Download Sharp CD-CH1000 Service manual
Transcript
CD-CH1000 SERVICE MANUAL No. S8070CDCH1000 AUDIO TOWER SYSTEM MODEL CD-CH1000 CD-CH1000 Audio Tower System consisting of CD-CH1000 (main unit) and CP-RW5000 (speaker system). • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified should be used. CONTENTS Page IMPORTANT SERVICE NOTES (FOR U.S.A. ONLY) ...................................................................................................... 2 SPECIFICATIONS ............................................................................................................................................................ 2 NAMES OF PARTS .......................................................................................................................................................... 3 OPERATION MANUAL ..................................................................................................................................................... 5 DISASSEMBLY ................................................................................................................................................................. 8 REMOVING AND REINSTALLING THE MAIN PARTS .................................................................................................. 11 CD CHANGER MECHANISM MAIN BASE PARTS ASSEMBLING/ADJUSTING PROCEDURE ................................. 13 ADJUSTMENT ................................................................................................................................................................ 20 TEST MODE ................................................................................................................................................................... 21 ERROR MESSAGE LIST ................................................................................................................................................ 24 NOTES ON SCHEMATIC DIAGRAM ............................................................................................................................. 25 TYPES OF TRANSISTOR AND LED .............................................................................................................................. 25 BLOCK DIAGRAM .......................................................................................................................................................... 26 SCHEMATIC DIAGRAM ................................................................................................................................................. 32 WIRING SIDE OF P.W.BOARD ...................................................................................................................................... 43 WAVEFORMS OF CD CIRCUIT ..................................................................................................................................... 52 TROUBLESHOOTING .................................................................................................................................................... 53 FUNCTION TABLE OF IC .............................................................................................................................................. 55 LCD DISPLAY ................................................................................................................................................................. 62 PARTS GUIDE/EXPLODED VIEW PACKING OF THE SET (FOR U.S.A. ONLY) SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without notice. CD-CH1000 FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. IMPORTANT SERVICE NOTES (FOR U.S.A. ONLY) BEFORE RETURNING THE AUDIO PRODUCT (Fire & Shock Hazard) Before returning the audio product to the user, perform the following safety checks. 1. Inspect all lead dress to make certain that leads are not pinched or that hardware is not lodged between the chassis and other metal parts in the audio product. 2. Inspect all protective devices such as insulating materials, cabinet, terminal board, adjustment and compartment covers or shields, mechanical insulators etc. 3. To be sure that no shock hazard exists, check for leakage current in the following manner. * Plug the AC line cord directly into a 120 volt AC outlet. * Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15µF capacitor in series with all exposed metal cabinet parts and a known earth ground, such as conduit or electrical ground connected to earth ground. * Use a VTVM or VOM with 1000 ohm per volt, or higher, sensitivity to measure the AC voltage drop across the resistor (See diagram). * Connect the resistor connection to all exposed metal parts having a return path to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor. VTVM AC SCALE 1.5k ohms 10W 0.15µF TEST PROBE TO EXPOSED METAL PARTS CONNECT TO KNOWN EARTH GROUND All tests must be repeated with the AC line cord plug connection reversed. Any reading of 0.3 volt RMS (this corresponds to 0.2 milliamp. AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the audio product to the owner. SPECIFICATIONS CD-CH1000 ■ Cassette deck ■ General AC 120 V, 60 Hz Frequency response 50-14,000 Hz (Normal tape) Power consumption 175 W Signal/noise ratio 50 dB (recording/playback) Dimensions Width: 7-7/8" (200 mm) Height: 13-7/8" (352 mm) Depth: 14-7/8" (377 mm) Wow and flutter 0.3 % (WRMS) Weight 21.4 lbs. (9.7 kg) Power source ■ Tuner Frequency range ■ Amplifier Output power FM: 87.5-108.0 MHz AM: 530-1,720 kHz 100 watts minimum RMS per channel into 6 ohms from 60 Hz to 20 kHz, 10 % total harmonic distortion Subwoofer: 60 W/ch (60 Hz - 200 Hz, 6 ohms, 10 % T.H.D.) Main: 40 W/ch (200 Hz - 20 kHz, 6 ohms, 10 % T.H.D.) CP-RW5000 Output terminals Speakers: 6 ohms Headphones: 16-50 ohms (recommended; 32 ohms) Input terminals Auxiliary: 500 mV/47 kohms Type 3-way type speaker system 2" (5 cm) Tweeter 5-1/4" (13 cm) Woofer 5-1/4" (13 cm) Subwoofer ■ CD player Type 6-disc multi-play compact disc changer player Signal readout Non-contact, 3-beam semiconductor laser pickup D/A converter 1-bit D/A converter Frequency response 20 - 20,000 Hz Dynamic range 90 dB (1 kHz) Maximum input power (Total) 200 W Rated input power (Total) 100 W Impedance 6 ohms Dimensions Width: 8-1/4" (210 mm) Height: 15-7/16" (392 mm) Depth: 13-9/16" (345 mm) Weight 11.2 lbs. (5.1 kg)/each Specifications for this model are subject to change without prior notice. –2– CD-CH1000 CD-CH1000 NAMES OF PARTS ■ Front panel 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. Cassette Compartment Volume Up/Demo Button Volume Down Button Timer Set Indicator Power Button CD Direct Play Buttons (with Indicator)/ CD Eject Buttons Disc Trays Headphone Jack Control Panel Open/Close Button CD Play Mode Select Button Equalizer Mode Select Button Extra Bass Button Display Button Menu Button Jog Dial Enter Button CD Button Tape Button Tuner (Band) Button Auxiliary Button Tape Record Pause Button Clear Button Memory Button Tuning Down/ Fast Reverse Button (with Indicator) Stop Button (with Indicator) Tuning Up/ Fast Forward Button (with Indicator) CD Play or Pause/ Tape Play Button (with Indicator) 1 2 3 4 5 6 8 21 17 18 19 20 22 23 24 25 27 14 15 16 9 1 2 3 4 5 6 7 Function Indicator Extra Bass Indicator Random Play Indicator Memory Indicator Total Indicator Remain Indicator Timer Play Indicator CD Indicators Cassette Indicator Sleep Indicator Timer Recording Indicator All Disc Play Indicator Level Meter FM Stereo Mode Indicator CD Repeat Indicator CD Pause Indicator CD Play Indicator FM Stereo Indicator 15 16 17 18 10 11 12 13 14 1 3 2 4 ■ Rear panel 01. 02. 03. 04. 26 8 ■ Multi-function LCD display 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 9 10 11 12 13 7 FM/AM Antenna Jack Auxiliary Input Jacks Speaker Terminals AC Power Cord –3– CD-CH1000 CD-CH1000 ■ Remote control 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Remote Control Transmitter Tuner (Band) Button CD Button Auxiliary Button CD Direct Play Buttons Memory Button Clear Button Fast Reverse/Preset Down Button Enter Button Stop Button Menu Button Control Panel Open/Close Button Tape Button Power Button Time Button FM Stereo Mode Button Display Button Dimmer Button CD Play Mode Select Button Fast Forward/Preset Up Button CD Play or Pause/Tape Play Button Tape Record Pause Button Equalizer Mode Select Button Extra Bass Button Volume Up or Down Buttons 1 13 2 14 3 15 4 16 5 17 6 18 7 19 8 20 9 21 10 22 11 23 12 24 25 CP-RW5000 01. 02. 03. 4. 5. 6. Tweeter Woofer Bass Reflex Duct Subwoofer Subwoofer Terminals Main Speaker Terminals 1 4 2 5 3 –4– 6 CD-CH1000 Setting the Clock OPERATION MANUAL 5 Turn the jog dial to adjust the hour and within 2 minutes, press the ENTER button. ● When the 12-hour display is selected, “AM” will change automatically to “PM”. 6 Turn the jog dial to adjust the minutes and within 2 minutes, press the ENTER button. ● The hour will not advance even if minutes advance from “59” to “00”. ● The clock starts from “0” second. (Seconds are not displayed.) The time display will disappear after a few seconds. In this example, the clock is set for the 12-hour (AM12:00) display. 1 2 3 Press the POWER button to turn the power on. Press the MENU button. To confirm the time display: Press the DISPLAY button. The time display will appear for about 3 seconds. Turn the jog dial to select “CLOCK” and within 10 seconds, press the ENTER button. Note: The “CLOCK” will appear or time will flash at the push of the DISPLAY button when the AC power supply is restored after a power failure or after unplugging the unit. Reset the clock as follows. 4 Turn the jog dial to select the 12-hour or 24-hour display and within 2 minutes, press the ENTER button. To reset the clock: Perform “Setting the Clock” from the beginning. At this time, step 4 (for selecting the 12-hour or 24-hour display) will be skipped. “AM 12:00” → The 12-hour display will appear. (AM 12:00 - PM 11:59) “AM 0:00” → The 12-hour display will appear. (AM 0:00 - PM 11:59) “0:00” → The 24-hour display will appear. (0:00 - 23:59) To change the 12-hour or 24-hour display: Clear all the programmed contents. [Refer to “If trouble occurs (reset)” on page 30 for details.] Perform “Setting the Clock” from the beginning. Remote Control Troubleshooting Chart (continued) ■ Test of the remote control ■ If trouble occurs (reset) Face the remote control directly to the remote sensor on the unit. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. The remote control can be used within the range shown below: Press the POWER button. Does the power turn on? Now, you can enjoy the music. If such a problem occurs, do the following: 1. Press the POWER button to enter the power stand-by mode. 2. While pressing down the VOLUME button, press the POWER button until “ALL CLEAR” appears. Remote sensor Caution: This operation will erase all data stored in memory including clock and timer settings, and tuner and CD presets. 8" - 20' (0.2 m - 6 m) ■ Before transporting the unit Remove all CDs from the unit. Your unit checks whether there are any discs inside the unit when the tray is closed. “CD NO DISC” appears if no disc is left. Then, set the unit to the power stand-by mode. Carrying the unit with discs left inside can damage it. –5– CD-CH1000 ,, ,, , 1 Accessories Accesorios Remote control × 1 Controlador remoto × 1 Blue Azul Red Rojo Black Negro Black Negro Speaker wire for MAIN terminals × 2 Cable del altavoz para los terminales MAIN × 2 FM/AM loop antenna × 1 Antena de FM/cuadro de AM × 1 2 System Connections 3 Battery installation ,,, ,, ,,, ,,, ,,, ,,,,, ,,, , ,,, ,,,,, ,,, ,,,,, ,,, ,,,,, Conexiones del sistema FM antenna Antena de FM Right speaker Altavoz derecho Left speaker Altavoz izquierdo Black Negro Extraiga la cubierta de las pilas. 2 Insert the batteries. Red Rojo Inserte las pilas. AC outlet (AC 120 V, 60 Hz) A un tomacorriente de CA (120 V de CA, 60 Hz) Right speaker Altavoz derecho 4 Setting the clock Ajuste del reloj Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. Use dos pilas del tamaño“AA” (UM/SUM-3, R6, HP-7 o equivalentes). Las pilas no están incluidas. 1 Remove the battery cover. AM loop antenna Antena de cuadro de AM Blue Azul Speaker wire for SUBWOOFER terminals × 2 Cable del altavoz para los terminales SUBWOOFER × 2 Left speaker Altavoz izquierdo 3 Replace the cover. Vuelva a colocar la cubierta de las pilas. In this example, the clock is set for the 12-hour (AM12:00) display. En este ejemplo, el reloj está ajustado para la visualización de 12 horas (AM12:00). 1 Press the POWER button to turn the power on. Pulse el botón POWER para conectar la alimentación. 2 Press the MENU button. Pulse el botón MENU. 3 Turn the jog dial to select “CLOCK” and within 10 seconds, press the ENTER button. Gire el mando de lanzadera para seleccionar "CLOCK", y antes de transcurrir 10 segundos, pulse el botón ENTER. 4 Turn the jog dial to select the 12-hour or 24-hour display and within 2 minutes, press the ENTER button. Gire el mando de lanzadera para seleccionar la visualización de 12 horas o de 24 horas, y antes de transcurrir 2 minutos, pulse el botón ENTER. “AM 12:00” “AM 0:00” “0:00” Turn the jog dial to adjust the hour and within 2 minutes, press the ENTER button. 5 When the 12-hour display is selected, “AM” will change automatically to “PM”. Gire el mando de lanzadera para ajustar la hora, y antes de transcurrir 2 minutos, pulse el botón ENTER. The control panel automatically opens when the power is turned on. El panel de control se abrirá automáticamente cuando se conecte la alimentación. Cuando se seleccione la visualización de 12 horas, "AM" cambiará automáticamente a "PM". Turn the jog dial to adjust the minutes and within 2 minutes, press the ENTER button. Gire el mando de lanzadera para ajustar los minutos, y antes de transcurrir 2 minutos, pulse el botón ENTER. 6 –6– CD-CH1000 Listening to a CD (CDs) Audición de un disco CD (CDs) 1 Press the POWER button to turn the power on. Pulse el botón POWER para conectar la alimentación. 2 Press the CD button. Pulse el botón CD. 3 Press the DISC 1 button to open the disc tray 1. Pulse el botón DISC 1 para abrir la bandeja del disco 1. 4 5” (12 cm) 3” (8 cm) Listening to a Cassette Tape Audición de un cassette 2 Press the TAPE button. Pulse el botón TAPE. Place the CD on the disc tray 1, label side up. Coloque el disco compacto en la bandeja del disco 1, con el lado de la etiqueta hacia arriba. 6 You can place discs on the trays 2 - 6 by following the steps 3 - 5. Podrá colocar discos en las bandejas 2 - 6 según los pasos 3 - 5. 7 Press the button to start playback. Pulse el botón para iniciar la reproducción. Listening to the Radio Audición de la radio 1 Press the POWER button to turn the power on. Pulse el botón POWER para conectar la alimentación. 2 Press the TUNER (BAND) button to select the desired frequency band (FM or AM). Pulse el botón TUNER (BAND) para seleccionar la banda de frecuencia deseada (FM o AM). 3 Press the TUNING ( or ) button to tune into the desired station. Pulse el botón TUNING ( o ) para sintonizar la emisora deseada. 4 To receive an FM stereo transmission, press the ST-MODE button on the remote control. The “ST” indicator lights up. Para recibir la transmisión de FM en estéreo, pulse el botón ST-MODE del controlador remoto .Se enciende el indicador “ST”. ST Press the POWER button to turn the power on. Pulse el botón POWER para conectar la alimentación. 3 Press the DISC 1 button to close the disc tray 1. Pulse el botón DISC 1 para cerrar la bandeja del disco 1. 5 1 PUSH EJECT Open the cassette door by pushing the area marked “PUSH EJECT ”. Abra la puerta del cassette pulsando la parte marcada "PUSH EJECT ". 4 Load the cassette into the cassette compartment. Inserte el cassette en el compartimiento del cassette. 5 Press the button to start playback. Pulse el botón para iniciar la reproducción. Recording from the CD Grabación de un disco CD –7– 1 Press the POWER button to turn the power on. Pulse el botón POWER para conectar la alimentación. 2 Press the CD button and load the desired disc. Pulse el botón CD y ponga el disco deseado. 3 Load a cassette into the cassette compartment. Inserte un cassette en el compartimiento del cassette. 4 Press the REC PAUSE button. Pulse el botón REC PAUSE. 5 Press the DISC 1 - DISC 6 button to start recording. Pulse el botón DISC 1 - DISC 6 para iniciar la grabación. CD-CH1000 DISASSEMBLY CD-CH1000 Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling. 4. Take sufficient care on static electricity of integrated circuits and other circuits when servicing. Top Cabinet (A1)x2 ø3x16mm Front Panel Side Panel (Left) (A1)x2 ø3x16mm (A1)x1 ø3x10mm CD-CH1000 PROCEDURE FIGURE 1 Top Cabinet 1. Screw ................ (A1) x5 8-1 2 Side Panel(Left/Right) 1. Screw ................ (B1) x8 8-1 3 Rear Panel 1. Screw ................ (C1) x3 2. Screw ................ (C2) x6 8-2 4 Front Panel 1. Flat Cable .......... (D1) x1 2. Screw ................ (D2) x4 3. Socket ............... (D3) x6 8-2 STEP REMOVAL (B1)x4 ø3x10mm Side Panel(Right) Rear Panel Figure 8-1 5 Sub Trans PWB 1. Screw ................ (E1) x3 2. Socket ............... (E2) x5 8-2 6 Main PWB 1. Flat Cable .......... (F1) x1 2. Screw ................ (F2) x2 3. Screw ................ (F3) x1 4. Socket ............... (F4) x1 8-2 Power PWB/ Speaker PWB 1. Socket ............... (G1) x1 2. Screw ................ (G2) x2 9-1 8 Tape Mechanism 1. Open the cassette holder 2. Screw ................ (H1) x4 9-2 9 CD Switch PWB 1. Socket ............... (J1) x1 2. Screw ................ (J2) x6 3. Hook .................. (J3) x2 9-2 10 Switch PWB 1. Screw ................ (K1) x1 9-2 11 Headphones PWB 1. Screw ................ (L1) x1 2. Bracket .............. (L2) x1 9-2 12 CD Changer door panel/ Control Panel 1. Screw ................ (M1) x3 2. Screw ................ (M2) x2 9-2 7 (B1)x4 ø3x10mm (D1)x1 Power PWB (F3)x1 ø3x8mm Tape Mechanism PWB (D3)x2 Speaker PWB (C1)x1 ø3x10mm Front Panel Main PWB (F4)x1 (C1)x2 ø3x10mm (F2)x2 ø3x10mm CD PWB 13 Motor PWB 1. Solder ................ (P1) x2 9-2 14 CD Changer door panel 1. Screw ................ (Q1) x4 9-3 15 Control Panel 1. Screw ................ (R1) x7 9-3 16 Control PWB 1. Screw ................ (S1) x6 2. Socket ............... (S2) x1 9-4 17 Jog PWB 1. Screw ................ (T1) x6 9-4 18 LED B PWB 1. Screw ................ (U1) x3 9-4 19 Cassette holder Cover 1. Open the cassette holder Cover 2. Screw ................ (V1) x4 3. Display Panel .... (V2) x1 4. Hook .................. (V3) x4 9-5 20 Display PWB/ LED A PWB 1. Screw ................ (W1) x4 2. Hook .................. (W2) x6 9-6 (F1)x1 Rear Panel (D2)x2 ø3x8mm (C2)x6 ø3x10mm Power PWB Speaker PWB Main PWB (E2)x3 (D2)x1 ø3x8mm (E2)x2 Sub Trans PWB (D3)x4 (E1)x3 ø3x8mm (D2)x1 ø3x8mm Figure 8-2 –8– CD-CH1000 Control PWB Control Panel B (G2)x1 ø3x10mm Speaker PWB (G2)x1 ø3x10mm Power PWB Jog PWB (S1)x6 ø2.6x10mm (U1)x2 ø2.6x10mm (G1)x1 (U1)x1 ø2.6x10mm Main Chassis (S2)x1 (T1)x6 ø2.6x10mm LED B PWB CD Changer Block LED Holder Figure 9-1 Front Panel Cassette Holder Open Control Panel A (H1)x4 ø3x10mm Figure 9-4 Tape Mechanism (V3)x4 CD Switch PWB (J3)x1 Front Panel Open (J3)x1 (J1)x1 Cassette Holder Cover (V1)x4 ø2.6x12mm (J2)x6 ø3x10mm (M2)x1 ø3x20mm CD Changer Door Panel (P1)x2 Motor PWB (V2)x1 Switch PWB (M1)x3 ø3x10mm (M2)x1 ø3x20mm Headphones PWB (K1)x1 ø2.6x10mm (L1)x1 (L2)x1 ø3x10mm Figure 9-2 CD Changer Door Panel Figure 9-5 (R1)x3 ø2.6x12mm Cassette Holder Cover (Q1)x1 ø2.6x10mm (Q1)x2 ø2.6x10mm (W2)x1 (W2)x4 LED A PWB (W2)x1 (R1)x2 ø2.6x12mm (W1)x4 ø3x14mm (R1)x2 ø2.6x12mm Control Panel Display PWB Figure 9-3 (Q1)x1 ø2.6x10mm Figure 9-6 –9– CD-CH1000 CP-RW5000 CD-CH1000 (CD CHANGER MECHANISM UNIT) STEP REMOVAL PROCEDURE FIGURE STEP 8-1 1 1 Top Cabinet 2 Side Panel(Left/Right) 1. Screw ................ (B1) x8 8-1 3 Rear Panel 1. Screw ................ (C1) x3 2. Screw ................ (C2) x6 8-2 4 Front Panel 1. Flat Cable .......... (D1) x1 2. Screw ................ (D2) x4 3. Socket ............... (D3) x6 8-2 5 CD Changer Mechanism 1. Flat Cable .......... (X1) x1 2. Screw ................ (X2) x2 3. Screw ................ (X3) x5 10-1 6 CD PWB (Note) 1. Screw ................ (Y1) x4 2. Socket ............... (Y2) x4 3. Flat Wire ............ (Y3) x2 10-2 CD Mechanism 1. Screw ................ (Z1) x4 10-2 7 1. Screw ................ (A1) x5 PROCEDURE REMOVAL Woofer/Tweeter/ Sub Woofer 10-3 10-4 10-5 (A1)x1 Note: After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of connector remove to protect the optical pickup from electrostatic damage. CD Changer Mechanism FIGURE 1. Net ................... (A1) x1 2. Front Panel ..... (A2) x1 3. Screw .............. (A3) x4 4. Ring ................. (A4) x1 5. Catching holder (A5) x2 6. Screw .............. (A6) x2 7. Cover ............... (A7) x1 8. Screw .............. (A8) x2 9. Screw .............. (A9) x4 10. Cover ............. (A10) x10 (A2)x1 Driver should be pried away from Speaker Box. Front Side Screw Driver Speaker Box Bottom Side Figure 10-3 (X2)x1 ø3x10mm Speaker Box CD PWB Bottom Side (A7)x1 (X3)x3 ø3x10mm (A5)x2 (X2)x1 ø3x10mm (A6)x2 ø3x10mm (X1)x1 (X3)x2 ø3x10mm (A8)x2 ø3x10mm Main Chassis Figure 10-1 (Y1)x4 ø3x10mm (Y2)x2 (A3)x4 ø4x16mm (A4)x1 (Y3)x1 (Y2)x1 Tweeter Woofer Figure 10-4 (Y3)x1 Speaker Box CD PWB (Z1)x4 ø2.6x10mm Top Side Sub Woofer (Y2)x1 CD Changer Mechanism (A10)x1 (A9)x4 ø4x20mm CD Mechanism Rear Side Figure 10-2 Figure 10-5 – 10 – CD-CH1000 REMOVING AND REINSTALLING THE MAIN PARTS TAPE MECHANISM SECTION Perform steps 1 to 4 and 8 of the disassembly method to remove the tape mechanism. Record/Playback Head How to remove the record/playback and erase heads (See Fig. 11-1) 1. Carefully remove the record/playback head and erase head screws (A1) x 2 pcs. Erase Head (A1)x1 Ø2 x 9mm (A1)x1 Ø2 x 5mm Figure 11-1 How to remove the pinch roller (See Fig. 11-2) 1. Carefully bend the pinch roller pawl in the direction of the arrow <A>, and remove the pinch roller (B1) x1 pc., in the direction of the arrow <B>. Note: When installing the pinch roller, pay attention to the spring mounting position. Pinch Roller (B1)x1 Pull Pinch Roller Pawl Pull <A> <B> Figure 11-2 How to remove the belt (See Fig. 11-3) FF/REW Belt (C2)x1 1. Remove the motor. 2. Remove the main belt (C1) x 1 pc., from the motor side. 3. Remove the FF/REW belt (C2) x 1 pc. Motor Main Belt (C1)x1 Figure 11-3 Motor How to remove the motor (See Fig. 11-4) 1. Remove the belt. 2. Remove the screws (D1) x 2 pcs., to remove the motor. (D1)x2 Ø 2.6 x 5mm Figure 11-4 – 11 – CD-CH1000 FRONT PANEL SECTION (E1)x1 ø2.6x10mm CD Changer Door Panel Perform steps 1 to 4 of the disassembly method to remove the front panel. Gear Box A How to remove the control panel motor (See Fig. 12-1) Control Panel Motor 1. Remove the control panel. 2. Remove the screws (E1) x 6 pcs., to remove the CD changer door panel. 3. Remove the screws (F1) x 2 pcs., to remove the control panel motor. (E1)x3 ø2.6x10mm Gear Box B Control Panel CD Changer Door Panel Gear Box A (F1)x2 ø2x5mm Control Panel Motor (E1)x2 ø2.6x10mm Motor PWB Figure 12-1 CD MECHANISM SECTION (A1) x1 Stop Washer ø2.6 x6mm (A3) x1 (A1) x1 ø2.6 x6mm Perform steps 1 to 7 of the disassembly method to remove the CD mechanism. (See page 10.) How to Remove the pickup (See Fig. 12-2.) 1. Remove the screws (A1)x 2 pcs., to remove shaft (A2)x 1 pc. 2. Remove stop washer (A3)x 1 pc., to remove gear (A4)x 1 pc. 3. Remove the pickup. Pickup CD Mechanism Note: After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of connector remove to protect the optical pickup from electrostatic damage. Shaft (A2) x1 Gear (A4) x1 Figure 12-2 CD Changer Mechanism CD CHANGER MECHANISM SECTION (2)Changer Box, Right (1)Front Top Plate Perform steps 1 to 5 of the disassembly method to remove the CD changer mechanism. (See page 10.) How to Remove the tray motor/main cam motor (See Fig. 12-3.) (2)Changer Box, Left 1. Remove the screws (B1)x 4 pcs., to remove the CD PWB. 2. Remove the (1)front top plate, (2)changer box, left/right and (3)disc trays 1~6. After that, disassemble as shown in the figure. 3. Remove the screws (B2)x 4 pcs. 4. Remove the tray motor and main cam motor. Note: The parts of (1), (2) and (3) correspond to the drawing Nos. 117, 102, 103 and 108 to 113 of the CD change mechanism disassembly drawing. Remove the screws of 117, 102 and 103, and the parts of (1), (2) and (3) will be ready for removal and the screws of the tray motor and main cam motor will be visible. (3)Disc Tray,1~6 (B2)x4 ø2.6x4mm CD PWB (B1)x4 ø3x10mm Main Cam Motor Tray Motor Figure 12-3 – 12 – CD-CH1000 CD CHANGER MECHANISM MAIN BASE PARTS ASSEMBLING/ADJUSTING PROCEDURE Work content Applied part No. 1. Motor assembly (X 2) mounting (screw x 4) Assembly fig. No. 101/129 2. MT idle gear mounting (screw x 1) 125 Fig.14 3. MT system gear assembly 123/124/126/127 Fig.14 4. STB/tray drive system gear and others assembling/ mounting (screw X 3) 137/138/145/146 (153)/147/148 Fig.14 5. Tray big gear assembly 131 Fig.14 6. T.M SW PWB mounting (screw x 3) 7. STB holder assembling Remarks Fig.14 Gear positioning Fig.15 103 Fig.14 8. STB drive gear L/R assembly mounting (screw x 2) 111 (110)/112 (110) Fig.14 9. Tray joint gear R/tray drive gear R assembling 134/136 Fig.15 Gear positioning 10. Tray gear A/B assembling 132/133 Fig.15 Gear positioning 11. Lift gear B/C assembling 143/144 Fig.16 Gear positioning 12. MT idler gear F assembling, mode big gear mounting (screw x 1) 128/142 Fig.16 13. Change box R mounting (screw x 4) 104 Fig.16 14. Lift gear A assembling 142 Fig.16 15. Change box L assembly mounting (screw x 4) 102/130/135 Fig.17 16. Lift cam assembling (shaft inserting) 144 Fig.17 Gear positioning Fig.18 Check/adjustment 17. STB holder height adjusting 18. Top plate F/disc OB LEV. mounting (screw x 6) 180 19. Trays 1 - 6 assembling 191/192/193/194/195/196 Gear positioning Fig.18 20. Top plate R mounting (screw x 6) Fig.19 - CD CHANGER MECHANISM PARTS LIST Part name No. No. Part name 101 MAIN BASE 140 LIFT CAM 102 CHANCE BOX L 141 MODE BIG GEAR 103 STB HOLDER 142 LIFT GEAR A 104 CHANGE BOX R 143 LIFT GEAR B 144 LIFT GEAR C 110 STB DRIVE GEAR A 145 STB GEAR A 111 STB DRIVE GEAR L 146 STB GEAR B 112 STB DRIVE GEAR R 147 STB GEAR C 120 STABILIZER FH 148 STB GEAR D 123 MT IDLER GEAR A 150 LIFT LEVER 124 MT IDLER GEAR B 151 TRAY LOCK LEVER 125 MT IDLER GEAR C 152 DISC OB LEVER 126 MT IDLER GEAR D 153 STB GEAR ANG. 127 MT IDLER GEAR E 128 MT IDLER GEAR F 180 TOP PLATE F 129 MOTOR GEAR 181 TOP PLATE R 130 TRAY DRIVE GEAR F 131 TRAY BIG GEAR 191 TRAY T1 132 TRAY GEAR A 192 TRAY T2 133 TRAY GEAR B 193 TRAY T3 TRAY DRIVE GEAR R 194 TRAY T4 135 TRAY JOINT GEAR F 195 TRAY T5 136 TRAY JOINT GEAR R 196 TRAY T6 137 TRAY GEAR C 138 TRAY IDLER GEAR 134 – 13 – CD-CH1000 112 STB DRIVE GEAR R (ASSY) 148 STB GEAR D 101 MAIN BASE 103 STB HOLDER 124 129 129 123 126 110 STB DRIVE GEAR A 123 Mark position 125 127 145 STB GEAR A 153 STB GEAR ANG. 146 STB GEAR B 147 STB GEAR C 110 STB DRIVE GEAR A 111 STB DRIVE GEAR L (ASSY) 137 138 TRAY GEAR C TRAY IDLER GEAR 131 TRAY BIG GEAR After assembly TRAY BIG GEAR, turn it in the arrow direction. TRAY BIG GEAR ASSEMBLING POSITION 111(/112) (110) STB DRIVE GEAR L(/R) (ASSY) 146 STB GEAR B 147 STB GEAR C 153 STB GEAR ANG. 145 STB GEAR A 137 138 TRAY GEAR C TRAY IDLER GEAR Figure 14 – 14 – 131 TRAY BIG GEAR CD-CH1000 124 129 129 123 126 123 125 127 Mark position * This position becomes the reference (stock) position of the tray. 145 132 TRAY GEAR A 146 147 The hole must align. It must not rotate in contact with the peripheral (hatched) part of 131. 110 133 TRAY GEAR B 111 Direct the recess part (trapezoidal side) of the axis 135 in this direction. 138 137 131 134 136 TRAY DRIVE GEAR R M T SW PWB TRAY JOINT GEAR R Scale: 2 magnifications *2 Scale: 2 magnifications 132 TRAY BIG GEAR SET POSITION 133 The hole must align. *1: To position the axis part of 136, engage it with 138. After assembling 132, assemble 133. *1 *2: When it is aligned as described in *1, the hatched part (low gear-height part of gear) will be positioned in this position. Note: After positioning the tray big gear in the set position, engage these gears. 134 TRAY DRIVE GEAR R 136 TRAY JOINT GEAR R 133 TRAY GEAR B Figure 15 – 15 – 132 TRAY GEAR A CD-CH1000 Mark position (Assemble the mode big gear in this position.) 104 CHANGE BOX R ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, 128 MT IDLER GEAR F 142 LIFT GEAR A Note To assemble the mode big gear, incline it, bring it into contact with the circumference and put the center hole into position since the hatched part of the main base is overlapped with the circumference. 132 133 145 153 146 110 147 144 LIFT GEAR C 137 138 111 143 LIFT GEAR B 134 136 141 MODE BIG GEAR Direct the short tooth toward the center. Scale: 2 magnifications Scale: 2 magnifications MODE BIG GEAR LIFT GEAR A/B/C ASSEMBLING POSITION (A) (B) <Assembling method of lift gear> After setting up the mode big gear in the shown position, engage it with the STB gear A (gear on the lower side) at the position (A), and assemble them, turning it in the arrow direction into the position (B). (The short tooth directs toward the center of the mode big gear.) 142 LIFT GEAR A 141 MODE BIG GEAR 143 LIFT GEAR B Figure 16 – 16 – 144 LIFT GEAR C CD-CH1000 37° Mark position 128 142 LIFT GEAR A 132 133 145 130 TRAY DRIVE GEAR F 146 110 147 111 141 143 TRAY JOINT GEAR F (CHANGE BOX L ASS'Y) ASSEMBLING POSITION LIFT CAM 144 140 LIFT CAM Scale: 2 magnifications Assembling procedure 1. Turn the mode big gear approx. 37 degrees in the arrow direction. 2. Assemble the change box L ass'y. Note: At this time, the tray joint gear F must be located in the position shown in figure. Moreover, the gear must be engaged securely. 3. After assembly, return the mode big gear to the initial position. 4. Assemble the lift cam. Note: At this time, the lift cam must be located in the position shown in figure. 102 CHANGE BOX L Direct the recess part (trapezoidal side) of the axis 135 in this direction. 135 TRAY JOINT GEAR F *2 130 TRAY DRIVE GEAR F 135 TRAY JOINT GEAR F *1: To position the axis part of 135, engage it with 133. *2: When it is aligned as described in *1, the hatched part 140 (low gear-height part of gear) will be positioned in this position. LIFT CAM Since this gear engagement is not visually checked, verify that it does not float when the gear box L is installed. *1 Scale: 2 magnifications During assembly, make the O part visible in this direction. Note: Among 4 ribs on the circumference, one rib alone is provided with O. 130 TRAY DRIVE GEAR F 135 TRAY JOINT GEAR F Figure 17 – 17 – CD-CH1000 180 TOP PLATE F Mark position 142 LIFT GEAR A 132 133 145 130 146 110 147 135 111 141 143 140 144 STB HOLDER HEIGHT ADJUSTING METHOD When the height of STB holder is high, (Decrease the clearance.) When the height of STB holder is low, (Increase the clearance.) Bend this part. 240 OS LEVER Adjusting procedure 1. Turn the mode big gear approx. 37 degrees in the arrow direction. 2. Viewing from the front side of the mechanism, verify that the guide ribs (CHANGE BOX L/R and STB HOLDER)of tray are as tall as each other. 3. If they are not, bend the lever for adjustment. (Refer to the details.) Note: Also apply the same adjustment on the R side. ,, ,, ,, ,, ,, ,, ,, Bend this part to adjust the height of the STB holder. Scale: 2 magnifications Details 180 TOP PLATE F 140 Height of the rib 130 135 Figure 18 – 18 – CD-CH1000 Mark position Be sure to assemble the tray into this position. 191~196 TRAY1~TRAY6 Insert it along the guide of the change box. 142 LIFT GEAR A 132 133 145 ,,,, ,,,, ,,,, 146 110 147 130 TRAY No.1~6 Rear surface: Stamped. Note: During insertion, don't mistake No. 135 111 141 143 140 Rear side 144 Tray installing method: (After adjusting the height of the STB holder) ,, ,, ,, 1. Turn the mode big gear to the mark position to lower the STB holder to the bottom area. 2. From the front side, install the tray. (Securely insert it to the lock position.) 140 TRAY 6 TRAY 5 TRAY 4 TRAY 3 TRAY 2 TRAY 1 130 135 Figure 19 Measure to be taken when a disc cannot be removed due to a mechanism trouble First, remove the mechanism unit section from the set, and check for the state of the disc. (Remove the top plate R if necessary.) <State of the disc> (1) When the disc is in the normal PLAY (chucking) position -> Try to eject the disc by turning the mode big gear/tray big gear manually. * At this time, be sure to adjust the tray's position (height). (2) When the disc is in the normal STOCK position -> Try to eject the disc by turning the tray big gear manually. * At this time, be sure to adjust the tray's position (height). (3) When the disc is not in the normal position -> The tray or disc is not in the normal position. (The tray or disc may catch somewhere.) Remove the TOP PLATE F/DISC OB lever. Unlock the tray lock lever and pull out the tray which is not caught. Move the caught tray or disc and remove the disc. In case of (1) and (2), the mechanism is normal (defective circuit parts, etc.). However, it may stop somewhere. This is the reason why you should try to turn the tray big gear first. In case of (3), either of the big gears does not turn. – 19 – CD-CH1000 ADJUSTMENT MECHANISM SECTION TUNER SECTION • Driving Force Check fL: Low-range frequency fH: High-range frequency Torque Meter Specified Value Play: TW-2412 • AM IF/RF Signal generator: 400 Hz, 30%, AM modulated Over 80 g • Torque Check Frequency Frequency Torque Meter Play: TW-2111 30 to 60 g. cm Fast forward: TW-2231 60 to 120 g.cm Rewind: TW-2231 60 to 120 g.cm • Tape Speed Test Tape MTT-111 Display Setting/ Instrument Adjusting Connection Parts T351 *1 Specified Value Adjusting Point Specified Value Instrument Connection 3,000 ±90 Hz Variable resistor in motor. AM IF 450 kHz 1,720 kHz AM Band Coverage — 530 kHz (fL): T306 *2 1.1 ± 0.1 V AM Tracking 990 kHz 990 kHz T302 *1. Input: Antenna *2. Input: Antenna Speaker terminal *1 Output: Speaker Terminal Output: TP301 • FM RF Signal generator: 1 kHz, 75 kHz dev., FM modulated TAPE MECHANISM Variable Resistor in motor Test Stage Frequency Frequency Display FM Band Coverage — 87.50 MHz FM RF 98.00 MHz (10~30 dB) 98.0 MHz *1. Input: Antenna *2. Input: Antenna Setting/ Instrument Adjusting Connection Parts (fL): T311 *1 1.3 ± 50mV L312 *2 Output: TP301 Output: Speaker Terminal • FM Mute Level (FM ST MODE) Signal generator: 1 kHz, 40 kHz dev., FM modulated Tape motor Adjusting Parts Display Frequency Figure 20-1 ADJUSTMENT POINT 98.00 MHz (26 dBµV) 98.00 MHz VR351*1 Instrument Connection Input:CNP303 Output: Speaker Terminal *1. Adjust so that an output signal appears. MAIN PWB AM Tracking CNP303 FM/AM ANTENNA SOCKET AM Band Coverage fL 15 1 BI960 FM Mute Level CNP303 T302 3 AM 2 GND BF301 1 FM T306 IC301 T311 1 9 VR351 T312 L312 FM Band Coverage fL FM RF 24 13 IC303 FM IF 12 1 T351 R345 AM IF TP301 IC302 Figure 20-2 ADJUSTMENT POINTS – 20 – CF352 CD-CH1000 TEST MODE Outline While the unit is turned off, press the POWER key while holding down the VOLUME-DOWN and PANEL OP/CL keys to enter the test mode selection mode. Then, the unit is started, the panel is opened, and the microcomputer's version/destination/span is displayed. If the following data is entered from the keyboard while in the test mode selection mode, the unit directly enters the specified test mode. This operation is applied to the main unit's keys only. Character display Item Type Version•Destination Auxiliary display 1 2 3 4 V * • 5 6 7 8 : 9 10 Auxiliary display Note * Left adjust in the first line : Number Span Destination Example: V1. 1_W:_9 In the destination display, a destination code (H/W/U/J) is displayed. For the span display, "9" means 9 kHz/50 kHz, and "10" means 10/100 kHz. All pictures will disappear except the characters. By pressing the specific key, you can enter the test mode whose functions are as follows: System CD Tuner Menu display INITIAL SOFT_RESET CD_TEST TUN_PRESET TUNER_TEST Shortcut Key CD1 PLAY CD2 PLAY CD1 EJECT CD4 EJECT CD5 EJECT Model ALL ALL ALL ALL ALL Shipping status setting Soft rest CD test Tuner test frequency preset Tuner test Outline of Test Mode Name Description 1 2 3 Shipping status setting Soft set setting CD test 4 Tuner test frequency preset Tuner preset clear setting Sets up the unit for shipping. Initializes the unit. Performs tests such as the CD mechanism test, hardware test, and constant setting test. Presets the test frequency. 5 Clears all presets. Shipping status setting test mode Purpose: To Set up the unit for shipping. Function: To check the unit for a CD disc, and initialize all functions. Operation: While checking for a CD disc, the test name (INITIAL) is displayed. The initial operation for a CD disc is performed. In this operation, the unit is checked for a CD disc. If a CD disc is found in the unit during the initial operation, "CD* OPEN" is displayed, the tray is opened (only for the disc found first), and the unit is turned on via the CD function normally. If no CD disc is found, the CD mechanism is placed in the chucking status. After the unit is checked for discs, all settings are initialized, "FINISH" is displayed as in the sample display, and data entry is prohibited including data to turn on or off the unit. To exit the test mode The unit returns to the normal operation through reset entry (hard). Table Character display for test mode 1 Character display Item Type Auxiliary display Test mode name CD disc inserted Operation Set-Up Complete Function 1 I C F 2 N D I 3 4 I T * N I 5 I O S 6 7 8 : 9 10 Auxiliary display Note A L P E N H In the destination display, a destination code is displayed. For the span display, "9" means 9 kHz/50 kHz, and "10" means 10/ 100 kHz. – 21 – CD-CH1000 2. Soft reset Purpose: To initialize the unit. Function: To initialize all functions. Operation: "ALL CLEAR" is displayed, all functions are initialized, and the unit is turned on. To exit the test mode When the initialization through soft reset is complete, the unit is turned on. Table Character display for test mode 2 Character display Item Reset operation display Type Auxiliary display Operation 1 2 3 4 A L L 5 6 7 8 : 9 10 Auxiliary display Note C L E A R 3. CD test mode (If this test mode is not activated, refer to CD troubleshooting on page 54.) In the CD test mode, each step can be performed even if the LID-SW is off. However, if you cannot obtain a focus in step 3 or if other kind of error handling starts, you cannot proceed to the following steps. In error handling, press the POWER key to exit the test mode, or press the STOP key to prohibit operations other than returning to step 1. (1) Step 1 mode In the CD test mode, the following display appears, CD initialization is performed, and you are prompted for data. Reset operation display / Operation "CD_TEST" After lighting up for one second "T1___________0:00" The keys you can press here and the resulting operations are as follows: "POWER" ........... The test mode is turned off, the power is turned off, and the unit is placed in the normal standby mode. "FWD" ................ While holding down this key, the pickup moves outward after returning to the innermost track. "REV" ................. While holding down this key, the pickup moves inward after returning to the innermost track. "PLAY" ............... Jumps to step 2. "STOP" ............... Cancelled. "TAPE REC" ...... Jumps to step 5. * While the pickup is moving to the innermost track in the initialization, none of the keys except POWER is accepted. When PUIN SW ON cannot be detected in ten seconds, the unit stops the slide motor and shows the following error code. Then, you can press the POWER key to exit the test mode, or the STOP key to return to step 1. You cannot perform other operations. "E--CD01" (2) Step 2 mode When the "PLAY" key is pressed in the above mode, the laser is turned on. At this time, another operation must not be performed. Display "T2___________0:00" The keys you can press here and the resulting operations are as follows: "POWER" ........... The test mode is turned off, the power is turned off, and the unit is placed in the normal standby mode. "FWD" ................. While holding down this key, the pickup is moved outward. "REV" .................. While holding down this key, the pickup is moved inward. "PLAY" ................ Jumps to step 2. "STOP" ............... Returns to step 1. "TAPE REC" ....... Jumps to step 5. – 22 – CD-CH1000 (3) Step 3 mode Performs focus search and turns on the focus servo. Focus search is repeated until it is brought into focus. Display "T3___________0:00" The keys you can press here and the resulting operations are as follows: "POWER" ........... The test mode is turned off, the power is turned off, and the unit is placed in the normal standby mode. "FF/FWD" ........... While holding down this key, the pickup is moved outward. "REW/REV" ........ While holding down this key, the pickup is moved inward. "PLAY" ................ Jumping to step 4 when a focus is obtained. Otherwise, data entry is prohibited. "STOP" ............... Returns to step 1. "TAPE REC" ....... Jumps to step 5. * You should return to step 1 if it is out of focus after bringing it into focus. (4) Step 4 mode Rotate a disc. Displayed string: "T4___________0:00" The clock display should always be "0:00". The keys you can press here and the resulting operations are as follows: "POWER" ........... The test mode is turned off, the power is turned off, and the unit is placed in the normal standby mode. "FF/FWD" ........... While holding down this key, the pickup is moved outward. "REW/REV" ........ While holding down this key, the pickup is moved inward. "PLAY" ................ Jumps to step 5. "STOP" ............... Returns to step 1. "TAPE REC" ....... Jumps to step 5. * You should return to step 1 if it is out of focus. (5) Step 5 mode Start playback. When the pickup reaches the outermost track, it does not stop. The LCD screen shows the replay time elapsed as in the normal CD playback. Display "T5___________0:00" The keys you can press here and the resulting operations are as follows: "POWER" ........... The test mode is turned off, the power is turned off, and the unit is placed in the normal standby mode. "FWD" ................. While holding down this key, the pickup is moved outward. "REV" .................. While holding down this key, the pickup is moved inward. "PLAY" ................ Canceled. "STOP" ............... Returns to step 1. * You should return to step 1 if it is out of focus. Notes: • In the test mode, TOC IL is not performed. • Only the keys for adjusting the volume are accepted except the keys described 4. Tuner test frequency preset Purpose: To preset a test frequency for an in-factory test. Function: To preset each preset number to the band and frequency shown in Table 24 based on the initial setting for the destination. Operation: To preset the band and frequency shown in the table below and turn the unit on with the following setting. Function Band Tuning mode Call preset number Band's last preset channel X-BASS Preset equalizer Tuner FM monaural Preset call selection Preset number 1 frequency See Table 24 Off FLAT For other functions, the value which was set when the unit was turned off last time is valid (last state). To exit the test mode After the frequency is preset and the set-up is done, the unit is turned on and normal operations start. – 23 – CD-CH1000 Table 24. TEST-TuSet preset frequencies CH BAND 1% 2 3 4 5 6% 7 8 9 10 11-40 Unused channels are indicated with "_". '%' indicates the last channel for each band. All FM bands are preset to FM monaural. U.S.A. FM FM 87.5 MHz FM108.0 MHz FM 90.0 MHz FM106.0 MHz FM 98.0 MHz AM AM 530 kHz AM1720 kHz AM 600 kHz AM1400 kHz AM 990 kHz Extension cable Type 1. 33 Pin extension flat cable, 500mm Part No. QCNWN6931AFZZ CNP1 33 33 33 1 1 1 CNP901 1 33 33Pin extension flat cable QCNWN6931AFZZ CD PWB-C MAIN PWB-A Figure 24 ERROR MESSAGE LIST CD error messages Errors Pickup mechanism error Tray error Changer mechanism error Messages E-CD01 E-CD20 E-CD10 Remarks Slide motor operation error (PU-IN SW detection NG) Tray open/close operation error Changer mechanism operation error TUNER error messages Errors Relation to RDS EON reception impossible PLL UN LOCK Messages WEAK SIG Frequency indicator flashing Remarks When switching to an EON station, it cannot be received due to weak signal. Reception error or PLL control error TAPE error messages Errors You tried to record on a tape removing the recording prevention tabs. TAPE mechanism error Remarks Messages 'PROTECTED' E-TA01 Mechanism initialize abnormal end – 24 – CD-CH1000 NOTES ON SCHEMATIC DIAGRAM • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means pico-farad and the unit of the capacitor without such a symbol is microfarad. As to electrolytic capacitor, the expression “capacitance/withstand voltage” is used. (CH), (TH), (RH), (UJ): Temperature compensation (ML): Mylar type (P.P.): Polypropylene type • Schematic diagram and Wiring Side of P.W.Board for this model are subject to change for improvement without prior notice. REF. NO DESCRIPTION • The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given. 1. In the tuner section, ( ) indicates AM < > indicates FM stereo 2. In the main section, a tape is being played back. 3. In the deck section, a tape is being played back. ( ) indicates the record state. 4. In the power section, a tape is being played back. 5. In the CD section, the CD is stopped. • Parts marked with “ ”( ) are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. POSITION REF. NO DESCRIPTION POSITION NSW1 PICKUP IN ON—OFF SW756 PLAY/PAUSE ON—OFF SW701 POWER ON—OFF SW758 STOP ON—OFF SW705 OPEN/CLOSE ON—OFF SW761 AUX ON—OFF SW710 PANEL OPEN/CLOSE ON—OFF SW762 TUNER ON—OFF SW711 VOLUME DOWN ON—OFF SW763 TAPE ON—OFF SW712 VOLUME UP ON—OFF SW764 CD ON—OFF SW720 CD 1 EJECT ON—OFF SW770 PLAY MODE ON—OFF SW721 CD 2 EJECT ON—OFF SW772 EQUALIZER MODE ON—OFF SW722 CD 3 EJECT ON—OFF SW773 X-BASS ON—OFF SW723 CD 4 EJECT ON—OFF SW774 DISPLAY ON—OFF SW724 CD 5 EJECT ON—OFF SW776 MENU ON—OFF SW725 CD 6 EJECT ON—OFF SW778 ENTER ON—OFF SW730 CD 1 PLAY ON—OFF SWB101 DISC DETECT 1 ON—OFF SW731 CD 2 PLAY ON—OFF SWB102 DISC DETECT 2 ON—OFF SW732 CD 3 PLAY ON—OFF SWB103 DISC DETECT 3 ON—OFF SW733 CD 4 PLAY ON—OFF SWB104 MODE 1 ON—OFF SW734 CD 5 PLAY ON—OFF SWB105 MODE 2 ON—OFF SW735 CD 6 PLAY ON—OFF SWB106 MODE 3 ON—OFF SW750 RECORD PAUSE ON—OFF SWB107 MODE 4 ON—OFF SW751 CLEAR ON—OFF SWB108 MODE 5 ON—OFF SW752 MEMORY ON—OFF SWB109 TRAY 1 ON—OFF SW753 FAST REVERSE ON—OFF SWB110 TRAY 2 ON—OFF SW755 FAST FORWARD ON—OFF TYPES OF TRANSISTOR AND LED 2SA1015 GR FRONT 2SA562 Y 2SB561 C VIEW 2SB562 C 2SC1740 R DTC363 TS KRA102 M E C B KRA107 M (S) (G) (D) KRC102 M (1) (2) (3) KRC104 M KRC107 M KTA1046 Y KTC2026 KTC3194 Y KTC3203 Y KTA1266 GR KTC3199 GR FRONT VIEW FRONT VIEW B C E 2SD2012 – 25 – HLMP1700 K5052C K5052UL L1154GDA 1 2 3 SVC211C SVC348S CD-CH1000 SWITCHING Q351 TUN_L 13 MO/ST 14 L-CH OUT (FM/AM) 12 PHASE VSM TUN_R 15 R-CH OUT A_+B X351 456kHz IC303 LA1832S FM IF DET./FM MPX./AM IF PHASE 11 FM DET 8 18 FM/AM OUT GND 5 16 MPX IN IF OUT 10 17 MPX VCO VCC 9 SWITCHING Q360 D_GND C2B_CE C2B_CL C2B_DO C2B_DI CF351 FM IF STEREO 7 SD 6 CF352 3 2 1 AM IF 19 AM LOW CUT AM IF IN 4 20 VSM 21 AM RF IN T351 22 FM AFC AM IF REG 3 A_+B 23 AM OSC IN AM MIX OUT 2 24 AM OSC OUT FM IF IN 1 +B FM MUTE LEVEL 12 IF IN ST IND 11 13 IO2 MO/ST 10 14 NC MUTE 9 VR351 10K(B) 15 AM IN MW 8 16 FM IN FM 7 17 VDD A_+B 18 PD AM ANTENNA T306 AM OSC. +B SWITCHING CL 5 DI 4 20 AOUT CE 3 21 VSS NC 2 C2B_DO C2B_CL C2B_DI C2B_CE 22 X OUT X IN 1 X352 4.5MHz T312 BAND PASS FILTER 9 8 7 6 5 4 3 2 1 3 BF301 2 1 IC302 LC72131 PLL(TUNER) VT_CK VD303 SVC211C IC301 TA7358AP FM FRONT END T306 Q371 DO 6 IC302 LC72131 VD301 19 AIN CF302 FM IF 10.7MHz 3 2 1 FM IF TP301 Q302 T311 FM OSC. OSC BUFF VD302 SVC211C R-C L-C +B R P L312 FM RF CNP303 3 2 1 3 2 1 FM/AM LOOP AM ANTENNA FM Figure 26 BLOCK DIAGRAM (1/6) – 26 – PB_MUTE l Q507 REC_R-CH Q508 Y X W V U T S R Q O 8 4 7 1 – 2 3 + + – 5 6 VSM D_GND C2B_DO C2B_CL C2B_DI C2B_CE REC_L-CH +B -B NC NC A_GND n TAPE_R m TAPE_L REC_L-CH IC503 NJM4558M MOTOR DRIVER REC_L-CH CD_L L1 12 TUNER_R 14 R2 TUNER TAPE_R 15 R3 DECK L3 10 AUX_R 16 R4 AUX L4 9 18 IC502 RIN – + + – VREF LTRE LBASS LOUT + – 22 LIN – + RTRE IC502 20 RBASS LC75341 ROUT AUDIO R_CH 21 PROCESSOR – + +B AUX_L CD_R A_GND 7 REC_L-CH CD_L 6 5 AUX_R R-CH JK501 AUX IN L-CH 4 CE CLK DI 2 SYSTEM MUTE 1 Q502 R_CH SWITCHING IC102 BA3126N HAED SELECTOR 2 8 3 7 Q501 TAPE_L-CH L-CH 1 TAPE_R-CH 2 A_GND 3 REC_R-CH 4 REC_L-CH 5 REC_MUTE 6 REC_CONT 7 REC_BIAS 8 +B 4 6 REC MUTE Q120 Q119 SWITCHING Q101 CNP102 REC MUTE Q102 M_+10V +B R-CH R-CH L-CH RECORD/ PLAYBACK HEAD CNP101 ERASE 1 M_GND 2 T2_R1 R-CH 3 T2_R2 4 A_GND 5 T2_L2 6 T2_L1 7 1 L-CH 23 2 22 3 21 – 112K + Hich=T1 + 112K – 20 4 5 19 18 IC101 6 7 17 15 8 ALC 10 16 – 56K + Hich=CHROME + 56K – 9 Nor/CrO2 24 1 2 3 4 5 6 7 13 14 RIPPLE Vcc ALC 11 GND 12 Q114 IC101 AN7345K PLAYBACK AND RECORD/PLAY BACK AMP. BIAS OSC. Figure 27 BLOCK DIAGRAM (2/6) – 27 – Q115 SWITCHING Q116 A_+10V A A_GND B C BIAS_GND D TO POWER SECTION 5 L_CH f e d c b a FROM MAIN PWB 9 A_-B A_GND A_+B R_CH A_GND2 Q509 1 i h g VSS 3 CCB INTERFACE 23 VDD 24 TAPE_L LSEL0 8 RSEL0 + – 19 11 – + + – 17 L2 TUNER_L TO MICOM SECTION CD TO MICOM SECTION CD_R 13 R1 ERASE HEAD k j CNS940 AUX_SEL VSM C2B_DO C2B_CE C2B_DI C2B_CL D_GND S-MUTE CD-R_SEL TO MICOM SECTION TO MICOM SECTION CD-CH1000 CD-CH1000 +B 26 LCD DB7 TO CD PWB 9 8 7 6 5 4 3 2 1 41 XT2 42 XT1 T-SOL T-MOTOR DEST_OUT1 A-FP SW CAM SW DEST_OUT2 CD CD CD CD CD C FH C FH C FH A-SW D FH A-SW E LCD-E LCD-RW TUNER CL TUNER DI AVref1 LEVEL_R AVSS KEY 4 KEY 3 KEY 0 KEY 1 KEY 2 AVDD A Vref 0 48 PROTECT VSM 47 SYS STOP CD 81 FH T-SW A 49 SP RLY 50 POWER KEY LEVEL_L 46 JOG-B 50 FH 83 FH T-SW C 82 FH T-SW B 44 REMOCON 45 JOG-A 49 B-FP SW CE CST SW DEST_IN SPAN CD MUTE CLK DATA LCK1 LCK2 43 RESET TUNER DO GND FH_C-SW_B FH_C-SW_A FH_A-SW_E FH_A-SW_D FH_A-SW_C FH_A-SW_B FH_A-SW_A FH_T-SW_A FH_T-SW_B FH_T-SW_C FH FH FH CD P 1 PB MUTE IC901 IX0353AW SYSTEM MICROCOMPUTER 40 VSS 33 32 31 30 29 28 27 26 25 24 23 NC 22 NC 21 20 19 18 17 16 15 14 13 12 11 10 3 REC BIAS 2 REC REC FH A-SW C 38 X2 39 X1 X902 32.768kHz LCD DB4 37 VDD 29 LCD RS 28 POWER RLY 27 N.C. 36 C FUTA OP CNP901 TEST/Vpp 30 LCD R/W 35 C FUTA CL +B X901 8MHz VDD RUN PULSE 34 SYS MUTE LCD DB5 32 TIMER LCD 33 BACK LED CONT LCD DB6 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 31 LCD E 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 7 CD_RES CD_CCE CD_BUCK CD_BUS3 CD_BUS2 CD-RW CD_BUS1 T-MO_REV CD_BUS0 T-MO_FOR CD_L PU-IN A_GND C-MO_REV CD_R C-MO_FOR CD_GND CD_GND CD_+B CD_+B +B +B +B Q901 3 IC905 +B VOL 1 +B IC905 KIA7042AP RESET 2 SOLENOID DRIVER +B 11 11 RUN_PUL +B +B +B CAM-SW +B MOTOR DRIVER Q909 MOTOR +5V CST-SW SIDE-A g h i TO AUDIO SECTION A_GND O Q P X Y U V W T R S d TO AUDIO SECTION Figure 28 BLOCK DIAGRAM (3/6) – 28 – f c b a R CH A_GND A_GND A_+10V A_+10V CD_GND CD_GND CD_+B CD_+B M_GND M_GND M_+B M_+B Q908 L CH 9 8 7 6 5 4 3 2 1 RUN PULSE R_CH A_GND2 L_CH 10 2 PLAY SW SOLENOID 3 +MTR 4 PLAY NC 5 SWITCH NC 6 + 7 M +5V SENSOR 8 – –COM TAPE 9 MOTOR CST_SW 10 11 CASSETTE F_REC SWITCH Q907 C2B_DI C2B_CE C2B_DO C2B_CL S-MUTE D_GND A_+B A_-B 11 1 PB_MUTE CD-R_SEL CD_MUTE VSM AUX_SEL FFC970 1 SOL CD_L 1 Q906 A_GND CD_R +SOL SENSOR OUT CNP970 Q905 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TO AUDIO SECTION TO POWER CNP806 PWB CD-CH1000 +B +B +B IC912 BU2092F INPUT/OUTPUT EXPANDER 18 VDD VSS 1 __ 17 OE DATA 2 16 Q11 CLOCK 3 15 Q10 14 Q9 13 Q8 12 Q7 11 Q6 10 Q5 T-SOL T-MOTOR DEST_OUT1 DEST_OUT2 7 6 5 4 3 2 1 Q1 6 Q723 REC MUTE 99 Q721 SW710, SW730~SW735 +B FH M B- 98 FH M B+ 97 LED_EG LED_1 LED_2 LED_3 LED_4 LED_5 +B FH A-SW A FH A-SW B FH A-SW C FH A-SW D LED754 LED755 83 82 81 SW761~SW764 A_+B KEY2 KEY3 KEY4 D_GND JOG-A JOG-B Q955 Q954 2 +B CNP934 1 2 3 4 5 6 +B 7 1 2 3 4 5 6 7 8 KEY4 KEY3 KEY2 A_+B CNS940 l m j k A_GND 8 7 6 5 4 3 2 1 REC_RCH BI940 REC_LCH 8 7 6 5 4 3 2 1 m TO AUDIO SECTION CNP102 TO POWER PWB Q707 DIMMER A +B IC701 TA7291S LOADING MOTOR DRIVER TO POWER CNP807 PWB PNL_OP D GND D +B SCL SDA Figure 29 BLOCK DIAGRAM (4/6) – 29 – 1 OPEN_SW D_GND CLOSE_SW SW705 MOTOR_+ OPEN/CLOSE P_CONT MOTOR_– PNL_CL CNP701 VLCD 1 VSS 2 VDD 3 4 5 5 IC701 BI950 1 2 3 4 5 6 7 8 9 06 JOG-B JOG-A D_GND LED701 ~ LED709, LED716 ~ LED724 TAPE_L TAPE_R AC_RLY CTL POWER_RLY A_-B FAN PROTECT SP_RLY FAN_CTL SP_DET SP_RLY UN_SW 5V CD_GND CD_+B CD_+B M_GND M_GND M_+B M_+B REC_BIAS REC_CONT REC_MUTE REC_LCH REC_RCH A_GND TAPE_R TAPE_L D_GND D_GND +B 9 10 11 12 13 14 15 BI960 JOG701 JOG DIAL CNP931 A_+B D_+B D_GND REMOCON POW_KEY POW_IND DATA CK LCK 10 KEY1 11 KEY0 3 +B SW770, SW772~SW774, SW776,SW778 +B 1 +B 2 3 4 5 6 7 8 9 D_+B IC913 LED782 SW750~SW753, SW755,SW756,SW758 LEVEL_R 1 LED781 +B CNS770 3 74 75 76 77 78 79 80 +B 11 Q708 LED773~ LED776 7 6 5 4 3 2 1 IC913 KIA7805P VOLTAGE REGULATOR 10 KEY0 +B LED_6 LED_5 LED756 LED757 LED_2 LED_1 CD BUCK 87 CD CCE 86 FH C-SW A 85 FH C-SW B 84 LED_3 CD BUS2 89 CD BUS3 88 LED_4 LED759 CD BUS0 91 LED758 CD RW 93 CD RESET 92 CD BUS1 90 CNS720 A_+B 1 D_+B 2 D_GND 3 REMOCON 4 POW_KEY 5 POW_IND 6 DATA 7 CK 8 LCK 9 KEY1 SW711,SW712, SW720~SW725 Q720 Q722 Q724 CD PICK IN 94 FH A-SW E SW701 POWER Q2 7 Q3 8 Q4 9 +B Q725 FH M A- 96 FH M A+ 95 LCD-E +B VSS 100 S E LCK 4 Q0 5 1 2 3 M MO700 CONTROL PANEL MOTOR LCD720 LCD DISPLAY +B RX701 REMOTE SENSOR LED731 VDD 18 VSS OE 17 DATA SW12 16 CLK LCK SW11 15 NC SW10 14 NC SW9 13 NC SW8 12 NC SW7 11 CD-R_SEL SW5 10 IC702 1 2 3 4 5 6 7 8 9 IC702 INPUT/OUTPUT EXPANDER BU2092F CD-CH1000 Q200 MO200 FAN MOTOR + Q212 JK701 HEADPHONES FAN MOTOR DRIVER M SO201 + Q210 + RY202 + + SP L-CH GND MAIN SP L-CH SP L-CH SO201 GND SPEAKER SP L-CH SUB TERMINALS WOOFER SP R-CH GND SP R-CH SP R-CH GND MAIN SP R-CH Q209 AC POWER SUPPLY CORD AC 120V, 60Hz RY801 F807 5A 125V RY201 M+10V Q211 -B Q206 +B Q205 Q201 1 IC802 KIA7810AP VOLTAGE REGULATOR IC802 7 – 3 4 – 5 -B Q809 6 A_GND M_+10V -B A_+10V A B C D -8V +B FAN_CTL SP_DET SP_RLY UN_SW 5V +B D_GND D_GND AC_RLY CTL 1 NC L-CH A_GND2 R-CH A_GND A_GND A_+10V +B A_+10V +B CD_GND CD_GND CD_+B CD_+B M_GND M_GND M_10V M_10V – 3 2 +B 6 5 4 +B +B 2 Q805 VOLTAGE REGULATOR 7 IC203 + 8 + +B Q202 +B 1 8 +B 3 -B +B +Vcc IC201 STK40271(2Ch) POWER AMP. Out Ch1 Ch1 IC203 KIA4558P OPE AMP. BIAS_GND + 11 Out Ch2 10 –Vcc 9 2 Ch2 – 13 TO DECK SECTION CNP806 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TO MAIN PWB BI960 1 2 3 4 5 6 7 8 CNP807 TO MAIN PWB BI950A Figure 30 BLOCK DIAGRAM (5/6) – 30 – Q810 VOLTAGE REGULATOR D814 D815 D813 D812 +B D805 + 15 12 D806 -B D807 Q806 1 14 Q807 RELAY DRIVER 1 2 3 IC808 IC808 KIA7805AP CONSTANT VOLTAGE REGULATOR F808 2.5A 125V VOLTAGE REGULATOR 2 D804 NC F801 2.5A 125V F804 5A 125V +B HIGH Ch1 – 3 -B +B 5 4 LOW 7 6 D817 Out Ch2 D816 Q204 F803 5A 125V +B F806 4A 125V 8 -B -B 9 F805 4A 125V –Vcc IC202 STK40204(2Ch) POWER AMP. 10 +Vcc 11 Out Ch2 +B + Q203 12 -B Ch2 – 13 MICON +5V TF 14 +B Q207 +B 15 T802 SUB POWER TRANSFORMER T801 MAIN POWER TRANSFOMER Q208 + FOO TRO VREF RFGC TEBC SEL AVDD3 FMO DMO DVSS DVDD TESIN XVSS XI XO XVDD CD/CD-RW_SEL IC2 TC9490F SERVO/SIGNAL CONTROL – 31 – PDO PVDD /UHSO /HSO SBSY SFSY DATA CLCK SBOK DVSS DVDD IPF DOUT AOUT LRCK BCK CNP1 TO MAIN PWB Figure 31 BLOCK DIAGRAM (6/6) IC6 NC NC IC6 TA2147F SERVO PRE AMP. +B C F B A E VREF +5V SWITCHING TRAY SWITCH SWB101 SWB102 SWB103 SWB104 SWB105 SWB106 SWB107 SWB108 SWB109 SWB110 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SBAD 12 TEO 11 TEN 10 TEB 9 SEL 8 LDO 7 MDI 6 TNI 5 TPI 4 FPI 3 FNI 2 VCC 1 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 C F B A E 1/2V +5V TR– TR+ FO+ FO– GND PD VR LD LTOH41M1 TR– ACTUATOR FO– FO+ TR+ + – + – + – + – + – A CAM SWITCH Q4 Q5 DZ2 Q1 Q3 LPF VCC LD MON GND E B F C 1/2VCC PICKUP UNIT MOB2 TRAY MOTOR GND(D) TRAY_A TRAY_B TRAY_C GND(D) CANA_A CANA_B CANA_C CANA_D CANA_E CANB_A CANB_B 13 GVSW 14 VRO 15 FEO 16 FEN 17 RFRP 18 RFIS 19 RFGO 20 RFGC 21 AGCI 22 RFO 23 RFN 24 GND BIAS 1 2 3 4 5 6 7 8 M GND VCC LOADING1 VREFSW BIAS PREVCC POWVCC BIAS + – TR– TR+ FO+ FO– GND PD VR LD SL+ + SL– – 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SP+ + SP– + M 9 8 7 6 5 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 VCC LOADING2 TEZI TEI SBAD FEI RFRP RFZI RFCT AVDD RFI SLCO AVSS VCOF PVREF LPFO LPFN TMAX LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT BIAS DVSS RO DVDD DVR LO DVSS ZDET VSS BUS0 BUS1 BUS2 BUS3 BUCK /CCE /RST VDD POWVCC PREVCC MUTE IC5 BIAS – 49 50 51 52 53 54 NC 55 56 57 58 59 60 61 62 63 +B 64 LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 +B GND PU-IN M CD FUNC TRAY_C TRAY_B TRAY_A CANA_A CANA_B CANA_C CANA_D CANA_E CANB_A CANB_B X1 16.934MHz 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 SWITCHING REGULATOR +B M BUS2 BUS3 BUCK /CCE /RST BUS1 3.3V IC5 BA5939S FOCUS/ TRACKING/ SPIN/ SLED DRIVER – BUS0 GND PU-IN CD_L-CH CD_R-CH CD_GND CD_+B NSW1 PICKUP IN NM1 NM2 SPINDLE SLED MOTOR MOTOR NC NC MOB1 MAIN CAM MOTOR NC 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 NC 13 12 11 10 CD-CH1000 CD-CH1000 AM FM/AM LOOP ANTENNA FM AM SIGNAL FM SIGNAL 1 2 3 CNP303 1 2 3 A C321 100/16 C345 0.022 C346 0.022 0.1V 1.8V Q302 KTC3194 Y OSC BUFF C318 100P(CH) C T311 T312 FM IF VD303 SVC211C C2B_DO R371 R399 10K 0V 4.7V D R373 1K 4.7V 4.7K Q371 KTA1266 GR SWITCHING R374 1K C311 100P(CH) C312 100P (CH) C382 15P(CH) C310 100P (CH) R372 1K D352 DS1SS133 VDD 17 C397 L351 100µH 9.2V 11 ST IND IF IN 12 0V R376 1K 3 CF302 FM IF 10.7MHz R323 68K R378 82K +B R351 5.6K C351 0.022 L353 1mH C352 10/50 2V 1 FM IF IN AM OSC OUT 24 3V 4.6V 4.6V 2 AM MIX OUT AM OSC IN 23 2V REG C350 0.047 +B 3 CF352 1 C370 1/50 +B R391 390 DZ351 DZ5.1BSB +B C355 22P (CH) C364 4.7/50 C365 0.022 C366 0.001 C367 R350 1/50 2.7K 4.7V 7 STEREO R353 CF351 270 2.5V 8 FM DET FM IF C399 X351 0.022 4.6V 2.1V 456kHz 9 VCC MPX VCO 17 C398 R356 100/16 2V 1K 3.9V C356 0.001 C357 2.2/50 +B C395 0.022 VSM A_+B TUN_L A_GND TUN_R C319 0.1 L352 100µH C2B_DI C2B_DO C2B_CL C2B_CE D_GND R389 3.9K C396 100/16 TO AUDIO SECTION P33 10-A E F G H I J K L M N C354 0.022 C363 0.022 IC303 LA1832S AM LOW 2.3V 4 AM IF IN CUT 19 2.1V 3 R352 0V FM/AM 18 5 GND OUT C353 1K 4.7V 6 SD 0.022 2 +B 2V C343 33P (CH) C361 0.022 2.4V 0.3V AM RF IN 21 VSM 20 0V FM AFC 22 AM IF R358 8.2K C362 3.3/50 T351 AM IF +B F FM MUTE LEVEL VR351 10K(B) R393 1K IC302 LC72131 PLL(TUNER) R392 390 C331 0.047 C342 0.022 C386 330P (CH) +B C332 0.022 R336 10K R377 47K R395 47K VD301 SVC348S C380 10/50 10 MO/ST IO2 13 R360 4.7K C330 15P(UJ) C334 15P(UJ) 1 2 T302 AM ANTENNA C339 100P (CH) C387 0.022 2.3V 7 FM FM IN 16 8 MW AM IN 15 0V 4.1V C385 9 MUTE NC 14 0.01 3.6V 4.7V Q360 2SB562 C SWITCHING E 4.7V R379 2.2K 3.5V 10V 10V T306 AM OSC. 2.3V 0.022 1 X IN X OUT 22 R381 0V 2 NC VSS 21 0V 10K 1.3V 0V 3 CE AOUT 20 C393 0V C394 4 DI 1/50 47/16 0V R380 5 CL 1.5K C392 0.8V AIN 19 0.001 4.7V 0.8V 6 DO PD 18 4.7V R383 5.6K R382 150 C323 0.022 AM BAND COVERAGE fL C335 330P(CH) 0.1V C391 R384 47/16 5.6K R385 5.6K D304 DS1SS133 +B C337 0.022 2.3V IC302 D303 DS1SS133 C347 0.022 C381 12P(CH) X352 4.5MHz C338 0.001 +B VT_CK C384 0.001 D302 DS1SS133 R309 10K L342 2.2µH +B D301 DS1SS133 T311 FM BAND COVERAGE fL C324 4P(CH) +B R345 4.7K +B C2B_CE C2B_DI C2B_CL R302 7 2.9V 10 8 3.6V C326 3.6V 9 18P(CH) FM OSC. C327 0.1 C313 22P (CH) TP301 C341 0.1 R311 C305 R313100K 5P(CH) 33K VD302 C325 SVC211C 15P(CH) BAND PASS FILTER R359 1.8K R357 470K 10 IF OUT MPX IN 16 C374 0.015 3.4V C368 11 PHASE 1/50 1.2V R-CH OUT 15 1.2V L-CH OUT 14 PHASE 3.4V MO/ST 13 3.6V 12 (FM/AM) C371 R355 C358 1/50 1/50 R361 18K 3.3K C373 0.015 R363 1.2K IC303 LA1832S FM IF DET./FM MPX./AM IF G R364 1.2K R354 3.9K 2 1 SWITCHING 3 Q351 KRC104M R370 1K MAIN PWB-A(1/3) H • NOTES ON SCHEMATIC DIAGRAM can be found on page 25. 