Download Sharp CD-MPS900 Service manual

CD-MPS900/CD-MPS99
SERVICE MANUAL
No. S4414CDMPS900
MINI
MINI COMPONENT
COMPONENT SYSTEM
SYSTEM
CD-MPS900
MODEL
CD-MPS900 Mini Component System consisting of CD-MPS900
(main unit) and CP-MPS900 (speaker system).
MINI COMPONENT SYSTEM
MODEL
CD-MPS99
CD-MPS99 Mini Component System consisting of CD-MPS99
(main unit) and CP-MPS99 (speaker system).
In the interests of user-safety the set should be restored to its
original condition and only parts identical to those specified be
used.
CONTENTS
CHAPTER 1. GENERAL DESCRIPTION
[1] Specifications ................................................. 1-1
[2] Names of parts ............................................... 1-2
CHAPTER 2. ADJUSTMENTS
[1] Mechanism section ........................................ 2-1
[2] Tuner section ................................................. 2-1
[3] TEST MODE .................................................. 2-2
[4] CD section...................................................... 2-4
[5] CD Changer mechanism section ................... 2-5
CHAPTER 3. MECHANISM BLOCKS
[1] Caution on diassembly................................... 3-1
[2] Removing and reinstalling the main parts
........ 3-4
CHAPTER 6. CIRCUIT SCHEMATICS AND PARTS
LAYOUT
[1] Schematic diagram ........................................6-1
[2] Wiring side of PWB...................................... 6-11
CHAPTER 7. FLOWCHART
[1] Troubleshooting .............................................7-1
CHAPTER 8. OTHERS
[1] Function table of IC .......................................8-1
[2] FL Display....................................................8-10
Parts Guide
CHAPTER 4. DIAGRAMS
[1] Block diagrams............................................... 4-1
CHAPTER 5. CIRCUIT DESCRIPTION
[1] Notes on schematic diagram.......................... 5-1
[2] Types of transistor and LED........................... 5-1
[3] Waveforms of CD circuit ................................ 5-2
[4] Voltage ........................................................... 5-3
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
CD-MPS900/CD-MPS99
IMPORTANT SERVICE NOTES
BEFORE RETURNING THE AUDIO PRODUCT
BEFORE RETURNING THE AUDIO PRODUCT
(Fire & Shock Hazard)
Before returning the audio product to the user, perform the following
safety checks.
1. Inspect all lead dress to make certain that leads are not pinched or
that hardware is not lodged between the chassis and other metal
parts in the audio product.
2. Inspect all protective devices such as insulating materials, cabinet,
terminal board, adjustment and compartment covers or shields,
mechanical insulators etc.
3. To be sure that no shock hazard exists, check for leakage current in
the following manner.
* Plug the AC line cord directly into a 120 volt AC outlet.
* Using two clip leads, connect a 1.5 kohm, 10 watt resistor paralleled
by a 0.15 µF capacitor in series with all exposed metal cabinet parts
and a known earth ground, such as conduit or electrical ground connected to earth ground.
* Use a VTVM or VOM with 1000 ohm per volt, or higher, sensitivity to
measure the AC voltage drop across the resistor (See diagram).
* Connect the resistor connection to all exposed metal parts having a
return path to the chassis (antenna, metal cabinet, screw heads,
knobs and control shafts, escutcheon, etc.) and measure the AC
voltage drop across the resistor.
VTVM
AC SCALE
1.5 kohms
10 W
TO EXPOSED
METAL PARTS
All check must be repeated with the AC line cord plug connection
reversed.
Any reading of 0.3 volt RMS (this corresponds to 0.2 milliamp. AC.) or
more is excessive and indicates a potential shock hazard which must
be corrected before returning the audio product to the owner.
–i–
0.15 mF
TEST PROBE
CONNECT TO
KNOWN EARTH
GROUND
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 1. GENERAL DESCRIPTION
CHAPTER
[1] Specifications
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
CD-MPS900/CD-MPS99
Tuner
General
Power source
Power consumption
Dimensions
Weight
AC 120 V, 60 Hz
185 W
Width: 10-1/4" (260 mm)
Height: 13" (330 mm)
Depth: 12-7/8" (326 mm)
23.0 lbs. (10.4 kg)
Amplifier
Output power
Output terminals
Input terminals
220 watts minimum RMS per channel into 6
ohms from 100 Hz to 20 kHz, 10% total harmonic distortion
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
Game/Auxiliary (audio signal):
500 mV/47 k ohms
Game/Video: 1Vp-p
CD player
Type
Signal readout
D/A converter
Frequency
response
Dynamic range
5-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Cassette deck
Frequency
response
Signal/noise ratio
50 - 14,000 Hz (normal tape)
Wow and flutter
0.3 % (WRMS)
55 dB (TAPE-1 playback)
50 dB (TAPE-2 recording/playback)
CP-MPS900/CP-MPS99
Type
3-way type speaker system
with passive radiator
Super tweeter x 2
2" (5 cm) tweeter x 1
6-1/2" (16 cm) woofer x 1
4" (10 cm) passive radiator
Maximum input
power
Rated input power
Impedance
Dimensions
440 W
Weight
220 W
6 ohms
Width: 10-7/8" (277 mm)
Height: 13" (330 mm)
Depth: 11" (279 mm)
10.6 lbs. (4.8 kg)/each
Specifications for this model are subject to change without
prior notice.
1–1
CD-MPS900/CD-MPS99
[2] Names of parts
CD-MPS900/CD-MPS99
Front panel
1. Disc Trays
2. Timer Indicator
3. Power On/Stand-by Button
4. Disc Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up Button
5. Clock/Timer Button
6. Tuning Up Button
7. Tuning Down Button
8. Disc Track Down or Fast Reverse, Tape 2 Rewind,
Tuner Preset Down, Time Down Button
9. Equalizer Mode Select Button
10. Tape 1 Cassette Compartment
11. Headphone Jack
12. Game/Video Input Jacks
13. Disc Number Select Buttons
14. Disc Direct Play Button
15. Disc Tray Open/Close Button
16. Character Button
17. Enter Button
18. Disc Play or Repeat, Tape Play Button
19. Memory/Set Button
20. Tape 2 Record Pause Button
21. MP3 Disc Navigation Mode Select Button
22. Disc or Tape Stop Button
23. Cursor Buttons
24. Extra Bass/Demo Mode Button
25. Volume Control
26. Tape 2 Cassette Compartment
27. Tuner (Band) Button
28. CD Button
29. Tape (1 2) Button
30. Game/Video Button
13
1
2
3
14
15
16
17
18
19
20
21
4
5
6
7
22
23
24
8
9
10
25
26
11
27 28 29 30
12
Display
1
2
1. Disc Number Indicators
2. MP3 Folder Indicator
3. MP3 Title Indicators
4. MP3 Total Indicator
5. Sleep Indicator
6. Timer Play Indicator
7. Timer Recording Indicator
8. Tape 2 Record Indicator
9. Daily Timer Indicator
10. FM Stereo Mode Indicator
11. FM Stereo Receiving Indicator
12. Memory Indicator
13. Tape Play Indicator
14. MP3 Disc Indicator
15. Extra Bass Indicator
16. Disc Repeat Play Indicator
17. Disc Pause Indicator
18. Disc Play Indicator
3
4 5 6 7 8 9 10 11 12
13
14 15 16
17
18
Rear panel
1. Cooling Fan
2. AC Power Cord
3. FM 75 Ohms Antenna Terminal
4. FM Antenna Ground Terminal
5. AM Loop Antenna Jack
6. Video Output Jack
7. Speaker Terminals
3
4
5
6
1
7
2
1–2
CD-MPS900/CD-MPS99
CD-MPS900/CD-MPS99
Remote control
1
1. Remote Control Transmitter
2. Disc Number Select Buttons
3. Clock/Timer Button
4. Character Input/Disc Direct Search Buttons
5. MP3 Disc Navigation Mode Select Button
6. Enter Button
7. Memory/Set Button
8. Tape 2 Record Pause Button
9. Disc Track Down or Fast Reverse, Tape 2 Rewind,
Tuner Preset Down, Time Down Button
10. Disc or Tape Stop Button
11. CD Button
12. Tuner (Band) Button
13. Equalizer Mode Select Button
14. Extra Bass Button
15. Power On/Stand-by Button
16. Disc Random Button
17. Character Button
18. Cursor Buttons
19. Disc Clear/Dimmer Button
20. Disc Pause Button
21. Disc Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up Button
22. Disc Play or Repeat, Tape Play Button
23. Tape (1 2) Button
24. Game/Video Button
25. MP3 Disc Display Button
26. Volume Up and Down Buttons
15
2
3
4
16
5
6
17
18
7
8
9
10
11
12
13
14
19
20
21
22
23
24
25
26
CP-MPS900/CP-MPS99
1. Tweeter
2. Passive Radiator
3. Woofer
4. Super Tweeters
5. Speaker Wire
1
4
2
3
1–3
5
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 2. ADJUSTMENTS
CHAPTER
•
Signal generator: 1 kHz, 40 kHz dev., FM modulated
[1] Mechanism section
•
•
FM Band
Coverage
FM RF
Specified Value
Tape 1: Over 80 g
Tape 2: Over 80 g
Frequency
Frequency
Display
—
87.50 MHz
98.00 MHz
(10-30 dB)
98.00 MHz
Setting/
Adjusting
Point
T301 (fL):
1.3 V ± 0.1 V
L312
*1. Input: Antenna
*2. Input: Antenna
Specified Value
Tape 1
Tape 2
30 to 80 g.cm
30 to 80 g.cm
—
70 to 180 g.cm
—
70 to 180 g.cm
Play: TW-2111
Fast forward: TW-2231
•
*1
*2
Normal
speed
Adjusting Point
Variable
Resistor in
motor.
MTT-111
Specified
Value
3,000 ± 30 Hz
Speaker
Output: TP301
Output: Speaker terminal
FM IF
Signal generator: 10.7 MHz, FM modulated
Test
Stage
IF
Tape Speed
Test Tape
Instrument
Connection
Speaker Terminal (Load
resistance: 6
ohms)
Frequency
Frequency
Display
98 MHz
10.7 MHz
Setting/Adjusting Point
T302 (Turn the
core of transformer T302
fully counter
clockwise)
MAIN PWB
TAPE MECHANISM
FM BAND
COVERAGE fL
R381
TP301
T301
CNP301
AM/FM LOOP ANTENNA
Variable Resistor in motor
Figure 1
FM IF
1
FM RF
L312
T303
R356
T306
AM TRACKING
fL
[2] Tuner section
T351
AM IF
T302
IC301
Tape
Motor
TP302
AM BAND
COVERAGE fL
fL: Low-range frequency
fH: High-range frequency
•
Instrument
Connection
Torque Check
Torque Meter
•
Test
Stage
Driving Force Check
Torque Meter
Play: TW-2111
FM RF
AM IF/RF
Figure 2 Adjustment Points
Signal generator: 400 Hz, 30%, AM modulated
Test Stage
Frequency
Frequency
Display
AM IF
AM Band
Coverage
AM
Tracking
450 kHz
—
1,720 kHz
530 kHz
990 kHz
990 kHz
*1. Input: Antenna
*2. Input: Antenna
Setting/
Adjusting
Parts
T351
(fL): T306
1.1 ± 0.1 V
(fL): T303
Instrument
Connection
*1
*2
*1
Output: TP302
Output: TP301
2–1
Instrument
Connection
*1
CD-MPS900/CD-MPS99
[3] TEST MODE
• Setting the test mode
During stand-by mode, press ON/STAND-BY button while pressing
down the
button and X-BASS/DEMO button. then, press the CD
button to enter the test mode.
C D
T E S T
IL isn’t done
OPEN/CLOSE operation is using manual.
<<
>>,<<
>>buttons make pick's slide possible.
A
IL isn’t done
IL isn’t done
to page 2-3
<<PLAY>> key input.
Do TOC IL. Do normal play.
When these following key is input into PLAY key, track number can be appoint directly.
<<
1>> key: Track 4
<<
2>> key: Track 9
<<
3>> key: Track 15
<<MEMORY>>
key input.
Adjustment result automatically will
display as below for each 2 sec:
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
––––––––
<<STOP>> key input.
STOP
explanation:
a) Focus off set
b)Tracking off set
c)Tracking balance
d)Tracking Gain
f) Focus Gain
g) RF level shift
VOL — Last memory
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
= "FOF_XXXX"
= "TOF_XXXX"
= "TBAL_XX"
= "TGAN_XX"
= "FGAN_XX"
= "RFLS_XX"
2–2
CD-MPS900/CD-MPS99
A
<<MEMORY>> key input.
Laser ON.
<<MEMORY>> key input.
Tracking OFF play at that specific point.
<<MEMORY>> key input.
Tracking ON play from that specific point.
<<MEMORY>> key input.
Adjustment result automatically will display as below for each 2 sec :
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
<<STOP>> key input.
STOP
Sliding the PICKUP with<<
in STOP mode.
explanation:
a) Focus off set
b)Tracking off set
c)Tracking balance
d)Tracking Gain
f) Focus Gain
g) RF level shift
VOL — Last memory
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
>>, <<
>> button must only be
= "FOF_XXXX"
= "TOF_XXXX"
= "TBAL_XX"
= "TGAN_XX"
= "FGAN_XX"
= "RFLS_XX"
2–3
CD-MPS900/CD-MPS99
[4] CD section
CD Error code description
Error
01
10*
11*
20*
21*
31
*
Explanation
When Pickup set inner position, inner switch cannot detect
'ON' level for 10 secs.
CAM error. Can't detect CAM switch when CAM is moving.
When it detect cam operation error during initialize process.
TRAY error. Can't detect TRAY switch when TRAY is moving.
When it detect TRAY operation error during initialize process.
When it change to CD function, DSP cannot read initial
data.
'CHECKING'
If Error is detected, 'CHECKING' will be displayed instead of 'ERCD**'. 'ER-CD**' display will only be displayed when error had been
detected for the 5th times.
Standard Specification of Stereo System Error Message Display Contents
CD
TUNER
Error Contents
Pickup Mechanism Error.
CD Changer Mechanism Error.
Display
'ER-CD01'
'ER-CD**' (*)
CD DSP Communication Error.
Focus Not Match/IL Time Over.
PLL Unlock.
'ER-CD31'
'NO DISC'
FM 87.5 MHz
Notes
PU-IN SW Detection NG.
10: CAM SW Detection NG during normal operation
11: CAM SW Detection NG during initialize process
20:TRAY SW Detection NG during normal operation
21:TRAY SW Detection NG during initialize process
DSP COMMUNICATION ERROR.
PLL Unlock.
(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**'. 'ER-CD**' display will only be display when
error had been detected for the 5 th times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had
occurred, it can be check by pressing 'POWER', '
' and 'X-BASS'
button. MicroComputer version number will displayed as "XM******".
Press ‘VIDEO/AUX’ button during version number display and then
press ‘POWER’, ‘MEMORY/SET’ and ‘VIDEO/AUX’ button. Display
will show "S** B**". S is referring to speaker abnormal detection and B
is referring to +B PROTECTION. ** is in hex valve.
+B PROTECTION is condition when irregular process occur on power
supply line.
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts
replacement.
1. Press the ON/STAND-BY button to enter stand-by mode.
2. While pressing down the
button and the X-BASS/DEMO button, press the ON/STAND-BY button. The Micro Computer version
number will be displayed as "XM******".
3. Press OPEN/CLOSE button until "WAIT"→ "FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.
2–4
CD-MPS900/CD-MPS99
[5] CD Changer mechanism section
•
A number in the drawing sheet is the number of the parts guide
(CHANGER MECHANISM PARTS).
1
141
140
HALF GEAR
MUST ARRANGE AS SHOWN
2–5
CD-MPS900/CD-MPS99
2
139
APPLY SANKOL BEFORE FIX
FIX ITEM 1 ACCORDING TO THE
SHOWN PICTURE ABOVE
ROTATE MODE BIG GEAR UNTIL REACH AS SHOWN IN PICTURE
2–6
CD-MPS900/CD-MPS99
3
143
APPLY GREASE
112
PULL THE LEVER UNITIL
REACH THE ARROW MARK
2–7
CD-MPS900/CD-MPS99
4
FIGURE 2
FIGURE 1
152
118
142
APPLY GREASE
SLOT CLAMP SW ARM INSIDE BASE SLOT
2–8
CD-MPS900/CD-MPS99
5
APPLY GREASE AT BOTTOM SIDE
OF GEAR FOLLOW MARKING
NO NEED APPLY GREASE AT BOTTOM
SIDE
APPLY GREASE AT
TOP SIDE OF GEAR
FOLLOW MARKING
127
OTHER THAN FIGURE 1 DIRECTION ALL N.G
O.K
128
N.G
FIGURE 1
BLACK MARK
2–9
CD-MPS900/CD-MPS99
6
APPLY GREASE AT
HALF GEAR AREA
ROTATE CLOCKWISE UNTIL REACH HERE (MAXIMUM)
129
2 – 10
CD-MPS900/CD-MPS99
7
CHANGE COLOR TO BLACK
148
151
150
2 – 11
CD-MPS900/CD-MPS99
8
TRAY BIG GEAR
CHANGE COLOR
TO BLACK
MUST FREE FROM GREASE THE SHOWN AREA
O.K
GREASE APPLICATION LENGTH
GREASE APPLICATION PORTION
N.G
124
TRAY BIG GEAR
CHANGE COLOR
TO BLACK
131
SHOWN HOLE MUST FACING ARROW DIRECTION
2 – 12
CD-MPS900/CD-MPS99
9
APPLY GREASE AT
BOTTOM SIDE ONLY
138
126
TR-RE JOINT GEAR C
125
APPLY GREASE ONLY AT TOP SIDE GEAR
MUST FIX ACCORDING TO THE HOLE'S
2 – 13
CD-MPS900/CD-MPS99
10
148
147
146
145
2 – 14
CD-MPS900/CD-MPS99
11
121
APPLY GREASE
144
130
WHEN FIXING ITEM 2 MUST FOLLOW AS SHOWN
2 – 15
CD-MPS900/CD-MPS99
12
117
FIGURE 1
FIGURE 2
APPLY GREASE
FIGURE 3
2 – 16
APPLY GREASE SC141
CD-MPS900/CD-MPS99
13
ITEM 2 , 3 MUST APPLY GREASE ON TOP SIDE GEAR ONLY
134
133
GEAR 112
O.K
GEAR 112
N.G
132
TOP VIEW AFTER
ASSY
2 – 17
FIX REVERSE N.G
CD-MPS900/CD-MPS99
14
APPLY GREASE BEFORE FIX
MOVE 112 UNTIL TOUCH THE WALL
B
A
DURING GEAR A ROTATE
MUST PRESS SHOWN AREA
AND LEVER B WILL MOVE
ARROW DIRECTION THEN
FIX PART 108
SCREW TORQUE
2
108
+0.5
-0
kgf-cm
803 x6
APPLY GREASE
CONFIRM WHETHER
FIXED
PROPELY OR NOT
2 – 18
CD-MPS900/CD-MPS99
15
APPLY GREASE
115
BEHIND THE LEVER NEED TO APPLY GREASE
PULL IT THEN LEVER WILL
MOVE IN
2 – 19
CD-MPS900/CD-MPS99
16
123
115
APPLY GREASE
APPLY GREASE BEFORE FIX
APPLY GREASE
AT BOSS
SPRING MUST ARRANGE UNDER THE HOOK
O.K
LR JOINT LEV
BOARD R
BOARD R LR JOINT LEV
N.G
2 – 20
CD-MPS900/CD-MPS99
17
ASSY REVERSELY N.G
103
137
136
APPLY GREASE
BIG SLOT MUST FACING OUT
WHEN FIX & AFTER FIX TO BASE CHASSIS
AFTER ASSY CONFIRM THE FREE DROP
GEAR POSITION DURING FIXING
2 – 21
CD-MPS900/CD-MPS99
18
ASSY REVERSELY N.G
APPLY GREASE
114
135
136
BIG SLOT MUST FACING OUT
WHEN FIX & AFTER FIX TO BASE CHASSIS
AFTER ASSY CONFIRM THE FREE DROP
GEAR POSITION DURING FIXING
CONFIRM BOTH GEAR SIT PROPELY & LOCKED
2 – 22
CD-MPS900/CD-MPS99
19
AFTER FIX OUTER UP/DOWN LEVER HOLD SHOWN PORTION AND
MOVE UP/DOWN THEN CONFIRM LEVER GO INSIDE THE HOLE OR NOT
120
IF GO INSIDE HOLE
IS O.K
BIGGER SLOT FACING OUT
IF NO GO INSIDE HOLE IS N.G
119
BIGGER SLOT FACING OUT
2 – 23
CD-MPS900/CD-MPS99
20
BIG SLOT FACING OUT
110
2 – 24
CD-MPS900/CD-MPS99
21
PUSH THE LEVER ACCORDING TO ARROW
DIRECTION THEN FIX
WHEN FIX MAIN BASE ASSY FOLLOW ACCORDING TO O.K PICTURE
O.K
MAKE SURE MECHA HOLDER SHAFT FIX PROPELY TO LEVER
2 – 25
N.G
N.G
CD-MPS900/CD-MPS99
22
APPLY SANKOL
APPLY SANKOL ON TOP
101
APPLY SANKOL INSIDE THE SLOT
& OTHER SHOWN PORTION
RIB
102
RIB
APPLY SANKOL AT TRAY SLIDING PORTION
FIX TRAY NO 1 FIRST THAN
FOLLOW OTHER
2 – 26
COSMO GUIDE TRAY HAVE
MARKING AS SHOWN
CD-MPS900/CD-MPS99
23
111
GEAR UP/DOWN BOARD
APPLY GREASE AT INNER & OUTER GEAR SLIDING PORTION
WHEN FIX GEAR UP/
DOWN BOARD THE
TWO LEVER MUST AT
PARALLEL LINE &
POSITION AT TOP
MAX SIDE
AFTER ASSY GEAR UP/DOWN BOARD
2 – 27
CD-MPS900/CD-MPS99
24
SCREW TORQUE
3
+0.5
-0
804
2 – 28
kgf-cm
CD-MPS900/CD-MPS99
25
AFTER ASSY TOP PLATE
FIX THE FFC
FFC4
AFTER PUSH MAKE SURE SNAP PROPELY
PRESS IN
BACK
PORTION
122
AFTER FIX PUSH FOLLOW ARROW DIRECTION
107
BEFORE LOCK
SLOT IN
AFTER LOCK
BEFORE LOCK
MUST CONFIRM
AFTER LOCK
BEFORE LOCK
AFTER LOCK
MUST CONFIRM
2 – 29
CD-MPS900/CD-MPS99
26
CAUTION
O.K
1. MAKE SURE NO PWB CHIP INSIDE SET .( BEFORE
FIX MAKE SURE PWB NO DUST , GREASE & ETC )
N.G
803
2 – 30
CD-MPS900/CD-MPS99
27
THE TWO SLOT
MUST FREE FROM GREASE
APPLY GREASE BELOW
THE MARKING FOR
BOTH PORTION
ASSEMBLY SEQUENCE
1. APPLY GREASE TO MAIN BASE
GREASE APPLICATION AREA
ALL BOSS
APPLY GREASE
APPLY GREASE
105
APPLY GREASE
APPLY GREASE AT 3 HALF MOON
1 RIB ONLY
CAUTION
APPLY GREASE
TRAY SLIDING
AREA MUST
FREE FROM
GREASE
APPLY GREASE
AT BOTH SLOT
APPLY GREASE
APPLY GREASE
INSIDE SLOT
APPLY GREASE
APPLY GREASE AT WALL
2 – 31
CD-MPS900/CD-MPS99
28
MOTOR SCREWING HOLE
SCREW TORQUE
1.5
13.8 + 0.2
-0
MUST HAVE GAP
M1,2
12.2 +- 0.1
REFERENCE ONLY
MOTOR GEAR HEIGHT FROM
MAIN BASE 12.2 +- 0.1
+ 0.5
-0
AFTER SCREW MOTOR,CONFIRM THE
ARRANGEMENT AS IN FIGURE 2
FIGURE 2
801
APPLY GREASE
2 – 32
CD-MPS900/CD-MPS99
29
3.1 + 0.1
APPLY SANKOL
SHAFT X 3 DIM AFTER INSERTION
MUST CONFIRM EVERYDAY
SANKOL APPLICATION AREA
109-2
APPLY GREASE AT THE SLIDING PORTION
114
APPLY GREASE
116
UP / DOWN
HOLDER CHANGE
TO NATURE
COLOR
2 – 33
CD-MPS900/CD-MPS99
30
BEFORE MELT IT
AFTER MELT IT ( MUST FLAT )
WHEN FITTING STABILIZER PLATE TO STABILIZER,
ROTATE STABILIZER ANTI CLOCKWISE BY JIG
( BY HAND CANNOT X )
CHANGE COLOR
TO NATURE
BELOW
2 – 34
AFTER ASSY TO HOLDER
STABILIZER NEED CLEAN
WITH ALCOHOL DISC
TOUCHING SURFACE
CD-MPS900/CD-MPS99
31
104
APPLY GREASE
MUST MAKE SURE SNAP PROPELY BOTH SIDE
ALL SURFACE MUST TOUCH
GAP
N.G
O.K
2 – 35
N.G
CD-MPS900/CD-MPS99
32
NO GAP
HAVE GAP
O.K
N.G
2 – 36
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 3. MECHANISM BLOCKS
CHAPTER
[1] Caution on diassembly
Caution on Disassembly
Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange
the leads where they were before disassembling.
CD-MPS900/CD-MPS99
STEP
REMOVAL
PROCEDURE
1
Top/Side Cabinet 1. Screw .................... (A1) x11
2
Changer Unit/
Rear Panel B
1. Screw ......................
2. Hook ........................
3. Flat Cable................
4. Socket .....................
Main PWB
(B1) x2
(B2) x2
(B3) x1
(B4) x1
3
Rear Panel A with 1. Screw ...................... (C1) x8
Fan motor
2. Socket ..................... (C2) x1
4
Main PWB
5
(B2)x1
Tape Mechanism 1. Open the Cassette Cover.
2. Screw ....................... (F1) x6
3. Flat Cable ................ (F2) x1
7
Display PWB
Game Input PWB 1. Screw...................... (H1) x2
9
CD Servo PWB
(B1)x2
φ3x10mm
Changer
Mechanism Unit
1. Screw ...................... (K1) x4
2. Changer Chassis .... (K2) x1
11
CD Mechanism
1. Screw ....................... (L1) x4
Pull
Rear
Panel A
(C1)x6
φ3x10mm
1. Screw ....................... (J1) x3
2. Flat Cable ................ (J2) x2
3. Socket ...................... (J3) x1
4. Hook ......................... (J4) x1
10
Lug Wire
(C1)x2
φ3x6mm
Main PWB
Fan Motor
(D1)x2
φ3x10mm
(D2)x1
Note:
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electrostatic damage.
