Download Agilent Technologies 2000 X-Series Technical data

Transcript
6
Root (:) Commands
:STOP
(see page 790)
Command Syntax
:STOP
The :STOP command stops the acquisition. This is the same as pressing
the Stop key on the front panel.
See Also
• "Introduction to Root (:) Commands" on page 150
• ":RUN" on page 176
• ":SINGle" on page 178
Example Code
180
• "Example Code" on page 176
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide