Download Philips 14PV235/01 Service manual
Transcript
TV-VCR Combination Service Service Service 14PV135/01/07/58 14PV235/01/07/58 14PV385/01/07/39 Service Manual Contents Survey of versions: Chapter /01 /07 /39 /58 Sec. 1: Adjustment Procedure Schematic Diagrams and CBA's Exploded Views Mechanical and Electrical Parts Lists PAL-BG, EURO PAL I, UK/IRELAND PAL/SECAM-BG+PAL/SECAM-L/L',FRANCE PAL-BG/DK+SECAM-BG/DK,EAST-EURO Sec. 2: Standard Maintenance Mechanism Alignment Procedures Disassembly / Assembly of Mechanism Deck Exploded Views For technical data reference is made to the Service Manual of 21PV385/01/07/39/58 3103 785 22330 (VN: 1B). The present manual states only the differences. Safety regulations require that the set be restored to its original condition and that parts which are identical with those specified be used. Published by BK 2004 Video Service Department Printed in the Netherlands c Copyright reserved Subject to modification GB 3103 785 22310 PREPARATION FOR SERVICING [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ] How to Enter the Service Mode Caution: 1 1. Optical sensors system are used for Tape Start and End Sensor on this equipment. Read this page carefully and prepare as described on this page before starting to service; otherwise, the unit may operate unexpectedly. Key Adjustment Mode 5 Head switching point adjustment mode (Manual adjustment): See adjustment instructions page 1-6-17. 6 No need to use. 7 No need to use. 8 H. Shift adjustment mode: See adjustment instructions page 1-6-14. 9 V.size/V. shift adjustment: See adjustment instructions page 1-6-13. Preparing: 1 1. Cover Q202 (START SENSOR) and Q201 (END SENSOR) with Insulation Tape or enter the service mode to activate Sensor Inhibition automatically. Caution: 2 Note: Avoid playing, rewinding or fast forwarding the tape to its beginning or end, because both Tape End Sensors are not active. 1. The deck mechanism assembly is mounted on the Main CBA directly, and SW211 (REC-SAFETY SW) is mounted on the Main CBA. When deck mechanism assembly is removed from the Main CBA due to servicing, this switch can not be operated automatically. How to Enter the Service Mode 1. Turn the power on. (Use main power on the TV unit.) 2. Press [STANDBY/ON], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds. When entering the service mode, “4” will display at corners of the screen. 3. During the service mode, electrical adjustment mode can be selected by remote control key. Preparing: 2 1. To eject the tape, press the STOP/EJECT button on the unit (or Remote Control). 2. When you want to record during the Service mode, press the Rec button while depressing SW211 (REC-SAFETY SW) on the Main CBA. Details are as follows. Key Adjustment Mode MENU Picture adjustment mode: Press the MENU button to change from BRT (Bright), *CNT (Contrast), *COL (Color), *TNT(Tint) and SHP(SHARP). Press P+/P- key to adjust Initial Value. *Marked items are not necessary to adjust normally. - SECAM Black Level adjustment mode: See adjustment instructions page 1-6-13. Cut-Off adjustment mode: See adjustment instructions page 1-6-14. White Balance adjustment mode: See adjustment instructions page 1-6-15. 0 C-Trap adjustment mode: See adjustment instructions page 1-6-12. 1 DSPC adjustment mode: See adjustment instructions page 1-6-12. 2 H adjustment mode: See adjustment instructions page 1-6-11. 3 Head switching point adjustment mode (Auto adjustment): See adjustment instructions page 1-6-17. 4 Auto record mode: Perform recording (15 Sec.)-->Stop-->Rewind (Zero return) automatically. Q201 (END SENSOR) SW211 (REC-SAFETY SW) 1-3-2 Q202 (START SENSOR) MAIN CBA T6450PFS OPERATING CONTROLS AND FUNCTIONS [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58) ] The remote control To record the TV channel selected at this moment or press repeatedly to start a REC One-Touch Recording. STANDBY/ON To switch off or on, interrupt menu function. 0..9 Press to select channels at TVCR. SLEEP To select the switch-off time in 30 minutes intervals. SYSTEM Doesn’t work on this models. (14PV135/01, 07 / 14PV235/01, 07) To change Video (colour) system. (14PV135/58 / 14PV235/58) REC STANDBY/ON STATUS/EXIT To access or remove the TVCR’s on-screen status display. To exit on-screen menus. 1 2 3 CLEAR To delete last entry. To clear a programmed recording (TIMER). To reset the elapsed time counter in the playback, recording or stop mode. 4 5 6 STILL To stop the tape and play back a picture step by step. (except for during fast forwarding and fast rewinding) 7 8 SLEEP 9 SYSTEM 0 STATUS/EXIT PLAY REW CLEAR FWD MENU To call up main menu of TVCR. MENU When tape playback is stopped, press to fast forward the tape at high speed. FWD During playback, press to fast forward the tape while the picture stays on the screen. To store or confirm entry in the menu. Press to adjust the controls of TVCR menu. When tape playback is stopped, press to rewind the tape at high speed. During REW playback, press to rewind the tape while the picture stays on the screen.To return the cursor in the menu. Press to adjust the controls of TVCR menu. PLAY - To play back a tape, select an item in the menu of TVCR. STOP - To stop the tape, select an item in the menu of TVCR. STOP P VOL STILL PROG P VOL + VOL – To adjust the volume. PROG P+ PROG P– To select the programme number. During playback, press to adjust the tracking. MUTE To eliminate the TV’s sound. Press again to restore the volume. MUTE Red button/ Green button/ Yellow button/ Blue button/ Doesn’t work on these models. <14PV235> : To switch Teletext on or off, or transparent mode. : Enlarge font : Select Teletext sub-page : Recall hidden information : Stop page changes : Go back to start page. 1-4-3 T6450IB Front of your TVCR VIDEO AUDIO STANDBY/ ON P STANDBY/ON: To switch off or on, interrupt menu function. Volume: In connection with the button + – to adjust the volume. P+ P- Programme number: To select the programme number. During playback, press to adjust the tracking. To remove vertical jitter in a Still picture. Record: To record the programme currently selected. Playback: To play a recorded cassette. Pause/ Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then ejected from the machine. When tape playback is stopped, press to fast forward the tape at hight speed. When tape playback is stoped, press to rewind the tape at hight speed. Sockets on the front: White socket / AUDIO input socket: To connect a camcorder or a video game machine (audio). Yellow socket / VIDEO input socket: To connect a camcorder or a video game machine (video). Small socket / socket for headphones: To connect headphones. Back of your TVCR Aerial input socket: To connect the aerial cable. EXT1/AV Scart socket :To connect a satellite receiver, decoder, video recorder, etc Power switch: To switch the TV-Video Combi off. Caution: If you switch off using the power switch, TIMER-recordings are impossible! The control lights on the front of machine STANDBY switch. RECORD Standby light: lights up when the TV-Video Combi has been switched on by means of the main Recording light: lights up during recording. FAST blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY. SLOW blink: TIMER RECORDING is stored in a timer block. 1-4-4 T6450IB [ 14PV385/ (01, 07, 39) ] The remote control To record the TV channel selected at this moment or press repeatedly to start a REC One-Touch Recording. STANDBY/ON To switch off or on, interrupt menu function. 0..9 Press to select channels at TVCR. SLEEP To select the switch-off time in 30 minutes intervals. SYSTEM Doesn’t work on this model. (14PV385/01, 07) To change the Video (colour) system. (14PV385/39) REC STANDBY/ON STATUS/EXIT To access or remove the TVCR’s on-screen status display. To exit on-screen menus. 1 2 3 CLEAR To delete last entry. To clear a programmed recording (TIMER). To reset the elapsed time counter in the playback, recording or stop mode. 4 5 6 STILL To stop the tape and play back a picture step by step. (except for during fast forwarding and fast rewinding) 7 8 SLEEP 9 SYSTEM 0 STATUS/EXIT PLAY REW CLEAR FWD MENU To call up main menu of TVCR. MENU When tape playback is stopped, press to fast forward the tape at high speed. FWD During playback, press to fast forward the tape while the picture stays on the screen. To store or confirm entry in the menu. Press to adjust the controls of TVCR menu. When tape playback is stopped, press to rewind the tape at high speed. During REW playback, press to rewind the tape while the picture stays on the screen.To return the cursor in the menu. Press to adjust the controls of TVCR menu. PLAY - To play back a tape, select an item in the menu of TVCR. STOP - To stop the tape, select an item in the menu of TVCR. STOP P VOL STILL PROG P SV/V+ SMART PICTURE MUTE INDEX VOL + VOL – To adjust the volume. PROG P+ PROG P– To select the programme number. During playback, press to adjust the tracking. SV/V+ Red button / To programme recordings with SHOW VIEW / VIDEO Plus+® or to alter / clear programmed TIMER recordings. Select Teletext function when you are in Teletext mode. SMART PICTURE Green button / To call up preset picture settings.Select Teletext function when you are in Teletext mode. Yellow button/ Select Teletext function when you are in Teletext mode. INDEX Blue button / Search for the previous/next recording code on the tape in combination with REW Teletext mode. MUTE - / FWD - . Select Teletext function when you are in To eliminate the TV’s sound. Press again to restore the volume. : Switch Teletext on or off, or transparent mode : Enlarge font : Select Teletext sub-page : Recall hidden information : Stop page changes : Go back to start page 1-4-5 T6450IB Front of your TVCR VIDEO AUDIO STANDBY/ON P STANDBY/ON: To switch off or on, interrupt menu function. Volume: In connection with the button + – to adjust the volume. PP+ Programme number minus: previous programme number Programme number plus: next programme number Record: To record the programme currently selected. Playback: To play a recorded cassette. / Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then ejected from the machine. When tape playback is stopped, press to fast forward the tape at hight speed. When tape playback is stoped, press to rewind the tape at hight speed. Sockets on the front: White socket / AUDIO input socket: To connect a camcorder or a video game machine (audio). Yellow socket / VIDEO input socket: To connect a camcorder or a video game machine (video). Small socket / socket for headphones: To connect headphones. Back of your TVCR Aerial input socket: To connect the aerial cable. EXT1/AV Scart socket : To connect a satellite receiver, decoder, video recorder, etc Power switch: To switch the TVCR off. Caution: If you switch off using the power switch, TIMER-recordings are impossible! The control lights on the front of machine STANDBY RECORD Standby light: lights up when the TVCR has been switched on by means of the main switch. Recording light: lights up during recording. FAST blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY. SLOW blink: TIMER RECORDING is stored in a timer block. 1-4-6 T6450IB CABINET DISASSEMBLY INSTRUCTIONS [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ] 2. Disassembly Method Comparison Chart of Models and Marks Model 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 Mark E F G H I J K L M REMOVAL ID/ LOC. No. 1. Disassembly Flowchart This flowchart indicates the disassembly steps for the cabinet parts, and the CBA in order to gain access to item(s) to be serviced. When reassembling, follow the steps in reverse order. Bend, route and dress the cables as they were. Caution !! When removing the CRT, be sure to discharge the Anode Lead of the CRT with the CRT Ground Wire before removing the Anode Cap. [1] Rear Cabinet [2] Power Unit Anode Cap, *CN501, and Tray 3,4,5 *CN551, *CN601, Chassis CRT CBA Unit [3] Power Unit 3,5 *CN502, *CN552, *CN602 3 [4] Tray Chassis Unit ---------- - [5] H.V./Power Supply 3 CBA 6(S-3) 4 [6] Top Cover 3 5(S-4), CL604 5 [7] Bottom Plate 3 (S-5) 6 3, 5 7(S-6), (S-7), (S-8), Desolder *(CN201, CL401, CL402, CL403) 7 (S-9), *CN751, *CN752 8 [1] Rear Cabinet [2] Power Unit and Tray Chassis Unit [5] H.V./Power Supply CBA [3] Power Unit PART REMOVE/ *UNHOOK/ Fig. UNLOCK/RELEASE/ Note No. UNPLUG/DESOLDER 1,2,5 3 [8] Deck Unit [9] Text CBA -[ F,G,I,J,L, 3, 5 M] [4] Tray Chassis Unit [6] Top Cover [7] Bottom Plate [8] Deck Unit [9] Text CBA [ F,G,I,J,L,M ] 4(S-1), 2(S-2), *CN804 1 2 [10] Main CBA 3 4(S-10) 9 [11] CRT 4 4(S-11) 10 ↓ ↓ ↓ ↓ ↓ (1) (2) (3) (4) (5) [10] Main CBA (1): Order of steps in Procedure. When reassembling, follow the steps in reverse order.These numbers are also used as the identification (location) No. of parts in Figures. (2): Parts to be removed or installed. (3): Fig. No. showing Procedure of Part Location. (4): Identification of part to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered. S=Screw, P=Spring, L=Locking Tab, CN=Connector, *=Unhook, Unlock, Release, Unplug, or Desolder 2(S-2) = two Screw (S-2) (5): Refer to the following "Reference Notes in the Table." [11] CRT 1-5-6 T6450DC Reference Notes in the Table 5. Removal of the Top Cover. Remove five screws (S-4) and CL604, and remove the Top Cover. 6. Removal of the Bottom Plate. Remove a screw (S-5). Then slide the Bottom Plate out front. 7. Removal of the Deck Unit. Remove seven screws (S-6), screw (S-7) and screw (S-8). Then, desolder connectors (CN201, CL401, CL402, CL403) and lift up the Deck Unit. 8. Removal of the Text CBA. [ F,G,I,J,L,M ] Remove screw (S-9), and disconnect connectors CN751 and CN752. Then, lift the Text CBA up. 9. Removal of the Main CBA. Remove four screws (S-10) and pull up the Main CBA. 10.Removal of the CRT. Remove four screws (S-11) and pull the CRT backward. 1. Removal of the Rear Cabinet. Remove four screws (S-1) and two screws (S-2). Disconnect connector CN804 and remove the Rear Cabinet. Caution !! Discharge the Anode Lead of the CRT with the CRT Ground Wire before removing the Anode Cap. 2. Removal of the Power Unit and Tray Chassis Unit. Discharge the Anode Lead of the CRT with the CRT Ground before removing the Anode Cap. Disconnect the following: Anode Cap, CN501, CN551, CN601, and CRT CBA. Then pull the Power Unit and Tray Chassis Unit out backward. 3. Removal of the Power Unit. Disconnect connectors CN502, CN552, and CN602. Then slide the Power Unit out. 4. Removal of the H.V./Power Supply CBA. Remove six screws (S-3) and pull up the H.V./ Power Supply CBA. S-1 [1] REAR CABINET S-2 S-2 S-1 1-5-7 Fig. 1 T6450DC S-1 S-2 S-1 S-2 S-1 S-1 [1] REAR CABINET 1-5-8 Fig. 2 T6450DC S-4 [2] Power Unit and Tray Chassis Unit S-4 S-4 CL604 S-4 S-6 S-6 [6] Top Cover S-6 S-3 S-3 S-3 [ F,G,I,J,L,M ] [9] Text CBA S-6 S-3 S-9 S-10 [8] Deck Unit S-10 Text Holder S-10 [5] H.V./Power Supply CBA S-10 [10] Main CBA S-7 S-8 [3] Power Unit [4] Tray Chassis Unit [7] Bottom Plate S-5 Fig. 3 1-5-9 T6450DC S-11 Anode Cap CRT CBA S-11 S-11 [11] CRT S-11 Fig. 4 1-5-10 T6450DC CRT CBA ANODE CN501B CRT FOCUS SCREEN CN502 CN501 GND H.V./POWER SUPPLY CBA CN552 CL501A CN551 CN602 CN601 TO DEGAUSS COIL TO SPEAKER CL403 CN804 [ F,G,I,J,L,M ] TEXT CBA CL401 CN902 CL302A CN901 MAIN CBA CL301A CL402 CN751 CN752 CN201 CYLINDER ASSEMBLY CL603A CAPSTAN MOTOR CL604 TO TOP COVER FE HEAD ACE HEAD ASSEMBLY DECK UNIT Fig. 5 1-5-11 T6450DC ELECTRICAL ADJUSTMENT INSTRUCTIONS [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ] General Note: How to set up the option code "CBA" is abbreviation for "Circuit Board Assembly." 