN read = 1; write = 0 H_WAIT 27 O10 wait signal H_IRQn 28 O10 interrupt request; active LOW aud_clk 29 IN DSD audio clock PCM_dclk_in 30 IN PCM data clock PCM_wclk_in 31 IN PCM word clock VDDA 32 VDDCO VDD of ADC VSSA 33 VSSCO VSS of AGC and ADC; connected to substrate biasin 34 APIO bias current input Agcinp 35 APIO AGC positive input signal; HF in Adcrefl 36 APIO ADC decoupling VCC_IO7 37 VCC_IO VCC I/O pads GND_IO7 38 GND_IO GND I/O pads PCM_CeLf_in www F QQ 3763 1515 0 89 2498 299 20 . x iao y u163. co m 39 IN PCM data center or LFE XV-DV99 130 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 TEL 13942296513 GND_Core1 QQ GND_IO2 C 13942296513 13942296513 H_DQ[7] 6 http://www.xiaoyu163.com 5 7 8 Type[1] Description PCM_LeRi_in 40 IN PCM data left or right PCM_LsRs_in 41 IN PCM data left or right surround B_FLAG/SERR 42 IN I2S-bus flag (EDC flag) B_SYNC/Sync 43 IN sector sync or absolute time sync B_WCLK/SENB 44 IN I2S-bus word clock or UDE data sense from host B_DATA/Be_dat(0) 45 IN I2S-bus data or LSB data of parallel interface B_BCLK/SDCLK 46 IN I2S-bus bit clock UDE_req 47 IN host request data from front-end; routed via the SAA7893HL Data_req 48 O10 data request for UDE Be_dat(1) 49 IN front-end parallel data interface Be_dat(2) 50 IN front-end parallel data interface Be_dat(3) 51 IN front-end parallel data interface Be_dat(4) 52 IN front-end parallel data interface Be_dat(5) 53 IN front-end parallel data interface Be_dat(6) 54 IN front-end parallel data interface Be_dat(7) 55 IN front-end parallel data interface TRST 56 IN1 boundary scan reset QQ TMS 57 IN1 boundary scan mode select 58 VCC_IO VCC I/O pads 59 O10 output TDI 60 IN1 boundary scan data input TCK 61 IN boundary scan clock H_sel[0] 62 IN host select signals: SAD16, MAD16 and SAD08 H_sel[1] 63 IN host select signals: SAD16, MAD16 and SAD08 D_ADDR[3] 64 O10 SDRAM address bus D_ADDR[4] 65 O10 SDRAM address bus D_ADDR[2] 66 O10 SDRAM address bus D_ADDR[5] 67 O10 SDRAM address bus D_ADDR[1] 68 O10 SDRAM address bus GND_IO3 69 GND_IO GND I/O pads D_ADDR[6] 70 O10 SDRAM address bus D_ADDR[0] 71 O10 SDRAM address bus D_ADDR[7] 72 O10 SDRAM address bus D_ADDR[10] 73 O10 SDRAM address bus D_ADDR[8] 74 O10 SDRAM address bus D_ADDR[13] 75 O10 SDRAM address bus VCC_IO3 76 VCC_IO VCC I/O pads D_ADDR[9] 77 O10 SDRAM address bus x iao y u163. co m 6 http://www.xiaoyu163.com 7 D E F XV-DV99 5 376315150 892498299 VCC_IO2 TDO C QQ . 13942296513 376315150 892498299 www B QQ 3763 1515 0 89 2498 299 TEL 13942296513 A TEL TEL Pin 13942296513 QQ 376315150 892498299 Symbol 131 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 B Pin Type[1] Description D_ADDR[12] 78 O10 SDRAM address bus D_ADDR[11] 79 O10 SDRAM address bus D_Wen 80 O10 read or write D_RASn 81 O10 row address select; active LOW D_CASn 82 O10 column address select; active LOW GND_IO4 83 GND_IO GND I/O pads GND_Core2 84 GND_core core ground VCC_Core2 85 VCC_core core supply voltage D_clk 86 O10 clock signal needed for SDRAM 87 I/O10 data bus D_UDQM 88 O10 DQ mask enable (upper) D_LDQM 89 O10 DQ mask enable (lower) D_DQ[7] 90 I/O10 data bus D_DQ[8] 91 I/O10 data bus VCC_IO4 92 VCC_IO VCC I/O pads D_DQ[6] 93 I/O10 data bus D_DQ[9] 94 I/O10 data bus I/O10 data bus 96 I/O10 data bus D_DQ[11] 97 I/O10 D_DQ[3] 98 I/O10 GND_IO5 99 GND_IO QQ 3763 1515 0 89 2498 299 D_DQ[12] 100 I/O10 data bus D_DQ[2] 101 I/O10 data bus D_DQ[13] 102 I/O10 data bus D_DQ[1] 103 I/O10 data bus D_DQ[14] 104 I/O10 data bus D_DQ[0] 105 I/O10 data bus VCC_IO5 106 VCC_IO VCC I/O pads D_DQ[15] 107 I/O10 data bus DSD_PCM_0 108 O10 6-channel data output DSD_PCM_1 109 O10 6-channel data output DSD_PCM_2 110 O10 6-channel data output 376315150 892498299 E data bus GND I/O pads DSD_PCM_3 111 O10 6-channel data output GND_IO6 112 GND_IO GND I/O pads DSD_PCM_4 113 O10 6-channel data output DSD_PCM_5 114 O10 6-channel data output DSD_PCM_6 115 O10 6-channel clock/control DSD_PCM_7 116 O10 6-channel clock/control DSD_PCM_8 117 O10 2-channel clock/control VCC_IO6 118 VCC_IO VCC I/O pads www F data bus . x iao y u163. co m XV-DV99 132 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 95 D_DQ[4] QQ QQ D_DQ[10] TEL 13942296513 D 13942296513 13942296513 D_DQ[5] TEL TEL C Symbol 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 Symbol Pin Type[1] Description DSD_PCM_10 119 O10 2-channel data output DSD_PCM_9 120 O10 2-channel clock or control 121 O10 2-channel data output RESETn 122 IN asynchronous reset; active LOW H_A_sel 123 IN address select H_A[6] 124 IN address bus H_A[5] 125 IN address bus H_A[4] 126 IN address bus H_A[3] 127 IN address bus H_A[2] 128 IN address bus [1] B TEL TEL DSD_PCM_11 13942296513 13942296513 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 C QQ QQ Explanation of input and output ports: IN: digital input port; all dedicated inputs are TTL tolerant. IN1: digital input port with internal pull-up resistor. I/O10: bidirectional port with 10 ns slew rate. O10: 3-state (in test mode) output port with 10 ns slew rate. APIO: analog input port. VDDCO: analog VDD port (1.8 V). VSSCO: analog VSS port. GND_IO: ground for I/O pads. VCC_IO: VCC for I/O pads (3.3 V). GND_core: ground for core. VCC_core: VCC for core (1.8 V). TEL 13942296513 A D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 133 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 PDC110B (CONTROL ASSY : IC5501) • System Control Microcomputer Pin Functions No. B 2 PA4/RD# 3 PA5/RS 4 P70 / INT0 / T0LCP / AN8 I/O Function O Control power supply for DVD module HPDET I Detect to insert headphone NC O NC ACPULSE I AC PULSE input (Interruption) 5 P71 / INT1 / T0HCP / AN9 NC 6 P72 / INT2 / T0IN RDSCLK O 7 P73 / INT3 / T0IN REMOCON I REMOCON signal input (Interruption) 8 RES# XRESET I µ-com reset input I (O) NC Clock input from RDS decoder (without RDS : Low output) XT1 / AN10 XT1 − (When this port don't use , please connect VDD) XT2 / AN11 XT2 − (When this port don't use , please set open) 11 VSS1 VSS1 − GND 12 CF1 CF1 − for OSC 13 CF2 CF2 − for OSC 14 VDD1 VDD1 − VDD 15 P80 / AN0 SIMUKE I Destination distinction input 16 P81 / AN1 MODEL I model distinction input 17 P82 / AN2 VDET I DVD 3.3V detection input 18 P83 / AN3 KEY1 I Key1 input 19 P84 / AN4 NC O 20 P85 / AN5 NC O NC NC P86 / AN6 ST/TUNE I STEREO tuned detection input P87 / AN7 XPROTECT I Protection and Fan Error detection input 21 22 TEL 13942296513 QQ 3763 1515 0 89 2498 299 23 P10/SO0 SDATA O System bus data output (AMP side output) 24 P11 / SI0 / SB0 MDATA I System bus data input (AMP side input) 25 P12 / SCK0 SCLK I System bus clock input 26 P13 / SO1 DSPDI O Data output to DSP (MOTOROLA) and DIR 27 P14 / SI1 / SB1 DSPDO I Data input from DSP (MOTOROLA) 28 P15 / SCK1 DSPCK O Clock output to DSP (MOTOROLA) and DIR 29 P16/T1PWML SYSCS2 O Chip select 2 for system bus 30 P17/T1PWMH/BUZ SYSCS1 O Chip select 1 for system bus 31 PE0 XHPMUTE O HP MUTE ON/OFF 32 PE1 XRECMUTE O REC OUTPUT MUTE ON/OFF 33 PE2 NC O NC 34 PE3 NC O NC 35 PE4 NC O NC 36 PE5 NC O NC 37 PE6 TIMERLED O Control TIMER LED 38 PE7 (LEVELSHIFT) O VOL 0 to 5 : H (standby) 39 VSS4 VSS4 − GND 40 VDD4 VDD4 − VDD www F . x iao y u163. co m XV-DV99 134 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 9 10 QQ QQ E DVDON/OFF 13942296513 13942296513 D Pin Name PA3/WR# TEL TEL C Mark 1 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 No. Mark Pin Name I/O Function ATT10dB O Control ATT 10dB 42 PF1 ATT6dB O Control ATT 6dB 43 PF2 STEST I Set SERVICE TEST MODE for Service 44 PF3 UTEST I Set UNIT CHECK for checker 45 PF4 DTSDMIX O Cntrol of gain-up for dts down-mix 46 PF5 SWFMIX O Control for subwoofer mix 47 PF6 DIMSEL1 O DIMMER SELECT1 48 PF7 DIMSEL2 O DIMMER SELECT2 49 SI2P0/SO2 LCDDAT O Data for LCD driver 50 SI2P1/SI2/SB2 LCDCS O Chip enable for LCD driver 51 SI2P2/SCK2 LCDCLK O Clock for LCD driver 52 SI2P3/SCK20 (XLCDRST) O Reset for LCD driver (standby) 53 PWM1 NC 54 PWM0 NC 55 VDD2 VDD2 – VDD GND B NC NC VSS2 P00 TXCE O Chip enable for tuner LSI 58 P01 NC O NC 59 P02 DIGSEL O SW for Digital 1/2 select 60 P03 WVOLCE O Chip enable for woreless-vol IC 61 P04 TXCLK O Clock for tuner LSI 62 P05 TXODATA O Data for tuner LSI 63 P06 TXMUTE O Control mute of tuner 64 P07 RDSPOW O Control power supply of RDS (L : POWER ON) 65 P20/INT4/T1IN RDSDATA I (O) 66 P21/INT4/T1IN TXIDATA I 67 P22/INT4/T1IN DVDACK 68 P23/INT4/T1IN XVMUTE 69 P24/INT5/T1IN DVDMUTE I Request of MUTE from DVD MODULE (Interruption) 70 P25/INT5/T1IN AUDIOSELA O SW for Audio in DVD-A and SA-CD 71 P26/INT5/T1IN INPUTSELC O AUDIO INPUT SELECT C (or TV AUDIO INPUT SELECT) 72 P27/INT5/T1IN XWMUTE O WIRE LESS MUTE request 73 P30 WSELA O WIRE LESS OUTPUT SELECT A 74 P31 INPUTSELB O AUDIO INPUT SELECT B 75 P32 INPUTSELA O AUDIO INPUT SELECT A 76 P33 XTL0 O Selection X'tal to DIR 77 P34 DIRERR I LOCK/UNLOCK from DIR 78 P35 DIRRST O Reset to DIR 79 P36 DIRCS O Chip select to DIR 80 PB7/D7 DIRDO I Data input from DIR QQ 3763 1515 0 89 2498 299 Input RDS data Input data from tuner LSI I Ackknowlegement from DVD MODULE (Interruption) O VIDEO MUTE request to DVD MODULE 376315150 892498299 376315150 892498299 VSS2 57 C QQ QQ 56 – TEL 13942296513 A 13942296513 13942296513 PF0 TEL TEL 41 D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 135 8 1 B Mark Pin Name I/O Function 81 PB6/D6 DSPMODE O MODE selection (ROM/RAM) to DSP (MOTOROLA) 82 PB5/D5 DSPHREQ I Error detection from DSP (MOTOROLA) 83 PB4/D4 HPVOLCE O Chip enable for HP-vol IC 84 PB3/D3 DSPSS O Slave selection to DSP (MOTOROLA) 85 PB2/D2 XDSPRST O RESET to DSP (MOTOROLA) MODULE 86 PB1/D1 DECMUTE I Detection of 1st DSP boot success from DSP MODULE 87 PB0/D0 XDSPMUTE O MUTE requeat to DSP MODULE 88 VSS3 VSS3 − GND 89 VDD3 VDD3 − VDD 90 PC7/A7 DVDA6dBATT O ATTENUATION(6dB) operating Bass/Treble at DVD-AUDIO 91 PC6/A6 SYSPOW O Control power supply of system 92 PC5/A5 XTVMUTE O Control muting of TV (EURO) 93 PC4/A4 XDVDRST O RESET to DVD MODULE 94 PC3/A3 XSYSMUTE O Control mute of system 95 PC2/A2 VOLCE O Chip enable for E-vol IC 96 PC1/A1 VOLCLK O Clock for E-vol IC / HP-vol IC / Wireless-vol IC 97 PC0/A0 VOLDATA O Data for E-vol IC / HP-vol IC / Wireless-vol IC 98 PA0/CS2# FLASHE/D − for FLASH writing 99 PA1/CS1# FLASHDO − for FLASH writing FLASHCLK − for FLASH writing 100 PA2/CS0# E www F . x iao y u163. co m XV-DV99 136 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ • Port0 (P00-P07) can be selected for input or output by each 4 bits (P00-P03,P04-P07). Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port1 (P10-P17) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit in option. • Port2 (P20-P27) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port3 (P30-P36) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port7 (P70-P73) can be selected for input or output by each 1 bit. Set for input when reset. • Port8 (P80-P87) can be selected for input or output by each 1 bit. Set for input when reset. • PortA (PA0-PA5) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • PortB (PB0-PB7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • PortC (PC0-PC7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • PortE and PortF can be selected for input or output by each 2 bits. 13942296513 13942296513 D 4 TEL TEL C 3 http://www.xiaoyu163.com QQ 376315150 892498299 No. A 2 6 http://www.xiaoyu163.com 5 7 8 7.3 DISC/CONTENT FORMAT QQ 376315150 892498299 Disc / content format playback compatibility General disc compatibility This player was designed and engineered to be compatible with software bearing one or more of the following logos: DVD-R DVD-RW CD-R/RW compatibility • This unit will play CD-R and CD-RW discs recorded in CD Audio or Video CD/Super VCD format, or as a CD-ROM containing MP3 or JPEG files. However, any other content may cause the disc not to play, or create noise/distortion in the output. Audio CD Video CD CD-RW Super Audio CD • Unfinalized CD-R/RW discs recorded as CD Audio can be played, but the full Table of Contents (playing time, etc.) will not be displayed. TEL 13942296513 have been finalized using a DVD-recorder. • This unit will play DVD-RW discs recorded using the Video Recording (VR) format. Fujicolor CD * DV-667A only • DVD-RW shows in the display when a VR format DVD-RW disc is loading. • KODAK Picture CD • is a trademark of Fuji Photo Film Co. Ltd. Other formats, including but not limited to the following, are not playable in this player: DVD-RAM / DVD-ROM / CD-ROM* * Except those that contain MP3 or JPEG. See also “Compressed audio compatibility ” and “JPEG file compatibility” below. DVD-R/RW and CD-R/RW discs (Audio CDs and Video CD/Super VCDs) recorded using a DVD recorder, CD recorder or personal computer may not be playable on this unit. This may be caused by a number of possibili- www . • When playing a VR format DVD-RW discs that was edited on a DVD recorder, the screen may go momentarily black at edited points and/or you may see scenes from immediately before the edited point. • This unit cannot record DVD-R/RW discs. x iao y u163. co m 6 D E • Unfinalized DVD-R/RW discs cannot be played in this player. F XV-DV99 5 376315150 892498299 376315150 892498299 63 1unit5will 15play 0 DVD-R/RW 89 249discs 8 299 QQ 3•7This recorded using the DVD-Video format that DVD-R/RW compatibility C QQ QQ Super VCD* CD-R 13942296513 13942296513 • This unit cannot record CD-R or CD-RW discs. B TEL TEL DVD-Audio DVD-Video A ties, including but not limited to: the type of disc used; the type of recording; damage, dirt or condensation on either the disc or the player’s pick-up lens. See below for notes about particular software and formats. http://www.xiaoyu163.com 7 137 8 1 2 3 http://www.xiaoyu163.com QQ 376315150 892498299 PC-created disc compatibility A 4 • When naming MP3 files, add the corresponding file name extension (.mp3). Files are played according to the file extension. To prevent noise and malfunctions, do not use these extensions for other kinds of files. • If you record a disc using a personal computer, even if it is recorded in a “compatible format” as listed above, there will be cases in which the disc may not be playable in this machine due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information. • Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information. B 13942296513 C QQ QQ 3763 1515 0 89 2498 299 TEL 13942296513 376315150 892498299 • Fixed bit-rate MP3 files are recommended. Variable bit-rate (VBR) MP3 files are playable, but playing time may not be shown correctly.. JPEG file compatibility • The CD-ROM used to compile your MP3 files must be ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this player. D • Use CD-R or CD-RW media for recording your files. The disc must be finalized (i.e. the session must be closed) in order to play in this unit. This player is not compatible with multi-session discs. Only the first session of a multi-session disc will be recognized. E • This player only plays tracks that are named with the file extension .mp3 or .MP3. www F . • Baseline JPEG and EXIF 2.1* still image files up to 8 mega-pixels are supported (maximum vertical and horizontal resolution is 5120 pixels). (*File format used by digital still cameras) • The CD-ROM used to compile your JPEG files must be ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this player. • This player only displays files that are named with the file extension .jpg or .JPG. x iao y u163. co m XV-DV99 138 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 • There are many different recording bitrates available to encode MP3 files. This unit was designed to be compatible with all of them. Audio encoded at 128Kbps should sound close to regular CD Audio quality. This player will play lower bit-rate files, but please note that the sound quality becomes noticeably worse at lower bit-rates. QQ • This unit will play CD-ROM, CD-R, and CD-RW discs containing files saved in the MPEG-1 Audio Layer 3 (MP3) format with a sampling rate of 32, 44.1 or 48kHz. Incompatible files will not play and the message Can’t play this format will be displayed (NO PLAY in the front panel display). 13942296513 • Folder and track names (excluding the file extension) are displayed. Compressed audio compatibility TEL TEL • This player can recognize up to 999 files (MP3/JPEG) and up to 499 folders. If a disc exceeds these limits, only files and folders up to these limits will be playable. Files and folders are read/displayed in alphabetical order. Note that if the file structure is very complex, you may not be able to read/play all files on the disc. 6 http://www.xiaoyu163.com 5 7 8 7.4 CLEANING QQ 376315150 892498299 A Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools: Position to be cleaned Cleaning tools Pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 Position to be cleaned Cleaning tools Fans Cleaning paper : GED-008 B TEL TEL 13942296513 13942296513 QQ QQ 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 139 8 1 3 http://www.xiaoyu163.com 2 4 8. PANEL FACILITIES QQ 376315150 892498299 8.1 PANEL FACILITIES A Front panel 1 2 3 B TIMER 0 OPEN/CLOSE STANDBY/ON TEL TEL 4 6 8 1 VOLUME buttons Use to adjust the volume. 5 STANDBY/ON Press to switch the system on or into standby. 2 7 Press to stop playback. 6 Disc tray 7 0 OPEN/CLOSE Press to open/close the disc tray. 8 PHONES jack Headphone jack. 376315150 892498299 D Display unit 9 9 E www F 10 Remote sensor . 10 Display See Display on next page for detailed information. x iao y u163. co m XV-DV99 140 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ 4 Timer indicator Lights when the wake-up timeris set. C 13942296513 13942296513 3 6 Press to switch to the DVD/CD function. Also press to start/pause/resume playback. 