1 2 3 AM TRACKING fL R369 820 0.8V R327 33 C304 0.01 C306 0.001 1 2 BF301 3 C303 10P(CH) 1 0.8V 2 1.6V 3 3.6V 4 1.6V 5 0V 6 3.6V R362 C372 18K 1/50 B L312 R325 47K C317 0.001 C390 0.001 FMRF C308 5P(CH) C309 0.001 +B R322 680 C389 0.001 D305 DS1SS133 D306 DS1SS133 C316 0.1 R314 22 C314 0.0047 C315 0.0047 IC301 TA7358AP FM FRONT END D310 DS1SS133 D311 DS1SS133 D312 DS1SS133 C301 0.001 4 Figure 32 SCHEMATIC DIAGRAM (1/11) – 32 – 5 6 CD-CH1000 TO TUNER SECTION P32 1-G TUN_L A_GND TUN_R A_+B C2B_CE C2B_DI C2B_CL C2B_DO D_GND L M N K H E G F I C562 0.1 C599 0.001 CHASSIS GND J MAIN PWB-A (2/3) VSM JK501 AUX IN L-CH R-CH D508 DS1SS133 D507 DS1SS133 R550 39K R549 39K L502 2.2µH R547 2.2K R548 2.2K C573 2.2/50 R591 47K R592 47K C574 2.2/50 Y AUX_SEL X VSM W C2B_DO V C2B_CE U C2B_DI T C2B_CL S D_GND R S-MUTE Q CD-R_SEL P CD_MUTE O PB_MUTE NC S-MUTE +B R526 1K C529 10/50 5V R528 C510 2.2K 10/50 C512 5V 0.1 (ML) C514 R530 10V 0.1(ML) 3.9K C516 0.0027(ML) 5V R532 R534 5V 3.9K 3.9K C518 1/50 5V C520 1/50 AUX_R 5V C522 1/50 TAPE_R 5V C524 1/50 TUNER_R 5V C526 CD_R 1/50 5V C528 1/50 12 Q508 0V DTC363 TS 0V 2 0V 3.6V 1 3 3.6V IC502 LC75341 AUDIO PROCESSOR CD L1 TUNER 11 8.2V 4 5 + 7 R542 6 – 0V 1.5K 0V IC503 C550 R541 +B 22/50 8 10V 1.5K 0V 2 – 1 + C551 3 0V 22/50 0V R539 C533 10K 47P C531 (CH) 100P(CH) C535 0.1 +B R537 1K 10 L2 9 DECK AUX L4 8 L3 LSEL0 LIN 7 R540 10K 0V R551 47K 5V 5V C511 0.1 C513 0.1(ML) C515 R529 3.9K 0V C509 10/50(ML) 6 5V 5 4 R533 0.0027(ML) 3.9K 5V R531 C517 3.9K 1/50 5V C519 AUX_L 1/50 5V C521 5V TAPE_L 1/50 C523 5V TUNER_L 1/50 C525 5V 1/50 VSS LOUT LBASS LTRE CCB INTERFACE 3 IC502 LC75341 C534 47P(CH) 13 C527 1/50 R3 14 R1 15 R2 16 R4 RIN RSEL0 RTRE ROUT RBASS 17 + – VREF 18 -B C536 10/50 C532 100P(CH) 3 0V R552 47K C537 0.1 10V 0V – + VDD CE DI 0V 0V R507 22K R538 1K R525 1K C563 10/50 C564 0.1 – + 2 19 – + 1 20 + – CLK 21 22 – + 23 + – 24 + – R524 1K IC503 NJM4558M MOTOR DRIVER R536 47K +B NC R544 47K R543 47K +B +B PB_MUTE +B 2 1 C566 22/50 R582 22K Q507 DTC363 TS C530 10/50 R535 47K R527 2.2K -B C503 22/50 0V 0V R512 8.2K 2.6V R513 1.2K SWITCHING FM SIGNAL R504 2.2K 0.7V 0V 0V PLAYBACK SIGNAL 0V Q502 Q501 KTC3199 GR KTC3199 GR SYSTEM MUTE RECORD SIGNAL CD SIGNAL +B -B REC_LCH REC_RCH g h i a b c d e f j TO MICOM SECTION P34 4-H TO MICOM SECTION P34 6-H 7 A_GND CD_R CD_L -B 8 9 k TAPE_L TAPE_R A_GND 0.7V R511 8.2K C501 0.001 R503 2.2K R514 1.2K 1 C598 3 2.6V 0.0027 R501 330 L_CH A_GND2 R_CH R502 330 A_+B A_GND A_-B SYSTEM MUTE C597 0.0027 C502 0.001 Q509 KRA107 M CD_L 2 l m n TO MICOM SECTION P35 10-H 10 Figure 33 SCHEMATIC DIAGRAM (2/11) – 33 – 11 12 TO MICOM SECTION P34 5-H L501 2.2µH +B C540 390P C541 390P CD-CH1000 C950 150P (CH) R1031 EX-DATA 1K EX-CLK R1007 1K LCK1 R1008 1K A C958 390P C957 150P (CH) 0V 0V 0V 0V 1.1V 1 2 3 4 5 6 7 8 0V 9 R1141 1K +B +B R1022 47K R1108 10K R1106 10K B R1109 10K R1107 10K R1068 10K R1124 10K R1105 10K +B R908 1K RUN_PUL R907 1K R906 1K SOL R905 1K MOTOR R904 1K LCD-DB4 VPP R921 1K LCK2 R920 1K LCK1 R919 1K EX-CLK R918 1K EX-DATA R917 1K R983 1K CD_MUTE R915 1K R914 1K C2B_CE R913 1K CST-SW R912 1K CAM-SW R911 1K SIDE-B R910 1K SIDE-A LCD-RW R991 1K LCD-DB7 LCD-DB6 LCD-DB5 C936 100P (CH) LCD-RES POWER_RLY +B 11 11 5V 1 IC905 0.2V LCD-E/CDR-CLK (4.6V) 5 0.2 FH A-SW E MD SID MD DSTB TUNER CL 0V MD LOAD SW TUNER DO 4.8V MD-DSCK K-DATA/TX MD-DATA/RX AVref1 5V MD RESET AVSS 0V MD SERCH 0V 0V VSM 0.3V 54 KEY 1 5V TUNER DI 0V 78 FH A-SW C 0.2V 77 FH A-SW D 0.2V 0.2 5 0.2 D901 DS1SS133 R988 1K R987 1K SID R974 1K R945 100 RX TX R927 100 MDDSCK R967 1K C2B_DI R968 1K C2B_DO R969 1K C2B_CL R970 1K LOAD_SWR971 1K DSTB R972 1K R1126 10K R1088 5.6K MDDATA R1087 5.6K R1060 100K R1058 100K SERCH R962 1K RESET R963 1K 1K 1K 1K 1K 1K 1K R1056 10K KEY0 R953 KEY1 R954 KEY2 R955 KEY3 R956 KEY4 R957 LEVEL_LR958 VSM R959 LEVEL_RR960 R1054 10K R1053 10K R1055 R1057 10K 10K KDATA C964 0.1 R1099 47K C1003 +B D902 DS1SS133 1 5V 2 C907 10/50 +B +B -B SOL +B +B 0V 0V Q907 2 KRC107 M 5V RUN PULSE R1133 470 MOTOR DRIVER RUN_PUL +B CAM-SW 11.4V g h i O Q P X Y U V W T R S d TO AUDIO SECTION P33 12-C f c b a R CH A_GND A_GND A_+10V A_+10V CD_GND CD_GND CD_+B CD_+B M_GND M_GND M B CST-SW SIDE-A A_GND L CH +B MOTOR DRIVER 2 3 MOTOR 0V Q909 Q908 R1015 11.3V 1 KRC107 M +B 2SB561 C 820 R1014 100K H 1 2 3 4 5 6 7 8 9 10 11 12 13 TO AUDIO SECTION TO POWER P33 7-H PWB CNP806 P40 1-D • NOTES ON SCHEMATIC DIAGRAM can be found on page 25. 2 0V T-SOL 0 LCD-RW/CDR-DATA (4.8V) 79 FH A-SW B 0.2V 53 KEY 0 5V R_CH A_GND2 L_CH 1 0V C912 47/16 5V +B TO AUDIO SECTION P33 9-H 1 0V T-MOTOR 0V DEST_OUT2 5V VDD 5V B-FP SW 5V A-FP SW 0V CE 5V CST SW 5V CAM SW 0V DEST_IN SPAN CD MUTE 0V CLK 0V LCK1 0V DATA 0V LCK2 LCD DB5 0V TEST/Vpp (2.5V) 5V RUN PULSE 5V 5V 80 FH A-SW A 0.2V 51 AVDD A 5V 52 Vref 0 5V C2B_DI C2B_CE C2B_DO C2B_CL S-MUTE D_GND A_+B A_-B 11.3V 3 L910 47µH 3 R1002 100K C906 0.1 Q906 R1012 KRC107 M 1K 11.3V 3 2 0V R1013 47K IC905 KIA7042AP RESET 0V 9 8 7 6 5 4 3 2 1 R1011 100K 11.3V PLAY SW 3 +MTR 4 PLAY NC 5 SWITCH NC 6 + 7 M +5V SENSOR 8 – –COM TAPE 9 MOTOR CST_SW 10 11 CASSETTE F_REC SWITCH SOLENOID C945 0.1 1K 1K D905 DS1SS133 D906 DS1SS133 R1001 47K Q901 KRC102 M C905 3.3/50 2 3 1 C913 2.2/50 11 10 SP_RLY R1003 4.7K SOLENOID DRIVER 11.4V 0V 1 D910 DS1SS133 CNP970 FFC970 0V 0V 0V (2.5V) D907 DS1SS133 Q905 2SB561 C 1 C916 0.1 C998 22/10 R1046 12K R1125 10K L901 100µH C901 1000/6.3 0V 2 25 LCD DB6 2.8V +B +B 1 2 REC 1 PB MUTE 42 XT1 2V POWER +B F +SOL SENSOR OUT 26 LCD DB7 (1.3V) 50 POWER KEY 5V C903 0.1/50 G 27 N.C. 39 X1 2.3V 0V 3 REC BIAS 5V R946 1K C917 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 0.1 33 TAPE MECHANISM PWB-H 38 X2 2.6V KEY 4 5V R1066 10K CD_RES CD_CCE CD_BUCK CD_BUS3 CD_BUS2 CD-RW CD_BUS1 T-MO_REV CD_BUS0 T-MO_FOR CD_L PU-IN A_GND C-MO_REV CD_R C-MO_FOR CD_GND CD_GND CD_+B CD_+B TAPE MECHANISM ASSEMBLY (1/2) 28 POWER RLY PB_MUTE CD-R_SEL CD_MUTE VSM AUX_SEL 9 8 7 6 5 4 3 2 1 R1065 10K 4 DEST_OUT1 IC901 IX0353AW SYSTEM MICROCOMPUTER 0.8V 37 VDD 5V R943 RES RESET 4.4V 43 1K RX_IN R944 44 REMOCON 5V JOG-A 1K R965 45 JOG-A 5V JOG-B R966 1K 46 JOG-B 5V 1K R947 47 SYS STOP 5V 1K R948 48 PROTECT 5V 1K R995 49 SP RLY 5V 1K CD_L A_GND CD_R E 30 LCD R/W (4.7V) 36 C FUTA OP 0.2V 29 LCD RS (4.5V) R941 40 VSS 330K X902 41 XT2 32.768kHz C941 22P (CH) PROTECT CNP1 P38 1-E 35 C FUTA CL 5V X901 8MHz 0V TO CD PWB 34 SYS MUTE 5V 33 BACK LED CONT 5V R936 1K C942 18P (CH) C943 0.1 R1044 22K 4.4V D GND FH_C-SW_B FH_C-SW_A FH_A-SW_E FH_A-SW_D FH_A-SW_C FH_A-SW_B FH_A-SW_A FH_T-SW_A FH_T-SW_B FH_T-SW_C 0V 33 32 31 30 29 28 27 26 25 24 23 NC 22 NC 21 20 19 18 17 16 15 14 13 12 11 10 R1143 1M 1 CNP901 C904 0.01 FFC901 C902 0.1 R935 1K 32 TIMER LCD 5V R934 1K KEY 3 5V R1036 5.6K R933 1K 5V R1035 5.6K KEY 2 C 31 LCD E (4.6V) R932 1K (0.3V) LCD DB4 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 LCD-E LED-TIMER DIMMER S-MUTE P-CLOSE P-OPEN C995 100P (CH) 3 4 Figure 34 SCHEMATIC DIAGRAM (3/11) – 34 – 5 6 CD-CH1000 C958 390P 7 P ) 0V 0V 0V 0V 1.1V 1 2 3 4 5 6 7 8 0V 9 41 +B VDD 18 5V IC912 BU2092F INPUT/OUTPUT EXPANDER C970 0.1 VSS 0V DATA OE 17 0V R1032 1K SW12 16 CLK 0V R1052 1K LCK SW11 15 2.8V R1051 1K NC SW10 14 0V R1050 1K NC SW9 13 0V R1023 1K NC SW8 12 NC SW7 11 P_CONT R1048 CD-R_SEL SW5 10 LCD_RESET 10K MAIN PWB-A (3/3) DIG_SEL AUX_SEL FAN PNL_OP PNL_CL R1027 10K R1026 10K R1024 10K +B C975 1/50 C974 0.1 C976 0.1 C977 100P(CH) +B C978 100P (CH) CD-R_SEL D951 DS1SS133 FM SIGNAL R906 1K R905 1K R904 1K R902 1K R903 1K R901 1K SOL MOTOR REC_BIAS REC_CONT PB_MUTE +B C914 0.1 PLAYBACK SIGNAL R992 1K FH T-SW B R1088 5.6K R984 1K +B R1087 5.6K R1086 5.6K R1085 5.6K SID R988 1K R987 1K R986 1K R985 1K FH T-SW C R1084 5.6K R1092 5.6K DSTB R1040 10K +B D_+B +B C1001 2.2/50 3 +B 8.6V 3.4V R1139 560K 1V Q955 KTC3199 GR 2 C1004 0.1 R1132 220 0.3V C1007 1/50 0.3V 0V C1003 47/50 IC913 C1005 0.1 C925 1/50 C1006 47/50 +B 1 +B 2 3 RX_IN 4 POWER 5 LED-TIMER 6 EX-DATA 7 EX-CLK 8 LCK2 9 KEY1 10 KEY0 R1113 C1002 D954 12K DS1SS133 LEVEL_R 2.2/50 D953 C1008 R1112 DS1SS133 1/50 12K R1131 220 +B 5V 1 +B R1094 5.6K 1V 3.5V Q954 KTC3199 GR R1138 560K C926 1/50 R1129 4.7K 11 R1072 33K IC913 KIA7805P VOLTAGE REGULATOR JOG-B JOG-A R1082 5.6K R1081 5.6K C999 680P L915 2.2µH 0.2V FH T-SW A 81 FH_T-SW_A FH_T-SW_B FH_T-SW_C LCD-E R1118 1K LCD-RW R1119 1K 5V FH T-SW B 82 R1130 4.7K 0.2V LCD-E/CDR-CLK (4.6V) R994 1K R993 1K 0.2V FH T-SW C 83 74 75 76 77 78 79 80 CD SIGNAL R1028 27K CD_BUS3 CD_BUCK CD_CCE FH_C-SW_A FH_C-SW_B 0.2V FH C-SW B 84 FH A-SW E MD SID 5V C-MO_FOR C-MO_REV T-MO_FOR T-MO_REV PU-IN CD-RW CD_RES CD_BUS0 CD_BUS1 CD_BUS2 R1090 5.6K 0V R996 1K R997 1K 0V FH M B+ 97 R998 1K 0V FH M A- 96 R999 1K 0V FH M A+ 95 R928 1K 5V CD PICK IN 94 R949 1K 5V CD RW 93 R982 1K 0V CD RESET 92 R976 1K 0V CD BUS0 91 R977 1K 0V CD BUS1 90 R978 1K 0V CD BUS2 89 R979 1K 0V CD BUS3 88 R980 1K 5V CD BUCK 87 R981 1K 5V CD CCE 86 R989 1K 5V FH C-SW A 85 R990 1K 0V FH M B- 98 R1089 5.6K 0V T1 RECORD SIGNAL R916 1K REC_MUTE 0V VSS 100 5V REC MUTE 99 R1093 5.6K 0V T-SOL 0V T-MOTOR 0V DEST_OUT2 7 6 5 4 3 2 1 R1071 33K KEY4 KEY3 KEY2 +B +B CNP931 A_+B D_+B D_GND REMOCON POW_KEY POW_IND FROM DATA DISPLAY PWB CNS720 CK P36 6-E LCK KEY1 KEY0 JOG-B JOG-A D_GND 1 2 3 4 5 6 7 KEY4 KEY3 KEY2 A_+B FROM JOG PWB CNS770 P37 7-H CNP934 R1142 2.2 +B +B +B BI960 1 2 3 4 5 6 7 8 BI950 TO POWER PWB CNP807 P40 1-D 6 7 CNS940 8 7 6 5 4 3 2 1 TO POWER PWB CNP102 P42 1-A 8 9 j k R762 6.8K A_GND m R768 2.2 (1/2W) 3V PNL_OP C714 47/16 R763 2.7K LCD-E LCD-RW R1016 10K 0.5V 1V 0V IC701 1V 11.4V 1.3V 0.5V l m REC_RCH 8 7 6 5 4 3 2 1 REC_LCH BI940 R1017 10K 1 2 3 4 5 6 7 8 9 TAPE_L TAPE_R POWER_RLY REC_BIAS REC_CONT REC_MUTE REC_LCH REC_RCH A_GND TAPE_R TAPE_L CD_+B CD_+B M_GND M_GND M_+B M_+B 10 11 12 13 14 15 R1140 2.2 +B IC701 TA7291S LOADING MOTOR DRIVER FAN_CTL SP_DET SP_RLY UN_SW 5V D_GND D_GND AC_RLY CTL A_-B FAN PROTECT SP_RLY +B CNP935A 1 2 3 4 5 6 DIMMER FROM A +B DISPLAY PWB D GND CNS702 D +B P36 6-C SCL SDA CNP933 P-OPEN P-CLOSE 1 2 3 4 5 OPEN_SW CLOSE_SW D_GND MOTOR_+ MOTOR_– P_CONT PNL_CL TO AUDIO SECTION P33 12-H 10 Figure 35 SCHEMATIC DIAGRAM (4/11) – 35 – 11 12 FROM MOTOR PWB CNP741 P37 9-B CD-CH1000 BI703B BI703A DISPLAY PWB-B1 R744 LED724 LED723 LED722 150 +B 1 +B 1 2 2 0.8V LED721 LED720 LED719 LED718 LED717 LED716 R741 150 R743 150 A R727 LED706 LED705 LED704 150 R732 LED709 LED708 LED707 150 LED701 ~ LED709: L1154GDA LED716 ~ LED724: L1154GDA R724 LED703 LED702 LED701 150 +B LED A PWB-B2 Q707 KTC3203 Y 0.2V C716 2.2/50 CNP701 LCD720 LCD DISPLAY 5 +B L703 2.2µH C705 10P 2 3 4 5 C704 10P VLCD 5V VSS 0.1V VDD 5V SCL 3.1V SDA 3.4V 1 R749 1K R748 10K 0.1V 1 R788 82 L704 2.2µH C706 0.022 B R719 1K CNS702 BI702 DIMMER 1 DIMMER A_+B 2 2 A_+10 D_GND 3 3 D_GND VDD 4 4 D_+5 SCL 5 5 SCL SDA 6 6 SDA 1 TO MAIN PWB CNP935A P35 12-G R718 1K C CD SWITCH PWB-B3 +B +B 0V 3 IC702 1 5V 0V C707 100P 1.8V 0.3V 8.8V 8.8V R705 1K SW735 CD 6 PLAY R729 15K D_+B D_GND REMOCON POW_KEY POW_IND 0V 1 2 3 4 5 6 7 8 9 TO MAIN PWB CNP931 P35 12-F 10 11 LED_EG LED_1 LED_2 LED_3 LED_4 LED_5 CNP721 LED_6 LED755 K5052UL LED756 R704 K5052UL 1K SW725 CD 6 EJECT R736 33K 1 2 3 4 5 6 +B LED_5 LED_4 1 2 R735 33K G CNS720 10V 9.8V LED754 R706 K5052UL 1K 1 2 3 BI720 A_+B DATA CK LCK 10 KEY1 11 KEY0 0V 9.8V 10V +B 1 +B 2 3 4 5 6 7 8 9 +B 10V 2 C709 47/25 0V 1K 1K 1K C708 0.022 0V 1 Q720 KRA102 M KRA102 M 0V Q721 Q722 KRA102 M 3 LED757 R703 K5052UL 1K 9.8V LED_2 9.8V LED758 R702 K5052UL 1K 1 2 3 9.8V 0V 1 10V 10V 2 3 LED_3 Q723 KRA102 M 0V 9.8V 3 LED759 R701 K5052UL 1K LED_1 F R713 R714 R715 0V R750 100 1 2 3 +B 10V 2 Q724 KRA102 M E 1 2 3 4 5 6 7 8 9 0V 5V 18 VDD VSS __ 17 OE DATA 0V 16 Q11 CLOCK 0V 15 Q10 LCK 0V Q0 14 Q9 0V Q1 13 Q8 0V Q2 12 Q7 0V Q3 11 Q6 0V Q4 10 Q5 0V LED731 HLMP1700 SW701 POWER 5V Q725 KRA102 M D R747 1K C703 0.022 IC702 INPUT/OUTPUT EXPANDER BU2092F RX701 REMOTE SENSOR R720 6.8K R710 4.7K R707 2.7K R726 2.2K R733 1.8K SW724 SW723 SW722 SW721 SW720 SW711 CD 5 CD 4 CD 3 CD 2 CD 1 VOLUME EJECT EJECT EJECT EJECT EJECT DOWN R721 6.8K SW734 SW733 CD 5 CD 4 PLAY PLAY R728 15K SW732 CD 3 PLAY R711 4.7K R708 2.7K R712 2.2K SW712 VOLUME UP R791 2.7K R723 1.8K SW731 SW730 CD 2 CD 1 PLAY PLAY R792 2.7K SW710 PANEL OPEN/CLOSE H • NOTES ON SCHEMATIC DIAGRAM can be found on page 25. 1 2 3 4 Figure 36 SCHEMATIC DIAGRAM (5/11) – 36 – 5 6 CD-CH1000 BI740B BI740A MOTOR PWB-B7 1 2 3 1 2 3 SW705 OPEN/CLOSE CNS741 BI741 TO MAIN PWB CNP933 P35 12-H 1 2 3 4 5 1 2 3 4 5 OPEN_SW CLOSE_SW D_GND MOTOR_+ MOTOR_– SWITCH PWB-B8 + M – C715 0.1 MO700 CONTROL PANEL MOTOR FM SIGNAL HEADPHONES PWB-B9 TO POWER PWB CNP207 P41 12-B CNS730 BI730 1 2 3 4 JK701 HEADPHONES RA711 150 1 2 3 4 L705 2.2µH RA710 150 CONTROL PWB-B4 LED776 K5052UL R787 1K CNP775 CNS773 2 1 CNS772 BI772 1 1 2 2 3 3 4 4 5 5 6 6 BI771A 4 3 2 1 2 CNP934 R755 1.5K R752 1.2K SW752 SW751 CLEAR MEMORY SW750 RECORD PAUSE R777 8.2K R781 18K SW753 FAST REVERSE 1.3V SW758 STOP SW756 SW755 PLAY/ FAST FORWARD PAUSE << >> >II Q708 KRA102 M R753 1.2K R756 1.5K R759 1.8K R765 2.2K SW764 CD +B +B 7 6 5 4 3 2 1 R773 4.7K R758 1.8K SW761 SW762 SW763 TUNER TAPE AUX CNS770 7 R764 R769 2.2K 3.9K LED_EG LED_1 LED_2 LED_3 LED_4 LED_5 +B P35 12-F +B 3 R761 10V 330 1 BI771B TO MAIN PWB R772 1K LED782 K5052C 10V BI773 >> LED773 L1154GDA LED781 K5052C 1 2 1 2 << LED774 L1154GDA R776 1K LED B PWB-B6 >II LED775 L1154GDA R780 1K 1 2 3 4 7 6 5 4 3 2 1 BI770 R754 1.2K R757 1.5K R760 1.8K R766 2.2K R771 3.9K A_+B KEY2 KEY3 KEY4 D_GND JOG-A JOG-B C713 0.001 SW770 PLAY MODE SW773 SW774 SW772 EQUALIZER X-BASS DISPLAY MODE R779 8.2K R783 18K SW778 ENTER SW776 MENU JOG701 JOG DIAL C712 0.001 8 R775 4.7K 9 JOG PWB-B5 10 Figure 37 SCHEMATIC DIAGRAM (6/11) – 37 – 11 12 CD-CH1000 A B CD SIGNAL C CNP1 5 IC2 TC9490F SERVO/SIGNAL CONTROL 13 C18 R29 100K R30 12 2.2M PDO /HSO /UHSO PVDD 17 5V 1.6V NC 3.3V NC NC 1V 0V C27 0.0047 C21 0.001 1.7V 0.033(ML) TEZI 32 1.7V TEI 31 0.7V SBAD 30 1.7V C22 FEI 29 0.033(ML) 1.7V RFRP 28 1.7V RFZI 27 1.7V RFCT 26 3.3V AVDD 25 1.7V C23 0.01 RFI 24 1.6V C24 SLCO 23 0.0027 0V AVSS 22 1V VCOF 21 1.7V C25 0.01 PVREF 20 3.3V LPFO 19 1V LPFN 18 0V C26 TMAX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 TP1 TP2 TP3 TP4 R25 5.6K R28 47K C20 47P + • The numbers 1 to 17 are waveform numbers shown in page 52. • NOTES ON SCHEMATIC DIAGRAM can be found on page 25. 2 3 RF R32 15K +B 1 R31 10K 0.015 CD PWB-C H C30 47/10 R27 47K C13 0.022 G 6 7 TP10 C51 100/10 0V 1.8V 1.3V 1.7V SEL TEBC RFGC VREF 1.7V TRO FOO 1.7V 15 DVSS SBOK CLCK DATA SFSY 0V SBSY 0V 16 ZDET 0V VSS 0V BUS0 0V BUS1 0V BUS2 0V BUS3 0V BUCK 4.8V /CCE 4.8V /RST 4.8V VDD 5.1V 14 0V 0V DZ1 MTZJ5.1A 17 4 11 TP5 CLCK DATA F C7 100/10 C3 0.022 1 DVSS 0V RO 1.5V DVDD 3.1V DVR 1.5V LO 1.5V DVSS NC TRAY_A CANA_A CANA_B CANA_C CANA_D CANA_E CANB_A CANB_B GND 3.1V XVDD 1.4V XO 1.3V XI 0V XVSS TESIN DVDD DVSS DMO FMO AVDD3 49 50 C4 C6 100/10 51 10/16 52 C5 53 10/16 54 C64 55 NC 0.001 56 1K 57 BUS0 R7 1K 58 BUS1 R8 1K 59 BUS2 R9 1K 60 BUS3 R10 1K 61 BUCK R11 1K 62 /CCE R12 R13 1K 63 64 TP9 1 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 C2 0.022 0.8 C19 0.047 C15 R21 C17 0.047 5.6K 0.047 TP6 1.7V 3.3V C65 0.001 C28 0.022 L 0.8 C29 0.022 C14 0.022 C12 33P X1 16.934MHz R19 1M R17 1K R14 82 TP7 TP8 C16 0.047 0V 3.3V 0V 1.7V +B C1 100/10 C11 33P DOUT 2.6V IPF 0V DVDD 3.3V 9 8 7 6 5 4 3 2 1 R6 120 2.6V NC E C10 0.022 BCK LRCK AOUT CNP901 P34 1-E R92 47K CORE1 R91 47K R18 100 0V 2.6V 0V TO MAIN PWB R16 100 C92 470P C8 0.022 D +B L1 0.82µH 33 CD_+B 32 31 CD_GND 30 29 CD_R-CH 28 27 GND 26 PU-IN 25 CD_L-CH 24 23 BUS0 22 21 BUS1 20 CD/CD-RW_SEL 19 BUS2 18 BUS3 17 BUCK 16 /CCE 15 /RST 14 NC 13 CD FUNC 12 TRAY_C 11 TRAY_B 10 C91 470P 33 C31 220/10 +B FFC901 4 Figure 38 SCHEMATIC DIAGRAM (7/11) – 38 – 5 6 CD-CH1000 C95 100P C94 100P GND(D) CANA_A CANA_B CANA_C CANA_D CANA_E CANB_A CANB_B GND(D) CAMA_A CAMA_B CAMA_C CAMA_D CAMA_E CAMB_A CAMB_B 1 2 3 4 5 6 7 8 R78 8.2K IC5 BA5939S FOCUS/ TRACKING/ SPIN/ SLED DRIVER 0.3V 4V 4V Q5 4V KRA102 M SWITCHING C45 C48 470/10 100/10 R49 1.2K R50 1.2K +B R47 8.6V 0V 7V 8.6V 0V 4.3V 4.3V 0V 0V C46 0.022 8.6V 10K 1.7V 1.7V 4V 4V 4V C38 10/50 C49 0.1 Q1 2SC1740 R R35 1K R36 2.2K R37 33K 24 10 8 IC6 TA2147F SERVO PRE AMP. 2.7V C67 0.001 6 5 4 3 2 1 6 5 4 3 2 1 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 6 5 4 3 2 1 6 5 4 3 2 1 M MOB1 MAIN CAM MOTOR M MOB2 TRAY MOTOR + SP+ SP– – SL+ + SL– PU-IN – GND M NM1 SPINDLE MOTOR M NM2 SLED MOTOR NSW1 PICKUP IN CD MOTOR PWB-E TR+ TR– TR+ FO+ FO– GND PD VR LD FO+ FO– TR– ACTUATOR LTOH41M1 1/2VCC R48 10 C R53 68K R54 R55 R56 R57 C 47K F 68K B 68K A 47K E VREF +5V 1 2 3 4 5 6 7 1 2 3 4 5 6 7 CNP7 CNS7A +B +B + CNP6 CNS6A Q4 KTA1266 GR 1 2 3 4 5 6 7 8 CNP5 CNS5A R52 560 1.5V SWITCHING 9 1 2 3 4 5 6 7 8 + – CNS5B R44 68K TR– TR+ FO+ FO– GND PD VR LD – 1 2 3 4 1 2 3 4 5 6 7 1 2 3 4 5 6 7 F C F B A E 1/2V +5V B A E GND CNS7B 2.3V 1.7V 18 1.7V 19 1.2V 20 2.4V 21 1.1V 22 1.7V 23 0V C39 3.9P 1.7V C41 0.1(ML) R39 R40 10K 100 C36 27P 16 0.8V 17 1.7V R74 8.2K 0.7V SBAD 12 0V TEO 11 1.7V TEN 10 1.7V FEN TEB 9 0V RFRP SEL 8 2.7V RFIS LDO 7 0V RFGO MDI 6 1.7V RFGC TNI 5 1.7V AGCI TPI 4 1.7V RFO FPI 3 1.7V RFN FNI 2 0V GND IC6 VCC 1 1 2 3 4 R73 8.2K R72 10K TE 3.3V C40 0.1(ML) C34 22P BIAS R71 10K C47 100/10 R42 56K 4V 13 GVSW 1.7V 14 VRO 1.7V 15 FEO 1.7V LOADING2 VCC R46 1.2K C43 0.022 C44 220/10 R41 3.3K 8.6V 8.6V 1.7V 1.7V 8.6V 0V 0V 4.3V 4.3V 0V 3 R43 820 C33 0.022 SP+ SP– SL+ SL– PU-IN GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 R45 8.2K TP12 C51 100/10 C32 0.022 IC5 4V 4V 4V 4V 1.7V 1.7V TP14 FE C42 0.0068 2 C50 0.1 LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT BIAS POWVCC PREVCC BIAS VREFSW LOADING1 VCC BIAS LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT MUTE PREVCC POWVCC BIAS 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 CNS6B CNP6A 8.6V +B C37 0.022 L7 0.82µH SWB101 DISC DETECT 1 SWB102 DISC DETECT 2 SWB103 DISC DETECT 3 R38 1K 3.3V DZ2 MTZJ3.9B 220/10 L2 0.82µH CAM SWITCH PWB-G 10K 10K R77 8.2K REGULATOR Q3 2SD2012 FW3 CNP3 1 1 GND(D) TRAY_A TRAY_B TRAY_C 4 4 CNP4 R75 R76 GND(D) 1 TRAY_A 2 TRAY_B 3 TRAY_C 4 8 CNS4 C60 100P SWB104 MODE1 SWB105 MODE2 SWB106 MODE3 SWB107 MODE4 SWB108 MODE5 SWB109 TRAY1 SWB110 TRAY2 8 C97 100P C98 100P C99 100P C96 100P C58 100P C59 100P TRAY SWITCH PWB-F FW2 1 1 4V C93 100P CNP2 MON LD VCC PICKUP UNIT 7 8 9 10 Figure 39 SCHEMATIC DIAGRAM (8/11) – 39 – 11 12 + – + – + – + – + – CD-CH1000 C 10 11 12 13 14 15 D CNP807 1 2 3 4 5 6 7 8 TO MAIN PWB BI950 P35 7-H FAN_CTL SP_DET SP_RLY UN_SW 5V D_GND D_GND AC_RLY CTL -8V Ch1 Out 31V +Vcc 8 0V 0V -30V 30V C234 1/50 4.6V C242 C2 10/50 10/ R256 0.1(1W) R260 1K C240 0.022 0V R258 0V 10K Q204 KTC3199 GR C251 47/50 D204 DS1SS133 R246 820 R261 56K 0V 4.6V 0V Q205 KTC3199 GR Q206 KTC3199 GR -0.2V -0.2V -0.2V R205 56K R209 C205 1K 15P -0.2V R203 820 0V -36V 0V C250 0.022 (ML) 1 +B +B R277 330 +B +B R240 C228 1K 2.2/50 C230 0.15 IC203 R228 8.2K R227 8.2K FR252 R248 R250 100 56K 1K Fusible R262 56K 6 7 0V – + R239 C227 1K 2.2/50 + – 7 0V 6 R241 R236 4 68K 1.8K -8.2V -B C220 C247 C248 0.022 10/50 47/50 R235 1.8K C219 10/50 R234 C222 100K 0.015(ML) R233 100K +B +B + + C215 0.022 0V 0V A_GND2 Q201 KTC3199 GR 0V 0V 5 C238 R215 100/50 22K C236 15P C249 47/25 8 2 C218 100P(CH) 0V 3 C217 100P (CH) 0V 5 C213 0.022 4.6V 4 R278 56K 8.4V R222 4.7K R211 R217 R221 18K 18K 4.7K R201 1K 3 NC C229 0.15 L-CH A_GND2 R-CH A_GND A_GND A_+10V +B A_+10V +B CD_GND CD_GND CD_+B CD_+B M_GND M_GND M_10V +B M_10V C203 47/50 D205 DS1SS133 C232 220P R244 1K 2 +B C214 0.022 C211 0.15(ML) 1 0V Q202 KTC3199 GR R218 C212 R212 18K 0.15(ML) 18K C201 220P D201 DS1SS133 R231 1K 0V 4.6V R225 10K 15 -B 0V CNP806 1 2 3 4 5 6 TO MAIN PWB 7 BI960 8 9 P34 6-H R229 0.22(2W) C209 100/50 0V 4.6V R226 10K IC203 KIA4558P OPE AMP. 14 R223 0.1(1W) R232 1K C216 0.022 B 13 12 FR213 100 Fusible R224 0.1(1W) C204 47/50 C208 0.15 C207 0.15 11 C224 C223 10/50 10/50 FR214 100 Fusible R204 820 -37V 37V 0V R202 1K R206 R210 56K 1K –Vcc 9 10 6 D202 DS1SS133 C206 15P +Vcc 7 8 R220 0.22 (2W) C210 R216 R230 100/50 22K 0.22(2W) 5 R219 0V Ch2 0.22(2W) Out Ch1 Out 4 0V -0.2V C202 220P 3 NC -35V 2 36V 1 -0.2V – A IC202 STK40204(2Ch) POWER AMP. Ch1 Ch2 – + IC201 STK40271(2Ch) POWER AMP. – Ch1 R242 68K R238 68K C226 220P(CH) R237 68K C225 220P(CH) C221 0.015(ML) +B +B +B +B -B +B -B -B 2 +B -B +B +B Q805 KTC2026 11.3V +B C807 0.047 (ML) R806 22K R807 22K C814 47/25 +B G VOLTAGE REGULATOR Q809 2SD2012 17V +B 8.6V 9.2V R803 22K C837 0.022 9.2V 9.8V +B C838 220/16 R820 470 C839 100/16 BI804 +B -B +B +B R836 270 C817 6800/25 LED801 K5052UL 10V 3 IC802 17V 1 2 C815 0.1 C816 0.1 IC802 KIA7810AP VOLTAGE REGULATOR R822 1.5K 17V R837 3.3(1/2W) C840 0.022 C819 470/25 DZ803 MTZJ9.1B Q810 KTC3199 GR R821 470 -B R813 1.5K Q806 KTA1046 Y -9V C820 0.047 R830 100 (ML) C821 100/25 DZ804 MTZJ10B C822 10/50 -B H 1 2 3 4 5 6 R811 17V 3.3(1/2W) +B 1 2 3 4 5 6 1 2 3 4 5 6 -19.5V VOLTAGE REGULATOR -8.3V B C D +B 0V TO DECK SECTION P42 3-A A_+10V A_GND M_+10V BIAS_GND 12V A C810 22/50 F CNS804 CNP805 E +B VOLTAGE REGULATOR -B • NOTES ON SCHEMATIC DIAGRAM can be found on page 25. 1 2 3 4 Figure 40 SCHEMATIC DIAGRAM (9/11) – 40 – 5 6 CD-CH1000 POWER PWB-D1 (1/2) Ch2 -0.2V 0V Q210 KTC3199 GR R284 1K 8.2V R299 3.9K 0V 0V R283 470K C257 10/50 Q212 2SA562 Y +B 0V 0.1V Q209 KTC3199 GR R253 R276 22K R275 22K R270 330(1/2W) D207 DS1SS133 R271 4.7(1/2W) FROM HEADPHONES PWB CNS730 P37 8-C + + - 1 2 3 4 5 6 7 8 C254 3300/63 C255 2200/50 + SP L-CH GND MAIN SP L-CH SP L-CH SO201 GND SPEAKER SP L-CH SUB TERMINALS WOOFER SP R-CH GND SP R-CH SP R-CH GND MAIN SP R-CH BI201B C245 0.1(ML) R272 4.7(1/2W) BI201A C246 0.1(ML) + CNP204 + L202 0.29µH R279 22K C253 3300/63 - L204 0.29µH D208 DS1SS133 1 2 3 4 5 1 2 3 4 L201 0.29µH RY202 R265 4.7 (1/2W) 0.8V C243 0.1(ML) 1 2 3 4 5 6 7 8 SPEAKER PWB-D3 CNP203 1 2 3 4 5 CNS808 BI808 +B F805 4A 125V 1 2 3 4 5 F806 4A 125V -B D817 TS6B04GM C834 0.047 (ML) F803 5A 125V +B1 C832 0.047(ML) CNP803 C831 0.047(ML) 1 2 3 4 5 F804 5A 125V 1 1 2 2 RY801 -B 1 2 3 -B D819 DS1SS133 1 2 3 +B D805 1N4004S D806 1NS4004S C827 0.047(ML) F801 2.5A 125V IC808 KIA7805AP CONSTANT VOLTAGE +B REGULATOR +B R835 56 D802 1NS4004S +B 0.2V RELAY DRIVER Q807 KTC3199 GR R814 100 0.8V R815 47K IC808 3 5.7V 7 AC POWER SUPPLY CORD AC 120V, 60Hz 0V +B C823 100/16 F807 5A 125V T801 MAIN POWER TRANSFOMER C826 0.047 (ML) C825 1000/6.3 C824 0.047(ML) 8 D818 DS1SS133 1 2 +B D812 1N4004S D813 1N4004S 10V 0.7V R834 56 C836 0.0047 TF F808 2.5A 125V D807 D804 1N4004S 1N4004S SUB TRANS PWB-D2 CNP801 D816 TS6B04GM C833 0.047 (ML) FM SIGNAL CNP802 1 2 3 4 5 C830 470/35 9 M SO201 1K C252 2200/50 2.7V L203 0.29µH R254 10K R266 C244 4.7(1/2W) 0.1(ML) 0V 0V 0.8V Q211 KTC3199 GR 2 1 Q200 KRC102 M R269 330(1/2W) R251 10K 1 2 3 4V R273 22K R274 22K RY201 R213 100 2 C200 47/16 CORE801 R268 R267 330(1/2W) 330(1/2W) 1 MO200 FAN MOTOR R200 100 0V FAN MOTOR DRIVER +B CNS200 C258 100/16 CNP207 0V D210 DS1SS133 DZ201 MTZJ5.6B 0V R207 12(1/2W) R281 12(1/2W) +B 8.6V R263 56K 0V +B R264 56K R280 56K 0V R257 10K Q203 KTC3199 GR 0V C256 47/50 D204 DS1SS133 0V D203 DS1SS133 R259 4.6V 1K C239 0.022 R249 R243 1K 1K Q208 D206 KTC3199 GR DS1SS133 4.6V 0V C233 1/50 Q207 KTC3199 GR R255 0.1(1W) R247 C235 56K 15P 4.6V FR251 100 Fusible C242 C241 10/50 10/50 820 R245 C237 100/50 -0.2V 15 14 C231 220P 13 -30V 12 0V 0V -31V –Vcc 9 10 11 0V Ch2 Out – Vcc 8 + (2Ch) MP. D815 1N4004S C835 0.047 (ML) D814 1N4004S T802 SUB POWER TRANSFORMER 10 Figure 41 SCHEMATIC DIAGRAM (10/11) – 41 – 11 12 CD-CH1000 FROM CNS940 P35 9-H MAIN PWB P40 1-F TO POWER SECTION CNP102 A B C D A_+10V A_GND M_+11V BIAS_GND 1 2 3 4 5 6 7 8 REC_CONT REC_BIAS +B C134 47/25 BIAS OSC. Q116 KTC3203 Y 0V 1 C141 1/50 1 0V 11.3V +B 0V 6.8V 13 Vcc GND 12 L104 330µH 0V R148 4.7 0V C133 0.039(ML) C137 0.0082 R143 82 R141 R139 C135 47K 22K 0.047(ML) Q114 SWITCHING 2SA1015 GR 0V C131 4V 0V 14 RIPPLE ALC 11 22/50 3.7V 3.7V R136 10K 0V C130 1/50 C138 0.0033 R109 15K C124 0.022 16 R134 100 R132 1.5K C122 270P R130 R150 1K 6.8K R128 68K +B 0V 15 R138 10K 3.3V C126 22/50 0.5V 17 Nor/CrO2 ALC 10 C125 22/50 18 0V 7 6 19 R124 5.6K 20 C120 1/50 1.9V 21 C112 R120 560P 3.9K R116 R118 56 100K 0.5V 22 C108 C110 C106 330P 0V 0.033 47/25 23 R126 15K R114 1K 0V R135 100 0.5V 8 0V 1 R129 1K R131 6.8K C116 3.3/50 0V C118 0.022 R125 5.6K C119 1/50 1.9V 24 R133 1.5K R149 15K 0V 4 2 C127 0.0033 C121 270P 5 3 R137 10K C129 1/50 9 3.3V IC101 0V C132 220/16 2 IC101 AN7345K PLAYBACK AND RECORD/PLAY BACK AMP. E 11.3V 11.3V R155 33K R156 33K R154 47K R-CH D R153 R147 4.7K 47K +B R144 220 3 0V Q119 DTC363 TS REC MUTE 3 1 Q120 0V DTC363 TS REC MUTE 2 C Q115 KRC104 M 2 +B – 56K + Hich=CHROME + 56K – B – 112K + Hich=T1 + 112K – C140 1/50 3 0V SWITCHING C123 0.022 REC_L-CH REC_MUTE TAPE_R-CH A_GND REC_R-CH TAPE_L-CH A R121 3.9K R119 100K 0.5V 0V C109 330P 0V R115 1K R127 15K C113 560P R117 56 C107 0.033 C111 47/25 IC102 3 4 5 0V 2 R101 1K 3 Q101 KRA107 M R102 2.2K C105 560P R103 C103 2.2K 10/16 0V 0V 0V 0V 2 0V 1 0V F C104 560P 0V L-CH IC102 BA3126N HAED SELECTOR 1 10V R104 5.6K R-CH 6 7 10V 9V 0V 0V 0V 8 9 SWITCHING +B R105 100 SWITCHING Q102 KTC3199 GR L-CH C102 180P T2_L1 POWER PWB-D1 (2/2) T2_L2 ERASE M_GND T2_R1 G T2_R2 A_GND C101 180P 1 2 3 4 5 6 7 CNP101 PLAYBACK SIGNAL 1 2 3 4 5 6 7 RECORD SIGNAL ERASE HEAD R-CH L-CH H • NOTES ON SCHEMATIC DIAGRAM can be found on page 25. 1 2 3 RECORD/ PLAYBACK HEAD TAPE MECHANISM ASSEMBLY(1/2) 4 Figure 42 SCHEMATIC DIAGRAM (11/11) – 42 – 5 6 CD-CH1000 LED A PWB-B2 LED708 LED709 RD LED707 LED706 LED705 LED704 2 LED724 BI703B R732 LED723 LED722 R744 R727 LED718 LED717 LED702 LED703 1 LED721 LED716 R724 R741 LED701 LED720 LED719 R743 WH RD WH DISPLAY PWB-B1 2 C716 1 BI703A 6 R719 R718 L704 BI702 WH GY WH GY WH RD L703 1 R788 C706 C705 C704 CNP701 4 E C B Q707 5 3 2 1 R749 R748 RD WH GY WH GY WH P46 5-A CNP970 6 5 4 3 2 1 5 TO MAIN PWB 1 CNS702 FFC970 11 1 CNP935A TO MAINPWB P46 2-A 1 3 5 7 9 11 2 4 6 8 10 7 TAPE MECHANISM PWB-H LCD720 + COLOR TABLE BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GRAY GY WH(W) WHITE BLACK BK PINK PK SOLENOID TAPE MOTOR TAPE MECHANISM ASSEMBLY(2/2) 8 9 10 Figure 43 WIRING SIDE OF P.W.BOARD (1/9) – 43 – 11 12 CD-CH1000 A CD SWITCH PWB-B3 LED759 SW730 CD1 PLAY SW701 POWER R701 R708 R726 Q725 3 2 1 B SW720 CD1 EJECT R707 RX701 LED758 R711 1 2 3 SW731 CD2 PLAY R702 R710 BI720 R750 C709 LED757 C707 C703 SW732 CD3 PLAY 5 R720 SW723 CD4 EJECT R721 10 9 3 2 1 Q720 SW733 CD4 PLAY R792 IC702 18 15 Q721 CNP721 1 2 3 4 5 6 LED756 R791 11 R714 R715 1 E SW722 CD3 EJECT R713 D SW721 CD2 EJECT R703 1 R747 CNP931 P46 2-A RD WH GY WH GY WH GY WH GY WH GY LED731 TO MAIN PWB CNS720 1 2 3 4 5 6 7 8 9 10 11 1 2 3 1 2 3 Q724 C Q723 C708 LED755 SW734 CD5 PLAY 1 2 3 R728 Q722 SW711 VOLUME DOWN 1 2 3 F SW724 CD5 EJECT R736 R733 LED754 SW735 CD6 PLAY SW712 VOLUME UP SW725 CD6 EJECT R704 R729 R712 R705 COLOR TABLE BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GRAY GY WH(W) WHITE BLACK BK PINK PK G SW710 PANEL OPEN/ CLOSE R735 R723 R706 H 1 2 3 4 Figure 44 WIRING SIDE OF P.W.BOARD (2/9) – 44 – 5 6 CD-CH1000 CONTROL PWB-B4 SW758 STOP JOG PWB-B5 R777 R781 R779 LED773 LED776 R783 SW778 ENTER R773 R764 SW756 PLAY/ PAUSE R769 R758 SW755 FAST FORWARD SW753 FAST REVERSE LED775 JOG701 JOG DIAL LED774 SW776 MENU R755 R752 SW750 RECORD PAUSE R766 R775 R771 SW751 CLEAR SW752 MEMORY SW774 DISPLAY SW772 EQUALIZER MODE SW770 PLAY MODE SW764 CD SW773 X-BASS SW761 AUX R753 SW762 TUNER R754 1 R757 R760 C713 R761 BI773 1 1 1 4 BI770 BI771B 2 1 4 7 CNS772 CNS773 6 5 4 3 2 1 GY WH GY WH GY WH RD 1 2 WH GY WH RD RD WH GY WH RD WH GY WH GY WH RD WH 6 3 2 1 BI771A Q708 R776 R772 R787 R780 C712 BI772 R759 R765 R756 SW763 TAPE 7 6 5 4 3 2 1 CNS770 2 1 CNP755 CNP934 TO MAIN PWB P46 2-A LED782 LED781 LED B PWB-B6 P46 3-A CNP933 TO MAIN PWB 5 4 3 2 1 C715 CNP207 TO POWER PWB P51 7-C SW705 OPEN/ CLOSE CNS741 1 5 1 1 RD WH GY 3 BI741 3 BI740A BI740B MO700 CONTROL PANEL MOTOR SWITCH PWB-B8 CNS730 1 WH 2 WH 3 WH 4 RD MOTOR PWB-B7 7 8 1 BI730 JK701 HEADPHONES RA711 L705 4 RA710 HEADPHONES PWB-B9 9 10 Figure 45 WIRING SIDE OF P.W.BOARD (3/9) – 45 – 11 12 CD-CH1000 TO TAPE MECHANISM PWB P43 11-F FROM JOG PWB P45 11-E CNS770 FROM DISPLAY PWB P43 7-F CNS702 FROM CD SWITCH PWB P44 1-D CNS720 A FROM MOTOR PWB P45 8-F CNP741 TO POWER PWB P51 12-E CNP807 FFC970 1 11 8 7 6 5 4 3 2 1 BI950 B Q905 3 C Q907 R36 C958 R1051 C950 R1023 C714 1 5 9 IC912 15 IC701 7 6 5 4 R763 18 10 3 2 1 R1027 R1050 R768 C936 R364 E CNP933 1 2 3 4 5 R1126 C37 C957 R1141 9 8 R1109 R1105 2 Q908 C901 C999 Q909 R1014 B R1015 C970 C995 C R362 1 E C907 R1035 1 2 3 C912 R1013 C905 Q906 R1012 3 2 1 R1036 1 2 3 C913 L915 D R1108 CNP970 R1003 IC905 R947 R995 L901 R953 R1022 C R954 R946 R1046 R948 CNP931 R1044 R1125 C906 D907 1 2 3 4 5 6 7 8 9 10 11 R1106 10 8 6 4 2 11 9 7 5 3 1 Q901 R1011 D910 3 2 1 D905 R1002 R1053 C945 R1054 R965 R1133 R1107 D906 C904 R1143 R1140 L910 C903 D902 R1066 R966 B D901 1 2 3 4 5 6 7 R1001 R1065 CNP934 R1032 R1052 R1026 R1048 R762 R1142 R1031 R1024 1 2 3 4 5 6 R1068 R977 R996 C1003 CNP901 R997 R928 32 30 28 26 24 22 20 18 16 14 12 10 8 33 31 29 27 25 23 21 19 17 15 13 11 9 6 4 7 2 1 R1090 R1089 R1088 R1087 R1086 R1085 R1084 R1092 R1093 R1094 3 FFC901 TO CD PWB CNP1 P48 3-A H 3 5 3 R1028 1 2 R502 C5 R916 R988 MAIN PWB-A 1 1 Q509 R903 R999 R949 R982 C597 C501 R901 R902 R998 R993 R992 R984 R985 R986 R987 R989 R1118 R1119 R969 R978 R979 R981 R980 81 R974 80 R968 R906 R905 R907 C942 85 R927 R967 R976 90 75 R945 R971 C964 R960 1 100 95 70 R1060 C1002 R904 5 Q501 E C D951 R921 R920 R919 R918 10 IC901 60 R501 R933 15 55 65 R963 R1099 C1008 R1113 R1132 R1072 R1081 R1071 C914 20 45 C916 D954 R914 R911 R915 R970 R1058 C917 R1082 R1040 C926 R1138 Q954 B C E C1005 C1004 R910 R983 R958 R959 R972 R962 R1129 R1139 C925 R1130 R934 35 25 50 51 IC913 3 2 1 R917 31 30 40 C1006 R912 R1007 R932 C941 C998 C1001 R1112 C1007 R1131 G C902 R941 F E C B R935 X902 D953 Q955 R936 X901 R955 R1055 R957 R956 R943 R1056 R1057 E C943 R913 R908 R1008 R1016 R1017 R990 R994 R944 R1124 CNP935A R991 4 Figure 46 WIRING SIDE OF P.W.BOARD (4/9) – 46 – 5 6 CD-CH1000 CNP303 D304 D303 D301 D302 C330 C323 C306 L312 C308 D310 C309 C314 C315 R322 Q302 R311 VD302 R313 C317 C316 C345 C327 C390 C318 C313 C347 C303 C304 C305 C342 C346 R351 CF302 C363 C350 3 2 1 R352 D306 D311 C301 D312 X352 11 10 9 8 7 6 5 4 3 2 1 IC302 R371 R372 C312 C311 R373 R374 C310 D352 R376 R395 R383 R399 C397 12 13 14 15 16 17 18 19 20 21 22 C355 Q360 B C E C380 C389 R384 R379 R393 R377 C384 E C B L351 C387 C382 C341 R382 C391 R385 C392 C385 C381 L352 C393 R380 T351 C398 C394 R345 2 1 D305 3 R381 C319 3 AM 2 GND 1 FM R327 R378 C370 C321 T312 R369 FM/AM ANTENNA BF301 R314 C386 CF351 CF352 R391 R359 R392 C395 C396 DZ351 R389 2 3 C351 C352 C353 R353 C371 1 B C E C338 9 8 7 6 5 4 3 2 1 R309 C356 C354 R361 R325 L342 C373 C374 C358 VD303 C361 12 11 10 9 8 7 6 5 4 3 2 1 R355 R354 C357 R363 C366 C399 R357 R364 R362 C372 C362 IC303 X351 13 14 15 16 17 18 19 20 21 22 23 24 C365 R336 Q351 IC301 R302 C324 3 2 1 Q354 VD301 T311 R358 C368 C343 R356 L353 T302 C331 C335 C339 C332 VR351 TP302 C334 R350 C337 FM MUTE LEVEL C326 C367 T306 R323 BI960 C325 151413121110 9 8 7 6 5 4 3 2 1 C364 R370 TO POWER PWB P51 12-D CNP806 R360 Q371 R550 R548 C540 R592 C541 R549 R547 R591 C521 JK501 AUX IN L-CH D508 IC502 C517 1 33 RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 8 7 6 5 4 3 2 1 CNS940 TO POWER PWB CNP102 P51 12-G 7 8 9 10 Figure 47 WIRING SIDE OF P.W.BOARD (5/9) – 47 – 11 BROWN RD(R) WH GY WH GY WH GY WH RD C976 C978 1 C536 BI940 C974 C551 R551 C533 R531 R541 R537 C519 4 C977 C530 8 C535 C975 C531 R533 R540 IC503 C537 1 5 COLOR TABLE BR R539 C518 R534 R538 2 3 2 1 C550 C532 C534 12 R532 C520 R552 R542 13 C523 C515 Q507 10 8 C599 C525 C562 C513 15 C527 3 2 1 5 R514 R512 5 3 R529 R544 20 C516 R535 R513 C511 C514 Q508 6 4 R-CH D507 C564 R536 R511 003 1 R530 C512 C528 C503 R507 R504 R582 C566 C502 L501 C573 C524 C598 B C E R528 1 2 3 Q509 Q502 C509 C563 24 C526 R503 C597 C501 C510 C529 C522 Q501 E C B R543 R502 R527 R525 R526 R524 L502 C574 12 CD-CH1000 TO MAIN PWB CNP901 P46 6-H FFC901 1 CD PWB-C 33 C49 CNP1 C E C46 R77 TP10 R72 R46 R45 R78 R50 Q4 B C E CNP5 R52 C47 5 24 R40 R53 1 1 2 3 4 5 6 7 8 C32 R55 C43 C44 R56 CNP7 R39 B C E C98 C60 C58 C33 C59 Q1 1 R57 2 3 4 5 6 7 CNP3 4 3 2 1 F 13 8 8 9 10 12 5 7 6 4 FW2 1 FW3 8 G R31 C29 R35 R27 10 20 R37 C36 C34 TP6 IC6 15 C41 C30 R49 TE 3 2 14 15 4 11 1 12 13 C40 C23 C20 TP14 C42 C99 C95 C96 C97 C25 R32 C94 1 2 3 4 5 6 7 8 CNP2 C24 R29 R28 R25 C26 C51 C93 FE R42 C22 C13 1617 TP5 DATA C19 TP12 C45 R48 CLCK C67 R43 R44 20 R30 R47 32 L7 15 TP9 33 32 25 10 D 1 2 3 4 5 6 30 1 C15 35 30 5 C21 40 IC2 25 IC5 TP8 R21 R36 C7 60 64 1 CNP6 C48 45 R41 50 55 C18 C8 10 C27 5 C16 TP7 49 48 17 16 20 R73 C65 C12 C14 R17 C2 17 R74 R19 R10 C3 C6 C5 R9 C64 R11 R18 C11 X1 R13 16 15 L2 C10 C4 R12 DZ1 C C31 C28 R14 R16 C1 R71 R38 C38 R76 C37 R92 R6 R75 C92 R8 R7 C50 Q3 B C E C17 R91 C91 L1 E B Q5 DZ2 CORE1 B 9 11 13 15 17 19 21 23 25 27 29 31 33 8 10 12 14 16 18 20 22 24 26 28 30 32 CNP4 1 2 3 4 7 4 6 RF 3 5 2 C39 1 R54 A SWB110 TRAY2 SWB109 TRAY1 1 SWB107 MODE4 SWB108 MODE5 TRAY SWITCH PWB-F H SWB106 MODE3 SWB104 MODE1 SWB105 MODE2 1 • The numbers 1 to 17 are waveform numbers shown in page 52. 1 2 3 4 Figure 48 WIRING SIDE OF P.W.BOARD (6/9) – 48 – 5 6 CD-CH1000 MOB2 TRAY MOTOR MOB1 MAIN CAM MOTOR CNS4 YL 4 OR 3 RD 2 BR 1 NM2 SLED MOTOR + CNS6B BL GY GY GY GY GY 1 2 3 4 5 6 1 2 3 4 5 6 NM1 SPINDLE MOTOR CNP6A 1 2 3 4 5 6 - CNS6A NSW1 PICKUP IN + 1 2 3 4 5 6 7 8 CNS5B RD GY GY GY GY GY GY GY CNS7A 1 2 3 4 5 6 7 4 - CNS5A 1 2 3 4 5 6 7 8 CD MOTOR PWB-E CNS7B RD WH WH WH WH WH WH 1 2 3 4 5 6 7 PICKUP UNIT SWB103 DISC DETECT3 COLOR TABLE BR SWB102 DISC DETECT2 1 SWB101 DISC DETECT1 RED 7 6 5 4 3 2 1 OR ORANGE YL YELLOW 8 7 6 5 4 3 2 1 GR GREEN CAM SWITCH PWB-G 7 8 9 BROWN RD(R) 10 Figure 49 WIRING SIDE OF P.W.BOARD (7/9) – 49 – BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 11 12 CD-CH1000 SO201 SPEAKER TERMINALS MAIN SUB WOOFER MAIN R-CH GND R-CH GND L-CH GND L-CH GND A SPEAKER PWB-D3 L201 B L202 L204 BI201B 1 8 WH GY WH GY WH GY WH RD L203 AC POWER SUPPLY CORD AC 120V, 60Hz BK WH C 1 2 BL GY WH GY WH RD RD CNS808 5 4 3 2 1 D 2 RD WH GY WH GY CNP801 1 T801 MAIN POWER TRANSFORMER 1 5 BL BI808 T802 SUB POWER TRANSFORMER C836 F806 4A 125V C834 F807 5A 125V E RD RD 1 BL BK BL RD 2 3 4 5 D816 F805 4A 125V F C832 CNP802 4 3 CNS804 2 CNP803 C826 C827 D806 D805 D804 BI804 F801 2.5A 125V 1 2 3 D807 F808 2.5A 125V 1 1 R834 D817 G 3 2 1 5 F803 5A 125V C831 D802 R835 C825 1 2 3 R814 R815 C823 IC808 Q807 BCE C824 D813 D812 D819 D818 C835 D814 C830 F804 5A 125V D815 H YL BK YL C833 RY801 RD WH GY WH GY WH 6 1 2 3 4 5 6 SUB TRANS PWB-D2 1 2 3 4 Figure 50 WIRING SIDE OF P.W.BOARD (8/9) – 50 – 5 6 CD-CH1000 POWER PWB-D1 C231 C203 R234 C225 R237 C221 C226 R233 1 2 3 4 5 6 7 8 R211 C248 C207 8 7 6 5 R221 R235 C213 R277 C229 C219 R227 C211 TO MAIN PWB BI960 P47 8-A C217 C227 R203 C247 IC203 R241 R239 D201 R228 1 2 3 4 CNP806 FR214 C218 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R217 D205 DZ803 R813 C820 BI950A P46 6-A WH PK R144 R134 Q210 Q119 2 1 3 R200 DZ201 1 2 C141 Q120 3 1 2 CNP102 C140 R104 R154 R156 R150 R126 R124 C258 R207 B CE R299 B CE Q212 R130 R129 R127 R137 C131 E C B R153 C200 R283 Q114 C129 C130 C132 IC102 R116 7 6 5 4 3 2 1 C102 CNP101 7 6 5 4 3 2 1 WH BK WH YL BK BL PK BK WH R149 3 2 1 R101 C101 C107 C123 C111 R117 R103 C119 R125 R135 R115 R119 R131 R102 C118 C116 R121 R133 1 C127 C109 C113 2 5 10 12 C121 1 3 C125 4 IC101 5 6 20 15 13 7 24 C138 C108 8 C122 R128 9 R114 R132 C104 R109 C124 C126 C106 R118 R136 R120 C120 C112 C110 R105 L104 R141 R148 C133 R139 C135 C134 E C B Q102 R147 R155 Q101 1 2 3 R138 C137 C105 C103 Q116 E CB Q115 1 2 3 CNP204 Q200 B C E R830 TO MAIN PWB R281 C819 6 5 4 3 2 1 R236 R240 C214 R218 R222 C212 C202 R204 R216 FR213 15 E R225 C B Q205 Q201 BCE R278 ECB C251 Q206 C222 FR251 FR252 R215 R205 C249 R212 CNP807 D204 R258 10 C209 C822 C810 R806 C220 C223 C250 R143 YL BL 5 C821 LED801 C228 R242 C230 C210 C224 C208 R201 C201 C807 C817 CNP805 1 R226 Q806 R837 R811 Q805 C840 R253 C204 D202 R229 C253 DZ804 R822 C839 R821 R820 R836 R209 R231 R223 R261 R243 R202 R279 C837 B C E Q810 E C B C206 C205 R219 R803 Q809 R206 R262 C814 R238 C233 C237 R245 R220 C815 E C B Q202 E C B R230 C254 C816 C838 R224 R232 R210 C242 C241 15 IC201 C257 R807 3 2 1 C216 4 3 2 1 R254 R269 10 D203 R270 C246 E C B Q207 R276 R272 5 C235 B C E C234 C238 R247 Q211 B C E R280 Q208 E C B R284 5 4 3 2 1 CNP203 Q209 R213 R251 D208 R268 RY202 IC802 CNP207 P45 11-G FROM HEADPHONES CNS730 PWB D210 C256 C245 8 R257 R263 R264 C239 EC B R249 R267 R275 C215 RD WH GY WH GY WH GY WH R255 R259 D207 BI201A 1 COLOR TABLE BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GRAY GY WH(W) WHITE BLACK BK PINK PK R246 1 D206 R273 R266 C244 R271 E C B Q204 R274 Q203 RY201 C255 IC202 C236 C240 C252 R250 R260 R256 R244 C232 R248 C243 R265 1 2 3 4 5 6 7 8 CNS200 RD 1 2 BR MO200 FAN MOTOR FROM MAIN PWB CNS940 P47 8-H ERASE HEAD RECORD/PLAYBACK HEAD TAPE MECHANISM ASSEMBLY(1/2) 7 8 9 10 Figure 51 WIRING SIDE OF P.W.BOARD (9/9) – 51 – 11 12 CD-CH1000 WAVEFORMS OF CD CIRCUIT STOP NO DISC FOCUS SEARCH 1 PLAY FOO IC2 33pin 12 2 IC5 2pin 3 TMAX IC2 17pin FO+ 13 SBOK IC2 8pin FO- IC5 1pin 14 DMO IC2 41pin 0.2µs FOCUS SEARCH 0.2µs STOP TOC IL 6 4 TEI IC2 31pin SEL IC2 38pin 5 PLAY 11 TRO IC2 34pin FEI IC2 29pin 6 15 TEI FMO IC2 40pin IC2 31pin 0.2µs 0.2µs STOP 5 PLAY CUE 6 FEI IC2 29pin 7 11 SBAD TRO IC2 34pin IC2 30pin 8 TEI IC2 31pin RFO IC6 22pin 15 FMO IC2 40pin 0.2µs STOP 5 0.2µs PLAY REVIEW 6 FEI IC2 29pin 9 RFGO 11 IC6 19pin 10 TEI IC2 31pin TRO IC2 34pin 15 RFRP FMO IC2 40pin IC6 17pin 0.2µs 0.2µs STOP 6 PLAY TCD-782 TNO-02 PLAYBACK TEI IC2 31pin 16 11 LO IC2 53pin TRO IC2 34pin 7 17 SBAD RO IC2 50pin IC2 30pin 0.2µs 0.2µs – 52 – CD-CH1000 TROUBLESHOOTING When the CD does not function When the CD section does not operate when the objective lens of the optical pickup is dirty, this section may not operate. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check the following items. Remove the cabinet and follow the troubleshooting instructions. "Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attempting any adjustment make certain that the lens is clean. If not, clean it as mentioned below." Turn the power off. Gently clean the lens with a lens cleaning tissue and a small amount of isopropyl alcohol. Do not touch the lens with the bare hand. Dust gradually accumulates on the objective lens during use, and it may degrade performance. To avoid this problem, use a cleaning disc designed for CD optical pickup lenses. HOW TO USE 1. Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the brush on the CD cleaner disc which has the mark next to it. 2. Place the CD cleaner disc onto the CD disc tray with the brush side down, then press the play button. 3. You will hear music for about 20 seconds and the CD player will automatically stop. If it continues to turn, press the stop button. CAUTION The CD lens cleaner should be effective for 30~50 operations, however if the brushes become worn out earlier then please replace the cleaner disc. If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft cloth. Do not drink the cleaner fluid or allow it to come in contact with the eyes. In the event of this happening then drink and / or rinse with clean water and seek medical advice. The CD cleaner disc must not be used on car CD players or on computer CD ROM drives. All rights reserved. Unauthorized duplicating, broadcasting and renting this product is prohibited by law. Cleaner Liquid Cleaning Disc PARTS CODE: UDSKA0004AFZZ – 53 – CD-CH1000 Check in the CD test mode. STEP 1 Does the display "E-CD01" appear? Yes No Does the pickup move to the inner/outer position using the 'UP'/'DOWN' key? Check the line of PU-IN SW. Check from pin 2 of CNP6 via pin 25 of CNP1 to pin 94 of IC901. No Check the line of the slide control. Check from pins 3 and 4 of CNP6 via pins 17, 18 and 22 of IC5 to pin 40 of IC2. No Check from pins 7 and 8 of CNP5 via Q4 and pins 6 and 7 of IC6 to pin 38 of IC2. No Check from pins 3 and 4 of CNP5 via pins 1, 2 and 6 of IC5 to pins 29 and 33 of IC2. Check from pins 1, 3 and 4 of CNP7 to pins 2 and 3 of IC6. Yes STEP 2 Laser ON? Yes STEP 3 Focus search? Yes STEP 4 Focus search? No Check from pins 5 and 6 of CNP6 via pins 19, 20 and 21 of IC5 to pin 41 of IC2. Yes STEP 5 Tracking servo? No Yes RF signal Check from pins 1 and 2 of CNP5 via pins 3, 4 and 5 of IC5 to pins 31 and 34 of IC2. Check from pins 2 and 5 of CNP7 to pins 4 and 5 of IC6. Check from pins 21, 22 and 23 of IC6 to pin 24 of IC2. No Yes AUDIO signal No – 54 – Check from pins 50 and 53 of IC2 to pins 24 and 28 of CNP1. CD-CH1000 FUNCTION TABLE OF IC IC2 VHiTC9490F/-1: Servo/Signal Control (TC9490F) (1/2) Pin No. Function Terminal Name Input/Output 1 BCK Output Bit clock output terminal. 32fs, 48fs or 64fs can be selected by command. 2 LRCK Output L/R channel clock output terminal. L channel: "L", R channel: "H". the output polarity can be inverted by command. 3 AOUT Output Audio data output terminal. MSB/LSB fast can be selected by command. 4* DOUT Output Digital out output terminal. Up to double speed can be output. 5* IPF Output Correction flag output terminal. When the correction impossible symbol appears if the AOUT output corresponds to the C2 correction output: "H". 6 VDD3 — Digital 3.3V power supply terminal. 7 VSS3 — Digital GND terminal. 8 SBOK Output 9 CLCK Input/Output 10 DATA Output Subcodes P-W data output terminal. 11* SFSY Output Playback system frame sync signal output terminal. 12* SBSY Output Subcode block sync output terminal. In the S1 position when the subcode sync is detected: "H". 13 14* /HSO /UHSO Output Output Playback speed mode flag output terminal. . — Subcode Q data CRCC decision result output terminal. When the decision result is OK: "H". Clock input/output terminal for subcodes P-W data reading. The input/output polarity can be selected by command. Playback speed /UHSO /HSO H H Normal speed playback H L Double speed playback L L 4-time speed playback — — — 15 PVDD3 16 PDO Output 3.3V power supply terminal for PLL system. EFM signal/PLCK signal phase error signal output terminal. 17 TMAX Output TMAX detection result output terminal. TMAX detection result TMAX output Longer than the specified period "PVDD3" Within the specified period "Hi-z" Shorter than the specified period "AVSS3" 18 LPFN Input 19 LPFO Output 20 PVREF — 21 VCOF Output Filter terminal for VCO. 22 AVSS3 — Analog GND terminal. 