Download Sharp CD-M4000W Service manual
Transcript
CD-M4000W/CP-M4000 SERVICE MANUAL No. S9156CDM4000W MINI COMPONENT SYSTEM MODEL CD-M4000W SPEAKER SYSTEM MODEL CP-M4000 • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used. CONTENTS Page SAFETY PRECAUTION FOR SERVICE MANUAL ........................................................................................................... 2 VOLTAGE SELECTION ..................................................................................................................................................... 2 AC POWER SUPPLY CORD AND AC PLUG ADAPTOR ................................................................................................. 3 SPECIFICATIONS ............................................................................................................................................................. 3 NAMES OF PARTS ........................................................................................................................................................... 4 OPERATION MANUAL ...................................................................................................................................................... 6 DISASSEMBLY .................................................................................................................................................................. 9 REMOVING AND REINSTALLING THE MAIN PARTS ................................................................................................... 12 ADJUSTMENT ................................................................................................................................................................. 13 BLOCK DIAGRAM ........................................................................................................................................................... 17 SCHEMATIC DIAGRAM / WIRING SIDE OF P.W.BOARD .............................................................................................. 20 VOLTAGE ........................................................................................................................................................................ 38 NOTES ON SCHEMATIC DIAGRAM .............................................................................................................................. 39 TYPES OF TRANSISTOR AND LED ................................................................................................................................ 39 WAVEFORMS OF CD CIRCUIT ...................................................................................................................................... 40 TROUBLESHOOTING ..................................................................................................................................................... 41 FUNCTION TABLE OF IC ................................................................................................................................................ 45 FL DISPLAY ...................................................................................................................................................................... 53 REPLACEMENT PARTS LIST/EXPLODED VIEW SHARP CORPORATION –1– This document has been published to be used for after sales service only. The contents are subject to change without notice. CD-M4000W/CP-M4000 SAFETY PRECAUTION FOR SERVICE MANUAL WARNINGS THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1 BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR CLASS 1. THEREFORE IT IS IMPORTANT THAT THE FOLLOWING PRECAUTIONS ARE OBSERVED DURING SERVICING TO PROTECT YOUR EYES AGAINST EXPOSURE TO THE LASER BEAM. 1-WHEN THE CABINET IS REMOVED, THE POWER IS TURNED ON WITHOUT A COMPACT DISC IN POSITION AND THE PICKUP IS ON THE OUTER EDGE THE LASER WILL LIGHT FOR SEVERAL SECONDS TO DETECT A DISC. DO NOT LOOK INTO THE PICKUP LENS. 2-THE LASER POWER OUTPUT OF THE PICKUP UNIT AND REPLACEMENT SERVICE PARTS ARE ALL FACTORY PRESET BEFORE SHIPMENT. DO NOT ATTEMPT TO READJUST THE LASER PICKUP UNIT DURING REPLACEMENT OR SERVICING. 