7 5 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 Display 1 2 3 5 6 7 8 9 PGM RPT-1 RDM V.PART ATT 4 MIDNIGHT QUIET 10 11 REC MODE kHz MHz 19 18 12 13 A 14 PRO LOGIC DIGITAL ADV.SURR 17 16 15 B TEL TEL 1 6 RPT and RPT-1 RPTlights during repeat play. RPT-1lights during repeat one-track play. Tuner indicators 13942296513 13942296513 Lights when in one of the RDS display or search modes. 7 RDM Lights during random play. 8 V.PART Light when playing a video part of a DVD disc. Lights when a broadcast is being received. 9 ATT Lights when the input attenuator is active for the currently selected analog input. Lights when a stereo FM broadcast is being received in auto stereo mode. QQ 3763 1515 0 89 2498 299 Lights when the wake-up timer is set. 3 MIDNIGHT Lights when the Midnight mode is selected. Lights when the sleep timer is active. 4 QUIET Lights when the Quiet mode is selected. 12 2 PRO LOGIC II Lights during Dolby Pro Logic decoding. 5 PGM Lights when a program list has been programmed. 13 2 DIGITAL Lights during playback of a Dolby Digital source. 376315150 892498299 376315150 892498299 2 3 Lights when a disc is playing. 11 Timer indicators QQ QQ TEL 13942296513 Lights when FM mono reception is selected. 10 REC MODE Lights when Rec Mode is active. C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 141 8 1 A 2 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 14 Speaker indicators These show which speakers are being used to output the current source. The illustrations below show some example displays. 5.1 channel surround sound Stereo (2.1 channel) sound 3.1 channel sound with Dialogue enhancement on the center channel B 5.1 channel surround sound with Virtual Surround Back mode active TEL TEL 13942296513 13942296513 15 ADV.SURR. Lights when one of the Advanced Surround listening modes is selected. 16 DTS Lights during playback of a DTS source. 17 kHz / MHz Indicates the unit of the frequency shown in the character display (kHz for AM, MHz for FM). C 376315150 892498299 19 Lights during multi-angle scenes on a DVD disc. D E www F . x iao y u163. co m XV-DV99 142 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ 18 Character display 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 Remote control 3 DISPLAY Press to display/change disc information shown on-screen. A STANDBY/ON CD FM/AM DVD TUNER L1/L2 TV DISPLAY LINE 0 8 1 3 4 5 ¢ 1 and 12 13 TUNE+ ST– ¡ and E/ 0 6 ST+ Use for forward slow motion playback, frame advance and forward scanning. ENTER MUTE TUNE– SOUND 8 14 9 8 MASTER VOLUME P INPUT B Press to pause playback; press again to restart. TV CONTROL 10 /e Use for reverse slow motion playback, frame reverse and reverse scanning. RETURN DVD MENU 7 Press to start or resume playback. 11 ¡ 7 Disc playback controls 3 OPEN/CLOSE 3 4 4 0 1 2 VOL TEL TEL 7 Press to stop playback. BASS MODE DIALOGUE AUTO SURROUND 15 17 18 19 20 PROGRAM AUDIO REPEAT SUBTITLE RANDOM ANGLE ZOOM TOP MENU HOME MENU 1 2 3 SYSTEM SETUP TEST TONE CH LEVEL 4 5 6 DIMMER QUIET/ MIDNIGHT TIMER/ CLOCK 7 8 9 – /– – FOLDER– FOLDER+ 0 ENTER CLR MAIN 21 SUB 5 4 Press to jump to the beginning of the current chapter/track, then to previous chapters/ tracks. 13942296513 13942296513 16 VIRTUAL SB ADVANCED 6 DVD MENU Press to display a DVD disc menu, or the Disc Navigator if a VR format DVD-RW, CD, Video CD, MP3 or JPEG disc is loaded. 22 7 Cursor buttons, ENTER and tuning buttons PDP ROOM SETUP • Functions printed in green on the remote control are accessed by switching the MAIN /SUB/PDP switch to SUB. ENTER Press to select an option or execute a command. 1 STANDBY/ON Press to switch the system on or into standby. TUNE +/– Use to tune the radio. 2 Function select buttons Press to select the source you want to listen to (DVD (CD). TUNER,TV, LINE) ST +/– Use to select station presets when listening to the radio. 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 QQ QQ Cursor buttons Use the cursor buttons (» / « / | / \) to navigate on-screen displays and menus. C D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 143 8 1 3 http://www.xiaoyu163.com 4 QQ 376315150 892498299 8 A 2 (In SUB) MUTE Press to mute all sound from the speakers and headphones (press again to cancel). BASS MODE Use to select a Bass Mode. DIALOGUE Use to select a Dialogue mode. 9 MASTER VOLUME Use to adjust the volume. VIRTUAL SB Press to switch the Virtual Surround Back speaker effect on/off. 10 TV CONTROL Press to switch the TV on or into standby. 16 DVD/CD buttons INPUT Press to switch the TV input. (In MAIN) AUDIO Press to select an audio channel or language. P +/– Use to select channels on the TV. B TEL 11 0 OPEN/CLOSE Press to open/close the disc tray. 13942296513 13 RETURN Press to return to a previous menu screen. (In SUB) PROGRAM Use to program/play a program list. 14 SOUND Press to access the sound menu, from which you can adjust the DSP effect level, bass and treble, etc. REPEAT Use to select a repeat play mode. RANDOM Use to select a random play mode. 376315150 892498299 AUTO Press to select the default decoding for the current source. 17 (In SUB) ZOOM Press to change the screen zoom level. SURROUND Use to select a Surround mode. ADVANCED Use to select an Advanced Surround. TOP MENU Use to display the top menu of a DVD disc in the play position (this may be the same as pressing DVD MENU). E www F . x iao y u163. co m XV-DV99 144 1 2 3 http://www.xiaoyu163.com 4 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 (In MAIN) QQ QQ 15 Surround sound mode/sound enhancement buttons D 13942296513 ANGLE Press to change camera angle during DVD multi-angle scene playback. 12 ¢ Press to jump to the next chapter/track. C TEL SUBTITLE Press to display/change the DVD subtitle display. VOL +/– Use to adjust the volume on the TV. 6 http://www.xiaoyu163.com 5 7 8 QQ 376315150 892498299 21 MAIN / SUB / PDP Change from MAIN to SUB to access functions printed in green. Switch to PDP to be able to use teletext with Pioneer plasma displays (see Teletext on/off below) HOME MENU Press to display (or exit) the on-screen menu for Initial Settings, Play Mode functions, etc. 18 (In SUB) SYSTEM SETUP Use to make various system and surround sound settings. (In MAIN) TEST TONE Use to output the test tone (for speaker setup). (In PDP) A ROOM SETUP Press to start Room Setup. (Teletext on/off) Press to display/hide the teletext screen. (Use the number buttons and the blue, green, yellow and red buttons to navigate teletext screens when using with a Pioneer plasma display.) CH LEVEL Use to adjust the speaker level. 19 (In SUB) DIMMER Press to dim or brighten the display. B 22 (In MAIN) TEL TEL Number buttons Use the number buttons for selecting titles/chapters/tracks from a disc directly. QUIET/MIDNIGHT Use to select the Quiet and Midnight modes. 13942296513 13942296513 TIMER/CLOCK Press to display the clock and to access the timer menu. 20 (In MAIN) CLR Press to clear an entry. (In SUB) FOLDER – Press to jump to previous folders. FOLDER + Press to jump to the next folder. 376315150 892498299 376315150 892498299 QQ 3763 1515 0 89 2498 299 TEL 13942296513 C QQ QQ ENTER Selects menu options, etc. (works exactly the same as the ENTER button in 7 above). D E www . x iao y u163. co m F XV-DV99 5 6 http://www.xiaoyu163.com 7 145 8