Download Alpine KCE-250BT Owner`s manual

FOR CAR USE ONLY/NUR FOR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USC EN
AUTOMOVILES/SOLO PER L'UTILlZlO IN AUTOMOBILE/ENDAST FOR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/TOnbKO
AllA Hcnonb30BAHHA B ABTOM06HnAX/DO uiYCIA lYLKO W SAMOCHODZIE/riA XPHIH MONO IE AYTOKINHTO/
~=t!f!wm
BLUETOOTHINTERFACE
KCE-250BT
• GEBRUIKERSHANDLEIDING
• OWNER'S MANUAL
Please read before using this equipment.
Lees deze aanwijzingen aandachtig alvorens dit
toestel te gebruiken.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerates.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACION
Lealo antes de utilizar este equipo.
• PYKKOBOOBO,IJ,CfBO no 3KCnnYATAIJ;1111
npOQqTRTeTRTe HaCTOSl~ee PYKOBOKOBO~CTBO
nepe~ HaQaJIOM I1CnOJIh30BaHRSI o6opy~oBaHHSI.
• INSTRUKCJA OBSLUGI
Prosimy zapoznac si y z t'l instrukcj'l przed
przyst'lpieniem do uzytkowania urz,!dzenia.
•
ErXEIPI~I 0
XPHITH
IlaQaxaAoufl£ ('iLa~ao'tE 'to JtQLV XQ1')OLIlOJtOLijoE'tE 't1')
• ISTRUZIONI PER L'USO
Si prega di leggere prima di utilizzare i1
attrezzatura.
o'Uox£'UlJ·
• ffi P -3'- fffi
.~@ffi~m~2M~~~ffip~fffi·
• ANVANDARHANDLEDNING
Innan du anvander utrustningen bor du Hisa
igenom denna anvandarhandledning.
oBluetooth@
ALPINE ELECTllONICS MARKETING. INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITAlIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sui Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
ALPINE ELECTllONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-l (1-800-257-4631)
Wilhelm-Wagenfeld-Str. 1-3,80807 MOnchen.
Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPANA. SA
Portal de Gamarra 36, Pabellon, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ElECTRONICS OF CANADA, INC.
777 Supertesf Road, Toronto,
Onfario M3J 2M9, Canada
Phone 1-800-ALPINE-l (1-800-257-4631)
ALPINE ElECTllONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ElECTllONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-1315
ALPINE ELECTRONICS FRANCE S.A.R.l.
(RCS PONTOISE B 338101 280)
98, Rue de la Belle Etoile, Z.1. Paris Nord II,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
SUZHOU CRESTEC PRINTING CO., LTO.
596-598 Chang Jiang Road, Suzhou, Jiangsu, P.R.China
Printed in China (V)
68-16909Z21-A
I
I
I
I
I
I
I
I
I
I
I
ENGLISH
Contents
Operating Instructions
Audio Switching Operation
8
Call History
8
Redialing a Number in Dialed Calls
~ WARNING
History
WARNING
2
CAUTION
2
8
Dialing a Number in Received Calls
History
8
Dialing a Number in Missed Calls History
Setup Before Using
Dialing a Number In the Phone Book
About BLUETOOTH
3
Before Using Hands-Free Function
3
How to connect to a BLUETOOTH compatible
device (Pairing)
8
(Phone Book)
9
Dialing a Number Using Direct Dial Input
(AV Head Unit Only)
3
9
Voice Dial Operation
9
Dialing a Number from a CD Head Unit!
BLUETOOTH SETUP
BLUETOOTH Setup Operation
Setting the BLUETOOTH Device
Digital Media Receiver
9
4
4
Accessories
5
Installation
10
Registering the BLUETOOTH Device (AV
Head Unit only)
Deleting a BLUETOOTH Device from the
list
5
Velcro fastener Mounting
10
Mounting the Microphone
10
Displaying the phone service provider
name
5
Setting the Search Mode
5
Answering Calls Automatically
5
Selecting the output speaker
5
Adjusting the volume for the microphone
input
Connections
Connecting the BLUETOOTH INTERFACE to a
compatible Alpine Unit
Specifications
11
13
6
Displaying the firmware version
6
Updating the firmware
6
LIMITED WARRANTy
WARRANTY·EN
Hands-Free Phone Control
About the Hands-Free Phone
7
Answering a Call
7
Hanging up the Telephone
7
• Setting items, operations, etc., may be modified or removed
without notice depending on the connected Alpine
BLUETOOTH compatible unit.
• BT Audio source is not available with KCE-250BT.
Adjusting the volume during an active
phone call
Redial Function
7
8
I.EN
I
Operating Instructions
WARNING
&
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowcd,
consult a physician immediately.
USE ONLY IN CARS WITH A12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
Illay result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel. shift lever. brake
pedals, etc. can be extremely hazardous.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
2.EN
& CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY ASHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire's insulation from
being cut by the metal edge of the hole.
Setup Before Using
*
Depending on the head unit, the "BLUETOOTH IN (BT
IN) setting" may differ.
Refer to the follwing head unit types:
Type 1 <"Adapter" is displayed as a selection>
About BLUETOOTH
Adapter (ADPT):
This option allows the head unit to recognize
connection with this adapter. (Hands-free
Phone is available, and the 8T Audio source
can be displayed, but cannot be used.)
Off:
This option does not allow the head unit to
recognize connection with this adapter.
BLUETOOTH is a wireless technology allowing
communication between a mobile device or personal
computer over short distances. This enables a hands-free call
or data transmission between BLUETOOTH compatible
devices. BLUETOOTH transmission is available in the
unlicensed 2.4 GHz spectrum if the distance between devices
is within 10 meters. For details, refer to the BLUETOOTH
Homepage (http://www.bluetooth.com/).
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with
this adapter.
• Proper function of this adapter with all BLUETOOTH
compatible devices is not guaranteed. For handling of the
BT compatible device, consult your ALPINE dealer or
ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless
connection may be unstable.
• When you place a call, or perform setup operations, be
sure to stop your car in a safe place.
• For details on the control (selection, enter, cancel) from the
connected unit, refer to the Owner's Manual of the
respective unit.
• Depending on the connected BLUETOOTH compatible
device(s), the function may differ. Also refer to the Owner's
Manual of the connected device(s).
Type 2 <"Adapter" is not displayed as a selection>
HFP:
This option allows the head unit to recognize
connection with this adapter. (Hands-free
Phone is available, but the 8T Audio source is
not displayed.)
HFP+Audio (+AUDIO):
8T Audio is not available with the adapter, so
please do not select this option.
Off:
This option does not allow the head unit to
recognize connection with this adapter.
How to connect to a BLUETOOTH
compatible device (Pairing)
Refer to the Owner's Manual of your BLUETOOTH
compatible device for details on its operation.
1
Set a BLUETOOTH connection from a
BLUETOOTH compatible device.
Before Using Hands-Free Function
2
The PIN code ("0000") is displayed on the
connected unit.
Before using the hands-free phone function, the following
settings need to be made.
• The PIN code i.l'fixed as "0000".
1
Be sure to set "INT MUTE" (in the setup
function of the connected CD Head Unit or
Digital Media Receiver) to OFF.
• To enable sound pass-through of the BLUETOOTH
compatible device, make sure that INT MUTE is turned
OFF (Initial setting on the unit is OFF).
2
Set "BLUETOOTH IN" (BT IN) to Adapter
(ADPT) or HFP*. (Refer to the Owner's Manual
of the connected units.)
3
Turn the ignition key off (ACC OFF) and on
again (ACC ON).
Before using a hands-free phone, it must be paired with the
adapter. Refer to "BLUETOOTH SETUP" (pages 4-6).
• If "BLUETOOTH IN" (BT IN) setting is turned OFF at
any time, adapter communication is canceled. To resume
communication: repeat Steps I through 3 above.
3
Input the PIN code ("0000") in a BLUETOOTH
compatible device.
4
If the connected unit is successfully paired to
a BLUETOOTH compatible device, a paired
device name is displayed on the unit, and
then the unit returns to normal mode.
• If a BLUETOOTH compatible device is successfully paired.
the next time the vehicle '.I' ignition is turned on. pairing is
done automatically. Should the automatic pairing fail.
repeat the steps above.
• Set" Setting the Search Mode" (page 5) to ON to enable
the KCE-250BT to be recognized by a mobile phone. For
mobile phone passkey (passcode) input operation, refer to
the mobile '.I' Owner's Manual. Additionally, the mobile
phone can be searched directly from an AV Head Unit.
Refer to "Registering the BLUETOOTH Device (AV Head
Unit only)" (page 5).
3.EN
I
BLUETOOTH SETUP
~ttlng theBLUETOOTH
Device
Select one of 5 connected BLUETOOTH compatible devices
that you previously registered.
• The explanations in this Owner's Manual mainly describe
the following operations from the AV Head Unit.
Setting item: Paired Devices
BLUETOOTH Setup Operation
Touch a BLUETOOTH compatible device to use
(change connection) from the Paired Device list.
The following steps I to 5 are common to the various
BLUETOOTH functions. For details, refer to each individual
function.
• When placing or receiving a call from the BLUETOOTH
device, BLUETOOTH Setup operation cannot be
performed.
• Refer to the Owner's Manual of the CD Head Unit, AV
Head Unit or Digital Media Receiver, and set
"BLUETOOTH IN" (BT IN) to Adapter (ADPT) or HFP,
and then perform BLUETOOTH SETUP operation.
1
Touch [SETUP] or ["JJ ] on the main source
screen.
The SETUP selection screen is displayed
2
Touch the title bar of Source Setup.
The SOURCE SETUP screen is displayed.
3
Touch the title bar of BLUETOOTH Setup.
The BLUETOOTH setup is displayed.
4
Touch [ .... ], [~ ] or the title bar of the desired
item to change its setting.
Setting items:
Paired Devices / Device Search / Clear Device / Service
Provider / Visible Mode / Auto Answer / Speaker Select /
MIC Input / Firmware Version / Firmware Update
5
Touch [RETURN] or [~] to return to the
previous screen.
Controlling from a CD Head Unit I Digital Media
Receiver:
1 Press and hold SETUP for at least 2 seconds.
2 Turn the Rotary encoder or the Double Action
encoder to select the desired setting items and
press ENT.
Setting items:
PAIR DEVICE H VISIBLE MODE H AUTO ANSWER
CLEAR DEVICE H SERVICE NAME H MIC
INPUT H SPEAKER SELECT H FW VERSION H
FWUPDATE
H
•
Depending on the connected unit, some setting items
may not be displayed.
3 Turn the Rotary encoder or the Double Action
encoder to change the settings and press ENT.
4 Press and hold ESC (or SETUP) or ~ for at
least 2 seconds.
The SETUP mode is canceled.
4.EN
• If the connection is successfully changed, "Connected!
(Device name)" is displayed for 2 seconds, and then the
display returns to the Setup screen.
• If you input the wrong passcode or communications fail,
"Failed" is displayed.
• When a mobile phone is paired with the unit, up to 1,000
telephone numbers will automatically be obtained in the
telephone book (PHONE BOOK). Also, when the mobile
phone is reconnected, new information on the mobile
phone will automatically be updated.
• Depending on the connected mobile phone, the telephone
book (PHONE BOOK) may not be automatically obtained.
If the telephone book cannot be automatical!.)! obtained, it
can be manually transferred to the adapter by referring to
the Owner's Manual of the mobile phone.
• If you want to connect another BLUETOOTH compatible
device, after disconnecting the current BLUETOOTH
compatible device, connect the BLUETOOTH compatible
device you want to change to.
• The registration number 5 is deleted when you set ignition
from ACC to OFF. If all the 5 positions have been
registered, you cannot register the 6th device. To register
another device, you need to delete one of the devices from
position 1 to 5 first.
Controlling from a CD Head Unit I Digital Media
Receiver:
Turn the Rotary encoder or the Double Action
encoder to select a BLUETOOTH compatible
device you want to use (you want to change
connection), and then press ENT.
Setting item: Service Provider
When a BLUETOOTH compatible device is searched or
registered, it appears in the BLUETOOTH Device listing.
Setting item: Device Search
The service provider name of the connected BLUETOOTH
compatible device will be displayed. If a BLUETOOTH
compatible device is not connected, "ID UNSENT' will be
displayed.
Depending on the character type some phone service
provider names cannot be displayed.
o
1
When Device Search is selected, "Now
Searching" is displayed, and searching
starts.
2
Touch the device name to be paired from the
Device Search list.
You can set whether the KCE-250BT can be recognized or
not from a BLUETOOTH compatible device. Normally set
this to ON.
3
If the adapter is successfUlly paired to a
BLUETOOTH compatible device, a device
name and a registered number (No.1 to 5) are
displayed, and then the unit returns to normal
mode.
Setting item: Visible Mode
o
o
o
o
If a mobile phone is registered for the first time:
Input a passcode when the numeric keypad screen is
displayed, then input the same passcode in the
BLUETOOTH compatible device to make the pairing. After
the pairing is completed, the unit will automatically
connect to the BLUETOOTH compatible device.
If you input the wrong passcode or communications fail,
"Failed" is displayed.
A passcode input on a AV Head Unit is maximum 4-digit. If
a passcode on the BLUETOOTH compatible device
exceeds 4 digits, reset the passcode and make this setting
again.
When a device is connected at the moment, if you select
another device from the Device Search list to make
connection, the connection will fail and the selected device
will not be added into the Pair Devices list.
ON:
OFF:
tAnsweril'i'g•• OSlls.'.AotomatlcallY
When a call is received, you can set whether to answer it
automatically or not.
Setting item: Auto Answer
ON:
OFF:
call will be answered automatically even though this
setting is set to OFF.
:,~lettnga'BLU~TOOTH Device from theUst
You can delete the history of a previously connected
BLUETOOTH compatible device.
1
2
o
o
Touch the BLUETOOTH compatible device
you want to delete from the Clear Device list.
seleCting tbe Qutput speaker
Select which speaker in the vehicle will output the audio from
the BLUETOOTH compatible device.
Setting item: Speaker Select
A message is displayed,
All:
F-L:
Touch [Yes] if you want to delete.
F-R:
Touching [No] will cancel the setting.
The registration number 5 is deleted once the ignition key
goes from ACC to OFF.
Controlling from a CD Head Unit I Digital Media
Receiver:
Turn the Rotary encoder or the Double Action
encoder to select the BLUETOOTH compatible
device to be deleted, and then press ENT
When a call is received, it is answered
automatically after about 5 seconds.
When a call is received, it will not be answered
automatically. If a message is displayed and
[\t] is touched when a call is received, you
can answer the call. (When a CD Head Unit /
Digital Media receiver is connected, press
../ or \.. to answer a call.)
If the received call setting on the mobile phone is on, the
o
Setting item: Clear Device
Enable recognition of the KCE-250BT from the
BLUETOOTH compatible device.
Disable recognition of the KCE-250BT from the
BLUETOOTH compatible device.
F-LR:
o
o
The sound is output from
The sound is output from
only.
The sound is output from
speaker only.
The sound is output from
right speaker.
all of speakers in car.
the front left speaker
the front right
the front left and front
The setting cannot be adjusted during a phone call. Adjust
the setting before placing a call.
When an IMPRINT audio processor (PXA-H100) or
External Audio processor (PXA-H701, etc.) is connected,
the default setting All will be set and cannot be adjusted.
5.EN
I
Adjusting the volume for the microphone input
You can raise or lower the microphone input volume level.
Setting item: Mic Input
Touch [ .... ] or [~ ] to select the desired volume
level (0-7). (When a CD Head Unit/Digital Media
Receiver is connected, turn the Rotary encoder
or Double Action encoder to select the
volume level.)
• The setting can he adjusted only when the BLUETOOTH
compatihle del'ice is connected.
• The setting cannot be adjusted during a phone call. Adjust
the setting before placing a call.
Displaying the firmware version
Setting item: Firmware Version
Thc current firmware version will be displayed.
• When rhe BLUETOOTH firmware I'ersion is abol'e 2SS,
l't!rsion information may nor be correctly displayed. For
details, please refer to Alpine home page.
Updating the firmware
Setting item: Firmware Update
With this setting, the BLUETOOTH firmware update function
can he activated.
For European users:
Future BLUETOOTH firmware update (for phone
compatibility) at customer end will be available for
Alpine products listed at (*')
For information to update your BLUETOOTH firmware,
please visit your local Alpine web site or choose your
country from Alpine Europe top page (http!/
www.alpine-europe.com). For the products, which are
NOT listed at (*'), please contact your local official
Alpine dealer or Alpine support for your country.
*': Example for unirs that can be updated: IVA-DSII RlRB,
iXA -W404R. iDA -XJ/J/JIIIJII RlJoSSI30SIJoJ/Jo II
30lRR, CDE-W20JRi, CDE-112RiIIIIRlIIIRMII02Ril
IOIRilOlRM
For American users:
Future BLUETOOTH firmware update (for phone
compatibility) at customer end will be available for
Alpine products listed at (*2)
For information to update your BLUETOOTH firmware,
please visit Alpine America home page (http://
www.alpine-usa.com).
For the products, which are NOT listed at (*2), please
contact your local official Alpine dealer or Alpine
support for your country.
*2: Example for units rhat can be updated: INA- W900,
IVA-NAV-Io, iXA-W404, iDA-XJoSS/JoSIJoJ, CDA-118MI
1/7IIOS, CDE-102
6.EN
For Asian users:
Future BLUETOOTH firmware update (for phone
compatibility) at customer end will be available for
Alpine products listed at (*3).
For information to update your BLUETOOTH firmware,
please visit Alpine Asia home page (http!/
www.alpine-asia.com).
For the products, which are NOT listed at (~), please
contact your local official Alpine dealer or Alpine
support for your country.
~: Examplefor units that can be updated: IVA-DSII E,
iXA-W404E, iDA-XJ05S1305IJ03. CDA-117El105E,
CDE-W203E, CDE-I02EIIOIEIIOIEM
Hands-Free Phone
Control
Answering aCall
Incoming calls are announced by the received call ring tone
and a displayed message (Caller name/PHONE No.).
Touch [\.].
The call starts.
About the Hands-Free Phone
o
Hands-free calls are possible when using a HSP (Head Set
Profile) and HFP (Hands-Free Profile) compatible mobile
phone with a ALPINE BLUETOOTH compatible CD Head
Unit, AV Head Unit or Digital Media Receiver.
o
o
o
o
o
o
o
Avoid performing a hands-free call in heavy traffic or on
narrow or winding streets.
Close the windows while calling to reduce background
noise.
If both calling parties are using hands-free devices, or the
call is made in a noisy location, difficulty hearing the other
person's voice is normal.
Depending on telephone line conditions or certain mobile
devices used, voices may sound unnatural.
When using a microphone, speak as directly as you can
into the microphone to pick up the best sound quality.
Certain mobile phone features are dependent on the
capabilities and settings ofyour service provider's
network. Additionally, certain features may not be
activated by your service provider, and/or the provider's
network settings may limit the feature's functionality.
Always contact your service provider about feature
availability and functionality.
All features, functionality, and other product specifications,
as well as the information contained in the Owner's
Manual are based upon the latest available information
and are believed to be accurate at the time ofprinting.
Alpine reserves the right to change or modify any
information or specifications without notice or obligation.
• The explanations in this Owner's Manual mainly describe
the following operations from the AV Head Unit.
o
Indicator'i.,1I1 (Signal Strength):
While calling, the indicator will display the current signal
strength of mobile phone. While in the mode other than
Calling, the unit cannot read the signal strength of the
mobile phone exactly. In this case, the indicator displays
the signal strength of last call.
