2 Select the printing priority for the various functions ➞ press [OK]. If you select  for a function, that function is given the highest printing priority. [Receive/Fax] appears only if the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed. [Receive] appears only if the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is not installed. <Other> is used for setting the priority for printing reports. PDL prints from MEAP applications are included in <Printer>. However, local print jobs from MEAP applications are included in <Mail Box>. Image Form You can store image forms and superimpose them on the output using the Form Composition mode in the Copy and Mail Box functions. For instructions on using the Form Composition mode, see Chapter 4, "Special Copying and Mail Box Features," in the Copying and Mail Box Guide. IMPORTANT • Up to 100 image forms can be stored. However, this number varies depending on the capacity of the hard disk. • Be sure to place the original that contains the image form on the platen glass. It is not possible to scan an image form from the feeder. NOTE Image forms can also be retrieved from a personal computer and stored in the machine. Storing an Image Form 1 2 Press (Additional Functions) ➞ [Common Settings] ➞ [Register Form for Form Composition]. Press [Register]. Specifying Common Settings 4-43 4 Customizing Settings NOTE If the same printing priority has been specified for multiple functions, printing starts with the first processed print job.