3-UNDER NO CIRCUMSTANCES STARE INTO THE PICKUP LENS AT ANY TIME. 4-CAUTION-USE OF CONTROLS OR ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Laser Diode Properties Material: GaAIAs Wavelength: 780 nm Emission Duration: continuous Laser Output: max. 0.6 mW CAUTION-INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD. STIRRA EJ IN I STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT. ADVERSEL-USYNLIG LASERSTRALING VED ABNING. SE IKKE IND I STRALEN-HELLER IKKE MED OPTISKE INSTRUMENTER. VARO! AVATTAESSA OLET ALTTIINA NAKYMATON LASERSATEILYLLE. ALA TUIJOTA SATEESEEN ALAKA KATSO SITA OPTISEN LAITTEEN LAPI. VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD. STIRRA EJ IN I STRALEN OCH BETRAKTA EJ STRALEN GENOM OPTISKT INSTRUMENT. ADVERSEL-USYNLIG LASERSTRALING NAR DEKSEL APNES. STIRR IKKE INN I STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER. VOLTAGE SELECTION Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage as follows. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V-240 V AC). –2– CD-M4000W/CP-M4000 AC POWER SUPPLY CORD AND AC PLUG ADAPTOR QACCL0005AW00 QACCA0003AW00 QACCE0008AW00 QPLGA0003AWZZ QPLGA0004AWZZ FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. SPECIFICATIONS CD-M4000W General Power source Power consumption Dimensions Weight Tuner AC 110/127/220/230 - 240 V, 50/60 Hz Frequency range 120 W Width: 270 mm (10-5/8") Height: 330 mm (13") Depth: 372 mm (14-11/16") 9.4 kg (20.7 lbs.) Cassette deck Frequency response Signal/noise ratio Amplifier Output power Wow and flutter MPO: 520 W (260 W + 260 W) (10 % T. H.D.) RMS: 300 W (150 W + 150 W) (10 % T.H.D.) Output terminals RMS: 244 W (122 W + 122 W) (0.9 % T. H.D.) Speakers: 6 ohms Input terminals Headphones: 16 - 50 ohms (recommended: 32 ohms) Video/Auxiliary (audio signal): 500 mV/47 kohms FM: 88 - 108 MHz AM: 531 - 1,602 kHz 50 - 14,000 Hz (Normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) 0.3 % (WRMS) CP-M4000 Type Microphone: 1 mV/600 ohms 4-way type speaker system Super Tweeter 8 cm (3-1/8") Tweeter 8 cm (3-1/8") Midrange 25 cm (10") Woofer CD player Type Signal readout D/A converter 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup Frequency response Dynamic range 20 - 20,000 Hz 90 dB (1 kHz) Maximum input power 300 W (Total) 150 W Rated input power CP(Total) 6 ohms Impedance Width: 422 mm (16-5/8") Dimensions Height: 330 mm (13") Depth: 306 mm (12-1/16") 1-bit D/A converter Weight 8.5 kg (18.7 lbs.)/each Specifications for this model are subject to change without prior notice. –3– CD-M4000W/CP-M4000 NAMES OF PARTS CD-M4000W Front panel 6 1. Disc Tray 2. Timer Set Indicator 3. On/Stand-by Button 4. Tape 2 Cassette Compartment 5. Tape 1 Cassette Compartment 6. Equalizer Mode Select Button 7. Volume Control 8. Monster Bass/Demo Mode Button (with Indicator) 9. Disc Tray Open/Close Button 10.Disc Number Select Buttons (with Indicator) 11.Disc Skip Button 12.Tuning and Time Up Button 13.Tape 2 Reverse Play Button (with Indicator) 14.CD Button 15.Tuner (Band) Button 16.Tape (1 2) Button 17.Video/Auxiliary Button 18.Dimmer Button 19.Clock Button 20.Timer/Sleep Button 21.Headphone Socket 22.CD or Tape Stop Button (with Indicator) 23.CD Play or Repeat, Tape 1 Play, Tape 2 Forward Play Button (with Indicator) 24.Tape 2 Reverse Mode Select Button 25.CD Track Up or Fast Forward, Tape 2 Fast Wind, Tuner Preset Up Button 26.Tuning and Time Down Button 27.Memory/Set Button 28.Tape 2 Record Pause Button 29.CD Track Down or Fast Reverse, Tape 2 Fast Wind, Tuner Preset Down Button 30.Microphone Level Control 31.Microphone Socket 7 8 9 10 11 1 2 3 4 5 12 13 14 15 16 17 22 23 24 25 18 19 20 21 26 27 28 29 30 31 Display 7 8 1 1. FM Stereo Mode Indicator 2. FM Stereo Receiving Indicator 3. Karaoke Mode Indicator 4. CD Repeat Play Indicator 5. CD Pause Indicator 6. CD Play Indicator 7. Tape 2 Record Indicator 8. Tape Reverse Mode Indicator 9. Disc Number Indicators 10.Timer Play Indicator 11.Memory Indicator 12.Tape 2 Reverse Play Indicator 13.Tape 1 Play or Tape 2 Forward Play Indicator 14.Sleep Indicator 15.Timer Recording Indicator 16.Spectrum Analyser/Volume Level Indicator 2 345 6 16 –4– 16 9 10 11 12 13 14 15 16 CD-M4000W/CP-M4000 CD-M4000W Rear panel 1. FM 75 Ohms Aerial Terminal 2. FM Aerial Earth Terminal 3. AM Loop Aerial Socket 4. Span Selector Switch 5. Video/Auxiliary (Audio Signal) Input Sockets 6. Speaker Terminals 7. AC Power Lead 8. AC Voltage Selector 1 2 3 4 5 6 8 Remote control 7 1 1. Remote Control Transmitter 2. Echo Level Up and Down Buttons 3. Karaoke Mode Button 4. Disc Number Select Buttons 5. CD Clear Button 6. Tape 2 Record Pause Button 7. CD Track Down or Fast Reverse, Tape 2 Fast Wind, Tuner Preset Down Button 8. Equalizer Mode Select Button 9. Tape 2 Reverse Play Button 10.CD Button 11.Tuner (Band) Button 12.On/Stand-by Button 13.Monster Bass Button 14.CD Random Button 15.CD Memory Button 16.CD Pause Button 17.CD Track Up or Fast Forward, Tape 2 Fast Wind, Tuner Preset Up Button 18.CD or Tape Stop Button 19.CD Play or Repeat, Tape 1 Play, Tape 2 Forward Play Button 20.Video/Auxiliary Button 21.Tape (1 2) Button 22.Volume Up and Down Buttons 2 3 4 5 6 7 8 9 10 11 12 13 Buttons with " " mark in the illustration can be operated on the remote control only. Other buttons can be operated both on the main unit and the remote control. –5– 14 15 16 17 18 19 20 21 22 CD-M4000W/CP-M4000 CP-M4000 Speaker system 1 1. Tweeter 2. Super Tweeter 3. Midrange 4. Woofer 5. Bass Reflex Duc 6. Speaker Terminals 2 5 4 3 OPERATION MANUAL System Connections Setting the AC voltage selector Setting the FM/AM span selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC). Connecting the AC power lead After making all connections, plug the unit. If you plug the unit first, the unit will enter the demonstration mode. Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. AC Plug Adaptor In areas (or countries) where a wall socket as shown in illustration is used, connect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug adaptor is not included in areas where the wall socket and AC power plug can be directly connected (see illustration ). The International Telecommunication Union (ITU) has established that member countries should maintain either a 100 kHz or a 50 kHz interval between broadcasting frequencies of FM stations and 10 kHz or 9 kHz for AM station. The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2). Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to the interval (span) of your area. 1 To change the tuning zone: 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Set the SPAN SELECTOR switch (on the rear panel) as follows. For 50 kHz FM interval (9 kHz in AM) 50/9 For 100 kHz FM interval (10 kHz in AM) 100/10 3 Whilst pressing down the button and the MONSTER-BASS button, press the ON/ STAND-BY button until "CLEAR AL" appears. 2 Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. –6– 6 CD-M4000W/CP-M4000 Setting the Clock 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. When the 12-hour display is selected, "AM" will change automatically to "PM". 5 Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display. 1 2 Press the ON/STAND-BY button to turn the power on. Press the TUNING/TIME ( or ) button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. Press the CLOCK button and within 5 seconds, press the MEMORY/SET button. The hour will not advance even if minutes advance from "59" to "00". The clock begins counting from "0" seconds. (Seconds are not displayed.) The time display will disappear after a few seconds. To confirm the time display: 3 Press the TUNING/TIME ( or ) button to select 24-hour or 12hour display and then press the MEMORY/SET button. Press the CLOCK button. The time display will appear for about 5 seconds. Note: The "CLOCK" or time will flash at the push of the CLOCK button when the AC power supply is restored after a power failure or unplugging the unit. Readjust the clock as follows. "0:00" "AM 12:00" The 24-hour display will appear. (0:00 - 23:59) The 12-hour display will appear. To readjust the clock: Perform "Setting the Clock" from the beginning. If the time display is flashing, step 3 (for selecting the 24-hour or 12-hour display) will be skipped. (AM 12:00 - PM 11:59) "AM 0:00" The 12-hour display will appear. (AM 0:00 - PM 11:59) Note that this can only be set when the unit is first installed or it has been reset. To change the 24-hour or 12-hour display: 1 2 Remote Control Test of the remote control Face the remote control directly to the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the music. Remote sensor 0.2 m - 6 m (8" - 20') –7– Clear all the programmed contents. Perform "Setting the Clock" from the beginning. CD-M4000W/CP-M4000 Troubleshooting Chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. General Cassette deck Symptom Cannot record. Possible cause Is the erase-prevention tab removed? Cannot record tracks with proper sound quality. Is it a normal tape? (Yo u cannot record on a metal or CrO tape.) Possible cause Did a power failure occur? Reset the clock. Cannot erase completely. When a button is pressed, the unit does not respond. Set this unit to the power stand-by mode and then turn it back on. If the unit still malfunctions, reset it. Cannot hear treble. Sound fluctuation. Are the capstans, pinch rollers, or heads dirty? Cannot remove the tape. No sound is heard. Is the volume level set to "0"? If a power failure occurs during playback, the heads remain engaged with the tape. Do not open the compartment forcibly. Wait until electricity resumes. Symptom The clock is not on time. Sound skipping. Is there any slack? Is the tape stretched? Are the headphones connected? Are the speaker wires disconnected? Is the karaoke mode set to "L-CH", "R-CH" or "V-CANCEL"? Symptom The vocal part of a multiplexed disc is not heard. CD player Symptom Playback does not start. Playback stops in the middle or is not performed properly. Playback sounds are skipped, or stopped in the middle of a track. Karaoke Possible cause Is the disc loaded upside down? Does the disc satisfy the standards? Possible cause Is the karaoke mode set to "L-CH", "R-CH" or "V-CANCEL"? Remote control Symptom The remote control does not operate. Is the disc distorted or scratched? Is the unit located near excessive vibrations? Is the disc very dirty? Possible cause Is the AC power lead of the unit plugged in? Is the battery polarity respected? Has condensation formed inside the unit? Are the batteries dead? Is the distance or angle incorrect? Does the remote control sensor receive strong light? Tuner Symptom Radio makes unusual noise consecutively. Possible cause Is the unit placed near the TV or computer? Is the FM aerial or AM loop aerial placed properly? Move the AC power lead away from the aerial if located near. Troubleshooting Chart If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. Clearing all the memory (reset) 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the button and the MONSTER-BASS button, press the ON/STAND-BY button until "CLEAR AL" appears. Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. Before transporting the unit 1 2 3 4 5 Press the ON/STAND-BY button to turn the power on. Press the CD button. Press the OPEN/CLOSE button to open the disc tray. Remove all CDs inserted in the unit. Press the OPEN/CLOSE button to close the disc tray. Make sure that "NO DISC" is displayed. Press the ON/STAND-BY button to enter the stand-by mode, and then unplug the AC power lead from the wall socket. –8– CD-M4000W/CP-M4000 DISASSEMBLY CD-M4000W Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling. 4. Take sufficient care on static electricity of integrated circuits and other circuits when servicing. (A1) x 2 ø3 x 12mm Top Cabinet Side Panel (Right) (B1) x 2 ø3 x 10mm (A1) x 2 ø3 x 12mm Side Panel (Left) CD-M4000W STEP REMOVAL PROCEDURE FIGURE 1 Top Cabinet 1. Screw ....................... (A1) x4 9-1 2 Side Panel (Left/Right) 1. Screw ....................... (B1) x8 9-1 3 CD Player Unit/ CD Tray Cover 1. Turn on the power supply, ... open the disc tray, take out the CD tray cover, and close. (Note 1) 2. Screw ....................... (C1) x1 3. Hook ......................... (C2) x3 4. Hook ......................... (C3) x2 5. Socket ...................... (C4) x2 9-2 9-2 1. Screw ..................... (D1) x10 2. Socket ...................... (D2) x1 5 Main PWB 1. Screw ....................... (E1) x1 9-2 2. Flat Cable ................ (E2) x1 10-2 3. Socket ...................... (E3) x4 10-2,10-3 7 8 9 10-3 10-2 10-3 1. Screw ....................... (G1) x1 2. Socket ...................... (G2) x1 2. Hook ......................... (G3) x2 10-3 1. Knob ......................... (H1) x1 2. Screw ..................... (H2) x12 3. Flat Cable ................ (H3) x1 10-4 Tape Mechanism 1. Open the cassette holder. 2. Screw (J1) x5 10-4 Display PWB Headphones PWB 1. Screw ....................... (K1) x1 10-4 Mic PWB 1. Screw ....................... (L1) x2 10-4 12 Turntable 1. Hook ........................ (M1) x2 2. Cover ...................... (M2) x1 10-5 13 Disc Tray 1. Turn fully the lock lever in the . arrow direction. 2. While holding the lock lever,rotate the cam gear until the cam gear rib engages with the clamp lever. 