Download Agilent Technologies 2000 X-Series Technical data

Transcript
16 :FUNCtion Commands
:FUNCtion:GOFT:SOURce1
(see page 790)
Command Syntax
:FUNCtion:GOFT:SOURce1 <value>
<value> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce1 command selects the first input channel for
the g(t) source that can be used as the input to the FFT function.
Query Syntax
:FUNCtion:GOFT:SOURce1?
The :FUNCtion:GOFT:SOURce1? query returns the current selection for the
first input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n> ::= {1 | 2 | 3 | 4} for the 4ch models
<n> ::= {1 | 2} for the 2ch models
See Also
• "Introduction to :FUNCtion Commands" on page 278
• ":FUNCtion:GOFT:SOURce2" on page 287
• ":FUNCtion:GOFT:OPERation" on page 285
286
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide