Color Settings Tab Page 567 of 815 pages Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Color Settings Tab Color Settings Tab On the Color Settings tab, you can specify the following settings. Color Adjustment Select either of the following. Recommended is selected by default. This function is available when Color Mode is Color or Grayscale. Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you normally select this setting. Color Matching Select this to automatically match the scanner, monitor and color printer colors, thus reducing time and trouble to manually match the monitor and printer colors. Color Adjustment Buttons will be disabled. This function is available when Color Mode is Color. - Source(Scanner): Select scanner profile. - Target: Select target profile. - Monitor: Select this to display preview image with optimum correction for monitor. - Defaults: Returns to the default Color Matching settings. None Select this to disable color correction provided by ScanGear (scanner driver). Note Color Matching is available when ScanGear (scanner driver), monitor, color managementcompliant application (such as Photoshop) and printer are set up correctly. Refer to the corresponding manual for the monitor, printer and application settings. Always Execute the Auto Tone Select this checkbox to always apply Auto Tone to scanned images. This checkbox is selected by default. Important This function is available when Color Mode is Color or Grayscale. You cannot select this setting when None or Color Matching is selected on the Color Settings tab.