Switching the Paper Source to Match the Purpose Page 262 of 815 pages Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Switching the Paper Source to Match the Purpose Switching the Paper Source to Match the Purpose In this machine, there are two paper sources, a rear tray and a cassette. You can facilitate printing by selecting a paper source setting that matches your print conditions or purpose. The procedure for setting paper source is as follows: 1. Open the printer driver setup window 2. Select the paper source From the Paper Source list on the Main tab, select the paper source that matches your purpose. Automatically Select Plain paper whose Page Size is Letter 8.5"x11", A5, A4, or B5 is fed from the cassette. Other sizes of plain paper and paper types other than plain paper are fed from the rear tray. Rear Tray Paper is always fed from the rear tray. Cassette Paper is always fed from the cassette. Important Plain paper that is not Letter 8.5"x11", A5, A4, or B5 and paper types other than plain paper cannot be fed from the cassette. Continuous Autofeed If plain paper runs out in the specified paper source, the printer automatically switches the paper source. When printing a large volume of data, load plain paper of the same size in both paper sources. You can therefore reduce the trouble of having to load paper because the printer automatically switches the paper source when paper runs out in one paper source. Important Continuous Autofeed is unavailable when paper other than Plain Paper is selected for Media Type. Since the printer feeds paper from the paper source that was being used the last time Continuous Autofeed was selected and printing ended, load the same paper in both the rear tray and the cassette.