(D3)x2
(D3)x1
(E2)x1
Front Panel
Top/Side Cabinet
(E3)x1
Front Panel
(A1)x3
φ3x10mm
Front Panel
(B2)x1
1. Knob ........................ (G1) x1
2. Screw .................... (G2) x10
3. Hook ........................ (G3) x5
8
(B4)x1
Rear
Panel B
1. Screw ...................... (E1) x2
2. Flat Wire .................. (E2) x1
3. Hook ........................ (E3) x2
6
Pull
Changer
Mechanism
Unit
1. Screw ...................... (D1) x2
2. Flat Cable ............... (D2) x1
3. Socket ..................... (D3) x4
4. Flat Wire .................. (D4) x1
5. Screw ...................... (D5) x5
Front Panel
CD Servo (B3)x1
PWB
(C2)x1
Rear Panel B
(D5)x5
φ3x6mm
Power PWB
(D4)x1
(D3)x1
(E3)x1
Fan Cover
Main PWB
Rear Panel A
(A1)x5
φ3x10mm
(E1)x2
φ3x8mm
(A1)x3
φ3x10mm
3–1
CD-MPS900/CD-MPS99
(F2)x1
Front Panel
(K1)x4
φ3x10mm
Tape
Mechanism
Lug Wire
Open
(F1)x6
φ3x10mm
(K2)x1
Cassette
Cover
Lug Wire
Changer
Mechanism
Unit
Front Panel
Display PWB
(G2)x10
φ2.6x10mm
(G3)x5
(L1)x4
φ2.6x10mm
(G1)x1
CD Mechanism
Spacer PWB
Game Input
PWB
(H1)x2
φ3x10mm
(J1)x3
φ3x10mm
Changer
Mechanism
Unit
(J4)x1
(J3)x1
CD Servo
PWB
(J2)x1
Changer
Mechanism
Unit
(J2)x1
3–2
CD-MPS900/CD-MPS99
CP-MPS900/CP-MPS99
STEP
REMOVAL
PROCEDURE
1
Passive Radiator 1. Screw ...................... (A1) x4
2. Side Panel .............. (A2) x1
3. Screw ...................... (A3) x4
2
Woofer
3
Tweeter
1. Screw ...................... (C1) x2
4
Super Tweeter
1. Screw ...................... (D1) x4
1. Front Panel ............. (B1) x1
2. Screw ...................... (B2) x4
Tweeter
(A3)x4
φ4x16mm
(C1)x2
φ3x12mm
Front Panel
Super Tweeter
Speaker Box
Passive Radiator
(D1)x2
φ3x12mm
Super Tweeter
(A2)x1
(D1)x2
φ3x12mm
(A1)x4
φ4x35mm
Passive Radiator
(B2)x4
φ4x16mm
(B1)x1
Screwdriver
Speaker Box
Driver should
be pried away
from Speaker Box.
3–3
Speaker Box
Woofer
CD-MPS900/CD-MPS99
[2] Removing and reinstalling the main parts
1. TAPE MECHANISM SECTION
Perform steps 1 to 5 and 6 of the disassembly method to remove the
tape mechanism.
1.1. How to remove the record/playback and erase heads
(TAPE 2) (See Fig. 1)
1. When you remove the screws (A1) x 2 pcs., the recording/playback head and three-dimensional head of the erasing head can be
removed.
Pinch Roller
(C1)x1
TAPE 2
<A>
Pull
Clutch Ass'y
Pinch
Roller
Pawl
<B>
Figure 3
Record/Playback
Head
1.4. How to remove the belt (TAPE 2) (See Fig. 4)
1. Remove the main belt (D1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (D2) x 1 pc.
1.5. How to remove the belt (TAPE 1) (See Fig. 4)
Erase Head
1. Remove the main belt (E1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (E2) x 1 pc.
(A1)x2
φ2x9mm
TAPE 2
Figure 1
FF/REW
Belt
(D2)x1
Tape
Motor
1.2. How to remove the playback head (TAPE 1)(See Fig. 2)
1. When you remove the screws (B1) x 2 pcs., the playback head can
be removed.
Tape
Motor
TAPE 1
TAPE 2 Main Belt
Main Belt (E1)x1
(D1)x1
TAPE 1
Main Belt
(D1)x1
Main Belt
(E1)x1
TAPE 1
FF/REW
Belt
(E2)x1
Clutch Ass'y
Figure 4
Playback
Head
1.6. How to remove the motor (See Fig. 5)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
Tape
Motor
(B1)x2
φ2x9mm
Clutch Ass'y
Figure 2
1.3. How to remove the pinch roller (TAPE 1/2) (See Fig. 3)
(F1)x2
φ2.6x5mm
1. Carefully bend the pinch roller pawl in the direction of the arrow
<A>, and remove the pinch roller (C1) x 1 pc., in the direction of the
arrow <B>.
Note:
When installing the pinch roller, pay attention to the spring mounting
position.
Figure 5
3–4
CD-MPS900/CD-MPS99
2. CD MECHANISM SECTION
Perform steps 1, 2, 9, 10 and 11 of the disassembly method to remove
the CD mechanism.
Reduction gear C
2.1. Remove the pickup. (See Fig. 1)
1. Remove the stop washer (A1) x 1 pc., to remove the gear (A2) x 1
pc.
2. Remove the screws (A3) x 2 pcs., to remove the shaft (A4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the connector
wrap the conductive aluminium foil around the front end of connector
so as to protect the optical pickup from electrostatic damage.
(A3)x2
φ2.6x6mm
Front
Rear
Figure 3
2. In another case, if CD mechanism is at tray No.1 play position and
to remove CD located in tray No.3, the procedure is as follows:
If the gear up down board is located at tray No.1 position, then
rotate gear clock-wise until it at stock position. Rotate reduction
gear D clockwise (Figure 4) to move the CD mechanism to tray
No.3 position.This is confirmed by checking the gear up down
board position by the marking as indicated on the main chassis as
shown in Figure 5.
CD Mechanism
Reduction gear D
Shaft
(A4)x1
Gear
(A2)x1
Stop Washer
(A1)x1
Pickup Unit
Up
Figure 1
Down
Figure 4
3. CHANGER MECHANISM SECTION
Perform steps 1, 2, 9 and 10 of the disassembly method to remove the
CD changer mechanism.
3.1. How to remove CD Disc (See Fig. 2~5)
1. When CD is at play position (Figure 2), rotate reduction gear C
clock-wise as shown in Figure 3 Until disc tray is at stock position,
then rotate further to eject the disc tray so that CD can be removed
from the tray.
Gear up down board
CD Disc
Disc Tray
Guide Tray
Mark 1
Mark 3
Mark 5
(DISC 3)
(DISC 1)
(DISC 5)
Mark 2
Mark 4
(DISC 2)
(DISC 4)
Figure 5
CD At play position.
CD Disc
CD At stock position.
Figure 2
3–5
CD-MPS900/CD-MPS99
3.2. How to Remove the tray motor/main cam motor/5Changer Motor PWB (See Fig. 6)
1. Remove the screws (A1)x 2 pcs., to remove tray motor/main cam
motor/5-Changer Motor PWB.
Changer Mechanism Unit
Main Cam Motor
(A1)x2
φ2x10mm
Tray Motor
5-Changer
Motor PWB
Figure 6
NOTE: There are 2 more screws tighten the motors at the bottom of
main chassis. Before performing procedure 1 above, disc stop
spring, top plate sear up down board and trays must be
removed, then only the 2 screws can be untighten.
3–6
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 4. DIAGRAMS
CHAPTER
[1] Block diagrams
TRAY_SW2
PHOTO
D_GND
+5V(+B9)
SUB CE
NC
8
7
6
5
4
3
2
1
59 69
41 LVDD
MO_B-/CONT2 35
45 RVDD
MO_B+/CONT3 36
42 LCHO
M0_SPEED/CONT6 70
44 RCHO
47
IC1
LC78648E
CD SERVO
XOUT
XL1
48
16.9344 MHz
XIN
20
LDS
19
LDD
C2F/SBCK
51 53
F16MOUT
CE
CL
DI
DO
*WRG
ZD1
*RES
DRF
68 67 66 65 64 63 62
DATA
TRAY_SW1
9
F16MIN
CLAMP
CNP5 16 15 14 13 12 11 10
DISC
CE
8
DI
+5V
7
DO
+8V
6
DRF
D_GND
5
WRQ
+5V
4
CD_RES
DGND
3
+B7
L-CH
2
+B4
AGND
1
+B8
R-CH
CNP2
CL
TO DISPLAY SECTION
TO MAIN SECTION
MOT_A+/CONT5 74
MOT_A-/CONT4 75
FDO 21
TDO 22
SLDO 23
SPDO 24
32
61
BIN
CIN
AIN
DIN
EIN
15 14 10
9
8
7
40 28 25
+3.3V
49 80 60 27 26 1
FIN
AVDD1
AVDD2
DVDD
DVDD
VVDD
PU-IN/CONT1 34
XVDD
79
Q2
+3.3V
Q1
4
3
2
1
PHOTO
DISC
CLAMP
TRAY_SW1
TRAY_SW2
D_GND
11 10 9
8
7
6
5
4
3
2
1
GND
PICKUP UNIT
Figure 4-1 BLOCK DIAGRAM (1/4)
4–1
TRACKING COIL
FOCUS COIL
TRAY SW2
SW3
SW2
TRAY SW1
M
M1
TRAY
MOTOR
SW4 RX1
DISC
M2
MAIN CAM
MOTOR
-
PHOTO
INTERRUPTER
M
+
+
-
LASER
DRIVER
SW1
CLAMP
5
CAM+
6
CAM-
7
+5V
CNP6A
8
TR+
11 10 9
TR-
CNP6
NSW1
PICKUPIN
CD-MPS900/CD-MPS99
DRASB 16
ADRS3 21
22 VCC
50 ADRSB
ADRS8 28
ADLRCK
ADBCK
ADDATA
LRSY
CKOUT
1
43 44 45 68 61 51 31 21 11 77 73 66
+3.3V
FSYNC
MP3 DO
INTB
+5V
VDD
VDD
14 12 30
16 SYS-CL
9 PVCC1
VO1+
VO1-
35 36
5
2
6
VO2-
VO4+
VO4-
1
VO2+
VO3+
VO3-
10 REGOUT
3
4
33
18 SYS-DO
34
19 SYS-DI
32
25 RESET
IC2
LA6261
FOCUS/TRACKING/
SPIN/SLED DRIVER
M-
NM1
SPINDLE
MOTOR
M-
CE 10
X1
X2
27
26
XL2
4.19 MHz
+
NM2
SLED
MOTOR
IC5
IXA006AW
MICROCOMPUTER
31
+
NSW1
PICKUPIN
15 SYS-CE
29
AVDD
24
43 17
Figure 4-2 BLOCK DIAGRAM (2/4)
4–2
CL 11
28 44 37 24 23 9
1
INTB
MDATA15 43
21
27 SVCC
CMDOUT
FSYNC
DVDD1
DVDD2
DVDD3
DVDD4
DVDD5
CASLB
DVDD6
MDATA12 40
MO_B-
MO_B+
MOT_A-
23 22
MOT_A+
VIN2
VIN1
VIN3
VIN4
28 PVCC2
20 19
20
22
32
52
69
60 ADRS0
Q3
Q4
Q5
17 15 11 13
8
62
53 ADRS7
MDATA11 38
6
10
MDATA8 35
30 DCASUB
31 DCASLB
2
14
42 WEB
ADRS4 24
29 D0EM
3
IC3
LC78683E
MP3 DECODER
41 RASB
OEB
+3.3V
+5V
2
4
12
40 MDATA15
ADRS0 18
6 VCC
3
5
33 MDATA8
DWEB 15
1 VCC
7
30 MDATA7
MDATA7 10
44
CASUB
1
MDATA4 7
39
IC6
SI3033LUS
VOLTAGE
REGULATOR
23 MDATA0
DATAIN
MDATA3 5
23
DATACK
80 79 9
MDATA0 2
CKIN(16M)
C2FIN
IC4
L8316V35
D-RAM
76
75
CD-MPS900/CD-MPS99
+B4
IC301
TA7358AP
FM FRONT END
Q302
AM TRACKING
Q707
Q708
Q714~
Q717
SOLENOID
DRIVER
+B4
7
VCO
FM/AM
MO/ST
12
CE
DI
CLK
DO
11
3 4 5 6
9 10
17
21
+B4
Q360 FM
+B4
JK690
GAME INPUT
L
AUX
R
23
L 9
R 16
TAPE L 10
R 15
L 11
TUNER
R 14
CD L 12
R 13
VIDEO
CNS601 BI601
1
2
3
1
3
4
TAPE 1 L-CH
P.B. HEAD R-CH
REC.
P.B.
TAPE 2
L-CH
REC./P.B. R-CH
HEAD
AC BIAS
16
SWITCHING
Q101~
Q104
L(T1) 1
R(T1) 24
L(T2) 2
R(T2) 23
POP REDUCE 6
L REC 9
R REC 16
11
12
15
T1/T2
REC
IC601
LC75341
AUDIO PROCESSOR
7 18
+B4
13
P.B
21 R
4 L
NOR/
HIGH T1/T2 10 ALC
REC/PLAY
IC101
AN7345K
PLAYBACK AND RECORD/
PLAYBACK AMP.
T1/T2
BIAS
JOG701
VOLUME
Q113
SWITCHING
Q111
L103
BIAS
OSC
Q603
Q604
7 L REC
18 R
19
Q112
-20dB
ATT Q601
Q602
3
Q107
Q108
MUTING
4 L PB
21 R
H/N
DI 1
CE 2
CLK 24
SWITCHING
Q105
Q114
Q106
SWITCHING
+B4
ERASE
HEAD
14
15
SWITCHING
JK691
VIDEO OUT
CNP2
FROM CD SECTION
22 15 16
OSC
FM+B
TAPE
MECHANISM
ASS'Y
1
MO/ST
20
18
L
R
+B4
Q109
SWITCHING
LED
DRIVER
Q110
+B4
BIAS
Figure 4-3 BLOCK DIAGRAM (3/4)
4–3
Q710
LED703
30
58
48
IC701
IXA008AW
SYSTEM
MICROCOMPUTER
(2/2)
SYSTEM
+B7
IC302
LC72131
PLL(TUNER)
17 13
8
IC303
LA1832S
FM IF DET./
FM MPX./
AM IF
X352
4.5 MHz
VT
+B7
7
AM BAND
T306 COVERAGE
T303
MOTOR
DRIVER
Q706
Q711
Q712
21
FM/AM
CNP301
4 5 9
FM
MPXIN DET
24 23
OSC BUFF
X351
456 kHz
CF351
AM IF
1 2
T301
FM
OSC
1
2
450 kHz
CF352
T351
AM IF
FM/AM GND
OUT
FM+B
9
AM MIX
FM RF L312
AM LOOP
ANTENNA
8
STEREO
7
AM OSC IN
5
AM RF IN
3 4
CF303
FM
OSC
SO302
FM ANTENNA
TERMINAL
10.7 MHz
FM IF
T302
6
1
BF301
B.P.F
ZD351
5.1V
AM OSC OUT
FM
ANTENNA
CD-MPS900/CD-MPS99
FL701
FL DISPLAY
1 2
50 51
27 ~ 47
8 ~ 26
4 5
TAPE
MECHANISM
ASS'Y
+B5
VDD
~
KEY
SW701-SW707
SW712-SW723
SW725-SW735
53
10 11 12
16 21 24 20 17 18 19
CE
CLK
DI
DO
VDD
31
56
15
41
+B5
XL701
4.19 MHz
+B5
+B5
~
1 2 3 4 5 6 7
AVDD 34
33
VDD
~
97
+B5
RX701
REMOTE
3 SENSOR 1
2
~
80
IC701
IXA008AW
SYSTEM
MICROCOMPUTER
(1/2)
RESET
79 VLOAD
39
~
78
99
100
59 40 25 13 27
28 26 47 46
38
58
TO CD
SECTION
+B8
RESET Q709
+B5
FAN MOTOR
DRIVER
Q906
SP DET.
M
D905~D907
SYSTEM
MUTE
603
604
IC901
STK41244
POWER AMP.
L 18
R 14
7
6
5
2
SO901
SPEAKER
TERMINAL
Q901~
Q904
SP RELAY Q905
ON-OFF
RL914
11 L-OUT
8 R-OUT
1
Y
M901
FAN
MOTOR
+B7
JK701
HEADPHONES
PT801
MAIN POWER
TRANSFORMER
D801
+B1
-B1
F802
5A/125V
-B2
D802
+B2
M+13V
A+10V
A_+5V
+B9
SW5V
+B6
7
2
6
F804
2A/125V
3
1 +5V
D803,
D804
D+5V
+B8
F805
6A/125V
RL841
F803
2A/125V
Q801 VOLTAGE
REGULATOR
AC_RLY
R
+B5
UNSW_5.6V
T.F.
D863
RELAY
DRIVER
Q841
D842~
D845
IC854
1
AN78L05
VOLTAGE REGULATOR
3
PT841
SUB POWER
TRANSFORMER
Figure 4-4 BLOCK DIAGRAM (4/4)
4–4
AC POWER
SUPPLY CORD
AC 120 V, 60 Hz
VF2
-VF
BIAS
VF1
/T2
LD+8V
+B3
+B7
+B4
F801
5A/125V
IC851
AN80T53
MULTI REGULATOR
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 5. CIRCUIT DESCRIPTION
CHAPTER
•
The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given.
[1] Notes on schematic diagram
•
•
•
1. In the tuner section,
indicates AM
indicates FM stereo
Resistor:
To differentiate the units of resistors, such symbol as K and M are
used: the symbol K means 1000 ohm and the symbol M means
1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type.
Capacitor:
To indicate the unit of capacitor, a symbol P is used: this symbol P
means pico-farad and the unit of the capacitor without such a symbol is microfarad. As to electrolytic capacitor, the expression
“capacitance/withstand voltage” is used.
(CH), (TH), (RH), (UJ): Temperature compensation
(ML): Mylar type
(P.P.): Polypropylene type
2. In the main section, a tape is being played back.
3. In the deck section, a tape is being played back.
( ) indicates the record state.
4. In the power section, a tape is being played back.
5. In the CD section, the CD is stopped.
•
Parts marked with “
“(
) are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the
set.
Schematic diagram and Wiring Side of P.W.Board for this model are
subject to change for improvement without prior notice.
REF. NO
JOG701
NSW1
SW1
SW2
SW3
SW4
SW701
SW702
SW703
SW704
SW705
SW706
SW707
SW712
SW713
SW714
SW715
SW716
DESCRIPTION
REF. NO
SW717
SW718
SW719
SW720
SW721
SW722
SW723
SW725
SW726
SW727
SW728
SW729
SW730
SW731
SW732
SW733
SW734
SW735
POSITION
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
VOLUME
PICKUP IN
CLAMP
TRAY SW1
TRAY SW2
DISC
POWER ON/STAND-BY
CLOCK/TIMER
TUNING UP
TUNING DOWN
FAST REWIND/PRESET DOWN
EQUALIZER
FAST FORWARD/PRESET UP
TUNER (BAND)
CD
TAPE
GAME/VIDEO
X-BASS/DEMO
DESCRIPTION
LEFT
UP
CHARACTER
RIGHT
ENTER
DOWN
MP3 NAVIGATION
PLAY/REPEAT
STOP
REC/PAUSE
MEMORY/SET
OPEN/CLOSE
DIRECT PLAY
DISC2
DISC4
DISC5
DISC3
DISC1
[2] Types of transistor and LED
FRONT
VIEW
B
(3)
TOP
VIEW
E
(1)
TOP VIEW
TOP VIEW
DS1SS133
1N4004S
C
(2)
E C B
(S)(G)(D)
(1)(2)(3)
KRC104 M
KTA1266 GR
KTA1271 Y
KTA1273 Y
KTA1274 Y
KTC3194 Y
KTC3199 GR
KTC3200 GR
KTC3203 Y
KRA107 S
KRC102 S
KRC104 S
KTA1504 Y
KTC3875 GR
2SD601 AR
TOP VIEW
FRONT
VIEW
AC
KDS184
FRONT
VIEW
AC
D10XB60F
5–1
304VT2H3
SDPB50CD
POSITION
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
ON—OFF
CD-MPS900/CD-MPS99
[3] Waveforms of CD circuit
Stopped
CH1=500 mV
DC 10:1
CH3=500 mV
DC 10:1
T
1
IC1 21
Stopped
CH1=200 mV
DC 10:1
500 ms/div
(500 ms/div)
NORM:20 kS/s
T
1999/04/07 09:51:15
500 ms/div
(500 ms/div)
NORM:20 kS/s
CH2=500 mV
DC 10:1
FDO
1
T
FDO
1
IC1 21
2
6
IC1 24
1
TDO
2
IC1 22
3
SPDO
CH1
v/DIV
500 mV
=Filter=
Smoothing : ON
BW : FULL
=Offset=
CH1 :
0.000 V
CH2 :
0.0 V
CH3 :
0.000 V
CH4 :
0.00 V
Stopped
CH1=500 mV
DC 10:1
1
IC1 21
3
IC1 68
CH2=10 V
DC 10:1
=Record Length=
Main :
100 K
Zoom :
2K
CH3=1 V
DC 10:1
=Filter=
Smoothing : ON
BW : FULL
=Trigger=
Mode : AUTO
Type : EDGE CH1
Delay :
0.0 ns
Hold off :
0.2 µs
Stopped
CH1=500 mV
DC 10:1
500 ms/div
(500 ms/div)
NORM:20 kS/s
T
2
IC1 76
CH3=1 V
DC 10:1
=Trigger=
Mode : NORMAL
Type : EDGE CH2
Delay :
2.924 ms
Hold off :
0.2 µs
1999/04/05 17:33:17
CH4=1 V
500 ms/div
(500 ms/div)
DC 10:1
NORM:20 kS/s
3
4
DRF
PD02
IC1 77
T
TE
IC1 17
=Record Length=
Main :
100 K
Zoom :
2K
PD01
7
FDO
1
8
4
=Offset=
CH1 :
0.000 V
CH2 :
0.000 V
CH3 :
0.00 V
CH4 :
0.00 V
3
CH Position To
-3 div
-1 div
0 div
=Filter=
=Offset=
Smoothing : ON
CH1 :
0.000 V
BW : FULL
CH2 :
0.0 V
CH3 :
0.00 V
CH4 :
0.00 V
1
CH2
Position
0.20 div
+1 div
+3 div
=Record Length=
Main :
100 K
Zoom :
2K
IC1 21
FDO
1
CH1
v/DIV
500 mV
=Trigger=
Mode : AUTO
Type : EDGE CH1
Delay :
0.0 ns
Hold off :
0.2 µs
=Filter=
Smoothing : ON
BW : FULL
Stopped
CH1=2 V
DC 10:1
=Offset=
CH1 :
0.000 V
CH2 :
0.0 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
100 K
Zoom :
2K
T
=Trigger=
Mode : AUTO
Type : EDGE CH2
Delay :
0.0 ns
Hold off :
0.2 µs
1999/04/07 09:25:28
500 ns/div
(500 ns/div)
NORM:200 MS/s
T
5
9
IC1 4
IC1 39
DOUT
=Filter=
Smoothing : ON
BW : FULL
Vp-p=1.0 V~1.3 V
0.5 mV/div,0.5 µsec/div
Stopped
CH1=10 V
DC 10:1
1
T
CH2=1 V
DC 10:1
Stopped
CH1=2 V
DC 10:1
100 ms/div
(100 ms/div)
NORM:100 kS/s
10
=Offset=
CH1 :
0.00 V
CH2 :
0.00 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
1K
Zoom :
100
T
CH2=2 V
DC 10:1
CH3=2 V
DC 10:1
=Trigger=
Mode : NORMAL
Type : EDGE CH1
Delay :
2.887 ms
Hold off :
0.2 µs
1999/04/05 20:50:17
5 µs/div
(5 µs/div)
NORM:100 kS/s
IC1 57
TE
4
IC1 17
1
2
LRSY
11
IC1 58
2
DATACK
3
IC1 68
T
1
DRF
12
IC1 59
T
3
DATA
=Filter=
Smoothing : ON
BW : FULL
=Offset=
CH1 :
0.0 V
CH2 :
0.00 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
100 K
Zoom :
2K
=Trigger=
Mode : NORMAL
Type : EDGE CH1
Delay :
2.924 ms
Hold off :
0.2 µs
=Filter=
Smoothing : ON
BW : FULL
5–2
CH3
v/DIV
2V
=Offset=
CH1 :
0.00 V
CH2 :
0.00 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
5K
Zoom : 100
=Trigger=
Mode : AUTO
Type : EDGE CH3
Delay :
0.0 ns
Hold off :
0.2 µs
CD-MPS900/CD-MPS99
[4] Voltage
VOLTAGE
3.20 V
1.61V
1.61 V
1.60 V
1.61 V
3.08 V
1.65 V
1.65 V
1.65 V
1.65 V
1.48 V
0V
1.65 V
0V
1.65 V
1.47 V
1.48 V
0V
0V
0V
1.60 V
0V
1.61 V
1.61 V
0V
0V
3.20 V
0V
3.20 V
0V
0V
1.59 V
1.60 V
3.20 V
0V
0V
0V
0V
0V
0V
3.61 V
0V
0V
1.80 V
3.60 V
0V
1.45 V
1.49 V
3.19 V
3.79 V
0V
0V
0V
0V
0V
0V
0V
0V
0V
3.20 V
0V
0V
0.53 V
0V
5.16 V
5.18 V
4.68 V
0V
0V
0V
0V
0V
0V
4.86 V
4.86 V
3.01 V
0V
1.12 V
0V
3.20 V
IC301
IC2
IC1
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
VOLTAGE
2.10 V
2.20 V
2.10 V
2.20 V
2.10 V
2.20 V
0V
4.37 V
5.02 V
3.20 V
1.62 V
1.65 V
1.62 V
1.65 V
1.62 V
0V
1.62 V
1.64 V
4.71 V
4.71 V
3.92 V
3.11 V
3.10 V
2.50 V
1.65 V
0V
5.02 V
8.68 V
5.02 V
0.59 V
0.71 V
0V
0V
0V
2.11 V
2.20 V
IC101
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
VOLTAGE
0V
0V
0.57 V
2.03 V
0.44 V
0V
0V
0.58 V
3.45 V
3.35 V
0V
0V
6.97 V
4.16 V
0V
3.42 V
0.57 V
0V
0V
0.41 V
2.03 V
0.57 V
0V
0V
PIN
NO.
1
2
3
4
5
6
7
8
9
IC601
VOLTAGE
0V
0V
0.29 V
0.20 V
0V
0.29 V
0.26 V
0.29 V
0.29 V
IC302
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
VOLTAGE
2.57 V
0V
0V
0V
0V
5.22 V
10.18 V
4.76 V
0V
0V
5.23 V
0V
5.23 V
0V
0V
2.59 V
5.24 V
0V
0V
10.18 V
0V
2.57 V
VOLTAGE
0V
0V
0V
5.10 V
5.10 V
5.10 V
5.10 V
5.11 V
5.10 V
5.10 V
5.10 V
5.10 V
5.10 V
5.10 V
5.10 V
5.10 V
5.10V
5.10 V
5.10 V
5.10 V
5.10 V
5.10 V
10.20 V
0V
IC901
IC303
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
VOLTAGE
1.97 V
5.15 V
1.97 V
1.96 V
0V
0V
5.21 V
3.59 V
5.15 V
0V
2.01 V
1.25 V
2.27 V
1.13 V
1.10 V
1.96 V
0V
1.29 V
2.08 V
1.29 V
1.95 V
1.95 V
5.15 V
3.65 V
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
VOLTAGE
52.80 V
21.60 V
9.60 V
-9.70 V
-21.60V
-48.80 V
0V
-19.70 V
-22.90 V
-22.10 V
-18.60 V
-51.30 V
51.40V
-0.14 V
-0.13 V
-50.04 V
-0.14 V
-0.14 V
IC851
PIN
NO.
1
2
3
4
5
6
7
5–3
VOLTAGE
5.22 V
13.11 V
20.66 V
0V
19.72 V
10.22 V
8.67 V
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
IC701
PIN
NO.
51
4.74 V
52
4.65 V
53
0V
54
4.70 V
55
4.72V
56
4.72 V
57
0V
58
0V
59
0V
60
4.83 V
61
2.27 V
62
1.99 V
63
0V
64
4.73 V
65
0V
66
4.74 V
67
0V
68
0V
69
5.22 V
70
0V
71
0V
72
4.68 V
73
0V
74
0V
75
0V
76
5.20 V
77
0V
78
5.01 V
79
5.01 V
80
2.64 V
81
5.01 V
82
5.01 V
83
0V
84
0V
85
5.01 V
86
1.67 V
87
5.20 V
88
5.01 V
89
4.87 V
90
0V
91
2.02 V
92
0V
93
13.10 V
94
0V
95
0V
96
4.74 V
97
0V
98
4.61 V
99
0V
100
0V
VOLTAGE
VOLTAGE
0V
0V
0V
0V
5.17 V
5.17 V
-29.70 V
0V
-0.26 V
-0.24 V
-0.22 V
-0.20 V
-0.19 V
-0.19 V
-0.18 V
-0.17 V
-0.16 V
0V
-29.90 V
-29.90 V
-29.90 V
-29.90 V
-29.90 V
-19.76 V
-27.40 V
-24.87 V
-22.29 V
-22.30 V
-30.13 V
-27.43 V
-14.50 V
-27.20 V
-19.30 V
-6.08 V
-21.85 V
-27.22 V
-21.89 V
-17.00 V
-27.38 V
-27.10 V
-27.07 V
-27.00 V
-27.00 V
-27.35 V
-26.27 V
-27.11 V
-27.00 V
-27.07 V
-27.07 V
-26.83 V
CD-MPS900/CD-MPS99
— MEMO —
5–4
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 6. CIRCUIT SCHEMATICS AND PARTS LAYOUT
CHAPTER
[1] Schematic diagram
A
CD SERVO PWB-C
C32
C31
C30
C73
C28
C72
C27
CD SIGNAL
100P(CH)
0.022
100P(CH)
100P(CH)
100P(CH)
100P(CH)
100P(CH)
1K
1K
1K
1K
1K
1K
1K
R47
R46
R45
R44
R43
R42
R41
+B
+B
5V
+B
R7
47
C1
47/25
+B
0.022
5V
10
9
8
PD
7
6
5
C
4
3
2
1
C5
0.047
RM2
4.7K
R10
4.7K
10K
4.7K
R96
R99
2.2M
1
2
3
4 RF
3
8
12
11
10
5
7
TP2
4
SLDO
SPDO
AVSS
AVDD2
DVDD
DVSS
VPB
DEFECT
FSEQ
EFLG
FSX
PU-IN/CONT1
M0_B-/CONT2
MO_B+/CONT3
MONI1
MONI2
DOUT
TEST
2
FO+
R37
R36
R35
R34
R33
R32
R31
390
390
390
390
390
390
390
R30
390
+B
+B
R27
100
C17
0.022
R14
R13
R16
R15
D
+B
C25
0.01
+B
+B
R23
2.2K
C20
330/6.3
C34
0.01
C82
9
6.8K
8.2K
6.8K
6.8K
1
C18
GND
C23
0.0015
(ML)
R25
10K
100/10
VR
LD
1K
2.2K
2.2K
TR-
TR-
0.0033
6
R18
R49
R8
FO-
AVDD1
SLCO
EFMIN
C8
0.0027
TDO
FO+
R17
4.7K
R29
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 DVDD
150
+B
60
DATA
59
DATACK 58
R12
LRSY 57
330
ASDFIN 56
LPF
5
ASDACK 55
0.01
C6
6 JITTC
ASLRCK 54
100P
C12
7 AIN
F16MOUT 53
(CH)
R56
8 CIN
OUT1 52
4.7K
9 BIN
F16MIN 51
IC1
10 DIN
IOMODE 50
C33 0.056
LC78648E
FEC
11
XVDD 49
XL1
12 PHLPF/RFMON
CD
XIN 48
16.9344 MHz
C9
R28
13 VREF
XOUT 47
3.3/16
SERVO
220
14 EIN
XVSS 46
15 FIN
RVDD 45
16 TEC
RCHO 44
C11
17 TE
LRVSS 43
C46
0.056
ZD1
18 TEIN
LCHO 42
0.01
MA8033
19 LDD
41
20 LDS
LVDD +B
C21
10/25
FDO 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
C3
47/25
CNP1
TR+
TR+
+B
C4
0.001
C83
0.001
5V
11
C35
0.047
R39
680
R50
680
C22
10/25
C24
0.0015
(ML)
0.82µH
12
C
C36
0.22
R38
56K
R24
2.2K
13
F
R9
10
L1
14
B
TP
ONLY
FOR
FLAS
R19
1K
15
A
Q1
KTA1504 Y
R40
4.7K
VVDD
VVSS
PCKIST
PD02
PD01
MOT_A-/CONT4
MOT_A+/CONT5
MONI3/EMPH
MONI4
MONI5
MO_SPEED/CONT6
C2F/SBCK
DRF
*RES
*WRG
DO
DI
CL
CE
DVSS
16
VREF
E
C37
0.1
C38
0.01
GND
16
LD
15
14 VREF
PD
13
VCC
12
VR
11
33K
R6
E
10
A
9
B
8
33K
R3
F
7
C
6
GND
5
TR+
4
FO3
FO+
2
TR1
FFC1
VCC
B
R88
+B
C2
0.01
PICKUP UNIT(306)
C74
0.001
C26
+B
+B
R26
10K
3.3V
+B
C52
0.01
R55
6.8K
+B
R58
10K
C
33P
+B
G
M
M
NSW1
PICKUP-IN
6
6
6
-
5
5
5
+
4
4
4
3
3
3
2
2
2
1
1
1
-
IC2
LA6261
FOCUS/TRACKING/
SPIN/SLED DRIVER
6
5
4
3
2
1
Q2
KTA1271Y
SP+
SPSL+
SLPUIN
GND
2.2K
+B
+B
CNS3A/B
CNP3A
C41
100/10
+
5V
+B
+B
CNP3
R93
4.7K
R95
+B
+B
1 (1/4W)
+B
+B
+8V
+B
R94
1(1/4W)
+B
+B
H
• NOTES ON SCHEMATIC DIAGRAM can be found on page 5-1.
1
2
0.1
47/10
C58
10 11 12 13 14 15 16 17 18
CD MOTOR PWB-F
NM1
SPINDLE
MOTOR
NM2
SLED
MOTOR
C59
1 2 3 4 5 6 7 8 9
VIN1G
VIN2
VIN2G
VIN3
VIN3G
VIN4
VIN4G
PGND1
REGIN
PVCC1
REGOUT
VIN1
SVCC
SGND
VREFIN
VCONT6
REV6
FWD6
VCONT5
REV5
FWD5
VO5VO5+
VO6VO6+
PGND2
MUTE
PVCC2
VO4VO4+
VO3+
VO3VO2+
VO2VO1+
VO1-
C86
0.022
C29
0.001
27 26 25 24 23 22 21 20 19
36 35 34 33 32 31 30 29 28
F
100/10
C61
100/10
C56
R91
10K
2.2K
C
100
R85
R48
1K
D1
KDS184
R59
C62
0.01
C57
100/10
+B
C60
0.001
R57
10K
R92 10K
+B
E
R54
5.6K
3
4
Figure 6-1 SCHEMATIC DIAGRAM (1/10)
6–1
5
6
CD-MPS900/CD-MPS99
+B
+B
+B
+B
390
C47
0.01
+B
VDD
VSS
X1
X2
1K
R69
1K
R67
R66
R77
R64
R78
1K
1K
1K
1K
1K
1 2 3 4 5 6 7 8 9 10 11
CL R62
AVSS CE
+B
R65
2.2K
R63
2.2K
1K
5V
C85
0.022
Q5
2SD601 AR
R21
R22
4.7K
R20
4.7K
1
R86
4.7K
1
GND
TRAY SW2
TRAY SW1
CLAMP
DISC
PHOTO
+5V
TR+
TRCAM+
CAM-
+B
C70
0.01
R98
390
C69
47/25
IC3
LC78683E
MP3 DECODER
DVDD3
VSS
DVDD2
VSS
1
2
3
4
5 C2FIN
6 TEST1
7 CKIN(16M)
8 VSS
9 CKOUT
10 TEST2
11 DVDD1
12 PW
13 SBSY
14 SFSY
15 SBCK
16 AVDD1
17 VPRFR
2122
18 VCOC
19 VPDO
20 AVSS
60
59
58
57
56
55
54
53
VSS 52
DVDD4 51
50
49
48
47
46
45
44
43
42
41
+B
ADRS0
ADRS1
ADRS2
ADRS3
ADRS4
ADRS5
ADRS6
ADRS7
SW3 TRAY SW2
SW2 TRAY SW1
3
SW1 CLAMP
4
SW4 DISC
5
6
RX1
7
8
+
9
10
11
CNP6
11
11
M
M1
TRAY
MOTOR
M
M2
MAIN CAM
MOTOR
+
-
ADRS8
OEB
CASUB
CASLB
WEB
RASB
2V
0.01
C53
+B
MDATA8
MDATA9
MDATA10
MDATA11
MDATA12
MDATA13
MDATA14
MDATA15
C66
0.01
MDATA0
MDATA1
MDATA2
MDATA3
MDATA4
MDATA5
MDATA6
MDATA7
2.0V
CASLB
CASUB
OEB
ADRS8
ADRS7
ADRS6
ADRS5
ADRS4
MDATA15
MDATA14
MDATA13
MDATA12
C64
33P
(CH)
C75
0.001
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
C65
47/10
MDATA11
MDATA10
MDATA9
MDATA8
2.2K
R82
2.2K
C63
1/50
2.2K
R85
R81
3.3K
C44
100/10
R83
150
C29
0.001
R59
C42
33P(CH)
R80
82
DATACK
DATAIN
RESB
INTB
MP3 CE
MP3 CL
CMDIN
CMDOUT
OVF
CNTOK
WOK
VSS
DVDD6
CRCF
FSYNC
STDAT
STCK
STREQ
VSS
DVDD6
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
LRSY
ADDATA
ADBCK
ADLRCK
+B
C68
0.01
1
2
3
4
5
6
7
8
9
10
11
3.3V
TP TPTPTP
CNP6A
2
L3
2.2µH
R26
10K
1
1
5V
+B
5-CHANGER
MOTOR PWB-E
FFC4
+B
Q3
2SD601 AR
R84
4.7K
4.7K
R87
4.7K
R52
4.7K
0.82µH
R24
2.2K
L1
R89
4.7K
C24
0015
ML)
CNP5
C84
0.022
Q4
2SD601 AR
C22
10/25
R79
4.7K
C71
0.1
R61
2.2K
R60 1K
+B
7
0
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CNP704
0
R72
R73
2.2K
47K
390
390
390
390
390
390
390
CD RES
WRQ
DRF
DO
DI
CL
CE
DISC
CLAMP
TRAY SW1
TRAY SW2
PHOTO
GND
+5V
R74
1K
R97
7
6
5
4
3
2
1
RESET
R76 FSYNC
1K 33 32 31 30 29 28 27 26 25 24 23
R70
ICO 22
1K 34
35 MP3-RES
CDEMPH 21
36
20
37 VSS IC5
SYS-DI 19
38
SYS-DO 18
39 IXA006AW
VDD 17
MICRO- SYS-CL 16
40
41 COMPUTER SYS-CE 15
INTB 14
+B 42
43 AVDD
MP3 DI 13
44 AVREF
MP3 DO 12
FDO
FCLK
R71
2.2K
FFC704
16
R68
100K
P6-4 11-C
TO DISPLAY PWB
XL2
4.19 MHz
R75
220
C51
0.01
SUB_CE
C50
47/10
CNP4
RM1
10K
R10
4.7K
7
6
5
4
3
2
1
5V
R17
4.7K
RES
VPP
+5V
FCLK
FDO
FDI
GND
L2
2.2µH
ONLY
FOR
FLASH
DCASLB
DCASUB
DOEB
ADRS8
ADRS7
ADRS6
ADRS5
ADRS4
VSS
CNP2
IC6
SI3033LUS
VOLTAGE
+B
REGULATOR FJ1
0.1
C10
+B
ADRS0
ADRS1
ADRS2
ADRS3
VCC
VCC
VCC
IC4
L8316V35
D-RAM
DWEB
DRASB
VSS
47/10
C58
C59
0.1
VSS
44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
+B
3
C14
47/10
ADRS0
ADRS1
ADRS2
ADRS3
WEB
RASB
MDATA4
MDATA5
MDATA6
MDATA7
MDATA0
MDATA1
MDATA2
MDATA3
3.3V
1
2
C13
0.022
+B
+B
+B
+B
C76
+B
5V
+B 3.3
+B
C48
0.01
0.022
+B
+B
1
R-CH
2
AGND
3
4
5
L-CH
DGND
+5V(DIG.)
6
DGND_DRIVER
7 +8V
8 +5V(ANL)
CNS601
P6-5 1-A
FROM MAIN PWB
C39
0.1
+B
+B
+B
+B
• The number 1 to 12 are waveform number shown in page 5-2.
6
7
8
9
10
Figure 6-2 SCHEMATIC DIAGRAM (2/10)
6–2
11
12
CD-MPS900/CD-MPS99
DISPLAY PWB-A2
G
G08
G09
G12
G11
G10
P02
P01
P04
P03
P05
P07
P06
P08
P09
P12
P11
P10
P13
P15
P14
P17
P16
P18
P21
P20
P19
P23
P22
P24
P26
P25
P27
P29
P28
P30
NP
NP
F
R794
1.5
3
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12
C707
1/50
1
+10V
B
2
R745
10K
LED703
SDPB50CD
R751
330
A
F
FL701
FL DISPLAY
LED DRIVER
Q710
KRC102 S
G3
-2
78 S10
77 S11
R750
47K
G4
G5
G6
G7
G8
G9
G10
G11
G12
S1
S2
S3
S4
S9
79 VLOAD
S5
S6
S7
S8
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98
80
T_RE
76 S12
CD_R
C
75 S13
74 S14
C
73 S15
IL
72 (DIST 3),S16
71 (DIST 2),S17
70 (DIST 1),S18
69 (DIST 0),S19
68 S20
67 S21
66 S22
65 S23
C
IC701
IXA008AW
SYSTEM
MICROCOMPUTER
64 S24
63 S25
62 S26
61 S27
60 S28
59 MIC SW/S29
D
C
58 ILLU LED/S30
57 DIST
56 CLAMP SW
100
55 DISC_SW
1K
54 TRAY SW1
1K
53 TRAY SW2
4
3
2
1
1
FFC701
AVREF
AVDD
PHOTO
P_IN
SP DET
REMOCON
VSS
R720
1K KEY 0
1K
1K
1K
1K
R724
R733
R736
R721
560
1K
R729
R725
+B
D716
DS1SS133
+B
R771
4.7K
A+10V
M_+13V
SW_5V
+B
+B
R593
10K
T_BIAS
SP_DET
SP_RLY
-20dB
Q714~Q717: SOLENOID DRIVER
3
CNP701A
1
Q717
KRA107 S
1
3
TAPE MECHANISM
PWB-D
TAPE
MOTOR
+
M
-
1
FFC702
7
1
SOL
SOL
7
CNP702A
T2 RUN
4
5
6
+MTR
6
SOL2
5
SOL1
4
F_REC
3
T1 RUN
2
7
1
2
3
7
1
3
2
2
1
Q715
KRA107 S
3
1
Q716
2 KRC104 S
G
2
Q714
KRC104 S
Q711
KRA107 S
2
3
1
Q706
KTA1273 Y
Q707
KTA1273 Y
R787
4.7K
Q708
KTA1273 Y
LED701
304VT2H3
2
Q712
1 KRC104 S
R790
8.2K
R786
4.7K
GND
D710
DS1SS133
R761
10K
3
R777
10K
R767
10K
R778
10K
R766
10K
R779
10K
Q706, Q711, Q712: MOTOR DRIVER
Q707, Q708: SOLENOID DRIVER
• NOTES ON SCHEMATIC DIAGRAM can be found on page 5-1.
2
3
4
Figure 6-3 SCHEMATIC DIAGRAM (3/10)
6–3
5
R768
10K
JOG701
VOLUME
D709
DS1SS133
H
1
S MUTE
TIMER LED
T_SOL_B
680
2.2K
REC/PLAY
C710
0.047
5
T_T1/T2
R785
2.7K
6
+B
S_MUTE
R780
10K
7
+B_PROTECT
D_GND
R775
4.7K
8
DI
R776
4.7K
9
CLK
M_+13V
F
11
10
CNP701B
P6-6 11-G
TO MAIN PWB
12
VO
DO
C709
0.047
13
T
PR
CE
R770
5.6K
15
14
R726
R727
R731
10K
E
16
TUN_SM
50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
R762 R784
1K
10K
16
T_MOTOR
R732
1K
T_SOL_A
51
VDD
52
T_RUN
SP_RLY
R730
680
R746
R788
10K
R728
R740
R789
10K
AC_RLY
1K
R741
6
CD-MPS900/CD-MPS99
F
F1
NX
NX
G01
G03
G02
G03
G05
G04
G06
G07
G08
G09
G10
G12
G11
P02
P01
P04
P03
P05
Y
22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
R795
1.5
C702
220/10
C701
1/50
+B
2
3
4
5
6
7
8
R763
1K
R701
1K
R702
1K
R703
1K
R704
R705
1K
1K
R706B
R707
1K
ILLU LED 9
1K
R708
RESET 10
XOUT 11
XL701
XIN 12
VPP/IC 13 4.19 MHz
1K
C704
15P(CH)
C705
18P(CH)
CD_DRF 15
1K
1K
AVREF
AVDD
PHOTO
P_IN
3
+B
CLK 17
R710
DI 18
R711
DO 19
R712
CE 20
R713
CD_CE 21
R714
CD_CLK 22
R715
CD_DI 23
R716
CD_DO 24
AVSS 25
T_RUN PULS 26
TUN_SM(SPAN) 27
SP DET
REMOCON
VSS
T_SOL_B
S MUTE
TIMER LED
R769
R709
VDD 16
T_FP SW 28
PROTECT 29
VOL_JOG 30
1
1K
2
1K
CNP704
16
FFC704
1K
1K
1K
1K
R717
1K
R739
1K
R573
10K
C723
0.047
R759
5.6K
C720
0.022
+B
+B
WTM705 1
VF2
FW705
1
-VF
P_IN
R722
1K
R723
1K
KEY 1
KEY 2
R718
1K
R719
1K
R720
1K KEY 0
1K
1K
1K
R724
1K
560
1K
R733
R736
R721
680
R725
R729
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1K
43 42 41 40 39 38 37 36 35 34 33 32 31
R727
Q713
KRC104 S
14
IC701
IXA008AW
SYSTEM
CROCOMPUTER
1
CD_RESOUT
CD_WRQ
CD_DRF
CD DO
CD DI
CD CLK
CD CE
DISC SW
CLAMP SW
TRAY SW1
TRAY SW2
PHOTO
GND
+5V
+B
SUB_CE
CNP5
P6-2 11-C
TO CD SERVO PWB
1
CNP802
P6-7 6-G
TO POWER PWB
VDD
-20dBATT
T_BIAS
T_REC/PLAY
T_T1/T2
CD_RESOUT
CD_WRQ
SUB CE
C721
0.022
G1
G2
G3
G4
G5
G6
G7
G8
G9
G10
S1
G11
G12
88 89 90 91 92 93 94 95 96 97 98 99 100
VF1
+B UNSW5.6
AC RELAY
CTR
6
6
L701
5V BACK UP
+B
D713
DS1SS133
100 µH
C715
0.01
+B
1
R761
10K
RD23
680
KEY 2
LED701
304VT2H3
R768
10K
RD24
820
SW725 SW726
KEY 1
R767
10K
PLAY/
REPEAT
STOP
RD11
RD12
680
820
SW712 SW713
TUNER
(BAND)
RD01
680
KEY 0
R766
10K
CD
RD02
820
RD25
1K
RD26
1.5K
SW727 SW728
RD27
2.2K
SW729
RD28
2.7K
1.5K
SW714 SW715
TAPE
RD03
1K
RD32
15K
DISC 5 DISC 3
DISC 1
RD19
RD20
RD21
5.6K
10K
15K
33K
SW716
SW717
SW718
SW705
C717
47/25
RD18
3.9K
RD06
2.7K
RD31
10K
1 2 3
RD17
2.7K
LEFT
R783
100
SW732 SW733 SW734 SW735
DISC 2 DISC 4
2.2K
GAME/ X-BASS/
VIDEO DEMO
RD04
RD05
2.2K
1.5K
SW701 SW702 SW703 SW704
RD30
5.6K
SW730 SW731
REC/ MEMORY/ OPEN/ DIRECT
PAUSE SET
CLOSE PLAY
RD15
RD16
RD13
RD14
1K
RD29
3.9K
+B
RX701
PIC3704
D715
DS1SS133
R771
4.7K
R593
10K
RESET
Q709
R781
47K KRC102 S
2
3
D714
DS1SS133
C714
3.3/50
+B
R782
100K
R773
10K
D711
DS1SS133
D712
DS1SS133
R791
10K
UP
SW720 SW721 SW722 SW723
SW719
RIGHT ENTER DOWN
CHARACTER
MP3
NAVIGATION
SW706 SW707
POWER CLOCK/ TUNING TUNING FAST
EQUALIZER FAST
DOWN REWIND/
ON/STAND-BY TIMER UP
FORWARD/
PRESET
PRESET UP
DOWN
6
7
8
9
10
Figure 6-4 SCHEMATIC DIAGRAM (4/10)
6–4
11
12
CD-MPS900/CD-MPS99
FM SIGNAL
A
BI601
C652
CD SIGNAL
VIDEO SIGNAL
AUX SIGNAL
IC601
C653
LC75341
220P
AUDIO PROCESSOR
CNS601
R618
330
CD_D_GND
16
Q909
KTC3875 GR
R615
4.7K
8.2K
7
8
1/50
C619
1/50
C621
1/50
9
10
11
+
Ð
ROUT
LOUT
LBASS
RBASS
LTRE
RTRE
RIN
LIN
RSEL0
LSEL0
12
L4
+B
R4
AUX
C603
220/10
C608
0.082
21
20
DECK
L2
TUNER
R2
L1
CD
R1
R
3
C
0.0
C614
1/50
C616
4.7/50
C618
1/50
C620
1/50
C622
1/50
18
17
16
R3
L3
C6
1/5
C606
0.1
19
15
14
13
C624
1/50
C623
1/50
CD_A_GND
17
6
1/50
C615
4.7/50
C617
C631
0.01
R614
4.7K
R-CH
15
Q908
KTC3875 GR
A_GND
6
R616
2.2K
R985
R619
330
5
C605
0.1
C611
0.0022
C613
R987
2.2K
Q602
KTC3875 GR
14
R607
3.9K
R988
2.2K
R610
2.2K
R612
390
L-CH
4
C607
0.082
+B
CD_GND
13
R611
2.2K
CCB
INTERFACE
3 VSS
+
Ð
2.7K
R608
C626
0.0022
R609
2.7K
C625
0.0022
22K
R621
C639
1/50
C640
22/50
26
22K
AGC
R620
P6-7 1-F
TO
POWER SECTION
12
+B
Q604
KTC3875 GR
D+5V
CLK 24
+
Ð
11
R617
2.2K
R613
R986
390
8.2K
Q601
KTC3875 GR
C6
0.0
C601
220/16
VDD 23
VREF
22
+
Ð
LD+7V
+B
A_5V
10
C
Q603
KTC3875 GR
B
1 DI
CE
2
R605 C609
1/50
10K
Q603, Q604: SYSTEM MUTE
+
Ð
+B
1K
+
Ð
+B
1K
R602
+
Ð
+B
R601
C651
220P
RECORD SIGNAL
3
L-CH
3
4
CD_GND
4
5
A+5V
6
5
D_GND
6
7
+8V
8
7
D+5V
8
9
220P
P6-2 11-F
TO CD SERVO PWB
CNP2
2
PLAYBACK SIGNAL
1
A_GND
+
Ð
1
R-CH
D
8.6V
R148
4.7K
2
3
0V
1
REC_R
1
3.4V
0V
Q112
KTA1504 GR
SWITCHING
2
3
R138
10K
Q114
KRC104 S
SWITCHING
0V
R105
3.3K
0.7V
R103
2.2K
KTC3200 GR
SWITCHING
0V
R119
3.9K
5
R111
6
IC101
AN7345K
56K
+
Ð
9
15K
H
• NOTES ON SCHEMATIC DIAGRAM can be found on page 5-1.
1
2
3
4
Figure 6-5 SCHEMATIC DIAGRAM (5/10)
6–5
5
C135
0.022
C134
220/10
C133
22/25
C124
270P
R130
1.5K R132
C128
0.022
100
C130
0.0033
C132
47/25
R134
10K
8
7
10 11 12
C125
22/50
R123
6.8K
C115
560P
R115
56
0V Q101
C150
47/50
R126
4.7K
R150
68K
C120
0.0022
R122
27K
4
15 14 13
C131
47/25
IC101
PLAYBACK
AND
R117
RECORD/ 100K
PLAYBACK C113
0.039
C111
AMP. 47/25
Hich=CHROME
R133
100
3
C109
330P
R113
1K
0V
0V
2
+B
16
Ð
+
56K
C129
0.0033
0.7V
1
L
C107 330P
17
0.022
0V
SWITCHING
Q103
KTC3200 GR
Ð
+
112K
Hich=T1
112K
+
Ð
C126
22/50
18
C127
0V
19
C123
270P
C103
180P
20
R127
CNP102
21
0.022
R110
7
22
3.3/50
6
R128
5.6K
C110
330P
23
C121
5
T2_L1
T2_L2
0V
R C108
330P
24
R124
6.8K
C143
4.7K
T2_R1
0.7V
Q104
KTC3200 GR
SWITCHING
4.7K
Q106
KTC3875 GR
0V
T2_R2 3
A_GND 4
0V
R106
3.3K
Q105
KTC3875 GR
SWITCHING
TAPE 2
RECORD/
PLAYBACK HEAD
C104
180P(CH)
M_GND 1
ERASE 2
R109
4.7K
1
2
3
3
5
6
7
R107
47K
R-CH
ERASE HEAD
0V
C106
0.0015
0.7V
R114
1K
SWITCHING
R104
2.2K
R120
3.9K
R131 1.5K
1K
27K
SWITCHING
Q102
KTC3200 GR
C105
0.0015
C101
560P
R129
5.6K
R101
CNP101
C116
560P
C114
0.039
R118
100K
R121
3
0V
L-CH
C112
47/25
47K
T1_L
R108
3
0V
G
R116
56
1K
1
C118
47/25
C102
560P
T1_R
C117
47/25
R-CH
R112
15K
R102
2 A_GND 2
L-CH
F
1
0.7V
Q107
KTC3875 GR
MUTING
Q108
KTC3875 GR
MUTING
R
L
TAPE 1
PLAYBACK HEAD
R139
10K
0.7V
C119
0.0022
9.3V
ALC
Nor/CrO2
RIPPLE
ALC
Vcc
E
3.4V
0V
6
R135
10K
9.3V
SWITCHING
Q113
KRC104 S
R137
R147
10K
R136
220K
R146
10K
C141
100/16
R149
150
CD-MPS900/CD-MPS99
P6-8 11-B
TO POWER PWB
CNP901
MAIN PWB-A1 (1/3)
1
JK692
HEADPHONES
GAME INPUT
PWB-B2
FW901
M_+13V
SP_RLY
R-CH
GND
L-CH
5
WTM901
JK690
C696
0.01
C695
0.001
JK691
VIDEO OUT
GAME
INPUT
CNS603
C602
0.022
C601
220/16
+B
C603
20/10
C608
0.082
D690
C610
1/50 R604
R606
3.9K
DS1SS133
D691
DS1SS133
C693
390
1
2
2
3
4
3
4
3
4
5
5
5
33K
R691
6.8K
R690
6.8K
C691
390P
C690
390P
L-CH
AUX/VIDEO
R692
33K
R-CH
6
CNP602
R603
1K
VIDEO IN
1
1
BI603
C694
0.001
10K
CHASSIS
C612
0.0022
CE
A+10V
+B
DGND
DI
R642
5.6K
CLK
R644
6.8K
TUN_R
AGND
1
5
7
2
3
8
6
R643
6.8K
TUN_L
R641
5.6K
9
4
2.7K
DO
P6-10 10-H
TO TUNER SECTION
C614
1/50
C616
4.7/50
C618
1/50
C620
1/50
C622
1/50
139
0K
R137
220K
+B
REC_L
C_R
R136
220K
+B
0.7V
10K
Q107
0V
KTC3875 GR
MUTING
FFC701
16
C134
220/10
CE
DO
DI
+B
D_GND
11
S_MUTE
11.6V
R141 2
0V
1
Q109 4.7K
KTA1504 GR
SWITCHING
10
3
T_T1/T2
0V
7
A+10V
+B
0V
0V
5
SW_5V
+B
4
SP_DET
18
19
20 5
7
3
SP_RLY
2
21 22 23
SP_RLY
SP_DET
SW_5V
-20dB
M_+13
+B_PROTECT
D_GND
A+10V
TAPE_A_GND
M_GND
R145
4.7
L103
330 µH
C140
47/25
C138
0.0082
6
M_+13V
0V
C139
0.039(ML)
8
T_BIAS
Q111
KTC3203 Y
BIAS OSC
R143
47K
C137 R144
0.047(ML) 22K
9
REC/PLAY
+B
10K
13
12
BIAS
Q110
KRC104S
R142
82(1/2W)
0 11 12
11.6V
Nor/CrO2
RIPPLE
ALC
Vcc
5 14 13
R140
47K
+B
14
+B_PROTECT
CNP701A
R158
220
15
P6-3 1-F
TO DISPLAY PWB
C135
0.022
C133
22/25
CLK
16
1
CNP701B
1
24 25
TO POWER SECTION
7
8
9
10
Figure 6-6 SCHEMATIC DIAGRAM (6/10)
6–6
11
12
CD-MPS900/CD-MPS99
2
1.5K
Q901
KTC3875 GR
C915
100/100
R921
2.2K
R958
100
Fusible
(1/4W)
C919
0.01
R925
1.5K
(1/2W)
R927
39K
R922
0.1
(5W)
-B
R934
56K
L901
3 µH
C923
3900/85
C920
3900/85
R930
47K
R929
47K
SP_DET
D885
DS1SS133
C946
0.1/50
C901
2.2/50
R928
39K
C922
C921
4700/50 4700/50
-B
R908
1K
C902
2.2/50
R926
1.5K
(1/2W)
D905
DS1SS133
-B
C
ZD903
DZ12BSB
R935
56K
D906
DS1SS133
C916
100/50
R919
R920
1.5K
ZD902
DZ12BSB
R937
56K
R918
2.2K
R917
0.1(5W)
C917
0.01
L902
3 µH
Q903
KTC3875 GR
-B
Q902
KTC3875 GR
R901 R902
56K 56K
+B
+B
-B
R910
1K
C911
100/100
1
+B
C925
3
+B
C914
100/100
C912
100/100
4
47/50
5
VH+
6
VL+
7
8
D907
DS1SS133
Q904
KTC3875 GR
9
IC901
STK41244
POWER AMP.
C918
100/50
10
R916
0.22(5W)
11
R913
0.22(5W)
12
(1/4W)
13
R912
100
Fusible
C913
100P(CH)
R904
1K
14
R911
56K
C907
100P(CH)
R907
56K
C908
3P(CH)
C909
0.1
(ML)
560
C905
47/50
C906
R906 47/50
R905
560
15
-B
C904
0.001
C903
0.001
B
16
R909 C910
33K 3P(CH)
17
VL-
+
-
18
R903
1K
VH-
-
GND
+
A
VH-
D910
1N4004S
D909
1N4004S
VL-
VL+
VH+
+B
R863
3.3
(1/2W)
A_GND
10V
6
SW
5
C855
10/50
SP_RLY
C859
22/50
25
26
AGC
+B
R885
680
-B
GND
4
C856
0.1
(ML)
SP_DET
+B
-B
R886
22K
+B
3
13V
2
5V
1
R-CH
24
+B
R888
47K
R887
22K
IC851
8V
7
6
R889
47K
ZD805
DZ12BSB
14
15
IC851
AN80T53
MULTI
REGULATOR
Q886
KTC3875GR
L_CH
D
Q885
KTC3875 GR
C885
0.1
+B
-B
-B
C854
220/25 C865
R854
22/25
3.3K
BI801 CH
+B
C864
22/25
1
+B
+B
R853
22K
E
3
4
+B
R864
22K
5
6
-B
5
P6-5 1-C
P6-6 8-H
TO MAIN SECTION
21
-B
+B
LD+8V
A+10V
+B
R857
22K
8
9
C850
4700/25
10
11
+B
+B_PROTECT
R859
10K
12
11
23
D+5V
A_5V
+B
D863
DS1SS133
SW_5V
+B
P6-4 11-E
FROM DISPLAY PWB
FW705
F
7
+B
D862
DS1SS133
10
M_+13V
D860
DS1SS133
D861
DS1SS133
22
G
20
18
7
16
AGND(AUDIO PRO)
M_GND
D_GND
CHASSIS
CD_D_GND
CD_A_GND
17
19
TAPE_A_GND
H
• NOTES ON SCHEMATIC DIAGRAM can be found on page 5-1.
1
2
3
4
Figure 6-7 SCHEMATIC DIAGRAM (7/10)
6–7
5
6
CD-MPS900/CD-MPS99
MAIN PWB-A1 (3/3)
FM SIGNAL
D912
DS1SS133
R
820(2W)
820(2W)
R944
1.5K
R934
56K
L
R938
10
(1/2W)
R957
4.7K
L921
0.29 µH
Q905
KTC3199 GR
+
-
M
M901
FAN
MOTOR
Q907
KTC3203Y
1
2
3
4
5
CNP901
R946
R956
1K
47K
L920
0.29 µH
D913
DS1SS133
R940
R941
10
(1/2W)
R939
10
(1/2W)
L901
3 µH
SP RELAY
ON-OFF
10
(1/2W)
56K
R935
56K
L
1
R959
220
M_+13V
SP_RLY
R-CH
GND
L-CH
+B
D911
DS1SS133
C928
0.1
(ML)
2
1
CNS971
R951
1K
RL914
C929
0.1
(ML)
2
L1_OUT
R1_OUT
R
Q906
KTC3203 Y
R950
68K
C931
10/50
R947
15K
R945
1.5K
R942
L R943
R
R949
1K
FW901
6-6 10-A
TO GAME INPUT PWB
L902
3 µH
CNP971
FAN MOTOR
+B
DRIVER
+B
D914
DS1SS133
C952
0.01
SP_L1-CH
R983
33K
SP_R1-CH
6 OHMS MIN
R984
1.5K
+B
C944
47/25
SP_L1-CH_GND
SP_R1-CH_GND
+B
SO902
SPEAKER
TERMINAL
-B
POWER PWB-B1
C810
0.22
+B
F802
5A/125V
BI801 CHASSIS CNP801
4
5
5
5
6
6
6
7
7
7
9
10
-B
F804
2A/125V
D804
1N4004S
CNS801
D803
1N4004S
C807
0.1 (ML)
R804
47
DZ30BSB
ZD803
R806 C803
47K 47/50
C802
47/50
C801
100/35
R803
12K
R801
100K
VF2
-VF
P_IN
F803
2A/125V
D806
1N4004S
RL841
T.F.
R891
100
PT801
MAIN POWER TRANSFORMER
Q801
ZD801 KTA1274 Y
DZ6.2BSA
VOLTAGE
REGULATOR
VF1
R890
4.7M
AC_RLY
+B
C861
0.022
UNSW_ 5.6V
+B
IC854
AN78L05
3
1
2
D853
1N4004S
+B
VOLTAGE
REGULATOR
R842
1K
R843
47K
D842
D845 1N4004S
1N4004S
D844
D843
1N4004S 1N4004S
C842
470/35
C843
0.047(ML)
SSIS
C841
Q841
KTC3199 GR 1000/6.3
R841
220K
R858
220
CNP802
FROM DISPLAY PWB
FW705
-B
R802 ZD802
47K DZ7.5BSB
1
2
3
4
5
6
F801
5A/125V
C806
0.1
(ML)
VH-
R844
82
9
10
11
VL-
8
8
9
10
C808
0.1
(ML)
D802
D10XB60F
R805
47
8
+B
GND
F805
6A/125V
3
4
C844
0.0047/250
3
4
D846
DS1SS133
3
VH+
VL+
C805
22/100
2
C804 D805
220/63
1N4004S
1
2
R808
2.2K
(1/2W)
1
C809
0.1
(ML)
D856
1SS133
1
AC POWER SUPPLY CORD
AC 120 V, 60 Hz
C811
0.22
D801
D10XB60F
PT841
SUB POWER
TRANSFORMER
RELAY
DRIVER
7
8
9
10
Figure 6-8 SCHEMATIC DIAGRAM (8/10)
6–8
11
12
CD-MPS900/CD-MPS99
A
C302
0.001
AM ANTENNA
T303
10K
C362
3 3/50
VD301
SVC347S
C335
560P
T306
R365
D301
DS1SS133
D302
DS1SS133
C342
0.022
C332
0.022
0.001
C338
B
C331
0.047
15P
(CH)
C330
C323
0.022
10K
R323
68K
C334
22P
(CH)
AM OSC.
R336
R358
3.9K
R351
5.6K
TP301
3
0.022
C350
0.022
10/50
C397
0.022
+B
R382
150
R316
4.7K
C318
100P
C393 R
1/50 1
C381
12P(CH)
Q302
KTC3194 Y
OSC BUFF
1
4
IC3
LC72
3
C376
100P(CH)
C383
47P
R375
R374
1K
2
1K
C382
15P (CH)
F
DI
X352
4.5 MHz
22 21 20
R373
R322
680
2
C389
0.001
+B
C394
47/25
1
C312
0.022
R381
10K
T302
R309
10K
X INX OUT
VSS
AOUT
CE
T301
FM OSC.
C351
VD303
SVC230C
C352
C324
C311
18P(CH) 4.7P(CH)
R325
47K
2
C307
10/50
FM IF
C317
C315
0.01
E
C316
0.022
R314
22
1
C306
0.022
9
CF303
VD302
SVC230C
C308
4.7P
(CH)
R311
100K
L312
FM RF
D305
DS1SS133
SO302
FM ANTENNA
TERMINAL
C309
0.001
GND
8
7
C305
4.7P
(CH)
FM 75 OHMS
D
6
5
C313
22P
(CH)
C304
0.01
4
C347
0.022
3
R302
10
2
2
15P(CH)
2
1
C310
1
C320
0.001
1
C303
10P(CH)
CNP301
1 2 3
AM OSC IN
AM MIX OUT
IC301
TA7358AP
FM FRONT END
R313
33K
AM LOOP
ANTENNA
0.001
C
23
FM IF IN
AM OSC OUT
24
BF301
B.P.F
C377
100P(CH)
C378
470
G
+B
MAIN PWB-A1 (2/3)
H
• NOTES ON SCHEMATIC DIAGRAM can be found on page 5-1.
1
2
3
4
Figure 6-9 SCHEMATIC DIAGRAM (9/10)
6–9
5
6
7
+B
8
R388
3.9K
C398
100/10
L352
100 µH
C396
100/10
C395
0.022
R360
4.7K
1
2
3
9
6 – 10
4
5
6
7
TUN_L
R376
1K
C370
1/50
C355
22P(CH)
10.7 MHz
R353
270
IF OUT
PHASE
L-CH OUT
PHASE
MO/ST
(FM/AM)
R-CH OUT
VCC
MPX IN
FM DET
MPX VCO
STEREO
C365
0.022
C363
0.022
27P(CH)
C369
C361
0.022
10K
R365
R357
470K
C373
0.015
0.015
C374
R356
1K
C366
0.001
C364
2.2/50
C362
3.3/50
C368
1/50
X351
456 kHz
IC303
LA1832S
FM IF DET./FM MPX./AM IF
C357 R355
2.2/50 3.3K
C356
0.001
DGND
10 11
R395
47K
C358 12
1/50
TUN_R
9
C386
330P
10 11
C391
47/25
R393
1K
C399
0.022
3
15 14 13
AGND
19 18 17 16 15 14 13 12
CF351
2
9
R384
5.6K
L351
100 µH
8
5.6K
R387
C389
0.001
7
16
A+10V
8
6
17
C372
1/50
DO
7
SD
VSM
AM IF IN
AM LOW CUT
FM/AM OUT
GND
20 19 18
R359
1.8K
C380
10/50
5
0.022
R352
1K
PLL (TUNER)
T351
C354
1
C353
0.022
4
R377
47K
CF352
AM IF
R350
2.7K
C367
1/50
CLK
6
C385
0.01
AM RF IN
3
MO/ST SD
IF IN
ST IND
C392
0.001
C387
0.022
FM AFC
2
2.2K
AM OSC IN
AM MIX OUT
1
REG
21
FM/AM
VDD
IF FM IN
CONT
AM IN
FM/AM
22 21 20
R379
C393 R380
1/50 1.5K
TP
DI
DO
5
AIN
PD
CL
0.022
C350
22
FM IF IN
AM OSC OUT
5.6K
23
CE
1K
1K
DI
4
3
R378
1K
C394
47/25
10/50
C352
24
R372
R373
1K
R381
10K
358
.9K
R386
22K
C379
100P
(CH)
83
P
R374
X INX OUT
VSS
AOUT
CE
IC302
LC72131
1
2
C377
100P(CH)
C378
100P(CH)
C376
100P(CH)
CD-MPS900/CD-MPS99
FM SIGNAL
AM SIGNAL
TP302
C371
1/50
ZD351
DZ5.1BSB
R392
SWITCHING R391
Q360 270
KTA1266 GR
+B
+B
270
R383
5.6K
R385
5.6K
C388
0.001
C384
0.001
+B
+B
8
10
Figure 6-10 SCHEMATIC DIAGRAM (10/10)
9
P6-6 11-C
TO MAIN SECTION
11
12
CD-MPS900/CD-MPS99
[2] Wiring side of PWB
A
DISPLAY PWB-A2
B
R741
R740
R730
R746
RX701
R762
R729
SW707
FAST FORWARD/
PRESET UP
C702
3 2 1
R731
R732
R784
35 25
20
50
45 40
51
55
15
IC701
65
D710
D709
10
SW714
TAPE
5
90 95
1
100
70
75 85
80
R750
SW701
POWER
ON/STAND-BY
C710
R721
R736
R733
31 30
60
E
C720
SW713
CD
R722
R788
R717
R759
C717
R789
D
Q707
RD12
RD11
R593
R761
Q706 B C E
R720 R719
R718
R768
R773
SW702
CLOCK/TIMER
R727
R723
D716
R739
SW712
TUNER
(BAND)
RD01
R779
R777
R766
RD02
Q717
B C E Q708
Q712
Q716
R726
R725
R767
SW703
TUNING
UP
E
C
B
Q714 Q715
R778
JOG701
VOLUME
C709
R776
R728
RD03
C
R785
R775
SW705
FAST REWIND/
PRESET DOWN
R771
RD05
RD06
RD04
R780
SW706
EQUALIZER
R724
SW704
TUNING
DOWN
81
LED701
FL701
51 50
CNP701A
47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 1
16 14 12 10 8 6 4 2
15 13 11 9 7 5 3 1
F
1
16
FFC701
CNP701B
P-14 9-B
TO MAIN PWB
G
H
1
2
3
4
Figure 6-11 WIRING SIDE OF PWB (1/8)
6 – 11
5
6
CD-MPS900/CD-MPS99
P6-17 5-A
TO POWER PWB
CNP802
TO TAPE MECHANISM PWB
P6-18 9-A
6
1
FW705
FFC702
1
SW716
X-BASS/
DEMO
D713
Q713
Q709
C715
D714
D711
D712
R782
D715
L701
RD23
SW728
MEMORY/
SET
C723
R791
R573
R707
1
3
5
7
9
11
13
15
16
Q710
RD26
SW729
OPEN/
CLOSE
C701
5 4 3 2 1
RD27
C707
SW730
DIRECT PLAY
R795
3 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8
R794
01
CNP5
P6-16 9-H
TO CD SERVO PWB
2
4
6
8
10
12
14
16
R713
R706B
R703
R701
FFC704
1
CNP704
R705
R704
R708
R769
R716
R702
95
XL701
C714
SW725
PLAY/
REPEAT
SW719
CHARACTER
R763
1
100
R783
R751
C704
5
SW718
R715
UP
R714
C705 C721
R712
R711
R709
R710
SW714
TAPE
0
RD25
RD19
RD18
RD20
RD17
RD16
RD21
R745
C720
SW717
LEFT
SW720
RIGHT
RD13
SW723
MP3
NAVIGATION
SW721
ENTER
SW722
DOWN
RD14
RD15
LED703
Q711
Q712
R717
R739
SW715
GAME/
VIDEO
SW727
REC/
PAUSE
1
WTM705
RD24
SW726
STOP
CNP702A
R790
R786
R770
Q708
779
6
R787
C710
1 3 5 7
2 4 6
R781
D710
D709
E
7
SW735
DISC1
RD28
SW731
DISC2
SW734
DISC3
RD32
RD29
SW732
DISC4
RD31
RD30
COLOR TABLE
BR
BROWN
RD(R)
RED
OR
ORANGE
YL
YELLOW
GR
GREEN
BL
BLUE
VL
VIOLET
GY
GRAY
W H (W )
WHITE
BK
BLACK
PK
PINK
SW733
DISC5
7
8
9
10
Figure 6-12 WIRING SIDE OF PWB (2/8)
6 – 12
11
12
CD-MPS900/CD-MPS99
MAIN PWB-A1
X352
C396
C383
C395
C374
C371
C618
C620
R644
C622
R642
C639
R621
C905
R905
R901
C903
R903
LG4
C907
C908
R907
R908
C906
C902
C640
R906
C904 R902
R904
C913
R
C617
C6
C
C623
R620
R958
R853
R912
R86
R945
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
ZD902
R918
R916
R917
R913
R911
C910
R922
R921
Q901
D911
D906
D905
C911
C912
R910
C917
R919
C920
Q902
C919
R941
R939
LG2
H
2
C615
C611
C613
IC901
R935
RL914
1
C605
R616
R617
R909
1
2
3
4
5
6
7
8
9
10
11
12
C946
R614
C909
R611
C602
24
23
22
21
20
19
18
17
16
15
14
13
C619
C612
R641
C624
R643
C626
C625
R609
R608
TP302
R613
R615
C609
R607
C607
IC601
C358
R355
C355
C357
R357
Q601
R986
Q602
X351
C368
R356
R920
C929
C616
Q603 Q604
C342
C363
C364
R985
R987
C901
C373
R618
R351
R365
C361
R358
C367
C653
C651
C652
C601
C606
R606
C614
C372
R309
R393
T301
VD303
R383
C398
R392
C385
C324
R380
C389
C318
D305
C309
Q908
Q903
D907
R934
C603
C608
C399
C369
R612
R610
C610
C923
R-CH
G
C366
24 23 22 21 20 19 18 17 16 15 14 13
D913
R943
L920
L-CH
C928
L921
R940
R938
F
R937
B C E
R947
SO902
SPEAKER
TERMINAL
R984
R983
Q904
C931
R949
R950
Q905
D912
R944
Q906
Q907 R959 R956
R946
P6-17 4-G
FROM
GAME INPUT PWB
R323
B C E C925
R353
C353
IC303
R601
R603
R602
R604
C370
1 2 3 4 5 6 7 8 9 10 11 12
L902
R957
E C B
CNS603
R988
R951
C944
C354
R352
R619
C388
L901
JK691
VIDEO OUT
E
VD301
2
CNP971 1
5
4
3
2
1
T306
Q909
D691
C335
L352
CF351
R350
C332
R395
ZD351
C356
R942
C693
C331
C330
CNP602
BR
2
RD
1
CNS971
CF303
C334
R336
D690
C352
C350
C316
R313
C323
C338
M901
FAN MOTOR
R322
R325
C317
R316
2
D302
R382
CF352
3
2
1
C351 T351
1 2 3
C362 VD302
1 2 3
B
C
E
R375
R311
D301 T303
D
C310 C313
T302
C303
BF301
CNP301
C311
C312
D914
1
Q302
L312
C308
AM LOOP
ANTENNA
1
2
C320
C307
IC301
R377
B C E
R302
R314
C306
C304
GND
9
8
7
6
5
4
3
2
1
L351
C393
C315
C
C305
C347
FM 75 OHMS
C387
C392
C380
C394
C397
R381
R385 R376 R388
IC302
R379
22 21 20 19 18 17 16 15 14 13 12
R391
1 2 3 4 5 6 7 8 9 10 11
TP301
S0302
FM ANTENNA
TERMINAL
C386
R387
R384
R359
Q360 R360
C391 R386
C382
C381
B
C377
R372 C378 R378
C365
C302
C376 C379
R374
R373
C384
A
3
4
Figure 6-13 WIRING SIDE OF PWB (3/8)
6 – 13
5
6
ZD903
R926
R925
R927
CD-MPS900/CD-MPS99
C631
R126
C124
R149
C137
Q111
R144
E C B
E C B
C103
R111
E C B
C104
R114
Q106
E C B
R145
C141 C138
E C B
C139
R143
C140
L103
R146
R147
9
C621
R141
R140
Q112
Q110
R142
Q109
C623
YELLOW
GREEN
BL
BLUE
VL
VIOLET
GY
GRAY
WH(W)
WHITE
BK
BLACK
PK
PINK
R859
D860
D862
D861
RD
WH
BK
WH
BK
WH
BK
WH
C865
C859
R864
C864
C856
C855
C850
R887
R888
R930
R885 R886
D909
D910
1
C952
1
2
3
4
5
LG1
7
8
9
CNP901
C922
BI801
R928
R929
C921
11
D863
Q886 C885
R863
C918
Q885
R854
R889
ZD805
C854
7 5 3 1
C916
903
926
925
927
6 4 2
D885
C914
C915
IC851
1
2
3
4
5
6
7
8
CNS601
CNP2
P6-16 11-E
TO CD SERVO PWB
R857
LG3
R853
YL
GR
BL
10
WH
9
BL
8
WH
7
BL
6
WH
5
BL
4
WH
3
BL
2
RD
1
CNS801
FW901
P6-17 4-H
FROM
GAME INPUT PWB
10
Figure 6-14 WIRING SIDE OF PWB (4/8)
6 – 14
CNP801
P6-17 4-A
TO POWER PWB
3
5
9
Q105
Q113
C112
R118
7
6
5
4
3
2
1
C132
R134
R105
Q103
R103
Q101
R104
Q102
R112
Q104
R106
R120
C116
C130
R116
CNP102
WH
BK
WH
BK
WH
BK
WH
ORANGE
P6-18 12-E
FROM
TAPE 2 RECORD/PLAYBACK HEAD
19
IC101
R115
RD
R605
17
C110
CNP101
3 2 1
R148
1
BI601
05
RED
OR
C114
C118
C105
C101
C102
R113
R119
C113
C115
R117
C111 C106
Q107
R139
Q114
CNP701B
15
11
13
P6-18 11-E
FROM
TAPE 1 PLAYBACK HEAD
C108
BROWN
BR
RD(R)
1
FFC701
C150
R121
R123
C107
C109
COLOR TABLE
R128
R109
R110
R107
R108
09
07
07
16
14
12
10
8
6
4
2
14
15
16
17
18
19
20
21
22
23
24
R101
R102
C653
C651
C652
11
R13110
C121 9
R129 8
7
C143
6
5
C123
4
R127
3
R137
2
C119
1
C117
15
13
11
9
7
5
3
1
C133
C131
C126
R135
C127 R130
C129 12
13 R150
C125
R133
R601
R603
R602
C135
C128
R132
CNP701A
Q108
R158
C134
P6-11 3-G
TO DISPLAY PWB
16
R124 R122
R138
R136
C120
11
12
CD-MPS900/CD-MPS99
A
CD SERVO PWB-D (TOP VIEW)
40
10
35
15
IC4
5
22
21
25
15
IC6
23
5
10
IC3
C37
C83
70
C70
R39
5
C8
R12
8
7
R99
C36
C35
R50
80
75
R49
R8
3
12
65
45
40
41
C10
1
35
44
25
20
20
30
30
1
80
50 55
61
60
C68
3
2
1
19
20
25
30
10
9
5
35
1
R98
C84
36
18
15
IC2
1
60
61
R29
L3
C53
C59
R28
R78
R63
C47
E
R56
5
R85
C75
R65
10
70 75
65
R59
R60
1
12
R61
55
4
R3
R6
15
IC1
50
L1
R91
R92
5
44
C71
R55
C62
15
10
R67
R66
R77
R64
21
20
25
RM2
IC5
R62
40
25
20
R54
35 30
C82 41 40 35 30
45
C52
R30
R31
R32
R33
R34
R35
R36
R37
23
RM1
33
R74
R72
R69
C66
C51
R15
R16
R13
R14
R93
R18
C46
C17
R73
R76
D
ZD1
L2
F
2 1
C34
R7
C
9 6
C25
1110
R38 C5
B
G
H
1
2
3
4
Figure 6-15 WIRING SIDE OF PWB (5/8)
6 – 15
5
6
CD-MPS900/CD-MPS99
CD SERVO PWB-D (BOTTOM VIEW)
C1
C3
C38
C4
C50
R27
C22
XL1
R86 R89
R81
C23
C64
C65
C42
C58
R80
Q5
R84
R87 R52 R21
C85
C29
C69
C31
C30
C32
C28
C73
C72
C27
R57
R58
C14
R46
R45
R47
R43
R44
R42
R41
C39
CNP5
C61
C63
R82
C44
Q3
R20
C86
6
5
4
3
2
1
R83
C74
D1
C56
B
C
E
C41
CNS3B
P6-18 12-F
FROM
CD MOTOR PWB
Q2
R22
C60 R48
11
1
3
5
7
9
11
CNP6
CNP6A
P6-18 7-D
TO
CHANGER PWB
2
4
6
8
10
R79
Q4
1
R70
R25
R88
R96
R10
R17
R71
R68
R23
R26
CNP3
FFC4
C20
R19
R40
1
R9
R75
R24
C33
C12
C6
XL2
Q1
C26
C11
C21
16
14
12
10
8
6
4
2
C24
15
13
11
9
7
5
3
1
C57
FFC1 16
CNP1
P6-18 7-G
TO
CD PICKUP UNIT
C9
CNP4
C18
C2
C13
C48
FJ1
R94
R97
R95
CNP2
16 14 12 10 8 6 4 2
15 13 11 9 7 5 3 1
16
C76
8 7 6 5 4 3 2 1
1
FFC704
CNP704
P6-12 11-E
TO DISPLAY PWB
CNS601
PP6-14 11-F
FROM MAIN PWB
• The number 1 to 12 are waveform number shown in page 5-2.
7
8
9
10
Figure 6-16 WIRING SIDE OF PWB (6/8)
6 – 16
11
12
7
6
5
4
3
2
1
CD-MPS900/CD-MPS99
A
FW701
D853
D856
R803
C801
C810
R891
Q801
R804
C803
D801
C811
D802
C808
F802
5A/125V
C809
Q841
B
C
E
R808
ZD803
R806
C804
F803
2A/125V
C843
R842
10 9 8 7 6 5 4 3 2 1
CNP801
C802
D806
D803
C805
C807
F804
2A/125V
D845
D844
D842
D843
R801
R805
ZD801
R802
C841
B
D805
R858
D804
C806
C842
R844
ZD802
1
2
3
C861
IC854
R841
1 2 3 4 5 6
CNP802
F801
5A/125V
B C E
R843
C
P6-12 10-A
FROM DISPLAY PWB
P6-14 11-G
FROM MAIN PWB
CNS801
POWER PWB-B1
PT801
MAIN POWER TRANSFORMER
F805
6A/125V
D
AC POWER SUPPLY CORD
AC 120 V, 60 Hz
T.F.
R890
E
C844
WH
D846
RL841
BK
PT841
SUB POWER TRANSFORMER
AUX/VIDEO
G
L-CH
R692
C690
R690
6
C694
R691
C691
R693
C695
5
4
3
2
1
CNS603
1
5
5
WTM901
VIDEO IN
BK
BK
BK
BK
BK
CNP602
P6-13 1-E
TO MAIN PWB
R-CH
C696
1
1
FW901
CNP901
P6-14 10-H
TO MAIN PWB
JK690
GAME INPUT
BI603
F
JK692
HEADPHONES
GAME INPUT
PWB-B2
H
1
2
3
4
Figure 6-17 WIRING SIDE OF PWB (7/8)
6 – 17
COLOR TABLE
BR
BROWN
RD(R)
RED
OR
ORANGE
YL
YELLOW
GR
GREEN
BL
BLUE
VL
VIOLET
GY
GRAY
WH(W)
WHITE
BK
BLACK
PK
PINK
5
6
CD-MPS900/CD-MPS99
COLOR TABLE
BR
BROWN
RD(R)
RED
OR
ORANGE
YL
YELLOW
GR
GREEN
BL
BLUE
VL
VIOLET
GY
GRAY
WH(W)
WHITE
BK
BLACK
PK
PINK
TAPE MECHANISM
ASSEMBLY
P6-12 7-A
TO DISPLAY PWB
CNP702
TAPE MECHANISM PWB-D
FFC702
7
1
1 3 5 7
2 4 6
SW
1
SW
SW
2
SOLENOID
SOLENOID
+TAPE
MOTOR
SW1
CLAMP
SW3
TRAY SW2
RD
3
2
1
7 6 5 4 3 2 1
CNP102
+
M2
MAIN CAM
MOTOR
PK
GR
RX1
BK
SW4
DISC
WH
+
GR
BK
YL
WH
BK
RD
WH
BK
-
WH
BK
CNP101
P6-14 9-B
TO MAIN PWB
5-CHANGER
MOTOR PWB-E
-
P6-14 10-D
TO MAIN PWB
P6-16 7-F
TO
CD SERVO PWB
CNP3
16
6 5 4 3 2 1
WH
GR
WH
GR
WH
RD
CNS3B
FFC1
16
16
6 5 4 3 2 1
CNP1
CNS3A
-
P6-16 7-D
TO
CD SERVO PWB
1
+
1
1
654 321
NM1
SPINDLE MOTOR
-
PICKUP UNIT(306)
CNP3A
NSW1
PICKUP IN
+
CD MOTOR
PWB-F
7
8
9
10
Figure 6-18 WIRING SIDE OF PWB (8/8)
6 – 18
11
NM2
SLED MOTOR
12
BL
PK
SW2
TRAY SW1
GR
YL
WH
WH
CNP6A
CNP6
P6-16 7-D
TO
CD SERVO PWB
10
8
6
4
2
PLAYBACK HEAD
1
M1
TRAY
MOTOR
RECORD/PLAYBACK
HEAD
ERASE HEAD
11
9
7
5
3
1
1
TAPE 2
TAPE 1
11
BK
FFC4
11
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 7. FLOWCHART
CHAPTER
[1] Troubleshooting
1. When the CD does not function
The CD section may not operate when the objective lens of the optical pickup is dirty. Clean the objective lens, and check the playback operation.
When this section does not operate even after the above step is taken, check the following items.
Remove the cabinet and follow the trouble shooting instructions.
"Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attempting
any adjustment make certain that the lens is clean. If not, clean it as mentioned below."
Turn the power off.
Gently clean the lens with a lens cleaning tissue and a small amount of isopropyl alcohol.
Do not touch the lens with the bare hand.
1.
Parts code
UDSKA0004AFZZ
CD optical pickup Lens cleaner disc
HOW TO USE
1. Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the
brush on the CD cleaner disc which has the mark next to it.
2. Place the CD cleaner disc onto the CD disc tray with the brush side down,then
press the play button.
3. You will hear music for about 20 seconds and the CD player will automatically stop.
If it still play continuously, press the stop button.
Cleaning fluid
CAUTION
The CD lens cleaner should be effective for 30-50 operations, however if the
brushes become worn out earlier then please replace the cleaner disc.
If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft
cloth.
Do not drink the cleaner fluid or allow it contact with the eyes. In the event of this
happening then drink and / or rinse with clean water and seek medical advice.
The CD cleaner disc must not be used on car CD players or on computer CD-ROM
drives.
All rights reserved. Unauthorized duplicating, broadcasting and renting this product
is prohibited by law.
Cleaner disc
2. When a CD cannot be played
2.1. "E-CD01" is displayed.
1) Check the power to IC1 (LC78648E), the presence of the clock signal (16.9344 MHz) and the status of the RESET terminal (pin 67 on IC1).
2) Does the pickup move to the PICKUP-IN Switch (NSW1) position?
If (1) and (2) are OK, check the system microcomputer (especially the communication line with the DSP).
2.2. Pressing the CD operation key is accepted, but playback does not occur.
1) Focus-HF system check
2) Tracking system check
3) Spin system check
4) PLL system check
5) Others
7–1
CD-MPS900/CD-MPS99
(1) Focus-HF system check.
Stopped
CH1=500 mV
DC 10:1
Although a CD is inserted and the cover is closed, "NO DISC" is
displayed.
CH3=500 mV
DC 10:1
T
500 ms/div
(500 ms/div)
NORM:20 kS/s
FDO
1
Press the Tray1 CD Eject Button without inserting a disc, and try
starting the playback operation.
TDO
3
CH1
v/DIV
500 mV
=Filter=
Smoothing : ON
BW : FULL
=Offset=
CH1 :
0.000 V
CH2 :
0.0 V
CH3 :
0.000 V
CH4 :
0.00 V
=Record Length=
Main :
100 K
Zoom :
2K
=Trigger=
Mode : AUTO
Type : EDGE CH1
Delay :
0.0 ns
Hold off :
0.2 µs
Figure 1
1. Does the pickup move to the PICKUP-IN Switch (NSW1) position?
Yes
2. Does the focus (lens) move up and down?
(Waveform drawing Figure 1)
No
Sled motor (NM2).
No
Check the focus peripheral circuit.
No
Check the laser diode driver Q1 peripheral circuit.
No
Spindle motor (NM1).
No
Pins 7~11, 13,19 and 20 on IC1
Check the laser diode driver Q1 peripheral circuit.
Yes
3. Is the laser lit?
Yes
4. Is the turntable rotating?
When a disc is loaded, start playback operation.
1. Is focus servo activated?
(Waveform drawing Figure 2)
Yes
2. Does DRF change from "L" to "H"?
No
Is the disc rotating?
No
If the disc is spinning and a HF waveform
is generated, DRF will go H.
Yes
3. Is the HF waveform normal?
(Waveform drawing Figure 3)
Stopped
CH1=500 mV
DC 10:1
CH2=10 V
DC 10:1
No
CH3=1 V
DC 10:1
Check the spin system.
If the level is not normal.
500 ms/div
(500 ms/div)
NORM:20 kS/s
FDO
1
T
2
DRF
TE
3
CH Position To
-3 div
-1 div
0 div
+1 div
+3 div
=Filter=
=Offset=
=Record Length=
Smoothing : ON CH1 :
0.000 V
Main :
100 K
BW : FULL
CH2 :
0.0 V
Zoom :
2K
CH3 :
0.00 V
CH4 :
0.00 V
CH2
Position
0.20 div
=Trigger=
Mode : AUTO
Type : EDGE CH1
Delay :
0.0 ns
Hold off :
0.2 µs
Vp-p=1.0 V~1.3 V
0.5 mV/div,0.5 µsec/div
Figure 2
Figure 3
7–2
CD-MPS900/CD-MPS99
(2) Focus-HF system check.
Check the TE waveform at pin 17 on IC1.
If the waveform shown in Figure 4 appears and soon after NO
DISC appears?
No
"Initialization" is possible, but play is not possible?
Yes
The tracking servo is not activated.
Check the peripheral circuits at pins 16, 17 and 22 on IC1, and
FFC1.
Yes
A normal jump operation cannot be completed or the beginning
of the track cannot be found.
Check the around pin 22 on IC1.
No
"Initialization" is not possible.
Data cannot be read. Check the VCO-PLL (Pin76~80 on IC1)
system.
T
Stopped
CH1=10 V
DC 10:1
CH2=1 V
DC 10:1
100 ms/div
(100 ms/div)
NORM:100 kS/s
TE
2
T
1
DRF
=Filter=
Smoothing : ON
BW : FULL
=Offset=
CH1 :
0.0 V
CH2 :
0.00 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
100 K
Zoom :
2K
=Trigger=
Mode : NORMAL
Type : EDGE CH1
Delay :
2.924 ms
Hold off :
0.2 µs
Figure 4
(3) Spin system check.
Press the OPEN/CLOSE switch without inserting a disc, and
then try starting the play operation.
1. The turntable rotates a little?
(Waveform drawing Figure 5)
Yes
The spin driver circuit is OK.
No
2. The turntable doesn't rotate.
Check around pin 24 on IC1, pins 3 and 4 on IC2, and CNS3A/
CNS3B.
Stopped
CH1=200 mV
DC 10:1
T
1999/04/07 09:51:15
500 ms/div
(500 ms/div)
NORM:20 kS/s
CH2=500 mV
DC 10:1
T
FDO
2
1
SPDO
=Filter=
Smoothing : ON
BW : FULL
=Offset=
CH1 :
0.000 V
CH2 :
0.000 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
100 K
Zoom :
2K
Figure 5
7–3
=Trigger=
Mode : NORMAL
Type : EDGE CH2
Delay :
2.924 ms
Hold off :
0.2 µs
CD-MPS900/CD-MPS99
(4) PLL system check.
Stopped
CH1=500 mV
DC 10:1
When a disc is loaded, start play operation.
CH3=1 V
DC 10:1
1999/04/05 17:33:17
CH4=1 V
500 ms/div
(500 ms/div)
DC 10:1
NORM:20 kS/s
PDO1
3
4
The HF waveform is normal, but the TOC data cannot be read.
PDO2
T
Check the PDO waveform. (Figure 6)
FDO
1
CH1
v/DIV
500 mV
=Filter=
Smoothing : ON
BW : FULL
Check around pins 76~80 on IC1.
=Offset=
CH1 :
0.000 V
CH2 :
0.0 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
100 K
Zoom :
2K
=Trigger=
Mode : AUTO
Type : EDGE CH2
Delay :
0.0 ns
Hold off :
0.2 µs
Figure 6
(5) Others.
The HF waveform is normal and the time is displayed normally,
but no sound is produced. Or the sound has dropouts.
Is pin 69 (C2F) on IC1 "L"?
No
Yes
1. When playing at normal speed.
Check the peripheral circuit at pin 39 (DOUT) on IC1 and the
waveform (Figure 7).
There are too many error flags on a damaged disc which makes
error correction impossible.
Check again using a known good disc.
If OK, Check the unit.
Stopped
CH1=2 V
DC 10:1
T
1999/04/07 09:25:28
500 ns/div
(500 ns/div)
NORM:200 MS/s
T
1
DOUT
=Filter=
Smoothing : ON
BW : FULL
=Offset=
CH1 :
0.00 V
CH2 :
0.00 V
CH3 :
0.00 V
CH4 :
0.00 V
=Record Length=
Main :
1K
Zoom :
100
Figure 7
7–4
=Trigger=
Mode : NORMAL
Type : EDGE CH1
Delay :
2.887 ms
Hold off :
0.2 µs
CD-MPS900/CD-MPS99
Service
Audio
E
Market
CD-MPS900/CD-MPS99
Manual 8. OTHERS
CHAPTER
[1] Function table of IC
IC1 VHiLC78648E-1: CD Servo (LC78648E) (1/2)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12*
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29*
Terminal Name
AVDD1
SLCO
EFMIN
RF
LPF
JITTC
AIN
CIN
BIN
DIN
FEC
PHLPF/RFMON
VREF
EIN
FIN
TEC
TE
TEIN
LDD
LDS
FDO
TDO
SLDO
SPDO
AVSS2
AVDD2
DVDD
DVSS
VPB
Input/Output
Output
Output
Input
Output
Output
Input
Input
Input
Input
Input
Output
Output
Output
Input
Input
Output
Output
Input
Output
Input
Output
Output
Output
Output
—
—
—
—
Output
Setting in Reset
—
—
—
—
—
—
—
—
—
—
30*
31*
DEFECT
FSEQ
Output
Output
L
L
32
33*
EFLG
FSX
Output
Output
L
L
34
CONT1
Input/Output
Input
35
CONT2
Input/Output
Input
36
CONT3
Input/Output
Input
37*
MONI1
Input/Output
Input
38*
39*
40
41
42
43
MONI2
DOUT
TEST
LVDD
LCHO
LRVSS
Output
Output
Input
—
Output
—
L
L
L
—
LVDD/2
—
ZHI
AVDD1/2
—
—
—
—
—
ADAVDD/2
ADAVDD/2
ADAVDD/2
ADAVDD/2
—
—
—
—
H
Function
Analog power supply pin 1.
slice level con- Slice level Control output pin.
trol.
RF signal input pin.
RF signal Output pin.
RF signal DC level detection LPF capacitor connection pin.
Jitter detection capacitor connection pin.
A signal input pin.
C signal input pin.
B signal input pin.
D signal input pin.
FE signal LPF capacitor connection pin.
Reference supply setting terminal.
VREF voltage output pin.
E signal input pin.
F signal input pin.
TE signal LPF capacitor connection pin.
TE signal output pin.
TES signal generation TE signal input pin
Laser power control signal output pin.
Laser power control signal input pin.
Focus control output pin. D/A output.
Tracking control output pin. D/A output.
Thread control output pin. D/A output.
Spindle control output pin. D/A output.
Analog GND pin 2. Must always be connected to 0 V.
Analog power supply pin 2.
Digital power supply pin.
Digital GND pin 2. Must always be connected to 0 V.
Rough servo/phase control automatic switching monitor output pin.“H” for rough
servo and “L” for phase servo.
Defect signal output pin.
Synchronization signal detection output pin.
Outputs a high level when the Synchronization signal detection from the EFM signal and the internally generated Synchronization signal agree.
C1, C2 error correction monitor pin
7.35 kHz Synchronization signal output pin.
CLV playback mode.
General purControlled by command from the microprocessor. Any of these
pose I/O pin 1. that are unused must be either set up as input pin ports and
connected to 0 V, or set up as output pin ports and left open.
General purpose I/O pin 2.
General purpose I/O pin 3.
External deiemphasis setting pin, INternal signal monitor pin 1. Controlled by
microprocessor.
Internal signal monitor pin 2.
Digital OUT output Pin. (EIAJ format)
Test input pin. Must always be connected to 0 V.
L channel Power supply pin.
Left channel
D/A converter L channel output supply pin.
LR channel GND pin. Must always be connected to 0 V.
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
8–1
CD-MPS900/CD-MPS99
IC1 VHiLC78648E-1: CD Servo (LC78648E) (2/2)
Pin No.
44
45
46
47
48
Terminal Name
RCHO
RVDD
XVSS
XOUT
XIN
Input/Output
Output
—
—
Output
Input
Setting in Reset
RVDD /2
—
—
Oscillator
Oscillator
49
50
XVDD
IOMODE
—
Input
—
—
51
52*
53
F16MIN
OUT1
16MOUT
Input
Output
Output
54
ASLRCK
Input
—
L
CLK
Output
—
55
ASDACK
Input
—
56
ASDFIN
Input
—
57
58
59
60
61
62
63
64
65
66
67
LRSK
DATACK
DATA
DVDD
DVSS
CE
CL
DI
DO
WRQB
RESB
Output
Output
Output
—
—
Input
Input
Input
Output
Output
Input
L
L
L
—
—
—
—
—
(H)
L
—
68
69
DRF
C2F/SBCK
Output
Input/Output
L
Input
70
CONT6/SBCK
Input/Output
Input
71*
72*
73
74
MONI5
MONI4
MONI3
CONT5
Output
Output
Output
Input/Output
L
L
L
Input
75
CONT4
Input/Output
Input
76
77
78
PDO1
PDO2
PCKIST
Output
Output
Input
—
—
—
79
80
VVSS
VVDD
—
—
—
—
Function
Right channel R channel Power supply pin.
D/A converter R channel output supply pin.
Digital GND pin. Must always be connected to 0 V
Power supply for crystal oscillator.
Crystal
Connected for a 16.9344 MHz crystal oscillator pin.
oscillator
Digital power supply pin. Must always be connected to 0 V
CONT4 to 6. MONI3~5, DRF, WRQB pin output mode switching input pin.
”L” setting: Normal output “H” setting: Nch open drain output
DF. DAC external clock input pin.
General-purpose output pin 1.
16.9344 MHz output port.
Left/Right clock input pin.
(Must be connect to 0 V when unused.)
Bit clock input pin.
Anti-shock
(Must be connect to 0 V when unused.)
Left/Right channel data input pin.
(Must be connect to 0 V when unused.)
Left/Right channel data output pin.
Digital data
Bit clock output pin.
output
Left/Right clock output pin.
Digital power supply pin.
Digital GND pin 2. Must always be connected to 0V.
Chip enable signal input pin.
Data transfer clock input pin.
Microcomputer Interface Data output pin.
Data output pin. (Try state output.)
Interruption signal output pin.
Reset input pin for LSI.
This pin must be set LOW briefly after power is first applied.
Focus ON detection pin.
Error flag monitor pin, or sub
Controlled by commands from the microprocode read clock input pin.
cessor.
General-purpose I/O pin 6, or
Controlled by commands from the microprosub code read clock input pin.
cessor.
Any of these that are unused must be either
set up as input pin ports and connected to 0
V, or set up as output pin ports and left open.
Internal signal monitor pin 5.
Internal signal monitor pin 4.
Internal signal monitor pin 3.
General purControlled by command from the microprocessor. Any of
pose I/O pin 5. these that are unused must be either set up as input pin ports
and connected to 0 V, or set up as output pin ports and left
General purpose I/O pin 4. open when unused.
PLL
Phase comparison output pin 1 to control built-in VCO.
Phase comparison output pin 2 to control built-in VCO.
Resistor connection pin to set current for PDO1 and 02 outputs.
Built-in VCO GND pin. Must always be connected to 0 V.
Built-in VCO power supply pin.
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
The same potential must be supplied to all power supply pins, i, e., AVDD1, AVDD2, XVDD, DVDD, LVDD and RVDD)
8–2
CD-MPS900/CD-MPS99
DRF
*RES
*WRQ
DO
DI
CL
CE
DVSS
73
C2F/SBCK
75 74
CONT6/SBCK
76
MONI5
PD01
77
72 71
70
69 68
67
66 65
64
63 62
61
MONI4
PD02
78
MONI3
PCKIST
79
CONT5
VVSS
80
CONT4
VVDD
IC1 VHiLC78648E-1: CD Servo (LC78648E)
AVDD1
1
60 DVDD
SLCO
2
59 DATA
EFMIN
3
58 DATACK
RF
4
57 LRSY
LPF
5
56 ASDFIN
JITTC
6
55 ASDACK
AIN
7
54 ASLRCK
CIN
8
53 F16MOUT
BIN
9
52 OUT1
DIN 10
51 F16MIN
LC78648E
FEC 11
50 IOMODE
PHLPF/RFMON 12
49 XVDD
VREF 13
48 XIN
EIN 14
47 XOUT
FIN 15
46 XVSS
TEC 16
45 RVDD
TE 17
44 RCHO
VREF
32 33
34
35 36
37
38 39
40
EFLG
CONT1
CONT2
MONI1
MONI2
TEST
MONITOR
VREF
A/D
A/D
LDD
LDS
LPF
RF
AIN
CIN
BIN
DIN
FEC
EIN
FIN
TEC
TE
TEIN
JITTC
SLCO
EFMIN
PDO1
PDO2
PCKIST
VVDD
VVSS
XVDD
XVSS
XIN
XOUT
F16MIN
F16MOUT
ASLRCK
ASDACK
ASDFIN
RVDD
RCHO
LRVSS
LCHO
LVDD
DOUT
31
CONT3
29 30
FSX
28
FSEQ
AVSS
PHLPF/RFMON
26 27
DEFECT
25
VPB
24
DVSS
23
DVDD
22
AVDD2
21
SPDO
41 LVDD
SLDO
42 LCHO
LDS 20
TDO
43 LRVSS
LDD 19
FDO
TEIN 18
SERVO
PROCESSOR
APC
RF SIGNAL
PROCESSOR
FOCUS ERROR
PROCESSOR
AUTO
ADJUST
RAM
TRACK
JUMP
RUPTURE
DEFECT
CLV
CAV
CONTROL
DRF
CPU I/F
PORT
SLICE LEVEL
CONTROL
FRAME SYNC
DETECT,PROTECT,
INSERT,
EFM DECODE
PLL
EXTERNAL
AUDIO IN
LPF
DRF
VPB
JITTER/DETECT
CLOCK
GENERATOR
AVDD1
AVSS
AVDD2
DEFECT
TRACKING ERROR
PROCESSOR
RAM
FDO
TDO
SPDO
SLDO
CONT1~6
OUT1
FSEQ
FSX
EFLG
C2F
ERROR
CORRECTION
INTERPOLATION
MUTE
CL
CE
DI
DO
WRQB
MONITOR SIGNAL
SELECTOR
ATTENUATION
SUBCODE DECODE
CRC & TEXT
8FS DIGITAL
FILTER
DEEMPHASIS
AUDIO OUT
1bit DAC
SERIAL
OUT
MONI1~5
DOUT
LRSY
DATACK
DATA
DVDD
DVDD
DVSS
RESB
TEST
IOMODE
DVSS
Figure 8-3 BLOCK DIAGRAM OF IC
8–3
CD-MPS900/CD-MPS99
IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12*
13
14*
15
16*
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Terminal Name
VO3+
VO3VO2+
VO2VO1+
VO1PGND1
REGIN
PVCC1
REGOUT
VIN1
VIN1G
VIN2
VIN2G
VIN3
VIN3G
VIN4
VIN4G
FWD5
REV5
VCONT5
FWD6
REV6
VCONT6
VREFIN
SGND
SVCC
PVCC2
MUTE
PGND2
VO6+
VO6VO5+
VO5VO4+
VO4-
Function
BTL Output pin (+) for channel 3.
BTL Output pin (-) for channel 3.
BTL Output pin (+) for channel 2.
BTL Output pin (-) for channel 2.
BTL Output pin (+) for channel 1.
BTL Output pin (-) for channel 1.
Power GND for channels 1,2,3 and 4 (BTL).
Regulator pin (External PNP base).
Power for channels 1,2,3 and 4 (BTL). (SVCC short-crircuited)
Regulator pin (External PNP collector).
Input pin for channel 1
Input pin for channel 1 (for gain control)
Input pin for channel 2
Input pin for channel 2 (for gain control)
Input pin for channel 3
Input pin for channel 3 (for gain control)
Input pin for channel 4
Input pin for channel 4 (for gain control)
CH5 Output change pin (FWD). Logic input for bridge.
CH5 Output change pin (REV). Logic input for bridge.
Input pin for CH5 output voltage control
CH6 Output change pin (FWD). Logic input for bridge.
CH6 Output change pin (REV). Logic input for bridge.
Input pin for CH5 output voltage control.
Reference voltage input pin.
Signal system GND
Signal system power (PVCC1 short - circuited)
Power for channel 5 and 6 (H bridge).
Input pin for BTL mute.
Power GND for channels 5 and 6 (H bridge).
H bridge Output pin (+) for channel 6.
H bridge Output pin (-) for channel 6.
H bridge Output pin (+) for channel 5.
H bridge Output pin (-) for channel 5.
BTL Output pin (+) for channel 4.
BTL Output pin (-) for channel 4.
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
*
Set power system GND to the minimum potential together with SGND
*
Short-circuit three pins of power system SVSS and PVCC1 externally before use.
8–4
CD-MPS900/CD-MPS99
IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261)
1
+
-
+
-
CH3
36
CH4
35
2
+
-
+
-
3
34
4
33
+
-
32
Pre Drive
5
CH2
6
+
-
7
8
31
CH5
30
29
Pre Drive
+
-
9
CH1
28
CH6
+
VOLTAGE
CONTROL AMP
+
-
BTL
10
22k
11
22k
1k
16
17
18
+
DUFFER AMP
For 1/2 VCC
DUFFER AMP
For VREF
11k
Reference
voltage
+
22k
+
Band gad
1k
Figure 8-5 BLOCK DIAGRAM OF IC
8–5
25
24
23
22
21
TSD
1k
11k
Mode
select
22k
1k
15
+
-
11k
13
14
26
Mode
select
12
27
+
+
-
11k
20
19
CD-MPS900/CD-MPS99
IC601 VHiLC75341/-1: Audio Processor (LC75341)
VSS
LOUT
5
LBASS
6
LTRE
7
8
9-12
LIN
LSEL0
L4-1
20
RBASS
21
ROUT
22
VREF
23
24
VDD
CLK
LOUT
3
4
Terminal Name
R1-4
RSEL0
RIN
RTRE
LBASS
CE
Pin No.
13-16
17
18
19
LTRE
2
Function
Serial data and clock input pin for control.
Chip enable pin.
Data written into an internal latch in a
timing of "H" to "L".
Each analog switch is activated.
Data transfer enabled at "H" level.
Ground pin.
Bass band filter comprising
capacitor and resistor connection pin
and bass/treble output pin.
Bass band filter comprising capacitor
and resistor connection pin.
Treble band filter comprising capacitor
and resistor connection pin.
Volume + equalizer output pin.
Input selector output pin.
Input signal pin.
LIN
Terminal Name
DI
LSEL0
Pin No.
1
8
7
6
5
4
Function
Input signal pin.
Input selector output pin.
Volume + equalizer output pin
Treble band filter comprising capacitor
and resistor connection pin.
Bass band filter comprising capacitor
and resistor connection pin.
Bass band filter comprising capacitor
and resistor connection pin and bass/
treble output pin.
0.5x VDD voltage generation block
for analog ground. Capacitor of several 10µF to be connected between
VREF and AWSS (VSS) as a countermeasure against power ripple.
Supply pin
Serial data and clock input pin for control.
L4 9 CD
L3 10
L2 11
L1 12
Tuner
Tape
CONTROL
CIRCUIT
Video
CONTROL
CIRCUIT
R1 13
LVref
2 CE
CCB
INTERFACE
1 DI
24 CLK
CONTROL
CIRCUIT
R2 14
3 VSS
RVref
RSEL0
17
18
19
20
21
ROUT
22 VREF
RBASS
R4 16
RTRE
23 VDD
RIN
R3 15
Figure 8-6 BLOCK DIAGRAM OF IC
8–6
CD-MPS900/CD-MPS99
IC701 RH-iXA008AWZZ: System Microcomputer (IXA008AW) (1/2)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14*
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31-33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49*
50*
51*
52*
53
54
55
56
57
58-68
69
70
71
72
Port Name
VDD
P37
P36
P35
P34
P33
P32
P31
P30
RESET
X2
X1
IC(VPP)
XT2
P04
VDD
P27
P26
P25
P24
P23
P22
P21
P20
AVSS
ANI7
ANI6
ANI5
ANI4
ANI3
ANI2-ANI0
AVDD
AVREF
INTP3
P02
INTP1
INTP0
VSS
P74
P73
P72
P71
P70
VDD
P127
P126
P125
P124
P123
P122
P121
P120
P117
P116
P115
FIP41-FIP31
P101/FIP30
P100/FIP29
P97/FIP28
P96/FIP27
Terminal Name
VDD
-20dBATT
T BIAS
T_REC/PLAY
T_T1/T2
CD RESOUT
CD_WRQ
SUB CE
ILLU LED
RESET
XOUT
XIN
VPP
NO USE
CD_DRF
VDD
CLK
DI
DO
CE
CD CE
CD CLK
CD DI
CD DO
AVSS
T RUN PULS
TUN SM
T_FP SW
PROTECT
VOL JOG
KEY 2-KEY 0
AVDD
AVREF
P_IN
PHOTO
SP DET
REMOCON
VSS
S MUTE
TIMER LED
T_SOL B
T_MOTOR
T_SOL A
VDD
SP RLY
AC RLY
RDS RST
RDS READY
RDS RDDA
RDS RDCL
TRAY SW2
TRAY SW1
DISC SW
CLAMP SW
DIST
S30-S20
S19/DEST0
S18/DEST1
S17/DEST2
S16/DEST3
Input/Output
Input
Output
Output
Output
Output
Output
Input
Output
Output
Input
Output
Input
—
—
Input
Input
Output
Output
Input
Output
Output
Output
Output
Input
—
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
—
Output
Output
Output
Output
Output
Input
Output
Output
Output
Input
Input
Output
Input
Input
Input
Input
Input
Output
Input
Output
Output
Output
Function
(+) Power supply 5 V.
-20dB Attenuator.
Tape record bias control.
Tape REC/PLAY control.
Tape T1/T2 Control.
CD Reset.
CD WRQ input.
MP3 Sub-micom CE.
FL Edge light control.
Reset Input.
Main clock output 4.19 MHz.
Main clock input 4.19 MHz.
GND
Open
CD DRF detect.
(+) Power supply 5 V.
Clock output.
Data output.
Data input.
CE Output.
CD Chip enable.
CD Clock.
CD Data output.
CD Data input.
Analog ground.
Tape T1/T2 Run Pulse detect.
Tuner signal meter.
Tape Fool Proof A & B SW.
Power abnormal detect.
Volume jog input.
Key input.
Analog power supply 5 V.
Analog reference voltage 5 V.
Power failure detect.
5-Changer Photo SW.
Speaker abnormal detect.
Remocon input.
Ground voltage.
System mute control.
Timer LED control.
Tape 2 solenoid control.
Tape motor control.
Tape 1 solenoid control.
(+) Power supply 5 V.
Speaker relay control.
AC relay control.
RDS reset.
RDS ready.
RDS data.
RDS clock.
5-Changer Tray SW2.
5-Changer Tray SW1.
5-Changer Disc SW.
5-Changer Clamp SW.
Destination input.
FL Segment driver.
FL segment driver/Destination input.
FL segment driver/Destination input.
FL segment driver/Destination input.
FL segment driver/Destination input.
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
8–7
CD-MPS900/CD-MPS99
IC701 RH-iXA008AWZZ: System Microcomputer (IXA008AW) (2/2)
Pin No.
73-78
79
80-88
89-100
Port Name
FIP26-FIP21
VLOAD
FIP20-FIP11
FIP10-FIP0
Terminal Name
S15-S10
VLOAD
S9-S1
G12-G1
Input/Output
Output
Input
Output
Output
Function
FL segment driver.
VLOAD -35 V
FL segment driver.
FL grid driver.
VDD
1
VDD
-20dBATT
2
P37
T_BIAS
3
T_REC/PLAY
S5
S6
S7
S8
P84/FIP17 83
P85/FIP18 82
P86/FIP19 81
S3
S4
S2
S1
P81/FIP14 86
P82/FIP15 85
P83/FIP16 84
G12
FIP12 88
P80/FIP13 87
G11
FIP11 89
G10
G9
FIP9 91
FIP10 90
G8
G7
G4
FIP3 97
FIP7 93
FIP8 92
G3
FIP2 98
G5
G6
G2
FIP1 99
FIP4 96
FIP5
95
FIP6 94
G1
FIP0 100
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
P87/FIP20
80
S9
VLOAD
79
VLOAD
P36/BUZ
P90/FIP21
78
S10
4
P35/PCL
P91/FIP22
77
5
P34/T12
P92/FIP23
76
S11
S12
CD_RESOUT
6
P33/T11
P93/FIP24
75
S13
CD_WRQ
7
P94/FIP25
P95/FIP26
74
S14
8
P32/TO2
P31/TO1
73
S15
9
P30/TO0
P96/FIP27
72
P97/FIP28
71
RESET
10
RESET
XOUT
11
X2
P100/FIP29
70
XIN
12
X1
P101/FIP30
69
VPP
13
IC(VPP)
P102/FIP31
68
S16
(DIST3)
S17
(DIST2)
S18
(DIST1)
S19
(DIST0)
S20
14
XT2
P103/FIP32
67
S21
CD_DRF
15
P04/XT1
P104/FIP33
66
S22
VDD
16
VDD
P105/FIP34
65
S23
CLK
17
P27/SCK0
P106/FIP35
64
S24
DI
18
P26/SO0/SB1
P107/FIP36
63
S25
DO
19
P25/SI0/SB0
P110/FIP37
62
S26
CE
20
P24/BUSY
P111/FIP38
61
CD_CE
21
P23/STB
P112/FIP39
60
S27
S28
CD_CLK
22
P22/SCK1
P113/FIP40
59
29
CD_DI
23
P21/SO1
P114/FIP41
58
30
CD_DO
24
P20/SI1
P115/FIP42
57
DIST
AVSS
25
AVSS
P116/FIP43
56
CLAMP SW
T_RUN PULS
26
P17/ANI7
P117/FIP44
55
DISC SW
TUN_SM
27
P16/ANI6
P120/FIP45
54
TRAY SW1
T_FP SW
PROTECT
28
P121/FIP46
P122/FIP47
53
29
P15/ANI5
P14/ANI4
52
TRAY SW2
RDS_RDCL
VOL_JOG
30
P13/ANI3
P123/FIP48
51
RDS_RDDA
P12/ANI2
P11/ANI1
P10/ANI0
AVDD
AVREF
P03/INTP3
P02/INTP2
P01/INTP1
P00/INTPOT0
VSS
P74
P73
P72
P71
P70
VDD
P127/FIPS2
P126/FIPS1
P125/FIPS0
P124/FIP49
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
KEY2
KEY1
KEY0
AVDD
AVREF
P-IN
PHOTO
SP_DET
REMOCON
VSS
S MUTE
TIMER LED
T_SOL
T MOTOR
VOL_LED
VDD
SP_RLY
AC_RLY
RDS_RST
RDS_READY
(SPAN)
IXA008AW
Figure 8-8 BLOCK DIAGRAM OF IC
8–8
CD-MPS900/CD-MPS99
IC851 VHIAN80T53/-1: Multi Regulator (AN80T53)
Pin
No.
1
2
3
4
5
6
7
Terminal Name
Function
REG4 Output
REG3 Output
VCC
GND
MODE 1
REG2 Output
REG1 Output
5.1 V power supply with a minimum peak out current of 1200 mA.
13 V power supply with a minimum peak out current of 1350 mA.
Connected to Power supplies.
Connected to the IC substrate.
REG1, REG2,REG3 and REG4 outputs are turned ON when this pin is 5 V.
10 V power supply with a minimum peak out current of 800 mA.
8.5 V power supply with a minimum peak out current of 700 mA.
Peak Current Protection,
Thermal Protection,
Load Short Protection.
Out puts
+
-
+
-
Prc
Drive
+
-
Prc
Drive
+
-
Prc
Drive
Prc
Drive
Reference
Voltage
5
MODE1
2
REG3
13V
3
4
1
7
6
VCC
GND
REG4
5.1V
REG1
8.5V
REG2
10.0V
Figure 8-9 BLOCK DIAGRAM OF IC
8–9
CD-MPS900/CD-MPS99
[2] FL Display
FL701 VVKNA12MM44-1
GRID ASSIGNMENT
1a
1a
2a
1a
2a
1a
2a
1a
1a
2a
2a
1a
2a
1a
1a
col2
Dot2
2a
2a
1a
2a
2a
col1
1G
2G 3G 4G 5G 6G 7G 8G 9G
10G 11G
12G
D5a
D5a
D5b
D5c
a
D4a
D4a
D4b
h j k
f
D4c
D1b
D3c
m
e
(2G~11G)
D1a
D1a
n
d
D2c
D2b
c
p
r
D2a
D2a
b
g
D3a
D3a
(1G)
Dot1
D1c
D1b
ANODE CONNECTION
2G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
1G
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
FOLDER
TITLE-1
TITLE-2
TITLE-3
5
D5-a
D5-b
D5-c
4
D4-a
D4-b
D4-c
3
D3-a
D3-b
D3-c
2
D2-a
D2-b
D2-c
1
D1-a
D1-b
D1-c
3G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
4G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
5G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
6G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
7G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
8G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
P30
51
OUTER DIMENSIONS
10G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
Col1
Col2
9G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
Dot1
Dot2
11G
1a
1b
1k
1j
1h
1f
1m
1d
1g
1p
1e
1n
1r
1c
2a
2b
2k
2j
2h
2f
2m
2d
2g
2p
2e
2n
2r
2c
12G
TOTAL
RDS
TA
PTY
PTYI
TP
SLEEP
DAILY
(L)
(R)
REC
ST
(
)
MEMORY
(
kHz
MHz
)
MP3
X-BASS
1
PATTERN AREA
PIN CONNECTION
PIN NO.
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
CONNECTION F2 F2 NP NP P30 P29 P28 P27 P26 P25 P24 P23 P22 P21 P20 P19 P18 P17 P16 P15 P14 P13 P12 P11 P10 P9
PIN NO.
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
CONNECTION P8 P7 P6 P5 P4 P3 P2 P1 12G 11G 10G 9G 8G 7G 6G 5G 4G 3G NX NX 2G 1G NP F1
8 – 10
1
F1
CD-MPS900/CD-MPS99
— MEMO —
8 – 11
CD-MPS900/CD-MPS99
PARTS GUIDE
MINI COMPONENT SYSTEM
MODEL
CD-MPS900
CD-MPS900 Mini Component System consisting of CD-MPS900
(main unit) and CP-MPS900 (speaker system).
MINI COMPONENT SYSTEM
MODEL
CD-MPS99
CD-MPS99 Mini Component System consisting of CD-MPS99
(main unit) and CP-MPS99 (speaker system).
“HOW TO ORDER REPLACEMENT PARTS”
To have your order filled promptly and correctly, please furnish the
following information.
1. MODEL NUMBER
2. REF. No.
3. PART NO.
4. DESCRIPTION
For U.S.A. only
Contact your nearest SHARP Parts Distributor to order.
For location of SHARP Parts Distributor,
Please call Toll-Free;
1-800-BE-SHARP
MARK: SPARE PARTS-DELIVERY SECTION
Explanation of capacitors/resistors parts codes
Capacitors
Resistors
VCC ....................... Ceramic type
VCK ........................ Ceramic type
VCT ........................ Semiconductor type
VC • • MF ............... Cylindrical type (without lead wire)
VC • • MN ............... Cylindrical type (without lead wire)
VC • • TV ................ Square type (without lead wire)
VC • • TQ ............... Square type (without lead wire)
VC • • CY ............... Square type (without lead wire)
VC • • CZ ............... Square type (without lead wire)
VC • • • • • • • • • J .. The 13th character represents capacity difference.
("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%,
"C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.)
VRD ....................... Carbon-film type
VRS ........................ Carbon-film type
VRN ....................... Metal-film type
VR • • MF ............... Cylindrical type (without lead wire)
VR • • MN ............... Cylindrical type (without lead wire)
VR • • TV ................ Square type (without lead wire)
VR • • TQ ............... Square type (without lead wire)
VR • • CY ............... Square type (without lead wire)
VR • • CZ ............... Square type (without lead wire)
VR • • • • • • • • • J .. The 13th character represents error.
("J" ±5%, "F" ±1%, "D" ±0.5%.)
If there are no indications for the electrolytic capacitors, error is ±20%.
If there are no indications for other parts, the resistors are ±5%
carbon-film type.
CAUTION:FOR CONTINUED
PROTECTION AGAINST FIRE
HAZARD, REPLACE ONLY WITH
SAME TYPE F801, F802 5A, 125V /
F803, F804 2A, 125V / F805 6A, 125V FUSES
ATTENTION:POUR ASSURER
UNE LONGUE PROTECTION CONTRE
UNINCENDIE, REMPLACER SEULEMENT
PAR UN FUSIBLE DE
TYPE F801, F802 5A, 125V /
F803, F804 2A, 125V / F805 6A, 125V
NOTE:
Parts marked with “
” are important for maintaining the safety of the set.
Be sure to replace parts with specified ones for maintaining the safety and performance of the set.
CD-MPS900/CD-MPS99
NO.
PRICE
RANK
PART CODE
DESCRIPTION
ZD802
ZD803
ZD805
ZD902,903
CD-MPS900/CD-MPS99
INTEGRATED CIRCUITS
IC1
IC2
VHILC78648E-1
VHILA6261//-1
J
J
IC3
IC4
IC5
IC6
IC101
VHILC78683E-1
VHIL8316V35-1
RH-IXA006AWZZ
VHISI3033LUS-1
VHIAN7345K/-1
J
J
J
J
J
IC301
IC302
IC303
VHITA7358AP-1
VHILC72131/-1
VHILA1832S/-1
J
J
J
IC601
IC701
VHILC75341/-1
RH-IXA008AWZZ
J
J
IC851
IC854
IC901
VHIAN80T53/-1
VHIAN78L05/-1
VHISTK41244-1
J
J
J
AW CD Servo,LC78648E
AN Focus/Tracking/Spin/Sled Driver,
LA6261
BH MP3 Decoder,LC78683E
D-RAM,L8316V35
AT Microcomputer,IXA006AW
AG Voltage Regulator,SI3033LUS
AM Playback and Record/Playback
Amp.,AN7345K
AG FM Front End,TA7358AP
AP PLL (Tuner),LC72131
AN FM IF Det./FM Mpx./AM IF,
LA1832S
AM Audio Processor,LC75341
AX System Microcomputer,
IXA008AW
AL Multi Regulator,AN80T53
AE Voltage Regulator,AN78L05
BF Power Amp.,STK41244
TRANSISTORS
Q1
Q2
Q3~5
Q101~104
Q105~108
Q109
Q110
Q111
Q112
Q113,114
Q302
Q360
Q601~604
Q706~708
Q709,710
Q711
Q712~714
Q715
Q716
Q717
Q801
Q841
Q885,886
Q901~904
Q905
Q906,907
Q908,909
QAP1
QAP2
VSKTA1504Y/-1
VSKTA1271Y/-1
VS2SD601AR/-1
VSKTC3200GR-1
VSKTC3875GR-1
VSKTA1504Y/-1
VSKRC104S//-1
VSKTC3203Y/-1
VSKTA1504Y/-1
VSKRC104S//-1
VSKTC3194Y/-1
VSKTA1266GR-1
VSKTC3875GR-1
VSKTA1273Y/-1
VSKRC102S//-1
VSKRA107S//-1
VSKRC104S//-1
VSKRA107S//-1
VSKRC104S//-1
VSKRA107S//-1
VSKTA1274Y/-1
VSKTC3199GR-1
VSKTC3875GR-1
VSKTC3875GR-1
VSKTC3199GR-1
VSKTC3203Y/-1
VSKTC3875GR-1
VSKTC3199GR-1
VSKRC104M//-1
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AB
AC
AC
AC
AB
AB
AC
AC
AB
AC
AD
AB
AB
AE
AB
AB
AC
AB
AC
AB
AE
AB
AB
AB
AB
AC
AB
AB
AC
Silicon,PNP,KTA1504 Y
Silicon,PNP,KTA1271 Y
Silicon,NPN,2SD601 AR
Silicon,NPN,KTC3200 GR
Silicon,NPN,KTC3875 GR
Silicon,PNP,KTA1504 Y
Digital,NPN,KRC104 S
Silicon,NPN,KTC3203 Y
Silicon,PNP,KTA1504 Y
Digital,NPN,KRC104 S
Silicon,NPN,KTC3194 Y
Silicon,PNP,KTA1266 GR
Silicon,NPN,KTC3875 GR
Silicon,PNP,KTA1273 Y
Digital,NPN,KRC102 S
Digital,NPN,KRA107 S
Digital,NPN,KRC104 S
Digital,NPN,KRA107 S
Digital,NPN,KRC104 S
Digital,NPN,KRA107 S
Silicon,PNP,KTA1274 Y
Silicon,NPN,KTC3199 GR
Silicon,NPN,KTC3875 GR
Silicon,NPN,KTC3875 GR
Silicon,NPN,KTC3199 GR
Silicon,NPN,KTC3203 Y
Silicon,NPN,KTC3875 GR
Silicon,NPN,KTC3199 GR
Digital,NPN,KRC104 M
VHDKDS184//-1
VHDDS1SS133-1
VHDDS1SS133-1
VHDDS1SS133-1
VHDDS1SS133-1
VHDD10XB60F-1
VHD1N4004S/-1
VHD1N4004S/-1
VHDDS1SS133-1
VHD1N4004S/-1
VHDDS1SS133-1
VHDDS1SS133-1
VHDDS1SS133-1
VHDDS1SS133-1
VHD1N4004S/-1
VHDDS1SS133-1
VHDDS1SS133-1
VHP304VT2H3-1
VHPSDPB50CD-1
VHEMA8033//-1
VHEDZ5R1BSB-1
VHEDZ6R2BSA-1
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AB
AB
AB
AB
AB
AL
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
AC
AK
AC
AC
AB
Silicon,KDS184
Silicon,DS1SS133
Silicon,DS1SS133
Silicon,DS1SS133
Silicon,DS1SS133
Silicon,D10XB60F
Silicon,1N4004S
Silicon,1N4004S
Silicon,DS1SS133
Silicon,1N4004S
Silicon,DS1SS133
Silicon,DS1SS133
Silicon,DS1SS133
Silicon,DS1SS133
Silicon,1N4004S
Silicon,DS1SS133
Silicon,DS1SS133
LED,Red,304VT2H3
LED,Blue,SDPB50CD
Zener,3.3V,MA8033
Zener,5.1V,DZ5.1BSB
Zener,6.2V,DZ6.2BSA
DIODES
D1
D301,302
D305
D690,691
D709~716
D801,802
D803~806
D842~845
1 D846
D853
D856
D860~863
D885
D905~907
D909,910
D911~914
DAP1
LED701
LED703
ZD1
ZD351
ZD801
NO.
PRICE
RANK
PARTS CODE
DESCRIPTION
VHEDZ7R5BSB-1
VHEDZ300BSB-1
VHEDZ120BSB-1
VHEDZ120BSB-1
J
J
J
J
AB
AB
AB
AB
Zener,7.5V,DZ7.5BSB
Zener,30V,DZ30BSB
Zener,12V,DZ12BSB
Zener,12V,DZ12BSB
RFILR0008AWZZ
RFILF0124AFZZ
RFILF0003AWZZ
RFILA0009AWZZ
J
J
J
J
AE
AD
AK
AE
Band Pass Filter
FM IF,10.7 MHz
FM IF
AM IF
RTRNP0521AWZZ
RTRNP0483AWZZ
RCILB0065AWZZ
RCILI0017AWZZ
RCILA0052AWZZ
RCILB0067AWZZ
RCILI0019AWZZ
J
J
J
J
J
J
J
BL
AL
AC
AB
AE
AD
AD
Power,Main
Power,Sub
FM OSC.
FM IF
AM Antenna
AM OSC.
AM IF
RCILC0011AWZZ
RCILC0012AWZZ
VP-MK331K0000
RCILR0056AWZZ
VP-DH101K0000
VP-DH101K0000
RCILZ0024AWZZ
RCILZ0137AFZZ
J
J
J
J
J
J
J
J
AD
AD
AB
AB
AB
AB
AC
AA
0.82 µH
2.2 µH
330 µH,Choke
FM RF
100 µH,Choke
100 µH,Choke
3 µH,Choke
0.29 µH
FILTERS
BF301
CF303
CF351
CF352
TRANSFORMERS
1 PT801
1 PT841
T301
T302
T303
T306
T351
COILS
L1
L2,3
L103
L312
L351,352
L701
L901,902
L920,921
VARIABLE CAPACITORS
VD301
VD302,303
VHCSVC347S/-1
VHCSVC230C/-1
J
J
AG Variable Capacitance,SVC347S
AD Variable Capacitance,SVC230C
J
J
J
J
J
AF
AF
AE
AB
AH
Crystal,456 kHz
Crystal,4.5 MHz
Ceramic,16.9344 MHz
Ceramic,4.19 MHz
Crystal,4.19 MHz
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AB
AA
AB
AA
AA
AA
AA
AD
AB
AB
AA
AB
AB
AB
AB
AC
AB
AB
AA
AB
AA
AA
AA
AB
AA
AB
AA
AA
AB
AB
AA
47 µF,25V,Electrolytic
0.01 µF,16V
47 µF,25V,Electrolytic
0.001 µF,50V
0.047 µF,16V
0.01 µF,16V
0.0027 µF,50V
3.3 µF,16V,Electrolytic
0.1 µF,16V
0.056 µF,16V
100 pF (CH),50V
0.022 µF,25V
47 µF,10V,Electrolytic
0.022 µF,25V
100 µF,10V,Electrolytic
330 µF,6.3V,Electrolytic
10 µF,25V,Electrolytic
0.0015 µF,50V,Mylar
0.01 µF,16V
0.022 µF,25V
100 pF (CH),50V
0.001 µF,50V
100 pF (CH),50V
0.022 µF,25V
100 pF (CH),50V
0.056 µF,16V
0.01 µF,16V
0.047 µF,16V
0.22 µF,16V
0.1 µF,16V
0.01 µF,16V
VIBRATORS
X351
X352
XL1
XL2
XL701
92LCRSTL1425A
RCRSP0019AWZZ
RCRM-0047AWZZ
RCRM-0043AWZZ
RCRSP0003AWZZ
CAPACITORS
C1
C2
C3
C4
C5
C6
C8
C9
C10
C11
C12
C13
C14
C17
C18
C20
C21,22
C23,24
C25
C26
C27,28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
–1–
VCEAZA1EW476M
VCKYCY1CB103K
VCEAZA1EW476M
VCKYCY1HB102K
VCKYCY1CB473K
VCKYCY1CB103K
VCKYCY1HB272K
RC-EZ0004AWZZ
VCKYCY1CB104K
VCKYCY1CB563K
VCCCCY1HH101J
VCKYCY1EF223Z
VCEAZA1AW476M
VCKYCY1EF223Z
VCEAZA1AW107M
VCEAZA0JW337M
VCEAZA1EW106M
VCQYKA1HM152K
VCKYCY1CB103K
VCKYCY1EF223Z
VCCCCY1HH101J
VCKYCY1HB102K
VCCCCY1HH101J
VCKYCY1EF223Z
VCCCCY1HH101J
VCKYCY1CB563K
VCKYCY1CB103K
VCKYCY1CB473K
VCKYCY1CF224Z
VCKYCY1CB104K
VCKYCY1CB103K
CD-MPS900/CD-MPS99
NO.
C39
C41
C42
C44
C46,47
C48
C50
C51~53
C56,57
C58
C59
C60
C61
C62
C63
C64
C65
C66
C68
C69
C70
C71
C72,73
C74
C75
C76
C82
C83
C84
C85,86
C101,102
C103
C104
C105,106
C107~110
C111,112
C113,114
C115,116
C117,118
C119,120
C121
C123,124
C125,126
C127,128
C129,130
C131,132
C133
C134
C135
C137
C138
C139
C140
C141
C143
C150
C302
C303
C304
C305
C306
C307
C308
C309
C310
C311
C312
C313
C315
C316
C317
C318
C320
C323
C324
C330
C331
C332
C334
C335
C338
C342
PART CODE
VCKYCY1CB104K
VCEAZA1AW107M
VCCCCY1HH330J
VCEAZA1AW107M
VCKYCY1CB103K
VCKYCY1EF223Z
VCEAZA1AW476M
VCKYCY1CB103K
VCEAZA1AW107M
VCEAZA1AW476M
VCKYCY1CB104K
VCKYCY1HB102K
VCEAZA1AW107M
VCKYCY1CB103K
VCEAZA1HW105M
VCCCCY1HH330J
VCEAZA1AW476M
VCKYCY1CB103K
VCKYCY1CB103K
VCEAZA1EW476M
VCKYCY1CB103K
VCKYCY1CB104K
VCCCCY1HH101J
VCKYCY1HB102K
VCKYCY1HB102K
VCKYCY1CB103K
VCKYCY1HB332K
VCKYCY1HB102K
VCKYCY1EF223Z
VCTYBT1EF223Z
VCKYCY1HB561K
VCKYBT1HB181K
VCCCCY1HH181J
VCKYCY1HB152K
VCKYCY1HB331K
VCEAZA1EW476M
VCTYPA1EX393K
VCKYCY1HB561K
VCEAZA1EW476M
VCKYCY1HB222K
VCKYCY1EF223Z
VCKYCY1HB271K
VCEAZA1HW226M
VCTYPA1CX223K
VCKYCY1HB332K
VCEAZA1EW476M
VCEAZA1EW226M
VCEAZA1AW227M
VCKYCY1EF223Z
VCQYKA1HM473K
VCQPKA2AA822J
VCQYKA1HM393K
VCEAZA1EW476M
VCEAZA1CW107M
VCEAZA1HW335M
VCEAZA1HW476M
VCKYCY1HB102K
VCCCCY1HH100D
VCKYCY1HB103K
VCCCCY1HH4R7C
VCKYCY1EF223Z
VCEAZA1HW106M
VCCCCY1HH4R7C
VCKYCY1HB102K
VCCCCY1HH150J
VCCCCY1HH180J
VCKYCY1EF223Z
VCCCCY1HH220J
VCKYCY1HB103K
VCKYCY1EF223Z
VCKYCY1HB102K
VCKYBT1HB101K
VCKYBT1HB102K
VCKYCY1EF223Z
VCCCCY1HH4R7C
VCCCCY1HH150J
VCKZPA1HF473Z
VCKYCY1EF223Z
VCCCCY1HH220J
VCKYCY1HB561K
VCKYCY1HB102K
VCKYCY1EF223Z
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
PRICE
RANK
DESCRIPTION
AB
AB
AA
AB
AA
AB
AB
AA
AB
AB
AB
AA
AB
AA
AB
AA
AB
AA
AA
AB
AA
AB
AA
AA
AA
AA
AA
AA
AB
AA
AA
AA
AA
AA
AA
AB
AA
AA
AB
AA
AB
AA
AB
AA
AA
AB
AB
AC
AB
AB
AA
AB
AB
AC
AB
AB
AA
AA
AA
AA
AB
AB
AA
AA
AA
AA
AB
AA
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
AA
AA
AA
AB
0.1 µF,16V
100 µF,10V,Electrolytic
33 pF (CH),50V
100 µF,10V,Electrolytic
0.01 µF,16V
0.022 µF,25V
47 µF,10V,Electrolytic
0.01 µF,16V
100 µF,10V,Electrolytic
47 µF,10V,Electrolytic
0.1 µF,16V
0.001 µF,50V
100 µF,10V,Electrolytic
0.01 µF,16V
1 µF,50V,Electrolytic
33 pF (CH),50V
47 µF,10V,Electrolytic
0.01 µF,16V
0.01 µF,16V
47 µF,25V,Electrolytic
0.01 µF,16V
0.1 µF,16V
100 pF (CH),50V
0.001 µF,50V
0.001 µF,50V
0.01 µF,16V
0.0033 µF,50V
0.001 µF,50V
0.022 µF,25V
0.022 µF,25V
560 pF,50V
180 pF,50V
180 pF (CH),50V
0.0015 µF,50V
330 pF,50V
47 µF,25V,Electrolytic
0.039 µF,25V
560 pF,50V
47 µF,25V,Electrolytic
0.0022 µF,50V
0.022 µF,25V
270 pF,50V
22 µF,50V,Electrolytic
0.022 µF,16V
0.0033 µF,50V
47 µF,25V,Electrolytic
22 µF,25V,Electrolytic
220 µF,10V,Electrolytic
0.022 µF,25V
0.047 µF,50V,Mylar
0.0082 µF,100V,Polypropylene
0.039 µF,50V,Mylar
47 µF,25V,Electrolytic
100 µF,16V,Electrolytic
3.3 µF,50V,Electrolytic
47 µF,50V,Electrolytic
0.001 µF,50V
10 pF (CH),50V
0.01 µF,50V
4.7 pF (CH),50V
0.022 µF,25V
10 µF,50V,Electrolytic
4.7 pF (CH),50V
0.001 µF,50V
15 pF (CH),50V
18 pF (CH),50V
0.022 µF,25V
22 pF (CH),50V
0.01 µF,50V
0.022 µF,25V
0.001 µF,50V
100 pF,50V
0.001 µF,50V
0.022 µF,25V
4.7 pF (CH),50V
15 pF (CH),50V
0.047 µF,50V
0.022 µF,25V
22 pF (CH),50V
560 pF,50V
0.001 µF,50V
0.022 µF,25V
NO.
–2–
C347
C350,351
C352
C353,354
C355
C356
C357
C358
C361
C362
C363
C364
C365
C366
C367,368
C369
C370~372
C373,374
C376~379
C380
C381
C382
C383
C384
C385
C386
C387
C388
C389
C391
C392
C393
C394
C395
C396
C397
C398
C399
C601
C602
C603
C605,606
C607,608
C609,610
C611,612
C613,614
C615,616
C617~624
C625,626
C631
C639
C640
C651~653
C690,691
C693
C694,695
C696
C701
C702
C704
C705
C707
C709,710
C714
C715
C717
C720,721
C723
C801
C802,803
C804
C805
C806~809
C810,811
C841
C842
C843
1 C844
C850
C854
C855
C856
PRICE
RANK
PARTS CODE
VCKYCY1EF223Z
VCKYCY1EF223Z
VCEAZA1HW106M
VCKYCY1EF223Z
VCCCCY1HH220J
VCKYCY1HB102K
VCEAZA1HW225M
VCEAZA1HW105M
VCKYCY1EF223Z
VCEAZA1HW335M
VCKYCY1EF223Z
VCEAZA1HW225M
VCTYPA1CX223K
VCKYCY1HB102K
VCEAZA1HW105M
VCCCCY1HH270J
VCEAZA1HW105M
VCTYPA1CX153K
VCCCCY1HH101J
VCEAZA1HW106M
VCCCCY1HH120J
VCCCCY1HH150J
VCCSBT1HL470J
VCKYCY1HB102K
VCKYCY1HB103K
VCKYCY1HB331K
VCKYCY1EF223Z
VCKYCY1HB102K
VCKYBT1HB102K
VCEAZA1EW476M
VCKYCY1HB102K
VCEAZA1HW105M
VCEAZA1EW476M
VCKYCY1EF223Z
VCEAZA1AW107M
VCKYCY1EF223Z
VCEAZA1AW107M
VCKYCY1EF223Z
VCEAZA1CW227M
VCKYPA1HF223Z
VCEAZA1AW227M
VCFYFA1HA104J
VCFYFA1HA823J
VCEAZA1HW105M
VCKYCY1HB222K
VCEAZA1HW105M
VCEAZA1HW475M
VCEAZA1HW105M
VCKYCY1HB222K
VCKYBT1HB103K
VCEAZA1HW105M
VCEAZA1HW226M
VCKYCY1HB221K
VCKYPA1HB391K
VCKYCY1HB103K
VCKYPA1HB102K
VCKYPA1HB103K
VCEAZA1HW105M
VCEAZA1AW227M
VCCCCY1HH150J
VCCCCY1HH180J
VCEAZA1HW105M
VCKYCY1HB473K
VCEAZA1HW335M
VCKYCY1HB103K
VCEAZA1EW476M
VCKYCY1EF223Z
VCKYCY1EF473Z
VCEAZA1VW107M
VCEAZA1HW476M
VCEAZA1JW227M
VCEAZA2AW226M
VCQYKA1HM104K
VCFYDA2AA224J
VCEAZA0JW108M
VCEAZA1VW477M
VCQYKA1HM473K
RC-KZ002LAWZZ
VCEAZW1EW478M
VCEAZA1EW227M
VCEAZA1HW106M
VCQYKA1HM104K
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AB
AB
AB
AB
AA
AA
AB
AB
AB
AB
AB
AB
AA
AA
AB
AA
AB
AA
AA
AB
AA
AA
AA
AA
AA
AA
AB
AA
AA
AB
AA
AB
AB
AB
AB
AB
AB
AB
AC
AB
AC
AC
AB
AB
AA
AB
AB
AB
AA
AB
AB
AB
AA
AA
AA
AA
AA
AB
AC
AA
AA
AB
AB
AB
AA
AB
AB
AB
AC
AB
AD
AC
AB
AD
AC
AD
AB
AC
AK
AC
AB
AB
DESCRIPTION
0.022 µF,25V
0.022 µF,25V
10 µF,50V,Electrolytic
0.022 µF,25V
22 pF (CH),50V
0.001 µF,50V
2.2 µF,50V,Electrolytic
1 µF,50V,Electrolytic
0.022 µF,25V
3.3 µF,50V,Electrolytic
0.022 µF,25V
2.2 µF,50V,Electrolytic
0.022 µF,16V
0.001 µF,50V
1 µF,50V,Electrolytic
27 pF (CH),50V
1 µF,50V,Electrolytic
0.015 µF,16V
100 pF (CH),50V
10 µF,50V,Electrolytic
12 pF (CH),50V
15 pF (CH),50V
47 pF,50V
0.001 µF,50V
0.01 µF,50V
330 pF,50V
0.022 µF,25V
0.001 µF,50V
0.001 µF,50V
47 µF,25V,Electrolytic
0.001 µF,50V
1 µF,50V,Electrolytic
47 µF,25V,Electrolytic
0.022 µF,25V
100 µF,10V,Electrolytic
0.022 µF,25V
100 µF,10V,Electrolytic
0.022 µF,25V
220 µF,16V,Electrolytic
0.022 µF,50V
220 µF,10V,Electrolytic
0.1 µF,50V,Thin Film
0.082 µF,50V
1 µF,50V,Electrolytic
0.0022 µF,50V
1 µF,50V,Electrolytic
4.7 µF,50V,Electrolytic
1 µF,50V,Electrolytic
0.0022 µF,50V
0.01 µF,50V
1 µF,50V,Electrolytic
22 µF,50V,Electrolytic
220 pF,50V
390 pF,50V
0.01 µF,50V
0.001 µF,50V
0.01 µF,50V
1 µF,50V,Electrolytic
220 µF,10V,Electrolytic
15 pF (CH),50V
18 pF (CH),50V
1 µF,50V,Electrolytic
0.047 µF,50V
3.3 µF,50V,Electrolytic
0.01 µF,50V
47 µF,25V,Electrolytic
0.022 µF,25V
0.047 µF,25V
100 µF,35V,Electrolytic
47 µF,50V,Electrolytic
220 µF,63V,Electrolytic
22 µF,100V,Electrolytic
0.1 µF,50V,Mylar
0.22 µF,100V,Thin Film
1000 µF,6.3V,Electrolytic
470 µF,35V,Electrolytic
0.047 µF,50V,Mylar
0.0047 µF,250V,Ceramic
4700 µF,25V,Electrolytic
220 µF,25V,Electrolytic
10 µF,50V,Electrolytic
0.1 µF,50V,Mylar
CD-MPS900/CD-MPS99
NO.
C859
C861
C864,865
C885
C901,902
C903,904
C905,906
C907
C908
C909
C910
C911,912
C913
C914,915
C916
C917
C918
C919
C920
C921,922
C923
C925
C928,929
C931
C944
C946
C952
PRICE
RANK
PART CODE
VCEAZA1HW226M
VCKYPA1HF223Z
VCEAZA1EW226M
VCKYCY1HB104K
VCEAZA1HW475M
VCKYCY1HB102K
VCEAZA1HW476M
VCCCCY1HH101J
VCCCCY1HH3R0C
VCQYKA1HM104K
VCCCCY1HH3R0C
VCEAZA2AW107M
VCCCCY1HH101J
VCEAZA2AW107M
VCEAZA1HW107M
VCKYCY1HB103K
VCEAZA1HW107M
VCKYCY1HB103K
RC-EZ0124AWZZ
RC-EZ0065AWZZ
RC-EZ0124AWZZ
VCEAZA1HW476M
VCQYKA1HM104K
VCEAZA1HW106M
VCEAZA1EW476M
VCEAZA1HW104M
VCKYCY1HB103K
DESCRIPTION
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AB
AB
AB
AD
AB
AA
AB
AA
AA
AB
AA
AD
AA
AD
AC
AA
AC
AA
AR
AN
AR
AB
AB
AB
AB
AB
AA
22 µF,50V,Electrolytic
0.022 µF,50V
22 µF,25V,Electrolytic
0.1 µF,50V
4.7 µF,50V,Electrolytic
0.001 µF,50V
47 µF,50V,Electrolytic
100 pF (CH),50V
3 pF (CH),50V
0.1 µF,50V,Mylar
3 pF (CH),50V
100 µF,100V,Electrolytic
100 pF (CH),50V
100 µF,100V,Electrolytic
100 µF,50V,Electrolytic
0.01 µF,50V
100 µF,50V,Electrolytic
0.01 µF,50V
3900 µF,85V,Electrolytic
4700 µF,50V,Electrolytic
3900 µF,85V,Electrolytic
47 µF,50V,Electrolytic
0.1 µF,50V,Mylar
10 µF,50V,Electrolytic
47 µF,25V,Electrolytic
0.1 µF,50V,Electrolytic
0.01 µF,50V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
0 ohm,Jumper,0.8×1.55mm,Green
33 kohms,1/16W
33 kohms,1/16W
47 ohms,1/16W
2.2 kohms,1/16W
10 ohm,1/16W
4.7 kohms,1/16W
330 ohms,1/16W
8.2 kohms,1/16W
6.8 kohms,1/16W
4.7 kohms,1/16W
1 kohm,1/16W
4.7 kohms,1/16W
2.2 kohms,1/16W
10 kohm,1/16W
100 ohm,1/16W
220 ohms,1/16W
150 ohms,1/16W
390 ohms,1/16W
56 kohms,1/16W
680 ohms,1/16W
4.7 kohms,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
680 ohms,1/16W
4.7 kohms,1/16W
5.6 kohms,1/16W
6.8 kohms,1/16W
4.7 kohms,1/16W
10 kohm,1/16W
2.2 kohms,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
1 kohm,1/16W
100 kohm,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
1 kohm,1/16W
220 ohms,1/16W
1 kohm,1/16W
4.7 kohms,1/16W
82 ohms,1/16W
3.3 kohms,1/16W
2.2 kohms,1/16W
150 ohms,1/16W
RESISTORS
R3
R6
R7
R8
R9
R10
R12
R13
R14~16
R17
R18,19
R20~22
R23,24
R25,26
R27
R28
R29
R30~37
R38
R39
R40
R41~48
R49
R50
R52
R54
R55
R56
R57,58
R59
R60
R61
R62
R63
R64
R65
R66,67
R68
R69,70
R71
R72
R73
R74
R75
R76~78
R79
R80
R81
R82
R83
VRS-CY1JB000J
VRS-CY1JB333J
VRS-CY1JB333J
VRS-CY1JB470J
VRS-CY1JB222J
VRS-CY1JB100J
VRS-CY1JB472J
VRS-CY1JB331J
VRS-CY1JB822J
VRS-CY1JB682J
VRS-CY1JB472J
VRS-CY1JB102J
VRS-CY1JB472J
VRS-CY1JB222J
VRS-CY1JB103J
VRS-CY1JB101J
VRS-CY1JB221J
VRS-CY1JB151J
VRS-CY1JB391J
VRS-CY1JB563J
VRS-CY1JB681J
VRS-CY1JB472J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB681J
VRS-CY1JB472J
VRS-CY1JB562J
VRS-CY1JB682J
VRS-CY1JB472J
VRS-CY1JB103J
VRS-CY1JB222J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB102J
VRS-CY1JB104J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB102J
VRS-CY1JB221J
VRS-CY1JB102J
VRS-CY1JB472J
VRS-CY1JB820J
VRS-CY1JB332J
VRS-CY1JB222J
VRS-CY1JB151J
NO.
R84
R85
R86~89
R91,92
R93
R94,95
R96
R97
R98
R99
R101,102
R103,104
R105,106
R107,108
R109,110
R111
R112
R113,114
R115,116
R117,118
R119,120
R121,122
R123,124
R126,127
R128,129
R130,131
R132,133
R134,135
R136,137
R138,139
R140
R141
R142
R143
R144
R145
R146,147
R148
R149
R150
R158
R302
R309
R311
R313
R314
R316
R322
R323
R325
R336
R350
R351
R352
R353
R355
R356
R357
R358
R359
R360
R365
R372~374
R375
R376
R377
R378
R379
R380
R381
R382
R383
R384
R385
R386
R387
R388
R391,392
R393
R395
R573
R593
–3–
PRICE
RANK
PARTS CODE
VRS-CY1JB472J
VRS-CY1JB222J
VRS-CY1JB472J
VRS-CY1JB103J
VRS-CY1JB472J
VRD-ST2EE1R0J
VRS-CY1JB472J
VRS-CY1JB473J
VRS-CY1JB391J
VRS-CY1JB225J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB332J
VRS-CY1JB473J
VRS-CY1JB472J
VRD-ST2CD153J
VRS-CY1JB153J
VRD-ST2CD102J
VRD-ST2CD560J
VRS-CY1JB104J
VRS-CY1JB392J
VRS-CY1JB273J
VRS-CY1JB682J
VRS-CY1JB472J
VRS-CY1JB562J
VRS-CY1JB152J
VRS-CY1JB101J
VRS-CY1JB103J
VRS-CY1JB224J
VRS-CY1JB103J
VRS-CY1JB473J
VRS-CY1JB472J
VRD-RT2HD820J
VRS-CY1JB473J
VRS-CY1JB223J
VRD-ST2CD4R7J
VRS-CY1JB103J
VRS-CY1JB472J
VRD-ST2EE151J
VRS-CY1JB683J
VRD-ST2EE221J
VRS-CY1JB100J
VRD-ST2CD103J
VRS-CY1JB104J
VRS-CY1JB333J
VRD-ST2CD220J
VRS-CY1JB472J
VRS-CY1JB681J
VRS-CY1JB683J
VRS-CY1JB473J
VRS-CY1JB103J
VRS-CY1JB272J
VRS-CY1JB562J
VRS-CY1JB102J
VRS-CY1JB271J
VRS-CY1JB332J
VRS-CY1JB102J
VRS-CY1JB474J
VRD-ST2CD392J
VRS-CY1JB182J
VRS-CY1JB472J
VRS-CY1JB103J
VRS-CY1JB102J
VRD-ST2CD471J
VRS-CY1JB102J
VRS-CY1JB473J
VRS-CY1JB102J
VRS-CY1JB222J
VRS-CY1JB152J
VRS-CY1JB103J
VRD-ST2EE151J
VRS-CY1JB562J
VRD-ST2CD562J
VRS-CY1JB562J
VRD-ST2CD223J
VRD-ST2CD562J
VRS-CY1JB392J
VRD-ST2EE271J
VRD-ST2CD102J
VRS-CY1JB473J
VRD-ST2CD103J
VRS-CY1JB103J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
DESCRIPTION
4.7 kohms,1/16W
2.2 kohms,1/16W
4.7 kohms,1/16W
10 kohm,1/16W
4.7 kohms,1/16W
1 ohm,1/4W
4.7 kohms,1/16W
47 kohms,1/16W
390 ohms,1/16W
2.2 Mohms,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
3.3 kohms,1/16W
47 kohms,1/16W
4.7 kohms,1/16W
15 kohms,1/6W
15 kohms,1/16W
1 kohm,1/6W
56 ohms,1/6W
100 kohm,1/16W
3.9 kohms,1/16W
27 kohms,1/16W
6.8 kohms,1/16W
4.7 kohms,1/16W
5.6 kohms,1/16W
1.5 kohms,1/16W
100 ohm,1/16W
10 kohm,1/16W
220 kohms,1/16W
10 kohm,1/16W
47 kohms,1/16W
4.7 kohms,1/16W
82 ohms,1/2W
47 kohms,1/16W
22 kohms,1/16W
4.7 ohms,1/6W
10 kohm,1/16W
4.7 kohms,1/16W
150 ohms,1/4W
68 kohms,1/16W
220 ohms,1/4W
10 ohm,1/16W
10 kohm,1/6W
100 kohm,1/16W
33 kohms,1/16W
22 ohms,1/6W
4.7 kohms,1/16W
680 ohms,1/16W
68 kohms,1/16W
47 kohms,1/16W
10 kohm,1/16W
2.7 kohms,1/16W
5.6 kohms,1/16W
1 kohm,1/16W
270 ohms,1/16W
3.3 kohms,1/16W
1 kohm,1/16W
470 kohms,1/16W
3.9 kohms,1/6W
1.8 kohms,1/16W
4.7 kohms,1/16W
10 kohm,1/16W
1 kohm,1/16W
470 ohms,1/6W
1 kohm,1/16W
47 kohms,1/16W
1 kohm,1/16W
2.2 kohms,1/16W
1.5 kohms,1/16W
10 kohm,1/16W
150 ohms,1/4W
5.6 kohms,1/16W
5.6 kohms,1/6W
5.6 kohms,1/16W
22 kohms,1/6W
5.6 kohms,1/6W
3.9 kohms,1/16W
270 ohms,1/4W
1 kohm,1/6W
47 kohms,1/16W
10 kohm,1/6W
10 kohm,1/16W
CD-MPS900/CD-MPS99
NO.
R601~603
R604,605
R606,607
R608,609
R610,611
R612,613
R614,615
R616,617
R618
R619
R620,621
R641
R642
R643,644
R690,691
R692,693
R701~703
R704,705
R706
R707~712
R713~716
R717
R718~722
R723
R724
R725
R726
R727,728
R729
R730
R731
R732,733
R736
R739
R740
R741
R745
R746
R750
R751
R759
R761,762
R763
R766~768
R769
R770
R771
R773
R775,776
R777~779
R780
R781
R782
R783
R784
R785
R786
R787
R788,789
R790
R791
R794,795
R801
R802
R803
R804,805
R806
R808
R841
R842
R843
R844
R853
R854
R857
R858
R859
R863
R864
R885
R886,887
R888,889
PRICE
RANK
PART CODE
VRD-ST2CD102J
VRS-CY1JB103J
VRS-CY1JB392J
VRS-CY1JB272J
VRS-CY1JB222J
VRS-CY1JB391J
VRS-CY1JB472J
VRS-CY1JB222J
VRD-ST2CD331J
VRS-CY1JB331J
VRS-CY1JB223J
VRS-CY1JB562J
VRD-ST2CD562J
VRS-CY1JB682J
VRD-ST2CD682J
VRD-ST2CD333J
VRS-CY1JB102J
VRD-ST2CD102J
VRS-CY1JB102J
VRD-ST2CD102J
VRS-CY1JB102J
VRD-ST2CD102J
VRS-CY1JB102J
VRD-ST2CD102J
VRS-CY1JB102J
VRD-ST2CD102J
VRS-CY1JB222J
VRS-CY1JB681J
VRD-ST2CD561J
VRD-ST2CD102J
VRS-CY1JB103J
VRS-CY1JB102J
VRS-CY1JB102J
VRD-ST2CD102J
VRD-ST2CD101J
VRD-ST2CD102J
VRD-ST2CD103J
VRD-ST2CD102J
VRD-ST2CD473J
VRD-ST2CD331J
VRD-ST2CD562J
VRS-CY1JB103J
VRS-CY1JB102J
VRS-CY1JB103J
VRD-ST2CD102J
VRS-CY1JB562J
VRD-ST2CD472J
VRS-CY1JB103J
VRS-CY1JB472J
VRS-CY1JB103J
VRD-ST2CD103J
VRS-CY1JB473J
VRD-ST2CD104J
VRS-CY1JB101J
VRS-CY1JB102J
VRS-CY1JB272J
VRS-CY1JB472J
VRD-ST2CD472J
VRD-ST2CD103J
VRS-CY1JB822J
VRS-CY1JB103J
VRD-ST2EE1R5J
VRD-ST2CD104J
VRD-ST2CD473J
VRD-ST2CD123J
VRD-ST2EE470J
VRD-ST2CD473J
VRD-RT2HD222J
VRD-ST2CD224J
VRD-ST2CD102J
VRD-ST2CD473J
VRD-ST2EE820J
VRD-ST2CD223J
VRD-ST2CD332J
VRD-ST2CD223J
VRD-ST2CD221J
VRD-ST2CD103J
VRD-RT2HD3R3J
VRD-ST2CD223J
VRS-CY1JB681J
VRS-CY1JB223J
VRD-ST2CD473J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
DESCRIPTION
NO.
1 R890
R891
R901,902
R903,904
R905,906
R907
R908
R909
R910
R911
1 R912
R913
R916
R917
R918
R919,920
R921
R922
R925,926
R927,928
R929,930
R934,935
R937
R938~941
R942,943
R944,945
R946
R947
R949
R950
R951
R956
R957
1 R958
R959
R983
R984
R985,986
R987,988
RD01
RD02
RD03
RD04
RD05
RD06
RD11
RD12
RD13
RD14
RD15
RD16
RD17
RD18
RD19
RD20
RD21
RD23
RD24
RD25
RD26
RD27
RD28
RD29
RD30
RD31
RD32
RM1,2
1 kohm,1/6W
10 kohm,1/16W
3.9 kohms,1/16W
2.7 kohms,1/16W
2.2 kohms,1/16W
390 ohms,1/16W
4.7 kohms,1/16W
2.2 kohms,1/16W
330 ohms,1/6W
330 ohms,1/16W
22 kohms,1/16W
5.6 kohms,1/16W
5.6 kohms,1/6W
6.8 kohms,1/16W
6.8 kohms,1/6W
33 kohms,1/6W
1 kohm,1/16W
1 kohm,1/6W
1 kohm,1/16W
1 kohm,1/6W
1 kohm,1/16W
1 kohm,1/6W
1 kohm,1/16W
1 kohm,1/6W
1 kohm,1/16W
1 kohm,1/6W
2.2 kohms,1/16W
680 ohms,1/16W
560 ohms,1/6W
1 kohm,1/6W
10 kohm,1/16W
1 kohm,1/16W
1 kohm,1/16W
1 kohm,1/6W
100 ohm,1/6W
1 kohm,1/6W
10 kohm,1/6W
1 kohm,1/6W
47 kohms,1/6W
330 ohms,1/6W
5.6 kohms,1/6W
10 kohm,1/16W
1 kohm,1/16W
10 kohm,1/16W
1 kohm,1/6W
5.6 kohms,1/16W
4.7 kohms,1/6W
10 kohm,1/16W
4.7 kohms,1/16W
10 kohm,1/16W
10 kohm,1/6W
47 kohms,1/16W
100 kohm,1/6W
100 ohm,1/16W
1 kohm,1/16W
2.7 kohms,1/16W
4.7 kohms,1/16W
4.7 kohms,1/6W
10 kohm,1/6W
8.2 kohms,1/16W
10 kohm,1/16W
1.5 ohms,1/4W
100 kohm,1/6W
47 kohms,1/6W
12 kohms,1/6W
47 ohms,1/4W
47 kohms,1/6W
2.2 kohms,1/2W
220 kohms,1/6W
1 kohm,1/6W
47 kohms,1/6W
82 ohms,1/4W
22 kohms,1/6W
3.3 kohms,1/6W
22 kohms,1/6W
220 ohms,1/6W
10 kohm,1/6W
3.3 ohms,1/2W
22 kohms,1/6W
680 ohms,1/16W
22 kohms,1/16W
47 kohms,1/6W
PRICE
RANK
PARTS CODE
RR-HZ0001AWZZ
VRD-ST2EE101J
VRS-CY1JB563J
VRS-CY1JB102J
VRS-CY1JB561J
VRS-CY1JB563J
VRS-CY1JB102J
VRS-CY1JB333J
VRD-ST2CD102J
VRS-CY1JB563J
VRG-ST2EC101J
VRN-CM05NR22J
VRN-CM05NR22J
VRN-CM05N0R1J
VRD-ST2CD222J
VRS-CY1JB152J
VRD-ST2CD222J
VRN-CM05N0R1J
VRD-RT2HD152J
VRD-ST2EE393J
VRD-ST2EE473J
VRD-ST2CD563J
VRS-CY1JB563J
VRD-RT2HD100J
VRS-VV3DA821J
VRD-ST2CD152J
VRS-CY1JB473J
VRS-CY1JB153J
VRD-RT2HD102J
VRD-ST2CD683J
VRD-RT2HD102J
VRS-CY1JB102J
VRS-CY1JB472J
VRG-ST2EC101J
VRS-CY1JB221J
VRS-CY1JB333J
VRS-CY1JB152J
VRS-CY1JB562J
VRS-CY1JB222J
VRD-ST2CD681J
VRS-CY1JB821J
VRS-CY1JB102J
VRD-ST2CD152J
VRS-CY1JB222J
VRS-CY1JB272J
VRS-CY1JB681J
VRS-CY1JB821J
VRD-ST2CD102J
VRS-CY1JB152J
VRS-CY1JB222J
VRS-CY1JB272J
VRS-CY1JB392J
VRS-CY1JB562J
VRS-CY1JB103J
VRS-CY1JB153J
VRS-CY1JB333J
VRD-ST2CD681J
VRD-ST2CD821J
VRD-ST2CD102J
VRS-CY1JB152J
VRS-CY1JB222J
VRS-CY1JB272J
VRS-CY1JB392J
VRS-CY1JB562J
VRS-CY1JB103J
VRS-CY1JB153J
VRS-CY1JB103J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
DESCRIPTION
AE
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AD
AD
AD
AA
AA
AA
AD
AA
AA
AA
AA
AA
AA
AC
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
4.7 Mohms,1/2W
100 ohm,1/4W
56 kohms,1/16W
1 kohm,1/16W
560 ohms,1/16W
56 kohms,1/16W
1 kohm,1/16W
33 kohms,1/16W
1 kohm,1/6W
56 kohms,1/16W
100 ohm,1/4W,Fusible
0.22 ohms,5W
0.22 ohms,5W
0.1 ohm,5W
2.2 kohms,1/6W
1.5 kohms,1/16W
2.2 kohms,1/6W
0.1 ohm,5W
1.5 kohms,1/2W
39 kohms,1/4W
47 kohms,1/4W
56 kohms,1/6W
56 kohms,1/16W
10 ohm,1/2W
820 ohms,2W
1.5 kohms,1/6W
47 kohms,1/16W
15 kohms,1/16W
1 kohm,1/2W
68 kohms,1/6W
1 kohm,1/2W
1 kohm,1/16W
4.7 kohms,1/16W
100 ohm,1/4W,Fusible
220 ohms,1/16W
33 kohms,1/16W
1.5 kohms,1/16W
5.6 kohms,1/16W
2.2 kohms,1/16W
680 ohms,1/6W
820 ohms,1/16W
1 kohm,1/16W
1.5 kohms,1/6W
2.2 kohms,1/16W
2.7 kohms,1/16W
680 ohms,1/16W
820 ohms,1/16W
1 kohm,1/6W
1.5 kohms,1/16W
2.2 kohms,1/16W
2.7 kohms,1/16W
3.9 kohms,1/16W
5.6 kohms,1/16W
10 kohm,1/16W
15 kohms,1/16W
33 kohms,1/16W
680 ohms,1/6W
820 ohms,1/6W
1 kohm,1/6W
1.5 kohms,1/16W
2.2 kohms,1/16W
2.7 kohms,1/16W
3.9 kohms,1/16W
5.6 kohms,1/16W
10 kohm,1/16W
15 kohms,1/16W
10 kohm,1/16W
AG
AK
AH
AD
AC
AC
AC
AC
AD
AC
AC
Connector Ass’y,9/8Pin
Connector Ass’y,6/5Pin
Connector Ass’y,11/10Pin
Socket,16Pin
Plug,8Pin
Plug,6Pin
Plug,6Pin
Plug,7Pin
Socket,16Pin
Socket,11Pin
Socket,11Pin
OTHER CIRCUITRY PARTS
BI601/CNS601
BI603/CNS603
BI801/CNS801
CNP1
CNP2
CNP3
CNP3A
CNP4
CNP5
CNP6
CNP6A
–4–
QCNWN2715AWPZ J
QCNWN2714AWPZ J
QCNWN2713AWPZ J
QCNCWYP16AWZZ J
92LCONE8P53254 J
92LCONE6P53253 J
92LCONE6P53254 J
92LCONE7P53253 J
QCNCWZY16AWZZ J
QCNCWZX11AWZZ J
QCNCWZO11AWZZ J
CD-MPS900/CD-MPS99
NO.
CNP101
CNP102
CNP301
CNP602
CNP701A
CNP701B
CNP702A
CNP704
CNP801
CNP802
CNP901
CNP971
CNPAP1
CNPAP2
CNS3A/B
CNS971
1 F801,802
1 F803,804
1 F805
FFC1
FFC4
FFC701
FFC702
FFC704
FJ1
FL701
FW705
FW901
JK690
JK691
JK692
JOG701
LG1~4
M1
M2
M901
NM1
NM2
NSW1
1 RL841
RL914
RX1
RX701
SO302
SO902
SW1
SW2
SW3
SW4
SW701
PRICE
RANK
PART CODE
QCNCM705CAFZZ
QCNCM705GAFZZ
92LCONE2P5268
92LCONE5P53253
QCNCWZY16AWZZ
QCNCWZX16AWZZ
QCNCWZY07AWZZ
QCNCWZY16AWZZ
92LCONEAP5267X
QCNCW012FAWZZ
QCNCW012EAWZZ
92LCONE2P53253
92LCONE2P53253
92LCONE3P53253
QCNWNA087AWPZ
QCNWNA080AWPZ
QFS-D502BSJNI
QFS-D202BSJNI
QFS-D602BSJNI
QCNWN2700AWPZ
QCNWN2701AWPZ
QCNWN2716AWPZ
QCNWN2495AWZZ
QCNWN2718AWPZ
RCORFA001AWZZ
VVKNA12MM44-1
QCNWN2712AWPZ
QCNWN2711AWPZ
QSOCJ0313AWZZ
QSOCJ0120AWZZ
QJAKM0004AWZZ
QSW-ZA001AWZZ
QLUGP0001AWZZ
92LMTR5529AASY
92LMTR5529AASY
RMOTV0059AWZZ
92LMTR5515CASY
92LMTR1854BASY
QSW-F9001AW01
RRLYD0018AWZZ
RRLYD0016AWZZ
VHPGP1S094HCZ
VHLPIC3704/-1
QTANC0206AWZZ
QTANA0424AWZZ
QSW-P9003AWZZ
QSW-P9003AWZZ
QSW-P9003AWZZ
QSW-P9006AWZZ
92LSWICH1401AT
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AA
AB
AB
AB
AD
AD
AC
AD
AC
AC
AC
AB
AB
AB
AF
AC
AE
AB
AD
AE
AD
AF
AD
AF
AB
AX
AD
AD
AF
AD
AK
AE
AC
AD
AD
AL
AS
AP
AD
AH
AH
AF
AG
AD
AE
AD
AD
AD
AF
AC
SW702
SW703
SW704
SW705
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
J
J
J
J
AC
AC
AC
AC
SW706
SW707
92LSWICH1401AT J
92LSWICH1401AT J
AC
AC
SW712
SW713
SW714
SW715
SW716
SW717
SW718
SW719
SW720
SW721
SW722
SW723
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
J
J
J
J
J
J
J
J
J
J
J
J
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
SW725
SW726
SW727
SW728
SW729
SW730
SW731
SW732
SW733
SW734
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
92LSWICH1401AT
J
J
J
J
J
J
J
J
J
J
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
DESCRIPTION
Plug,3Pin
Plug,7Pin
Plug,2Pin
Plug,5Pin
Socket,16Pin
Socket,16Pin
Socket,7Pin
Socket,16Pin
Plug,10Pin
Plug,6Pin
Socket,5Pin
Plug,2Pin
Plug,2Pin
Plug,3Pin
Connector Ass’y,6/6Pin
Connector Ass’y,2Pin
Fuse,5A/125V
Fuse,2A/125V
Fuse,6A/125V
Flat Cable,16Pin
Flat Cable,11Pin
Flat Cable,16Pin
Flat Cable,7Pin
Flat Cable,16Pin
Core
FL Display
Flat Wire,6Pin
Flat Wire,5Pin
Jack,Game Input
Jack,Video Out
Jack,Headphones
Switch,Jog Type [Volume]
Lug Terminal
Motor with Gear [Tray]
Motor with Gear [Main Cam]
Motor Air Cooling,Fan
Motor with Chassis [Spindle]
Motor with Gear [Sled]
Switch,Push Type [Pickup In]
Relay
Relay
Photo Interrupter,GP1S094HCZ
Remote Sensor,PIC3704
Terminal,FM Antenna
Terminal,Speaker
Switch,Push Type [Clamp]
Switch,Push Type [Tray SW1]
Switch,Push Type [Tray SW2]
Switch,Push Type [Disc]
Switch,Key Type
[Power On/Stand-by]
Switch,Key Type [Clock/Timer]
Switch,Key Type [Tuning Up]
Switch,Key Type [Tuning Down]
Switch,Key Type
[Fast Rewind/Preset Down]
Switch,Key Type [Equalizer]
Switch,Key Type
[Fast Forward/Preset Up]
Switch,Key Type [Tuner (Band)]
Switch,Key Type [CD]
Switch,Key Type [Tape]
Switch,Key Type [Game/Video]
Switch,Key Type [X-Bass/Demo]
Switch,Key Type [Left]
Switch,Key Type [Up]
Switch,Key Type [Character]
Switch,Key Type [Right]
Switch,Key Type [Enter]
Switch,Key Type [Down]
Switch,Key Type
[MP3 Navigation]
Switch,Key Type [Play/Repeat]
Switch,Key Type [Stop]
Switch,Key Type [Rec/Pause]
Switch,Key Type [Memory/Set]
Switch,Key Type [Open/Close]
Switch,Key Type [Direct Play]
Switch,Key Type [Disc2]
Switch,Key Type [Disc4]
Switch,Key Type [Disc5]
Switch,Key Type [Disc3]
NO.
SW735
WTM705
WTM901
PRICE
RANK
PARTS CODE
92LSWICH1401AT J
QCNCW019FAWZZ J
QCNCW019EAWZZ J
DESCRIPTION
AC Switch,Key Type [Disc1]
AB Socket,6Pin
AB Socket,5Pin
CD MECHANISM PARTS
301
302
304
305
1 306
306- 1
NGERH0011AWZZ
NGERH0012AWZZ
NSFTM0020AWFW
92LMCUSN1524A
92LHPC1LFASY
————
J
J
J
J
J
AC
AC
AD
AD
BB
––
306- 2
306- 3
307
308
701
703
704
NM1
NM2
NSW1
NGERR0043AFZZ
MSPRC0961AFZZ
PCUSG0001AWSA
PCUSG0004AWSA
XBSSD26P06000
XBBSD20P03000
LX-WZ1070AFZZ
92LMTR5515CASY
92LMTR1854BASY
QSW-F9001AW01
J
J
J
J
J
J
J
J
J
J
AC
AA
AD
AD
AA
AA
AA
AS
AP
AD
Gear,Middle
Gear,Drive
Shaft,Guide
Cushion
Pickup Unit Ass’y
Pickup Unit
(Not Replacement Item)
Gear,Rack
Spring,Rack
Cushion
Cushion
Screw,ø2.6×6mm
Screw,ø2×3mm
Washer,ø1.5×ø3.8×0.25mm
Motor with Chassis [Spindle]
Motor with Gear [Sled]
Switch,Push Type [Pickup In]
CHANGER MECHANISM PARTS
101
102
103
104
105
106
107
108
109
109- 1
109- 2
109- 3
109- 4
109- 5
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
–5–
GCOVA1513AWZZ
GCOVA1514AWZZ
LANGG0008AWZZ
LANGG0009AWZZ
LCHSM0194AWZZ
LHLDZ9017AWZZ
LPLTP0014AWZZ
LPLTP0015AWZZ
MHOLD5529ASY
LHLDM9001AWZZ
LHLDZ9019AWM1
LPLTM0017AWZZ
LPLTMA001AWFW
PMAGF0003AWZZ
MLEVP0129AWZZ
MLEVP0130AWZZ
MLEVP0131AWZZ
MLEVP0132AWZZ
MLEVP0133AWZZ
MLEVP0134AWZZ
MLEVP0135AWZZ
MLEVP0136AWZZ
MLEVP0137AWZZ
MLEVP0138AWZZ
MLEVP0139AWZZ
MSPRC0044AWFJ
MSPRD0191AWFJ
MSPRD0192AWFJ
NGERH0176AWZZ
NGERH0177AWZZ
NGERH0178AWZZ
NGERH0179AWZZ
NGERH0180AWZZ
NGERH0181AWZZ
NGERH0182AWZZ
NGERH0183AWZZ
NGERH0184AWZZ
NGERH0185AWZZ
NGERH0186AWZZ
NGERH0187AWZZ
NGERH0188AWZZ
NGERH0189AWZZ
NGERH0190AWZZ
NGERH0191AWZZ
NGERH0192AWZZ
NGERH0193AWZZ
NGERH0194AWZZ
NGERH0195AWZZ
NGERH0196AWZZ
NGERH0198AWZZ
NGERH0199AWZZ
NGERH0200AWZZ
NGERH0201AWZZ
NGERH0202AWZZ
NGERH0203AWZZ
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AF
AF
AD
AC
AP
AF
AK
AG
AP
AD
AK
AB
AC
AF
AC
AG
AD
AD
AC
AD
AC
AC
AC
AB
AC
AB
AC
AB
AF
AC
AC
AC
AB
AC
AC
AC
AC
AC
AC
AB
AC
AB
AC
AE
AC
AC
AB
AC
AC
AB
AB
AB
AB
AB
AB
Disc Tray
Guide Tray
Outer Tray Guide
Inner Tray Guide
Main Base
CD Mechanism Holder
Top Plate
Gear Plate
Up/Down Holder Ass’y
Stabilizer
Up/Down Holder Ass’y
Stabilizer Plate
Plate
Magnet
Tray Lock Lever
Gear Up/Down Board
Mechanism Up/Down Board (L)
Mechanism Up/Down Board (R)
Mechanism Clamp Board
L/R Joint Lver
Tray Set Lever
Mechanism Clamp Switch Lever
Mechanism Clamp Switch Arm
Inner GR Up/Down Lever
Outer GR Up/Down Lever
Shift Spring
Disc Stop Spring
Balance Spring
Tray Big Gear
Tray Front Gear A
Tray Front Gear B
Tray Rear Gear A
Tray Rear Gear B
Mechanism Clamp Gear A
Mechanism Clamp Joint Gear
Mechanism Clamp Board Gear
Tray Rear Joint Gear A
Tray Rear Joint Gear B
Tray Rear Joint Gear C
Tray Rear Drive Gear
Tray Drive Gear
Tray Front Drive Gear
Tray Front Joint Gear
Mode Big Gear
G-Up/Down Gear A
G-Up/Down Gear B
Mechanism Up/Down Gear A
Mechanism Up/Down Gear B
Mechanism Clamp Switch Gear
Reduction Gear A
Reduction Gear B
Reduction Gear C
Reduction Gear D
Up/Down Reduction Gear E
Up/Down Reduction Gear F
CD-MPS900/CD-MPS99
NO.
151
152
801
803
804
M1
M2
SW1
SW2
SW3
SW4
PRICE
RANK
DESCRIPTION
J
J
J
J
J
J
J
J
J
J
J
AB
AD
AB
AA
AA
AD
AD
AD
AD
AD
AF
Tray Reduction Gear E
Shaft,Main Base
Screw,Special
Screw,ø2×10mm
Screw,ø3×10mm
Motor with Gear [Tray]
Motor with Gear [Main Cam]
Switch,Push Type [CLAMP]
Switch,Push Type [TRAY SW1]
Switch,Push Type [TRAY SW2]
Switch,Push Type [DISC]
J
J
BE Front Panel Ass’y [CD-MPS99]
BE Front Panel Ass’y [CD-MPS900]
–– Front Panel
(Not Replacement Item)
AG Cover,Cassette [Tape 1]
[CD-MPS99]
AK Cover,Cassette [Tape 1]
[CD-MPS900]
AG Cover,Cassette [Tape 2]
[CD-MPS99]
AK Cover,Cassette [Tape 2]
[CD-MPS900]
AE Holder,Cassette [Tape 1]
AE Holder,Cassette [Tape 2]
AE Panel,Cassette [Tape 1]
AE Panel,Cassette [Tape 2]
AF Button,Disc Number
[CD-MPS99]
AE Button,Disc Number
[CD-MPS900]
AD Damper
AM Button,Operation A [CD-MPS99]
AM Button,Operation A
[CD-MPS900]
AM Button,Operation B [CD-MPS99]
AM Button,Operation B
[CD-MPS900]
AE Button,Function
AF Button,Memory [CD-MPS99]
AE Button,Memory [CD-MPS900]
AF Button,Tuning [CD-MPS99]
AE Button,Tuning [CD-MPS900]
AG Button,Power [CD-MPS99]
AF Button,Power [CD-MPS900]
AC Cover,Timer
AD Badge,SHARP
AB Spring,Cassette [Tape 1]
AB Spring,Cassette [Tape 2]
AH Volume Knob Ring,A
[CD-MPS900]
AG Volume Knob Ring,A
[CD-MPS99]
AF Volume Knob Ring,B
AH Decoration Plate,Amp.
[CD-MPS99]
AH Decoration Plate,Amp.
[CD-MPS900]
AC Lock,Cassette [Tape 1]
AC Lock,Cassette [Tape 2]
AB Spring,Cassette Lock [Tape 1]
AC Spring,Cassette Lock [Tape 2]
AH Button,MP3 Navigation,A
AE Button,MP3 Navigation,B
AD Lug Wire
AY Cabinet,Top/Side [CD-MPS99]
AY Cabinet,Top/Side [CD-MPS900]
AB Cushion,Leg
AL Rear Panel,B [CD-MPS99]
AL Rear Panel,B [CD-MPS900]
AG Cover,CD Tray
AM Chassis,Changer
AG Shield,Dust Cover
AA Nylon Band,80mm
BC Tape Mechanism Ass’y
Head Plate Block [Tape 2]
Motor with Pulley [Tape]
–– Tape Mechanism PWB Ass’y
PART CODE
NGERH0204AWZZ
NSFTT0084AWFD
LX-BZA006AWFD
XEBSD20P10000
XEBSD30P10000
92LMTR5529AASY
92LMTR5529AASY
QSW-P9003AWZZ
QSW-P9003AWZZ
QSW-P9003AWZZ
QSW-P9006AWZZ
CABINET PARTS
201
201
201- 1
CCABA5534AW01
CCABA5535AW01
————
201- 2
GCOVAA026AWSA J
201- 2
GCOVA1521AWSA J
201- 3
GCOVAA027AWSA J
201- 3
GCOVA1522AWSA J
201- 4
201- 5
201- 6
201- 7
201- 8
GDORF0127AWSA
GDORF0128AWSA
HDECQ1108AWSA
HDECQ1109AWSA
JKNBZA022AWSA
J
J
J
J
J
201- 8
JKNBZ0982AWSA
J
201- 9
201-10
201-10
MLIF-A001AWZZ
JKNBZA023AWSA
JKNBZA023AWSB
J
J
J
201-11
201-11
JKNBZA024AWSA
JKNBZA024AWSB
J
J
201-12
201-13
201-13
201-14
201-14
201-15
201-15
201-16
201-17
201-18
201-19
201-20
JKNBZ0985AWSA
JKNBZA026AWSA
JKNBZ0986AWSA
JKNBZA027AWSA
JKNBZ0987AWSA
JKNBZA030AWSA
JKNBZ0991AWSA
GCOVA1533AWSA
HBDGB1007AWSA
MSPRDA002AWFJ
MSPRDA003AWFJ
HDECQA039AWSA
J
J
J
J
J
J
J
J
J
J
J
J
201-20
HDECQ1105AWSA J
201-21
201-22
HDECQ1106AWSA J
HDECQA008AWSA J
201-22
HDECQ1116AWSA J
201-23
201-24
201-25
201-26
201-27
201-28
201-29
202
202
203
204
204
205
206
207
208
209
209- 1
209- 2
209- 3(PWB-D)
MLOKC0014AWZZ
MLOKC0015AWZZ
MSPRD0196AWFJ
MSPRD0197AWFJ
JKNBZ0988AWSA
JKNBZ0989AWSA
QCNWN1966AWZZ
GCAB-A006AWSA
GCAB-3101AWSA
PCUSG0022AWZZ
GITARA007AWSA
GITARA019AWSA
GCOVA1520AWSA
LCHSZ0025AWZZ
PSLDMA009AWFW
92LNBAND1318A
KMECBA001AWZZ
92PF513-905
92PF525-357
————
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
–6–
209- 4
209- 5
209- 6
209- 7
209- 8
209- 9
209-10
209-11
210
212
213
214
215
216
217
218
219
1 220
221
222
223
1 224
225
226
227
228
229
230
231
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
92PF522-063
92PF20D-12
92PF514-131
92PFF19S-52
92PFF20B-13
92PF522-061
92PFF19S-31
92PF513-906
HDECQ1110AWSA
QCNWN1860AWZZ
JKNBK0103AWSA
HDECQ1104AWSA
PSHEPA008AWZZ
92LCSPR1431C
LCHSM0201AWFW
GITAR1273AWSA
LBND-1011AWZZ
QACCD0022AWZZ
LBSHC0005AWZZ
NFANP0001AWZZ
LANGK0437AWFW
QFSHD0001AWZZ
PRDAR0320AWFW
LHLDZ9024AWZZ
LANGT0042AWFW
PSHEPA010AWZZ
LHLDZA004AWZZ
LANGK0435AWFW
PCOVQ7004AWFW
XJBSD30P10000
XEBSD30P10000
LX-EZ0005AWFD
XEBSD26P10000
XESSD30P10000
XJSSD30P08000
LX-EZ0010AWFD
XHBSD40P08000
XBBSD20P04000
LX-JZ0010AFFD
LX-LZA002AWZZ
LX-LZ0002AW00
LX-JZ0037AWFD
LX-JZ0044AWFF
XWHSD32-10080
XHBSD30P06000
LX-JZ0010AWFD
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
AZ
AG
AF
AC
AD
AL
AE
AA
AR
AP
AA
AM
AD
AD
AE
AB
AV
AD
AC
AE
AC
AF
AK
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AD
AC
AB
AB
AA
AA
AB
Clutc Ass’y Block [Tape 2]
Belt,Main [Tape 2]
Pinch Roller
Belt,FF/REW [Tape 1]
Belt,Main [Tape 1]
Clutc Ass’y Block [Tape 1]
Belt,FF/REW [Tape 2]
Head Plate Block [Tape 1]
Panel,Edge Light
Lug Wire
Knob,Volume
Cover,Volume Knob
Sheet,Edge Light
Spring,Ring
Chassis,Main
Rear Panel,A
Nylon Band
AC Power Supply Cord
Bushing,AC Power Supply Cord
Rotary Fan
Bracket,Fan Support A
Holder,Fuse
Heat Sink
Holder,Edge Light
Bracket,PWB Support
Shield Sheet,Main PWB
Holder,Rib Support
Bracket,Heat Sink Support
Cover,Fan
Screw,ø3×10mm
Screw,ø3×10mm
Screw,ø2.6×10mm
Screw,ø2.6×10mm
Screw,ø3×10mm
Screw,ø3×8mm
Screw,Special
Screw,ø4×8mm
Screw,ø2×4mm
Screw,ø3×10mm
Push Rivet
Snap Rivet
Screw,ø3×18mm
Screw,ø3×10mm
Washer,ø3.2×ø8×1mm
Screw,ø3×6mm
Screw,ø3×10mm
J
J
J
J
J
J
J
J
AG
AF
AD
AF
AA
AD
AU
AG
AM Loop Antenna
Operation Manual
Quick Guide
Label,Feature,Speaker
Energy Star Label (Set)
FM Antenna
Remote Control
Lid,Remote Control
AL
AL
AZ
ACCESSORIES
QANTL0005AWZZ
TINSEA012AWZZ
TINSZA010AWZZ
TLABZA028AWZZ
TLABZA092AWZZ
92LFANT1746A
RRMCG0395AWSA
GFTAT1017AWSA
P.W.B. ASSEMBLY (Not Replacement Item)
PWB-A1~3
1 PWB-B1,2
92LPWB5534MANS J
92LPWB5534PWRS J
PWB-C
92LPWB5612CDUS J
PWB-D(209-3)
————
PWB-E
QPWBF1055AWZZ J
PWB-F
QPWBF0027AWZZ J
––
Main/Display/Spacer
(Combined Ass’y)
–– Power/Game Input
(Combined Ass’y)
–– CD Servo
–– Tape Mechanism
AE 5-Changer Motor (PWB Only)
AD CD Motor (PWB Only)
OTHER SERVICE PART
UDSKA0004AFZZ
J
AZ
CD Pickup Lens Cleaner
CD-MPS900/CD-MPS99
NO.
PRICE
RANK
PART CODE
DESCRIPTION
CP-MPS900/CP-MPS99
SPEAKER BOX PARTS
901
GBOXLA009AWSA J
BF
901
GBOXLA010AWSA J
BE
902
GBOXRA009AWSA J
BF
902
GBOXRA010AWSA J
BE
903
CPNLSA005AW01
J
BD
903
CPNLSA005AW02
J
BD
904
CPNLSA006AW01
J
BD
904
CPNLSA006AW02
J
BD
905
905
906
906
907
HPNLSA007AWSA
HPNLSA007AWSB
HPNLSA008AWSA
HPNLSA008AWSB
TSPC-A038AWZZ
J
J
J
J
J
AX
AX
AX
AX
AC
907
908
909
TSPC-A039AWZZ J
PFLT-0046AWZZ
J
QCNWNA001AWZZ J
AC
AC
AY
910
911
912
913
914
915
SP1,2
SP3,4
SP5,6
SP7~10
XJBSD40P16000
XJBSD30P12000
XMPSF40P35000
XMBSF40P16000
PCUSG0147AWZZ
QCNWHA001AWZZ
RSP-ZA006AWZZ
RSP-ZA007AWZZ
RSP-ZA008AWZZ
LHLDZA006AWM1
AB
AA
AC
AC
AC
AK
BC
AS
AS
AS
J
J
J
J
J
J
J
J
J
J
Speaker Box Ass’y,Left
[CP-MPS900]
Speaker Box Ass’y,Left
[CP-MPS99]
Speaker Box Ass’y,Right
[CP-MPS900]
Speaker Box Ass’y,Right
[CP-MPS99]
Front Panel Ass’y,Left
[CP-MPS900]
Front Panel Ass’y,Left
[CP-MPS99]
Front Panel Ass’y,Right
[CP-MPS900]
Front Panel Ass’y,Right
[CP-MPS99]
Side Panel,Left [CP-MPS900]
Side Panel,Left [CP-MPS99]
Side Panel,Right [CP-MPS900]
Side Panel,Right [CP-MPS99]
Label,Specifications
[CP-MPS900]
Label,Specifications [CP-MPS99]
Felt
Speaker Cord Ass’y
(with Capacitor C1,2)
Screw,ø4×16mm
Screw,ø3×12mm
Screw,ø4×35mm
Screw,ø4×16mm
Leg Cushion
Speaker Cord
Woofer
Tweeter
Passive Radiator
Super Tweeter Ass’y
–7–
CD-MPS900/CD-MPS99
CD-MPS900/CD-MPS99
306-2
A
306
306-1
701
306-3
704
B
304
701
C
302
301
703x2
D
E
NM1
F
307
NM2
308
305x2
G
NSW1
H
PWB-F
1
2
3
4
Figure 8 CD MECHANISM EXPLODED VIEW
–8–
5
6
CD-MPS900/CD-MPS99
CD-MPS900/CD-MPS99
BELT CONNECTION
FF/REW
Tape
FF/REW
ROLLER
Motor
ROLLER
ASS'Y
ASS'Y
CHANGER
MECHANISM UNIT
A
601x5
202
FLYWHEEL
FLYWHEEL
ASS'Y
MAIN BELT ASS'Y
TAPE2
TAPE1
PWB-D
B
CD
MECHANISM
605x6 601x3
209-3
209-7
209-2
209-8
209-9
212
603x4
201-29
209-4
206
209-11
601x3
C
209-6
PWB-A2
602x3
209
209-5
209-10
209-1
604x10
601x2
204
616
231
616x2
602x4
PWB-C
207
602x2
226
205
D
EL701
205
215
601x9
M901
205
223
604x2
615
212
205
205
216
218
222
612
610
PWB-A1
PWB-A3
210
609x2
201-22
E
201-21
227
228
604
201-20
616x2
610
614x2
201-17
225
201
201-10
610
212
201-16
601x2
201-15
213
201-27
216
201-12
201-28
214
201-25
201-23
201-8
601x2
201-9
201-13
201-24
201-26
G
Silicon
Grease
201-29
607x2
201-14
F
616x2
604
230
IC901
IC851
617
230
220
221
613x2
608x4
PWB-B2
229
615 604
212
PWB-B1
201-4
201-2
201-1
201-9
PT801
201-11
611
217
224x10
201-18
203x2
201-5
201-6
201-19
208
219
201-3
201-7
H
606x2
203x2
Note: Only the unit and consumable parts are supplied as parts supply for the Tape mechanism.
1
2
3
4
Figure 9 CABINET EXPLODED VIEW
–9–
5
6
CD-MPS900/CD-MPS99
CD-MPS900/CD-MPS99
115
107
A
803x6
123
119
135
104
112
B
136
122
113
108
141
C
130
133
143
801x2 139
134
111
124
132
110
120
144
118
103
131
142
117
127
140
137
121
145
128
125
152
126
152
D
138
136
804
149
101
150
105
148
148
E
101
129
147
147
146
146
101
151
145
M1
M2
101
SW1
SW2
SW3
RX1
PWB-E
101
F
102
SW4
803x2
102
109-5
106
109-1
102
G
109
109-3
102
116
109-4
102
114
109-2
H
1
2
3
4
Figure 10 CHANGER MECHANISM EXPLODED VIEW
– 10 –
5
6
CD-MPS900/CD-MPS99
CP-MPS900/CP-MPS99
A
SP9, 10
SUPER TWEETER
SP9, 10
SUPER TWEETER
SP7, 8
SUPER TWEETER
SP7, 8
SUPER TWEETER
SP3, 4
TWEETER
BL
BK
B
C1,
C2
Capacitor
1.8 µF,
250 V
Electrolytic
BK
C1,
C2
Capacitor
1.8 µF,
250 V
Electrolytic
SP3, 4
TWEETER
903, 904
BL
RD
SP1,2
WOOFER
BK
SP1,2
WOOFER
908
905, 906
C
912x4
908x2
908x3
D
SP3,4
E
907
911x2
909
915
SP9, 10
911x2
901, 902
F
SP7, 8
911x2
913x4
G
910x4
SP5,6
H
914x4
SP1,2
1
2
3
4
Figure 11 SPEAKER EXPLODED VIEW
– 11 –
5
6
CD-MPS900/CD-MPS99
PACKING OF THE SET
Setting position of switches and knobs
Tape Mechanism
STOP
SPEAKER
CP-MPS900
CP-MPS99
CD-MPS900
CD-MPS99
SPAKP0032AWZZ
Polyethylene Bag, Unit
T
SSAKH0053AWZZ
Polyethylene Bag,
Speaker
UNIT
SPAKAA010AWZZ
Packing Add., Left/Right
P
O
T
P
O
E
SID
RE
AR
E
T
SID
P
O
FRONT
HT
FR
RIG
ON
T
SPAKAA013AWZZ
Packing Add., Top/Bottom
BO
TTO
M
M
O
T
T
O
B
RE
AR
SPAKZA010AWZZ
Miramat Sheet
A
Energy Star
Label
AM Loop Antenna
Operation Manual
Quick Guide
Remote Control
FM Antenna
92LBAG1460C1
Polyethylene Bag,
Accessories
B
SPAKZA050AWZZ
Pad, Support
SPAKZA007AWZZ
Spacer
T
O
SPAKCA022AWZZ [CD-MPS900]
SPAKCA021AWZZ [CD-MPS99]
Packing Case
P
FR
T
P
RI
O
T
T
GH
ON
P
O
T
E
B
SID
RE
AR
E
SID
A
Not Replacement Item
– 12 –
CD-MPS900/CD-MPS99
–– MEMO ––
– 13 –
CD-MPS900/CD-MPS99
–– MEMO ––
– 14 –
CD-MPS900/CD-MPS99
COPYRIGHT
©
2004 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in
any from or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.
SHARP CORPORATION
AV Systems Group
Quality & Reliability Control Center
Higashihiroshima, Hiroshima 739-0192, Japan
Printed in Japan
A0403-1449DS•HA•M
SC