When "Answering Calls Automatically" (page 5) is set to
ON, you can receive a call automatically.
While calling, the source sound on the unit is muted. After
calling, playback will resume.
CD Head Unit / Digital Media Receiver:
Press .J or \... .
Hanging up the Telephone
Touch [ " . ].
The call finishes.
CD Head Unit / Digital Media Receiver:
Press .J or \... .
Adjusting the volume during an
active phone call
While calling, you can adjust the volume. The adjusted
volume level is stored.
Press v 1/\ or turn the Rotary encoder to
adjust the volume.
CD Head Unit / Digital Media Receiver:
Turn the Rotary encoder or the Double Action
encoder to adjust the volume.
o
You may need to increase volume from your regular audio
listening source level. However, increasing the volume
excessively may result in feedback. Iffeedback is noticed as
feedback is directly related to the \'olume, turn down the
volume as low as acceptable to eliminate it. Positioning the
microphone in a direction away from the main car speakers
(e.g. clipped on sun visor) may also reduce feedback at
high volume.
7-EN
I
Redial Function
You can redial the person you have previously called.
After finishing a call, touch [\. ]*' on the screen
within 5 seconds.
Redialing a Number in Dialed Calls History
Previously dialed telephone numbers are stored in dialed calls
history. You can redial a number by searching from dialed
calls history.
Setting item: Dialed Calls
The telephone is redialed.
*' CD Head Unit/Digital Media Receiver: Press ./ or '-..
Touch [Call] of the person name or the
telephone number you want to call from the
Dialed Calls list.
Audio Switching Operation
The call is placed.
While making a call, this function allows you to initiate the
transfer of the audio between the mobile phone and the
speakers in the car.
While calling, touch [~»)) .. \.]~ to switch the call
sound between the unit and mobile phone.
*2
CD Head Unit/Digital Media Receiver: Press and hold
ENT for at least 2 seconds.
• Depending on the mobile phone and the connected unit.
this operation may not be performed.
Dialing a Number in Received Calls History
Telephone numbers from received calls are stored in the
received calls history. You can redial these numbers by
searching here.
Setting item: Received Calls
Touch [Call] of the person name or the
telephone number you want to call from the
Received Calls list.
The call is placed.
Call History
Dialing a Number in Missed Calls History
Call History is recorded for the last dialed/received/missed
calls. There are various ways of making calls based on the
"Call History." The following steps 1 to 4 are common to the
various ways of making these calls. For details, refer to each
individual category for making calls.
1
Press SOURCElQ).
The SOURCE selection screen is displayed.
2
Touch [Phone] or [\. ].
The Telephone Menu screen is displayed.
3
Touch the title bar of the desired item to
place the call.
Setting items:
Dialed Calls / Received Calls / Missed Calls / Phone
Book / Dial Input / Voice Dial
• The adapter will update the information in the Call History
automatically each time a mobile phone is connected or
receiving/dialing a call. At this time. if you select any
outgoing mode. "Now Updating" will be displayed.
• It may take some time for the list to be displayed. and also
directly after connection, the list may not be brought up to
date.
4
Touch
[~] to
return to the previous screen.
Touch [Exit) to return to the main source screen that
was displayed before the setup operation was
started.
• If you place a call directly from the paired mobile phone.
the phone number is not displayed. you cannot redial from
the unit in this case.
8.EN
Telephone numbers for received calls that are missed, are
stored in the missed calls history. You can redial these
numbers by searching here.
Setting item: Missed Calls
Touch [Call] of the person name or the
telephone number you want to call from the
Missed Calls list.
The call is placed.
You can call the telephone by performing voice operation.
Up to 1,000 telephone numbers are downloadable to the
BLUETO<JfH compatible unit from a mobile phone. Dial a
call by selecting a person from the phone book list.
Setting item: Voice Dial
1
Touch the title bar of Voice Dial.
A message is displayed.
Setting item: Phone Book
Touch [Call] of the person name or the
telephone number you want to call from the
Phone Book list.
2
Touch [Yes] to activate the voice dial mode.
The voice dial mode is activated, and "Speak" is
displayed.
The call is placed.
• Touch [No] will return to the Telephone Menu screen.
• If one name has several numbers registered in the
3
telephone book, choose and touch [Call] of the desired
number after touching the name, the telephone will be
called. Touch [Call] of the name directly, the default
number of the name will be called. Not all mobile phones
support this jUnction.
• The names in Phone Book are listed alphabetically. The
listing can be skipped to the next alphabetical character.
e.g. touch ALPHABET [~ ] to move to the names
beginning with B from those beginning with A. (Only
applicable to English alphabetic characters.)
• If a name cannot be obtained via the phone book, only the
telephone number (default number) is displayed. If both
name and number cannot be obtained, "ID UNSENT" will
be displayed.
• If the call history or phonebook of the mobile phone is
added or deleted while it is connected to the unit, the list
displayed on the unit may not be brought up to date. Ifit is
not updated, you cannot correctly place a call.
ii:)laling a N.umber Using Direct Dial
(~V HeadUnltO"iYf· '.
. ..
In .
You can place a call by inputting the telephone number
directly by the numeric keypad screen on the AV Head Unit.
*
Say the telephone number*, name* you want
to call into the microphone.
The number and name depend on the voice dial
information stored in the mobile phone.
• If the voice dial fails, the unit will return to normal mode in
30 seconds.
• You can perform this operation only when a voice dial
compatible mobile phone is connected. If the mobile phone
is not compatible with the voice dial, "Failed" is displayed
for 2 seconds.
• The Voice Dial function performance depends on the
recognition range of the mobile phone and mounting
location of the microphone. Note when the microphone is
mounted.
• Voice dial operation depends on the function of the mobile
phone. For details, refer to the Owner's Manual of the
mobile phone.
CD Head Unit I Digital Media Receiver:
Press and hold \... or ,./ for at least 2 seconds
The speak mode is activated, and "SPEAK" is
displayed.
2 Say the telephone number, name you want to
call into the microphone.
Setting item: Dial Input
The numeric keypad screen is displayed. Touch
(input) the telephone number, and then touch
[Call].
The call is placed.
• About the numeric keypad
[X): closes the numeric keypad input screen.
[Delete All}: deletes all input numbers.
[ ... ]: deletes a previous number.
frq",a CD Head UnitlDigltal
1 Press [PHONE].
2 Turn the Rotary encoder or the Double Action
encoder to select the desired settings (DIALED /
RECEIVED / MISSED / PHONE BOOK), and
press ENT.
The list is displayed.
3 Turn the Rotary encoder or the Double Action
encoder to select the telephone number you
want to call, and then press ENT.
The call is placed.
9.EN
I
Accessories
Installation
Check accessory parts.
KCE·250BT Module
B
,
xl
Microphone
~
xl
BLUETOOTH Interface
Cable
xl
Velcro Fastener
~
Velcro lastener Mounting
Power Cable
~
xl
Microphone Mounting
Brackets
D
x2
br
For the sake of safety, follow the guidelines below in
choosing the mounting location.
•
Do not mount the adapter under your feet. Do not step on
the adapter, or apply excessive pressure on it.
Before mounting the adapter, leave enough space above
the unit to prevent possible malfunction due to radiated
data noise.
Depending on the adapter mounting location noise may
occur when using a BLUETOOTH compatible device.
This may cause interference resulting in errors in the
BLUETOOTH data being sent or received. Should this
happen, the BLUETOOTH device may have problems in
pairing or functioning normally. In this case, mount the
adapter in another location.
Attach one side of the Velcro fastener to the box.
Remove the backing from the other side of the Velcro
strip. Gently press the adapter onto its selected
mounting location.
xl
Velcro ~~%----4Lii>
fastener
Mounting the Microphone
For the sake of safety, mount the microphone in the following
location.
In a stable and secure location.
In a location that does not inhibit safely driving the
vehicle.
Mount the microphone in a location where the driver's
voice can easily be picked up.
Choose a location for the microphone that can easily pick up
the drivers voice. Requiring the driver to move towards the
mic for audibility causes a distraction that could be
dangerous.
Mount the microphone using the supplied Velcro
fastener or the bracket.
lO.EN
Connections
Connecting the BLUETOOTH INTERFACE to a compatible Alpine Unit
Before the operation, be sure to set "INT MUTE" and "AUX+" (in the setup function of the connected
head unit*) to OFF.
*
Head unit includes CD Head Unit, AV Head Unit and Digital Media Receiver:
• When the KCE-250BT is connected to a head unit, the [NT MUTE setting may not be possible, depending on the head unit.
• The AUX+ setting may not be possible. depending on the head unit.
• For details, refer to the Owner's Manual of the head unit.
Connections for the head unit with Full Speed connector I BLUETOOTH INTERFACE connector
Example for BLUETOOTH compatible unit:
INA-W900, IVA-NAV-10. IVA-D511 Series, iXA-W404 Series, iDA-X313/311/305/303/301 Series, CDA-118M/117/105 Series,
CDE-W203/112Ri/111/102/101 Series
• About information of BLUETOOTH compatible units other than the above mentioned. please contact your local official Alpine
dealer or visit Alpine home page.
BLUETOOTH
compatible Unit
(Sold separately)
r.:::=.-- - -
i
\
I
It--------lJI
t-----.::=:@~lHj
t----""?"'".;;;;:®~lllj
Fuse (7.5 A)
CD
®
To Full Speed connector I BLUETOOTH
INTERFACE connector
BLUETOOTH INTERFACE Cable (Included)
@ Microphone (Included)
@ Audio Interrupt Out lead (Pink/Black)
Be sure to connect only when power is turned off,
as a malfunction may result.
@) Audio Interrupt In lead (Pink/Black)
_~~
®
(If the BLUETOOTH INTERFACE is
connected, you cannot use a
device connected to the INT lead
(voice interruption, etc.).)
®
ACC (Ignition) lead (Red)
To the ACC Power lead.
(j) Battery lead (Yellow)
Connect this lead to a terminal that constantly
provides power (to the positive (+) post of the
battery).
@ Ground lead (Black)
Connect to a metal part of chassis body with screw.
II.EN
I
Connections for the head unit with iPod Direct Connector
BLUETOOTH compatible unit:
IVA-D106/D105 Series, IVA-W505/W502/W205/W202 Series, iDA-X300/X200/X100/X001 Series, CDA-988* Series, CDE-9882Ri,
CDE-9880R. CDE-9874/9872 Series
• The head units CDE-9872 and CDE-9872L purchased in the America are not BLUETOOTH compatible.
BLUETOOTH
compatible Unit
(Sold separately)
,
~----
!
I--M-,c-HE-AO-UN-,y- - - P - " , , - E R - i J j
-1,
i
' Ii
J
I
I
~
®
J'
@
t-
--..,_®;:;;;:6;".,qjjiiIDj
Fuse (7.5 A)
'---{!@J
®
(If the BLUETOOTH INTERFACE
is connected, you cannot use a
device connected to the INT
lead (voice interruption, etc.).)
®
CD
®
To iPod Direct Connector
Interconnection Cable (KWE-460E) (Sold
separately)
@ Microphone (Included)
@ Audio Interrupt Out lead (Pink/Black)
Be sure to connect only when power is turned off.
as a malfunction may result.
12.EN
®
®
Audio Interrupt In lead (Pink/Black)
ACC (Ignition) lead (Red)
To the ACC Power lead.
!J) Battery lead (Yellow)
Connect this lead to a terminal that constantly
provides power (to the positive (+) post of the battery).
@ Ground lead (Black)
Connect to a metal part of chassis body with screw.
Specifications
BLUETOOTH SECTION
BLUETOOTH Specification
BLUETOOTH V2.0
Output Power
+4 dBm Max. (Power class 2)
Profile
HFP (Hands-Free Profile)
HSP (Head Set Profile)
GENERAL
Power Requirement
Weight
CHASSIS SIZE
Width
Height
Depth
I
13.5V DC
(10-16 V allowable)
96 g
95 mm (3-3/4")
25 mm (1")
77 mm (3")
• The BLUETOOTlf® word mark and logos are registered
trademarks owned by the Bluetooth SIC, Inc. and any use
ofsuch marks by Alpine Electronics, Inc. is under license.
13.EN
~LPINE®
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality
craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any
questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.
• PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related
Accessories ("the product"). Products purchased in the
Canada are covered only in the Canada. Products
purchased in the U.S.A. are covered only in the U.S.A.
@ You must supply proof of your purchase of the product.
@ You must package the product securely to avoid
damage during shipment. To prevent lost packages it is
recommended to use a carrier that provides a tracking
service.
• LENGTH OF WARRANTY:
• HOW WE LIMIT IMPLIED WARRANTIES:
This Warranty is in effect for one year from the date of the
first consumer purchase.
This Warranty only covers the original purchaser of the
product, who must reside in the United States, Puerto Rico
or Canada.
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR
USE AND MERCHANTABILITY ARE LIMITED IN
DURATION TO THE PERIOD OF THE EXPRESS
WARRANTY SET FORTH ABOVE AND NO PERSON IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE OF THE
PRODUCT.
• WHAT IS COVERED:
• HOW WE EXCLUDE CERTAIN DAMAGES:
• WHO IS COVERED:
This Warranty covers defects in materials or workmanship
(parts and labor) in the product.
• WHAT IS NOT COVERED:
This Warranty does not cover the following:
Damage occurring during shipment of the product to
Alpine for repair (claims must be presented to the
carrier).
® Damage caused by accident or abuse, including burned
voice coils caused by over-driving the speaker (amplifier
level is turned up and driven into distortion or clipping).
Speaker mechanical failure (e.g. punctures, tears or
rips). Cracked or damaged LCD panels. Dropped or
damaged hard drives.
@ Damage caused by negligence, misuse, improper
operation or failure to follow instructions contained in the
Owner's manual.
@ Damage caused by act of God, including without
limitation, earthquake, fire, flood, storms or other acts of
nature.
Any cost or expense related to the removal or
reinstallation of the product.
® Service performed by an unauthorized person, company
or association.
® Any product which has the serial number defaced,
altered or removed.
(j) Any product which has been adjusted, altered or
modified without Alpine's consent.
@ Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
® Any product not purchased from an Authorized Alpine
Dealer.
CD
• HOW TO OBTAIN WARRANTY SERVICE:
CD
®
You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair
and for payment of any initial shipping charges. Alpine
will, at its option, repair or replace the product with a
new or reconditioned product without charge. If the
repairs are covered by the warranty, and if the product
was shipped to an Authorized Alpine Service Center or
Alpine, Alpine will pay the return shipping charges.
You should provide a detailed description of the
problem(s) for which service is required.
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES
CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL
DAMAGES" REFERS TO EXPENSES OF
TRANSPORTING THE PRODUCT TO THE ALPINE
SERVICE CENTER, LOSS OF THE ORIGINAL
PURCHASER'S TIME, LOSS OF THE USE OF THE
PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF
THE PRODUCT. THE TERM "CONSEQUENTIAL
DAMAGES" REFERS TO THE COST OF REPAIRING OR
REPLACING OTHER PROPERTY WHICH IS DAMAGED
WHEN THIS PRODUCT DOES NOT WORK PROPERLY.
THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
• HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may
also have other rights which vary from state to state and
province to province. In addition, some states/provinces do
not allow limitations on how long an implied warranty lasts,
and some do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not
apply to you.
.IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio
product has been installed in your vehicle by an Authorized
Installation Center, and this warranty stamped upon
installation by the installation center.
• HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO 1-S00-ALPINE-1 (1-S00-257-4631)
NAVIGATION 1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
WARRANTY·EN
~/iLPINE®
GARANTIE LlMITEE
Fideles a leur engagement de ne fournir que des produits de qualite, ALPINE ELECTRONIQUE DE L'AMERIQUE, INC. et
ALPINE ELECTRONIQUE DU CANADA, INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggerons de Ie
lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter I'un de nos concessionnaires ou appeler
directement Alpine aux numeros listes ci-dessous.
e PRODUITS COUVERTS PAR LA GARANTIE
@ Vous devez donner une description detaillee des
Cette garantie est en vigueur pendant un an a partir de la date
du premier achat du client.
problemes qui sont a I'origine de votre demande de
reparation.
@ Vous devez joindre la preuve de votre achat du produit.
@ Vous devez embailer soigneusement Ie produit pour eviter
tout dommage durant son transport. Pour eviter la perte
de I'envoi, il est conseille de choisir un transporteur qui
propose un service de suivi des envois.
e PERSONNES PROTEGEES PAR LA GARANTIE
• LIMITATION DES GARANTIES TACITES
Cette garantie couvre les produits audio de voiture et les
accessoires connexes (OOle produit OO ). Elle ne couvre les
produits que dans Ie pays ou ils ont ete achetes.
e DUREE DE LA GARANTIE
Seul I'acheteur original du produit, s'il resisde aux Etats-Unis,
a Porto Rico ou au Canada, peut se prevaloir de la garantie.
e CE QUI EST COUVERT
Cette garantie couvre tous les defauts de materiaux et de
fabrication (pieces et main d'reuvre) du produit.
eCE QUI N'EST PAS COUVERT
Cette garantie ne couvre pas ce qui suit:
Les dommages survenus durant Ie transport des produits
renvoyes a Alpine pour etre repares (Ies reclamations
doivent etre adressees au transporteur);
@ Les degats provoques par un accident ou une mauvaise
utilisation, y compris des bobines acoustiques grillees
suite a une surexcitation des enceintes (augmentation
du niveau de I'amplificateur jusqu'a atteindre un effet de
distorsion ou d'ecretage), une defaillance mecanique
des enceintes (perforations, dechirures ou fentes),
panneaux LCD fissures ou endommages, disques durs
endommages ou ayant subi une chute.
@ Tout degat provoque par negligence, usage inapproprie,
mauvaise utilisation ou par Ie non-respect des
instructions indiquees dans Ie manuel de I'utilisateur.
@ Les dommages dus a la force majeure, notamment aux
tremblements de terre, au feu, aux inondations, aux
tempetes ou aux autres cataclysmes naturels;
Les frais ou les depenses relatifs a I'enlevement ou a la
reinstallation du produit;
® Les services rendus par une personne, physique ou
morale non autorisee;
® Les produits dont Ie numero de serie a ete efface, modifie
ou retire;
CD Les produits qui ont ete adaptes ou modifies sans Ie
consentement d'Alpine;
® Les produits qui ne sont pas distribues par Alpine aux
Etats-Unis, a Porto Rico ou au Canada;
® Les produits qui n'ont pas ete achetes par I'entremise d'un
concessionnaire Alpine autorise;
CD
e COMMENT SE PREVALOIR DE LA GARANTIE
CD
II vous faut remellre Ie produit necessitant des reparations
a un centre de service autorise Alpine ou a Alpine meme et
en assumer les frais de transport. Alpine a Ie choix entre
reparer Ie produit ou Ie remplacer par un produit neuf ou
revise, Ie tout sans frais pour vous. Si les reparations sont
couvertes par la garantie et si Ie produit a €lte envoye a un
centre de service Alpine ou a Alpine, Ie paiement des frais
de reexpedition du produit incombe Alpine.
LA DUREE DE TOUTES LES GARANTIES TACITES, Y
COMPRIS LA GARANTIE D'ADAPTATION A L'UTILISATION
ET LA GARANTIE DE QUALITE LOYALE ET MARCHANDE,
EST L1MITEE ACELLE DE LA GARANTIE EXPRESSE
DETERMINEE CI-DESSUS. PERSONNE N'EST AUTORISE
AENGAGER AUTREMENT LA RESPONSABILITE D'ALPINE
EN VERTU DE LA VENTE D'UN PRODUIT.
e EXCLUSIONS DE LA GARANTIE
ALPINE STIPULE EXPRESSEMENT QU'ELLE N'EST PAS
RESPONSABLE DES DOMMAGES-INTERETS ET
DOMMAGES INDIRECTS PROVOQUES PAR LE PRODUIT.
LES DOMMAGES-INTERETS SONT LES FRAIS DE
TRANSPORT DU PRODUIT VERS UN CENTRE DE
SERVICE ALPINE, LA PERTE DE TEMPS DE L'ACHETEUR
ORIGINAL, LA PERTE D'UTILISATION DU PRODUIT, LES
BILLETS D'AUTOBUS, LA LOCATION DE VOITURES ET
TOUS LES AUTRES FRAIS LIES A LA GARDE DU
PRODUIT.
LES DOMMAGES INDIRECTS SONT LES FRAIS DE
REPARATION OU DE REMPLACEMENT D'AUTRES BIENS
ENDOMMAGES SUITE AU MAUVAIS FONCTIONNEMENT
DU PRODUIT.
LESRECOURS PREVUS PAR LES PRESENTES
EXCLUENT ET REMPLACENT TOUTE AUTRE FORME DE
RECOURS.
e LIEN ENTRE LA GARANTIE ET LA LOI
La garantie vous donne des droits specifiques, mais vous
pouvez aussi jouir d'autres droits, qui varient d'un etat ou
d'une province a I'autre. En outre, certains €ltats et certaines
provinces interdisent de limiter la duree des garanties tacites
ou d'exclure les dommages accessoires ou indirects. Dans ce
cas, les limites et les exclusions de la garantie peuvent ne pas
s'appliquer a vous.
e CLAUSE APPLICABLE AU CANADA SEULEMENT
Pour que la garantie soit valable, il faut qU'un centre
d'installation autorise ait installe Ie systeme audio pour I'auto
dans votre vehicule et qU'il ait ensuite appose son cachet sur
la garantie.
e NUMEROS D'APPEL DU SERVICE A LA CLIENTELE
Si vous avez besoin de nos services, veuillez appeler Alpine
aux numeros ci-dessous pour Ie centre de service autorise
Alpine Ie plus proche.
AUDIO DE VOITURE
NAVIGATION
1-80o-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
Ou visitez notre site Web a I'adresse hllp://www.alpine-usa.com
ALPINE ELECTRONIOUE DE L'AMERIOUE, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONIOUE DU CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
N'envoyez aucun produit aces adresses.
Appelez notre numero gratuit ou visitez notre site Web si vous recherchez un centre de service.
WARRANTY.FR
About the Rules of Bluetooth Electromagnetic Radiation Regulation 11J~~~Ir9~)~
)n~j!AE~*
Country 11iIli:
Rules of Electromagnetic Radiation Regulation / ~iEUHjtfE
USA/Canada
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of this device.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Europe
(E:
Declaration of Conformity
~.
1tWJ$~vUliiljfi'11~t!~J~WRr:t (930322)
•••
~+=fl~ R~rt~mftM~m~$H.~t!'#R~m'0~·
~m~~~mM~~~.$·
ro*~$.~~~m~~Mtt&~no
~+l1Efl~ m~$H.~t!~~m~m~.M.~~&~mft$am;RB~W~~~.M'.~~~
m'~&g~~~~MnmW~~mo
M~ft$am,m~~m$.~w.~~.~amo
m~$H.~t!~~~ft$am.I.·M.&g.m ~Htt.t!m.~~mo
••
Australia!
New Zealand
Declaration of Conformity
UAE
Approved by TRA
SINO. LABEL
MERCURY LABEL
To customers purchasing KCE·400BT/KCE·250BT/Fiir Kunden, die das KCE-400BT/KCE-250BT erworben haben/A I'attention des utilisateurs avant achete Ie
modele KCE·400BT/KCE·250BT/lnformacion para los clientes que hayan adquirido el modelo KCE·400BT/KCE·250BT/lnformazioni per i clienti KCE·400BT/
KCE·250BT/Till kunder som kiiper KCE·400BT/KCE·250BTNoor klanten met de KCE·400BT/KCE·250BT/,QIlR nOKynaTelleM MO,QelleM KCE-400BTI
KCE-250BT/Do klient6w kupujClcych modut KCE-400BT/KCE-250BTlnpoC; TOUC; neAim:c; nou ayopaaav TO IJOVT&AO KCE-400BTI
KCE-250BTli&.~ KCE·400BT/KCE·250BT ll'9~p/~~~ KCE·400BT/KCE-250BT tr-.J~p
English
Deutsch
Francais
Be sure to complete setting up of the head unit functions as follows":
Achten Sie darauf, die Einrichtung der Funktionen des Hauptgerats wie folgt
abzuschlieBen" :
Veillez a proceder a la configuration des fonctions de I'unite principale, en
suivant les etapes ci-dessous" :
INT MUTE-Einstellung: OFF
AUX+-Einstellung: OFF,2
BLUETOOTH IN (BT IN)-Einstellung: Adapter (ADPT), HFP oder HFP+Audio (+AUDIO),3
*1 Achten Sie darauf, nach der Einstellung die Zundung aus- und dann wieder einzuschalten.
*2 Abhangig yom Hauptgerat ist die Einstellung "AUX+" m6glicherweise nicht verfOgbar
Reglage INT MUTE: OFF
Reglage AUX+ : OFF,2
Reglage BLUETOOTH IN (BT IN): Adapter (ADPT), HFP ou HFP+Audio (+AUDIO),3
*1 Une fois les reglages termines, veillez a regler ACC sur OFF, puis a nouveau sur ON.
*2 Selon I'unite principale, il est possible que Ie reglage « AUX+ » ne soit pas disponible.
INT MUTE setting: OFF
AUX+ setting: OFF*2
BLUETOOTH IN (BT IN) setting: Adapter (ADPT), HFP or HFP+Audio (+AUDIO),3
*1 After setting, be sure to set ACe to OFF, then set to ON again.
*2 Depending on the head unit, "AUX+ setting" may not be available.
• For delails, refer to the Owner's manual of the head unit
'3 Depending on the head unit, the "BLUETOOTH IN (BT IN) setting" may differ.
Refer to the following head unit types:
Type 1<"Adapter" is displayed as a selection>
Adapter (ADPT): This option allows the head unit to recognize connection with this adapter. (Handsfree Phone is available, and the 8T Audio source is displayed.) In the case of KCE-250BT, the 8T Audio
source is displayed but cannot be used.
Off: This option does not allow the head unit to recognize connection with this adapter.
Type 2<"Adapter" is not displayed as a selection>
HFP: This option allows the head unit to recognize connection with this adapter. (Hands-free Phone is
available. but the BT Audio source is not displayed.)
HFP+Audio (+AUDIO): This option allows the head unit to recognize the connection with this adapter.
(Hands-free Phone is available. and the BT Audio source is displayed.) Do not select this when using
KCE-250Bl
Off: This option does not allow the head unit to recognize connection with this adapter.
• 8T Audio source is not available with KCE-250BT.
• About the availability of the 8T Audio source with KCE-4008T, refer to the Owner's manual of the
BLUETOOTH® compatible device.
Espafiol
• Weitere Informationen find en Sie in der Bedienungsanleitung des Hauptgerats.
Schlagen Sie unter den folgenden Hauptgerattypen nach
• Pour plus de details, reportez-vous au mode d'emploi de I'unite principale.
>< BLUETOOTH IN (BT IN) " differe.
Reportez-vous aux types d'unitE:!s principales suivants
Typ 1 <"Adapter" wird als Auswahl angezeigt>
Type 1 <<< Adapter» s'affiche comme selection>
Adapter (ADPT): Diese Option erm6glicht, dass das Hauptgerat die Verbindung mit diesem Adapter
erkennl. (Die Freisprecheinrichtung tOr das Telefon ist verfugbar und die Quelle BT Audio wird
angezeigt.) Beim KCE-250BT wird die Quelle BT Audio angezeigt, kann aber nicht verwendet werden.
Off: Diese Option erm6glicht nicht, dass das Hauptgerat die Verbindung mit diesem Adapter erkennt.
Adapter (ADPT) : cette option permet a I'unite principale de reconnaitre la connexion avec cet
adaptateur. (La fonction Telephone mains libres est disponible et la source BT Audio s'affiche.) Dans Ie
cas du modale KCE-250BT, la source 8T Audio s'affiche, mais il est impossible de l'utiliser.
Off : celie option ne permet pas a I'unite principale de reconnaitre la connexion avec cet adaptateur.
Typ 2 <"Adapter" wird nicht als Auswahl angezeig!>
Type 2 <<< Adapter» ne s'affiche pas comme selection>
HFP: Diese Option erm6glicht, dass das Hauptgerat die Verbindung mit diesem Adapter erkennt. (Die
Freisprecheinrichtung fOr das Teleton ist verfOgbar, aber die Quelle BT Audio wird nicht angezeigt.)
HFP+Audio (+AUDIO): Diese Option erm6glicht, dass das Hauptgerat die Verbindung mit diesem
Adapter erkennt. (Die Freisprecheinrichtung fOr das Telelon ist verfOgbar und die Quelle 8T Audio wird
angezelgt.) Wahlen Sie diese Option nicht beim KCE-250BT.
Off: Diese Option erm6ghcht nicht, dass das Hauptgerat die Verbindung mit diesem Adapter erkennt.
HFP : cette option permet a I'unite principale de reconnaitre la connexion avec cet adaptateur (Ia
fonction mains libres est disponible, mais la source 8T Audio n'est pas affichee).
HFP+Audio (+AUDIO) : cette option permet a I'unite principale de detecter la connexion a cet
adaptateur, (La fonction Telephone mains Iibres est disponible et la source BT Audio s'affiche,) Ne
selectionnez pas cette option lorsque vous utilisez Ie modele KCE-250BT.
Off : celte option ne permet pas a I'unite principale de reconnaitre la connexion avec cet adaptateur.
• Die Quelle BT Audio ist beim KCE-250BT nlcht verlOgbar.
• Informalionen zur VerfUgbarkeit der Quelle BT Audio beim KCE-400BT finden Sie in der
Bedienungsanleitung des mit BLUETOOTH@ kompatiblen Gerats.
• La source BT Audio n'est pas disponible avec Ie modele KCE-250BT.
• Pour savoir si la source BT Audio est disponible avec Ie modele KCE-400BT. reportez-vous au mode
d'emploi du peflpherique compatible BLUETOOTH@
'3 Abhangig vom Hauptgerat kann die Einstellung "BLUETOOTH IN (BT IN)" abweichen.
ItalUlnO
Es importante finalizar la configuraci6n de las funciones de la unidad principal Accertarsi di completare I'impostazione delle funzioni dell'unita principale nel
del modo siguiente":
modo seguente":
Ajuste INT MUTE: OFF
Ajuste AUX+: OFF,2
Ajuste BLUETOOTH IN (BT IN): Adapter (ADPT), HFP 0 HFP+Audio (+AUDIO),3
*1 Una vez ajustado. es importante establecer ACC en OFF y despues volverlo a ajustar en ON.
*2 Segun la unidad principal, es posible que el ajuste uAUX+" no esM disponible.
• Para obtener mas informaci6n, consulte el Manual del propietario de la unidad principal.
'3 Segun la unidad principal, el ajuste "BLUETOOTH IN (BT IN)" puede variar.
Consulte los siguientes tipos de unidad principal:
Tipo 1 <"Adapter" aparece como opci6n>
Adapter (ADPT): con esta opci6n, la unidad principal reconoce la conexi6n can este adaptador.
(Telefono manos libres disponible y fuente 8T Audio visible.) En caso del modelo KCE-2508T, la fuente
BT Audio esta visible pero no se puede usar.
Off: can esta opci6n, la unidad principal no puede reconocer la conexi6n can este adaptadar
Tipo 2 <"Adapter" no aparece como opci6n>
HFP: can esta opci6n, la unidad principal reconoce la conexi6n con este adaptador. (Eltelefono
manos Jibres esta disponible, pero la fuente 8T Audio no aparece.)
HFP+Audio (+AUDIO): esta opci6n permite que la unidad principal reconozca la conexi6n can este
adaptador. (Telefono manos libres disponible y fuente 8T Audio visible.) No seleccione esta opci6n si
utiliza el modelo KCE-250Bl
Off: can esta opci6n, la unidad principal no puede reconocer la conexi6n can este adaptador
• La fuente BT Audio no esta disponible en el modelo KCE-2508T.
• Para obtener informaci6n sobre la disponibilidad de la fuenle BT Audio can el modelo KCE-400BT,
consulte el Manual del propietario del dispositive compatible con BLUETOOTH®.
Impostazione INT MUTE: OFF
Impostazione AUX+: OFF*2
Impostazione BLUETOOTH IN (BT IN): Adapter (ADPT), HFP 0 HFP+Audio (+AUDIO),3
* 1 Dopo aver completato I'impostazione, accertarsi di impostare ACC su OFF, quindi impostarlo
nuovamente su ON.
*2 A seconda dell'unita principale, I"'impostazione AUX+ ~ potrebbe non essere disponibile.
• Per ulteriori informaziani, consultare Ie istruzioni per ruso dell'unita principale.
*3 A seconda dell'unita principale, I"'impostazione BLUETOOTH IN (8T IN)~ potrebbe essere diversa
Fare riferimento ai tipi seguenti di unita principale:
Tipo 1 <"Adapter" viene visualizzato come selezione>
Adapter (ADPT): questa opzione consente alrunita principale di riconoscere il collegamento can
questa adattatore, (La funzione vivavoce deltelefono a disponibile e la sorgente BT Audio viene
visualizzata). Nel casa di KCE-2508T, la sorgente 8T Audio viene visualizzata, rna non pub essere
utilizzata.
Off: questa opzione non consente all'unita principale di riconoscere iI collegamento can questa
adattatore.
Tipo 2 <"Adapter" non viene visualizzato come selezione>
HFP: questa opzione consente all'unita principale di riconoscere il coJlegamento can questa
adaltatore. (La funzione vivavoce del telefono a disponibile, rna la sorgente BT Audio non viene
visualizzata).
HFP+Audio (+AUDIO): questa opzione consente all'unita principale di riconoscere il collegamento can
questo adattatore, (La funzione vivavoce del telefono a disponibile e la sorgente 8T Audio viene
visualizzata). Non selezionare quando si utilizza KCE-250BT.
Off: questa opzione non consente all'unita principale di riconoscere il collegamento con questa
adattatore.
'3 Selon I'unile principale, II est possible que Ie reglage
Svenska
Se till att huvudenhetens funktioner stalls in pa foljande satt":
INT MUTE-installning: OFF
AUX+-insUilining: OFF*2
BLUETOOTH IN (BT IN)-installning: Adapter (ADPT), HFP eller HFP+Audlo (+AUDIO),3
*1 Etter installningen ska du kontrollera atl ACC ar OFF. Stall sedan in pa ON igen.
*2 Beroende pa huvudenhet kan det handa alt "AUX+-installningen" inte ar tillganglig.
• Ylterligare information Hnns i huvudenhetens bruksanvisning.
*3 Beroende pa huvudenheten kan det handa atl "BLUETOOTH IN (BT IN)-installningen" varierar.
Relerera till f61jande typer av huvudenheter:
Typ 1 <"Adapter" visas sam val>
Adapter (ADPT): Med della alternativ kan huvudenheten identifiera anslutningen med denna adapter.
(Hands!reetele!on ar ltllganglig och BT Audio-kalla visas). For KCE-250BT visas BT Audio-kallan, men
den kan inte anvandas
Off: Med detta alternativ kan inte huvudenheten identifiera anslutningen med denna adapter.
Typ 2 <"Adapter" visas inte sam val>
HFP: Med deUa alternativ kan huvudenheten identifiera anslutningen med denna adapter, (Hands-freetelefon tinns tillgangligt men BT-Ijudkallan visas inte,)
HFP+Audio (+AUDIO): Tack yare delta alternativ kan huvudenheten identifiera anslutningen till denna
adapter (handsfreetelefon ar tillganglig och 8T Audio-kalla visas). Valj inte deUa nar KCE-250BT
anvands.
Off: Med delta alternaliv kan inte huvudenheten identifiera anslutningen med denna adapter.
• BT Audio-kalla ar inte tillganglig fOr KCE-250BT.
• Om du viII veta mer om BT Audio kallans tillganglighet f6r KCE-400BT ska du referera till den
BLUETOOTH®-kompatibla enhetens bruksanvisning.
• La sargente BT Audio non a disponibile con KCE-2508T.
• Per informazioni sulla disponibilila della sorgente BT Audio con KCE-400BT, consultare Ie istruzioni
per I'uso del dispositivo compatibile BLUETOOTH®.
68-16909Z20-A
Nederlands
PyCCKU"
Zorg ervoor dal u hel inslellen van de funclies van de headunil als volgl
vollooil":
06R3aTel1bHO BblnOl1HMTe HacTpoMKy lIlYHK~MM rnaBHoro 611oKa, KaK onMcaHO Nalezy pami~tac 0 skonfigurowaniu funkcji jednostki g/6wnej w
Aal1ee",
spos6b":
INT MUTE-instelling: OFF
HacTpo_Ka INT MUTE: OFF
Polski
Ustawienie INT MUTE: OFF
Ustawienie AUX+; OFF*2
AUX+ installing: OFF*2
HacTpo~Ka AUX+: OFF*2
BLUETOOTH IN (BT IN)-instelling: Adapter (ADPT), HFP of HFP+Audio (+AUDI0),3
HacTpo_Ka BLUETOOTH IN (BT IN): Adapter (ADPT), HFP
*1 Siel na het instellen ACe in op OFF en daarna opnieuw op ON.
*2 Afhankelijk van de headunit is de 'AUX+ instelling' mogelijk niel beschikbaar.
*1 nocne HaCTpO~K\II YCTaHOB\IITe.cJlA napaMeTpa ACe 3Hal.leHVle OFF, a sareM CHOBa ON.
*2 HacTpo~Ka 'I\UX+" MO>KeT OblTb HeAocTYnHa B 3aS\IIClllMOCT\II OT maBHoro onOKa.
• Meer informatie kunl u vinden in de gebruiksaanwijzing van de headunil.
*3 Afhankelijk van de headunil, kan de 'SLUETOOTH IN (8T IN)-instelling" verschillen.
Zie de volgende types head units:
o
nony'-leHliIR AOnOI1HIIITeJ1bHO~ \IIH¢OPMal...l\ll1ll eM. pyKOBO,QCTBO no 3KcnnyaTaulil\ll rnaBHoro onoKa.
*3 HacTpo~Ka "BLUETOOTH IN (BT IN)" MO>K6T pa3m1l.1aTbCA B 3aS\IICIIIMOCnl OT rrlaBHoro onOKa.
CM. cne,nYlOlLI\II6 nmbl rJ1aBHbIX onOKOS:
"n" HFP+Audio (+AUDI0),3
Ustawienie BLUETOOTH IN (BT IN): Adapter (ADPT), HFP lub HFP+Audio (+AUDI0),3
nnA
Type 1 <"Adapter" word! weergegeven als selectie>
TII'I" 1 <"Adapter" oT06pa)f(aeTCR B KayeCTSe ,QocT)'nHoro AflA Bbl60pa 3J16M6HTa>
Adapter (ADPT): Met deze optie kan de headunit een verbinding met deze adapter herkennen. (De
handenvrije telefoon is beschikbaar en de 8T Audio-bran word! weergegeven,) In hat geval van
KCE·250BT, wordt de 8T Audio-bran weergegeven, maar kan deze niet worden gebruikt.
Off: Met deze optie kan de head unit geen verbinding met deze adapter herkennen.
