Download Agilent Technologies 2000 X-Series Technical data

Transcript
25 :SBUS<n> Commands
:SBUS<n>:UART:BASE
(see page 790)
Command Syntax
:SBUS<n>:UART:BASE <base>
<base> ::= {ASCii | BINary | HEX}
The :SBUS<n>:UART:BASE command determines the base to use for the
UART decode and Lister display.
Query Syntax
:SBUS<n>:UART:BASE?
The :SBUS<n>:UART:BASE? query returns the current UART decode and
Lister base setting.
Return Format
<base><NL>
<base> ::= {ASCii | BINary | HEX}
Errors
See Also
• "- 241, Hardware missing" on page 753
• "Introduction to :SBUS<n> Commands" on page 447
• ":SBUS<n>:UART Commands" on page 509
512
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide