Download Canon iR1600 Setup guide

Transcript
1
Enter the Additional Functions menu and open the <1.COMMON SETTINGS> menu.
For details about the procedure above, refer to steps 1 and 2 in “Setting Keypad Volume, Alarm Volume,
Printing End Tone, and Scanning End Tone,” on p. 3-5.
2
Press
or
to select <6.ROTATE PRINT>, and press
.
COMMON SETTINGS
6.ROTATE PRINT
When you press
Selecting and Storing Settings to Suit your Needs
3
3
Press
or
, the <ROTATE PRINT> menu appears.
to select <ON> or <OFF>, and press
.
If you want to print without rotation, select <OFF>.
If you want to print the original rotated 90°, select <ON>.
ROTATE PRINT
4
Press
ON
(Stop) to return to the standby mode.
Setting a Dedicated Tray for Each Function
You can select the function for two output trays (Tray A and Tray B) if the optional Inner 2-way
Tray-B1 is to be used.
IMPORTANT
• This function can be set only when the Inner 2-way Tray-B1 is attached.
NOTE
• When loaded from the stack bypass, the bond paper and transparencies are output only to Tray B. The plain paper can
be output to either Tray A or B.
• The factory setting is as follows:
- Tray A: <COPY> is <DO NOT USE>, <PRINTER> is <USE>
- Tray B: <COPY> is <USE>, <PRINTER> is <DO NOT USE>
• If you set both trays to <USE> for a single function, Tray B will have the priority.
3-12
Setting Specifications That Are Common to Each Function (Common Settings)