3 Press or to select <1.VOLUME CONTROL>, and press . COMMON SETTINGS 1.VOLUME CONTROL When you press 4 , the <VOLUME CONTROL> menu appears. Press or to select <1.KEYPAD VOLUME>, <2.ALARM VOLUME>, <3.PRINTING END TONE> or <4.SCANNING END TONE> and press . VOLUME CONTROL 1.KEYPAD VOLUME 3 Selecting and Storing Settings to Suit your Needs 5 Press or to select <ON>, <ERROR ONLY> or <OFF> for the tone you are setting, and press . If you selected <ON> or <ERROR ONLY>, go on to step 6. If you selected <OFF>, skip the next step and go on to step 7. KEYPAD VOLUME 6 Press or ON to select the volume for each tone, and press You can select from 1 to 3. VOLUME 1 NOTE • To set the volume for other tones, repeat steps 4 to 6. 7 3-6 Press (Stop) to return to the standby mode. Setting Specifications That Are Common to Each Function (Common Settings) .