Download Agilent Technologies 2000 X-Series Technical data

Transcript
Commands Quick Reference
4
Table 15 :LISTer Commands Summary
Command
Query
Options and Query Returns
n/a
:LISTer:DATA? (see
page 314)
<binary_block> ::=
comma-separated data with
newlines at the end of each row
:LISTer:DISPlay {{OFF
| 0} | {SBUS1 | ON |
1} | ALL} (see
page 315)
:LISTer:DISPlay? (see
page 315)
{OFF | SBUS1 | ALL}
:LISTer:REFerence
<time_ref> (see
page 316)
:LISTer:REFerence?
(see page 316)
<time_ref> ::= {TRIGger |
PREVious}
Table 16 :MARKer Commands Summary
Command
Query
Options and Query Returns
:MARKer:MODE <mode>
(see page 319)
:MARKer:MODE? (see
page 319)
<mode> ::= {OFF | MEASurement |
MANual | WAVeform}
:MARKer:X1Position
<position>[suffix]
(see page 320)
:MARKer:X1Position?
(see page 320)
<position> ::= X1 cursor position
value in NR3 format
[suffix] ::= {s | ms | us | ns |
ps | Hz | kHz | MHz}
<return_value> ::= X1 cursor
position value in NR3 format
:MARKer:X1Y1source
<source> (see
page 321)
:MARKer:X1Y1source?
(see page 321)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= <source>
:MARKer:X2Position
<position>[suffix]
(see page 322)
:MARKer:X2Position?
(see page 322)
<position> ::= X2 cursor position
value in NR3 format
[suffix] ::= {s | ms | us | ns |
ps | Hz | kHz | MHz}
<return_value> ::= X2 cursor
position value in NR3 format
:MARKer:X2Y2source
<source> (see
page 323)
:MARKer:X2Y2source?
(see page 323)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= <source>
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
81