1. Enter the Service mode. NOTE: Electrical adjustments are required after replacing circuit components and certain mechanical parts. It is important to perform these adjustments only after all repairs and replacements have been completed. Also, do not attempt these adjustments unless the proper equipment is available. 2. Press the [STATUS/EXIT] button on the remote control unit. The option code appears on the display. 3. If needed, input the option code as shown below using number buttons on the remote control unit. Test Equipment Required 1. PAL Pattern Generator (Color Bar, Monoscope, Black Raster, White Raster, Sympte) 2. SECAM Pattern Generator (Gray Scale) 3. AC Milli Voltmeter (RMS) 4. Alignment Tape (9965 000 14514), Blank Tape (E180) 5. DC Voltmeter Model Option Code 14PV135/01 0130 14PV135/07 0128 14PV135/58 0131 14PV235/01 0178 14PV235/07 0176 14PV235/58 0179 14PV385/01 2994 14PV385/07 2992 14PV385/39 2961 4. To reset the software, press [PAUSE] and [5] buttons on the remote control unit. The option code is changed. 6. Oscilloscope: Dual-trace with 10:1 probe, V-Range: 0.001~50V/Div, F-Range: DC~AC-60MHz 7. Frequency Counter 8. Plastic Tip Driver 9. RF input (at each broadcasting system) Receiving Channel : VHF Low Input level : 80dBµV 10.Ext.input FRONT VIDEO-IN JACK or REAR SCART JACK How to Set up the Service mode: NOTE: After replacing the IC202 (Memory) or Main CBA, the set value in IC202 (Memory) will be lost. So it is necessary to set up or adjust in the Service mode after its replacement. Service Mode: 1. Turn the power on. (Use main power on the TV unit.) 2. Press [STANDBY/ON], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds. - To cancel the service mode, press [STANDBY/ON] button on the remote control. 1-6-10 T6450EA 1. DC 105V (+B) Adjustment 2. H Adjustment Purpose: To obtain correct operation. Purpose: To get correct horizontal position and size of screen image. Symptom of Misadjustment: The picture is dark and unit does not operate correctly. Test point Adj. Point TP503 (+B), TP504 (GND) VR601 Tape M. EQ. --- DC Voltmeter, Plastic Tip Driver Mode RF (or Ext.) Symptom of Misadjustment: Horizontal position and size of screen image may not be properly displayed. Input Color Bar Test point Adj. Point Mode Input R590 P+/Pbuttons Ext. --- Tape M. EQ. Spec. --- Frequency Counter 15.625kHz±75Hz Spec. +105±0.5V DC Note: R590 --- H.V./Power Supply CBA Note: TP503(+B), TP504(GND), VR601 --- H.V./Power Supply CBA 1. Connect the unit to AC Power Outlet. (exact AC230V) 2. Input a color bar signal from RF (or Ext.) input and leave it for at least 20 minutes. 3. Connect DC Volt Meter to TP503(+B) and TP504(GND). 4. Adjust VR601 so that the voltage of TP503(+B) becomes +105±0.5V DC. 1. Connect Frequency Counter to R590. 2. Set the unit to the Ext. mode and no input is necessary. Enter the Service mode. (See page 1-6-10.) 3. Operate the unit for at least 20 minutes. 4. Press [2] button on the remote control unit and select H-Adj Mode. 5. Press [P+/P-] buttons on the remote control unit so that the display will change [0] to [7.] At this moment, choose display [0] to [7] when the Frequency counter display is closest to 15.625kHz±75Hz. 6. Turn the power off and on again. 1-6-11 T6450EA 3. C-Trap Adjustment Purpose: To get minimum leakage of the color signal carrier. 4. To enter the DSPC mode, press [1] button on the remote control unit. Recording starts automatically and “DSPC” appears on the display. TVCR Symptom of Misadjustment: If C-Trap Adjustment is incorrect, stripes will appear on the screen. DSPC Test point Adj. Point Mode Input J349F3 (B-OUT) P+/Pbuttons RF Color Bar (or Ext.) Tape M. EQ. Spec. --- Oscilloscope, Pattern Generator 200mVp-p Max. Fig. 2 VIDEO INPUT JACK (Ext. input) Figure 5. Recording continues for 10 seconds in SP mode. Note: Since the reference value of LP V-ENV is computed from the reference value of SP V-ENV, there is no need to survey it. minimum 6. The tape is rewinded to the recording start point. 7. The unit enters the play mode automatically and the V-ENV levels of each the reference value of SP mode and the computing value of LP mode are memorized into the EEPROM. Fig. 1 Note: J349F3 (B-Out)--- Main CBA 1. Connect Oscilloscope to J349F3. 2. Input a color bar signal from RF (or Ext.) input. Enter the Service mode. (See page 1-6-10.) 3. Press [0] button on the remote control unit and select C-TRAP Mode. 8. "OK" or "NG" appears on upper left corner of the screen with blueback. In case of "OK": "OK" (green) is indicated without ejecting tape. In case of "NG": "NG" (red) is indicated with ejecting tape. l 4. Press [P+/P-] buttons on the remote control unit so that the carrier leakage B-Out (4.43MHz) value becomes minimum on the oscilloscope. TVCR TVCR NG OK 5. Turn the power off and on again. 4. How to measure the standard V-ENV value of Digital Studio Picture Control Purpose: To set the recording condition appropriate for the recording tape. Normal Abnormal Fig. 3 Symptom of Misadjustment: Recording or playing back picture quality may fall. The picture will be tinted. 1. Insert a new tape (type: E180) for the DSPC alignment into the TV/VCR. 2. Input the black raster signal from the video input jack (VIDEO-IN). 3. Enter the Service Mode. (See page 1-6-10.) 1-6-12 T6450EA 5. SECAM Black Level Adjustment 6. V. Size Adjustment Purpose: To set Black Level of the SECAM signal RY/B-Y to Ref. level. Purpose: To obtain correct vertical height of screen image. Symptom of Misadjustment: If Black Level of the SECAM signal R-Y/B-Y is incorrect, the picture is bluish or reddish in grayscale compared with PAL signal. Symptom of Misadjustment: If V. Size is incorrect, vertical height of image on the screen may not be properly displayed. Test point Adj. Point P+/Pbuttons J361G4 Mode Input Test point Adj. Point Screen P+/Pbuttons RF Monoscope (or Ext.) Ext. SECAM Gray Scale Tape M. EQ. Spec. --- Pattern Generator 90±5% Tape M. EQ. Spec. --- Pattern Generator, Analog Oscilloscope (unusable Digital Oscilloscope) --- 1. Degauss the CRT and allow CRT to operate for 20 minutes before starting the alignment. 2. Input the SECAM Gray Scale signal from Ext. input. Mode Input 1. Enter the Service mode. (See page 1-6-10.) Press [9] button on the remote control unit and select V-S Mode. (Press [9] button then display will change to V-P and V-S). 2. Input monoscope pattern and leave it for at least 20 minutes. 3. Enter the Service Mode. (See page 1-6-10.) 3. Press [P+/P-] buttons on the remote control unit so that the monoscope pattern is 90±5% of display size and the circle is round. 4. To enter the C/D/S mode, press [ remote control unit. 7. V. Shift Adjustment -] on the 5. To select SBR (SECAM Black Level R-Y), press [6] button on the remote control unit. Purpose: To obtain correct vertical position of screen image. 6. Press [P+/P-] buttons to adjust Y signal to the black ref. level. Symptom of Misadjustment: If V. position is incorrect, vertical position of image on the screen may not be properly displayed. 7. To select SBB (SECAM Black Level B-Y), press [7] button on the remote control unit. 8. Press [P+/P-] buttons to adjust Y signal to the black ref. level. Test point Adj. Point Mode Input Screen P+/Pbuttons RF Monoscope (or Ext.) Tape M. EQ. Spec. --- Pattern Generator 90±5% Y Signal 1. Enter the Service mode. (See page 1-6-10.) Press [9] button on the remote control unit and select V-P Mode. (Press [9] button then display will change to V-P and V-S). 1H Black REF. Level 1H 5mV/Div (10:1 Prove) 1H Fig. 4 2. Input monoscope pattern and leave it for at least 20 minutes. 3. Press [P+/P-] buttons on the remote control unit so that the top and bottom of the monoscope pattern are equal to each other. 1-6-13 T6450EA 8. H. Shift Adjustment Purpose: To obtain correct horizontal position and size of screen image. Symptom of Misadjustment: Horizontal position and size of screen image may not be properly displayed. Test point Adj. Point Mode Screen P+/Pbuttons RF Monoscope (or Ext.) Tape M. EQ. Spec. --- Pattern Generator 90±5% 8. To enter the CUT OFF (G) mode, press [2] button on the remote control unit. 9. Press the [P+/P-] buttons until the horizontal line becomes white. 10.To enter the CUT OFF (B) mode, press [3] button on the remote control unit. 11.Press the [P+/P-] buttons until the horizontal line becomes white. Input 12.Turn the screen control so that the horizontal line adjusted white looks lightly. 13.Turn the power off and on again. 1. Enter the Service mode. (See page 1-6-10.) Press [8] button on the remote control unit and select H-P Mode. 2. Input monoscope pattern and leave it for at least 20 minutes. 3. Press [P+/P-] buttons on the remote control unit so that the left and right side of the monoscope pattern are equal to each other. 4. Turn the power off and on again. 9. Cut-off Adjustment Purpose: To adjust the beam current of R, G, B, and screen voltage. Symptom of Misadjustment: White color may be reddish, greenish or bluish. Test point Adj. Point Mode Input Screen Screen-Control, P+/P- buttons RF Black (or Ext.) Raster Tape M. EQ. Spec. --- Pattern Generator See Reference Notes below Notes: Screen Control (FBT) --- H.V./Power Supply CBA FBT= Fly Back Transformer Use the Remote Control Unit 1. Degauss the CRT and allow CRT to operate for 20 minutes before starting the alignment. 2. Set the screen control to minimum position. Input the Black raster signal from RF (or Ext.) input. 3. Enter the Service Mode. (See page 1-6-10.) Dimmed horizontal line appears on the CRT. 4. To enter the C/D/S mode, press the [ on the remote control unit. -] button 5. To enter the CUT OFF (R) mode, press [1] button on the remote control unit. 6. Turn the screen control up until dimmed horizontal line appears. 7. Press the [P+/P-] buttons until the horizontal line becomes white. 1-6-14 T6450EA 10. White Balance Adjustment 11. Sub-Brightness Adjustment Purpose: To mix red, green and blue beams correctly for pure white. Symptom of Misadjustment: White becomes bluish or reddish. Purpose: To get proper brightness. Symptom of Misadjustment: If Sub-Brightness is incorrect, proper brightness cannot be obtained by adjusting the Brightness Control. Test point Adj. Point Mode Input Test point Adj. Point Screen Screen-Control, P+/P- buttons RF (or Ext.) White Raster (APL 100%) Screen P+/Pbuttons RF SYMPTE (or Ext.) Tape M. EQ. Spec. --- Pattern Generator See below Tape --- M. EQ. Spec. Pattern Generator, Color analyzer Mode Input See below Figure Figure White Color Ajalyzer Black ABC Fig. 5 Note: Use remote control unit 1. Operate the unit more than 20 minutes. 2. Face the unit to east. Degauss the CRT using Degaussing Coil. 3. Input the White Raster (APL 100%). 4. Set the color analyzer to the CHROMA mode and after zero point calibration, bring the optical receptor to the center on the tube surface (CRT). 5. Enter the Service mode. Press [ -] button on the remote control. 6. Press [4] button on the remote control unit for Red adjustment. Press [5] button on the remote control unit for Blue adjustment. 7. In each color mode, Press [P+/P-] buttons to adjust the values of color. 8. Adjusting Red and Blue color so that the temperature becomes 8500K (x : 290 / y : 300) ±3%. 9. At this time, Re-check that Horizontal line is white. If not, Re-adjust Cut-off Adjustment until the Horizontal Line becomes pure white. 10. Turn off and on again to return to normal mode. Receive APL 100% white signal and Check Chroma temperatures become 8500K (x : 290 / y : 300) ±3%. Note: Confirm that Cut Off Adj. is correct after this adjustment, and attempt Cut Off Adj. if needed. This bar (A) just visible Fig. 6 Note: Bar (A) in Fig. 7 --- 0 IRE 1. Enter the Service Mode. (See page 1-6-10.) Then input SYMPTE signal from RF (or Ext.) input and leave it for at least 20 minutes. 2. Press MENU button. (Each time MENU button is pressed, display will change BRT, CNT, COL, TNT, and SHP in that order.) Select BRT and press [P+/ P-] buttons so that the bar (A) in Fig. 6 is just visible. 3. Turn the power off and on again. 1-6-15 T6450EA 12. Setting for CONTRAST, COLOR, TINT and SHARP Data Values 13. Focus Adjustment Purpose: Set the optimum Focus. Symptom of Misadjustment: If Focus Adjustment is incorrect, blurred images are shown on the display. General 1. Enter the Service mode. (See page 1-6-10) 2. Press MENU button. (Each time MENU button is pressed, display will change BRT, CNT, COL, TNT, and SHP in that order.) CONTRAST (CNT) 1. Press "MENU" button on the remote control unit. Then select CNT display. 2. Press [P+/P-] buttons on the remote control unit so that the value of "CONTRAST" (CNT) becomes 83. COLOR (COL) 1. Press "MENU" button on the remote control unit. Then select "COLOR" (COL) display. 2. Press [P+/P-] buttons on the remote control unit so that the value of "COLOR" (COL) becomes 65. TINT (TNT) 1. Press "MENU" button on the remote control unit. Then select "TINT" (TNT) display. Test point Adj. Point Mode Input Screen Focus Control RF Monoscope (or Ext.) Tape M. EQ. Spec. --- Pattern Generator See below. Note: Focus VR (FBT) --- H.V./Power Supply CBA FBT= Fly Back Transformer 1. Operate the unit more than 30 minutes. 2. Face the unit to the East and degauss the CRT using a Degaussing Coil. 3. Input the monoscope pattern. 4. Adjust the Focus Control on the FBT to obtain clear picture. 2. Press [P+/P-] buttons on the remote control unit so that the value of "TINT" (TNT) becomes 68. SHARP (SHP) 1. Press "MENU" button on the remote control unit. Then select "SHARP" (SHP) display. 2. Press [P+/P-] buttons on the remote control unit and select "1." 1-6-16 T6450EA 14. Head Switching Position Adjustment Purpose: Determine the Head Switching Position during Playback. Symptom of Misadjustment: May cause Head Switching Noise or Vertical Jitter in the picture. Note: Unit reads Head Switching Position automatically and displays it on the screen (Upper Left Corner). Manual Adjustment 1. Enter the Service Mode. (See page 1-6-10.) 2. Playback the test tape (9965 000 14514). 3. Press the number [5] button on the remote control unit. 4. The Head Switching position will display on the screen; if adjustment is necessary follow step 4. 7.0H (448µs) is preferable. 5. Press [P+/P-] buttons on the remote control unit if necessary. The value will be changed in 0.5H steps up or down. Adjustable range is up to 9.5H. If the value is beyond adjustable range, the display will change as: Lower out of range: 0.0H Upper out of range: -.-H 6. Turn the power off and on again. Auto Adjustment 1. Load the test tape (9965 000 14514) that have been recorded the Head Switching Position Value. 2. Enter the service mode. 3. Press [3] button on the remote control unit in the tape stop mode. The unit playback and adjust the Head Switching Position automatically. 4. The adjusting report appears on upper left corner of the screen with blueback. In case of adjusting correctly: the Head Switching Position Value recorded in the test tape (9965 000 14514) is indicated with green. In case of adjusting incorrectly: "NG" (red) is indicated with ejecting tape. l TVCR TVCR NG 7.0H Correct Incorrect Fig. 7 1-6-17 T6450EA Adjustment Points and Test Points H.V./Power Supply CBA Top View Focus-control (Upper side) Screen-control (Lower side) R590 (H Adjustment) TP503 +B VR601 +B ADJ TP504 GND Main CBA Top View TP002 RF-SW TP007 N-A-PB (SECAM Black Level Adjustment) TP001 CTL TP008 C-PB IC202 J361G4 TP003 V-OUT J349F3 B-OUT TEST POINT INFORMATION : Indicates a test point with a jumper wire across a hole in the PCB. TEST POINTS NOT USED IN ELECTRICAL ADJUSTMENTS Test Point TP001 Used in: Mechanical Alignment Procedures TP002 TP008 TP503 Mechanical Alignment Procedures Mechanical Alignment Procedures Electrical Adjustment Instructions TP504 Electrical Adjustment Instructions 1-6-18 Page No. 2-3-3 2-3-3, 2-3-4 2-3-3, 2-3-4 1-6-10 1-6-10 T6450EA 1-7-7 DRUM MOTOR M LOADING MOTOR PG SENSOR CYLINDER ASSEMBLY CONTROL HEAD AC HEAD ASSEMBLY (DECK ASSEMBLY) M CTL(+) CTL(-) " 2 1 CAPSTAN MOTOR M CAPSTAN MOTOR P-ON+5V(3) C-FG C-F/R C-CONT FG-GND LD-CONT D-CONT D-PFG M-GND AL+12V(1) VG CM+12V/+20.5V SENSOR CBA (END-SENSOR) SENSOR CBA (ST-SENSOR) Q201 END-SENS. Q202 MAIN CBA ST-SENS. CL402 " = SMD TIMER+5V AL+5V RESET Q204 S-REEL PI201 AL+12V(1) +33V CM+12V/+20.5V P-ON+5V(3) T-REEL CTL TP001 RS201 REMOTE SENSOR WF3 G,J,M SW212 LD-SW AL+5V 81 LD-CONT 77 D-CONT 90 D-PFG 76 C-CONT 87 C-FG 78 C-F/R 34 RESET 79 S-REEL SP-MUTE 44 1ST-SND-H 21 G,J,M TRICK-H SECAM-H M 47 33 32 74 13 6 15 RF-SW 18 C-SYNC DV-SYNC V-ENV C-ROTA D-REC-H DAV-L 83 G,J REC-SAFETY 31 SW211 REC SAFETY 5 SDA TRICK-H SECAM-H RF-SW C-SYNC DV-SYNC V-ENV C-ROTA D-REC-H DAV-L SCL SDA SCL SDA A-MUTE-H EXT-L SCART-H SCART-MUTE SP-MUTE 1ST-SND-H SCL SDA I C-OPEN 2 7 CS SDA 72 I C-OPEN 45 2 IC202 (MEMORY) AL+5V 6 SCL D204 STANDBY E F G H I Mark P-ON-H P-DOWN-L C-POWER-SW 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 Model J K L M Mark TO VIDEO BLOCK TO AUDIO BLOCK TO TV BLOCK TO POWER SUPPLY BLOCK 14PV385/01 14PV135/58 14PV235/58 14PV385/39 Model Comparison Chart of Models & Marks SCL 71 A-MUTE-H 20 EXT-L 42 SCART-H 48 SCART-MUTE 29 10 ST-SENS. 4 END-SENS. 80 T-REEL 9 LD-SW REC-LED 23 REC-LED 24 97 CTL AMP-OUT P-ON-H 67 95 CTL(+) P-DOWN-L 85 94 CTL(-) D202 REC KEY SWITCH KEY-2 8 C-POWER-SW 66 14 REMOTEG,J,M SW205 KEY SWITCH SW206 SW210 SW201 KEY-1 7 IC201 (SERVO/SYSTEM CONTROL) TEST POINT INFORMATION :INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB. :USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE. :USED TO INDICATE A TEST POINT WITH NO TEST PIN. :USED TO INDICATE A TEST POINT WITH A TEST PIN. D201 S-LED Q205 CN201 1 2 3 4 5 6 7 8 9 10 11 12 NOTE FO R WI RE CONNECTORS: 1. PREFIX SYMBOL "CN" MEANS CONNECTOR. (CAN DISCONNECT AND RECONNECT.) 2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER HOLES OF THE PCB. (WIRE IS SOLDERED DIRECTLY.) BLOCK DIAGRAMS [ 14PV135/ ( 01, 07, 58 ), 14PV235/ ( 01, 07, 58 ), 14PV385/ ( 01, 07, 39 ) ] Servo/System Control Block Diagram T6450BLS " JK703 1-7-8 TO TV BLOCK V-IN 20 V-OUT 19 JK701 V-IN Q703 VIDEO TU1-VIDEO VIDEO OUT 17 TU002 G,J,M TO TV BLOCK MAIN CBA VIDEO OUT 17 TU001 " = SMD TP010 GND 63 61 48 50 52 54 56 WF4 Q401 BUFFER WF5 TP003 V-OUT BUFFER C-VIDEO MUTE PB/EE TUNER2 TUNER1 MUTE PB/EE LINE SCART LINE SCART TUNER2 TUNER1 58 BYPASS AGC 59 AGC R FBC P CHARA. INS. 65 1/2 TO SERVO/SYSTEM CONTROL BLOCK 28 29 VXO WF2 CHROMINANCE SIGNAL PROCESS R SERIAL DECORDER 68 69 CCD 1H DELAY X401 4.43MHz Y/C MIX 46 LUMINANCE SIGNAL PROCESS Y. DELAY 43 SDA SCL DAV-L C Y R WF6 79 21 + TP008 C-PB PR 78 P P PB-H OUT 44 96 95 93 94 D-REC-H 80 SP HEAD AMP V-ENV 84 C-SYNC 67 RF-SW/C-ROTA 70 D-V-SYNC 62 DAV-L SDA SCL VPS-V G,J WF1 TP002 RF-SW PB-VIDEO SIGNAL IC101 (VPS) REC FM AGC 14 6 7 16 REC-VIDEO SIGNAL TEST POINT INFORMATION :INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB. :USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE. :USED TO INDICATE A TEST POINT WITH NO TEST PIN. :USED TO INDICATE A TEST POINT WITH A TEST PIN. IC401 (VIDEO/AUDIO SIGNAL PROCESS) NOTE FOR WIRE CONNECTORS: 1. PREFIX SYMBOL "CN" MEANS CONNECTOR. (CAN DISCONNECT AND RECONNECT.) 2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER HOLES OF THE PCB. (WIRE IS SOLDERED DIRECTLY.) 28 1 29 17 12 2 16 14 1 2 3 Model 14PV385/01 14PV135/58 14PV235/58 14PV385/39 PAL/SECAM DETECTOR M TO SERVO/SYSTEM CONTROL BLOCK VIDEO (L) HEAD VIDEO (R) HEAD J K L M Mark CYLINDER ASSEMBLY (DECK ASSEMBLY) E F G H I Mark IC471 (PAL/SECAM DECTECOTR) TRICK-H SECAM-H V-ENV C-SYNC D-REC-H RF-SW C-ROTA DV-SYNC CL401 V(R) V-COM V(L) MODE: SP/REC 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 Model Comparison Chart of Models & Marks Video Block Diagram T6450BLV " = SMD 1-7-9 1 A-OUT JK703 Q701 1ST-SND-H 14 11 FULL ERASE HEAD FE HEAD 13 12 13 12 SCART-H EXT-L 14 4 15 G,J,M CL402 A-PB/REC A-COM AE-H/FE-H FE-H CL403 1 FE-H 2 FE-H-GND 3 4 6 5 TO SERVO /SYSTEM CONTROL BLOCK 54 Q856 +5V 1 2 Q852(PB=ON) +5V SP/LP-ON EQ AMP AUTO BIAS PB-ON TUNER1 13 TUNER2 15 LINE 17 5 6 50 7 7 3 8 WF9 IC401 (AUDIO SIGNAL PROCESS) SWITCHING Q851 D-REC-OFF Q853(PB=ON) Q855 BIAS OSC Q854 AUDIO MUTE ATT 100 9 INV SP-MUTE 1 REC AMP P R AUDIO HD-SW CONTROL 16 ATT ALC ALC DET 1 2 68 69 SERIAL DECODER CN804 SP SP-GND Mode : SP/REC TO SERVO/SYSTEM CONTROL BLOCK REC-AUDIO SIGNAL OUTPUT AMP MUTE 5 IC151 (AMP) MAIN CBA PB-AUDIO SIGNAL IC301 (VIDEO/AUDIO/CHROMA/DEFLECTION/IF) TUNER1 52 LINE 53 WF7 TEST POINT INFORMATION :INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB. :USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE. :USED TO INDICATE A TEST POINT WITH NO TEST PIN. :USED TO INDICATE A TEST POINT WITH A TEST PIN. SCART-MUTE 11 10 9 SW CTL SCART 5 LINE 3 SCART 1 LINE 2 IC701 (SW) TU1 TU2 SW CTL IC702 (SW) ACE HEAD ASSEMBLY AUDIO ERASE HEAD AUDIO HEAD (DECK ASSEMBLY) 2 A-IN JK702 A-IN TO SERVO /SYSTEM CONTROL BLOCK TU002 AUDIO OUT 21 AUDIO OUT 6 TU001 " NOTE FOR WIRE CONNECTORS: 1. PREFIX SYMBOL "CN" MEANS CONNECTOR. (CAN DISCONNECT AND RECONNECT.) 2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER HOLES OF THE PCB. (WIRE IS SOLDERED DIRECTLY.) 71 Model 14PV385/01 14PV135/58 14PV235/58 14PV385/39 MUTE 11 12 WF8 TP007 N-A-PB J K L M Mark TO SERVO/SYSTEM CONTROL BLOCK SP151 SPEAKER JK151 HEADPHONE JACK E F G H I Mark A-MUTE-H SDA SCL REC-ON LINE AMP CL801 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 Model Comparison Chart of Models & Marks Audio Block Diagram T6450BLA 35 32 33 34 41 42 TELETEXT DECODER OSC/CLOCK GENERATOR 1-7-10 8 7 TO VIDEO BLOCK C-VIDEO OSD-R 15 OSD-G 11 OSD-B OSD-BLK OSD-B OSD-G OSD-R Y-SW-OUT V-SYNC H-SYNC SDA SCL IC201 (SYSTEM CONTROL/OSD) 82 64 63 62 60 68 61 65 59 58 TEXT-L OSD-R OSD-G OSD-B OSD-BLK SLOW-SW-IN RGB CONT RAPID-SW-IN WF18 V-SYNC WF17 H-SYNC 56 C-VIDEO JK703 I C-OPEN SCL SDA RAPID-SW 16 SLOW-SW TO SERVO/SYSTEM CONTROL BLOCK 2 12MHz OSC X901 CN901 5 1 2 4 3 CN902 2 4 6 3 (NO CONNECTION) INT.MONITOR 2 I C-OPEN SDA CN303 is used for adjustment at factory SCL TEXT CBA 50 49 23 37 36 I2C I/F DISPLAY TIMING ADC/ DATA SLICER IC901 (TELETEXT DECODER) F,G,I,J,L,M CN303 1 2 4 5 CN751 5 1 2 4 3 CN752 2 4 6 3 9 10 11 SW CTL 14 15 4 MAIN CBA " = SMD IC703 (SW) Q710 12 13 2 1 5 3 " Q702 Q706 +5V 27 20 28 30 17 21 13 12 WF10 +5V Q704 INV V-SYNC PROCESS CIRCUIT INTELLIGENT MONITORING 43 Q711 SERIAL I/F H-SYNC PROCESS CIRCUIT SYNC SEPARATION SECAM DECODER CLOCK CONTROL CIRCUIT BASE BAND 1H DELAY LINE PAL DECODER CHROMA BPF OSD MIX/RBG MATRIX/ BLANKING LUMA SIGNAL PROCESS CIRCUIT CHROMA TRAP TUNER TUNER LINE/PB LINE/PB 6 7 31 16 15 14 32 34 36 Mode : SP/REC 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 Model CL302A 2 1 5 4 3 FBP H-DRIVE ACL V-RAMP-FB V-DRIVE CL301A 2 BLUE 1 GREEN 3 RED Model J K L M Mark TO CRT/H.V. BLOCK CL302B TO CRT/H.V. BLOCK CL301B TO VIDEO BLOCK 14PV385/01 14PV135/58 14PV235/58 14PV385/39 VIDEO TU1-VIDEO E F G H I Mark Comparison Chart of Models & Marks X301 4.43MHz WF11 NOTE FOR WIRE CONNECTORS: 1. PREFIX SYMBOL "CN" MEANS CONNECTOR. (CAN DISCONNECT AND RECONNECT.) 2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER HOLES OF THE PCB. (WIRE IS SOLDERED DIRECTLY.) PB VIDEO SIGNAL IC301 (VIDEO/AUDIO/CHROMA/DEFLECTION/IF) 10 11 40 REC VIDEO SIGNAL TEST POINT INFORMATION :INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB. :USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE. :USED TO INDICATE A TEST POINT WITH NO TEST PIN. :USED TO INDICATE A TEST POINT WITH A TEST PIN. TV Block Diagram T6450BLT 1-7-11 TO TV BLOCK CL301A TO TV BLOCK CL302A DEF+B +B CN301 3 1 2 CL301B 3 1 2 JUNCTION-C CBA CN302 2 1 5 4 3 CL302B 2 1 5 4 3 JUNCTION-B CBA TO POWER SUPPLY BLOCK CN552 2 1 5 4 3 CN502 RED 2 GREEN 4 BLUE 3 FBP H-DRIVE ACL V-RAMP-FB V-DRIVE WF12 H.DRIVE Q533 H.OUTPUT Q551 T552 4 3 5 1 6 9 7 10 8 Q501 RED AMP T551 F.B.T. 11 S F 1 7 CRT CBA REC VIDEO SIGNAL GREEN AMP Q502 6 AMP FOCUS SCREEN ANODE VCC 2 5 WF15 CL501A 1 HEATER 3 P-ON+160V 3 PUMP UP THERMAL PROTECTION IC551 (V-DEFLECTION CONTROL) SCREEN VR FOCUS VR WF14 HV TEST POINT INFORMATION :INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB. :USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE. :USED TO INDICATE A TEST POINT WITH NO TEST PIN. :USED TO INDICATE A TEST POINT WITH A TEST PIN. H.V./POWER SUPPLY CBA NOTE FOR WIRE CONNECTORS: 1. PREFIX SYMBOL "CN" MEANS CONNECTOR. (CAN DISCONNECT AND RECONNECT.) 2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER HOLES OF THE PCB. (WIRE IS SOLDERED DIRECTLY.) Q503 BLUE AMP CL501B 1 3 WF16 PB VIDEO SIGNAL 1 3 4 5 CN501 V501 CRT GND HEATER R G B FOCUS SCREEN GND ANODE HDRIVE VDRIVE DEFLECTION-YOKE JK501 CN551 WF13 Mode : SP/REC CRT/H.V. Block Diagram T6450BLCRT TO DEGAUSSING COIL TO AC-CORD CN601 SW601 POWER SWITCHING Q602 PS602 1-7-12 LIMITER Q603 F601 L601 T4A/250V LINE FILTER BRIDGE RECTIFIER D601 - D604 1 2 4 3 T601 8 9 G,J,M FEED BACK Q604 10 11 12 13 14 +B ADJ. VR601 Q608 Q605 Q606 +5V REG. TP504 GND H.V./POWER S UPPLY CBA COLD TP503 +B NOTE : The voltage for parts in hot circuit is measured using hot GND as a common terminal. CAUTION FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE T4A/250V FUSE. IC601 ERROR VOLTAGE DET 1 2 4 6 HOT CAUTION ! Fixed voltage power supply circuit is used in this unit. If Main Fuse (F601) is blown, check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. DEF+B +B " = SMD Q607 +8V REG. " 11 8 7 3 5 12 6 4 AL+33V AL+9V AL+12V(2) AL+12V(1) AL+5V P-ON+8V P-ON-L P-DOWN-L CN602 2 AL+20.5V TO CRT/H.V. BLOCK 11 8 7 3 5 12 6 4 CL603B 2 TOP COVER 11 8 7 3 5 12 6 4 Q686 +5V REG. Q684 +5V REG. IC681 +5V REG. Q682 55 +5.7V REG. IC301 CL603A 2 CL604 JUNCTION-A CBA 11 8 7 3 5 12 6 4 CN603 2 Model J K L M Mark C-POWER-SW (TO PIN66 OF IC201) CM+12V/+20.5V P-DOWN-L (TO PIN85 OF IC201) 14PV385/01 14PV135/58 14PV235/58 14PV385/39 MAIN CBA P-ON+5V(1) P-ON+5V(3) P-ON+5V(2) AL+12V(2) AL+12V(1) AL+5V P-ON+8V P-ON-H (TO PIN67 OF IC201) AL+9V TIMER+5V AL+33V Q683 E F G H I Mark P-ON-ON 39 Q681 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 Model Comparison Chart of Models & Marks G,J,M Q206 NOTE FO R WI RE CONNECTORS: 1. PREFIX SYMBOL "CN" MEANS CONNECTOR. (CAN DISCONNECT AND RECONNECT.) 2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER HOLES OF THE PCB. (WIRE IS SOLDERED DIRECTLY.) TEST POINT INFORMATION :INDICATES A TEST POINT WITH A JUMPER WIRE ACROSS A HOLE IN THE PCB. :USED TO INDICATE A TEST POINT WITH A COMPONENT LEAD ON FOIL SIDE. :USED TO INDICATE A TEST POINT WITH NO TEST PIN. :USED TO INDICATE A TEST POINT WITH A TEST PIN. Power Supply Block Diagram T6450BLP [ 14PV135/ ( 01, 07, 58 ), 14PV235/ ( 01, 07, 58 ), 14PV385/ ( 01, 07, 39 ) ] Main 1/5 Schematic Diagram Parts Location Guide Ref No. Position CAPACITORS C203 B-3 C205 C207 B-3 B-1 C208 C209 Ref No. Position CONNECTOR F-4 CN201 DIODES Ref No. Position RESISTORS B-3 R220 Ref No. Position RESISTORS D-1 R266 D201 B-3 R221 R222 B-3 B-3 R267 R268 E-1 E-3 B-1 C-1 D202 D204 B-2 B-2 R223 R224 B-2 B-2 R269 R270 E-3 B-1 C210 C211 C-1 B-1 D205 D206 B-1 D-3 R226 R227 B-1 B-1 R271 R272 B-2 B-3 C212 C213 B-1 B-1 D210 D211 D-2 D-2 R228 R229 B-1 B-1 R273 R274 B-2 B-2 C214 C217 B-1 C-1 D212 D213 D-2 A-4 R230 R231 B-1 C-1 R275 R276 D-2 D-2 C218 C221 C-1 D-2 D-2 D214 A-4 R232 R233 R277 R278 C-3 R234 R235 C-1 C-1 C-1 D-2 D-2 D-2 C222 C223 C224 C225 C226 C227 C228 C229 C230 C231 C233 C234 C235 C236 C237 D-2 D-2 ICS IC201 IC202 D-1 COIL D-2 D-2 D-2 L201 TRANSISTORS D-3 D-3 Q204 D-3 E-3 D-4 D-4 D-4 C-4 R236 R237 R238 R239 B-1 D-4 Q205 C-4 Q206 RESISTORS R201 R202 R203 C-4 C-4 R204 R205 R206 C238 C239 C-4 C-4 C240 C241 R240 R241 R242 R243 B-4 B-4 R244 R248 B-3 B-4 B-3 B-3 R249 R250 R251 R207 R208 B-4 B-4 C-4 C-4 R209 R210 C242 C243 D-4 D-4 C244 C245 D-2 D-2 D-2 D-2 D-2 D-2 D-3 D-3 D-3 D-3 D-3 D-3 R279 R280 R281 R282 R288 R289 D-2 C-1 D-2 E-1 E-1 C-4 R884 SWITCHES SW201 SW202 SW203 SW204 B-4 A-4 A-4 A-4 A-4 D-4 E-4 SW205 SW206 SW207 R252 R254 E-4 C-4 SW208 SW209 A-4 A-4 A-4 A-4 R255 R256 C-4 C-4 SW210 SW211 A-4 B-1 R211 R212 A-4 A-4 R257 R258 B-3 B-4 A-4 SW212 TEST POINT C-4 C-4 R213 R214 B-4 B-4 R259 R260 B-4 A-4 C248 C253 B-1 B-2 R215 R216 A-4 A-4 R261 R262 A-4 A-4 C254 C255 C256 C-4 C-4 R217 R218 R219 A-4 B-3 R263 R264 R265 A-4 A-4 C-1 B-3 1-8-41 D-1 B-4 A-4 C-4 TP001 CRYSTAL OSCILATORS C-1 X201 C-1 X202 MISCELLANEOUS PI201 D-4 RS201 B-1 Main 1/5 Schematic Diagram Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: 1 “ “ = SMD 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. 1-8-42 2 ~ 3 5.0 (2.5) Comparison Chart of Models and Marks PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. 1-8-43 MODEL MARK 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 E F G H I J K L M T6450SCM1 Main 2/5 Schematic Diagram Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: 1 “ “ = SMD 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. 1-8-44 2 ~ 3 5.0 (2.5) Comparison Chart of Models and Marks PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. 1-8-45 MODEL MARK 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 E F G H I J K L M T6450SCM2 Main 2/5 Schematic Diagram Parts Location Guide Ref No. Position CAPACITORS Ref No. Position CAPACITORS Ref No. C401 J-1 C445 H-2 C402 C403 J-1 J-1 C452 C851 J-4 H-1 Q401 C404 C405 J-1 J-1 C855 C856 H-1 G-1 C406 C407 J-1 J-1 C857 C858 C408 C409 J-1 K-2 C410 C411 C412 C413 C414 C415 C416 C417 C418 C419 C420 C421 C422 C424 Position COILS R860 H-1 J-4 R861 R862 I-1 I-1 Q851 Q852 H-1 G-1 R863 R864 H-1 I-1 G-1 H-1 Q853 Q854 G-1 H-1 R865 R866 I-1 I-1 C859 C860 H-1 H-1 R867 R869 I-1 I-1 K-2 K-2 C861 C862 H-2 H-1 H-1 Q855 H-1 Q856 RESISTORS R870 R871 I-1 J-2 K-2 K-2 K-2 C863 C864 I-1 I-1 I-1 R873 R874 I-1 I-1 I-1 K-3 K-3 K-3 K-3 K-3 K-3 K-3 K-3 C865 C866 H-1 L854 TRANSISTORS R412 R413 I-1 I-1 K-3 K-4 K-4 J-4 J-4 I-4 I-4 I-4 I-1 K-4 J-4 J-1 C876 J-1 C877 CONNECTORS R416 R418 R420 H-3 H-3 C430 C431 H-4 J-4 CL401 CL402 G-3 G-2 R422 R423 K-4 K-4 C432 C433 J-4 J-4 G-1 CL403 DIODES R424 R425 H-4 I-4 C434 C435 J-4 I-4 D401 D402 K-3 H-4 R426 R851 I-4 H-1 C436 C438 H-4 H-4 H-2 R852 R853 H-1 H-1 C440 C441 H-4 H-4 L401 K-3 R854 R856 H-1 H-1 C442 C443 C444 H-3 H-3 L402 L403 L852 H-3 H-4 R857 R858 R859 G-1 G-1 K-4 J-4 H-2 C874 C875 J-1 K-2 K-2 R410 R411 I-1 J-1 C872 C873 R402 R405 R408 R409 I-1 I-1 C870 C871 J-1 R406 R407 I-1 I-1 C867 C869 R401 R414 R415 C425 C426 C427 Ref No. Position RESISTORS IC IC401 COILS H-1 1-8-46 H-4 H-4 H-1 R875 R876 R877 R878 I-1 I-1 H-2 H-2 R879 CRYSTAL OSCILATOR J-2 X401 TEST POINTS TP002 I-4 TP003 K-4 I-1 TP007 TP008 TP010 J-1 K-1 Main 3/5 Schematic Diagram Parts Location Guide Ref No. Position CAPACITORS Ref No. Position CAPACITORS Ref No. Position RESISTORS C001 R-4 C331 N-2 R156 N-4 C002 C005 Q-4 Q-3 C332 C333 N-3 N-2 R157 R301 P-4 N-1 C006 C008 Q-3 Q-3 C334 C336 N-2 P-3 R302 R303 N-1 N-1 C009 C014 R-3 Q-3 C338 C340 M-3 P-1 R304 R305 O-1 O-1 C151 C152 O-4 N-4 C341 C344 N-2 M-3 R306 R307 O-1 O-1 C154 C155 O-4 P-4 N-3 C350 CONNECTORS R308 R309 O-1 O-1 C156 C157 P-4 P-4 CL301A CL302A R-1 M-4 R310 R311 P-1 P-3 C160 C301 P-4 N-1 R312 R313 O-1 P-2 C302 C303 N-1 N-1 M-3 CN303 M-4 CN804 DIODES D151 O-4 R314 R315 P-2 P-2 C304 C305 N-1 N-1 D152 D302 O-4 O-1 R316 R317 P-2 P-3 C307 C308 O-3 P-2 D303 D304 O-1 O-1 R318 R320 P-3 O-3 C309 C310 P-2 P-2 D305 D306 P-3 P-2 R321 R322 N-3 N-3 C311 C312 P-2 P-2 O-4 R323 R324 N-3 N-3 C313 C314 P-2 P-2 IC301 N-1 R325 R326 N-2 N-2 C315 C316 P-2 P-3 L001 L151 Q-4 N-4 R327 R332 M-2 M-3 C317 C318 P-3 O-3 L152 L302 N-4 P-2 R333 R334 M-3 M-3 C319 C320 P-3 P-3 L303 L304 P-3 N-1 R335 R336 N-3 O-1 C321 C322 O-3 O-3 O-3 L305 RESISTORS R339 R340 O-1 O-1 C323 C324 N-3 N-3 R003 R004 Q-3 Q-3 C325 C326 N-3 N-3 R151 R152 M-4 O-4 C327 C328 N-3 N-3 R153 R154 P-4 P-4 C330 N-2 R155 N-4 ICS IC151 COILS 1-8-47 CRYSTAL OSCILATOR X301 P-3 MISCELLANEOUS JK151 M-4 TU001 TU002 R-4 Q-4 Main 3/5 Schematic Diagram Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: 1 “ “ = SMD 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. 1-8-48 2 ~ 3 5.0 (2.5) Comparison Chart of Models and Marks PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. 1-8-49 MODEL MARK 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 E F G H I J K L M T6450SCM3 Main 4/5 Schematic Diagram VOLTAGE CHART (Power off mode) Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: 1 “ “ = SMD 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. 2 ~ 3 5.0 (2.5) PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. Ref. No. 1 2 3 IC681 3.2 0 1.9 Ref. No. E C B Q681 9.8 5.9 9.7 Q682 0 7.9 0 Q683 0 9.7 0 Q684 0.1 3.1 0 Q685 0 0 0.6 3.1 0 0 Q686 Comparison Chart of Models and Marks 1-8-50 1-8-51 MODEL MARK 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 E F G H I J K L M T6450SCM4 Main 4/5 Schematic Diagram Parts Location Guide Ref No. Position CAPACITORS C101 W-3 C102 W-3 C103 V-4 C104 V-4 C105 V-4 C106 V-4 T-3 C471 T-3 C472 T-3 C473 T-3 C474 U-3 C475 U-3 C476 U-3 C478 U-4 C479 U-4 C480 U-4 C481 U-3 C483 T-4 C484 T-4 C485 T-4 C486 T-1 C681 U-2 C682 T-2 C683 T-2 C684 S-2 C687 U-1 C688 U-2 C691 W-2 C694 CONNECTORS S-2 CL603A S-1 CL604 DIODES T-3 D471 S-1 D681 T-1 D682 U-3 D686 U-2 D687 U-2 D688 U-2 D691 T-2 D694 D695 T-2 T-2 D696 D697 V-2 1-8-52 Ref No. Position ICS IC101 V-4 T-3 T-2 IC471 IC681 COILS T-1 L681 T-2 L682 TRANSISTORS Q681 S-1 T-1 Q682 T-1 Q683 S-2 Q684 U-2 Q685 U-1 Q686 RESISTORS R101 W-3 R102 W-3 R103 W-4 R104 W-4 R106 V-4 R107 W-3 R108 W-3 T-3 R471 S-1 R681 S-1 R682 T-2 R683 U-1 R684 T-1 R685 T-1 R686 T-1 R687 T-2 R689 T-2 R690 S-2 R691 U-2 R692 T-2 R693 T-2 R694 S-2 R695 T-1 R696 W-1 R697 W-1 R698 MISCELLANEOUS CF101 V-3 Main 5/5 Schematic Diagram Parts Location Guide Ref No. Position CAPACITORS BB-2 C703 BB-4 C707 BB-4 C708 BB-4 C709 CC-4 C710 CC-3 C711 CC-3 C713 Z-1 C715 BB-4 C716 BB-1 C719 BB-3 C723 AA-3 C724 CONNECTORS Y-4 CN751 Y-2 CN752 DIODES BB-4 D705 CC-4 D706 BB-4 D707 CC-4 D709 CC-3 D711 AA-3 D712 Z-1 D713 BB-4 D715 CC-3 D716 ICS CC-2 IC701 BB-2 IC702 AA-2 IC703 COILS CC-3 L701 CC-3 L702 TRANSISTORS BB-3 Q701 CC-4 Q702 CC-3 Q703 BB-4 Q704 CC-3 Q705 BB-4 Q706 AA-2 Q707 AA-2 Q708 BB-2 Q709 BB-3 Q710 BB-4 Q711 RESISTORS R701 Y-1 1-8-53 Ref No. Position RESISTORS Y-1 R702 CC-4 R703 CC-4 R704 BB-4 R707 CC-4 R709 BB-4 R710 AA-3 R711 CC-4 R712 CC-4 R714 CC-4 R723 CC-4 R724 CC-4 R725 CC-4 R726 CC-3 R727 BB-4 R728 BB-4 R729 BB-4 R730 CC-3 R731 CC-3 R732 CC-3 R733 CC-3 R737 BB-2 R738 CC-2 R739 AA-2 R740 Z-1 R741 AA-2 R742 AA-2 R743 AA-2 R744 AA-2 R745 AA-2 R746 AA-2 R747 AA-2 R748 CC-2 R749 Y-2 R751 BB-3 R752 Y-2 R753 BB-3 R754 AA-3 R755 BB-4 R756 BB-4 R757 TEST POINT BB-3 TP009 MISCELLANEOUS Y-1 JK701 Y-1 JK702 JK703 CC-4 Main 5/5 Schematic Diagram Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: “ “ = SMD 1 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. 1-8-54 2 ~ 3 5.0 (2.5) Comparison Chart of Models and Marks PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. 1-8-55 MODEL MARK 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 E F G H I J K L M T6450SCM5 H.V./Power Supply 1/2 Schematic Diagram Parts Location Guide CRT Schematic Diagram Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: 1 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. 2 ~ 3 5.0 (2.5) PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. CRT SCHEMATIC DIAGRAM PARTS LOCATION GUIDE Ref No. Position Ref No. Position CAPACITORS TRANSISTORS B-1 B-2 C501 Q502 C-1 C-1 C502 Q503 B-1 RESISTORS C503 C-2 B-2 C504 R501 C-1 B-2 C505 R502 C-2 CONNECTORS R503 A-2 C-2 CL501B R504 C-1 C-2 CN501 R505 A-2 C-2 CN502 R506 C-2 COIL R507 B-2 C-1 L501 R510 TRANSISTORS B-2 R511 Q501 B-2 R512 B-2 Ref No. Position CAPACITORS B-1 C602 A-1 C604 A-2 C611 B-3 C613 A-3 C614 B-2 C615 A-3 C616 C-2 C617 C-2 C618 C-3 C619 C-3 C621 C-3 C622 C-2 C624 C-3 C625 C-3 C626 C-3 C627 D-3 C629 E-3 C630 D-2 C632 D-2 C633 D-1 C634 C-3 C636 CONNECTORS A-2 CN601 E-3 CN602 DIODES B-2 D601 B-2 D602 B-2 D603 B-2 D604 B-2 D605 B-2 D609 B-3 D610 A-2 D612 C-2 D613 C-2 D614 C-2 D615 E-2 D616 C-3 D617 C-3 D618 B-3 D619 C-3 D620 C-1 D622 D623 C-1 C-1 D624 C-1 D625 D626 C-3 Ref No. Position RESISTORS B-1 R513 C-1 R514 B-1 R515 B-1 R516 B-1 R517 C-1 R518 C-1 R519 C-1 R520 B-1 R521 B-1 R522 B-1 R523 MISCELLANEOUS JK501 C-2 T6450SCCRT 1-8-56 1-8-57 Ref No. Position DIODES C-1 D627 D-3 D629 D-3 D630 D-2 D631 D-2 D634 D-2 D635 D-1 D636 D-1 D637 D-2 D638 C-3 D641 D-3 D642 IC B-2 IC601 COILS B-1 L601 C-3 L603 TRANSISTORS A-3 Q602 B-2 Q603 B-2 Q604 D-3 Q605 D-3 Q606 D-2 Q607 D-2 Q608 RESISTORS A-1 R601 B-1 R602 B-1 R603 B-2 R604 B-2 R605 B-3 R611 B-3 R612 A-2 R613 B-2 R615 A-2 R616 A-2 R617 B-2 R618 B-2 R619 B-3 R620 B-3 R621 B-3 R622 B-3 R624 R625 C-2 R626 C-1 B-2 R627 C-3 R628 R631 C-2 Ref No. Position RESISTORS C-2 R632 C-1 R633 C-1 R634 C-2 R635 C-1 R636 C-1 R637 C-2 R638 C-2 R639 D-3 R640 D-3 R641 D-2 R642 D-3 R643 D-3 R644 C-2 R645 D-3 R646 D-3 R647 D-2 R649 D-2 R651 D-3 R652 D-2 R653 C-2 R654 C-1 R655 C-1 R656 D-1 R657 C-2 R658 C-2 R659 D-3 R660 C-1 R661 B-3 R662 D-3 R663 SWITCH SW601 A-1 MISCELLANEOUS A-3 BC602 C-3 BC604 C-3 BC605 A-1 F601 A-2 PS602 A-1 SA601 B-3 T601 A-1 TM601 A-1 TM602 VARIABLE RESISTOR VR601 C-2 H.V./Power Supply 1/2 Schematic Diagram CAUTION ! Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit. If Main Fuse (F601) is blown, check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. Comparison Chart of Models and Marks Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: 1 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. CAUTION 2 ~ 3 5.0 (2.5) PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE FUSE. NOTE : The voltage for parts in hot circuit is measured using hot GND as a common terminal. MODEL MARK 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 E F G H I J K L M VOLTAGE CHART (Power off mode) Ref. No. 1 2 3 4 IC601 13.1 S 12.1 0.2 1.6 G Ref. No. 0 304.0 Ref. No. E C B Q603 0 1.8 0.2 Q604 6.7 12.0 7.3 Q605 10.3 10.3 9.6 Q606 5.9 9.7 6.5 Q607 1.2 0 5.5 0.1 1.2 0.7 Q608 1-8-58 1-8-59 D Q602 1.8 T6450SCP1 H.V./Power Supply 2/2 Schematic Diagram Voltage indications for PLAY and REC modes on the Schematic Diagrams are as shown below: 1 5.0 THE SAME VOLTAGE FOR BOTH PLAY & REC MODES. 2 ~ 3 5.0 (2.5) PLAY MODE REC MODE INDICATES THAT THE VOLTAGE IS NOT CONSISTENT HERE. 1-8-60 H.V./POWER SUPPLY 2/2 SCHEMATIC DIAGRAM PARTS LOCATION GUIDE Ref No. Position Ref No. Position Ref No. Position CAPACITORS CAPACITORS DIODES G-1 H-1 I-2 C551 C570 D558 G-1 I-2 I-1 C552 C572 D560 G-2 H-2 H-2 C553 C575 D562 G-2 J-2 CONNECTORS C554 D563 G-2 CL501A J-2 H-2 C555 D565 G-2 H-3 IC C556 CN551 G-2 J-1 G-3 C558 CN552 IC551 I-3 DIODES COILS C559 I-3 G-2 H-3 C560 D551 L552 C561 H-2 D553 H-2 L553 I-2 H-2 H-2 J-2 C562 D554 L554 I-2 H-2 TRANSISTORS C565 D555 J-2 J-2 I-2 C567 D556 Q551 C569 I-1 D557 J-2 Q553 H-2 Ref No. Position TRANSISTORS H-1 Q554 RESISTORS R550 H-2 G-1 R551 G-1 R552 G-2 R553 G-2 R554 G-1 R555 G-1 R556 R557 G-2 G-2 R558 G-2 R559 H-2 R560 R561 H-2 Ref No. Position RESISTORS H-2 R564 G-2 R565 G-3 R566 G-1 R568 G-2 R569 H-3 R572 H-2 R574 H-2 R576 H-2 R577 R578 H-2 I-2 R579 R580 H-2 I-2 R581 R583 I-1 1-8-61 Ref No. Position RESISTORS J-2 R584 I-1 R585 I-1 R586 I-1 R587 H-1 R588 H-2 R589 J-2 R590 I-2 R591 H-2 R592 R593 J-2 J-2 R594 G-2 R595 G-1 R596 R597 H-2 Ref No. Position RESISTORS H-2 R598 MISCELLANEOUS I-2 BC551 J-3 T551 H-3 T552 TEST POINTS I-2 TP501 I-2 TP502 J-2 TP503 TP504 J-3 T6450SCP2 CRT ANODE VD HD CN501 CN551 1 2 3 4 5 CN601 1 2 T551 FBT CN502 GREEN BLUE RED GND SCREEN 1-10-2 21 19 17 15 13 11 9 7 5 3 1 20 18 16 14 12 10 8 6 4 2 JK703 GND AL+20.5V AL+12V(1) P-DOWN-L AL+5V P-ON-L AL+12V(2) AL+9V GND GND AL+33V P-ON+8V CN602 H-DRIVE FBP V-DRIVE V-RAMP-FB ACL P-SAFETY1 GND CN552 H.V. / POWE R S UPPLY CBA BT6600F01022-A CL501A 1 HEATER 2 GND 3 P-ON+160V CL501B 1 HEATER 2 GND 3 P-ON+160V AC-CORD D.Y. GND FOCUS CRT CBA BT6600F01022-B NOTE FO R WI RE CONNECTORS: 1. PREFIX SYMBOL "CN" MEANS CONNECTOR. (CAN DISCONNECT AND RECONNECT.) 2. PREFIX SYMBOL "CL" MEANS WIRE-SOLDER HOLES OF THE PCB. (WIRE IS SOLDERED DIRECTLY.) 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 4 3 2 1 CL301B 1 CL301A CL603B CN603 1 1 2 2 3 3 4 4 5 5 6 6 7 7 JUNCTION-A CBA 8 8 BT6600F01012 9 9 10 10 11 11 12 12 7 1 2 3 4 5 6 7 8 9 10 11 12 GND AL+20.5V AL+12V(1) P-DOWN-L AL+5V P-ON-L AL+12V(2) AL+9V GND GND AL+33V P-ON+8V CL603A H-DRIVE FBP V-DRIVE V-RAMP-FB ACL P-SAFETY1 7 GND CL302A CL604 1 2 3 4 5 INT.MONITOR I2C-OPEN GND SDA SCL CN303 BT6600F01012 MAIN CBA (NO CONNECTION) CN303 IS USED FOR ADJUSTMENT AT FACTORY GREEN BLUE RED GND 7 1 2 3 4 1 2 3 4 5 6 TOP COVER SENSOR CBA (ST-SENSOR) BHF300F01011-A,B SENSOR CBA (END-SENSOR) BHF300F01011-A,B 4 JUNCTION-C CBA 2 BT6600F01012 3 CN301 CN302 CL302B 1 1 2 2 JUNCTION-B CBA 3 3 BT6600F01012 4 4 5 5 6 6 1 2 3 4 1 2 CN752 1 2 3 4 5 6 CN751 1 2 3 4 5 6 7 8 SP151 SPEAKER E F G H I Mark Model 14PV385/01 14PV135/58 14PV235/58 14PV385/39 CAPSTAN MOTOR P-SAFETY 2 OSD-BLK OSD-R OSD-B PROTECT OSD-G CN902 1 2 3 4 5 6 VIDEO (L) HEAD VIDEO (R) HEAD DRUM MOTOR FULL ERASE HEAD FE HEAD AC HEAD ASSEMBLY AUDIO ERASE HEAD AUDIO HEAD CONTROL HEAD M PG SENSOR CYLINDER ASSEMBLY LOADING MOTOR TEXT CBA BT6400F01032 M WIRING DIAGRAM FO R SE CTION 2 (DECK MECHANISM) CL801 F,G,I, CN901 J,L,M V-SYNC 1 H-SYNC 2 SCL 3 SDA 4 Y-SW-OUT 5 GND 6 AL+9V 7 TEXT-RESET 8 1 2 FE-H FE-H-GND CL403 1 2 3 4 5 6 1 2 3 2 3 4 5 6 7 8 9 10 11 12 CTL(-) CTL(+) A-PB/REC A-COM AE-H/FE-H AE-H CL402 V(R) V-COM V(L) CL401 P-ON+5V(3) C-FG C-F/R C-CONT FG-GND LD-CONT D-CONT D-PFG M-GND AL+12V(1) VG CM+12V/+20.5V 1 CN201 CN804 SP SP-GND 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 Model J K L M Mark Comparison Chart of Models & Marks [ 14PV135/ ( 01, 07, 58 ), 14PV235/ ( 01, 07, 58 ), 14PV385/ ( 01, 07, 39 ) ] WIRING DIAGRAM T6450WI SYSTEM CONTROL TIMING CHARTS [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58) ] Chart 1 EJ POWER -OFF 0.2S ST-S "OFF" CASS.LOAD CL SB LD-FWD 0.2S SB 0.2S STOP(B) POWER 0.2S LD-FWD 1.2S after channel setting +100mS(NTSC) +620mS(PAL) TL 0.2S FB TL 0.2S 0.4S STOP 0.2S SM SF LD-FWD 0.2S 0.2S LD-FWD SF SM AL AU LD-REV 0.5S SM 40mS 0.4S AU LD-REV 20mS 0.2S STOP(A) AL AU 0.2S 0.2S PLAY 0.8S 0.3S PLAY SS LD-FWD REW RS RS 0.3S RS1(RS2) 0.2S AL SS AU LD-REV FF FS LD-FWD AL 1.0S FS1(FS2) PLAY PLAY PLAY >5.0S 5.0S SP MODE LP/SLP MODE NOISE CANCEL STILL 1.0S NTSC 80mS 6mS 240mS 6mS PAL 80mS 6mS 160mS 6mS PAUSE PLAY SM 0.8S STOP(A) STOP 40mS 0.4S AU LD-REV STOP /EJECT 0.12S 0.3S PLAY PLAY 20mS 0.2S 1. EJECT (POWER OFF) -> CASSETTE IN (POWER ON) -> STOP(B) -> STOP(A) -> PLAY -> RS -> FS -> PLAY -> STILL(N-CANCEL) -> PLAY -> STOP(A) PIN NO. 1 LD-SW CL/SS EJ AU RS SF SM TL FB AL SB 82 LD-CONT ON ON "Z" C-DRIVE 66 C-F/R DRUM ROTATION 31 P-ON 65 A-MUTE-H D-PB-H 44 D-REC-H DISPLAY NOISE CANCEL PAUSE OFF STILL PAUSE ON STILL PAUSE ON PAUSE OFF STILL PLAY LD-FWD REC SFT-SW LD-REV T6450TI 1-11-3 EJECT Chart 2 SM FB SM SF LD-FWD FF SF REV 1.0S AU SM STOP 0.4S LD-REV 40mS SM AL AU 0.5S LD-FWD STOP(A) LD-REV SF TL FB REW 20mS 0.2S 0.2S FB SM SF LD-FWD REW SF LD-FWD LD-REV 40mS 0.4S SM AL AU SM AU 0.5S STOP 0.2S STOP(A) REC AU AL 0.2S 1.0S 20mS LD-FWD REC LD-FWD SS RS 2.5S Short REV LD-REV AL AU SS 0.2S REC PAUSE LD-FWD AL 1.2S 1.5S SS RS REC PAUSE REC or PAUSE REC STOP /EJECT LD-FWD REC LD-REV AU SM 1.5S(NTSC) 1.0S(PAL) 0.4S AL 0.2S LD-FWD 0.5S AL AU SS LD-REV 40mS 20mS SB 0.2S LD-REV LD-REV FB TL SF STOP /EJECT 0.2S STOP(A) STOP 0.5S 0.2S 0.5S 0.1S CL EJ EJECT ST-S "ON" CASS. UNLD STOP /EJECT 0.2S REW LD-REV 1.0S STOP /EJECT 0.2S FF SF TL FB 0.2S REC PAUSE 2. STOP(A) -> FF -> STOP(A) -> REW -> STOP(A) -> REC -> PAUSE -> PAUSE or REC -> STOP(A) -> EJECT PIN NO. 1 LD-SW CL/SS EJ AU RS SF SM TL FB AL SB 82 LD-CONT ON ON "Z" C-DRIVE 66 C-F/R DRUM ROTATION 31 P-ON 65 A-MUTE-H D-PB-H 44 D-REC-H DISPLAY FF LD-REV T6450TI 1-11-4 STOP(A) STOP [ 14PV385/ (01, 07, 39) ] Chart 1 EJ POWER -OFF 0.2S ST-S/ END-S "OFF" CL SB CASS.LOAD TL 0.2S SB LD-REV 0.2S 0.2S 0.7S LD-FWD 1.2S 0.2S 620mS (after selecting channel) LD-FWD FB TL 0.2S STOP 0.4S SF 0.2S SM LD-FWD AU AL 0.5S SM 40mS 0.4S AU LD-REV 20mS 0.2S STOP(A) AL AU 0.2S 0.2S PLAY 0.8S 0.3S PLAY SS LD-FWD REW RS RS 0.3S RS 0.2S AL SS AU LD-REV FF FS LD-FWD AL 1.0S FS PLAY PLAY PLAY PAUSE >5.0S 5.0S NOISE CANCEL STILL 1.0S 80mS 6mS 160mS 6mS STILL PLAY 0.3S 0.2S PLAY STOP(A) STOP 0.8S 40mS AU SM LD-REV 0.4S STOP /EJECT PLAY PAUSE OFF SP MODE LP/SLP MODE STILL PAUSE ON 1. EJECT (POWER OFF) -> CASSETTE IN (POWER ON) -> STOP(B) -> STOP(A) -> PLAY -> RS -> FS -> PLAY -> STILL -> PLAY -> STOP(A) PIN NO. 9 LD-SW CL/SS EJ AU RS SF SM TL FB AL SB 81 LD-CONT "M" /REV ON ON "Z" C-DRIVE 78 C-F/R DRUM ROTATION 67 P-ON 20 A-MUTE-H REC YCA DATA EE PB 47 D-REC-H DISPLAY NOISE CANCEL PAUSE ON PAUSE OFF STILL PLAY LD-FWD 0.2S 20mS T6450TI 1-11-5 EJECT Chart 2 SM SF FB FF 0.2S LD-FWD SF SM LD-FWD 2.5S FF LD-FWD AU LD-REV 40mS AU SM 0.4S AL 0.5S STOP STOP(A) LD-REV SF FB REW 20mS 0.2S 0.2S SF 0.2S LD-FWD REW SM LD-FWD 2.5S STOP /EJECT REW STOP /EJECT LD-FWD LD-REV STOP 40mS 0.4S AL AU SM AU 0.5S REC AL 0.2S AU LD-FWD REC 1.0S 20mS 0.2S STOP(A) REC 2.5S Short REV LD-REV AL AU SS 0.2S REC PAUSE SS RS LD-FWD PAUSE AL LD-FWD REC 1.2S 1.0S SS RS REC PAUSE REC or PAUSE REC STOP /EJECT LD-FWD 2. STOP(A) -> FF -> STOP(A) -> REW -> STOP(A) -> REC -> PAUSE -> PAUSE or REC -> STOP(A) -> EJECT PIN NO. 9 LD-SW CL/SS EJ AU RS SF SM TL FB AL SB /REV 81 LD-CONT "M" ON ON "Z" C-DRIVE 78 C-F/R DRUM ROTATION 67 P-ON 20 A-MUTE-H REC YCA DATA EE PB 47 D-REC-H DISPLAY 0.2S LD-REV LD-REV AU SM 0.4S AL 0.2S LD-FWD 0.5S AL AU SS LD-REV 40mS LD-REV 20mS SB 0.2S LD-REV FB TL SF STOP /EJECT 0.2S STOP(A) STOP 0.5S 0.2S 0.5S 0.1S CASS. UNLD ST-S/ END-S EJECT "ON" CL EJ T6450TI 1-11-6 FF STOP(A) STOP IC PIN FUNCTION DESCRIPTIONS [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ] Comparison Chart of Models and Marks Model 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 Pin IN/ Mark No. OUT Mark E F G H I J K L M 19 - NU OUT A-MUTE-H 20 21 22 Signal Name E,F,H ,I,K,L Pin IN/ Mark No. OUT 1 E,F,H ,I,K,L - G,J, M IN Signal Name NU AFC2 Function Not Used IN P-SAFETY 2 Power Supply Failure Detection 2 3 IN P-SAFETY 1 Power Supply Failure Detection 1 4 IN END-SENS End-Sensor Audio Mute Control Signal (Mute = “H”) NU Not Used - NU Not Used G,J, OUT 1ST-SND-H M Tuner 1 and Tuner 2 Switching Signal 23 OUT REC-LED Recording LED Control Signal 24 OUT REC-LED Recording LED Control Signal 25 - NU Not Used 26 - NU Not Used 27 - NU Not Used 28 - NU Not Used 29 OUT SCARTMUTE RAPID-Switch Input Signal from Scart Jack 30 - NU Not Used 31 IN RECSAFETY Record Protection Tab Detection NU Not Used SECAM-H SECAM Mode at High NU Not Used AFC 2 of Tuner 2 2 Not Used - IC 201 (TV/VCR Micro Controller) “H” ≥ 4.5V, “L” ≤ 1.0V Function E,F,G ,H,I,J 32 ,K,L - M IN 5 IN AFC Automatic Frequency Control Signal 6 IN V-ENV Video Envelope Input 7 IN KEY-1 Key 1 Input 8 IN KEY-2 Key 2 Input 9 IN LD-SW Loading Switch Input 10 IN ST-SENS Start-Sensor 11 - NU Not Used 34 IN RESET System Reset Signal (Reset=”L”) 12 - NU Not Used 35 IN XCIN Sub Clock 32 kHz Artificial V-Sync Output 36 13 14 IN/ DV SYNC OUT IN REMOTE OUT C-ROTA Color Phase Rotary Changeover SIgnal 16 OUT H-A-SW Video Head Amp Switching Pulse 18 - NU OUT RF-SW M Remote Signal Input 15 17 33 E,F,G ,H,I,J ,K,L - IN/ TRICK-H OUT OUT XCOUT 37 - 38 IN 39 40 Vcc XIN Main Clock Input GND GND OUT SPOT-KILL Counter-measure for Spot 42 OUT EXT-L External Input or Playback = Output 43 1-12-3 Main Clock Output 41 Not Used Video Head Switching Pulse Sub Clock 32 kHz TIMER+5V OUT XOUT - Special Playback = “H” in SECAM Mode IN CLKSEL Clock Select (GND) T6450PIN Pin IN/ Mark No. OUT 44 45 46 Signal Name Function OUT SP-MUTE Speaker Mute Signal IN/ I2C-OPEN OUT White Balance Adjust Mode Judgment 73 - GND 74 IN OUT D-REC-H Delayed Record Signal 75 - 76 OUT C-CONT OUT SCART-H Switching Signal of Scart Jack and RCA Jack Capstan Motor Control Signal 77 OUT D-CONT Drum Motor Control Signal OUT C-F/R Capstan Motor FWD/REV Control Signal (FWD=”L”/ REV=”H”) - 47 48 GND 49 - OSD-GND OSD GND 50 - NU Not Used 51 - NU Not Used 52 - NU Not Used 53 - OSDVcc OSDVcc 54 - HLF HLF - NU Not Used 55 E,H, K Pin IN/ Mark No. OUT IN/ SDA OUT 72 78 79 E,F,H ,I,K,L - G,J, M 80 F,G,I, OUT TEXT-RESET Tele Text Reset J,L,M - GND GND 82 58 IN H-SYNC H-SYNC Input 59 IN V-SYNC V-SYNC Input E,F,H ,I,K,L 83 ,M RGB Control Signal 62 OUT OSD-B Blue Output 63 OUT OSD-G Green Output 64 OUT OSD-R Red Output 65 66 67 IN E,F,H ,I,K,L - 69 - 70 71 NU Not Used NU Not Used IN S-REEL Supply Reel Rotation Signal IN T-REEL Take Up Reel Rotation Signal G,J IN NU Not Used DAV-L VPS/PDC Data Receive = “L” NU Not Used P-DOWN-L Power Voltage Down Detector Signal at Low NU Not Used C-FG Capstan Motor Rotation Detection Pulse - 85 IN 86 - 87 IN 88 - AMPVss AMPVss (GND) 89 - NU Not Used Power On Signal at High 90 IN D-PFG SLOW-SW-IN Slow Switch Input Signal Drum Motor Phase/ Frequency Generator 91 OUT NU Not Used AMP VREFOUT Standard Voltage Output 92 IN AMP VREFIN Standard Voltage Input 93 - C C Terminal RAPIT-SW-IN NU OUT P-ON-H IN C-Sync Input 84 G,J, OUT C-POWERSW M 68 C-SYNC Teletext Control Signal 57 OUT RGB-CONT Not Used OUT TEXT-L Video Signal Input 61 NU Loading Motor Control Signal CV-IN Output for Picture Cut off E2PROM/ CHROMA IC Tuner Communication Data IN/ LD-CONT OUT IN OUT OSD-BLK Function 81 56 60 Signal Name RAPID-Switch Input Signal Not Used Capstan Power Switching Signal OUT TEXT-IN-H Tele Text Input Signal at High OUT SCL E2PROM/ CHROMA IC Tuner Communication Clock 1-12-4 94 IN/ CTL (-) OUT CTL (-) 95 IN/ CTL (+) OUT CTL (+) T6450PIN Pin IN/ Mark No. OUT 96 - 97 OUT 98 - Signal Name Function AMPC AMPC CTL AMPOUT Control Amp Output AMPVcc AMPVcc 99 - AVcc A/D Converter Power Input/ Standard Voltage Input 100 IN AGC Tuner IF Output Signal 1-12-5 T6450PIN LEAD IDENTIFICATIONS [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ] MID-32A22F PT204-6B-12 2SK2647 LC74793JM-TRM 2SC5884000RF 2SD1913(R) KTC2026Y TT2084LS-YB11 TT2138LS-YB11 S: Souce D: Drain G: Gate B C E S D G E: Emitter C: Collector B: Base E C B KA7805A KIA7805API CD4053BCSJX CD4053BNSR TC4053BF(N) 9 16 8 1 12 2SC1815-GR(TPE2) 2SC2120-O(TPE2) 2SC2120-Y(TPE2) 2SC3331(T,U) KTC3203(Y) KTC3207 2SA1015-GR(TPE2) 2SA950(Y,O) 2SD2627LS-FEC-YB11 KTA1271(Y) KTC3198(GR) 2SC2482TPE6 2SC3468(E)-AE 2SB892(S) E C B PS2561L1-1-VL PS2561L1-1-VW LA71750EM-MPB-E M3776AMCA-BA3GP M3776AMFA-BA4GP A C K E LA70100M-MPB 1 13 E 2SA1346 KRA103M KTA1266(GR) 2SA1175(F) 2SC1627Y-TPE2 2SC2785(F,H,J) BN1F4M-T KTA1267(GR) KTC3199(GR) KRC103M BA1F4M-T 2SC3400 LA78040A IN G OUT C 24 81 50 100 31 16 30 IN G OUT 5 AT24C04N-10SC BR24C04F BR24C04F-W BR24L04F-WE2 CAT24WC04JI M24C04-MN6 M24C04-WMN6 M61209BFP 48 15 1 8 5 1 4 33 32 49 SAA5265 52 1 30 1 LA4224 8 51 80 17 27 64 4 1 1 1-13-2 16 26 T6450LE PRODUCT SAFETY NOTE: Products marked with a h have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don’t degrade the safety of the product through improper servicing. NOTES: 1-14-17 14PV385/07 14PV385/39 MMA CBA Consists of the following MAIN CBA JUNCTION A CBA JUNCTION B CBA JUNCTION C CBA SENSOR CBA POWER CBA CRT CBA MAIN CBA CAPACITORS CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 47UF/25V M CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 1UF/50V M ELECTROLYTIC CAP. 1UF/50V M PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 FILM CAP.(P) 0.056UF/50V J ELECTROLYTIC CAP. 4.7UF/50V M H7 CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 47UF/6.3V M H7 ELECTROLYTIC CAP. 1UF/50V M H7 ELECTROLYTIC CAP. 1UF/50V M H7 ELECTROLYTIC CAP. 330UF/16V M CERAMIC CAP.(AX) X M 2200PF/16V ELECTROLYTIC CAP. 470UF/16V M ELECTROLYTIC CAP. 0.22UF/50V M H7 CHIP CERAMIC CAP.(1608) B K 4700PF/50V ELECTROLYTIC CAP. 10UF/25V M H7 CHIP CERAMIC CAP.(1608) CH J 270PF/50V CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 1UF/50V M H7 CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V CHIP CERAMIC CAP.(1608) CH J 22PF/50V CHIP CERAMIC CAP.(1608) CH J 22PF/50V ELECTROLYTIC CAP. 47UF/6.3V M H7 CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 47UF/6.3V M H7 ELECTROLYTIC CAP. 330UF/6.3V M CHIP CERAMIC CAP. CH D 10PF/50V 14PV385/01 Description 14PV235/58 C001 C002 C005 C006 C008 C009 C014 C101 C102 C103 C104 C105 C106 C151 C152 C154 C155 C156 C157 C160 C203 C205 C207 C208 C209 C210 C211 C212 C213 C214 C217 h 12 NC 14PV235/07 Pos. 14PV235/01 ELECTRICAL PARTS LIST 14PV135/58 F…..±1% K…..±10% Z…..+80/-20% 14PV135/07 D…..±0.5% J…..±5% N…..±30% 14PV135/01 C…..±0.25% G…..±2% M…..±20% 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-14-18 14PV235/07 14PV235/58 14PV385/01 14PV385/07 14PV385/39 CHIP CERAMIC CAP. CH D 10PF/50V ELECTROLYTIC CAP. 47UF/6.3V M H7 CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V CHIP CERAMIC CAP.(MELF) Y K 4700PF/16V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP. CH J 560PF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP. CH D 10PF/50V CHIP CERAMIC CAP. CH D 10PF/50V CHIP CERAMIC CAP.(MELF) Y K 4700PF/16V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V 9965 000 09764 CHIP CERAMIC CAP.(MELF) Y K 1000PF/35V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 47UF/6.3V M H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 47UF/6.3V M H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP. CH J 560PF/50V CHIP CERAMIC CAP.(MELF) Y K 4700PF/16V ELECTROLYTIC CAP. 22UF/50V M CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 47UF/6.3V M H7 CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 47UF/6.3V M H7 ELECTROLYTIC CAP. 47UF/6.3V M H7 CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP. CH J 560PF/50V CHIP CERAMIC CAP. CH J 560PF/50V ELECTROLYTIC CAP. 10UF/25V M H7 CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V ELECTROLYTIC CAP. 470UF/6.3V M CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 1UF/50V M CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V FILM CAP.(P) 0.1UF/50V J CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 470UF/6.3V M CHIP CERAMIC CAP.(MELF) B K 180PF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 1UF/50V M CHIP CERAMIC CAP. CH J 150PF/50V ELECTROLYTIC CAP. 1UF/50V M ELECTROLYTIC CAP. 1UF/50V M CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 1UF/50V M ELECTROLYTIC CAP. 470UF/10V M ELECTROLYTIC CAP. 47UF/25V M CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V MYLAR CAP. 0.22UF/50V J ELECTROLYTIC CAP. 1UF/50V M CHIP CERAMIC CAP.(1608) B K 0.01UF/50V MYLAR CAP. 0.22UF/50V J CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V 14PV235/01 h Description 14PV135/58 h 12 NC 14PV135/07 Pos. C218 C221 C222 C223 C224 C225 C226 C227 C228 C229 C230 C231 C233 C234 C235 C236 C237 C238 C239 C240 C241 C242 C243 C244 C245 C248 C253 C254 C255 C256 C301 C302 C303 C304 C305 C307 C308 C309 C310 C311 C312 C313 C314 C315 C316 C317 C318 C319 C320 C321 C322 C323 C324 C325 C326 C327 C328 C330 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-14-19 14PV235/07 14PV235/58 14PV385/01 14PV385/07 14PV385/39 ELECTROLYTIC CAP. 47UF/10V M CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 47UF/10V M CHIP CERAMIC CAP.(MELF) Y K 1000PF/35V CHIP CERAMIC CAP.(MELF) B K 180PF/50V CHIP CERAMIC CAP.(MELF) F Z 0.01UF/16V CHIP CERAMIC CAP.(MELF) Y K 1000PF/35V ELECTROLYTIC CAP. 220UF/10V M CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 1UF/50V M H7 ELECTROLYTIC CAP. 1UF/50V M H7 ELECTROLYTIC CAP. 100UF/6.3V H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 1UF/50V M H7 CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 47UF/6.3V M H7 ELECTROLYTIC CAP. 1UF/50V M H7 ELECTROLYTIC CAP. 1UF/50V M H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 10UF/25V M H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP. CH J 68PF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 47UF/25V M CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 1UF/50V M H7 ELECTROLYTIC CAP. 10UF/25V M H7 ELECTROLYTIC CAP. 22UF/16V M H7 ELECTROLYTIC CAP. 1UF/50V M H7 CHIP CERAMIC CAP. CH J 120PF/50V CHIP CERAMIC CAP. CH J 220PF/50V ELECTROLYTIC CAP. 1UF/50V M H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 1UF/50V M H7 CHIP CERAMIC CAP. B K 2200PF/50V ELECTROLYTIC CAP. 10UF/25V M H7 CHIP CERAMIC CAP. CH J 68PF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V 14PV235/01 Description 14PV135/58 h 12 NC 14PV135/07 Pos. C331 C332 C333 C334 C336 C338 C340 C341 C344 C350 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412 C413 C414 C415 C416 C417 C418 C419 C420 C421 C422 C424 C425 C426 C427 C430 C431 C432 C433 C434 C435 C436 C438 C440 C441 C442 C443 C444 C445 C452 C471 C472 C473 C474 C475 C476 C478 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 CL301A CL302A CL603A CL604 CN201 h 9965 000 24177 9965 000 13835 9965 000 13836 9965 000 24178 9965 000 24179 9965 000 18088 9965 000 13840 CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 0.47UF/50V M H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP. CH J 820PF/50V CHIP CERAMIC CAP. CH J 820PF/50V ELECTROLYTIC CAP. 2.2UF/50V M H7 ELECTROLYTIC CAP. 220UF/16V M ELECTROLYTIC CAP. 220UF/16V M ELECTROLYTIC CAP. 10UF/50V M CHIP CERAMIC CAP.(MELF) B K 180PF/50V ELECTROLYTIC CAP. 47UF/25V M ELECTROLYTIC CAP. 47UF/25V M ELECTROLYTIC CAP. 2.2UF/50V M ELECTROLYTIC CAP. 100UF/10V M ELECTROLYTIC CAP. 4.7UF/50V M ELECTROLYTIC CAP. 0.22UF/50V M ELECTROLYTIC CAP. 0.47UF/50V M ELECTROLYTIC CAP. 0.47UF/50V M ELECTROLYTIC CAP. 0.47UF/50V M ELECTROLYTIC CAP. 470UF/10V M PCB JUMPER D0.6-P5.0 ELECTROLYTIC CAP. 4.7UF/50V M CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V ELECTROLYTIC CAP. 1UF/50V M CHIP CERAMIC CAP.(MELF) Y K 1000PF/35V ELECTROLYTIC CAP. 47UF/10V M ELECTROLYTIC CAP. 47UF/6.3V M H7 ELECTROLYTIC CAP. 220UF/6.3V M H7 CERAMIC CAP. B K 470PF/100V FILM CAP.(P) 0.018UF/100V J CHIP CERAMIC CAP. B K 1500PF/50V CHIP CERAMIC CAP.(MELF) SL J 33PF/50V PCB JUMPER D0.6-P5.0 ELECTROLYTIC CAP. 22UF/50V M CERAMIC CAP.(AX) X M 1800PF/16V ELECTROLYTIC CAP. 10UF/25V M H7 CHIP CERAMIC CAP.(1608) B K 0.01UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) B K 0.022UF/50V ELECTROLYTIC CAP. 33UF/10V H7 ELECTROLYTIC CAP. 4.7UF/50V M H7 CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP.(MELF) B K 180PF/50V ELECTROLYTIC CAP. 1UF/50V M H7 CHIP CERAMIC CAP.(MELF) B K 150PF/50V CHIP CERAMIC CAP.(1608) F Z 0.1UF/50V CHIP CERAMIC CAP. CH J 220PF/50V CHIP CERAMIC CAP.(1608) B K 0.01UF/50V ELECTROLYTIC CAP. 100UF/6.3V H7 CERAMIC RESONATOR 4.433MHZ CONNECTORS LEAD WIRE 4P/300 LEAD WIRE 7P/190 LEAD WIRE 12P/190 WIRE ASSEMBLY 1P/45 FFC/FPC CONNECTOR, 12P 04 6232 112 103 800 1-14-20 14PV385/39 14PV385/07 14PV385/01 14PV235/58 14PV235/07 Description 14PV235/01 h 12 NC 14PV135/58 Pos. C479 C480 C481 C483 C484 C485 C486 C681 C682 C683 C684 C687 C688 C691 C694 C703 C707 C708 C709 C710 C711 C713 C715 C716 C719 C723 C724 C851 C855 C856 C857 C858 C859 C860 C860 C861 C862 C863 C864 C865 C866 C867 C869 C870 C871 C872 C873 C874 C875 C876 C877 CF101 14PV135/07 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 h h h h h h h h h h h h h h h 9965 000 13847 4822 130 32778 4822 130 32778 4822 130 32778 4822 130 32778 9965 000 18091 9965 000 23556 9965 000 13882 9965 000 24180 9965 000 23556 9965 000 12904 9965 000 23556 9965 000 23556 4822 130 33948 4822 130 32778 4822 130 32778 4822 130 32778 9965 000 18091 9965 000 12198 9965 000 13853 9965 000 24181 9965 000 24201 9965 000 13030 9965 000 18093 9965 000 12180 9965 000 12255 9965 000 13851 9965 000 13852 9965 000 13852 9965 000 13852 1-14-21 14PV385/39 4822 130 32778 4822 130 32778 4822 130 32778 4822 130 32778 4822 130 32778 4822 130 32778 4822 130 32778 4822 130 32778 9965 000 11153 4822 130 32778 4822 130 32778 9965 000 09896 14PV385/07 h h 9965 000 13848 4822 130 32778 9965 000 05250 9965 000 13846 9965 000 13846 4822 130 33948 14PV385/01 IC101 IC151 IC201 IC201 IC202 IC301 IC401 IC471 IC681 IC701 IC702 IC703 h 14PV235/58 h 14PV235/07 D151 D152 D201 D202 D204 D205 D206 D210 D211 D212 D213 D214 D302 D303 D304 D305 D306 D401 D402 D471 D681 D682 D682 D686 D687 D688 D691 D694 D695 D696 D697 D705 D706 D707 D709 D711 D712 D713 D715 D716 Description CONNECTOR BASE, 5P TUC-P05P-B1 CONNECTOR BASE, 8P TUC-P08P-B1 CONNECTOR BASE, 6P TUC-P06P-B1 STRAIGHT CONNECTOR BASE 00 8283 0212 00 000 DIODES ZENER DIODE MTZJT-777.5B SWITCHING DIODE 1SS133(T-77) LED SIR-563ST3F P LED(RED) L-1513EC LED(RED) L-1513EC ZENER DIODE MTZJT-775.6B PCB JUMPER D0.6-P5.0 SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) ZENER DIODE MTZJT-778.2B SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) CARBON RES. 1/4W J 10K OHM PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P10.0 PCB JUMPER D0.6-P10.0 DIODE 1N5397-B SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) ZENER DIODE MTZJT-7715B ZENER DIODE MTZJT-776.8B ZENER DIODE MTZJT-7718B ZENER DIODE MTZJT-779.1B ZENER DIODE MTZJT-776.8B ZENER DIODE DZ-5.1BSBT265 ZENER DIODE MTZJT-776.8B ZENER DIODE MTZJT-776.8B ZENER DIODE MTZJT-775.6B SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) ZENER DIODE MTZJT-7715B IC’s IC:VPS/PDC SLICER LC74793JM-TRM AUDIO AMP LA4224 MICRO COMPUTER M3776AMCA-BA3GP MICRO COMPUTER M3776AMFA-BA4GP IC:MEMORY BR24C04F-W IC:CHROMA/IF 1 CHIP M61209BFP IC:Y/C/A LA71750EM-MPB-E IC:SECAM LA70100M-MPB VOLTAGE REGULATOR KIA7805API IC:SWITCH TC4053BF(N) IC:SWITCH TC4053BF(N) IC:SWITCH TC4053BF(N) 14PV235/01 9965 000 13841 9965 000 13842 9965 000 13843 9965 000 13844 14PV135/58 h 12 NC 14PV135/07 Pos. CN303 CN751 CN752 CN804 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 h h 9965 000 05643 9965 000 05643 9965 000 05643 9965 000 05643 9965 000 05643 4822 130 42959 4822 130 10145 4822 130 10097 4822 130 10097 4822 130 42959 4822 130 42292 9965 000 05643 h 9965 000 24182 1-14-22 14PV385/39 h 9965 000 05643 9965 000 20922 9965 000 20922 4822 130 10145 4822 130 42959 9965 000 13862 9965 000 05643 9965 000 23377 4822 130 42292 9965 000 05643 9965 000 13863 9965 000 05643 9965 000 05643 4822 130 42959 4822 130 10145 14PV385/07 9965 000 05705 9965 000 18095 14PV385/01 9965 000 13860 14PV235/58 R003 R004 R101 R102 R103 R104 R106 R107 R108 R151 9965 000 13858 4822 157 10649 14PV235/07 Q204 Q205 Q205 Q206 Q401 Q681 Q682 Q683 Q684 Q685 Q686 Q701 Q702 Q703 Q704 Q705 Q706 Q707 Q708 Q709 Q710 Q711 Q851 Q852 Q853 Q854 Q855 Q856 9965 000 18094 9965 000 13856 9965 000 13857 9965 000 13858 COILS PCB JUMPER D0.6-P5.0 INDUCTOR 1.8UH-J-26T INDUCTOR 1.0UH-J-26T INDUCTOR 0.10UH-K-26T INDUCTOR 33UH-J-26T PCB JUMPER D0.6-P7.5 PCB JUMPER D0.6-P7.5 PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 INDUCTOR 33UH-J-26T INDUCTOR 100UH-J-26T PCB JUMPER D0.6-P7.5 PCB JUMPER D0.6-P7.5 INDUCTOR 12UH-J-26T PCB JUMPER D0.6-P5.0 INDUCTOR 47UH-K-5FT INDUCTOR 0.22UH-K-26T TRANSISTORS TRANSISTOR 2SC2785(F) PHOTO TRANSISTOR MID-32A22F PHOTO TRANSISTOR MID-32A22F RES. BUILT-IN TRANSISTOR KRA103M TRANSISTOR KTA1266(GR) TRANSISTOR 2SB892(S) TRANSISTOR 2SC2785(F) RES. BUILT-IN TRANSISTOR KRC103M TRANSISTOR 2SC2120-Y(TPE2) TRANSISTOR 2SC2785(F) TRANSISTOR 2SD1913(R) TRANSISTOR 2SC2785(F) TRANSISTOR 2SC2785(F) TRANSISTOR KTA1266(GR) RES. BUILT-IN TRANSISTOR KRA103M PCB JUMPER D0.6-P5.0 TRANSISTOR 2SC2785(F) TRANSISTOR 2SC2785(F) TRANSISTOR 2SC2785(F) TRANSISTOR 2SC2785(F) TRANSISTOR 2SC2785(F) TRANSISTOR KTA1266(GR) RES. BUILT-IN TRANSISTOR KRA103M TRANSISTOR 2SC3331(T) TRANSISTOR 2SC3331(T) TRANSISTOR KTA1266(GR) TRANSISTOR 2SC2120-Y(TPE2) TRANSISTOR 2SC2785(F) RESISTORS PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 2.7K OHM CHIP RES.