23 SLCO Output 24 RFI 25 AVDD3 26 RFCT Input RFRP signal center level input terminal. 27 RFZI Input Input terminal for RFRP signal zero crossing. 28 RFRP Input RF ripple signal terminal. 29 FEI Input Focus error signal input terminal. 30 SBAD Input Sub-beam addition signal input terminal. 31 TEI Input Tracking error input terminal. Fetch when the tracking servo is on. 32 TEZI Input 33 FOO Output 34 TRO Output 35 VREF — 36 RFGC Output RF amplitude adjustment control signal output terminal. 37 TEBC Output Tracking balance control signal output terminal. 38 SEL Output APC circuit ON/OFF signal output terminal. When the laser is on, UHS="L": "Hi-z", UHS="H": "H" output. Input — Amp's inversion input terminal for PLL system low-pass filter. Amp's output terminal for PLL system low-pass filter. VREF terminal only for PLL system. DAC output terminal for data slice level generation. RF signal input terminal. Zin can be selected by command. Analog 3.3V power supply terminal. Input terminal for tracking error signal zero crossing. Focus equalizer output terminal. Tracking equalizer output terminal. Analog reference power supply terminal. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 55 – CD-CH1000 IC2 VHiTC9490F/-1: Servo/Signal Control (TC9490F) (2/2) Pin No. Function Terminal Name Input/Output 39 AVDD3 40 FMO Output — Feed equalizer output terminal. Analog 3.3V power supply terminal. 41 DMO Output Disc equalizer output terminal. 42 VSS3 — Digital GND terminal. 43 VDD3 — Digital 3.3V power supply terminal. 44 TESIN Input 45 XVSS3 — 46 XI Input 47 XO Output 48 XVDD3 49 DVSS3 50 RO 51 DVDD3 52 DVR 53 LO 54 DVSS3 Test input terminal. Usually "L" fixed. GND terminal for system clock oscillation circuit. System clock oscillation circuit input terminal. System clock oscillation circuit output terminal. — 3.3V power supply terminal for system clock oscillation circuit. — GND terminal for D/A converter. Output R channel data normal rotation output terminal. — 3.3V power supply terminal for D/A converter. — Reference voltage terminal. Output L channel data normal rotation output terminal. — D/A converter section GND terminal. 55* ZDET Output 56 VSS5 — 1-bit D/A converter 0 detection flag output terminal. 57-60 BUS0-BUS3 61 BUCK Input Clock input terminal for microcomputer interface. 62 /CCE Input Chip enable signal input terminal for microcomputer interface. In case of "L", BUS3-0 are active. 63 /RST Input 64 VDD5 — GND terminal for microcomputer interface. Input/Output Data input/output terminal for microcomputer interface. Reset signal input terminal. Reset: "L". 5V power supply terminal for microcomputer interface. VSS3 DMO FMO AVDD3 SEL TEBC RFGC VREF TRO FOO 46 VDD3 XI 47 XVSS3 XO 48 TESIN XVDD3 In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. Note: AI/F: Analog input/output terminal 3-5I/F: Terminal with a built-in 3-5 interface (5V system input/output terminal) 3I/F: 3V system input/output terminal 45 44 43 42 41 40 39 38 37 36 35 34 33 32 TEZI DVSS3 49 + Clock generator RO 50 31 TEI PWM D/A DVDD3 51 30 SBAD LPF DVR 52 29 FEI 1-bit DAC Servo control + A/D 28 RFRP LO 53 DVSS3 54 27 RFZI + ZDET 55 ROM Address circuit VSS5 56 26 RFCT Digital equalizer adjustment circuit 25 AVDD3 RAM 24 RFI BUS0 57 Correction circuit BUS1 58 Data slicer CLV servo 23 SLCO 16K RAM BUS2 59 22 AVSS3 Synchronizing signal guarantee EFM demodulation BUS3 60 Microcomputer interface /CCE 62 /RST 63 21 VCOF Digital out Audio output circuit BUCK 61 VCO 20 PVREF 19 LPFO Sub-code demodulation circuit PLL TMAX + 18 LPFN 17 TMAX 12 SFSY SBSY 13 14 15 16 PDD 11 PVDD3 10 /HSO 9 /UHSO 8 DATA 7 CLCK 6 SBOK AOUT 5 VSS3 BCK 4 VDD3 3 IPF 2 DOUT 1 LRCK VDD5 64 Figure 56 BLOCK DIAGRAM OF IC – 56 – CD-CH1000 IC6 VHiTA2147F/-1:Servo Pre Amp. (TA2147F) Pin No. Terminal Name Function Input/Output 1 VCC — 2 FNI Input 3.3V power supply terminal Main beam amp input terminal 3 FPI Input Main beam amp input terminal 4 TPI Input Sub-beam amp input terminal 5 TNI Input Sub-beam amp input terminal 6 MDI Input Monitor photodiode amplifier input terminal 7 LDO Output 8 SEL Input Laser diode amp output terminal APC circuit ON/OFF signal, LDO terminal control input terminal and bottom/peak detection frequency switching terminal APC circuit SEL 9 TEBC 10 11 LDO GND OFF Connection to VCC via 1kΩ Hi-z ON Control signal output VCC ON Control signal output Input Tracking error balance adjustment signal input terminal • TEBC input voltage TEN Input Tracking error signal generation amp antiphase input terminal TEO Output Tracking error signal generation amp output terminal 12 RFDC Output RF signal peak detection output terminal 13 GVSW Input AGC, FE, TE amp gain switching terminal Mode GVSW GND CD-RW Hi-z CD-DA VCC CD-CA 14 VRO Output Reference voltage (VRO) output terminal • VCC=3.3V: VRO=1/2 VCC 15 FEO Output Focus error signal generation amp output terminal 16 FEN 17 RFRP 18 RFRPIN 19 20 Input Output Focus error signal generation amp antiphase input terminal Signal generation amp output terminal for track count Input Signal generation amp input terminal for track count RFGO Output RF signal amplitude adjustment amp output terminal RFGC Input 21 AGCIN Input 22 RFO Output 23 RFN Input 24 GND — RF amplitude adjustment control signal input terminal • RFGC input voltage RF signal amplitude adjustment amp input terminal RF signal generation amp output terminal RF signal generation amp input terminal GND terminal – 57 – CD-CH1000 IC6 VHiTA2147F/-1:Servo Pre Amp. (TA2147F) PEAK GVSW 13 20K 12 RFDC 15K 50K 20K 20µ VRO 14 11 TEO 40K 20K 10p FEO 15 20K 15K 10 TEN 20K 40K 10p FEN 16 9 TEB 20K 50u 12K 1.3V 2K 50K 8 SEL RFRP 17 12K 20K 1K BOTTOM PEAK RFRPIN 18 7 LDO 14K 2K 40K 6 MDI RFGO 19 240K 15p RFGC 20 x0.5 x2 5 TNI 1 x0.5 x2 4 TPI 240K 15p 20K AGCIN 21 30K 180K 40p 80K 60k RFO 22 180K 3 FPI 20K 60k 80K 2 FNI 40p RFN 23 3K GND 24 K 20K 3K PIN VCTRL VCC HiZ GND 1 VCC SEL TEB RFGC GVSW (APC_SW) (TE_BAL) (AGC_Gain) (CD/RW) APC ON -50% +12dB APC ON 0% +6dB (0dB) APC OFF +50% 0dB (+12dB) (LDO=H) Figure 58 BLOCK DIAGRAM OF IC – 58 – DA (0dB) DA RW CD-CH1000 IC901 RH-iX0353AWZZ: System Microcomputer (IX0353AW) (1/2) Port Name Pin No. Input/Output Function 1 P60/A16 Output Cassette playback mute 2 P62/A18 Output Recording output (Cassette) 3 P61/A17 Output Recording bias output (Cassette) 4 P63/A19 Output Span output for destination 1 5 P64/RD Output Cassette operation motor output 6 P65/WR Output Cassette solenoid output 7 P66/WAIT Output Span output for destination 2 8 P67/ASTB Input Pulse for tape running check 9 VDD Input To be connected to VDD 10 P100/T15/TO5 Input A side foolproof switch 11 P101/T16/TO6 Input Not used 12 P102/T17/TO7 Input Cassette CAM switch 13 P103/T18/TO8 Input Cassette detection switch 14 P30/TO0 Output Tuner chip enable 15 P31/TO1 Input Destination input 16 P32/TO2 Output 17 P33/T11 Input 18 P34/T12 Output Expanded IC control signal 19 P35/T100 Output Expanded IC control signal 20 P36/T101 Output Expanded IC control signal 21 P37 Output Expanded IC control signal 22 TEST/Vpp 23* 24* CD mute Tuner span select Input Not used P90 Output Not used P91 Output Not used 25* P92 Output Not used 26* P93 Output Not used 27* P94 Output Not used 28 P06/INTP6 Output POWER relay control 29* P120/RTP0 Output Not used 30 P121/RTP1 Output Not used 31 P122/RTP2 Output Not used 32 P123/RTP3 Output LED output for timer 33 P124/RTP4 Output LCD backlight 34 P125/RTP5 Output 35 P126/RTP6 Input 36 P127/RTP7 Input Panel open switch 37 Vdd Input Connected to VDD 38 X2 Output 8 MHz sera - lock 39 X1 Input 8 MHz sera - lock 40 Vss Input Ground potertial to be connected to VSS 41 XT2 Output 32.768 kHz crystal 42 XT1 Input 32.768 kHz crystal 43 RESET Input Reset input 44 P00/INTP0 Input Remote control signal input 45 P01/INTP1 Input JOG A input 46 P02/INTP2/NMI Input JOG B input 47 P03/INTP3 Input Power failure detection 48 P04/INTP4 Input Speaker abnormal detection 49 P05/INTP5 Output 50 P95 Input 51 Avdd — System mute output Panel close switch Speaker relay POWER key input Analog power supply In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 59 – CD-CH1000 IC901 RH-iX0353AWZZ: System Microcomputer (IX0353AW) (2/2) Pin No. Port Name Input/Output — Function 52 AVref0 53 P10/ANI0 Input Key input 0 (AD port) 54 P11/ANI1 Input Key input 1 (AD port) 55 P12/ANI2 Input Key input 2 (AD port) 56 P13/ANI3 Input Key input 3 (AD port) 57 P14/ANI4 Input Key input 4 (AD port) 58 P15/ANI5 Input Level meter input L-ch 59 P16/ANI6 Input Tuner state input 60 P17/ANI7 Input Level meter input R-ch — Analog reference potential 0 61 Avss 62 P130/ANO0 Input 63 P131/ANO1 Output 64 AVref1 65 P70/RxD2/SI2 Input Not used 66 P71/TxD2/SO2 Output Not used 67 P72/ASCK2/SCK2 Input Not used 68 P20/RxD1/SI1 Input 69 P21/TxD1/SO1 Output Tuner data output 70 P22/ASCK1/SC Output Tuner clock output 71 P23/PCL Output Not used 72 P24/BUZ Output Not used 73 P25/SI0/SDA0 74 P26/SO0 Output 75 P27/SCK0/SCL0 Output 76 P80/A0 Input CAM A switch e 77 P81/A1 Input CAM A switch d 78 P82/A2 Input CAM A switch c 79 P83/A3 Input CAM A switch b 80 P84/A4 Input CAM A switch a 81 P85/A5 Input TRAY identification switch a 82 P86/A6 Input TRAY identification switch b 83 P87/A7 Input TRAY identification switch c 84 P40/AD0 Input CAM C switch b 85 P41/AD1 Input 86 P42/AD2 Output CD LSI chip enable 87 P43/AD3 Output CD LSI clock 88 P44/AD4 Input/Output CD LSI data input/output 89 P45/AD5 Input/Output CD LSI data input/output 90 P46/AD6 Input/Output CD LSI data input/output 91 P47/AD7 Input/Output CD LSI data input/output 92 P50/A8 Output CD LSI reset 93 P51/A9 Output CD LSI RW switching 94 P52/A10 Input CD pickup inner switch input 95 P53/A11 Output Tray motor forward rotation 96 P54/A12 Output Tray motor reverse rotation 97 P55/A13 Output CAM motor forward rotation 98 P56/A14 Output CAM motor reverse rotation 99 P57/A15 Output TAPE REC mute 100 Vss Input Input/Output Input Analog GND Tape mecha select single/reverse Not used Analog reference potential 1 Tuner data input Control output read/write to LCD driver Not used Control output clock to LCD driver CAM C switch a Ground potertial connected to VSS – 60 – CD-CH1000 IC702 VHiBU2092F/-1: Input/Output Expander (BU2092F) Pin No. Port Name Input/Output Function 1 VSS Input GND 2 DATA Input Sirial data input 3 CLOCK Input Sirial clock input 4 LCK Input Latch clock input 5 Q0 Output Panel LED 6 Q1 Ourput > I I LED 7 Q2 Output << LED 8 Q3 Output >> LED 9 Q4 Output Stop LED 10 Q5 Output Not used 11 Q6 Output CD 6 LED 12 Q7 Output CD 5 LED 13 Q8 Output CD 4 LED 14 Q9 Output CD 3 LED 15 Q10 Output CD 2 LED 16 Q11 Output CD 1 LED 17 OE Output Output enable 18 VDD Input Power supply IC912 VHiBU2092F/-1: Input/Output Expander (BU2092F) Pin No. Port Name Input/Output Function 1 VSS Input GND 2 DATA Input Sirial data input 3 CLK Input Sirial clock input 4 LCK 5 Q0 Output For CD power control 6* Q1 Output Not used 7* Q2 Output Not used 8* Q3 Output Not used 9 Q4 Output Not used 10* Q5 Output Not used Input Latch clock input 11* Q6 Output Panel control switch 12 Q7 Output Panel control output close 13 Q8 Output Panel control output open 14 Q9 Output Fan motor ON/OFF 15 Q10 Output Not used 16 Q11 Output Not used 17 OE Input Output enable 18 VDD Input Power supply In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 61 – CD-CH1000 LCD DISPLAY LCD720: RUNTZ0020AWZZ L R Recommended Circuit for Contrast adjustment VDD R1 LCD PANEL VLCD VR R2 80seg+4com VSS SCL R1+VR+R2=20k Ohm SDA VSS VDD VLCD PCF8533U/2 SA0,A0,A1,A2 connect to VSS R tr/2Cb MPU Pin No. Pin Name I/O Connect to Description 1 VLCD — Power supply LCD supply voltage 2 VSS — Power supply Logic ground 3 VDD — Power supply Supply voltage (5V) 4 SCL I MPU I C-bus serial clock input 5 SDA I/O MPU I C-bus serial data input/output 2 2 – 62 – 5V CD-CH1000 PARTS GUIDE AUDIO TOWER SYSTEM MODEL CD-CH1000 CD-CH1000 Audio Tower System consisting of CD-CH1000 (main unit) and CP-RW5000 (speaker system). “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call Toll-Free; 1-800-BE-SHARP MARK: SPARE PARTS-DELIVERY SECTION Explanation of capacitors/resistors parts codes Capacitors Resistors VCC ....................... Ceramic type VCK ........................ Ceramic type VCT ........................ Semiconductor type VC • • MF ............... Cylindrical type (without lead wire) VC • • MN ............... Cylindrical type (without lead wire) VC • • TV ................ Square type (without lead wire) VC • • TQ ............... Square type (without lead wire) VC • • CY ............... Square type (without lead wire) VC • • CZ ............... Square type (without lead wire) VC • • • • • • • • • J .. The 13th character represents capacity difference. ("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%, "C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.) VRD ....................... Carbon-film type VRS ........................ Carbon-film type VRN ....................... Metal-film type VR • • MF ............... Cylindrical type (without lead wire) VR • • MN ............... Cylindrical type (without lead wire) VR • • TV ................ Square type (without lead wire) VR • • TQ ............... Square type (without lead wire) VR • • CY ............... Square type (without lead wire) VR • • CZ ............... Square type (without lead wire) VR • • • • • • • • • J .. The 13th character represents error. ("J" ±5%, "F" ±1%, "D" ±0.5%.) If there are no indications for the electrolytic capacitors, error is ±20%. If there are no indications for other parts, the resistors are ±5% carbon-film type. NOTE: Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace parts with specified ones for maintaining the safety and performance of the set. CD-CH1000 NO. PRICE RANK PARTS CODE DESCRIPTION CD-CH1000 INTEGRATED CIRCUITS IC2 IC5 VHITC9490F/-1 VHIBA5939S/-1 J J IC6 IC101 VHITA2147F/-1 VHIAN7345K/-1 J J IC102 IC201 IC202 IC203 IC301 IC302 IC303 VHIBA3126N/-1 VHISTK40271-1 VHISTK40204-1 VHIKIA4558P-1 VHITA7358AP-1 VHILC72131/-1 VHILA1832S/-1 J J J J J J J IC502 IC503 IC701 IC702 IC802 IC808 VHILC75341/-1 VHINJM4558M-1 VHITA7291S/-1 VHIBU2092F/-1 VHIKIA7810AP1 VHIKIA7805AP1 J J J J J J IC901 RH-IX0353AWZZ J IC905 IC912 IC913 VHIKIA7042AP1 VHIBU2092F/-1 VHIKIA7805P-1 J J J AX Servo/Signal Control,TC9490F AH Focus/Tracking/Spin/ Sled Driver,BA5939S AM Servo Pre Amp.,TA2147F AM Playback and Record/ Playback Amp.,AN7345K AF Head Selector,BA3126N AZ Power AMP.,STK40271 AX Power AMP.,STK40204 AC Ope Amp.,KIA4558P AG FM Front End,TA7358AP AP PLL (Tuner) ,LC72131 AN FM IF Det./FM Mpx./AM IF, LA1832S AM Audio Processor,LC75341 AC Motor Driver,NJM4558M AH Loading Motor Driver,TA7291S AM Input/Output Expander,BU2092F AF Voltage Regulator,KIA7810AP AF Constant Voltage Regulator, KIA7805AP AY System Microcomputer, IX0353AW AC Reset,KIA7042AP AM Input/Output Expander,BU2092F AF Voltage Regulator,KIA7805P VS2SC1740R/-1 VS2SD2012//-1 VSKTA1266GR-1 VSKRA102M//-1 VSKRA107M//-1 VSKTC3199GR-1 VS2SA1015GR-1 VSKRC104M//-1 VSKTC3203Y/-1 VSDTC363TS/-1 VSKRC102M//-1 VSKTC3199GR-1 VS2SA562-Y/-1 VSKTC3194Y/-1 VSKRC104M//-1 VS2SB562-C/-1 VSKTA1266GR-1 VSKTC3199GR-1 VSDTC363TS/-1 VSKRA107M//-1 VSKTC3203Y/-1 VSKRA102M//-1 VSKRA102M//-1 VSKTC2026//-1 VSKTA1046Y/-1 VSKTC3199GR-1 VS2SD2012//-1 VSKTC3199GR-1 VSKRC102M//-1 VS2SB561-C/-1 VSKRC107M//-1 VS2SB561-C/-1 VSKRC107M//-1 VSKTC3199GR-1 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AB AD AB AC AE AB AB AC AC AC AC AB AC AD AC AD AB AB AC AE AC AC AC AF AC AB AD AB AC AC AC AC AC AB Silicon,NPN,2SC1740 R Silicon,NPN,2SD2012 Silicon,PNP,KTA1266 GR Digital,PNP,KRA102 M Digital,PNP,KRA107 M Silicon,NPN,KTC3199 GR Silicon,PNP,2SA1015 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3203 Y Digital,NPN,DTC363 TS Digital,NPN,KRC102 M Silicon,NPN,KTC3199 GR Silicon,PNP,2SA562 Y Silicon,NPN,KTC3194 Y Digital,NPN,KRC104 M Silicon,PNP,2SB562 C Silicon,PNP,KTA1266 GR Silicon,NPN,KTC3199 GR Digital,NPN,DTC363 TS Digital,PNP,KRA107 M Silicon,NPN,KTC3203 Y Digital,PNP,KRA102 M Digital,PNP,KRA102 M Silicon,NPN,KTC2026 Sillicon,PNP,KTA1046 Y Silicon,NPN,KTC3199 GR Silicon,NPN,2SD2012 Silicon,NPN,KTC3199 GR Digital,NPN,KRC102 M Silicon,PNP,2SB561 C Digital,NPN,KRC107 M Silicon,PNP,2SB561 C Digital,NPN,KRC107 M Silicon,NPN,KTC3199 GR VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHD1N4004S/-1 VHD1N4004S/-1 VHD1N4004S/-1 VHDTS6B04GM-1 J J J J J J J J J J AB AB AB AB AB AB AB AB AB AP Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,1N4004S Silicon,1N4004S Silicon,1N4004S Silicon,TS6B04GM DIODES ! ! D201~208 D210 D301~306 D310~312 D352 D507,508 D802 D804~807 D812~815 D816,817 DESCRIPTION PARTS CODE D818,819 D901,902 D905~907 D910 D951 D953,954 DZ1 DZ2 DZ201 DZ351 DZ803 DZ804 LED701~709 LED716~724 LED731 LED754~759 LED773~775 LED776 LED781,782 LED801 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHEMTZJ5R1A-1 VHEMTZJ3R9B-1 VHEMTZJ5R6B-1 VHEDZ5R1BSB-1 VHEMTZJ9R1B-1 VHEMTZJ100B-1 VHPL1154GDA-1 VHPL1154GDA-1 VHPHLMP1700-1 VHPK5052UL/-1 VHPL1154GDA-1 VHPK5052UL/-1 VHPK5052C//-1 VHPK5052UL/-1 J J J J J J J J J J J J J J J J J J J J AB AB AB AB AB AB AB AC AD AC AB AB AD AD AC AD AD AD AD AD Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Zener,5.1V,MTZJ5.1A Zener,3.9V,MTZJ3.9B Zener,5.6V,MTZJ5.6B Zener,5.1V,DZ5.1BSB Zener,9.1V,MTZJ9.1B Zener,10V,MTZJ10B LED,Green,L1154GDA LED,Green,L1154GDA LED,Red,HLMP1700 LED,Red,K5052UL LED,Green,L1154GDA LED,Red,K5052UL LED,Green,K5052C LED,Red,K5052UL RFILR0008AWZZ RFILF0124AFZZ RFILF0003AWZZ RFILA0009AWZZ J J J J AE AD AK AE Band Pass Filter FM IF,10.7 MHz FM IF AM IF RCILA0062AWZZ RCILB0066AWZZ RCILB0065AWZZ RCILI0017AWZZ RCILI0019AWZZ RTRNP0315AWZZ RTRNP0312AWZZ J J J J J J J AC AD AC AB AD BF AM AM Antenna AM Oscillation FM Oscillation FM IF AM IF Power,Main Power,Sub VP-DHR82M0000 VP-DHR82M0000 VP-MK331K0000 RCILZ0137AFZZ RCILR0056AWZZ VP-DH2R2K0000 VP-DH101K0000 VP-DH102K0000 VP-DH2R2K0000 VP-XH2R2K0000 VP-DH101K0000 VP-YF470K0000 VP-DH2R2K0000 J J J J J J J J J J J J J AB AB AB AA AB AB AB AB AB AB AB AB AB 0.82 µH,Playback PLL 0.82 µH,Playback PLL 330 µH,Choke 0.29 µH FM RF 2.2 µH,Peaking 100 µH,Choke 1 mH,Choke 2.2 µH,Peaking 2.2 µH,Choke 100 µH,Choke 47 µH,Choke 2.2 µH,Peaking J AC 10 kohm (B),Semi-VR [FM Mute Level] FILTERS BF301 CF302 CF351 CF352 TRANSFORMERS TRANSISTORS Q1 Q3 Q4 Q5 Q101 Q102 Q114 Q115 Q116 Q119,120 Q200 Q201~211 Q212 Q302 Q351 Q360 Q371 Q501,502 Q507,508 Q509 Q707 Q708 Q720~725 Q805 Q806 Q807 Q809 Q810 Q901 Q905 Q906,907 Q908 Q909 Q954,955 PRICE RANK NO. ! ! T302 T306 T311 T312 T351 T801 T802 COILS L1,2 L7 L104 L201~204 L312 L342 L351,352 L353 L501,502 L703~705 L901 L910 L915 VARIABLE RESISTOR VR351 RVR-M0026AWZZ VARIABLE CAPACITORS VD301 VD302,303 VHCSVC348S/-1 VHCSVC211C/-1 J J AK Variable Capacitance,SVC348S AG Variable Capacitance,SVC211C J J J J J AF AF AH AE AC Crystal,16.934 MHz Crystal,456 kHz Crystal,4.5 MHz Ceramic,8 MHz Crystal,32.768 kHz J J J J J AB AA AB AB AB 100 µF,10V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 10 µF,16V,Electrolytic 100 µF,10V,Electrolytic VIBRATORS X1 X351 X352 X901 X902 RCRSP0005AWZZ 92LCRSTL1425A RCRSP0002AWZZ RCRM-0173AFZZ RCRSP0011AWZZ CAPACITORS C1 C2,3 C4 C5,6 C7 –1– RC-GZA107AF1A VCTYMN1EF223Z RC-GZA107AF1A RC-GZA106AF1C RC-GZA107AF1A CD-CH1000 NO. C8 C10 C11,12 C13,14 C15~17 C18 C19 C20 C21 C22 C23 C24 C25 C26 C27 C28,29 C30 C31 C32,33 C34 C36 C37 C38 C39 C40,41 C42 C43 C44 C45 C46 C47,48 C49,50 C51 C58~60 C64,65 C67 C91,92 C93~99 C101,102 C103 C104,105 C106,107 C108,109 C110,111 C112,113 C116 C118 C119,120 C121,122 C123,124 C125,126 C127 C129,130 C131 C132 C133 C134 C135 C137 C138 C140,141 C200 C201,202 C203,204 C205,206 C207,208 C209,210 C211,212 C213,214 C215,216 C217,218 C219,220 C221,222 C223,224 C225,226 C227,228 C229,230 C231,232 C233,234 C235,236 C237,238 C239,240 PRICE RANK PARTS CODE VCTYMN1EF223Z VCTYMN1EF223Z VCCSMN1HL330J VCTYMN1EF223Z VCKYPA1HF473Z VCQYKA1HM333J VCKYPA1HF473Z VCCSMN1HL470J VCKYMN1HB102K VCQYKA1HM333J VCTYMN1CY103K VCTYMN1CX272K VCTYMN1CY103K VCTYMN0JY153M VCTYMN1CX472K VCTYMN1EF223Z RC-GZA476AF1A RC-GZA227AF1A VCTYMN1EF223Z VCCSMN1HL220J VCCSMN1HL270J VCTYMN1EF223Z RC-GZA106AF1H VCCSMN1HL3R9C VCQYKA1HM104K VCTYMN1CX682K VCTYMN1EF223Z RC-GZA227AF1A RC-GZA477AF1A VCTYMN1EF223Z RC-GZA107AF1A VCTYPA1HF104Z RC-GZA107AF1A VCKYMN1HB101K VCKYBT1HB102K VCKYPA1HB102K VCKYMN1HB471J VCKYMN1HB101K VCKYPA1HB181K RC-GZA106AF1C VCKYPA1HB561K VCTYPA1EX333K VCCSPA1HL331J RC-GZA476AF1E VCKYPA1HB561K RC-GZA335AF1H