Adapter (ADPT): :nOT napaMeTp n03BOJlReT rIlaBHoMy 6noKy pacn03HaBaTb nO,QKIHO'-l6H\IIe c nOMOlLlblO
3TOre a,namepa. (AOCTYneH TeneQ:>oH C epyHKU\lle~ "Ce060AHble PYK"~ a \IICTO'-lH\IIK 8T Audio
oT06pa>KaeTcR.) nplo1 \IICn0J1b30SaH\II1II MOAerWI KCE·250BT IIICTO'-lHIIIK BT Audio oT06pa>t<aeTcR, HO era
He y.tlaCTCA \IICn0l1b30BaTb.
Off: 3TOT napaMeTp He n03BOllAeT rJ1aBHoMy onoKy pacn03HaeaTb nOAKJlIO'-leHlIle C nOMOlLlblO 3TOro
a,nanTepa.
Type 2 <-Adapter- wordt niet weergegeven als selectie>
HFP: Met deze optje kan de headunit een verbinding met deze adapter herkennen. (De handenvrije
telefoon is beschikbaar, maar de 8T Audio-bron wordt niet weergegeven.)
HFP+Audio (+AUDIO); Met deze optie kan de head unit een verbinding met deze adapter herkennen.
(De handenvrije telefoon is beschikbaar en de 8T Audio-bron wordt weergegeven.) Selecteer dit niet
als u KCE-250BT gebruikt.
Off: Met deze optie kan de head unit geen verbinding met deze adapter herkennen.
• 8T Audio·audiobron is niet beschikbaar bij de KCE·250BT.
• Voor meer informatie over de beschjkbaarheid van de 8T Audio-bron bij de KCE·400BT, kunt u de
gebruikershandleiding raadplegen van het apparaat dat BLUETOOTH@ ondersteunt.
nast~pujllCY
T\II" 2 <"Adapter" He oT06pa>KaeTCA B Kal.J8CTB8 AOCl)fnHoro AJlA Bbioopa 3JleMeHTa>
HFP: 3TOT napaMeTp n03BOIlReT rIlaBHoMy onoKy pacn03HaeaTb nO,QKJlIO'-leH\IIe c nOMOU-lblO :noro
a,nanTepa. (AOCtyneH T6ne¢OH C ¢yHKUlo1e~ "CBo60AHble PYK~1': HO \IICTO'-lHIIIK BT Audio He
OTOOpa>KaeTCA.)
HFP+Audio (+AUDIO): 3TOT napaMBTp n03BonAeT rnaBHoMy 6noKy pacn03HaBaTb nO,QKJlI04eH\IIB C
nOMOl.LlblO 3Toro a,namepa. C[loCTYneH T6neepoH C ¢yHKUlo1e~ "CeoooAHble PYK\II~ a IIICTO'-lH\IIK BT Audio
oT06p8.)f(aeTcA.) He BbI6~pa~Te 3TO 3H8'-ieH~e np~ ~CnOJlb30BaH~VI MOAeIlYI KCE-250BT.
Off: 3TOT nap8MeTp He n03BOIlAeT rIl8BHOMy 6IlOKy pacn03H8B8Tb nOAKIlIO'-ieH~e C nOMOLllblO 3Toro
8A8nTep8.
*1 Po zakonczeniu konfiguracji nalei:y pamiEi1tae 0 ustawieniu opcji ACC na OFF, a nast~pnie ponownym
jest przestawieniu na ON.
*2 W zalei:nosci od jednostki gt6wnej "ustawienie AUX+" moi:e nie bye dost~pne.
oSzczegOtowe informacje zawiera instrukcja ui:ytkownika jednostki gt6wnej.
*3 W zalei:nosci od jednostki gt6wnej "ustawienie BLUETOOTH IN (BT IN)" moi:e si~ r6i:nie.
Zobacz informacje 0 nastEi1pujqcych typach jednostek gt6wnych:
Typ 1 <"Adapter" jest wyswietlany jako opcja do wyboru>
Adapter (ADPD: Ta opcja umoi:liwia rozpoznanie potqczenia z adapterem przez jednostkQ gt6wnq.
(Zestaw gfosnom6wiqcy jest dost~pny i wyswietlane jest ir6dto BT Audio). W przypadku urzqdzenia
KCE-250BT, opcja ir6dta BT Audio jest wyswietJana, ale nie moi:na jej uzy6.
Off: Ta opcja uniemoi:liwia rozpoznanie potqczenia z adapterem przez jednostk~ gl6wnq.
Typ 2 <"Adapter" nie jest wyswietlany jako opcja do wyboru>
HFP: Ta opcja umoi:liwia rozpoznanie potqczenia z adapterem przez jednostkQ gt6wn(\. (dostQpny jest
zestaw gtosnomowiqcy, ale opcja ir6dta 8T Audio nie jest wyswietlana)
HFP+Audio (+AUDIO): Ta opcja umoi:liwia rozpoznanie potqczenia z adapterem przez jednostk~
gt6wnq. (Zestaw gtosnom6wi(\cy jest dost~pny j wyswietlane jest ir6dto BT Audio). Opcji nie naleiy
wybierac, jeieli uiywane jest urz(\dzenie KCE-250BT.
Off: Ta opcja uniemoi:liwia rozpoznanie pot(\czenia z adapterem przez jednostkQ gt6wnq.
• Opcja ir6dla BT Audio nie jest dost~pna w urz<:j,dzeniu KCE-250BT.
o Informacje na temat dost~pnosci ir6dta BT Audio w urz<:j,dzeniu KCE-400BT zawiera instrukcja
obstugi urz<:j,dzenia zgodnego ze standardem BLUETOOTH®.
o lt1CTO'-IHYlK BT Audio 6YAeT HeAoctyneH npYl Y1CnOIlb30BaHYlYI MOAeIl~ KCE-250BT.
olt1HepopMauYlIO 0 B03MO>KHOCTVllo1CnOIlb30BaHYIA ~CTO'-iH~Ka 8T Audio c MOAeJlblO KCE-400BT CM. 8
pyKOBoAcTse no 3KCnJlyaTau~101 BLUETOOTH®-COBMecT~MoroYCTpO~CTBa.
lfIx
EMT/Vt"ti.
rfix
CllpOVTioTC VO oAoKAIlPWOCTC Til Pu91l101l TWV ACITOUPYIWv TIlC; Kuplac; Ilovallac;
Bl~~Illtp"'("'Fot.J;1]tlIi!!l:~"
INT MUTE ,2lE ' OFF
AUX+ ~lE ' OFF,2
BLUETOOTH IN (BT IN) ,2lE ' Adapter (ADPT)' HFP;j\( HFP+Audio (+AUDIO),3
'1 ~'iE1Jt ' ,*£,~!j ACC ,2'iE~ OFF • ~iJtl'i~'iE~ ON •
'2 lll±:lJiiJfjj'iE • "AUX+ ,2'iE" iiTiltlllli'Ofll!lfI •
wc;c~ric;":
pue~lcr~ INT MUTE: OFF
PUe~l"'l AUX+: OFF,2
PUe~l"'l BLUETOOTH IN (BT IN): Adapter (ADPT), HFP i] HFP+Audio (+AUDI0),3
*1 METa ana Til pU81lLOT] cppovTlan: va pu8lliaET£ Tllv £mAoytl ACC a£ OFF KQI, aTTl OUVEX£LO, va TTl
PU8j.lLO£T£ ~avo a£ ON.
*2 AvaAoya \..1£ TTlV KUPIO lJovaoo, 11 "PU8IJlOT] AUX+" £VOEX£TOL va IJTlv eiVOL OLo8EOl\..lTl.
ona A£ffiO\..lEpeLec;, OVoTpE~Te aTO EVX£lpioLO KaTaxou TTlC; KUPLOC; IJOVOOOC;.
*3 H "pU8j.lLOTJ BLUETOOTH IN (BT IN)" £VOEXETOL va OlO$EpeL avaAoyo \..1£ TTlV KUPLO 1l0Vaoo.
AvaTpE~T£ aTOUC; nopoKciTw Tlinouc: KUPIWV \..Iovaowv:
TunoS 1 <H PUSllLan -Adapter- £1..I$avil;eTOl
ws £mAoyrJ>
Adapter (ADPT): AUTtl Tl emAoytl £mTpEn£t aTTlV KUPLO IJOVaOO va ovoyvwpim::1 TTl auvo£OTJlJe
OUTDV TOV \..IeTOTponEo. (H emAoytl TTlA£epWVOU 11£ AeLToupyio hands-free eiVOL OLOSEOlj.lTl KOl
£1l$avi~ETOL Tl nTlytl BT Audio.) LTo 1l0VTEAO KCE-250BT Tl nTlytl BT Audio elJepovl~£TOL OAAO oev
Ilnopei va XPTlOllJonoLTl8£L
Off: AUTtl Tl £mAoytl OEV emTpEn£1 aTTlV KUPtO IJOVaOa va avayvwpio£L TTl OUVOEOT] IJ£ OUTav TOV
lleTaTponEo.
TunoS 2 <H pU8IJlOl) ~ Adapter~ o£v elJpovil;£TOl
ws emAoyD>
HFP: Aun; Tl emAoytl £mTpEn£1 OTTlV KUPLO 1J0VaOO va ovayvwpioeL TTl OUVO£OlllJe oUTav TOV
lJeTOTponEo. (H emAoyrJ TTlA£epWVOU Ile A£tTOUpyio hands-free eiVOl OLo8EOIj.lTl, OAAO Tl nTlytl 8T
Audio oev ql$ovi~ETaL.)
HFP+Audio (+AUDIO): AUTtl Tl emAOyn £mTpEn£1 OTIlV KUPLO Ilovaoo va ovoyvwpia£L TTl OUVO£CJT]
IJE OUTav TOV j.leTOTponEo. (H emAOyn TIlAe$Wvou Ile A£LToupyia hands-free eiVOL Ot08EOlIJT) KOL
elJ¢)Qvi~£TOL 11 nTlYr, 8T Audio.) MTlv XPIlOlj.lOnOLeiTe aUTtlv TTlV emAoyrJ KOTa Til XPtlOTJ TOU
IJOVTEAOU KCE-250BT.
