Download Canon PIXMA MP620B Instruction manual

Transcript
Setting Up the Card Slot as the Memory Card Drive of the Computer
Page 343 of 815 pages
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Setting Up the
Card Slot as the Memory Card Drive of the Computer
Setting Up the Card Slot as the Memory Card Drive of the
Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
Note
For details on using the Card Slot over a network, see Using the Card Slot over a Network .
In Macintosh, you cannot write data to a memory card in the Card Slot over a network.
Important
When Read/write attribute in Advanced settings under Device settings is set to Writable from
USB PC or Writable from LAN PC using the Operation Panel of the machine, card direct
printing cannot be done. After using the Card Slot as the memory card drive of the computer,
remove the memory card, then be sure to set Read/write attribute to Not writable from PC.
When you turned off the machine, Writable from USB PC to Writable from LAN PC will be
canceled and the setting is returned to Not writable from PC when you turn on the machine
next time.
1. Make sure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. For details, refer to Printing from a
Memory Card .
2. Select
3. Select
Settings on the HOME screen, then press the OK button.
Device settings, then press the OK button.
4. Select Advanced settings, then press the OK button.
5. Select Read/write attribute, then press the OK button.
6. Specify the read/write attribute.
Not writable from PC
The Card Slot is used only for reading. Be sure to select this mode when printing photos from
a memory card.
Writable from USB PC
The Card Slot is used as the memory card drive of a USB connected computer. Data can be
written into the memory card from the USB connected computer.
Writable from LAN PC
The Card Slot is used as the memory card drive of a Net work connected computer. Data can
be written into the memory card from the Net work connected computer.
7. Press the OK button.
Important
If you used the Card Slot as the memory card drive of the computer, you need to do a "safe
removal" operation on your computer before physically removing the memory card from your
machine.
In Windows, right-click the
Removable Disk icon and click Eject. If Eject is not
displayed on the screen, confirm that the Access lamp is not flashing and remove the
memory card.
Over a network: The removal operation is not needed.