VCKYPA1HF223Z RC-GZA105AF1H VCKYPA1HB271K VCKYPA1EX223K RC-GZA226AF1H VCKYPU1HB332K RC-GZA105AF1H RC-GZA226AF1H RC-GZA227AF1C VCQYKA1HM393K RC-GZA476AF1E RC-QZA473AFYJ VCQPKA2AA822J VCKYPU1HB332K RC-GZA105AF1H VCEAZA1CW476M VCCSPA1HL221J RC-GZA476AF1H VCCSPA1HL150J VCFYHA1HA154J RC-GZA107AF1H VCQYKA1HM154K VCKYPA1HF223Z VCKZPA1HF223Z VCCCPA1HH101J RC-GZA106AF1H VCQYKA1HM153K RC-GZA106AF1H VCCCPU1HH221J RC-GZA225AF1H VCFYHA1HA154J VCCSPA1HL221J RC-GZA105AF1H VCCSPA1HL150J RC-GZA107AF1H VCKZPA1HF223Z J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AB AB AB AA AA AB AA AA AA AA AA AA AB AB AA AA AA AA AB AA AB AA AA AB AC AA AB AB AB AA AA AA AB AA AA AB AA AA AA AB AA AB AB AB AA AB AA AB AB AB AB AB AB AA AA AB AB AA AB AA AC AC AB AB AA AA AB AB AB AB AB AC AA AB AA AC AA DESCRIPTION NO. 0.022 µF,25V 0.022 µF,25V 33 pF,50V 0.022 µF,25V 0.047 µF,50V 0.033 µF,50V,Mylar 0.047 µF,50V 47 pF,50V 0.001 µF,50V 0.033 µF,50V,Mylar 0.01 µF,16V 0.0027 µF,16V 0.01 µF,16V 0.015 µF,6.3V 0.0047 µF,16V 0.022 µF,25V 47 µF,10V,Electrolytic 220 µF,10V,Electrolytic 0.022 µF,25V 22 pF,50V 27 pF,50V 0.022 µF,25V 10 µF,50V,Electrolytic 3.9 pF,50V 0.1 µF,50V,Mylar 0.0068 µF,16V 0.022 µF,25V 220 µF,10V,Electrolytic 470 µF,10V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 0.1 µF,50V 100 µF,10V,Electrolytic 100 pF,50V 0.001 µF,50V 0.001 µF,50V 470 pF,50V 100 pF,50V 180 pF,50V 10 µF,16V,Electrolytic 560 pF,50V 0.033 µF,25V 330 pF,50V 47 µF,25V,Electrolytic 560 pF,50V 3.3 µF,50V,Electrolytic 0.022 µF,50V 1 µF,50V,Electrolytic 270 pF,50V 0.022 µF,25V 22 µF,50V,Electrolytic 0.0033 µF,50V 1 µF,50V,Electrolytic 22 µF,50V,Electrolytic 220 µF,16V,Electrolytic 0.039 µF,50V,Mylar 47 µF,25V,Electrolytic 0.047 µF,50V,Mylar 0.0082 µF,100V,Polypropylene 0.0033 µF,50V 1 µF,50V,Electrolytic 47 µF,16V,Electrolytic 220 pF,50V 47 µF,50V,Electrolytic 15 pF,50V 0.15 µF,50V,Thin Film 100 µF,50V,Electrolytic 0.15 µF,50V,Mylar 0.022 µF,50V 0.022 µF,50V 100 pF (CH),50V 10 µF,50V,Electrolytic 0.015 µF,50V,Mylar 10 µF,50V,Electrolytic 220 pF (CH),50V 2.2 µF,50V,Electrolytic 0.15 µF,50V,Thin Film 220 pF,50V 1 µF,50V,Electrolytic 15 pF,50V 100 µF,50V,Electrolytic 0.022 µF,50V –2– C241,242 C243~246 C247 C248 C249 C250 C251 C252 C253,254 C255 C256 C257 C258 C301 C303 C304 C305 C306 C308 C309 C310~312 C313 C314,315 C316 C317 C318 C319 C320 C321 C323 C324 C325 C326 C327 C330 C331 C332 C334 C335 C337 C338 C339 C341 C342 C343 C345~347 C350 C351 C352 C353,354 C355 C356 C357 C358 C361 C362 C363 C364 C365 C366 C367,368 C370~372 C373,374 C380 C381 C382 C384 C385 C386 C387 C389,390 C391 C392 C393 C394 C395 C396 C397 C398 C399 C501,502 C503 PRICE RANK PARTS CODE RC-GZA106AF1H VCQYKA1HM104K RC-GZA476AF1H VCKYPA1HF223Z RC-GZA476AF1E VCQYKA1HM223K RC-GZA476AF1H RC-GZW228AF1H RC-EZ0027AWZZ RC-GZW228AF1H RC-GZA476AF1H RC-GZA106AF1H VCEAZA1CW107M VCKYCY1HB102K VCCCCY1HH100D VCKYCY1HB103K VCCCCY1HH5R0C VCKYBT1HB102K VCCCCY1HH5R0C VCKYCY1HB102K VCCCCY1HH101J VCCCCY1HH220J VCKYCY1HB472K VCKYCY1EF104Z VCKYCY1HB102K VCCCCY1HH101J VCTYPA1EX104K VCTYPA1EX473K RC-GZA107AF1C VCKYCY1HB223K VCCCCY1HH4R0C VCCCCY1HH150J VCCCCY1HH180J VCKYCY1EF104Z VCCUCY1HJ150J VCKYPA1HF473Z VCKYCY1HB223K VCCUCY1HJ150J VCCCCY1HH331J VCKYCY1HB223K VCKYCY1HB102K VCCCCY1HH101J VCKYCY1EF104Z VCKYCY1HB223K VCCCCY1HH330J VCKYCY1HB223K VCKYCY1CB473K VCKYCY1HB223K RC-GZA106AF1H VCKYCY1HB223K VCCCCY1HH220J VCKYCY1HB102K RC-GZA225AF1H RC-GZA105AF1H VCKYCY1HB223K RC-GZA335AF1H VCKYCY1HB223K RC-GZA475AF1H VCKYCY1HB223K VCKYCY1HB102K RC-GZA105AF1H RC-GZA105AF1H VCKYCY1HB153K RC-GZA106AF1H VCCCCY1HH120J VCCCCY1HH150J VCKYCY1HB102K VCKYCY1HB103K VCCCCY1HH331J VCKYCY1HB223K VCKYCY1HB102K RC-GZA476AF1C VCKYCY1HB102K RC-GZA105AF1H RC-GZA476AF1C VCKYCY1HB223K RC-GZA107AF1C VCKYCY1HB223K RC-GZA107AF1C VCKYCY1HB223K VCKYCY1HB102K RC-GZA226AF1H J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AB AB AB AB AB AB AB AH AN AH AB AB AC AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AB AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AB AB AA AB AA AB AA AA AB AB AA AB AA AA AA AA AA AA AA AB AA AB AB AA AB AA AB AA AA AB DESCRIPTION 10 µF,50V,Electrolytic 0.1 µF,50V,Mylar 47 µF,50V,Electrolytic 0.022 µF,50V 47 µF,25V,Electrolytic 0.022 µF,50V,Mylar 47 µF,50V,Electrolytic 2200 µF,50V,Electrolytic 3300 µF,63V,Electrolytic 2200 µF,50V,Electrolytic 47 µF,50V,Electrolytic 10 µF,50V,Electrolytic 100 µF,16V,Electrolytic 0.001 µF,50V 10 pF (CH),50V 0.01 µF,50V 5 pF (CH),50V 0.001 µF,50V 5 pF (CH),50V 0.001 µF,50V 100 pF (CH),50V 22 pF (CH),50V 0.0047 µF,50V 0.1 µF,25V 0.001 µF,50V 100 pF (CH),50V 0.1 µF,25V 0.047 µF,25V 100 µF,16V,Electrolytic 0.022 µF,50V 4 pF (CH),50V 15 pF (CH),50V 18 pF (CH),50V 0.1 µF,25V 15 pF (UJ),50V 0.047 µF,50V 0.022 µF,50V 15 pF (UJ),50V 330 pF (CH),50V 0.022 µF,50V 0.001 µF,50V 100 pF (CH),50V 0.1 µF,25V 0.022 µF,50V 33 pF (CH),50V 0.022 µF,50V 0.047 µF,16V 0.022 µF,50V 10 µF,50V,Electrolytic 0.022 µF,50V 22 pF (CH),50V 0.001 µF,50V 2.2 µF,50V,Electrolytic 1 µF,50V,Electrolytic 0.022 µF,50V 3.3 µF,50V,Electrolytic 0.022 µF,50V 4.7 µF,50V,Electrolytic 0.022 µF,50V 0.001 µF,50V 1 µF,50V,Electrolytic 1 µF,50V,Electrolytic 0.015 µF,50V 10 µF,50V,Electrolytic 12 pF (CH),50V 15 pF (CH),50V 0.001 µF,50V 0.01 µF,50V 330 pF (CH),50V 0.022 µF,50V 0.001 µF,50V 47 µF,16V,Electrolytic 0.001 µF,50V 1 µF,50V,Electrolytic 47 µF,16V,Electrolytic 0.022 µF,50V 100 µF,16V,Electrolytic 0.022 µF,50V 100 µF,16V,Electrolytic 0.022 µF,50V 0.001 µF,50V 22 µF,50V,Electrolytic CD-CH1000 NO. ! C509,510 C511~514 C515,516 C517~528 C529,530 C531,532 C533,534 C535 C536 C537 C540,541 C550,551 C562 C563 C564 C566 C573,574 C597,598 C599 C703 C704,705 C706 C707 C708 C709 C712 C713 C714 C715 C716 C807 C810 C814 C815,816 C817 C819 C820 C821 C822 C823 C824 C825 C826,827 C830 C831~835 C836 C837 C838 C839 C840 C901 C902 C903 C904 C905 C906 C907 C912 C913 C914 C916,917 C925,926 C936 C941 C942 C943 C945 C950 C957 C958 C964 C970 C974 C975 C976 C977,978 C995 C998 C999 C1001,1002 C1003 C1004,1005 PRICE RANK PARTS CODE RC-GZA106AF1H RC-QZA104AFYJ RC-QZA272AFYJ RC-GZA105AF1H RC-GZA106AF1H VCCCCY1HH101J VCCCCY1HH470J VCKYCY1EF104Z RC-GZA106AF1H VCKYCY1EF104Z VCKYCY1HB391K VCEAZA1HW226M VCKYCY1EF104Z RC-GZA106AF1H VCKYCY1EF104Z RC-GZA226AF1H RC-GZA225AF1H VCKYCY1HB272K VCKYCY1HB102K VCTYBT1EF223Z VCCSPA1HL100J VCKYPA1HF223Z VCKYBT1HB101K VCTYBT1EF223Z RC-GZA476AF1E VCKYBT1HB102K VCKYPA1HB102K RC-GZA476AF1C VCTYPA1CX104K VCEAEA1HW225M RC-QZA473AFYJ RC-GZA226AF1H RC-GZA476AF1E VCFYHA1HA104J VCEAZW1EW688M VCEAZV1EW477M RC-QZA473AFYJ RC-GZA107AF1E RC-GZA106AF1H RC-GZA107AF1C RC-QZA473AFYJ RC-GZA108AF0J RC-QZA473AFYJ VCEAZV1VW477M RC-QZA473AFYJ RC-KZ002LAWZZ VCKYPA1HF223Z RC-GZA227AF1C RC-GZA107AF1C VCKYPA1HF223Z RC-GZA108AF0J VCKYCY1EF104Z RC-GZA104AF1H VCKYCY1HB103K RC-GZA335AF1H VCKYCY1EF104Z RC-GZA106AF1H RC-GZA476AF1C VCEAZA1HW225M VCKYCY1EF104Z VCKYCY1EF104Z VCEAZA1HW105M VCCCCY1HH101J VCCCCY1HH220J VCCCCY1HH180J VCKYCY1EF104Z VCKYCY1EF104Z VCCCCY1HH151J VCCCCY1HH151J VCKYCY1HB391K VCTYPA1HF104Z VCKYCY1EF104Z VCKYCY1EF104Z RC-GZA105AF1H VCKYCY1EF104Z VCCCCY1HH101J VCCCCY1HH101J RC-GZA226AF1A VCKYCY1HB681K RC-GZA225AF1H RC-GZA476AF1H VCKYCY1EF104Z J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AB AC AB AB AB AA AA AA AB AA AA AB AA AB AA AB AB AA AA AA AA AB AA AA AB AA AA AB AB AB AB AB AB AB AL AB AB AB AB AB AC AB AD AB AE AB AB AB AB AC AA AB AA AB AA AB AB AB AA AA AB AA AA AA AA AA AA AA AA AB AA AA AB AA AA AA AB AA AB AB AA DESCRIPTION 10 µF,50V,Electrolytic 0.1 µF,50V,Mylar 0.0027 µF,50V,Mylar 1 µF,50V,Electrolytic 10 µF,50V,Electrolytic 100 pF (CH),50V 47 pF (CH),50V 0.1 µF,25V 10 µF,50V,Electrolytic 0.1 µF,25V 390 pF,50V 22 µF,50V,Electrolytic 0.1 µF,25V 10 µF,50V,Electrolytic 0.1 µF,25V 22 µF,50V,Electrolytic 2.2 µF,50V,Electrolytic 0.0027 µF,50V 0.001 µF,50V 0.022 µF,25V 10 pF,50V 0.022 µF,50V 100 pF,50V 0.022 µF,25V 47 µF,25V,Electrolytic 0.001 µF,50V 0.001 µF,50V 47 µF,16V,Electrolytic 0.1 µF,16V 2.2 µF,50V,Electrolytic 0.047 µF,50V,Mylar 22 µF,50V,Electrolytic 47 µF,25V,Electrolytic 0.1 µF,50V,Thin Film 6800 µF,25V,Electrolytic 470 µF,25V,Electrolytic 0.047 µF,50V,Mylar 100 µF,25V,Electrolytic 10 µF,50V,Electrolytic 100 µF,16V,Electrolytic 0.047 µF,50V,Mylar 1000 µF,6.3V,Electrolytic 0.047 µF,50V,Mylar 470 µF,35V,Electrolytic 0.047 µF,50V,Mylar 0.0047 µF,250V,Ceramic 0.022 µF,50V 220 µF,16V,Electrolytic 100 µF,16V,Electrolytic 0.022 µF,50V 1000 µF,6.3V,Electrolytic 0.1 µF,25V 0.1 µF,50V,Electrolytic 0.01 µF,50V 3.3 µF,50V,Electrolytic 0.1 µF,25V 10 µF,50V,Electrolytic 47 µF,16V,Electrolytic 2.2 µF,50V,Electrolytic 0.1 µF,25V 0.1 µF,25V 1 µF,50V,Electrolytic 100 pF (CH),50V 22 pF (CH),50V 18 pF (CH),50V 0.1 µF,25V 0.1 µF,25V 150 pF (CH),50V 150 pF (CH),50V 390 pF,50V 0.1 µF,50V 0.1 µF,25V 0.1 µF,25V 1 µF,50V,Electrolytic 0.1 µF,25V 100 pF (CH),50V 100 pF (CH),50V 22 µF,10V,Electrolytic 680 pF,50V 2.2 µF,50V,Electrolytic 47 µF,50V,Electrolytic 0.1 µF,25V NO. C1006 C1007,1008 PRICE RANK PARTS CODE RC-GZA476AF1H J VCEAZA1HW105M J DESCRIPTION AB 47 µF,50V,Electrolytic AB 1 µF,50V,Electrolytic RESISTORS ! ! FR213,214 FR251,252 R6 R7~13 R14 R16 R17 R18 R19 R21 R25 R27 R28 R29 R30 R31 R32 R35 R36 R37 R38 R39 R40 R41 R42 R43 R44 R45 R46 R47 R48 R49,50 R52 R53 R54 R55,56 R57 R71,72 R73,74 R75,76 R77,78 R91,92 R101 R102,103 R104 R105 R109 R114,115 R116,117 R118,119 R120,121 R124,125 R126,127 R128 R129,130 R131 R132,133 R134,135 R136~138 R139 R141 R143 R144 R147 R148 R149 R150 R153,154 R155,156 R200 R201,202 R203,204 R205,206 R207 R209,210 –3– VRD-MN2BD000C VRS-CY1JB000J VRG-ST2EC101J VRG-ST2EC101J VRD-ST2EE121J VRD-MN2BD102J VRD-ST2CD820J VRD-MN2BD101J VRD-MN2BD102J VRD-MN2BD101J VRD-MN2BD105J VRD-MN2BD562J VRD-MN2BD562J VRD-ST2CD473J VRD-MN2BD473J VRD-MN2BD104J VRD-MN2BD225J VRD-MN2BD103J VRD-MN2BD153J VRD-MN2BD102J VRD-MN2BD222J VRD-MN2BD333J VRD-ST2CD102J VRD-MN2BD103J VRD-MN2BD101J VRD-MN2BD332J VRD-MN2BD563J VRD-MN2BD821J VRD-MN2BD683J VRD-MN2BD822J VRD-MN2BD122J VRD-MN2BD103J VRD-ST2EE100J VRD-ST2CD122J VRD-MN2BD561J VRD-MN2BD683J VRD-MN2BD473J VRD-MN2BD683J VRD-MN2BD473J VRD-MN2BD103J VRD-MN2BD822J VRD-ST2CD103J VRD-MN2BD822J VRD-MN2BD473J VRD-ST2CD102J VRD-ST2CD222J VRD-ST2CD562J VRD-ST2CD101J VRD-ST2CD153J VRD-ST2CD102J VRD-ST2CD560J VRD-ST2CD104J VRD-ST2CD392J VRD-ST2CD562J VRD-ST2CD153J VRD-ST2CD683J VRD-ST2CD102J VRD-ST2CD682J VRD-ST2CD152J VRD-ST2CD101J VRD-ST2CD103J VRD-ST2CD223J VRD-ST2CD473J VRD-ST2EE820J VRD-ST2EE221J VRD-ST2CD472J VRD-ST2CD4R7J VRD-ST2CD153J VRD-ST2CD682J VRD-ST2CD473J VRD-ST2CD333J VRD-ST2EE101J VRD-ST2CD102J VRD-ST2CD821J VRD-ST2CD563J VRD-RT2HD120J VRD-ST2CD102J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AB AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 0 ohm,Jumper,ø1.4×3.5mm,Ivory 0 ohm,Jumper,0.8×1.55mm,Green 100 ohm,1/4W,Fusible 100 ohm,1/4W,Fusible 120 ohms,1/4W 1 kohm,1/8W 82 ohms,1/6W 100 ohm,1/8W 1 kohm,1/8W 100 ohm,1/8W 1 Mohm,1/8W 5.6 kohms,1/8W 5.6 kohms,1/8W 47 kohms,1/6W 47 kohms,1/8W 100 kohm,1/8W 2.2 Mohms,1/8W 10 kohm,1/8W 15 kohms,1/8W 1 kohm,1/8W 2.2 kohms,1/8W 33 kohms,1/8W 1 kohm,1/6W 10 kohm,1/8W 100 ohm,1/8W 3.3 kohms,1/8W 56 kohms,1/8W 820 ohms,1/8W 68 kohms,1/8W 8.2 kohms,1/8W 1.2 kohms,1/8W 10 kohm,1/8W 10 ohm,1/4W 1.2 kohms,1/6W 560 ohms,1/8W 68 kohms,1/8W 47 kohms,1/8W 68 kohms,1/8W 47 kohms,1/8W 10 kohm,1/8W 8.2 kohms,1/8W 10 kohm,1/6W 8.2 kohms,1/8W 47 kohms,1/8W 1 kohm,1/6W 2.2 kohms,1/6W 5.6 kohms,1/6W 100 ohm,1/6W 15 kohms,1/6W 1 kohm,1/6W 56 ohms,1/6W 100 kohm,1/6W 3.9 kohms,1/6W 5.6 kohms,1/6W 15 kohms,1/6W 68 kohms,1/6W 1 kohm,1/6W 6.8 kohms,1/6W 1.5 kohms,1/6W 100 ohm,1/6W 10 kohm,1/6W 22 kohms,1/6W 47 kohms,1/6W 82 ohms,1/4W 220 ohms,1/4W 4.7 kohms,1/6W 4.7 ohms,1/6W 15 kohms,1/6W 6.8 kohms,1/6W 47 kohms,1/6W 33 kohms,1/6W 100 ohm,1/4W 1 kohm,1/6W 820 ohms,1/6W 56 kohms,1/6W 12 ohms,1/2W 1 kohm,1/6W CD-CH1000 NO. R211,212 R213 R215,216 R217,218 R219,220 R221,222 R223,224 R225,226 R227,228 R229,230 R231,232 R233,234 R235,236 R237,238 R239,240 R241,242 R243,244 R245,246 R247,248 R249,250 R251 R253 R254 R255,256 R257,258 R259,260 R261~264 R265,266 R267~270 R271,272 R273~276 R277 R278 R279 R280 R281 R283 R284 R299 R302 R309 R311 R313 R314 R322 R323 R325 R327 R336 R345 R350 R351 R352 R353 R354 R355 R356 R357 R358 R359 R360 R361,362 R363,364 R369 R370 R371 R372~374 R376 R377 R378 R379 R380 R381 R382 R383~385 R389 R391,392 R393 R395 R399 R501,502 R503,504 PRICE RANK PARTS CODE VRD-ST2CD183J VRD-ST2CD101J VRD-ST2CD223J VRD-ST2CD183J VRN-VV3DAR22J VRD-ST2CD472J VRN-VV3AAR10J VRD-ST2CD103J VRD-ST2CD822J VRN-VV3DAR22J VRD-ST2CD102J VRD-ST2CD104J VRD-ST2CD182J VRD-ST2CD683J VRD-ST2CD102J VRD-ST2CD683J VRD-ST2CD102J VRD-ST2CD821J VRD-ST2CD563J VRD-ST2CD102J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD103J VRN-VV3AAR10J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD563J VRD-RT2HD4R7J VRD-RT2HD331J VRD-RT2HD4R7J VRD-ST2CD223J VRD-ST2CD331J VRD-ST2CD563J VRD-ST2CD223J VRD-ST2CD563J VRD-RT2HD120J VRD-ST2CD474J VRD-ST2CD102J VRD-ST2CD392J VRD-ST2CD100J VRD-ST2CD103J VRS-CY1JB104J VRS-CY1JB333J VRD-ST2CD220J VRS-CY1JB681J VRS-CY1JB683J VRS-CY1JB473J VRD-ST2CD330J VRD-ST2CD103J VRD-ST2CD472J VRS-CY1JB272J VRD-ST2CD562J VRS-CY1JB102J VRS-CY1JB271J VRS-CY1JB392J VRS-CY1JB332J VRS-CY1JB102J VRS-CY1JB474J VRS-CY1JB822J VRS-CY1JB182J VRD-ST2CD472J VRS-CY1JB183J VRS-CY1JB122J VRD-ST2EE821J VRD-ST2CD102J VRS-CY1JB472J VRS-CY1JB102J VRS-CY1JB102J VRS-CY1JB473J VRS-CY1JB823J VRS-CY1JB222J VRS-CY1JB152J VRS-CY1JB103J VRD-ST2EE151J VRS-CY1JB562J VRS-CY1JB392J VRD-ST2EE391J VRS-CY1JB102J VRS-CY1JB473J VRD-ST2CD103J VRD-ST2CD331J VRS-CY1JB222J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AC AA AB AA AA AC AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION NO. 18 kohms,1/6W 100 ohm,1/6W 22 kohms,1/6W 18 kohms,1/6W 0.22 ohms,2W 4.7 kohms,1/6W 0.1 ohm,1W 10 kohm,1/6W 8.2 kohms,1/6W 0.22 ohms,2W 1 kohm,1/6W 100 kohm,1/6W 1.8 kohms,1/6W 68 kohms,1/6W 1 kohm,1/6W 68 kohms,1/6W 1 kohm,1/6W 820 ohms,1/6W 56 kohms,1/6W 1 kohm,1/6W 10 kohm,1/6W 1 kohm,1/6W 10 kohm,1/6W 0.1 ohm,1W 10 kohm,1/6W 1 kohm,1/6W 56 kohms,1/6W 4.7 ohms,1/2W 330 ohms,1/2W 4.7 ohms,1/2W 22 kohms,1/6W 330 ohms,1/6W 56 kohms,1/6W 22 kohms,1/6W 56 kohms,1/6W 12 ohms,1/2W 470 kohms,1/6W 1 kohm,1/6W 3.9 kohms,1/6W 10 ohm,1/6W 10 kohm,1/6W 100 kohm,1/16W 33 kohms,1/16W 22 ohms,1/6W 680 ohms,1/16W 68 kohms,1/16W 47 kohms,1/16W 33 ohms,1/6W 10 kohm,1/6W 4.7 kohms,1/6W 2.7 kohms,1/16W 5.6 kohms,1/6W 1 kohm,1/16W 270 ohms,1/16W 3.9 kohms,1/16W 3.3 kohms,1/16W 1 kohm,1/16W 470 kohms,1/16W 8.2 kohms,1/16W 1.8 kohms,1/16W 4.7 kohms,1/6W 18 kohms,1/16W 1.2 kohms,1/16W 820 ohms,1/4W 1 kohm,1/6W 4.7 kohms,1/16W 1 kohm,1/16W 1 kohm,1/16W 47 kohms,1/16W 82 kohms,1/16W 2.2 kohms,1/16W 1.5 kohms,1/16W 10 kohm,1/16W 150 ohms,1/4W 5.6 kohms,1/16W 3.9 kohms,1/16W 390 ohms,1/4W 1 kohm,1/16W 47 kohms,1/16W 10 kohm,1/6W 330 ohms,1/6W 2.2 kohms,1/16W R507 R511,512 R513,514 R524~526 R527,528 R529~534 R535,536 R537,538 R539,540 R541,542 R543,544 R547,548 R549,550 R551,552 R582 R591,592 R701~706 R707,708 R710,711 R712 R713~715 R718,719 R720,721 R723 R724 R726 R727 R728,729 R732 R733 R735,736 R741 R743,744 R747 R748 R749 R750 R752~754 R755~757 R758~760 R761 R762 R763 R764~766 R768 R769 R771 R772 R773 R775 R776 R777 R779 R780 R781 R783 R787 R788 R791,792 R803 R806,807 R811 R813 R814 R815 R820,821 R822 R830 R834,835 R836 R837 R901~903 R904 R905,906 R907 R908 R910~913 R914~917 R918~921 R927 R928 R932,933 –4– PRICE RANK PARTS CODE VRS-CY1JB223J VRS-CY1JB822J VRS-CY1JB122J VRD-ST2CD102J VRS-CY1JB222J VRS-CY1JB392J VRS-CY1JB473J VRS-CY1JB102J VRS-CY1JB103J VRS-CY1JB152J VRS-CY1JB473J VRS-CY1JB222J VRS-CY1JB393J VRS-CY1JB473J VRS-CY1JB223J VRS-CY1JB473J VRD-ST2CD102J VRD-ST2CD272J VRD-ST2CD472J VRD-ST2CD222J VRD-ST2CD102J VRD-ST2CD102J VRD-ST2CD682J VRD-ST2CD182J VRD-ST2CD151J VRD-ST2CD222J VRD-ST2CD151J VRD-ST2CD153J VRD-ST2CD151J VRD-ST2CD182J VRD-ST2CD333J VRD-ST2CD151J VRD-ST2CD151J VRD-ST2CD102J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD101J VRD-ST2CD122J VRD-ST2CD152J VRD-ST2CD182J VRD-ST2CD331J VRS-CY1JB682J VRS-CY1JB272J VRD-ST2CD222J VRD-RT2HD2R2J VRD-ST2CD392J VRD-ST2CD392J VRD-ST2CD102J VRD-ST2CD472J VRD-ST2CD472J VRD-ST2CD102J VRD-ST2CD822J VRD-ST2CD822J VRD-ST2CD102J VRD-ST2CD183J VRD-ST2CD183J VRD-ST2CD102J VRD-ST2EE820J VRD-ST2CD272J VRD-ST2CD223J VRD-ST2CD223J VRD-RT2HD3R3J VRD-ST2CD152J VRD-ST2CD101J VRD-ST2CD473J VRD-ST2CD471J VRD-ST2CD152J VRD-ST2CD101J VRD-RT2HD560J VRD-ST2EE271J VRD-RT2HD3R3J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRS-CY1JB101J VRS-CY1JB102J VRS-CY1JB102J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 22 kohms,1/16W 8.2 kohms,1/16W 1.2 kohms,1/16W 1 kohm,1/6W 2.2 kohms,1/16W 3.9 kohms,1/16W 47 kohms,1/16W 1 kohm,1/16W 10 kohm,1/16W 1.5 kohms,1/16W 47 kohms,1/16W 2.2 kohms,1/16W 39 kohms,1/16W 47 kohms,1/16W 22 kohms,1/16W 47 kohms,1/16W 1 kohm,1/6W 2.7 kohms,1/6W 4.7 kohms,1/6W 2.2 kohms,1/6W 1 kohm,1/6W 1 kohm,1/6W 6.8 kohms,1/6W 1.8 kohms,1/6W 150 ohms,1/6W 2.2 kohms,1/6W 150 ohms,1/6W 15 kohms,1/6W 150 ohms,1/6W 1.8 kohms,1/6W 33 kohms,1/6W 150 ohms,1/6W 150 ohms,1/6W 1 kohm,1/6W 10 kohm,1/6W 1 kohm,1/6W 100 ohm,1/6W 1.2 kohms,1/6W 1.5 kohms,1/6W 1.8 kohms,1/6W 330 ohms,1/6W 6.8 kohms,1/16W 2.7 kohms,1/16W 2.2 kohms,1/6W 2.2 ohms,1/2W 3.9 kohms,1/6W 3.9 kohms,1/6W 1 kohm,1/6W 4.7 kohms,1/6W 4.7 kohms,1/6W 1 kohm,1/6W 8.2 kohms,1/6W 8.2 kohms,1/6W 1 kohm,1/6W 18 kohms,1/6W 18 kohms,1/6W 1 kohm,1/6W 82 ohms,1/4W 2.7 kohms,1/6W 22 kohms,1/6W 22 kohms,1/6W 3.3 ohms,1/2W 1.5 kohms,1/6W 100 ohm,1/6W 47 kohms,1/6W 470 ohms,1/6W 1.5 kohms,1/6W 100 ohm,1/6W 56 ohms,1/2W 270 ohms,1/4W 3.3 ohms,1/2W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 100 ohm,1/16W 1 kohm,1/16W 1 kohm,1/16W CD-CH1000 NO. R934 R935,936 R941 R943,944 R945 R946~948 R949 R953,954 R955~959 R960 R962,963 R965,966 R967 R968~970 R971 R972 R974 R976~981 R982,983 R984~988 R989 R990 R991 R992~994 R995 R996~998 R999 R1001 R1002 R1003 R1007 R1008 R1011 R1012 R1013 R1014 R1015 R1016,1017 R1022 R1023 R1024 R1026,1027 R1028 R1031,1032 R1035,1036 R1040 R1044 R1046 R1048 R1050~1052 R1053~1057 R1058 R1060 R1065,1066 R1068 R1071,1072 R1081,1082 R1084~1090 R1092~1094 R1099 R1105 R1106~1109 R1112,1113 R1118,1119 R1124~1126 R1129,1130 R1131,1132 R1133 R1138,1139 R1140 R1141 R1142 R1143 RA710,711 PRICE RANK PARTS CODE VRD-ST2CD102J VRS-CY1JB102J VRS-CY1JB334J VRS-CY1JB102J VRS-CY1JB101J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB473J VRS-CY1JB104J VRD-ST2CD472J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB104J VRS-CY1JB102J VRD-ST2CD473J VRS-CY1JB104J VRS-CY1JB821J VRS-CY1JB103J VRS-CY1JB473J VRS-CY1JB102J VRS-CY1JB103J VRS-CY1JB103J VRS-CY1JB273J VRS-CY1JB102J VRS-CY1JB562J VRS-CY1JB103J VRS-CY1JB223J VRS-CY1JB123J VRS-CY1JB103J VRS-CY1JB102J VRS-CY1JB103J VRS-CY1JB104J VRS-CY1JB104J VRS-CY1JB103J VRD-ST2CD103J VRD-ST2CD333J VRS-CY1JB562J VRS-CY1JB562J VRS-CY1JB562J VRD-ST2CD473J VRD-ST2CD103J VRS-CY1JB103J VRS-CY1JB123J VRS-CY1JB102J VRS-CY1JB103J VRS-CY1JB472J VRS-CY1JB221J VRD-ST2CD471J VRS-CY1JB564J VRD-ST2EE2R2J VRD-ST2CD102J VRD-ST2EE2R2J VRD-ST2CD105J VRD-ST2CD151J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 1 kohm,1/6W 1 kohm,1/16W 330 kohms,1/16W 1 kohm,1/16W 100 ohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 1 kohm,1/16W 1 kohm,1/6W 47 kohms,1/16W 100 kohm,1/16W 4.7 kohms,1/6W 1 kohm,1/16W 1 kohm,1/6W 100 kohm,1/16W 1 kohm,1/16W 47 kohms,1/6W 100 kohm,1/16W 820 ohms,1/16W 10 kohm,1/16W 47 kohms,1/16W 1 kohm,1/16W 10 kohm,1/16W 10 kohm,1/16W 27 kohms,1/16W 1 kohm,1/16W 5.6 kohms,1/16W 10 kohm,1/16W 22 kohms,1/16W 12 kohms,1/16W 10 kohm,1/16W 1 kohm,1/16W 10 kohm,1/16W 100 kohm,1/16W 100 kohm,1/16W 10 kohm,1/16W 10 kohm,1/6W 33 kohms,1/6W 5.6 kohms,1/16W 5.6 kohms,1/16W 5.6 kohms,1/16W 47 kohms,1/6W 10 kohm,1/6W 10 kohm,1/16W 12 kohms,1/16W 1 kohm,1/16W 10 kohm,1/16W 4.7 kohms,1/16W 220 ohms,1/16W 470 ohms,1/6W 560 kohms,1/16W 2.2 ohms,1/4W 1 kohm,1/6W 2.2 ohms,1/4W 1 Mohm,1/6W 150 ohms,1/6W OTHER CIRCUITRY PARTS BI201A/B BI702/CNS702 BI703A/B BI720/CNS720 BI730/CNS730 QCNWN1658AWZZ QCNWN1668AWZZ QCNWN1674AWZZ QCNWN1665AWZZ QCNWN1675AWZZ J J J J J AF AF AD AH AE Connector Ass’y,8/8Pin Connector Ass’y,6/6Pin Connector Ass’y,2/2Pin Connector Ass’y,11/11Pin Connector Ass’y,4/4Pin NO. ! ! ! ! ! ! ! PRICE RANK PARTS CODE BI740A/B BI741/CNS741 BI770/CNS770 BI771A/B BI772/CNS772 BI773/CNS773 BI804/CNS804 BI808/CNS808 BI940/CNS940 BI950 BI960 CNP1 CNP2 CNP3 CNP4 CNP5 CNP6 CNP6A CNP7 CNP101 CNP102 CNP203 CNP204 CNP207 CNP303 CNP701 CNP721 CNP775 CNP801 CNP802 CNP803 CNP805 CNP806 CNP807 CNP901 CNP931 CNP933 CNP934 CNP935A CNP970 CNS4 CNS5A/B CNS6A/B CNS7A/B CNS200 COR801 CORE1 F801 F803,804 F805,806 F807 F808 FFC901 FFC970 FW2 FW3 JK501 JK701 JOG701 LCD720 MO200 MO700 MOB1 MOB2 NM1 NM2 NSW1 RX701 RY201,202 RY801 SO201 SW701 SW705 SW710 QCNWN1673AWZZ J QCNWN1666AWZZ J QCNWN1667AWZZ J QCNWN1684AWZZ J QCNWN1683AWZZ J QCNWN1682AWZZ J QCNWN1656AWZZ J QCNWN1655AWZZ J QCNWN1661AWZZ J QCNCW010HAWZZ J QCNCW010QAWZZ J QCNCWZF33AWZZ J QCNCW026HAWZZ J QCNCW026DAWZZ J 92LCONE4P53254 J QCNCM704HAWZZ J 92LCONE6P53253 J 92LCONE6P53254 J QCNCM704GAWZZ J QCNCM704GAFZZ J QCNCM704HAFZZ J 92LCONE5P5268 J 92LCONE2P53254 J 92LCONE4P53254 J 92LCONE3P5268 J QCNCWZG05AWZZ J 92LCONE6P53254 J 92LCONE2P53253 J QCNCM049BAWZZ J QCNCM051EAWZZ J QCNCM035CAWZZ J 92LCONE6P5268 J QCNCM010QAWZZ J QCNCM010HAWZZ J QCNCWZF33AWZZ J 92LCONPB11BPHK J 92LCONE5P53253 J 92LCONE7P53253 J 92LCONPB6BPHK J QCNCWZG11AWZZ J QCNWN1692AWZZ J QCNWN1690AWZZ J QCNWN1668AWZZ J QCNWN1689AWZZ J QCNWN1659AWZZ J RCORF0015AWZZ J RCORF0015AWZZ J QFS-D252BSJNI J QFS-D502BSJNI J QFS-D402BSJNI J QFS-D502BSJNI J QFS-D252BSJNI J QCNWN1672AWZZ J QCNWN1671AWZZ J QCNWN1691AWZZ J QCNWN1693AWZZ J 92LJACKL1776A J QJAKM0010AWZZ J QSW-Z0011AWZZ J RUNTZ0020AWZZ J RMOTV0027AWZZ J RMOTV0027AWZZ J 92LMTR3435DASY J 92LMTR3435DASY J 92LMTR2996CASY J 92LMTR1854BASY J QSW-F9001AW01 J VHLN64H380A-1 J RRLYD0004AWZZ J RRLYD0001SJZZ J QTANA0806AWZZ J 92LSWICH1401AT J QSW-B0002AWZZ J 92LSWICH1401AT J AE AG AG AE AG AD AE AE AF AD AE AF AC AC AC AC AC AC AC AC AC AD AB AC AC AB AC AB AC AD AB AC AD AC AF AC AB AC AB AD AD AG AF AF AC AB AB AB AE AB AE AB AF AE AD AC AF AF AG BC AM AM AM AM AS AP AD AK AP AQ AG AC AF AC SW711 SW712 SW720 SW721 SW722 SW723 SW724 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT AC AC AC AC AC AC AC –5– J J J J J J J DESCRIPTION Connector Ass’y,3/3Pin Connector Ass’y,5/5Pin Connector Ass’y,7/7Pin Connector Ass’y,4/4Pin Connector Ass’y,6/6Pin Connector Ass’y,2/2Pin Connector Ass’y,6/6Pin Connector Ass’y,5/5Pin Connector Ass’y,8/8Pin Socket,8Pin Socket,15Pin Socket,33Pin Socket,8Pin Socket,4Pin Plug,4Pin Plug,8Pin Plug,6Pin Plug,6Pin Plug,7Pin Plug,7Pin Plug,8Pin Plug,5Pin Plug,2Pin Plug,4Pin Plug,3Pin Socket,5Pin Plug,6Pin Plug,2Pin Plug,2Pin Plug,5Pin Plug,3Pin Plug,6Pin Plug,15Pin Plug,8Pin Socket,33Pin Plug,11Pin Plug,5Pin Plug,7Pin Plug,6Pin Socket,11Pin Connector Ass’y,4Pin Connector Ass’y,8/8Pin Connector Ass’y,6/6Pin Connector Ass’y,7/7Pin Connector Ass’y,2Pin Core Core Fuse,2.5A 125V Fuse,5A 125V Fuse,4A 125V Fuse,5A 125V Fuse,2.5A 125V Flat Cable,33Pin Flat Cable,11Pin Flat Wire,8Pin Flat Wire,4Pin Jack,AUX IN Jack,Headphones Switch,Push Type [Jog Dial] LCD Display Motor,Air Cooling Fan Motor,Control Panel Main Cam Motor Ass’y Tray Motor Ass’y Motor with Chassis [Spindle] Motor with Gear [Sled] Switch,Push Type [Pickup In] Remote Sensor,N64H380A Relay Relay Terminal,Speaker Switch,Key Type [Power] Switch,Lever Type [Open/Close] Switch,Key Type [Panel Open/Close] Switch,Key Type [Volume Down] Switch,Key Type [Volume Up] Switch,Key Type [CD1 Eject] Switch,Key Type [CD2 Eject] Switch,Key Type [CD3 Eject] Switch,Key Type [CD4 Eject] Switch,Key Type [CD5 Eject] CD-CH1000 NO. PRICE RANK PARTS CODE SW725 SW730 SW731 SW732 SW733 SW734 SW735 SW750 SW751 SW752 SW753 SW755 SW756 SW758 SW761 SW762 SW763 SW764 SW770 SW772 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT J J J J J J J J J J J J J J J J J J J J AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC SW773 SW774 SW776 SW778 SWB101 SWB102 SWB103 SWB104 SWB105 SWB106 SWB107 SWB108 SWB109 SWB110 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT 92LSWICH1401AT QSW-P9005AWZZ QSW-P9005AWZZ QSW-P9005AWZZ QSW-P9003AWZZ QSW-P9003AWZZ QSW-P9003AWZZ QSW-P9003AWZZ QSW-P9003AWZZ QSW-P9004AWZZ QSW-P9004AWZZ J J J J J J J J J J J J J J AC AC AC AC AD AD AD AD AD AD AD AD AE AE DESCRIPTION NO. Switch,Key Type [CD6 Eject] Switch,Key Type [CD1 Play] Switch,Key Type [CD2 Play] Switch,Key Type [CD3 Play] Switch,Key Type [CD4 Play] Switch,Key Type [CD5 Play] Switch,Key Type [CD6 Play] Switch,Key Type [Record Pause] Switch,Key Type [Clear] Switch,Key Type [Memory] Switch,Key Type [Fast Reverse] Switch,Key Type [Fast Forward] Switch,Key Type [Play/Pause] Switch,Key Type [Stop] Switch,Key Type [AUX] Switch,Key Type [Tuner] Switch,Key Type [Tape] Switch,Key Type [CD] Switch,Key Type [Play Mode] Switch,Key Type [Equalizer Mode] Switch,Key Type [X-BASS] Switch,Key Type [Display] Switch,Key Type [Menu] Switch,Key Type [Enter] Switch,Push Type[Disc Detect 1] Switch,Push Type[Disc Detect 2] Switch,Push Type[Disc Detect 3] Switch,Push Type [Mode 1] Switch,Push Type [Mode 2] Switch,Push Type [Mode 3] Switch,Push Type [Mode 4] Switch,Push Type [Mode 5] Switch,Push Type [Tray 1] Switch,Push Type [Tray 2] CD MECHANISM PARTS ! 301 302 303 304 305 306 306- 1 NGERH0011AWZZ NGERH0012AWZZ MLEVP0080AWZZ NSFTM0020AWFW 92LMCUSN1524A 92LHPC1LXASY ———— J J J J J J AC AC AC AD AD BD — 306- 2 306- 3 307 308 701 702 703 704 NM1 NM2 NSW1 NGERR0043AFZZ MSPRC0961AFZZ PCUSG0001AWSA PCUSG0004AWSA XBSSD26P06000 XHBSD20P05000 XBBSD20P03000 LX-WZ1070AFZZ 92LMTR2996CASY 92LMTR1854BASY QSW-F9001AW01 J J J J J J J J J J J AC AA AD AD AA AA AA AA AS AP AD Gear,Middle Gear,Drive Rail,Guide Shaft,Guide Cushion Pickup Unit Ass’y Pickup Unit (Not Replacement Item) Gear,Rack Spring,Rack Cushion Cushion Screw,ø2.6×6mm Screw,ø2×5mm Screw,ø2×3mm Washer,ø1.5×ø3.8×0.25mm Motor with Chassis [Spindle] Motor with Gear [Sled] Switch,Push Type [Pickup In] LCHSM0106AWZZ PGIDM0033AWZZ PGIDM0034AWZZ NGERH0121AWZZ PGIDM0035AWZZ MLEVP0098AWZZ MSPRP0040AWFW GCOVA1317AWZZ GCOVA1318AWZZ GCOVA1319AWZZ GCOVA1320AWZZ GCOVA1321AWZZ GCOVA1322AWZZ LPLTP0010AWZZ MCAMP0009AWZZ NSFTT0057AWFD LPLTP0009AWZZ MLEVP0099AWZZ NGERH0098AWZZ NGERH0099AWZZ MLEVF0055AWFW J J J J J J J J J J J J J J J J J J J J J AQ AH AG AC AH AB AD AF AF AF AF AF AF AG AE AE AH AB AC AC NGERH0100AWZZ MSPRT0040AWFJ NGERH0111AWZZ NGERH0113AWZZ NGERH0116AWZZ NGERH0117AWZZ NGERH0118AWZZ NGERH0119AWZZ NGERH0115AWZZ NGERH0106AWZZ NGERH0120AWZZ NSFTT0055AWM1 NGERH0122AWZZ NSFTT0055AWFD NGERH0123AWZZ NGERH0108AWZZ NGERH0109AWZZ NGERH0110AWZZ NGERH0103AWZZ NGERH0102AWZZ NGERH0105AWZZ NGERH0104AWZZ NGERH0101AWZZ NGERH0114AWZZ NGERH0107AWZZ NGERH0112AWZZ MLEVP0097AWZZ NSFTT0056AWFD LHLDZ1270AWZZ PMAGF0001AWZZ LHLDM1011AWZZ 92LNBAND1318A QCNCW025DAWZZ QCNCW025HAWZZ XBPSD26P04000 XEBSD20P07000 XEBSD20P10000 XHBSD20P05000 LX-EZ0005AWFD LX-EZ0026AWFD LX-JZ0105AFFN XEBSD30P10000 92LMTR3435DASY 92LMTR3435DASY J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AC AB AC AF AH AC AB AF AC AC AB AH AA AA AM AM 201 201- 1 92LCAB3435AASY J ———— — 201- 2 GCOVA1314AWSA J AF 201- 3 201- 4 201- 5 201- 6 201- 7 201- 8 201- 9 201-10 201-11 201-12 201-13 201-14 201-15 201-16 201-17 201-18 201-19 201-20 201-21 201-22 201-23 201-24 201-25 201-26 201-27 201-28 201-29 201-30 201-31 GCOVA1315AWSA GDORF0080AWSA GDORF0081AWSA GDORF0084AWSA GDORF0085AWSA GDORF0086AWSA GDORF0087AWSA GDORF0088AWSA HDECQ0597AWSA HDECQ0598AWSA MLOKC0005AWZZ JKNBZ0724AWSA JKNBZ0726AWSA JKNBZ0735AWSA JKNBZ0741AWSA LANGK0210AWFW LHLDS1005AWZZ LHLDS1006AWZZ LHLDZ1271AWSA LHLDZ1276AWZZ MLIFP0008AWZZ MSPRC0029AWFJ MSPRD0140AWFJ MSPRD0141AWFJ PCOVA1323AWSA PCUSG0053AWSA LHLDZ1272AWZZ PSHEM0010AWZZ PSHEM0009AWZZ AL AG AD AD AD AD AD AD AK AN AC AF AG AF AK AB AC AC AD AC AD AB AC AB AB AB AC AK AB AC AB AC AB AB AD AB AC AF AB AC AH AF AD AA AB AC AA AB AA AA AA DESCRIPTION Gear,Stabilizer Drive,Right Spring,OS Lever Gear,Tray Drive,Rear Gear,Tray Joint,Rear Gear,Mode Big Gear,Lift A Gear,Lift B Gear,Lift C Gear,Tray Idler Gear,Motor Idler,F Gear,Stabilizer A Stabilizer Gear Ass’y Gear,Stabilizer C Shaft,Stabilizer Gear Gear,Stabilizer D Gear,Tray Big Gear,Tray A Gear,Tray B Gear,Motor Idler,C Gear,Motor Idler,B Gear,Motor Idler,E Gear,Motor Idler,D Gear,Motor Idler,A Gear,Tray C Gear,Tray Drive,Front Gear,Tray Joint,Front Lever,Left Shaft,Lift Lever Holder,Stabilizer Magnet Stabilizer Nylon Band,80mm Holder,Flat Wire,4Pin Holder,Flat Wire,8Pin Screw,ø2.6×4mm Screw,ø2×7mm Screw,ø2×10mm Screw,ø2×5mm Screw,ø2.6×10mm Screw,ø2×9mm Screw,ø1.7×5mm Screw,ø3×10mm Main Cam Motor Ass’y Tray Motor Ass’y CABINET PARTS CHANGER MECHANISM PARTS 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 133- 1 133- 2 133- 3 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 801 802 803 804 805 806 807 808 MOB1 MOB2 PRICE RANK PARTS CODE Main Base Changer Box,Left Changer Box,Right Gear,Stabilizer B Bracket,Stabilizer Gear Lever,Tray Lock Spring,Tray Lock Lever Disc Tray 1 Disc Tray 2 Disc Tray 3 Disc Tray 4 Disc Tray 5 Disc Tray 6 Top Plate,Rear Cam,Lift Shaft,Lift Cam Top Plate,Front Lever,Disc OB Gear,Stabilizer Drive,Left/Right Gear,Stabilizer Drive,Left Lever,OS,Left/Right –6– J J J J J J J J J J J J J J J J J J J J J J J J J J J J J Front Panel Ass’y Front Panel (Not Replacement Item) Cover,Changer Door Panel, Bottom Cover,Cassette Holder Cassette Holder Door,Changer 1 Door,Changer 2 Door,Changer 3 Door,Changer 4 Door,Changer 5 Door,Changer 6 Panel,Changer Door Center Window Cassette Lock Button,Power Button,CD Play Button,Control Eject Button,CD Eject Bracket,Headphones Support Holder,Saft,Left Holder,Saft,Right Holder,Changer Door Holder,Cassette Lock Damper Spring,Cassette Lock Spring,Cassette Up Spring,Changer Door Cover,Remote Sensor Cushion,Center Panel Holder,Switch Shield Sheet,Tape Head Earth Sheet,Display PWB CD-CH1000 NO. ! ! ! ! ! ! PRICE RANK PARTS CODE 201-32 201-33 201-34 201-35 201-36 201-37 201-38 202 202- 1 202- 2 203 203- 1 203- 2 204 205 205- 1 205- 2 205- 3 205- 4 205- 5 205- 6 205- 7 205- 8 205- 9 205-10 205-11 205-12 205-13 205-14 205-15 205-16 206 206- 1 206- 2 206- 3 206- 4 206- 5 206- 6 206- 7 207 207 208 MSPRZ0010AWFJ JKNBK0080AWSA PSPAZ0025AWZZ LHLDZ1265AWZZ LHLDZ1266AWZZ PSHEP0040AWZZ LHLDZ1263AWZZ 92LCAB3435BASY GITAS0077AWSA PCUSG0022AWZZ 92LCAB3435CASY GITAS0078AWSA PCUSG0022AWZZ GCAB-1188AWSA 92LPNL3435AASY GCOVA1311AWSA GCOVA1312AWSA GCOVA1313AWSA GDORF0082AWSA HDECQ0601AWSA HDECQ0602AWSA HDECQ0603AWSA HDECQ0604AWSA JKNBZ0727AWSA JKNBZ0728AWSA JKNBZ0730AWSA JKNBZ0731AWSA JKNBZ0732AWSA MSPRD0142AWFJ LHLDZ1267AWZZ LHLDZ1268AWZZ GEAR3435AASY1 LHLDZ1261AWZZ LHLDZ1262AWZZ PSPAZ0023AWZZ NGERH0097AWZZ NGERH0124AWZZ NGERW0013AWZZ NGERW0014AWZZ GITAR0610AWSA GITAR0642AWSA HDECQ0605AWSA J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 209 210 211 212 213 214 215 216 217 218 219 225 226 227 228 229 230 231 232 233 236 237 238 LANGK0197AWFW LANGK0198AWFW LANGK0199AWFW LANGK0200AWFW LANGK0226AWFW LANGK0227AWFW LANGT0042AWFW LBSHC0005AWZZ LCHSM0105AWFW LCHSZ0017AWFW LHLDK9001AW00 MSPRD0108AWFJ NBRGC0003AWZZ NFANP0001AWZZ PCUSG0008AWZZ PCUSG0022AWZZ PRDAR0163AWFW PRDAR0164AWFW PRDAR0165AWFW 92LNBAND1318A PSLDM3075AWFW PSLDM3076AWFW PSPAS0003AWZZ J J J J J J J J J J J J J J J J J J J J J J J 239 240 241 250 250- 1 250- 2 250- 3 250- 4 250- 5 250- 6 250- 7 250- 8 QACCD0022AWZZ QFSHD0001AWZZ 92LCSPR1431C KMECB0015AWZZ 92PF513-869 92PF525-332 92PF567-648 92PFF19U92PF514-135 92PFF19S92PFD58M-XX 92PF765-286 J J J J J J J J J J J J DESCRIPTION Spring,Display PWB AG Knob,Jog Spacer,LCD PWB AC Holder,LED,A AC Holder,LED,B AG Sheet,LCD AE Holder,LCD Side Panel Ass’y,Left AP Side Panel,Left AB Cushion,Leg,Left Side Panel Ass’y,Right AP Side Panel,Right AB Cushion,Leg,Right AN Top Cabinet Control Panel Ass’y AN Control Panel A AB Indicator A,Button AB Indicator B,Button AQ Control Panel B AM Decoration Plate,Outer Window AG Outer Window AG Inner Window AG Ring,Jog Knob AH Button,Function AH Button,Control AG Button,Play Mode AG Button,Menu AE Button,Enter AD Spring,Control Panel AD Holder,LED,C AC Holder,LED,D Gear Ass’y AE Gear Box A AC Gear Box B AC Spacer,Warm Gear AC Gear,Reduc.A AF Gear,Reduc.B AC Gear,Warm AF Gear,Warm Wheel AP Rear Panel [For U.S.A.] Rear Panel [For Canada] AP Decoration Plate, Display Window AG Bracket,Center Support AE Bracket,Fan Motor Support AF Bracket,Heat Sink Support AE Bracket,PWB Support Bracket,Panel Support,Left Bracket,Panel Support,Right AC Bracket,Power PWB/Main PWB AD Bushing,AC Power Supply Cord AW Main Chassis AN Chassis,Bottom AB Poly Core Tie AC Spring,Fan Motor AC Bearing Metal AD Rotary Fan,Motor AB Cushion,Spacer AB Cushion,Leg AP Heat Sink,Main AS Heat Sink,Sub A AH Heat Sink,Sub B AA Nylon Band,80mm Shield Plate,Power PWB Shield Plate,Phone AC Spacer,Fan Motor Support Bracket AM AC Power Supply Cord AB Holder,Fuse AA Spring,Fan Ring BB Tape Mechanism Ass’y Head Plate Block Motor with Pulley [Tape] Tape Mechanism PWB Ass’y Belt,Main Pinch Roller Belt,FF/REW Gear,Cam Solenoid NO. 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 PRICE RANK PARTS CODE LX-BZ0880AFZZ LX-BZ2222AXZZ LX-EZ0028AWFN LX-HZ0082AFZZ LX-JZ0010AFFD XBBSD20P05000 XEBSD26P10000 XEBSD30P10000 XEBSD30P14000 XEBSD30P20000 XESSD26P12000 XESSD30P10000 XESSN26P12000 XJBSD30P08000 XJBSD30P10000 XJBSD30P14000 XJBSF30P10000 XJBSF30P16000 XJSSD30P10000 XWHSD32-10130 J J J J J J J J J J J J J J J J J J J J AC AB AC AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA DESCRIPTION Screw,ø2×2.2mm Screw,Special Screw,ø2.6×12mm Screw,ø4×8mm Screw,ø3×10mm Screw,ø2×5mm Screw,ø2.6×10mm Screw,ø3×10mm Screw,ø3×14mm Screw,ø3×20mm Screw,ø2.6×12mm Screw,ø3×10mm Screw,ø2.6×12mm Screw,ø3×8mm Screw,ø3×10mm Screw,ø3×14mm Screw,ø3×10mm Screw,ø3×16mm Screw,ø3×10mm Washer,ø3.2×ø13×1.0mm PACKING PARTS (Except for U.S.A.) SPAKA0258AWZZ J SPAKA0268AWZZ J SPAKC1041AWZZ J SPAKC1042AWZZ SPAKZ0629AWZZ J J SSAKA0007AWZZ J AB SSAKH0038AWZZ TLABN0112AWZZ J J AE AA TLABR1142AWZZ 92LBAG1460C1 J J AB AB QANTL0007AWZZ TCAUS0042AWZZ TINSE0319AWZZ TINSK0106AWZZ TINSZ0585AWZZ TLABN0100AWZZ J J J J J J AK AB AG AK AB TLABZ0593AWZZ TLABZ0818AWZZ RRMCG0240AWSA GFTAB1030AWSA J J J J Packing Add.,Left/Right (Serial No.00600001~00704000 Only) Packing Add.,Front/Rear (Serial No.00704001~) Packing Case [Except for Canada] Packing Case [For Canada] Packing Add.,Accessories (Serial No.00600001~00704000 Only) Polyethylene Bag,Accessories (Serial No.007040001~) Polyethylene Bag,Unit Label,Serial Number [For Canada Only] Label,Bar Code,Packing Case Polyethylene Bag,Accessories (Serial No.00600001~ 00704000 Only) ACCESSORIES AM/FM Loop Antenna Caution,Sheet Operation Manual [For U.S.A.] Operation Manual [For Canada] Quick Guide [U.S.A.Only] Label,Prod.Serial Number [For U.S.A.Only] AB Energy Star Label (Set) Label,Feature,CD Changer AU Remote Control Battery Lid,Remote Control P.W.B. ASSEMBLY (Not Replacement Item) PWB-A PWB-B1~9 92LPWB3435MANS J 92LPWB3435DPLS J PWB-C PWB-D1~3 92LPWB3435CDUS J 92LPWB3435PWRS J PWB-E PWB-F PWB-G PWB-H QPWBF0027AWZZ QPWBF0644AWZZ QPWBF0645AWZZ 92PF567-648 J J J J — — Main Display/LED A/LED B/ CD Switch/Control/Jog/Motor/ Switch/Headphones (Combined Ass’y) — CD — Power/Sub Trans/Speaker (Combined Ass’y) AD CD Motor (PWB Only) AD Tray Switch (PWB Only) AC Cam Switch (PWB Only) — Tape Mechanism OTHER SERVICE PARTS QCNWN6931AFZZ J UDSKA0004AFZZ J –7– AZ Extension Flat Cable (33Pin) CD Pickup Lens Cleaner Disc CD-CH1000 NO. PRICE RANK PARTS CODE DESCRIPTION CP-RW5000 SPEAKER BOX PARTS 701 702 703 704 705 706 707 708 709 92L0517-01C 92LJ1934A 92LJ1933A 92LJ2773TA 92LJ2772WA 92LJ9802 92LJ9802BK 92LJ2776WB 92LE5870 J J J J J J J J J 710 711 712 713 714 715 716 717 718 719 720 SP601,602 SP603,604 SP605,606 92LE3192RBA 92LJ9763B 92LJ3093L 92LJ3093C 92LP5889 92LF1078 92LF1080 92LF166540ASH 92LF2017A 92LL9763B 92LJ3041B RSPA10002AW6W RSPA00002AW6T VSP0013WB476A J J J J J J J J J J J J J J AL AL AH AG AF AC AD AN AF AC AK AC AB AB AK AD AU AU AY Speaker Box Ass’y Front Panel Ass’y Net Frame Ass’y Ring,Tweeter Ring,Woofer Catching Holder,Top Catching Holder,Bottom Panel,Sub Woofer Speaker Cord Ass’y,Woofer with Capacitor Speaker Cord Ass’y,Sub Woofer Cushion,Speaker Cord Speaker Terminal,Woofer Speaker Terminal,Sub Woofer Label,Specifications Screw,ø3×10mm Screw,ø3×10mm Screw,ø4×16mm Screw,ø4×20mm Felt Felt Woofer Tweeter Sub Woofer PACKING PARTS (Except for U.S.A.) 92LN1892B 92LN1892T 92LV1054C 92LV5840 J J J J Packing Add.,Bottom,Speaker Packing Add.,Top,Speaker Polyethylene Bag,Speaker Center Pad,Speaker ACCESSORY 92LT7809 J AM Speaker Cord Ass’y –8– CD-CH1000 CD-CH1000 306-2 A 306 306-1 306-3 701 704 B 701 304 C 302 301 702 D 303 703x2 E NM1 F 307 NM2 308 305x2 G NSW1 H PWB-E 1 2 3 4 Figure 9 CD MECHANISM EXPLODED VIEW –9– 5 6 CD-CH1000 CD-CH1000 803x3 803x2 114 117 803x2 A 803x3 806 148 B 802x3 116 149 118x2 146 106x6 126 803x2 802x2 107 152 147 806 PWB-F 145 124 115 C 125 134 143 102 803 144 803 138 123 127 142 120 805 140 137 805 141 804 133-1 141 807 132 D 139 131 130 121 119 133-2 803x2 133 E 804 119 113 136 121 128 129 135 122 805 112 F 123 111 PWB-G 133-3 151 101 104 110 105 G 109 801x4 MOB1 PWB-C MOB2 803x2 803x3 802x2 808x4 803 108 H 805x4 CD MECHANISM 1 2 103 150 3 4 Figure 10 CD CHANGER MECHANISM EXPLODED VIEW – 10 – 5 6 CD-CH1000 CD-CH1000 201-4 201 201-30 A PWB-B2 201-3 201-25 201-31 201-34 609x4 BELT CONNECTION B FF/REW Belt PWB-B1 FF/REW Clutch 201-32 603x4 201-38 TAPE MECHANISM 201-37 LCD720 612x4 602 Flywheel Tape Main Belt Motor 201-23 C 208 PWB-B3 608x6 250 201-12 250-1, 250-2, 250-3, 250-4, 250-5, 250-6, 201-13 619 250-7, 250-8 201-24 201-1 D 201-16 201-14 201-26x6 201-11 201-15 201-10 201-9 201-8 201-7 201-6 201-5 E 614x2 607 201-29 201-33 205-4 610 205-10 201-17 201-27 201-18 613x2 608 x2 201-21 610x2 PWB-B9 229x2 201-35 201-22 608 201-28x2 201-36 608x2 F 205 611x3 205-3x2 205-15 PWB-B4 G 201-19 201-2 205-9 201-20 613x2 205-7 607x2 205-13 205-12 205-11 607x6 205-1 607 607 206-6 607x2 PWB-B7 206-3 MO700 206-4 205-14 206-1 205-16 PWB-B6 205-6 610 607 607x2 607x6 607 608 205-8 205-2x2 PWB-B8 PWB-B5 206-2 233 607 206 606x2 206-7 206-5 H 205-5 607x3 Note: Only the unit and consumale parts are supplied as parts supply for the Tape mechanism. 1 2 3 4 Figure 11 CABINET EXPLODED VIEW (1/2) – 11 – 5 6 CD-CH1000 CD-CH1000 617 204 618x2 A 617x5 618x2 605 PWB-D1 236 239 219 614 216 605 B 617x2 PWB-D3 IC802 Q809 Q805 207 IC202 IC201 615x3 232 617x4 231 C 617x4 616x4 230 Silicon Grease 617 202-2 615x3 604x4 M0200 238 228 202-1 202 225 D 227 614 x2 226 241 210 211 620x2 PWB-D2 238 228 601x2 616x2 240x14 PWB-A 614 614 T801 209 614 E 215 614x3 212 237 614x2 213 605x4 217 203-1 F CD CHANGER MECHANISM 214 619 614x2 619 218 G 203-2 608x5 H 1 2 617x4 203 3 4 Figure 12 CABINET EXPLODED VIEW (2/2) – 12 – 5 6 CD-CH1000 CP-RW5000 A 703 702 710 709 718x4 708 B 701 C SP605(L-CH) SP606(R-CH) SP603(L-CH) SP604(R-CH) 715x2 D 704 713 712 720x2 706x2 716x2 719 714 711 E 717x4 719 707x2 705 F TWEETER SP603(L-CH) SP604(R-CH) SP601(L-CH) SP602(R-CH) WOOFER Capacitor SP601(L-CH) SP602(R-CH) BK YL BK TWEETER SP603(L-CH) SP604(R-CH) G Capacitor 2.7µF,100V Electrolytic (N.P.) BLUE SPEAKER TERMINAL (712) SPEAKER TERMINAL (712) WOOFER SP601(L-CH) SP602(R-CH) SUB WOOFER SP605(L-CH) SP606(R-CH) SPEAKER TERMINAL SUB WOOFER (713) BK (709) RED SPEAKER TERMINAL SUB WOOFER (713) BK H (710) 1 2 3 4 Figure 13 SPEAKER EXPLODED VIEW – 13 – 5 SUB WOOFER SP605(L-CH) SP606(R-CH) 6 CD-CH1000 PACKING OF THE SET (FOR U.S.A. ONLY) Setting position of switches and knobs Tape Mechanism STOP Cassette Holder CLOSE Control Panel CLOSE SSAKH0038AWZZ Polyethylene Bag, Unit 92LV1054C Polyethylene Bag, Speaker Polyethylene Bag, Speaker Speaker Cord Ass'y Speaker Cord 92LN1892T Packing Add., Top,Speaker CP-RW5000 CD-CH1000 Energy Star Label Prod. Serial Number Label Fro nt Fro nt 92LN1892B Packing Add., Bottom,Speaker 92LV5840 Center Pad, Speaker Feature Label, CD Changer SPAKA0258AWZZ Packing Add., Left/Right (Serial No. 0060001~00704000 only) Bottom MARKING Top (Serial No. 0060001 ~00704000 only) Right FR ON T Front side of Speakers SPAKA0268AWZZ Packing Add.,Front/Rear (Serial No. 00704001~) Top Left FR ON Top T (Serial No. 00704001~) FR 92LBAG1460C1 Polyethylene Bag, Accessories (Serial No.0060001~ 00704000 only) ON T Front side of Speakers Top AM/FM Loop Antenna Quick Guide Caution Sheet Operation Manual FR ON T Remote Control SPAKZ0629AWZZ Packing Add.,Accessories (Serial No.0060001~ 00704000 only) Not Replacement Item SSAKA0007AWZZ Polyethylene Bag Accessories (Serial No.00704001~) – 14 – TLABR1142AWZZ Bar Code Label SPAKC1041AWZZ Packing Case CD-CH1000 —MEMO— – 15 – CD-CH1000 —MEMO— – 16 – CD-CH1000 COPYRIGHT © 2000 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. SHARP CORPORATION Communication Systems Group Quality & Reliability Control Center Higashihiroshima, Hiroshima 739-0192, Japan Printed in Japan A0008-2637DS•HA•M SC • SL • LAG