Off: AUTtl 11 £mAoyr, oev £nLTpEnet aTTlV KUP10 \..IOVooa va avoyvwpioeL TTl OUVO£OTJIJ£ aUTav TOV
IlETOTponEo.
o H mlYn BT AUdio oev eiVOL CSLo8EOlj.lTl OTO j.lOVTEAO KCE-250BT.
• no nATlPO¢lOpiec: OXETLKa IJ£ TTl oLa8cOIIJOTTlTO T11<: nllyn<: 8T Audio OTO IJOVTEAO KCE-400BT,
OVoTpE~Te aTO EVXClpioLO KOTOXOU tllC: OUj.lf3otric: IJE BLUETOOTH@ OUOKCUnc:.
(lr)
IN (BT IN) ,2'iE" iiTiifrr5J
0
ilimffl~~T±:!Il'l!'~,
~!!:i 1 <
"Adapter" MiJ'ff.lill]j1j >
Adapter (ADPT): tltillJj:jit,'f±:~~~llJttm~~iI'J~~' (!'.ll""i'm'~iiTUill!ffl • jjftllfj", BT Audio
£\
~D*ill!ffl KCE-250BT ' BT Audio m~,££\l'Illfj", ' f!:!!!!\i*iiEffl •
Off: tltJl!.<J1'fit'U~~~IJtt~jj(~it'J~jj(
0
":
INT MUTE i!ilE' OFF
AUX+ i2lE, OFF,2
BLUETOOTH IN (BT IN) i2lE, Adapler (ADPT), HFP "" HFP+Audlo (+AUDIO),3
'1 il!ltFo. ""£'¥! ACC il!ltj] OFF, !:!\Fol'iil!ltj] ON,
'2l'l\±:!Iljfjjlt, iiTliE7i:itdll!1fI "AUX+ il!lt" ..
• mWijl,lIJj, ilimffl3.'.flliI'JIflP'fIJ/J,
'3 l'l\Hlliliilt, "BLUETOOTH IN (BT IN) ,jilt" iiTilEHiJ ..
'~~~~'~~OO±:~~fflF*$'
'3111±:~jfjj'iE' "BLUETOOTH
lIWB!l~JT±:~~~~ :
(/'J!)
i!~!0YD"'FjEJiJGot~J1.J:)]fjg~il!:J:E
m'lJt
)
0
~~~ 2 < "Adapter" 1'~~~JjH~ >
~1l!1 1 < "Adapter" !m;j<1Jiltl1li >
Adapter (ADPT): *jMmiti'F3.'.fllif\~UEjtltia!ftllili(J<Ji!I&.
~D!l!1ll!1fI KCE-250BT, i:;"", BT Audio ff~f!!7iJtill!lfI ..
Off: *i1!;rm'f:fci'F±:!Il'f\~IJEjtltiaftCliliit'Ji!jj( ..
(iiT~~l~lfI~m!J!ili,
Jr-R'" BT Audio iW. )
HFP: tltjlFJl:fd'f±:~~)jIJtltl,m~it'J~~· (!'.llI'i'il!'~iiT~JilI!ffl ' f§it: BT Audio m'lli'ilHllfj",,, )
HFP+Audio (+AUDIO) tltJl!'Jjitl'f±:~'IlI;l\~IJtt~jj(~'it'J~~· (!'.llji';i1I'~iiTUf!Effl • jjftllfj", BT Audio
m'lit£\ ' ) IlI!lfI KCE-250BT Hi'; • ,i'l?iJjJ!~tlt'j1j •
Oft: tltJl!.<J1'fit"HlJiWll~llttl\Jjj(illHIJ~jj( ,
~1l!1 2 < "Adapter" ~!m;j<1Jiltl1li>
HFP: *i2\;Jm:fci'F±:!Ilif\~IIEjtltiallOliliiI'Ji!jJ1'. (iiTrJill!Ifl~jH!J!ili, i§'f"", BT Audio iW.)
HFP+Audio (+AUDIO): *i1!;rmiti'F±:fllif\~IJEjtlt@ftCliliiI'Ji!jJ1', (iiTrJill!IfI~m!J!ili, Jr-"", BT Audio
V~. ) ill!1fI KCE-250BT lit, ii'i?iJi1!;!'i'tltrm.
Off: *i1!;rm'f:fci'F±:!Ilif\~IJEjtltiailO1l§(J<Ji!IJ1'"
• BT Audio m'l!t~¥.'fjj!jlfl"" KCE-250BT '
• ~M""@jlfl",, KCE-400BT it'J BT AudlO m~'£~~ , ,i'l1i1ilJ BLUETOOTH@I!I'l'l!lliii'lit'JIfIF*IHl'
• BT Audio iW'fiJ1iIflT KCE-250BL
• *T BT Audio iJitE KCE-400BT J:il'JiiTlfltt, ill,"rffl BLUETOOTH@:Il!'l'liJlil,(J<Jlflp'fllll,
~/iLPINE.
Customer Care Registration
..... For easy on-line registration, go to ..www.alpine-usa.com/registration..
Thank you for choosing Alpine! Register your product to protect your investment and receive up-to-date product information.
First name:
_
Last name:
_
Home address: ~-_-----------Street address
City
Phone number: (
)
...:.-_-=-------------
E-mail Address:
_
May we contact you?
• Gender
1. D Male
1.Dves 2.DNo
2. D Female
• Date of Birth Month:
• Marital Status
Year:
1.0 Single
----
2. D Married
• Which ethnicity best describes yourself:
1. D Caucasian
2. D Hispanic
3. D African-American
4. 0 Asian
5.0 Other
_
.Your highest level of education completed:
1. D
2. D
3. D
4. D
5. D
High School Student
High School Graduate
2 Vr. Degree/Some College
Completed 4 Vr. College
Completed Graduate School
1. D
2. D
3. D
4. D
5. D
Executive/Managerial
Secretarial/Clerical
Sales
General Labor
Professional
6. 0 EngineeringlTechnical
7. 0 Agriculture
8.0 Retired
9.
Student
10. DOther
_
1. D Less than $30,000
2. D $30,000 - $50,000
3. D $50,000 - $70,000
o
1. D Addition
2. D Replacement
• Product purchased
_
--t
Previous brand replaced?
1. D Factory installed
3. DOther
2. D Alpine
_
• When you purchased this Alpine unit, did you
compare it with other brands?
1.Dves 2.DNo.
If yes, select all that apply.
1. D Pioneer 2. D Kenwood 3. D Sony
4. D JVC
5.0 JL
6. D Rockford
7. D Other:
_
(JJ
m
»
r:::I:
m
::D
m
• Have you purchased Alpine products before?
7. 0 Subwoofer
1. D Head unit
2. D AN Head unit
8. 0 Multi-Channel Solution
3. D Factory Integration
9. 0 Rear Seat Entertainment
Technology
10. D iPod Solutions
4. D Installed Navigation 11. DMarine
12. DOther
5. D Amplifier
6. D Speaker
Thank you for your cooperation! We value your privacy. This information will remain confidential with Alpine and its affiliates.
_
• Purpose of buying this unit:
4. D $70,000 - $90,000
5. D $90,000 - $110,000
6. DOver $110,000
1. D I usually have more electronic equipment than my friends
2. D I am usually one of the first of my friends to buy the newest
electronic equipment
3. D I usually wait until a product has been out for a while before
I purchase it
4. D I am usually one of the first of my friends to know about the
newest car
5. D I usually know more about cars than my friends
• Serial Number:
_
1. D Alpine --t (Model No.) .,..2. D Other --t (Brand Name)
• Which of the following statements best describes you?
• Model Number:
Year:
• If you purchased a navigation system, which AN
Head unit did you purchase?
• Household Income
Zip/Postal Coda
State/Provo
• Date of Purchase: Month:
• Occupation
1.Dves
2.DNo
• Please tell us the type of vehicle you installed the
Alpine component(s) into:
_
Make:
Model Year:
_
Model:
_
_
• How was this vehicle purchased?
_
1. DBuy
2. DLease
Customer Care Registration is for Product registration.
Failure to complete and return this card does not diminish your warranty rights.
PART NO. 68-10872Z57·A
NO POSTAGE
NECESSARY
IF MAILED
INTHE
UNITED STATES
BUSINESS
REPLY TORRANCE
MAIL CA
PERMIT NO. 320
FIRST-CLASS MAIL
POSTAGE WILL BE PAID BY ADDRESSEE
ATTENTION MARKETING SERVICES
ALPINE ELECTRONICS OF AMERICA INC
PO BOX 2859
TORRANCE CA 90509-9939
11,1"11""1,1,11",1,1,,1,1,,1,1,,,,11,1,1111,,,11
l'
FOR USE IN USA, PLEASE FOLD HERE AND ENSURE THAT
AMERICAN ADDRESS FACES UP.
·dn S3J\f.:l SS3l::100\f N\fIO\fN\fJ
1\fH13l::1nSN3 ON\f 3l::13H OlO.:l 3S\f31d '\fO\fN\fJ NI 3Sn l::IO.:l
1
1'1'1"'11'1'"1'1"1"1'111'""'11'1'1'"'11"1'11
V8IC:13V\JV .:::l0 S3.LV.LS 03.LINn
9L136- ~0906 '17'8 38NVC:lC:lO.L
ld .A.8C:13V\JVC:l8 9v~6~
S81NOC:l.L8313 3NldlV
BSSllIIIY A8 lIYd )I lIM IIYJ. .
UAVd lSNOdlH/1IVW AldlH SSlNISDB lVNOnVNHUN
SJJVJSIlJM
1U0J
1I1VW:I
AmDa
)lVJndlll
. . .VlUlV SYd II
..
..
DZC "ON III:J:J/SUlI