(1608) 1/10W J 5.6K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 100 OHM METAL OXIDE FILM RES. 1W J 12 OHM 14PV235/01 L001 L151 L152 L201 L302 L303 L304 L305 L401 L402 L403 L681 L682 L701 L702 L852 L854 Description 14PV135/58 h 12 NC 14PV135/07 Pos. 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-14-23 14PV235/07 14PV235/58 14PV385/01 14PV385/07 14PV385/39 Description 9965 000 09940 CHIP RES.(1608) 1/10W J 5.6K OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 5.6K OHM CARBON RES. 1/4W J 47 OHM CARBON RES. 1/4W J 47 OHM CARBON RES. 1/4W J 10 OHM CARBON RES. 1/4W J 1K OHM CHIP RES.(1608) 1/10W J 22K OHM CARBON RES. 1/4W J 1K OHM CHIP RES.(1608) 1/10W J 22K OHM CARBON RES. 1/4W J 1K OHM CHIP RES.(1608) 1/10W J 390K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 1.5K OHM CARBON RES. 1/4W G 4.7K OHM CHIP RES.(1608) 1/10W J 2.2K OHM CHIP RES.(1608) 1/10W J 2.7K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 2.2K OHM CHIP RES.(1608) 1/10W J 2.7K OHM CHIP RES.(1608) 1/10W J 560 OHM CARBON RES. 1/4W J 1K OHM CHIP RES.(1608) 1/10W J 390K OHM CARBON RES. 1/4W J 270 OHM CARBON RES. 1/4W J 1K OHM CHIP RES.(1608) 1/10W J 680 OHM CHIP RES.(1608) 1/10W J 680 OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 47 OHM CHIP RES.(1608) 1/10W J 100K OHM CHIP RES.(1608) 1/10W J 2.2K OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 330K OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W J 560 OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W J 470 OHM CHIP RES.(1608) 1/10W J 1M OHM CHIP RES.(1608) 1/10W J 100 OHM PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 CHIP RES.(1608) 1/10W J 220 OHM CHIP RES.(1608) 1/10W J 220 OHM CHIP RES.(1608) 1/10W J 39K OHM CHIP RES.(1608) 1/10W J 220K OHM CARBON RES. 1/4W J 1K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 33K OHM CHIP RES.(1608) 1/10W J 33K OHM CARBON RES. 1/4W J 180 OHM CHIP RES.(1608) 1/10W J 100K OHM CHIP RES.(1608) 1/10W J 680 OHM CHIP RES.(1608) 1/10W J 1.8K OHM CARBON RES. 1/4W J 6.8K OHM 14PV235/01 h 14PV135/58 h 12 NC 14PV135/07 Pos. R152 R153 R154 R155 R156 R157 R201 R202 R203 R204 R205 R206 R207 R208 R209 R210 R211 R212 R213 R214 R215 R216 R217 R218 R219 R220 R221 R222 R223 R224 R226 R227 R228 R229 R230 R231 R232 R233 R234 R235 R236 R237 R238 R239 R240 R241 R242 R243 R244 R248 R249 R250 R251 R252 R254 R255 R256 R257 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Description 14PV135/01 14PV135/07 14PV135/58 14PV235/01 14PV235/07 14PV235/58 14PV385/01 14PV385/07 14PV385/39 CARBON RES. 1/4W J 47K OHM PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W G 1.5K OHM CARBON RES. 1/4W G 22K OHM CARBON RES. 1/4W G 470 OHM CARBON RES. 1/4W G 10K OHM CARBON RES. 1/4W G 3.6K OHM PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 3.3K OHM CHIP RES.(1608) 1/10W J 3.3K OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 18K OHM CHIP RES.(1608) 1/10W J 18K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 560 OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 560 OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 560 OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 3.3K OHM CARBON RES. 1/4W J 330 OHM CHIP RES.(1608) 1/10W J 10 OHM CHIP RES.(1608) 1/10W J 10 OHM CHIP RES.(1608) 1/10W J 1.2K OHM CHIP RES.(1608) 1/10W J 8.2K OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W J 1.2K OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 1.2K OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 1.2K OHM CHIP RES.(1608) 1/10W J 1K OHM CARBON RES. 1/4W J 12 OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 220K OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 150K OHM CARBON RES. 1/4W J 15K OHM CARBON RES. 1/4W J 220K OHM CHIP RES.(1608) 1/10W J 6.8K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 220 OHM CHIP RES.(1608) 1/10W J 3.3K OHM CHIP RES.(1608) 1/10W J 15K OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 6.8K OHM PCB JUMPER D0.6-P5.0 CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 100 OHM CARBON RES. 1/4W J 100 OHM CHIP RES.(1608) 1/10W J 10K OHM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ELECTRICAL PARTS LIST Pos. R258 R259 R260 R261 R262 R263 R264 R265 R266 R267 R268 R269 R270 R271 R272 R273 R274 R275 R276 R277 R278 R279 R280 R281 R282 R288 R289 R301 R302 R303 R304 R305 R306 R307 R308 R309 R310 R311 R312 R313 R314 R315 R316 R317 R318 R320 R321 R322 R323 R324 R325 R326 R327 R332 R333 R334 R335 R336 h 12 NC 1-14-24 1-14-25 14PV385/39 9965 000 24183 14PV385/07 h 14PV385/01 9965 000 23544 14PV235/58 h 14PV235/07 h 9965 000 20938 9965 000 20938 9965 000 24183 h CHIP RES.(1608) 1/10W 0 OHM CHIP RES.(1608) 1/10W 0 OHM CHIP RES.(1608) 1/10W J 1.2K OHM CHIP RES.(1608) 1/10W J 8.2K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 1.2K OHM CHIP RES.(1608) 1/10W J 390K OHM CHIP RES.(1608) 1/10W J 330 OHM CHIP RES.(1608) 1/10W J 330 OHM CHIP RES.(1608) 1/10W J 220 OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 2.2K OHM CHIP RES.(1608) 1/10W J 6.8K OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 1.2K OHM CHIP RES.(1608) 1/10W J 56K OHM CHIP RES.(1608) 1/10W J 1.5K OHM CHIP RES.(1608) 1/10W J 120 OHM CHIP RES.(1608) 1/10W J 47 OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W 0 OHM CHIP RES.(1608) 1/10W 0 OHM CHIP RES.(1608) 1/10W J 2.2K OHM CARBON RES. 1/4W J 47K OHM CARBON RES. 1/4W J 680 OHM METAL OXIDE FILM RES. 1W J 2.2 OHM CHIP RES.(1608) 1/10W J 10 OHM CARBON RES. 1/4W J 6.8K OHM CHIP RES.(1608) 1/10W J 10K OHM CARBON RES. 1/4W J 680 OHM CARBON RES. 1/4W J 82 OHM CARBON RES. 1/4W J 82 OHM CARBON RES. 1/4W J 2.7 OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 22K OHM CHIP RES.(1608) 1/10W J 100 OHM CARBON RES. 1/4W J 2.7 OHM METAL OXIDE FILM RES. 1W J 2.2 OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 8.2K OHM CHIP RES.(1608) 1/10W J 75 OHM CHIP RES.(1608) 1/10W J 3.3K OHM CARBON RES. 1/4W J 1K OHM CARBON RES. 1/4W J 3.3K OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W J 75 OHM CHIP RES.(1608) 1/10W J 33K OHM CHIP RES.(1608) 1/10W J 2.2K OHM CARBON RES. 1/4W J 4.7K OHM CHIP RES.(1608) 1/10W J 75 OHM CHIP RES.(1608) 1/10W J 75 OHM CHIP RES.(1608) 1/10W J 33K OHM CARBON RES. 1/4W J 75 OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W J 22K OHM CHIP RES.(1608) 1/10W J 22K OHM CHIP RES.(1608) 1/10W J 47K OHM 14PV235/01 h Description 14PV135/58 h 12 NC 14PV135/07 Pos. R339 R340 R401 R402 R405 R406 R407 R408 R409 R410 R411 R412 R413 R414 R415 R416 R418 R420 R422 R423 R424 R425 R426 R471 R681 R682 R683 R684 R685 R686 R687 R689 R690 R691 R692 R693 R694 R695 R696 R697 R698 R701 R702 R703 R704 R707 R709 R710 R711 R712 R714 R723 R724 R725 R726 R727 R728 R729 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-14-26 14PV235/58 14PV385/01 14PV385/07 14PV385/39 9965 000 14390 9965 000 14390 9965 000 14390 9965 000 14390 14PV235/07 SW201 SW202 SW203 SW204 CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 100 OHM CARBON RES. 1/4W J 75 OHM CARBON RES. 1/4W J 390 OHM CHIP RES.(1608) 1/10W J 75 OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 33K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 47K OHM CHIP RES.(1608) 1/10W J 6.2K OHM CHIP RES.(1608) 1/10W J 47K OHM CHIP RES.(1608) 1/10W J 6.2K OHM CHIP RES.(1608) 1/10W J 47K OHM CHIP RES.(1608) 1/10W J 6.2K OHM CHIP RES.(1608) 1/10W J 1.8K OHM CHIP RES.(1608) 1/10W J 10K OHM CHIP RES.(1608) 1/10W J 1.8K OHM CHIP RES.(1608) 1/10W J 1K OHM CARBON RES. 1/4W J 1.8K OHM CHIP RES.(1608) 1/10W J 22K OHM CHIP RES.(1608) 1/10W J 470 OHM CHIP RES.(1608) 1/10W J 1K OHM CHIP RES.(1608) 1/10W J 1M OHM CHIP RES.(1608) 1/10W J 5.6K OHM CHIP RES.(1608) 1/10W J 22K OHM CHIP RES.(1608) 1/10W J 2.2K OHM CHIP RES.(1608) 1/10W J 2.2K OHM CARBON RES. 1/4W J 47K OHM CARBON RES. 1/4W J 100 OHM CARBON RES. 1/4W J 820 OHM CHIP RES.(1608) 1/10W J 680 OHM CHIP RES.(1608) 1/10W J 22K OHM CHIP RES.(1608) 1/10W J 330K OHM CHIP RES.(1608) 1/10W J 12K OHM CHIP RES.(1608) 1/10W J 120 OHM CHIP RES.(1608) 1/10W J 560 OHM CHIP RES.(1608) 1/10W J 1.8K OHM CHIP RES.(1608) 1/10W J 12K OHM CHIP RES.(1608) 1/10W J 100 OHM CHIP RES.(1608) 1/10W J 2.7K OHM CHIP RES.(1608) 1/10W J 3.3K OHM CHIP RES.(1608) 1/10W J 56K OHM CHIP RES.(1608) 1/10W J 1M OHM CHIP RES.(1608) 1/10W J 3.3K OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 56K OHM CHIP RES.(1608) 1/10W J 4.7K OHM CHIP RES.(1608) 1/10W J 15K OHM CHIP RES.(1608) 1/10W J 12K OHM CHIP RES.(1608) 1/10W J 5.6K OHM CARBON RES. 1/4W J 1K OHM REMOTE RECEIVER PIC-37042LU SWITCHES TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 14PV235/01 9965 000 10857 Description 14PV135/58 h 12 NC 14PV135/07 Pos. R730 R731 R732 R733 R737 R738 R739 R740 R741 R742 R743 R744 R745 R746 R747 R748 R749 R751 R752 R753 R754 R755 R756 R757 R851 R852 R853 R854 R856 R857 R858 R859 R860 R861 R862 R863 R864 R865 R866 R867 R869 R869 R870 R871 R873 R874 R875 R876 R877 R878 R879 R884 RS201 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 CN302 9965 000 13872 CN301 9965 000 05261 Q201 Q202 9965 000 20922 9965 000 20922 14PV385/39 9965 000 24184 14PV385/07 CN603 14PV385/01 3143 021 00011 3143 021 00031 2422 070 98211 2422 070 98218 3143 021 00021 9965 000 09200 9965 000 12194 9965 000 13869 9965 000 05629 14PV235/58 9965 000 13855 4822 265 11659 4822 265 11661 9965 000 13854 9965 000 12189 9965 000 18113 9965 000 18114 9965 000 12173 9965 000 08566 14PV235/07 JK151 JK701 JK702 JK703 PI201 TB3 TB7 TB15 TB21 TP001 TP002 TP003 TP007 TP008 TP009 TP010 X201 X202 X301 X401 1005/ TU001 1005/ TU001 1005/ TU001 1006/ TU002 1006/ TU002 5000 8000 8016 8016 8200 Description TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 TACT SWITCH SKQNAED010 LEAF SWITCH MXS00052MPP0 ROTARY MODE SWITCH SSS-50MD MISCELLANEOUS HEADPHONE JACK MSJ-035-10A B RCA JACK(YELLOW) MSP-281V4-B RCA JACK(WHITE) MSP-281V1-B SKIRT JACK 21P HRC-21V-02P PHOTO INTERRUPTER RPI-302C70 HEAD SHIELD S T6400RA LED HOLDER T6400RA ROHM HOLDER H7770JD BUSH, LED(F) H3700UD PCB JUMPER D0.6-P12.5 PCB JUMPER D0.6-P12.5 PCB JUMPER D0.6-P12.5 PCB JUMPER D0.6-P10.0 PCB JUMPER D0.6-P12.5 PCB JUMPER D0.6-P12.5 PCB JUMPER D0.6-P22.5 X’TAL 32.768KHZ(20PPM) X’TAL 12.000MHZ X’TAL 4.433619MHZ X’TAL 4.433619MHZ 14PV235/01 9965 000 14390 9965 000 14390 9965 000 14390 9965 000 14390 9965 000 14390 9965 000 14390 9965 000 12192 9965 000 16626 14PV135/58 h 12 NC 14PV135/07 Pos. SW205 SW206 SW207 SW208 SW209 SW210 SW211 SW212 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3143 027 10311 TUN 04 IF V+U PLL SPLI BGDKIL 3143 027 10331 TUN 04 IF V+U PLL IEC BGDKI 1 1 1 1 1 1 1 3143 027 10291 TUN 04 IF V+U PLL SPLIT BGDKI 1 1 3143 027 10301 TUN 04 IF V+U PLL PHONO BGDKI 1 1 3143 027 10321 TUN 04 IF V+U PLL PHON BGDKIL COI DEGAUS FUNAI EARTH CABLE MAINSCORD EUR 2A5 1M7 JH BK B MAINSCORD UK 5A 1M8 BK B TUNER CABLE JUNCTION A CBA CONNECTOR 12P TUC-P12X-B1 JUNCTION B CBA CONNECTOR, 7P TUC-P07X-B1 JUNCTION C CBA CONNECTOR 4P TUC-P04X-B1 SENSOR CBA PHOTO TRANSISTOR MID-32A22F PHOTO TRANSISTOR MID-32A22F POWER CBA Consists of the following H.V./POWER SUPPLY CBA CRT CBA H.V./POWER SUPPLY CBA 1-14-27 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 h 9965 000 22656 9965 000 13908 4822 124 81151 9965 000 24186 2020 554 90173 9965 000 14280 9965 000 13677 h 9965 000 22657 h h h h h h 9965 000 22649 h 9965 000 22655 CN551 CN552 CN601 CN602 D551 D553 D554 D555 D556 D557 D558 D560 D562 D563 D565 D601 9965 000 13876 9965 000 13912 9965 000 13877 9965 000 24187 h h h h h h h h 9965 000 13847 9965 000 11210 4822 130 32778 4822 130 32778 9965 000 13880 9965 000 13880 9965 000 13881 4822 130 32778 9965 000 12904 9965 000 24188 9965 000 13883 1-14-28 14PV385/39 h 14PV385/07 9965 000 24185 14PV385/01 h 14PV235/58 9965 000 22652 9965 000 22648 14PV235/07 h CAPACITORS ELECTROLYTIC CAP. 2.2UF/50V M LL ELECTROLYTIC CAP. 1000UF/25V M CERAMIC CAP.(AX) B K 0.01UF/50V ELECTROLYTIC CAP. 220UF/25V M ELECTROLYTIC CAP. 47UF/25V M ELECTROLYTIC CAP. 2.2UF/50V M FILM CAP.(P) 0.047UF/50V J CERAMIC CAP. R K 680PF/2KV(HR) P.P. CAP 0.0082UF/1.6K J FILM CAP.(P) 0.01UF/50V J ELECTROLYTIC CAP. 47UF/25V M ELECTROLYTIC CAP. 47UF/160V M W/F ELECTROLYTIC CAP. 1UF/160V M ELECTROLYTIC CAP. 4.7UF/250V M ELECTROLYTIC CAP. 1UF/50V M ELECTROLYTIC CAP. 22UF/50V M P.P. CAP 0.33UF/200V J SAFETY CAP. 2200PF/250V KX METALLIZED FILM CAP. 0.1UF/250V ELECTROLYTIC CAP. 100UF/400V M FILM CAP.(P) 0.039UF/50V J FILM CAP.(P) 0.0012UF/50V J FILM CAP.(P) 0.068UF/50V J CERAMIC CAP. R K 220PF/2KV(HR) ELECTROLYTIC CAP. 470UF/25V M ELECTROLYTIC CAP. 1UF/50V M ELECTROLYTIC CAP. 1000UF/16V M ELECTROLYTIC CAP. 470UF/16V M ELECTROLYTIC CAP. 1000UF/16V M CERAMIC CAP.(AX) SL J 68PF/50V ELECTROLYTIC CAP. 470UF/35V M CERAMIC CAP. R K 680PF/2KV(HR) ELECTROLYTIC CAP. 100UF/160V M CERAMIC CAP.(AX) B K 0.01UF/50V ELECTROLYTIC CAP. 1000UF/6.3V M ELECTROLYTIC CAP. 100UF/16V M ELECTROLYTIC CAP. 47UF/25V M ELECTROLYTIC CAP. 4.7UF/50V M ELECTROLYTIC CAP. 100UF/10V M CONNECTORS CONNECTOR BASE, 5P TV-50P-05-V3 CONNECTOR BASE, 7P TUC-P07P-B1 CONNECTOR BASE, 2P TV-50P-02-V3 CONNECTOR BASE 12P TUC-P12P-B1 DIODES DIODE 1N5397-B ZENER DIODE MTZJT-7720B SWITCHING DIODE 1SS133(T-77) PCB JUMPER D0.6-P12.5 SWITCHING DIODE 1SS133(T-77) DIODE FR104-B DIODE FR104-B ZENER DIODE MTZJT-7736B SWITCHING DIODE 1SS133(T-77) ZENER DIODE DZ-5.1BSBT265 ZENER DIODE MTZJT-7736A DIODE 1N5399-B/P 14PV235/01 h Description 14PV135/58 C551 C552 C553 C554 C555 C556 C558 C559 C560 C561 C562 C565 C567 C569 C570 C572 C575 C602 C604 C611 C613 C614 C615 C616 C617 C618 C619 C621 C622 C624 C625 C626 C627 C629 C630 C632 C633 C634 C636 h 12 NC 14PV135/07 Pos. 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 h h h h h h h h h h h h h h 9965 000 18120 9965 000 23546 h 9965 000 18121 h h 9965 000 24190 9965 000 05627 Q551 Q553 Q554 Q602 Q603 Q604 Q605 Q606 Q607 Q608 h 9965 000 13897 9965 000 13899 9965 000 05643 9965 000 13901 4822 130 42292 9965 000 05643 4822 130 63665 4822 130 42292 4822 130 42292 9965 000 05643 R550 R551 R552 h h h h h h h 9965 000 14867 1-14-29 14PV385/39 h 14PV385/07 h 14PV385/01 L552 L553 L554 L601 L603 h 14PV235/58 h h 14PV235/07 IC551 IC601 DIODE 1N5399-B/P DIODE 1N5399-B/P DIODE 1N5399-B/P SWITCHING DIODE 1SS133(T-77) ZENER DIODE MTZJT-775.6B ZENER DIODE MTZJT-7724C ZENER DIODE MTZJT-7720C SWITCHING DIODE 1SS133(T-77) RECTIFIER DIODE FR202-B/P SWITCHING DIODE 1SS133(T-77) DIODE FR104-B ZENER DIODE MTZJT-7722B ZENER DIODE MTZJT-7718B SCHOTTKY BARRIER DIODE 11EQS04 SCHOTTKY BARRIER DIODE 11EQS04 SCHOTTKY BARRIER DIODE ERB81-004 DIODE FR104-B SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) ZENER DIODE MTZJT-776.8B FAST RECOVERY DIODE CA201-4 SWITCHING DIODE 1SS133(T-77) ZENER DIODE MTZJT-7733C SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1N4148 ZENER DIODE MTZJT-776.2C CARBON RES. 1/4W J 100 OHM ZENER DIODE MTZJT-778.2B SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) SWITCHING DIODE 1SS133(T-77) ZENER DIODE MTZJT-7715B SWITCHING DIODE 1SS133(T-77) IC’s VERTICAL OUTPUT IC LA78040A PHOTOCOUPLER PS2561L1-1-VL COILS PCB JUMPER D0.6-P7.5 CHOKE COIL 22UH-K PCB JUMPER D0.6-P7.5 LINE FILTER ELF15N005A CHOKE COIL 47UH-K TRANSISTORS TRANSISTOR TT2084LS-YB11 TRANSISTOR 2SC1627Y-TPE2 TRANSISTOR 2SC2785(F) MOS FET 2SK2647 TRANSISTOR 2SC2120-Y(TPE2) TRANSISTOR 2SC2785(F) TRANSISTOR 2SA950(O) TRANSISTOR 2SC2120-Y(TPE2) TRANSISTOR 2SC2120-Y(TPE2) TRANSISTOR 2SC2785(F) RESISTORS CARBON RES. 1/4W J 680K OHM CARBON RES. 1/4W J 8.2K OHM CARBON RES. 1/4W J 3.3K OHM h 9965 000 13883 9965 000 13883 9965 000 13883 4822 130 32778 4822 130 33948 9965 000 18164 9965 000 13884 4822 130 32778 9965 000 18235 4822 130 32778 9965 000 13880 9965 000 05695 9965 000 13882 4822 130 83194 4822 130 83194 4822 130 80601 9965 000 13880 4822 130 32778 4822 130 32778 4822 130 32778 9965 000 23556 9965 000 13885 4822 130 32778 4822 130 81729 4822 130 32778 4822 130 30621 9965 000 24189 9965 000 19520 9965 000 11153 4822 130 32778 4822 130 32778 4822 130 32778 9965 000 18091 4822 130 32778 14PV235/01 Description h 14PV135/58 h 12 NC 14PV135/07 Pos. D602 D603 D604 D605 D609 D610 D610 D612 D613 D614 D615 D616 D616 D617 D618 D619 D620 D622 D623 D624 D625 D626 D627 D629 D630 D630 D631 D634 D635 D636 D637 D638 D641 D642 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 h h h h h h h h h h h h h h h h h h h h h h h 1-14-30 14PV385/39 h 14PV385/07 h 14PV385/01 h 14PV235/58 h 14PV235/07 h CARBON RES. 1/4W J 22K OHM 9965 000 22680 CARBON RES. 1/4W J 1K OHM CARBON RES. 1/4W J 8.2 OHM CARBON RES. 1/4W J 8.2 OHM 9965 000 09896 CARBON RES. 1/4W J 10K OHM PCB JUMPER D0.6-P5.0 9965 000 19516 CARBON RES. 1/4W J 1 OHM 9965 000 19516 CARBON RES. 1/4W J 1 OHM 9965 000 24191 CARBON RES. 1/4W J 2.2 OHM 9965 000 14871 CARBON RES. 1/4W J 6.8K OHM PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W J 470 OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 270 OHM CARBON RES. 1/4W J 390 OHM CARBON RES. 1/4W J 1K OHM 9965 000 24192 CARBON RES. 1/4W J 39 OHM 9965 000 24193 METAL OXIDE FILM RES. 2W J 560 OHM 9965 000 24192 CARBON RES. 1/4W J 39 OHM 9965 000 19602 CARBON RES. 1/4W J 100K OHM 9965 000 24192 CARBON RES. 1/4W J 39 OHM CARBON RES. 1/4W J 100K OHM PCB JUMPER D0.6-P5.0 9965 000 22680 CARBON RES. 1/4W J 1K OHM 9965 000 22662 CARBON RES. 1/4W J 180K OHM CARBON RES. 1/4W J 56K OHM CARBON RES. 1/4W J 56K OHM 9965 000 22684 CARBON RES. 1/4W J 22K OHM 9965 000 09896 CARBON RES. 1/4W J 10K OHM 9965 000 22674 METAL OXIDE FILM RES. 2W J 2.2 OHM 9965 000 22684 CARBON RES. 1/4W J 22K OHM 9965 000 09896 CARBON RES. 1/4W J 10K OHM CARBON RES. 1/4W J 8.2K OHM CARBON RES. 1/4W J 2.2K OHM PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W J 8.2 OHM 9965 000 24194 CARBON RES. 1/4W J 220K OHM 9965 000 22667 CARBON RES. 1/4W J 56K OHM 9965 000 22668 ANTI-SURGE RESISTOR 1/2W J 3.3M OHM 9965 000 22668 ANTI-SURGE RESISTOR 1/2W J 3.3M OHM 9965 000 22668 ANTI-SURGE RESISTOR 1/2W J 3.3M OHM 9965 000 24195 CEMENT RESISTOR 5W J 1.8 OHM CARBON RES. 1/4W J 56 OHM CARBON RES. 1/4W J 220 OHM CARBON RES. 1/4W J 220 OHM CARBON RES. 1/4W J 180 OHM CARBON RES. 1/4W J 390K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1K OHM 9965 000 22663 CARBON RES. 1/4W J 22 OHM 9965 000 14278 CEMENT RESISTOR 5W J 0.68 OHM PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W J 1.2K OHM 9965 000 24196 CARBON RES. 1/4W J 820K OHM CARBON RES. 1/4W J 560K OHM CARBON RES. 1/4W J 680K OHM CARBON RES. 1/4W J 680K OHM 9965 000 15270 CARBON RES. 1/4W J 1.2K OHM 14PV235/01 h Description 14PV135/58 h 12 NC 14PV135/07 Pos. R553 R554 R555 R556 R557 R558 R559 R560 R561 R564 R565 R566 R568 R569 R572 R574 R576 R577 R578 R579 R580 R581 R583 R584 R585 R586 R587 R588 R589 R590 R591 R592 R593 R594 R595 R596 R597 R598 R601 R602 R603 R604 R605 R611 R612 R612 R613 R615 R615 R616 R617 R618 R619 R620 R621 R622 R624 R625 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 h h h h h h h h h h h h h h h h h h h h h h h h h h h h 1-14-31 14PV385/39 h 14PV385/07 h 14PV385/01 h 14PV235/58 h 14PV235/07 CL501A F601 FH601 FH602 PB1 PB4 PB5 PL1 PL2 PS602 SA601 T551 T552 T601 T601 TM601 TM602 TP501 h Description 9965 000 15270 CARBON RES. 1/4W J 1.2K OHM PCB JUMPER D0.6-P5.0 9965 000 19514 CARBON RES. 1/4W J 820 OHM 9965 000 22687 CARBON RES. 1/4W J 33K OHM 9965 000 09896 CARBON RES. 1/4W J 10K OHM 9965 000 19518 CARBON RES. 1/4W J 15K OHM 9965 000 19518 CARBON RES. 1/4W J 15K OHM 9965 000 22682 CARBON RES. 1/4W J 180 OHM 9965 000 14870 CARBON RES. 1/4W G 1K OHM 9965 000 23547 CARBON RES. 1/4W G 5.6K OHM 9965 000 23549 CARBON RES. 1/4W G 39K OHM 9965 000 23549 CARBON RES. 1/4W G 39K OHM 9965 000 22686 CARBON RES. 1/4W J 2.7K OHM 9965 000 24197 METAL OXIDE FILM RES. 1W J 1K OHM 9965 000 09896 CARBON RES. 1/4W J 10K OHM 9965 000 22686 CARBON RES. 1/4W J 2.7K OHM 9965 000 22686 CARBON RES. 1/4W J 2.7K OHM 9965 000 22667 CARBON RES. 1/4W J 56K OHM 9965 000 22660 CARBON RES. 1/4W J 15 OHM 9965 000 22686 CARBON RES. 1/4W J 2.7K OHM 9965 000 22688 CARBON RES. 1/4W J 390 OHM CARBON RES. 1/4W J 100 OHM PCB JUMPER D0.6-P15.0 9965 000 22681 CARBON RES. 1/4W J 150 OHM 9965 000 22664 CARBON RES. 1/4W J 2.2K OHM CARBON RES. 1/4W J 5.6K OHM CARBON RES. 1/4W J 47K OHM 9965 000 22683 CARBON RES. 1/4W J 220 OHM 9965 000 22670 METAL OXIDE FILM RES. 2W J 10K OHM 9965 000 22670 METAL OXIDE FILM RES. 2W J 10K OHM PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W J 1.8K OHM CARBON RES. 1/4W J 820K OHM CARBON RES. 1/4W J 47 OHM 9965 000 13902 POWER SWITCH SDKVA30100 9965 000 13874 BEAD INDUCTORS FBA04HA600VB-00 9965 000 13875 BEAD INDUCTORS FBR07HA121TB-00 PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 MISCELLANEOUS 9965 000 18126 LEAD WIRE 3P/230 9965 000 13890 FUSE 4A/250V 215004 4822 256 10461 FUSE HOLDER MSF-015 4822 256 10461 FUSE HOLDER MSF-015 9965 000 18122 POWER PCB HOLDER T6400RA 9965 000 18111 13V POW HEAT SINK PAL PHKT6400RA 9965 000 18123 13V P H/S PAL PHM ASSEMBLY T6400RA 9965 000 08646 SCREW, P-TIGHT 3X12 WASHER HEAD+ 9965 000 12171 SCREW, B-TIGHT M3X8 BIND HEAD+ 9965 000 13896 THERMISTOR ZPB31BL9R0A 9965 000 20946 SURGE ABSORBER 470V+-10PER 9965 000 18124 FLYBACK TRANS BSC23-2603S 9965 000 13904 H0RIZONTAL DRIVE TRANS LP2-005 9965 000 24198 SWITCHING TRANS 04705 9965 000 24202 SWITCHING TRANS 04703 9965 000 22702 TAB 42018 9965 000 22702 TAB 42018 PCB JUMPER D0.6-P7.5 14PV235/01 h 14PV135/58 h 12 NC 14PV135/07 Pos. R626 R627 R628 R631 R632 R633 R634 R635 R636 R637 R638 R639 R640 R641 R642 R643 R644 R645 R646 R647 R649 R651 R652 R653 R654 R655 R656 R657 R658 R659 R660 R661 R662 R663 SW601 BC551 BC602 BC604 BC605 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Q501 Q502 Q503 R501 R502 R503 R504 R505 R506 R507 R510 R511 R512 R513 R514 R515 R516 R517 R518 R519 R520 R521 R522 R523 JK501 C901 C902 C903 C904 C905 C906 C916 C917 C920 C921 C922 C923 C926 4822 130 60578 4822 130 60578 4822 130 60578 h h 4822 053 10183 4822 053 10183 4822 053 10183 h 9965 000 13913 h 1-14-32 14PV385/39 L501 14PV385/07 9965 000 13911 9965 000 05247 14PV385/01 CN501 CN502 14PV235/58 C501 C502 C503 C504 C505 14PV235/07 9965 000 23550 14PV235/01 h Description PCB JUMPER D0.6-P7.5 PCB JUMPER D0.6-P15.0 PCB JUMPER D0.6-P15.0 CARBON P.O.T. 20K OHM B CRT CBA CAPACITORS CERAMIC CAP.(AX) B K 220PF/50V CERAMIC CAP.(AX) B K 220PF/50V CERAMIC CAP.(AX) B K 220PF/50V CERAMIC CAP. B K 1000PF/2KV ELECTROLYTIC CAP. 1UF/50V M H7 CONNECTORS PIN CONNECTOR 005P-5100 CONNECTOR BASE, 4P TUC-P04P-B1 COILS PCB JUMPER D0.6-P5.0 TRANSISTORS TRANSISTOR 2SC2482 TPE6 TRANSISTOR 2SC2482 TPE6 TRANSISTOR 2SC2482 TPE6 RESISTORS METAL OXIDE FILM RES. 1W J 18K OHM METAL OXIDE FILM RES. 1W J 18K OHM METAL OXIDE FILM RES. 1W J 18K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1.5K OHM PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 120K OHM CARBON RES. 1/4W J 15 OHM CARBON RES. 1/4W J 560 OHM CARBON RES. 1/4W J 120K OHM CARBON RES. 1/4W J 15 OHM CARBON RES. 1/4W J 560 OHM CARBON RES. 1/4W J 120K OHM CARBON RES. 1/4W J 15 OHM CARBON RES. 1/4W J 560 OHM CRT SOCKET ISMS01S TEXT CBA CAPACITORS ELECTROLYTIC CAP. 22UF/50V M CERAMIC CAP.(AX) B K 100PF/50V ELECTROLYTIC CAP. 0.1UF/50V M ELECTROLYTIC CAP. 0.1UF/50V M CERAMIC CAP.(AX) Y M 0.01UF/16V ELECTROLYTIC CAP. 100UF/10V M CERAMIC CAP.(AX) CH J 18PF/50V CERAMIC CAP.(AX) CH J 18PF/50V CERAMIC CAP.(AX) Y M 0.01UF/16V ELECTROLYTIC CAP. 100UF/10V M ELECTROLYTIC CAP. 100UF/10V M ELECTROLYTIC CAP. 100UF/10V M CERAMIC CAP.(AX) Y M 0.01UF/16V 14PV135/58 h 12 NC 14PV135/07 Pos. TP502 TP503 TP504 VR601 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-14-33 14PV385/39 R901 R902 R903 R904 R905 R906 R908 R911 R912 R913 R914 R915 R916 R918 R919 R920 R921 R922 R923 R924 R925 R926 R927 X901 14PV385/07 Q901 14PV385/01 L901 L902 14PV235/58 IC901 CONNECTORS 9965 000 13916 CONNECTOR, 8P TUC-P08X-B1 9965 000 13917 CONNECTOR, 6P TUC-P06X-B1 DIODES 4822 130 32778 SWITCHING DIODE 1SS133(T-77) 4822 130 32778 SWITCHING DIODE 1SS133(T-77) 9965 000 18140 ZENER DIODE MTZJT-773.6B 4822 130 32778 SWITCHING DIODE 1SS133(T-77) 4822 130 32778 SWITCHING DIODE 1SS133(T-77) 4822 130 32778 SWITCHING DIODE 1SS133(T-77) 4822 130 32778 SWITCHING DIODE 1SS133(T-77) 9965 000 18119 ZENER DIODE DZ-3.3BSBT265 9965 000 18119 ZENER DIODE DZ-3.3BSBT265 IC’s 9965 000 18141 IC:TEXT SAA5265 COILS 9965 000 18142 INDUCTOR 10UH-J-26T 9965 000 18142 INDUCTOR 10UH-J-26T TRANSISTORS 9965 000 05643 TRANSISTOR 2SC2785(F) RESISTORS CARBON RES. 1/4W J 1.2K OHM CARBON RES. 1/4W J 1K OHM CARBON RES. 1/4W J 24K OHM CARBON RES. 1/4W J 10K OHM CARBON RES. 1/4W J 10K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1.5K OHM CARBON RES. 1/4W J 1K OHM PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W J 220 OHM METAL OXIDE FILM RES. 2W J 56 OHM PCB JUMPER D0.6-P5.0 PCB JUMPER D0.6-P5.0 CARBON RES. 1/4W J 3.3K OHM CARBON RES. 1/4W J 3.3K OHM CARBON RES. 1/4W J 3.3K OHM CARBON RES. 1/4W J 1K OHM CARBON RES. 1/4W J 10 OHM CARBON RES. 1/4W J 4.7K OHM CARBON RES. 1/4W J 1K OHM 9965 000 12194 X’TAL 12.000MHZ 14PV235/07 D901 D902 D903 D904 D905 D906 D907 D908 D909 Description 14PV235/01 CN901 CN902 h 12 NC 14PV135/58 Pos. 14PV135/07 14PV135/01 ELECTRICAL PARTS LIST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EXPLODED VIEWS [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ] Cabinet L9 PB5 PL2 PB4 PL2 B3 PL2 L1 L2 TL1 L1 A3 PL1 [ E,F,G ] Z10 TL1 PL1 A12 PL1 TL1 TB2 L2 H.V./Power Supply CBA TL1 L8 Comparison Chart of Models and Marks Model 14PV135/07 14PV235/07 14PV385/07 14PV135/01 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV385/39 CL604 TL1 TL1 SP151 TL1 TB11 L8 PB1 Mark E F G H I J K L M CL801 TL1 1B1 B4 TL1 B2 CRT CBA L7 Z10 TL1 Sensor CBA A Text CBA TB3 A2 [ F,G,I,J,L,M ] B15 TL1 L1 L1 [ G,J,M ] B17 TL1 TB10 Junction B CBA TB21 B2 Junction C CBA B2 B4 Junction A CBA TB7 TL14 B1 Main CBA TL18 A TB1 B2 L7 TB15 Sensor CBA Main CBA Z1 A1-5 Z7 Z10 A1-4 L7 A1-9 A1-8 See Electrical Parts List for parts with this mark. A1-7 A1-10 TB23 A1-3 Some Ref. Numbers are not in sequence. A1-1 TL14 1-15-4 1-15-5 T6450CEX [ 14PV135/ (01, 07, 58), 14PV235/ (01, 07, 58), 14PV385/ (01, 07, 39) ] Packing X3 X4 S2 S6 S3 X2 X1 X5 TAPE S4 S1 FR ON T 1-15-6 T6450PEX PRODUCT SAFETY NOTE: Products marked with a h have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don’t degrade the safety of the product through improper servicing. *)Note: 1010 0002 0004 0030 0015 0054 0057 1100 1B1 1B1 TB1 TB2 TB10 TB11 TB23 TL1 B2 L8 3143 027 60461 3143 027 60481 3143 027 60491 3143 027 60501 3143 027 60511 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9965 000 18085 SPEAKER ASSY 1 4822 402 10174 3143 021 20031 3143 021 20011 3143 027 50351 BRACKET ==>14" TENSION SPRING SCREENING CABLE CLAMP SCREW ===>CRT FLAT HEAD SCREW 4X18 CRT A34EAC01X71 (LGPD) B DECK ASSEMBLY CZD013/VM2326 DECK ASSEMBLY CZD013/VM23A6 TRAY CHASSIS T6400RA TOP COVER T6300RA 9965 000 18086 RCA HOLDER T6400RA CLOTH(10X30XT:0.3) T5300UA BOTTOM PLATE T6300RA 9965 000 08646 SCREW, P-TIGHT 3X12 WASHER HEAD+ 1-16-3 1 1 1 1 4822 502 14109 3143 027 50131 3143 027 50191 1 1 1 1 4822 502 14109 3143 021 20021 4822 502 14062 1 14PV385/39 1 14PV385/07 Description FRONT ASSY 14PV135/01/07/58 FRONT ASSY 14PV235/01/07/58 FRONT ASSY 14PV385/01 FRONT ASSY 14PV385/07 FRONT ASSY 14PV385/39 FRONT CAB PH01 LIGHT GREY FRONT CAB (A) GR PH001 WORDMARK PHILIPS CASSETTE DOOR (A) GR PH001 CASSETTE DOOR PH01 LIGHT GREY LEG SPRING FUNCTION KNOB (A) GR PH001 FUNCTION KNOB PH01 LIGHT GREY LED LENS B (C) LED LENS A (C) LED LENS A (R) LED LENS B (R) SCR PAN TORX TAP ST ZN BK 3X10 TE HOLDER SCREW TORX HEAD TAPPING SCREW M4X12 SCR PAN TORX TAP ST ZN BK 3X10 REAR CAB PH001 POWER BUTTON PH001 14PV385/01 h 12 NC 14PV235/58 0001 0001 0001 0001 0001 0001 0001 0011 0005 0005 0006 0009 0009 0007 0007 0008 0008 0010 0031 0055 0056 0059 0070 0071 Pos. Expl. View *) *) *) *) *) A1-1 A1-1 A1-3 A1-4 A1-4 A1-5 A1-7 A1-7 A1-8 A1-8 A1-9 A1-9 L7 B15 L1 L2 TL1 A2 A12 (SP151+ CL801) B4 B15 B3 14PV235/07 Pos. 14PV235/01 MECHANICAL PARTS LIST 14PV135/58 A1-8 A1-9 A1-10 L7 14PV135/07 A1-1 A1-3 A1-4 A1-5 A1-7 14PV135/01 Pos.1 consists of 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 TL14 TL18 0450 0450 0450 0453 0453 0454 0454 0455 0469 0471 0150 0150 0150 0001 0002 0003 0004 S1 S1 S1 S2 S2 S2 S2 X1 S6 X3 X3 X3 9965 000 12171 SCREW, B-TIGHT M3X8 BIND HEAD+ 9965 000 13027 SCREW, P-TIGHT M3X8 BIND HEAD+ PACKING BOX FOLDED 14PV235 BOX FOLDED 14PV135 BOX FOLDED 14PV385 STYROFOAM TOP A STYROFOAM TOP B STYROFOAM BOTTOM A STYROFOAM BOTTOM B BAG (==>MAINS CORD) TOPFOIL STRETCHFOIL 500/15 9965 000 18138 RC RT350/111 9965 000 18139 RC RT351/111 9965 000 18143 RC RT352/111 TEST TAPES 3143 023 20011 TEST TAPE FL6K(S) 3143 023 20021 TEST TAPE FL6NS8 3143 023 20051 TEST TAPE E-120 HS 3143 023 20041 TEST TAPE FL6M 1-16-4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 STANDARD MAINTENANCE [ 14PV385/ (01, 07, 39) ] Service Schedule of Components This maintenance chart shows you the standard of replacement and cleaning time for each part. Because those may replace depending on environment and purpose for use, use the chart for reference. H: Hours Deck Ref.No. Part Name : Cleaning I: Replace Periodic Service Schedule 1,000 H 2,000 H 3,000 H 4,000 H B2 Cylinder Assembly B3 Loading Motor Assembly B8 Pulley Assembly I I B587 Tension Lever Assembly I I B31 ACE Head Assembly I B573, B574 Reel S, Reel T I B37 Capstan Motor I I B52 Cap Belt I I *B73 FE Head *B86 F Brake Assembly (HI) I I B133 Idler Assembly (HI) I I B410 Pinch Arm Assembly I I B414 M Brake (SP) Assembly (HI) I I B416 M Brake (TU) Assembly (HI) I I B525 LDG Belt I I I I I I Notes: 1.Clean all parts for the tape transport (Upper Drum with Video Head / Pinch Roller / ACE Head / FE Head) using 90% lsopropyl Alcohol. 2.After cleaning the parts, do all DECK ADJUSTMENTS. 3.For the reference numbers listed above, refer to Deck Exploded Views. * B73 ------ Recording model only * B86 ------ Not used in 2 head model. 2-1-3 T6450MEN Cleaning Cleaning of ACE Head Cleaning of Video Head Clean the head with a cotton swab. Procedure 1.Remove the top cabinet. 