Download Acer B243HL Service manual

Acer
Acer –LCD-B243HL
Service Manual
LCD Monitor Acer B243HL
-0-
1
Table of Contents
Important Safety Notice
........................................................................................02
01
Product Specification ..........................................................................................03
02
Flat Panel Specification ......................................................................................21
03
Exploded Diagram ..............................................................................................47
04
Troubleshooting ....................................................................................................49
05
Spare Parts List ..................................................................................................54
06
Schematics and Layouts ......................................................................................58
07
Assembly and Disassembly ................................................................................73
Appendix : User’s manual
Copyright
Copyright 2006 InnoLux Tech. Corp. Ltd
All Rights Reserved
This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any
electronic or machine readable form without prior written permission of InnoLux Tech. Corp. Ltd.
Acer B243HL Service Manual
1
Acer
Acer –LCD-B243HL
Important Safety Notice
1.
Safety precautions
This monitor is manufactured and tested on a ground principle that a user’s safety comes first.
However, improper used or installation may cause damage to the monitor as well as to the user.
Warning:
This monitor should be operated only at the correct power sources indicated on the label on the
rear of the monitor. If you’re unsure of the power supply in you residence, consult your local dealer
or Power Company.
Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor
should only be repaired by a qualified technician.
Do not remove the monitor cabinet. There are high-voltage parts inside that may cause electric
shock to human bodies.
Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable
immediately and consult your closed dealer.
Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the class screen.
Do not place heavy objects on the monitor or power cord.
z
z
z
z
z
z
z
2. Product safety notice
Many electrical and mechanical parts in this chassis have special safety visual inspections and the
protection afforded by them cannot necessarily be obtained by using replacement components rated
for higher voltage, wattage, etc. Before replacing any of these components read the parts list in this
manual carefully. The use of substitute replacement parts, which do not have the same safety
characteristics as specified in the parts list, may create shock, fire, or other hazards.
3. Service notes
z
When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
z
Keep wires away from high voltage, high temperature components and sharp edges.
z
Keep wires in their original position so as to reduce interference.
z
Adjustment of this product please refers to the user’ manual.
2
Acer
Acer –LCD-B243HL
01 Product Specification
1. General:
Acer B243HL is designed with LVDS interface and VGA/DVI-D input, it featured with embedded
universal AC power supplies and audio input. It’s a green product and meets all ROHS standard. The
power button and display control buttons are on the front of the monitor. The monitors shall
automatically to display lower resolution video modes into 1920x1080 full screen display. The image
can be adjusted through OSD control. It support HDCP and color management function.
1.1 Main Features
1.1.1 For AUO M240HW01-V0 panel
Maximum resolution
: 1920(x3) x 1080 @ 60Hz
Back light system
: 2 bar Led
Pixel pitch
: 276.75 um (H) x 276.75 um (V)
Display area
: 531.36mm (H) x 298.89mm (V)
Brightness
: 250cd/m² (TYP.)
Contrast ratio
: 1000‫׃‬1 (TYP.)
ACM
:80000:1 (Max)
Response time (Tr+Tf)
: 5ms (TYP. ON/OFF)
Viewing angle
: 170° (H)/ 160°(V), (TYP.)
Input interface
: Analog (D-sub 15 pin)
Digital Option (DVI-D 24 pin )
Power management
: Compatible with VESA DPMS
Plug & Play
: VESA DDCCI
OSD language
: English, French, Spanish, Italian, Deutsch,
Simplified Chinese, Traditional Chinese, Japanese
(Dutch, Finnish, Russian depend on sale region)
Universal AC power supply
1.1.2 Other main function features
z Input interface : VGA/DVI/USB upstream
z VGA input
: D-Sub
z DVI input : DVI-D
z USB
: Support USB2.0 (optional function)
1.2 Accessories
AC Power Cord
: 1.8 m. (Black. Cord type depend on sale region)
VGA cable
: 1.8 m. (15 pin D-SUB, black cable with blue male connector)
User manual
: English (640Mb CD)
DVI cable (option)
: 1.8 m. (18+1 pin, black cable with white connector)
3
Acer
Acer –LCD-B243HL
USB cable(option)
: 1.8m.(4pin, black cable with white connector)
Audio cable(option)
: 1.8m.( green cable with white connector)
2. Operation Specifications
The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality
during exposure to the operating conditions and after exposure to the non-operating conditions, in any
sequence.
2.1 Environmental conditions
Operating
Specification
0°C (Relative Humidity is as low as possible), 12 hrs.
Low Temperature
High Temperature
+40°C / 20% R.H., 12 hrs.
High Humidity
+32°C/ 80% R.H., 12 hrs
Altitude
12,000 feet at 25°C (hold 3.5 hrs)
Storage
-30°C / humidity not controlled
Low Temperature
High temperature &low humidity +65°C/ 10% R.H.
Test Profile
Max. Wet Bulb Temp
Altitude
+25°C/ 50%R.H.(2hrs)-> -30°C/ No R.H.(12hrs).-> +41°C/ 90%
R.H.(12hrs)->+65°C/ 10% R.H.(12 Hrs)->+25°C/ 50% R.H.(2hr)
39°C
40,000 feet at -30 °C (hold 1 hr)
Notice:1.Altitude Ramp rate: <= 3,500 feet per minute
2. Packed properly with PE bag, cushion material, carton & seal tape
3. power off when test storage
4
Acer
Acer –LCD-B243HL
2.2 Safety, EMC, Ergonomics and Compatibility Requirements
Items
Safety
EMC
Ergonomics
Compatibility
Power
Management
Description
UL/c
CB
●
●
FCC
CE
●
●
TCO TCO03
●
●
Windows
●
Energy Star
●
TUV/G
●
CCC
●
CCC
●
VCCI-B
●
Windows 2000
●
Other
Windows
●
Windows
●
2.3 Electrostatic Discharge Requirements
Item
Electrostatic
Discharge
Condition
Spec
Contact discharge: 4KV
IEC61000-4-2(EN55024) Contact discharge: 8KV
Air discharge
: 8KV
Air discharge
: 15KV
2.4 Reliability
Items
MTBF
LED Life time
Condition
Operating condition
is 25°C
Stable condition at
25℃
Spec
Note
>15,000 Hours
15,000 Hours(Typ)
Note1. Operating with fixed driving current.
5
Note1
●
●
Acer
Acer –LCD-B243HL
3. Electrical and Optical Characteristics and Performance
3.1 Main Power Supply
3.1.1 Input characteristics
Items
Condition
Spec
AC Input Voltage range
Universal input full range
90~264Vac
AC Input Voltage rating
Universal input full range
100~240Vac
AC input frequency range
90~264Vac
47~63Hz
AC input frequency rating
100~240Vac
50~60Hz
AC Input Current
100Vac
1.5A(max)
240Vac
0.6A(max)
115Vac,cold star,25°C
35A (max)
230Vac,cold star,25°C
70A(max)
DC output full loading
≥80%
Inrush Current
AC-DC power Efficiency
Note2.
Note
See Note2
Before each test, the buck capacitor need to be discharged.
Before each test, it must be 10 minutes at least after the latest test.
Hot star not component be damaged.
3.1.2 Output characteristics
Items
Ripple and Noise
DC Output Voltage
Condition
Spec
+25V output
+5V output
<1500mv
<300mv
Audio 5V output
USB +5V output
<500mv
<150mv
+25V output
<480mv
+5V output
<100mv
Audio 5V output
<100mv
USB +5V output
<100mv
25V loading:0.1A~0.8A
5V loading:0.75A~3.2A
Audio 5V: 0A~1A
USB 5V: 0A~2A
Vcc25V:23.5V~29V
Vcc5V: 4.85V~5.35V
Audio 5V: 4.5V~5.5V
USB 5V: 4.75V~5.25V
25v loading:0A
5V loading: 0.1A
Vcc25V: 23.5V~30V
Vcc5V: 4.85V~5.35V
Vcc5V/3.2A,
Vcc25V/0.8A
Audio 5V: 1A
USB 5V: 2A
<50mS
AC input: 100V~240V
>10mS
DC output loading
capability
Rise Time
Note
With system See note 3
With dummy Load
For system active
For power saving or DC
off
Dynamic load change
Hold-up time
Overshoot
<10%
Turn on delay time
2S
Power management
See Table-1
Note3: Paralleled a 0.1uF ceramic Cap. And 47uF aluminum Cap. Between the end of DC loading side,
Measured band-width=20MHz. Ripple voltage of +25V is less than 1500mv when enter into burst mode.
3.1.3 Protection characteristics
6
Acer
Acer –LCD-B243HL
Protection
Condition
Spec
OPP(Over current protection)
nominal AC input
60W ( min )
SCP(short circuit protection)
with auto-recovery function
OVP(Over voltage protection)
Auto recovery
OTP(Over temperature protection)
NA
Fuse protection
NA
<output capacitor voltage
Table-1
Status
H-sync
Power on
Power Saving
Power Off
V-sync
Video
Power
on
on
active
≤ 50W
Blue
off
on
blanked
< 2W
Amber
on
off
blanked
< 2W
Amber
off
off
blanked
< 2W
Amber
--
--
--
< 1W
Off
3.2 Backlight Power Supply
Panel: M240HW01-V6
Items
Specification
Lamp
2 Bar LED
Input Voltage
23.5---29V
Input current
0.6A (Typ.),0.8A (Max.)
On/Off switch level
3.6V≧V on≧ 2.0 V (on)
-0.3v ≤ V off ≤ 0.8 V (off)
Brightness PWM Duty (ACM Off)
30%~100%
Brightness PWM Duty (ACM On)
1%~100%
LED Voltage
42.9Vrms (Typ.), 44.2Vrms(Max)
LED Current
20mA (Type.)
25mA (Max.)
Efficiency
LED
>75%
Note: Other panels please refer to the reference panel specs.
7
Acer
Acer –LCD-B243HL
3.3 Brightness output
The test to verify specifications in this section shall be performed under the following standard conditions
unless otherwise noted.
Temperature
: 25 ± 5°C
Test pattern
: white
Video Resolution
: 1920 x 1080
Video input level
: 700 mV ± 2%
Warm-up time
: 30 minutes
Set brightness control and also contrast control at maximum, to measure the screen center, the light
output shall BL ≥ 200 cd/m2 .
3.4 White balance
The test standard conditions refer to Sec 3.3. (Brightness and contrast are under default value)
Mode
Cool
Warm
User
9300K
6500K
Chromaticity Coordinate
x
y
0.283 ± 0.030
0.297 ± 0.030
0.313 ± 0.030
0.329 ± 0.030
Panel While x
Panel While y
8
Acer
Acer –LCD-B243HL
3.5 Brightness uniformity
The test standard conditions refer to Sec 3.3.
Min. luminance of nine points (backlight)
≥75%
Max. luminance of nine points (backlight)
4. Input / Output Signal Specifications
4.1 AC in
4.1.1
AC Input Voltage: 100~240VAC
4.1.2
AC Input Current: 1.2A @100Vac, 0.6A @240Vac
4.1.3
AC Frequency Range: 50~60Hz
4.2 Audio in
4.2.1
Input impedance ﹕ ≧ 10K ohm
4.2.2
Frequency response range ﹕200Hz ~ 10kHz
4.3 USB in
The USB 2.0 includes 4 pins:
pin1:VBUS;
pin2:DM;
pin3:DP;
pin4:GND
4.4DVI-D in
DVI-D Connector Pin assignment:
9
Acer
Acer –LCD-B243HL
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Symbol
TMDS Data 2TMDS Data 2+
TMDS Data 2/4 shield
Pin
16
17
18
19
20
21
22
23
24
DDC Clock
DDC Data
Analog Vertical Sync
TMDS Data 1TMDS Data 1+
TMDS Data 1/3 shield
TMDS Data 3TMDS Data 3+
+5V Power
GND
Symbol
Hot Plug Detect
TMDS Data 0TMDS Data 0+
TMDS Data 0/5 shield
Clock shield
Clock +
Clock -
4.5 VGA in
4.5.1
D-sub Connector Pin assignment:
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Symbol
Red Video
Green Video
Blue Video
N/C
Ground
Red Ground
Green Ground
Blue Ground
PC +3.3/+5V
Sync. Ground
N/C
DDC SDA
H sync
V sync
DDC SCL
10
Acer
4.5.2
Acer –LCD-B243HL
Signal SPEC:
Items
Analog RGB signal
Sync
H-Sync Frequency
V-Sync Frequency
Condition
Specification
Input impedance =75 Ohm
Input impedance ≧1k Ohm
0.7Vp-p
TTL level, Separate H/V-sync(+/-)
30K~80KHz
55~75Hz
4.6 Timing table
Mode
MAC
VESA
SVGA
XGA
VESA
SXGA
VESA
WXGA
WXGA+
WSXGA+
UXGA
Note:
Resolution
(active dot)
Resolution
Horizontal
Vertical
(total dot) Frequency (KHz) Frequency (Hz)
Nominal Pixel
Clock (MHz)
Write in EDID
640x480@60Hz
640x480@72Hz
[email protected]
720x400@70Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
1024x600@60Hz
1024x768@60Hz
1024x768@70Hz
1152x864@75Hz
1280x960@60Hz
1280x1024@60Hz
1280x720@60Hz
1280x800@60Hz
1360x768@60Hz
1440x900@60Hz
1680x1050@60Hz
1600x1200@60Hz
800 x 525
832 x 520
864x525
900x449
1024 x 625
1056 x 628
1040 x 666
1312x622
1344x806
1328x806
1600x900
1800x1000
1688x1066
1650x750
1680x831
1792x795
1904x931
2240*1089
2160x1250
31.469
37.861
35
31.469
35.156
37.879
48.077
37.320
48.363
56.476
67.5
60
63.981
44.955
49.702
47.712
55.935
65.290
75.000
59.941
72.809
66.66
70.087
56.250
60.317
72.188
60.000
60.004
70.069
75
60
60.020
59.940
59.810
60.015
59.887
59.954
60.000
25.175
31.500
30.24
28.322
36.000
40.000
50.000
48.964
65.000
75.000
108
108
108.000
74.176
83.500
85.500
106.500
146.250
162.000
23H
N/A
23H
23H
23H
23H
N/A
N/A
24H
24H
26H~27H
N/A
2EH~2FH
N/A
28H~29H
N/A
2AH~2BH
N/A
N/A
1920x1080@60Hz
2576x1120
67.158
59.963
173.000
2C~2D
1920x1080@60Hz
2200x1125
67.500
60.000
148.500
36H~46H
1920x1080@60Hz
2080x1111
66.587
59.934
138.500
1. Non-interlace signals only (An interlace signal cannot be display)
2. Please refer to F/W specification for more detail
3. Each frequency of Power Macintosh and Sun Ultra is a reference value
11
Acer
Acer –LCD-B243HL
4.7 Audio output SPEC
Specification
Items
TEST CONDITIONS
Min
TYP
MAX
Output power (W)
1.6
2.0
2.4
THD+N = 10%﹐T 1KHz 1Vrms
Output impedance (Ω)
3.4
4
4.6
AT 1KHz 1Vrms
Total harmonic distortion plus noise
---
---
10%
Signal to noise ratio (dB)
40
---
---
PWM frequency (KHz)
200
250
300
Po≦ 2.0W
THD+N≦ 5%
Note: The low pass RC Filter (R=100Ω / C=0.047uF) for Class-D Output Power and THD+N Measurement
4.8 DDC data
EDID File Format : VESA’s EDID Standard Version #3, Revision #0,
EDID Structure
: Version #1, Revision #3.
EDID Data Table : See the attached table (for example)
12
Acer
4.8.1
4.8.2
Acer –LCD-B243HL
VGA EDID table
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
00
FF
FF
FF
FF
FF
FF
00
04
72
D3
00
40
85
40
85
1
36
12
01
03
08
35
1D
78
EA
60
85
A6
56
4A 9C
25
2
12
50
54
B3
0C
00
71
4F
81
00
95
00
D1
C0
81
80
3
01
01
01
01
01
01
02
3A
80
18
71
38
2D
40
58
2C
4
45
00
13
2A
21
00
00
1A
00
00
00
FC
00
42
32
34
5
33
48
4C 0A
20
20
20
20
20
20
00
00
00
FD
00
37
6
4B
1E
50
12
00
0A
20
20
20
20
20
20
00
00
00
FF
00 4C 38
7
DVI EDID table
35
34
4C
38
35
34
34
30
31
30
0A
00
CS
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
00
FF
FF
FF
FF
FF
FF
00
04
72
D3
00
40
85
40
85
1
36
12
01
03
80
35
1D
78
EA
60
85
A6
56
4A 9C
25
2
12
50
54
B3
0C
00
71
4F
81
00
95
00
D1
C0
81
80
3
01
01
01
01
01
01
02
3A
80
18
71
38
2D
40
58
2C
4
45
00
13
2A
21
00
00
1A
00
00
00
FC
00
42
32
34
5
33
48
4C 0A
20
20
20
20
20
20
00
00
00
FD
00
37
6
4B
1E
50
12
00
0A
20
20
20
20
20
20
00
00
00
FF
7
00
4C
38
35
34
4C
38
35
34
34
30
31
30
0A
00
CS
13
Acer
Acer –LCD-B243HL
5. Function Specifications
All the tests to verify specifications in this section shall be performed under the following standard
conditions unless otherwise noted. The standard conditions are:
Temperature
: 25 ± 5°C
Warm-up time
: 30 minutes minimum
Checking display modes
: All the specified modes
5.1 Panel general specifications
5.1.1 General specifications
Item
Describe
Supplier
AUO
Model name
M240HW01-V6
Display Area
531.36 × 298.89
Pixel Pitch
276.75(Per one triad) × 276.75
Display Colors:
16.7M colors (RGB 6-bit + Hi_FRC)
Number of Pixel
1920 × 1080
Pixel Arrangement
R.G.B. Vertical Stripe
Brightness
250 cd/m2 (TYP.)
Contrast Ratio
1000 (TYP.)
Viewing Angle
170(Horizontal) / 160(Vertical)
Display Mode
Normally White
Frame rate
75
Response Time
5ms (TYP. ON/OFF)
Surface Treatment
Anti-Glare, 3H
Lamp
2 Bar LED
Outline Dimension
556.0(W) ×323.2(H) ×9.9(D)
14
(TYP.)
Acer
Acer –LCD-B243HL
5.1.2 LCD module defects
LCD module defects check follow to the IIS.
5.2 Keypad Function
5.2.1 Control buttons
[POWER]
Power on or power off the monitor
[►], [◄]
A. When “Main OSD” displays, press these keys to change the contents of an adjustment
item, or change an adjustment value
B. When “Main OSD” un-displays, press [►] to show “Audio” OSD and increase the
volume, press [◄] to show “Audio” OSD and decrease the volume .
[MENU]
A. When “Main OSD” un-displays, press [MENU] to enter OSD interface.
B. When “Main OSD” displays, press [MENU] to perform function of menu icon that is
highlight or enter next level menu.
[AUTO]
A. When “Main OSD” un-displays, press [AUTO] to perform auto-adjustment
B. When “Main OSD” displays, press [AUTO] to return to previous level menu
C. When “Empowering Technology OSD” displays, press [AUTO] to exit the OSD
[e Color ]
A. When “Main OSD” un-displays, press [e Color] to show “Empowering Technology OSD”.
B. When “Main OSD” displays, press [e Color] to exit the OSD, and to show “Empowering
Technology OSD”
5.2.2 Hot Key Operation
HOT KEY OPERATION
FUNCTION
FACTORY
MODE
e Color AUTO MENU ◄ ► POWER
●
ON
15
DESCRIPTION
Press [e], and then press [POWER]
for DC power on. OSD menu will be
shown with “F” on the left top. Select
“F” for entering factory mode.
Acer
Acer –LCD-B243HL
5.3 OSD Structure
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD
buttons or remote control unit. The unit shall leave the factory with all OSD controls set to their default
values.
First
Second
Third
ACER eColor Management
empowering
Control Range
---
Technology
Contrast
0 ~ 100
Brightness
User
Brightness
0 ~ 100
Default Value
Standard mode
User mode
50
Text mode
50
Standard mode
50
Graphics mode
60
Movie mode
User mode
56
77
Text mode
44
Standard mode
77
Graphics mode
97
Movie mode
77
ACM
Image
Position
Focus
Clock
H. Position
V. Position
Warm (6500K)
Cool (9300K)
Color
User
Language
NO-EMEA
EMEA
English
English
Deutsch
Deutsch
Español
Español
简体中文
Dutch
繁體中文
Russian
Français
Français
Italiano
Italiano
日本語
H. Position
OSD
V. Position
OSD Timeout
Input Source
(Dual)
Analog
Digital
Finnish
OFF
-------------
0 ~ 100
Depend on each timing
0 ~ 100
50 ○
1
0 ~ 100
50
0 ~ 100
Depend on each timing
Red
0 ~ 100
80
Green
0 ~ 100
80
Blue
0 ~ 100
80
---------------
---------------
---
---
-----------
0 ~ 100
50
0 ~ 100
50
10~ 120
20
-----
-----
-----
16
English
Acer
Acer –LCD-B243HL
Input Source
(Analg only)
Wide Mode Full/ Aspect
Full
DDC/CI ON/OFF
ON
Full
ON
--------ETL000….0000(22)
-----
Wide Mode Full/ Aspect
DDC/CI ON/OFF
Resolution
H. Freq
Info
V. Freq
Analog/Digital Input
---------
---------
-----
-----
S/N
Reset
Exit
-----
Notes: (1) Clock default 50 is for Visa timing. Others depend on timing.
(2) Depend on timing & S/N
6. SOP of firmware upgrade (Manufacturer of Scaler is Mstar)
6.1 Operational condition:
Equipment: PC, ISP card, signal cable and power cable.
ESD requirements:
antistatic wrists, antistatic gloves (fingers), and connecting cable
Name of ISP program: ISP_Tool_v3.7.5.exe
Manufacture of FW IC：PMC/SST/MX
6.2
Operational steps:
1. Connection: connect PC to PCBA with signal cable, and then keep AC and DC in open state.
One port of ISP
program card
is connected to
PC print port.
2. Adjust ISP programming
Firstly, double click ISP_Tool_v3.7.5EXEI and open ISP program, then select “Device”, next select
manufacturer model of FW IC, which should be correspondent with that of PCBA FW IC. Double click Figure
One.
17
Acer
Acer –LCD-B243HL
FW IC
Model
Secondly﹐download FW software:
(Fig.2).
first select “READ”, and then load FW software in Rooter
FW software
rooter
Software
Checksum
Thirdly, select “Connect” and enter ISP MODE as in the following Figure 3.
18
Acer
Acer –LCD-B243HL
Fourthly, select “AUTO”, and keep its default value. Click “RUN” for beginning programming. There
will be prompting if programming is OK.
Note: if programming fails or success rate is not high, click “Config” and adjust its speed in
“E2PROM DEVICE SETTING”
19
Acer
Acer –LCD-B243HL
After connecting, AC ON,
DC ON
◆Flowing chart
OK
Open ISP program
OK
Choose manufacturer
and model of FW IC
OK
LOAD FW software
OK
Click Connect and enter
ISP MODE
OK
Choose Config
and adjust
programming
Click AUTO and RUN for
beginning programming
OK
NG
Turn off power if
programming is OK
20
Acer
Acer –LCD-B243HL
02. Flat Panel Specification
17
Acer
Acer –LCD-B243HL
19
Acer
Acer –LCD-B243HL
20
Acer
Acer –LCD-B243HL
18
Acer
Acer –LCD-B243HL
21
Acer
Acer –LCD-B243HL
22
Acer
Acer –LCD-B243HL
23
Acer
Acer –LCD-B243HL
24
Acer
Acer –LCD-B243HL
25
Acer
Acer –LCD-B243HL
26
Acer
Acer –LCD-B243HL
27
Acer
Acer –LCD-B243HL
28
Acer
Acer –LCD-B243HL
29
Acer
Acer –LCD-B243HL
30
Acer
Acer –LCD-B243HL
31
Acer
Acer –LCD-B243HL
32
Acer
Acer –LCD-B243HL
33
Acer
Acer –LCD-B243HL
34
Acer
Acer –LCD-B243HL
35
Acer
Acer –LCD-B243HL
36
Acer
Acer –LCD-B243HL
37
Acer
Acer –LCD-B243HL
38
Acer
Acer –LCD-B243HL
03 Exploded Diagram
3.1 B243HL_SCREW_LIST
Fixed
Item
Part No.
Description
Qty T(kg*cm
Remark
)
1
2
3
4
5
6
50914630610
2R
SCREW P CROSS W/W-SPR M3*6
Zn
1
3.75±0.25
FOR POWER
BOLT,#4-40x11.8,Ni
4
4.0±0.25
D-SUB CON&DVI
4
10.5±0.25
For back-cover to STAND ASSY
SCREW,B,CROSS,T.T-4*10,BLK ,ROHS
2
9.0±0.25
For hinge to stand-BACK
SCREW,P,CROSS,T.T4*6,Zn,ROHS
1
6.0±0.25
Plate base to Base
SCREW P CROSS W/WAS M3*6 ZN-Cc
6
3.75±0.25
FOR POWER&IF
50900000070
0R
50921660811 SCREW,F,CROSS,M4*8,Zn,ROHS(NYLO
0R
K,35F)
509412610500
R
50911260610
0R
50914630620
0R
3.2. LCD Exploded drawing (All)
39
Acer
Acer –LCD-B243HL
05 Spare Pare parts List
8241Q172A120H
ACER PART NO.
OEM PART NO
DESCRIPTION
NA
55.LH40J.001
793111300700H
PCBA,IF/B(V6,W/SPK,EMEA),LE24Q1-729
19.LH40J.001
793111400720H
PCBA,P/I BOARD,W/SPK,LE24Q1-729
19.LBN0J.001
791401500000R
PCBA,KEYPAD BOARD,LE9D0-612 ROHS
55.LGK0J.003
792680300000H
PCBA,USB BOARD,LE24Q2
40
Acer
Acer –LCD-B243HL
50.L63VF.003
453030300120R
CABLE AUDIO 1P 6FT BLACK/GREEN CP03B06P0
50.LA10J.003
453030300370R
CABLE,DVI-D 18+1P MALE 6FT BLACK , ROHS
50.LBQ0J.001
453010100380R
CABLE,D-SUB 15P MALE 6FT BLACK/BLUE, ROH
50.D030J.001
453030300360R
CABLE,USB 6FT BLACK ,
50.LGK0J.001
430303002440H
HRN LVDS FFC 30P 166.5MM W/ALUMINUM FO
50.LGK0J.002
430300802940H
HRN ASSY 2x4P to 8P 275mm UL3302#28 Con
50.LBP0J.001
430300801800R
HRN ASSY 2x4P 75mm UL1571#28,ROHS
60.LH40J.001
714030030100R
ASSY,BEZEL,FRONT,B,PRINTING,LE24Q1
41
Acer
Acer –LCD-B243HL
60.LDP0J.006
501020220030R
COVER HINGE,BLACK ,RIGHT,FOR ADJUST,LE19D
60.LDP0J.005
501020220031R
COVER HINGE,BLACK ,LEFT,FOR ADJUST,LE19D
60.LH40J.002
501020236213R
BACK COVER,B,AUO THIN LED,W/DVI+VGA+USB,
60.LH40J.003
501260214700R
STAND,B,,LE24Q1
60.LH40J.004
701000018213R
ASSY,CHASSIS,B,AUO THIN LED,W/DVI+VGA+US
LK.24005.016
631102240320HA
LCP 24"M240HW01-V6-00(A)(AUO)HF
42
Acer
Acer –LCD-B243HL
06 Schematics and Layouts
6.1 IF BD Layout
43
Acer
Acer –LCD-B243HL
I/F BD Layout
44
Acer
Acer –LCD-B243HL
6.2 Switching Mode Power Supply circuit
45
4
3
D107
VCC4.5V
BAT750-LF/NC
3
R173
1
DVI5V
2
Note 2
Note 1
CN101
8P 2.0mm
VCC5V
D101
SSM24APT/NC
VCC5V
C175 0.1/16V
ADJ
R101
0
C104
R0805 0.1/16V
+
VOUT
PAD
+3.3V
2
+3.3V
VOUT
VIN
4
PAD
+1.8V
C102
100u/16V
D
2
+1.8V
6
4
+
+
C105
0.1/16V
C106
0.1/16V
C103
22u/16V
C107
0.1/16V
GND
C108
0.1/16V
GND
Q103
PMBT3904
R107
100K
1
6 PANEL_ENABLE
C112
1u/16V
GND
Q104
PMBT3904
R108
47K
Q102
2N7002/NC
C110
R106
100K
2
6 CCFL_ENABLE
1
GND
C109
+
3
1
R109
100K
CCFL_ON/OFF
6
0.1/16V
R105
4K7
VLCD
R112
51/NC
R0603
1
10K
2
0.1/16V
ZD107 6V2/NC
C111
R103
3
R102
10K
C
VLCD
3
Note 4
VCC_ESD
Note 6
Q101
AP2305GN
2
3
VCC5V
100u/16V
+3.3V
R113
0
R0805
6
Note 5
C
VCC5V
3
GND
GND
ZD101
6V2/NC
U102
LD1117AL-1.8V
+3.3V
2
To Power/Inverter
Board
BRIGHTNESS 6
VOLUME 6
MUTE
6
C101
100u/16V
VIN
1
CCFL_ON/OFF
0/NC
R0805
U101
AP1084K33LA
3
DIO--SMA
1
2
3
4
5
6
7
8
C162 0.1/16V
CON--JWT-A2008WV08P-1
D
Note 3
1
ADJ
VGA5V
2
1
5
B
B
GND
Note:
1. CN101 is no locked packgae for normal model.CN101 is locked packgae for special model(Dell).
2. D101 must be co-layed with R101
3. U101 must contain TO263, TO252 and SOT223 package
4. ZD101 must be co-layed with R113. ZD101 is used for ESD back drive.Reserved C111 for EMI issue.
5. P/I Board High Enable.
6. Reserved R111,R112,Q102 for panel power discharge.
GND
MSTAR_TSUMU5PEHJ
InnoLux
Document Number :
COMMON
SIZE :
APPRO BY :
A4
TITLE :
A
CHECK BY :
POWER (DC TO DC)
2008-1-30
DATE :
SHEET
5
4
3
3
OF
2
6
DRAWN BY :
Rev :
V01
STONE
1
A
5
4
75 1%
75 1%
75 1%
R118
R119
R114
75 1%
C113 0.047u/16V
0
R115
75 1%
C114 0.047u/16V
0
R116
75 1%
C115 0.047u/16V
C117
C118
10p/50V/NC 10p/50V/NC
R122
75 1%
C119 0.047u/16V
R123
75 1%
C120 0.047u/16V
R124
75 1%
C121 0.047u/16V
VGA_DET
2
D103
BAV99
1
2
D104
BAV99
1
2
D105
BAV99
1
C127
C123
0.1/16V/NC
0.1/16V
C124
0.1/16V/NC
VCC_ESD
C125
0.1/16V/NC
GND
R126
0/NC
GND
R127
4K7
VGA_SCL
VGA_SDA
R131
R132
2K2
33p/50V
33p/50V
C130
GND
R136
GND
C129
R135
6V2
2K2
R133
R134
ZD106
6V2
6V2
ZD105
ZD104
ZD103
B
6V2
FB101
120Ω
HSYNC
VSYNC
R128
4K7
6
SOG
6
RED-
6
GREEN-
6
BLUE-
6
D106
BAV70
D
R129
10K
C
C128
0.1/16V
U103
AT24C02BN
R130
1K
8
7
6
5
VCC
WP
SCL
SDA
A0
A1
A2
GND
1
2
3
4
6
6
WP_EDID 5,6
DDC_SCL_VGA 6
DDC_SDA_VGA 6
B
C132
33p/50V/NC
MSTAR_TSUMU5PEHJ
InnoLux
Document Number :
SIZE :
COMMON
APPRO BY :
A4
TITLE :
A
CHECK BY :
VGA-INPUT
SHEET
3
STONE
DRAWN BY :
2008-1-30
DATE :
4
BLUE+
VGA5V
100
100
Note 5
Note:
1. R120 is reserved for Samsung model.
2. R0603 package for Bead. C116,C117,C118 are reserved for EMI or performance issue.
3. C122,C123,C124,C125 are reserved for ESD or EMI issue.
4. R126 is reserved for Samsung model.
5. C131,C132 are reserved for tuning performance issue.
5
6
GND
1K
1K
C131
33p/50V/NC
6
GREEN+
VGA_DET 6
3
C122
0.1/16V/NC
VCC5V
RED+
Note 4
1
D102
BAV99
1
3
VGA_DET
2
6V2
C126 0.1/16V
ZD102
C
2
1
0
C116
10p/50V/NC
3
Note 3
3
GND
RB101
R0603
RB102
R0603
RB103
R0603
3
R120
16
15
R117
14
0
D
0/NC
13
R121
12
2
Note 2
CN102
DZ11AA1-H5W6-4F
R
1
6
G
2
7
B
3
8
VGA5V
4
Note 1
9
5
10
17
11
3
4
OF
2
6
Rev :
V01
1
A
5
4
3
2
1
CN201
DVI-D_CON
R203
R204
10
10
DVI_RX0DVI_RX0+
R205
R206
10
10
DVI_RXC+
DVI_RXC-
R207
R208
10
10
SCL
SDA
VS
6
7
8
DVI_SCL
DVI_SDA
5V
GND
HP
RX4RX4+
GND
RX3RX3+
RX5RX5+
14
15
16
4
5
11
12
13
20
21
RX2RX2+
6
6
RX1RX1+
6
6
RX0RX0+
6
6
RXC+
RXC-
6
6
R215
0/NC
R211
4K7
C204
0.1/16V
B
C206
0.1/16V
C208
0.1/16V
C210
0.1/16V
VCC
WP
SCL
SDA
A0
A1
A2
GND
1
2
3
4
GND
C
Note 2
R217
10K
R218
100/NC
3
HPD_DVI
Q201
PMBT3904
1
2
6V2
C213 0.1/16V
6V2
D209
BAV99
1
DVI5V
ZD202
0.1/16V
C211
0.1/16V
8
7
6
5
DVI5V
ZD204
2
3
3
C209
0.1/16V
2
D210
BAV99
1
6V2
2
D207
BAV99
1
D208
BAV99
1
C212
D205
BAV99
1
2
3
3
C207
0.1/16V
3
3
2
2
D206
BAV99
1
ZD203
2
D203
BAV99
1
C205
0.1/16V
3
3
3
C203
0.1/16V
2
D204
BAV99
1
U201
AT24C02BN
WP_EDID 4,6
DDC_SCL_DVI 6
DDC_SDA_DVI 6
DVI_DET 6
DVI_DET
HPD_DVI
2
ZD201
R212 R213
4K7 10K
100
100
DVI_DET
HPD_DVI
D202
BAV99
1
D201
BAV70 C201
0.1/16V
R214
1K
R209
R210
DVI5V
D
Note 1
1
DVI_RX1DVI_RX1+
RX2RX2+
GND
RX1RX1+
GND
RX0RX0+
GND
RXC+
RXC-
DVI5V
2
10
10
3
1
2
3
9
10
19
17
18
22
23
24
R201
R202
6V2
C
VCC5V
DVI_RX2DVI_RX2+
C202 0.1/16V
D
R219
4K7
HPD_CTRL 6
HDCP Function
VCC_ESD
GND
B
GND
MSTAR_TSUM5PEHJ
InnoLux
Note:
1. R215 is reserved for Samsung model.
2. R218 is reserved for some model.
Document Number :
SIZE :
COMMON
APPRO BY :
A4
TITLE :
A
CHECK BY :
DVI-INPUT
2008-1-30
DATE :
SHEET
5
4
3
5
OF
2
6
DRAWN BY :
Rev :
V01
STONE
1
A
5
4
VDDP_33
+3.3V
Note 1
3
2
1
AVDD_33
C142
22u/16V
C143
C144
C145
C146
C147
0.1/16V 0.1/16V 0.1/16V 0.1/16V 0.1/16V
R159
9
10
12
13
15
16
18
19
5
6
5
RX2+
5
RX25
RX1+
5
RX15
Rx0+
5
RX05
RXC+
5
RXC5 DDC_SDA_DVI
5 DDC_SCL_DVI
GND
Note 2
VCC5V
AVDD_33
2
1
+3.3V
R164
R0603
0
2
R177
10K
Q107
PMBT3906
1
3
R165
330
R0603
3
R167
R0603
C158 22p/50V
1K
REFM
46
45
20K/NC
R157
100
R158
100
ADC_KEY1
ADC_KEY2
LED_B_C
LED_A_C
LED_G_C
VOLUME 3
MUTE
3
KEY2
VGA_DET 4
HPD_CTRL 5
KEY1
10K
10K
10K
10K
10K/NC
10K
10K
10K
10K/NC
R139
R140
R220
R179
R181
WP_FW
R188
D
GND
10K
R171
R172
R184
R174
58
54
114
40
59
87
107
112
60
65
66
71
103
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VCTRL
49
47
GPIO_P46/GPIO_P05
GPIO_P47/GPIO_P22
2 SDO
1 SCZ
6 SCK
5 SDI
41
42
43
44
SDO
CSZ
SCK
SDI
108
RST
0
128
XIN
R148
0
127
XOUT
10K/NC
37
10K
R149
102
C153 0.1/16V
R175
PANEL_ENABLE 3
CCFL_ENABLE 3
BRIGHTNESS 3
4K7
SCL_OSD
SDA_OSD
R216
1K
DVI_DET 5
WP_EDID 4,5
R146
WP_OSD
1K
BYPASS
MODE
CN103
FFC-CON
100
99
98
97
96
95
RXO0RXO0+
RXO1RXO1+
RXO2RXO2+
LVBCKM
LVBCKP
LVB3M
LVB3P
LVA0M
LVA0P
94
93
92
91
86
85
RXOCRXOC+
RXO3RXO3+
RXE0RXE0+
LVA1M
LVA1P
84
83
RXE1RXE1+
LVA2M
LVA2P
LVACKM
LVACKP
LVA3M
LVA3P
82
81
80
79
78
77
RXE2RXE2+
RXECRXEC+
RXE3RXE3+
LVB0M
LVB0P
LVB1M
LVB1P
LVB2M
LVB2P
RXO0RXO0+
RXO1RXO1+
RXO2RXO2+
LED_G_C
R169
10K
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
RXOCRXOC+
RXO3RXO3+
RXE0RXE0+
RXE1RXE1+
RXE2RXE2+
RXECRXEC+
RXE3RXE3+
Note5
R180
2
21
39
38
GPIO_P43/GPIO_P42
GPIO_P45/GPIO_P04
R147
VDDP_33
100/NC
1
3
LED_G
SO
CS#
SCK
SI
VCC
HOLD#
WP#
GND
C157 22p/50V
C164 1u/16V
R176
10K
R168
330
R0603
I2C_MCL/GPIO_P10
I2C_MDA/GPIO_P11
REFP
X101
14.31818MHz
VCC5V
Q108
PMBT3906
U108
100K
LED_A
GND
VCC4.5V
VCC4.5V
R153
GPIO_P04/GPIO_P03/PWM3 73
GPIO_P25/GPIO_P12/PWM3 109
GPIO_P13/PWM2/GPIO_P26/PWM2 125
PM25LV010A-100SCE
LED_A_C
R166
10K
1K
1K
R182
Note6
8
7
3
4
R191
1K
R192
10K
GPIO42/GPIO_P24 50
GPIO_P24/PWM2/GPIO_P27/PWM2 51
R125
R160
C166 0.1/16V/NC
TSUMU58EHJ-LF-1
GND
WP_FW
VCC5V
3
4
36
48
REXT
C165
0.1/16V
R189
R190
10K/NC 10K
GPIO_P15
GPIO_P16
GPIO_P22/PWM1/GPIO_P23/PWM1
GPIO_P44/GPIO_P41
VCC5V_DET
R154
1K
R155
1K
119
120
121
122
123
124
2
7
30
VCC5V
1
11
17
29
52
72
88
101
105
106
68
69
63
62
113
75
76
89
90
57
56
55
61
64
70
67
110
111
115
116
117
118
C
LED_B_C
R162
10K/NC
3
LED_B
C148
1u/16V
RX2P
RX2N
RX1P
RX1N
RX0P
RX0N
RXCKP
RXCKN
DDCD_SDA
DDCD_SCL
GPIO_P00/SAR0/GPIO_P17/SAR0
GPIO_P01/SAR1/GPIO_P00/SAR1
GPIO_P02/SAR2/GPIO_P01/SAR2
GPIO_P03/SAR3/GPIO_P02/SAR3
GPIO_P06
GPIO_P07
GPIO_P14/PWM0
31
390 1%
R161
10K
Q106
PMBT3906/NC
R163
330/NC
R0603
R144
53
74
104
126
10K
+
RIN0P
RIN0M
GIN0P
GIN0M
SOGIN0
BIN0P
BIN0M
HSYNC0
VSYNC0
DDCA_SDA/RS232_TX
DDCA_SCL/RS232_RX
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
LVA4P/GPO[7]
LVA4M/GPO[6]
LVB4P/NC
LVB4M/NC
NC/GPO[0]
NC/GPO[2]
NC/GPO[4]
NC
NC
NC
NC
NC/GPIO_P43
NC/GPIO_P25
NC
NC
NC
NC
60Ω
28
27
25
24
470 C152 0.047u/16V 26
23
22
32
33
34
35
AVDD_18
4
RED+
4
RED4
GREEN+
4
GREEN4
SOG
4
BLUE+
4
BLUE4
HSYNC
4
VSYNC
4 DDC_SDA_VGA
4 DDC_SCL_VGA
AVDD_18
FB105
VDDC
VDDC
VDDC
VDDC
8
14
20
GND
VDDC_18
+1.8V
+3.3V
VDDP_33
AVDD_18
R150
R151
R152
C141 0.1/16V
C161 0.1/16V
C149 0.1/16V
C139 0.1/16V
C138 0.1/16V
C137 0.1/16V
C136 0.1/16V
C135 0.1/16V
C134 0.1/16V
C133 0.1/16V
C160 0.1/16V
C159 0.1/16V
AVDD_33 VDDC_18
AVDD_33
AVDD_33
AVDD_33
D
+
C156 0.1/16V
C150
22u/16V
C154 0.1/16V
60Ω
C155 0.1/16V
FB102
RL111
RL112
RL113
0/NC
0/NC
0/NC
RL114
0/NC
R0603
LPIN6
LPIN5
GND
3
GND
R170
100/NC
VLCD
C
CON--PI-AL230C
R0603
PLUS-MINUS
Note4
Note 3
MENU
1
2
3
4
5
6
7
8
KEY1
ADC_KEY1
ADC_KEY2
LED_B
LED_A
RIGHT/LEFT
AUTO
E-color
LED_A
RXO1RXO1+
LED_G
KEY2
0/NC
RXO2RXO2+
RXOCRXOC+
RXO3RXO3+
+3.3V
GND
R138
4K7
R137
4K7
C140
0.1/16V
U106
SCL_OSD
SDA_OSD
WP_OSD
R142
100
R143
100
8
7
6
5
VCC
WP
SCL
SDA
A0
A1
A2
GND
1
2
3
4
VLCD
AT24C16AN
CN107
FFC-CON/NC
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
RXO0RXO0+
R194
C173 0.1/16V
C172 0.1/16V
C171 0.1/16V
0/NC
R193
C170 0.1/16V
EP103 5P35V/NC
C169 0.1/16V
EP102 5P35V/NC
C168 0.1/16V
To Keypad
Board
EP101 5P35V/NC
LED_G
POWER
C167 0.1/16V
CON--CLX-CI0108P1VDL-1
B
CN105
FFC-CON/NC
Define for X203H
CN104
2x4P 2.0mm
GND
RXO0RXO0+
RXO1RXO1+
RXO2RXO2+
RXOCRXOC+
RXO3RXO3+
RXE0RXE0+
RXE1RXE1+
RXE2RXE2+
RXECRXEC+
RXE3RXE3+
LPIN6
LPIN5
GND
GND
CON--PI-AL230C
3
B
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
VLCD
CON--HR-200PHD2X15ST
FOR SINGLE LVDS INPUT
A
A
Note:
1. Each bypass capacitor (0.1u/16V) must be respectively closed to pin that is DC power input of scaler IC.
2. LED blue driving circuit is reserved for BenQ model.
3. Bypass capacitor C167,C168,C169,C170,C171,C172,C173 are for ESD and EMI issue. ESD component
EP101,EP102,EP103 are for GPIO direct driving LED. Reserved R193&R194 for Dell 18.5W
4. CN104 is no locked packgae for normal model.CN104 is locked packgae for special model(Dell).
5. RL111,RL112,RL113,RL114 are reserved for some panel spec.
6. CN103 is no locked packgae for normal model.CN103 is locked packgae for special model(Dell).
SIZE :
COMMON
APPRO BY :
Custom
TITLE :
CHECK BY :
SCALER
2008-1-30
DATE :
SHEET
5
MSTAR_TSUM5PEHJ
InnoLux
Document Number :
4
3
2
6
OF
6
DRAWN BY :
Rev :
1
V01
5
4
3
2
1
D
D
5V_USB
+ C302
10u/25V
1
C303
2
0.1/16V
0.1/16V
VOUT
0
3
4
R316
L301
DP0
DM0
R320
2
NC/20mH
1
2
DP
DM
EP302
Delete R315;R317
for Acer X233H
Date: 08/09/01
Tomxiao
0
0
EP301
NC/R315
NC/R317
Q302
PMBT3904
0
D1M
L302
CN303
NC/20mH
D1P
2
DD1P
1
C324
10K
VBUSPWR
0
4
C325 0.1/16V
DD1M
3
R325
+
1
R313
PWR1
220u/10V
OVRP1#
10K
ESD
FB303
120Ω 3A
R327
1
2
3
4
EP303
EP304
5V_US B
R311
ESD
1
2
3
4
5
6
7
8
22K
VIN
1
4K7
6
+5V_U SB
CN301
8P 2.0mm 90°
R326
3.3V_USB
U301
LD1117AL-3.3V
3
C305
DP
DM
VBUSPWR
C304
3
4
3
2
1
R301
AP2305G N
3
3
1
4
2
5
+ C301
100u/16 V
2
ADJ
Q301
0.1/16V
+5V_U SB
CN302
UC11123-LK 1
0
VCC1
DD1DD1+
GND1
C
ESD
ESD
C
R329
0
3.3V_USB
PWR2_USB
D2M
D2P
GND
L303
NC/20mH
5
6
7
8
VCC2
DD2DD2+
GND2
EP305
EP306
2
0
VBUSPWR
FB305
120Ω 3A
NC/0
D1P0
D1M0
L306
NC/EP311
NC/EP312
NC/0
ESD
R338
2
1
DD1M
ESD
NC/20mH
37
LED4
DM4
34
DD3M
4
LED3
VDD25
33
VDD25OUT
5
LED2
DP3
32
DD4P
6
LED1
DM3
31
DD4M
7
GREEN
VDD33
30
AVDD33
8
AMBER
DP2
29
DD2P
9
VDD33
DM2
28
DD2M
10
X1
VSS
27
X2
11
X2
DP1
26
DD1P
DM1
25
DD1M
C312
0.1/16V
C310
C311
0.1/16V
0.1/16V
60Ω FB301
AVDD
AVSS
C314
C315
0.1/16V
4.7u/10V
VDD25OUT
C313
C316
0.1/16V
4.7u/10V
60Ω FB302
VDD25OUT
B
C317
+
C318
C319
C320
0.1/16V
0.1/16V
0.1/16V
24
VDD25
22u/16 V
VDD25OUT
VSS
0.1/16V
AVSS
2K43 1%
23
DPU
22
DP0
DMU
21
ADD33
20
AVDD33
DM0
AVDD
19
AVDD
AVSS
AVDD
C322
10p/50V
AVSS(R)
VDD25
18
12
C309
DD3P
X1
17
0
HTQFP48
R324
4
R337
DD1P
38
39
3
PWR1_CAMER A
NC/0
3
R336
SYSRSTB
40
41
42
43
44
45
35
C323
0.1/16V
PWR1
PPB4
CSB4
PPB3
CSB3
VSS
PPB2
PPB1
DP4
16
R322
0/NC
CSB2
VSSREG
3.3V_USB
ESD
ESD
46
2
30.000M Hz
C321
10p/50 V
47
48
VDD25OUT
CSB1
VSSREG
RREF
6
EP309
EP310
1
2
0
X301
VBUSM
36
UB111234 K5
DD4P
VDD33REG
VSS
NEC-uPD720114
C308
4.7u/10V
VSSREG
VDD25OUT
AVDD33
R323
C307
1u/16V
1
TEST
NC/20mH
CN305
R321
3
4
PWR4_USB
D4M
D4P
GND
L305
0/NC
0
5
R334
AVDD33
VDD25OUT
BUS_B
R318
0
R319
3.3V_USB
ESD
ESD
0
R335
3.3V_USB
3.3V_USB
15
UB11123 4K5
1 2 3 4
B
0/NC
10K R314
6
0
R333
DD4M
R309
U302
CN304
EP307
EP308
1
PWR4
C328 0.1/16V
OVRP1#
0
OVRP1#
0
3
4
C327 0.1/16V
NC/20mH
1 2 3 4
PWR3
D3M
D3P
GND
L304
FB306
120Ω 3A
0/NC
R308
0
DD3P
R332
0
R307
R312
15K
5
R331
DD3M
0
R305
0
10K R310
C306
1u/16V
2
OVRP1#
R303
0/NC
R306
SHELL
ESD
ESD
R330
9
0/NC
R304
14
1
DD2P
R302
AVDD33
0
4
C326 0.1/16V
DD2M
R328
13
PWR2
3
FB304
120Ω 3A
OVRP1#
Note:change D1P0 to pin2
change D1M0 to pin3
Date:2008/09/01
CN306
PWR1_CAMER A
D1P0
D1M0
1
2
3
4
5
5P 2.0mm 90° /NC
To Camera Module.
A
A
X233H
InnoLux
Document Number :
APPRO BY :
SIZE :
A1
TITLE :
CHECK BY :
USB HUB
2008-09-01
DATE :
SHEET
5
4
3
2
1
OF
1
1
DRAWN BY :
Rev :
V01
4
change for FHD2102
ID from 90 degree to
180 degree
L_OUT-
LOUT+
14
L_OUT+
12
AR
AL_IN
9
AL
AL
10
AL
MUTE
VOL
GND
7
EO_R
SHUT
8
5
EO_L
VOL
6
3
Hp/Sp
AGND
4
1
GND
+5V
2
LOUT+
+5V
R705
Audio5V
MUTE_IC
10K
D
+5V
C718 0.1/16V
3
15K
R702
C706 1500p/50V
C705 1500p/50V
10K
AR
10K
AR
LOUT-
100p/50V
16
C702
ROUT+
LOUT-
11
R701
100p/50V
100p/50V
ROUT-
100p/50V
15
AR_IN
C703
C704
D
1
CN701
2*8P 2.54mm 180°Power Board
R_OUT+ 13
ROUT+
2
C701
R_OUT-
ROUT-
3
R706
5
15K
1
Q702
PMBT3904
LOUT_P
B
VOL
C715 0.47/16V
R708
R704
10K
10K
C716
1u/16V
3
PGNDL
PGNDR
22
4
-OUT_L
-OUT_R
21
5
PVDD
PVDD
20
6
MUTE
SHDN
19
VDD
GND
18
8
INL
INR
17
9
NC
NC
16
10
VDC
NC
15
11
Volume
VREF
14
NC
13
C724 0.1/16V
1u/16V
12
C723
PAM8603M
7
NC
U701
C
ROUT_P
C719
470p/50V
ROUT_N
+5V
R703
10K
C713 0.47/16V
AR_IN
C707
FB702
120Ω 3A
LOUT_N
470p/50V
LOUT-
10u/25V
AL_IN
23
FB703
120Ω 3A
ROUT_N
C712
C714
1u/16V
24
PGNDR
1u/16V
+5V
+OUT_R
PGNDL
C711
MUTE_IC
+OUT_L
2
Z3
Mark
LOUT+
ROUTC708
B
470p/50V
4.7u/10V
C710
1u/16V
10u/25V
C720
LOUT_N
1
AC OFF PoP noise
solution change C717
form 0.1u to 4.7u
C722
FB704
120Ω 3A
ROUT_P
C717
LOUT_P
Z2
Mark
FB701
120Ω 3A
C
+5V
Z1
Mark
2
R707
470p/50V
ROUT+
InnoLux
PAM8603M
Document Number :
AUDIO COMMON BOARD
A
SIZE :
B
APPRO BY :
A
TITLE :
CHECK BY :
Audio
2008-10-07
DATE :
SHEET
5
4
3
2
2
OF
2
DRAWN BY :
Rev :
V05
1
Acer
Acer –LCD-B243HL
7.0 Assembly and Disassembly
The tool of Assembly and disassembly : 1) Electrostatic gloves 2) Electric screwdriver: the length of screwdriver top is 6±0.5cm and 15±0.5cm ;
the diameter of screwdriver top is Φ5*H5mm
Sequence
Item
Photo
Procedures
S1
Place panel
1.Take panel out of box and place it
on the foam;
2.Tear open the PE bag and put it in
the designated carton;
3. Place panel on the foam like the
attached picture.
Remark: Do not touch the lamp cord
and place the surface of panel
downsides on the cushion.
S2
Assemble
Keypad Pad
and Bezel
Assemble the key board designated
location on the Bezel , like the
attached picture
S3
Assemble
front bezel
PN
Description
631102240320H LCP 24"M240HW01A
V6-00(A)(AUO)HF
PCBA,KEYPAD
791401500000R BOARD,LE9D0-612
ROHS
1.Put the bezel on the form,withing it's
key board is on the right hands.
ASSY,BEZEL,FRON
2.Put the panel with two hands and
714030030100R T,B,PRINTING,LE24
put into the bezel carefully , without
Q1
scratching the panel
46
Acer
Acer –LCD-B243HL
Assembly and Disassembly (continue)
S4
Assemble
chassis and
PI board
S5
Insert FFC
cable into
mainboard
and Connect
USB board
mainboard
and power
board
S6
Fix USB
board
mainboard
and power
board
Insert IPC
electric foam on
the chassis like
the attached
1.Place the chassis on the cushion
ASSY,CHASSIS,B,A
after check, like the attached picture.
UO THIN
701000018213R
2.Insert power board into the
LED,W /DVI+VGA+U
designated location of chassis,like the
S
attached picture.
connect usb 1. Take FFC cable & main board,
boad and
check the board if OK;
P/I bord
2. Insert FFC cables into designated
FFC
location ;
3.connect USB board ,I/Fboard P/I
board and like the picture location
4.Check the FFC cable if OK
2
1
4
7
HRN LVDS FFC
430303002440H 30P 166.5MM
W /ALUMINUM FO
3
5
Fix USB board mainboard and power
PCBA,USB
792680300000H
BOARD,LE24Q2
board like the picture.
6
47
Acer
Acer –LCD-B243HL
Assembly and Disassembly (continue)
S7
Twist
hexagonal
screws
4
3
2
1
1. Handle hexagonal screws and
electric opener;
2. Twist screw in the interface as
attached picture;
3. Place cushion on the designated
location after iron frame is taken away.
S8
Fix chassis
fix chassis into bezel hook as
attached picture.
S9
Insert
FFCcable
1. Insert FFC cable into desiganted
connector and use jig to insert it;;
2. Tear off foil to stick the cable for fix.
Insert lamp
wire
Insert 4pcs lamp wire into the relevant
position and make sure the red one is
on the left and the blue is on the right
as attached picture.
S10
48
ASSY,CHASSIS,B,A
UO THIN
701000018213R
LED,W /DVI+VGA+U
S
Acer
Acer –LCD-B243HL
1.insert the speaker cable into the PIN
location of chassis like the attached
picture
2.be sure the red cable is on the left
and the green one is on the right.
3.be sure the cable is outside of the
speaker.
S11
Assemble
the speaker
S12
Insert
keypad
cable
Insert keypad cable into designated
location as attached picture.
HRN ASSY 2x4P to
430300802940H 8P 275m m
UL3302#28 Con
S13
Assemble
back cover
Buckle back cover according to the
sequence as attached picture and
check if the cover is fixed properly.
BACK
COVER,B,AUO THIN
501020236213R
LED,W /DVI+VGA+U
SB,
S14
Fix stand
1.Place stand on the location ,tear
open the PE bag ,check if ok and take
501260214700R STAND,B,,LE24Q1
4pcs screws to lock the stand as
attched picture
S15
Packing
Release monitor the packing like and
pack it like attached picture
49