Download Canon iR1600 Setup guide

Transcript
Setting the Department ID Management Information
You can register the Department ID after setting the Department ID Management to <ON>.
Setting the Department ID Management to ON enables you to register the following information for
each of the Department IDs from 01 to 99.
- Department ID
- Password
- Maximum number of copies allowed
NOTE
• No Department ID Management Information is registered at the factory.
• When using the control card, it is necessary to register the Department ID into the card to be used.
Enter the Additional Functions menu and open the <2.DEPT. ID MANAGEMNT>, and
press
.
For details about the procedure above, refer to steps 1 to 3 in “Setting the System Administrator ID,” on
p. 4-2.
2
Press
or
to select <ON>, and press
.
DEPT.ID MANAGEMNT
When you press
3
Press
or
ON
, the <DEPT. ID MANAGEMNT> menu appears.
to select <1.DEPT. ID ENTRY>, and press
.
DEPT.ID MANAGEMNT
1.DEPT. ID ENTRY
4
Press
press
or
to select the number to which the department will be designated, and
.
You can also use the numeric buttons to designate the Department number.
DEPT. ID ENTRY
22:
Setting the Department ID Management
4-7
4
System Management Settings
1