2.Dip the cotton swab in 90% isopropyl alcohol and clean the ACE Head. Be careful not to damage the upper drum and other tape running parts. Clean the head with a head cleaning stick or chamois cloth. Procedure 1.Remove the top cabinet. 2.Put on a glove (thin type) to avoid touching the upper and lower drum with your bare hand. 3.Put a few drops of 90% Isopropyl alcohol on the head cleaning stick or on the chamois cloth and, by slightly pressing it against the head tip, turn the upper drum to the right and to the left. Notes: 1.Avoid cleaning the ACE Head vertically. 2.Wait for the cleaned part to dry thoroughly before operating the unit or damage may occur. Notes: 1.The video head surface is made of very hard material, but since it is very thin, avoid cleaning it vertically. 2.Wait for the cleaned part to dry thoroughly before operating the unit. 3.Do not reuse a stained head cleaning stick or a stained chamois cloth. ACE Head Do Not touch with your bare hand! Upper Cylinder Do Not ! Video Head Cleaning Stick 2-1-4 T6450MEN DISASSEMBLY/ASSEMBLY PROCEDURES OF DECK MECHANISM [ 14PV385/ (01, 07, 39) ] Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to CABINET DISASSEMBLY INSTRUCTIONS on page 1-5-6.) All the following procedures, including those for adjustment and replacement of parts, should be done in Eject mode; see the positions of [44] and [45] in Fig. DM1H on page 2-4-12. When reassembling, follow the steps in reverse order. STEP START/LOC. ING No. No. PART Fig. No. REMOVAL REMOVE/*UNHOOK/ UNLOCK/RELEASE/ UNPLUG/DESOLDER [1] [1] Guide Holder A T DM3H 2(S-1) [2] [1] Cassette Holder Assembly T DM4H (S-10) [3] [2] Slider (SP) T DM5H (S-1A), *(L-1) [4] [2] Slider (TU) T DM5H *(L-2) [5] [4] Lock Lever T DM5H *(L-3), *(P-1) [6] [2] Cassette Plate T DM5H [7] [7] Cylinder Assembly T DM1H, DM6H Desolder, 3(S-2) [8] [8] Loading Motor Assembly T DM1H, DM7H Desolder, LDG Belt, 2(S-3) [9] [9] ACE Head Assembly T DM1H, DM7H (S-4) [10] [2] Tape Guide Arm Assembly T DM1H, DM8H-1 *(P-2) [11] [10] C Door Opener T DM1H, DM8H-1 (S-4A), *(L-4) [12] [11] Pinch Arm (B) T DM1H, DM8H-1, DM8H-2 *(P-3) [13] [12] Pinch Arm (A) Assembly T DM1H, DM8H-1, DM8H-2 [14] [14] FE Head T DM1H, DM9H [15] [15] Prism T DM1H, DM9H (S-6) [16] [2] Slider Shaft T DM10H *(L-5) [17] [16] C Drive Lever (SP) T DM10H [18] [16] C Drive Lever (TU) T DM10H (S-7), *(P-4) [19] [20] [21] [19] [20] [20] Capstan Motor Clutch Assembly (HI) Center Gear B B B DM2H, DM11H DM2H, DM12H DM12H 3(S-8), Cap Belt (C-1) *[22] [22] F Brake Assembly (HI) B DM2H, DM12H *(L-6) [23] [24] Worm Holder Pulley Assembly (HI) Mode Gear (LM) B B B [26] [20],[25] Mode Lever (HI) B Cam Gear (A) (HI) B TR Gear C TR Gear Spring TR Gear A/B B B B DM2H, DM13H-1 DM2H, DM13H-1 DM2H, DM13H-1 DM2H, DM13H-1, DM13H-2 DM2H, DM13H-1, DM13H-2 DM2H, DM13H-1 DM13H-1 DM13H-1 (S-9), *(L-7), *(L-8) [25] [22] [22] [25] [27] [28] [29] [30] [22],[23], [26] [26] [28] [29] 2-4-10 INSTALLATION ADJUSTMENT CONDITION (S-5) (C-2) (C-3) (C-4) (+)Refer to Alignment Sec.Page 2-5-2 (C-5) T6450DA STEP START/LOC. ING No. No. PART Fig. No. B B B DM1H, DM14H DM1H, DM14H DM2H, DM14H B DM2H, DM14H B DM2H, DM14H [16],[26] M Brake (TU) Assembly T (HI) DM1H, DM15H [37] [2],[26] M Brake (SP) Assembly T (HI) DM1H, DM15H [38] [37] Tension Lever Assembly T DM1H, DM15H [31] [32] [33] [31] [26] [26] [34] [26] [35] [34] [36] FF Arm (HI) Idler Assembly (HI) BT Arm Loading Arm (SP) Assembly Loading Arm (TU) Assembly REMOVAL REMOVE/*UNHOOK/ UNLOCK/RELEASE/ UNPLUG/DESOLDER [39] [40] [41] [38] T Lever Holder [40] M Gear (HI) [15],[40] Sensor Gear (HI) T T T DM15H DM1H, DM15H DM1H, DM15H [42] [36],[40] Reel T T DM1H, DM15H Reel S T DM1H, DM15H ADJUSTMENT CONDITION *(L-9) *(P-5) (+)Refer to Alignment Sec.Page 2-5-2 (+)Refer to Alignment Sec.Page 2-5-2 *(P-6) *(L-10) (C-6) (C-7) [43] [38] [44] [34],[38] Moving Guide S Preparation T DM1H, DM16H [45] [35] Moving Guide T Preparation T DM1H, DM16H [46] [19] TG Post Assembly T DM1H, DM16H *(L-11) [47] [27] Rack Assembly R DM17H *(P-9) [48] [47] F Door Opener R DM17H [49] [49] Cleaner Assembly T DM1H, DM6H [50] ↓ (1) [49] ↓ (2) CL Post T DM6H ↓ ↓ (4) (5) ↓ (3) INSTALLATION (+)Refer to Alignment Sec.Page 2-5-2 *(L-12) ↓ (6) ↓ (7) (1): Follow steps in sequence. When reassembling, follow the steps in reverse order. These numbers are also used as identification (location) No. of parts in the figures. (2): Indicates the part to start disassembling with in order to disassemble the part in column (1). (3): Name of the part (4): Location of the part: T=Top B=Bottom R=Right L=Left (5): Figure Number (6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered. P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder e.g., 2(L-2) = two Locking Tabs (L-2). (7): Adjustment Information for Installation (+):Refer to Deck Exploded Views for lubrication. . * [ 22 ] F Brake Assembly (HI) is not used in 2 head model. 2-4-11 T6450DA Top View [7] [44] [45] [49] [9] [46] [8] [14] [13] [11] [15] [38] [10] [12] [37] [36] [43] [32] [41] [31] [40] [42] Fig. DM1H Bottom View [19] [35] [34] [25] [23] [24] [26] [27] [22] [28] [20] [33] Fig. DM2H 2-4-12 T6450DA A [3] (S-1) [4] (S-1) [1] (L-1) (L-3) [5] B (L-2) (S-1A) [6] (P-1) Installation of [3] and [6] First, insert [6] diagonally in [3] as shown below. Then, install [6] in [3] while pushing (L-1) in a direction of arrow. After installing [6] in [3], confirm that pin A of [3] enters hole A of [6] properly. Fig. DM3H [3] Pin D Pin C 1 [2] View for A A [6] 2 Hole A Pin A Installation of [4] and [6] 1 Slide 2 Pull up Install [6] in [4] while pulling (L-2) in a direction of arrow. After installing [6] in [4], confirm that pin B of [4] enters hole B of [6] properly. (S-10) Pin A (L-1) [4] Pin B Slot A View for B Hole B Pin B [6] (L-2) Fig. DM5H Slots B Slot A First, while pushing the locking tab as shown in the right, slide and pull up the right side on [2] to release Pin A and Pin B from the slots A. Then, remove Pin C and Pin D on [2] from the slots B as shown. Locking tab View for A Fig. DM4H 2-4-13 T6450DA [11] (L-4) (S-4A) [7] [49] (P-3) [13] [50] Removal of [11] 1) Remove screw (S-4A). 2) Unhook spring (P-2). 3) Release (L-4) while holding [12] with a finger. 4) Loosen a finger holding [12] and remove [11]. (L-12) [12] [10] (P-2) A (S-2) Pin of [12] A Pin of [10] Groove of [27] When reassembling [10] and [12], confirm that pin of [10] and pin of [12] are in the [27] groove of [27] as shown. Lead with Red Stripe Desolder from bottom View for A Fig. DM8H-1 Fig. DM6H View for A (S-4) [9] [8] A Desolder [8] from bottom (S-3) Lead with White Stripe LDG Belt View for A Fig. DM7H 2-4-14 T6450DA Installation of [13] and [12] [14] (S-5) (S-6) [13] Hook spring (P-3) up to [12] and [13], then install then to the specified position so that [12] will be floated slightly while holding [12] and [13]. (Refer to Fig. A.) [15] (P-3) [12] Fig. A Pin of [12] Install pin of [12] in groove of [27]. (Refer to Fig. B.) [27] Fig. DM9H [17] Groove of [27] (L-5) Fig. B (Top view) Notch of Hold [12] and [13] till groove of chassis pin of chassis looks and fit [13] in notch of chassis. Then, turn a few [13] while holding [12]. (Refer to Fig. C.) [13] [16] [18] turn (P-4) [12] Groove of pin of chassis Fig. C Install [11] and [10] while holding [12]. (Refer to Fig. DM8H-1.) Fig. DM8H-2 (S-7) Fig. DM10H 2-4-15 T6450DA [22] (S-8) turn (C-1) [20] (L-6) [21] A [19] Cap Belt Pin on [22] Installation position of Cap Belt [20] Cap Belt [27] Position of pin on [22] Fig. DM12H [19] View for A Fig. DM11H 2-4-16 T6450DA [26] Installation of [26] (C-3) Position of Mode Lever when installed Pin of [33] (S-9) Pin of [37] Pin of [36] (L-8) [23] (L-7) [24] Bottom View (C-5) (C-4) [28] [29] [26] (C-2) [27] [25] [30] Align [26] and [27] as shown. First groove on [27] [27] First tooth on [47] [27] When reassembling [27], meet the first groove on [27] to the first tooth on [47] as shown. Top View [31] Fig. DM13H-2 Fig. DM13H-1 (P-5) [31] Refer to the Alignment Section, Page 2-5-2. [35] [32] (L-9) [34] Fig. DM14H 2-4-17 T6450DA [38] [36] [43] (P-6) turn [39] (L-10) turn turn [42] (P-9) [48] [47] Slide [37] Fig. DM17H (C-7) [41] (C-6) [40] Fig. DM15H [44] [45] [46] (L-11) Slide Plate (S-11) Fig. DM16H 2-4-18 T6450DA ALIGNMENT PROCEDURES OF MECHANISM [ 14PV385/ (01, 07, 39) ] Alignment 1 The following procedures describe how to align the individual gears and levers that make up the tape loading/unloading mechanism. Since information about the state of the mechanism is provided to the System Control Circuit only through the Mode Switch, it is essential that the correct relationship between individual gears and levers be maintained. All alignments are to be performed with the mechanism in Eject mode, in the sequence given. Each procedure assumes that all previous procedures have been completed. Loading Arm (SP) and (TU) Assembly Install Loading Arm (SP) and (TU) Assembly so that their triangle marks point to each other as shown in Fig. AL2. Alignment 2 Mode Gear Keeping the two triangles pointing at each other, install the Loading Arm (SP) Assembly so that the last tooth of the gear meets the most inside teeth of the Mode Gear. See Fig. AL2. IMPORTANT: If any one of these alignments is not performed properly, even if off by only one tooth, the unit will unload or stop and it may result in damage to the mechanical or electrical parts. Triangle Marks Loading Arm (SP) Assembly Alignment points in Eject Position Last Tooth Top View Alignment 2 Loading Arm (TU) Assembly Most inside teeth of Mode Gear Alignment 1 Alignment 3 Mode Gear Fig. AL2 Alignment 3 Cam Gear (A) (HI), Rack Assembly Bottom View Install the Rack Assembly so that the first tooth on the gear of the Rack Assembly meets the first groove on the Cam Gear (A) (HI) as shown in Fig. AL3. Alignment 1 Alignment 2 Top View Cam Gear (A)(HI) Alignment 3 First tooth Fig. AL1 First groove Gear on Rack Assembly on the Cam Gear (A)(HI) Fig. AL3 2-5-2 T6450APM DECK EXPLODED VIEWS [ 14PV385/ (01, 07, 39) ] Deck Mechanism View 1 Mark Description Floil G-684G or Multemp MH-D (Blue grease) SLIDUS OIL #150 B2 B35 L1467 B494 L1191 B73 B9 B10 B553 B411 B567 L1053 B410 B74 L1051 Chassis Assembly Top View (Lubricating Point) B5 L1322 B501 L1450 L1450 B12 B121 B126 B11 B571 L1466 B8 B492 B37 Chassis Assembly Bottom View (Lubricating Point) Some Ref. Numbers are not in sequence. 2-6-4 T6450DEX Deck Mechanism View 2 Mark B587 B487 B521 B591 B416 Description Floil G-684G or Multemp MH-D (Blue grease) SLIDUS OIL #150 SANKOUL FG84M (Yellow grease) B590 B508 B499 B522 B573 B574 B585 L1406 B148 B3 B592 B558 B518 B564 B557 B31 B414 B572 B565 L1151 B525 B417 B568 B578 B133 B579 B551 B582 B580 A B491 B583 B579 B513 B488 B581 Bottom Side (Grease point) B559 View for A B507 B516 B52 Bottom Side (Grease point) Some Ref. Numbers are not in sequence. 2-6-5 T6450DEX Deck Mechanism View 3 Mark L1321 B347 Description Floil G-684G or Multemp MH-D (Blue grease) SLIDUS OIL #150 L1321 B355 B354 B483 L1341 B425 B482 B562 B300 B563 B313 L1474 B529 B360 B359 B361 B555 B561 B303 Some Ref. Numbers are not in sequence. B514 2-6-6 T6450DEX 2-7-3 14PV385/01 14PV385/07 14PV385/39 14PV235/07 14PV235/58 14PV235/01 Description CYLINDER ASS. LOADING MOTOR ASS. PULLEY ASS. PULLEY ASS.(HI) MOVING GUIDE S PREP. MOVING GUIDE T PREP. LOADING ARM(TU) ASS. LOADING ARM(SP) ASS. AC HEAD ASS. TAPE GUIDE ARM ASS. CAPSTAN MOTOR CAPSTAN MOTOR CAP BELT FE HEAD ASS. PRISM WORM PULLEY IDLER GEAR IDLER ASS.(HI) IDLER ARM TG CAP TG CAP MK6 C DRIVE LEVER(TU) F DOOR OPENER C DRIVE SPRING GUIDE HOLDER A SLIDER(TU) SLIDER(SP) CLEANER LEVER CLEANER ROLLER CL POST PINCH ARM(A) ASS.(4) PINCH SPRING M BRAKE(SP) ASS. M BRAKE(SP) ASS.(HI) M BRAKE(TU) ASS. M BRAKE(TU) ASS.(HI) TENSION SPG LOCK LEVER SPRING KICK PULLEY CASSETTE PLATE LOCK LEVER BAND BRAKE(SP) MODE LEVER MODE LEVER(HI) CAM GEAR(A) CAM GEAR(A)(HI) MODE GEAR MODE GEAR(LM) C DOOR OPENER T LEVER HOLDER WORM HOLDER CAM GEAR(B) REEL WASHER MK9 5*2.1*0.5 S BRAKE SPRING S BRAKE SPRING(HI) CAM WASHER P.S.W F 6*2.55*0.5 SCREW RACK 14PV135/58 9965 000 23417 9965 000 17217 9965 000 17191 9965 000 16631 9965 000 16632 9965 000 16633 9965 000 16634 9965 000 16635 9965 000 23553 9965 000 23382 9965 000 23554 9965 000 23367 9965 000 08593 9965 000 12210 9965 000 08555 9965 000 16640 9965 000 18128 9965 000 17193 9965 000 16642 9965 000 17194 9965 000 12368 4822 462 11189 9965 000 16643 9965 000 18129 9965 000 16645 9965 000 08445 9965 000 18130 9965 000 23555 9965 000 08449 9965 000 06561 9965 000 08450 9965 000 16648 9965 000 16649 9965 000 23419 9965 000 17218 9965 000 17196 9965 000 16651 9965 000 24008 9965 000 08457 9965 000 08458 9965 000 16653 9965 000 16654 9965 000 16655 9965 000 23420 9965 000 18145 9965 000 17199 9965 000 16657 9965 000 16658 9965 000 19636 9965 000 16659 9965 000 16660 9965 000 16661 9965 000 17200 9965 000 05342 9965 000 08470 9965 000 17219 9965 000 17201 4822 532 13158 9965 000 08641 14PV135/07 h 12 NC 14PV135/01 DECK PARTS LIST Pos. B2 B3 B8 B8 B9 B10 B11 B12 B31 B35 B37 B37 B52 B73 B74 B121 B126 B133 B133 B134 B148 B148 B300 B303 B313 B347 B354 B355 B359 B360 B361 B410 B411 B414 B414 B416 B416 B417 B425 B426 B482 B483 B487 B488 B488 B491 B491 B492 B492 B494 B499 B501 B502 B507 B508 B508 B513 B513 B514 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2-7-4 14PV385/39 14PV235/07 14PV385/07 14PV235/01 14PV385/01 14PV135/58 14PV235/58 14PV135/07 Description REEL WASHER MK9 5*2.1*0.5 P.S.W CUT 1.6X4.0X0.5T TU BRAKE SPRING REV BRAKE SPRING REV BRAKE SPG(HI) TG POST ASS. TG POST ASS. LDG BELT CLEANER ASS. FF ARM(HI) REV SPRING RACK ASS. MOTOR PULLEY LOADING MOTOR CLUTCH ASS. CLUTCH ASS.(HI) KICK SPRING F DOOR SPRING C DRIVE LEVER(SP) SLIDER SHAFT M GEAR M GEAR(HI) SENSOR GEAR SENSOR GEAR(HI) PINCH ARM(B) BT ARM CAM HOLDER(F) CAM RACK SPRING(HI) P.S.W CUT 1.6X4.0X0.5T P.S.W CUT 1.6X4.0X0.5T REEL(SP)(D2) REEL S REEL(TU)(D2) REEL T TR GEAR A TR GEAR B TR GEAR C CENTER GEAR TR GEAR SPRING CAM WASHER PSW(317505) TENSION LEVER ASS. BRAKE ARM(TU) BAND BRAKE(TU) TG POST TG POST SCREW, B-TIGHT M2.6X6 PAN HEAD+ SCREW, S-TIGHT M2.6X8 WASHER HEAD+ SCREW, SEMS M2.6X4 PAN HEAD+ SCREW, S-TIGHT M2.6X8 WASHER HEAD+ SCREW, S-TIGHT M3X6 BIND HEAD+ SCREW, P-TIGHT M2X6 PAN HEAD+ AC HEAD SCREW MK9 SCREW, SEMS M2.6X5 PAN HEAD+ SCREW, S-TIGHT M2.6X6 BIND HEAD+ SCREW M2.6X5 WASHER HEAD+ SCREW, P-TIGHT M2.6X12 WASHER HEAD+ 14PV135/01 DECK PARTS LIST Pos. h 12 NC B516 9965 000 05342 B518 4822 532 13159 B520 9965 000 17202 B521 9965 000 16662 B521 9965 000 17220 B522 9965 000 12373 B522 9965 000 08483 B525 9965 000 12230 B529 9965 000 08504 B551 9965 000 17221 B553 9965 000 12233 B555 9965 000 16663 B557 9965 000 08519 B558 9965 000 18131 B559 9965 000 17204 B559 9965 000 16664 B560 9965 000 08522 B561 9965 000 08523 B562 9965 000 16665 B563 9965 000 16666 B564 9965 000 17205 B564 9965 000 16667 B565 9965 000 17206 B565 9965 000 16668 B567 9965 000 16669 B568 9965 000 16670 B569 9965 000 17207 B570 9965 000 12240 B571 4822 532 13159 B572 4822 532 13159 B573 9965 000 17208 B573 9965 000 12241 B574 9965 000 17209 B574 9965 000 12376 B578 9965 000 12243 B579 9965 000 16671 B580 9965 000 19638 B581 9965 000 16673 B582 9965 000 23374 B583 9965 000 17201 B585 9965 000 13687 B587 9965 000 16674 B590 9965 000 18132 B591 9965 000 17210 B592 9965 000 17211 B592 9965 000 16678 L1051 9965 000 05359 L1053 9965 000 05375 L1151 9965 000 08642 L1191 9965 000 05375 L1321 4822 502 14009 L1341 9965 000 23375 L1406 9965 000 08643 L1450 4822 502 14671 L1466 9965 000 05364 L1467 9965 000 23376 L1474 4822 502 14019 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1