3. Push the slide chassis backward to engage the claw with the groove and remove it in the direction of the arrow. ................. (N1) x6 9-3 15 CD Mechanism 1. Screw ....................... (P1) x1 2. Hook ......................... (P2) x2 3. Socket ...................... (P3) x4 1. Hook ......................... (Q1) x2 2. Hook ......................... (Q2) x3 (C2) x 3 1 Pull 2 CD Player Unit Transformer PWB (C3) x 1 (D1) x 1 ø3 x 10mm (E1) x 1 ø3 x 10mm Lug Wire (D2) x 1 11 CD Servo PWB (Note 2) CD Tray Cover (C1) x 1 ø3 x 10mm 10 14 Figure 9-1 (C3) x 1 1. Screw ....................... (F1) x7 2. Socket ...................... (F2) x2 3. PWB Holder ............. (F3) x3 4. Flat Wire ................... (F4) x1 Front Panel Rear Panel 1 Rear Panel with Fan Motor Amp. PWB (B1) x 2 ø3 x 10mm CD Servo PWB (C4) x 2 4 6 (B1) x 4 ø3 x 10mm Amp. PWB (D1) x 7 ø3 x 10mm (D1) x 2 Rear Main ø3 x 10mm Panel PWB Figure 9-2 Lock Lever 10-1 CD Player Unit (Bottom View) 10-6 11-1 Figure 9-3 Note 2: 1. After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of the connector so as to protect the optical pickup from electrostatic damage. Note 3: 1. Be careful not to break the claw of the CD mechanism. 2. When fining back the cam gear assembly, let it lock by front movement. 11-2 Note 1: How to open the changer manually. (Fig. 9-3) 1. In this state, turn fully the lock lever in the arrow direction through the hole on the loading chaissis bottom. 2. While holding the lock lever, rotate the cam gear anticlockwise until the cam gear rib engages with the clamp lever. (Fig. 10-1) 3. After that, push forward the slide Chaissis. –9– CD-M4000W/CP-M4000 (H1) x 1 Clamp Lever Display PWB (H3) x 1 (L1) x 2 ø3 x 10mm (H2) x 12 ø3 x 10mm Mic PWB CD Player Unit (Top View) Tape Mechanism Front Panel Lug Wire Cam Gear Rib Open (J1) x 5 ø3 x 10mm Cassette Holder Figure 10-1 (K1) x 1 ø3 x 10mm Lug Wire (E3) x 1 Headphones PWB (E3) x 1 Figure 10-4 (M2) x 1 Power (F2) x 1 PWB (E2) x 1 Mic PWB Transformer PWB Turntable Main PWB Main PWB Slide Chassis (F2) x 1 (E3) x 1 (M1) x 2 Amp. PWB Figure 10-2 (F1) x 2 ø3 x 10mm (F4) x 1 Headphones PWB (F1) x 2 ø3 x 10mm Tape Mechanism (G2) x 1 CD Player Unit Figure 10-5 (N1) x 3 Front Panel (E3) x 1 3 2 (G3) x 1 (G3) x 1 1 (F3) x 1 Push Push (F1) x 3 ø3 x 8mm Amp. PWB (G1) x 1 ø3 x 8mm (N1) x 3 (F3) x 2 Push Push Figure 10-3 Figure 10-6 – 10 – CD-M4000W/CP-M4000 (Q2) x 3 CD Mechanism (P1) x 1 ø3 x 8mm CD Servo PWB Slide Chassis (P3) x 2 (Q1) x 1 (Q1) x 1 (P2) x 2 CD Mechanism Chassis (P3) x 2 Slide Chassis Figure 11-1 Figure 11-2 CP-M4000 STEP 1 REMOVAL Front Panel PROCEDURE FIGURE Speaker Box Ass'y 1. Net .......................... (A1) x1 11-3,11-4 2. Catching Holder ..... (A2) x4 3. Screw ..................... (A3) x4 2 Super Tweeter 1. Screw ..................... (B1) x2 11-5 3 Woofer 1. Screw ..................... (C1) x4 11-5 4 Tweeter 1. Screw ..................... (D1) x4 11-5 5 Midrange 1. Screw ..................... (E1) x4 11-5 Front Panel (A3) x 4 ø4 x 20mm (A2) x 4 Front Panel Screwdriver (A1) x 1 Figure 11-3 Driver should be pried away from Speaker Box. Speaker Box Ass'y Woofer (C1) x 4 ø4 x 20mm Speaker Box Ass'y Front Panel Figure 11-4 (B1) x 2 ø2.6 x 10mm (D1) x 4 ø3 x 12mm Super Tweeter Figure 11-5 – 11 – Tweeter (E1) x 4 Midrange ø3 x 12mm CD-M4000W/CP-M4000 REMOVING AND REINSTALLING THE MAIN PARTS TAPE 2 TAPE MECHANISM SECTION Clutch Ass'y Perform steps 1 to 7 and 9 of the disassembly method to remove the tape mechanism. Record/Playback Head How to remove the record/playback and erase heads (TAPE 2) (See Fig. 12-1) Erase Head 1. When you remove the screws (A1) x 2 pcs., the recording/ playback head and three-dimensional head of the erasing head can be removed. How to remove the playback head (TAPE 1) (See Fig. 12-2) (A1) x 2 Ø2 x 6mm 1. When you remove the screws (B1) x 2 pcs., the playback head. Figure 12-1 TAPE 1 Clutch Ass'y How to remove the pinch roller (TAPE 1/2) (See Fig. 12-3) Playback Head 1. Carefully bend the pinch roller pawl in the direction of the arrow <A>, and remove the pinch roller (C1) x 1 pc., in the direction of the arrow <B>. Note: When installing the pinch roller, pay attention to the spring mounting position. (B1) x 1 Ø2 x 9mm How to remove the belt (TAPE 2) (See Fig. 12-4) (B1) x 1 Ø2 x 5mm 1. Remove the main belt (D1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (D2) x 1 pc. Figure 12-2 How to remove the belt (TAPE 1) (See Fig. 12-4) 1. Remove the main belt (E1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (E2) x 1 pc. How to remove the motor (See Fig. 12-5) 1. Remove the screws (F1) x 2 pcs., to remove the motor. Tape Motor Pinch Roller (C1) x 1 Pull Pull <A> Pinch Roller Pawl <B> Figure 12-3 TAPE 2 FF/REW Belt (D2) x 1 Clutch Ass'y (F1) x 2 Tape Motor FF/REW Tape Roller Motor TAPE 2 Main Belt (D1) x 1 TAPE 1 Main Belt (D1) x 1 Ø2.6 x 5mm TAPE 1 Main Belt (E1) x 1 FF/REW Belt (E2) x 1 Flywheel Ass'y Main Belt (E1) x 1 Flywheel Ass'y Figure 12-5 Figure 12-4 – 12 – FF/REW Roller CD-M4000W/CP-M4000 CD MECHANISM SECTION Perform steps 1, 2, 3, 12, 13, 14 and 15 of the disassembly method to remove the CD mechanism. Slide Chassis How to remove the CD loading motor (See Fig. 13-1) CD Loading Motor CD Loading Motor PWB (A1) x 1 (A1) x 2 1. Bend the hooks (A1) x 5 pcs., to remove the CD loading motor. 2. Remove the drive belt (A2) x 1 pc. (A1) x 2 CD Loading Motor Pulley Drive Belt (A2) x 1 Figure 13-1 How to remove the pickup (See Fig. 13-2) Stop Washer (B3) x 2 (B1) x 1 ø2.6 x 6mm 1. Remove the stop washer (B1) x 1 pc., to remove the gear (B2) x 1 pc. 2. Remove the screws (B3) x 2 pcs., to remove the shaft (B4). 3. Remove the pickup. Note After removing the connector for the optical pickup from the connector wrap the conductive aluminium foil around the front end of connector so as to protect the optical pickup from electrostatic damage. Pickup Shaft (B4) x 1 CD Mechanism Gear (B2) x 1 Figure 13-2 ADJUSTMENT • Tape Speed MECHANISM SECTION • Driving Force Check Torque Meter Test Tape Adjusting Point Specified Value Instrument Connection MTT-111 Variable Resistor in motor. 3,000 ± 30 Hz Speaker terminal (Load resistance: 6 ohms) Specified Value Play: TW-2111 Normal speed Tape 1: Over 80 g Tape 2: Over 80 g • Torque Check Torque Meter Specified Value Tape 1 TAPE MECHANISM Tape 2 Play: TW-2111 30 to 80 g.cm 30 to 80 g.cm Fast forward: TW-2231 — 70 to 180 g.cm Rewind: TW-2231 — 70 to 180 g.cm Tape Motor Variable Resistor in motor Figure 13-3 – 13 – CD-M4000W/CP-M4000 • FM RF Signal generator: 1 kHz, 40 kHz dev., FM modulated TUNER SECTION fL: Low-range frequency fH: High-range frequency • AM IF/RF Signal generator: 400 Hz, 30%, AM modulated Test Stage Frequency Frequency Display Setting/ Instrument Adjusting Connection Parts AM IF 450 kHz 1,602 kHz T351 AM Band Coverage — 531 kHz (fL): T306 *2 1.1 ± 0.1 V 990 kHz (fL): T303 AM Tracking 990 kHz *1. Input: Antenna *2. Input: Antenna FM Band Coverage — FM RF 98.00 MHz 98.00 MHz (10-30 dB) *1 *1 CNP301 AM LOOP ANTENNA T303 C393 FM BAND COVERAGE fL 10.7 MHz 98 MHz MAIN PWB IC301 T302 L312 FM IF FM RF T301(fL): *1 1.3 V ± 50 mV L312 *2 Setting/ Adjusting Point Test Stage Frequency Frequency Display IF TP301 87.50 MHz Instrument Connection *1. Input: Antenna Output: TP301 *2. Input: Antenna Output: Speaker terminal • FM IF Signal generator: 10.7 MHz, FM modulated Output: TP302 Output: TP301 SO301 FM ANTENNA TERMINAL Setting/ Adjusting Point Test Stage Frequency Frequency Display AM TRACKING fL *1. Input: Antenna Instrument Connection T302 *1 (Turn the core of transformer T302 fully counterclock wise) Output: TP301 T306 T301 AM BAND COVERAGE fL T351 AM IF TP302 R357 Figure 14-1 ADJUSTMENT POINTS CD SECTION • Adjustment Since this CD system incorporates the following automatic adjustment functions, readjustment is not needed when replacing the pickup. Therefore, different PWBs and pickups can be combined freely. Each time a disc is changed, these adjustments are performed automatically. Therefore, playback of each disc can be performed under optimum conditions. T Stopped CH1=500 mV DC 10:1 T CH2=200 mV DC 10:1 CH3=1 V DC 10:1 1999/04/05 20:26:47 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 Items adjusted automatically (1) Offset adjustment (The offset voltage between the head amplifier output and the VREF reference voltage is compensated inside the IC.) * Focus offset adjustment * Tracking offset adjustment (2) Tracking balance adjustment (waveform drawing Fig.14-2 EFBL) (3) Gain adjustment (The gain is compensated inside the IC so that the loop gain at the gain crossover frequency will be 0 dB.) * Focus gain adjustment * Tracking gain adjustment TE 3 EFBL 2 CH2 v/DIV 200 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2k Figure 14-2 – 14 – =Trigger= Mode : SINGLE Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs CD-M4000W/CP-M4000 TEST MODE • Setting the test mode Any one of test mode can be set by pressing several keys as follows. <X-BASS> + <CD> + <POWER> TEST:CD operation test Function:-CD test mode. -Enter test mode. C D T E S T IL isn't done OPEN/CLOSE operation is using manual. << >>, << >> buttons make pick's slide possible. <<PLAY>> key input. Do TOC IL. Do normal play When these following key is input into PLAY key, track number can be appoint directly <<MEMORY>> key input Adjustment result automatically will display as below for each 2 sec : a) "FOF_XXXX" b) "TOF_XXXX" c) "TBA_XXXX" d) "TGA_XXXX" f) "FGA_XXXX" g) "RFL_XXXX" explanation: a) Focus off set b) Tracking off set c) Tracking balance d) Tracking Gain f) Focus Gain g) RF level shift ="FOF_XXXX" ="TOF_XXXX" ="TBA_XXXX" ="TGA_XXXX" ="FGA_XXXX" ="RFL_XXXX" <<MEMORY>> key input. Laser ON. <<MEMORY>> key input. Tracking OFF play at that specific point. <<MEMORY>> key input. << << << 1>> key: Track 4 2>> key: Track 9 3>> key: Track 15 Tracking ON play from that specific point. <<MEMORY>> key input. Adjustment result automatically will display as below for each 2 sec : a) "FOF_XXXX" b) "TOF_XXXX" c) "TBA_XXXX" d) "TGA_XXXX" f) "FGA_XXXX" g) "RFL_XXXX" <<STOP>> key input. <<STOP>> key input. STOP VOL — Last memory BAL — CENTER P.GEQ — FLAT X-BASS — OFF STOP Sliding the PICKUP with << >>, << >> button must only be in STOP mode. To cancel : Power OFF – 15 – CD-M4000W/CP-M4000 Standard Specification of Stereo System Error Message Display Contents Error Contents Display Output while Device Protection Operation 'PROTECT' Notes 00: While in Protect Circuit Operate 01: Over Current Detection 02: DC Detection 03: TAPE Mechanism Error 'ER-TA**' 00: Tape Mechanism Error 01: Initial Error 02: 03: CD/VCD Pickup Mechanism Error 'ER-CD**' 00: Pickup Mechanism Error 01: PU-IN SW Detection NG 02: 03: CD Changer Mechanism Error 'ER-CD**' 10: Changer Error 11: Initial Error 12: 13: Tray Error 'ER-CD**' 20: Tray Error 21: 22: 23: Micon Communication Error Focus Not Match IL Time Over TUN PLL Unlock 'ER-CD**' 30: System-VCD 31: System-CD Servo 'NO DISC' 'NOT READ' 'ER-TU**' 00: TUN Error 01: PLL Unlock 02: 03: – 16 – CD-M4000W/CP-M4000 5 6 7 8 9 3 4 5 6 1 2 3 4 5 6 CNS4 4 2 1 2 3 4 5 6 CNP4 OC, DISC NO 3 1 1 2 17 25 FD CLAMP SW 2 M3 CD LOADING SLDO CD RES 1 CNP8 CL 6 DI 5 DO +5V (+B5 ) 4 CE +5V (+B5) 3 DRF DGND 2 WRQ AGND 1 M TO DISPLAY SECTION L-CH R-CH CNP7 TO MAIN SECTION BI4 SW3 SW2 DISC CLAMP NUMBER SW1 OPEN/ CLOSE Q3 CONT3 CONT4 75 69 57 63 DI 56 64 DO 55 65 VWRQ 51 50 66 VRES 40 67 DRF IC1 LC78645E CD SERVO 37 28 19 SLDO 23 9 10 LDD 8 LDS TIN1 7 TIN2 FIN2 RVDD 41 46 FIN1 77 18 47 41 42 39 38 35 SPDO 22 LVDD ADAVDD XVDD VVDD RFVDD 49 XIN 5 TO CONT5 26 SPO 48 XOUT XL1 33.8688 MHz CONT2 70 71 25 RCHO 62 CL LVSS 61 CE RVSS LCHO 42 43 44 45 FD0 21 TD0 20 +5V 79 80 24 23 +3.3V IC2 M63001FP FOCUS/TRACKING/ VCC2 SPIN/SLED VCC3 DRIVER 18 VCC1 40 VCC4 28 29 22 21 14 8 Q2 +3.3V 4 CONSTANT VOLTAGE 5 6 7 15 16 26 27 LASER DRIVER +3.3V Q1 M1 SPINDLE MOTOR TRACKING COIL FOCUS COIL PICKUP UNIT +5V M2 SLED MOTOR Figure 17 BLOCK DIAGRAM (1/3) – 17 – M M SW4 PICKUP IN CD-M4000W/CP-M4000 FM ANTENNA TERMINAL +B4 10.7MHz FM IF 7 8 FM L312 RF IC303 LA1832S FM IFDET./ FM MPX./ AM IF T301 AM OSC IN FM OSC AM LOOP ANTENNA OSC BUFF Q302 CNP301 AM TRACKING 2 1 T306 T303 AM BAND COVERAGE X352 4.5MHZ VT CE ICK1 M65856SP MIC AMP. JK1 MIC 20 1 22 15 16 OSC LATCH 40 +B4 L OUT 36 9 R OUT 35 8 6 VCC 23 5 6 17 21 JK601 VIDEO/AUX L-CH R-CH 2 IC101 PLAYBACK AND RECORD/ PLAYBACK AMP. 3 L L(T1) 1 R(T1) 24 SWITCHING REC P.B. Q103Q106 P.B L NF 3 R NF 22 IC601 LC75341 AUDIO PROCESSOR H/N L REC 9 REC R REC 16 12 NOR/ CRO2 15 T1/T2 19 Q603 Q60 Q604 Q60 SYST MUT 1 3 IC860 KIA4558P OPE AMP. +B4 4 L PB 21 R Q121 Q122 MUTING 3 8 Q864 Q865 +B4 REC/ +B4 8 7 L REC 18 R –B2 MOTOR DRIVER 8 L NF 17 R NF REF 14 –20dB ATT 21 R 4 L Q862 Q863 5 20 POP REDUCE 6 T1/T2 TAPE MECHANISM ASS'Y 10 ALC Q704 Q705 SOLENOID DRIVER 4 IC703,IC704 1 KIA4558P OPE AMP. 7 28 30 IC701(2/2) IX0460AW 29 Q708 SWITCHING SWITCHING Q107 Q108 DI 1 CE 2 CLK 24 7 18 8 17 L R L R MIC 13 L(T2) 2 R(T2) 23 +B4 23 L 9 R 16 TAPE L 10 R 15 TUNER L 11 R 14 CD L 12 R 13 CNS11 R 1 TAPE 2 L-CH R-CH RECORD PLAYBACK HEAD AC BIAS 9 10 CONSTANT VOLTAGE ICK2 KIA4558P OPE AMP. 3 TAPE 1 L-CH PLAYBACK R-CH HEAD 4 MO/ST FM/AM 1 L 7 R 2 QK1 FROM CD SERVO SECTION CNP7 3 5 R IN 32 +B5 7 FM/AM Q360 L IN 31 12 13 VRK1 MIC VOLUME +B FM 11 IC302 LC72131 PLL(TUNER) +B4 CLOCK 41 DATA 42 MIC IN PHASE(FM/AM) 5 X351 456kHz CF351 450kHz MO/ST T351 CF352 AM IF 1 2 4 5 9 8 17 13 AM MIX AM IF GND VCC FM MPX IN DET VCO L 14 R 15 FM/AM OUT MPX IN 23 21 24 7 18 16 12 DO 4 3 FM OSC 2 CF303 T302 9 DI CL B.P.F 6 STEREO IC301 TA7358AP FM FRONT END 1 BF301 AM RF IN SO301 +B3 T1/T2 Q111 SWITCHING Q109 SWITCHING Q110 BIAS ERASE HEAD BIAS Q128 OSC L104 SWITCHING Q126 Q124 +B4 Figure 18 BLOCK DIAGRAM (2/3) – 18 – BIAS CD-M4000W/CP-M4000 FL701 FL DISPLAY +B4 6 ~ 13 1 2 3 14 ~ 16 23 ~ 32 33 ~ 44 JOG701 JOG VOLUME 56 57 58 Q701-Q703 +B5 +B5 57 56 55 54 53 52 51 50 49 48 +B6 46 45 44 43 42 41 40 VDD 61 RX701 1 REMOTE SENSOR 3 2 67 - 78 79 VLOAD 80 - IC701(1/2) IX0460AW SYSTEM MICROCOMPUTER 89 KEY SW701-SW703 SW709-SW717 SW722-SW734 IC702 BU2092F INPUT/OUTPUT +B5 EXPANDER 1 18 2 IC702 - 90 39 38 37 36 35 +B5 AVDD 34 33 - 31 1 2 4 5 6 7 9 10 11 12 13 15 16 17 +B5 +B6 20 21 22 23 24 3 22 58 4 +B5 XL701 4.1943 MHz Q709 RESET SP. DET. CE CLK DI DO VDD RESET VDD - - 100 - 92 93 Q901-Q904 TO CD SERVO SECTION +B3 +B5 SPAN SELECTOR FAN MOTOR DRIVER Q907 1 VH+ R 14 L 18 –20dB ATT VL– 6 VL+ 2 M SP RELAY ON-OFF VH– IC901 STK41203 POWER AMP. Q603 Q605 Q604 Q606 SYSTEM MUTE JK670 HEADPHONES +B5 Q905 11 R-OUT 9 L-OUT M901 FAN MOTOR MAIN RY901 SO901 SPEAKER TERMINAL 7 5 T801 POWER TRANSFORMER –B2 F802 T2.5A L 250V Q864 Q865 +B4 F804 T5A L 250V F803 T2.5A L 250V D809 F805 T5A L 250V –B1 REC/PLAY D810 +B1 +5V +B5 IC701(2/2) IX0460AW 29 Q852 M12V +B3 28 30 VOLTAGE REGULATOR Q850 D811~D814 VF1 +B4 A+10V F806 T2A L 250V SW801 VOLTAGE SELECTOR F807 T2A L 250V Q851 230-240 V 220 V 127 V VF2 Q803 110 V F801 T5A L 250V 3 8 +B2 T.F. T1/T2 AC POWER SUPPLY CORD AC 110/127/220/ 230-240 V, 50/60 Hz –VF BIAS Figure 19 BLOCK DIAGRAM (3/3) – 19 – CD-M4000W/CP-M4000 A PICKUP UNIT CD SERVO PWB-C M PU-IN R11 10K C3 47/25 R13 1K 7 6 5 4 R14 FD 8 FO+ 9 FO– 21 20 19 18 17 16 15 14 13 12 11 10 TR+ MUTE 3 2 IC2 M63001FP FOCUS/TRACKING/ SPIN/SLED DRIVER – + SP+ 6 SP– 5 4 SL+ SL– 3 PUIN 2 1 GND CNP3 1 TR– 6 5 4 3 2 1 C39 100/10 SL– 1 2 3 4 5 6 CT2 0.001 1 2 3 TP3 R12 4 330 C8 5 0.0047 6 7 TP1 C50 8 22P TP2 9 (CH) 10 C10 11 10/50 C9 12 100/10 13 C11 0.22/50 14 15 4 16 C12 17 100P 18 19 20 GND 1 2 3 4 5 6 C6 0.1 2 SL+ + SPIN – + SLIDE – C5 0.047(ML) R10 27K R65 3.3 + – SW4 PICKUP IN M C38 0.01 – + M1 SPINDLE MOTOR M2 SLED MOTOR CNS3A CD MOTOR PWB-G CNS3B E CNP3A GND 1 TR– 2 TR+ FO+ 3 4 FO– 5 GND 6 PD VR 7 LD 8 CNP2 STANDBY VCC R44 12K SLDO 1 2 3 4 5 6 7 8 VREF TR– 1 2 3 4 5 6 7 8 CT1 0.001 C40 220/6.3 FO+ FO– D CNS2A TR– 1 TR+ 2 FO+ 3 FO– 4 5 PD 6 VR 7 LD 8 TR+ CNS2B C1 47/25 C R3 22K C49 47/25 CNP1 LASER DRIVER C4 0.001 C R6 22K R5 8.2K R9 3.3 VCC VREF E A B R4 F 8.2K Q1 KTA1266 GR 7 6 5 4 3 2 1 R2 8.2K 7 6 5 4 3 2 1 C2 0.01 7 6 5 4 3 2 1 R7 47 R1 8.2K 7 6 5 4 3 2 1 CNS1A VCC VREF E A B F C B CNS1B CD SIGNAL F – + – + + – + – + – C41 100/10 G H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 20 SCHEMATIC DIAGRAM (1/10) – 20 – 5 6 VCC4 M+ M– SP– VCC3 SP+ SPO VCC2 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 L CD-M4000W/CP-M4000 3 C34 100P C32 100P R38 R37 R36 R35 R34 R33 R32 C30 100P 2 R31 1K C13 0.022 11 R28 2.2K 60 DATA 59 DATACK 58 10 57 56 55 54 XL1 53 33.8688 MHz 52 51 50 R43 49 220 48 47 R22 46 100 45 ZD1 DZ3.3BSB 44 C24 43 C16 10/50 42 330/6.3 R25 LVDD 41 2.2K C23 C44 C26 0.001 10/50 0.0015 R24 R27 2.2K 10K C25 0.0015 C14 100/10 SBCK/FG DEFECT V/*P FSEQ MONI1 MONI2 MONI3 MONI4 MONI5 VSS VDD DOUT TEST R18 1K R20 10K 1 12 C51 0.022 C42 0.01 R-CH AGND L-CH DGND +5V 1 2 3 4 5 +5V 6 CNS11 FROM MAIN PWB P23 12-C C48 0.022 Q2 KTC3203 Y R47 100 R80 3.3 (1/4W) Fusible C18 100/10 R45 470 D1 DS1SS133 D2 DS1SS133 CNS703 FROM DISPLAY PWB P25 12-A CNP7 R26 10K 9 R46 470 1 2 3 4 5 6 7 8 9 CNP8 CONSTANT VOLTAGE 3 CONT2 CONT3 VSS VDD5 DRF VRES VWRQ DO DI CL CE FR VVDD PCKIST VVSS PDO2 PDO1 R14 1K R15 1K R16 1K R17 1K TO FD FO+ SLCO SLCIST LRSY EFMIN ASDFIN RF 5 8 ASDACK RFVDD 7 ASLRCK RSVSS 16MOUT FIN1 A EFLG FIN2 B C2F IC1 TIN1 E XVSS TIN2 F LC78645E VREF CD SERVO FSX/16MIN XIN REF1 XOUT FE TEC XVDD RVDD TE RCHO RFMON 6 RVSS JITTC LVSS ADAVDD LCHO ADAVSS TD0 FD0 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 SPDO SLDO GPDAC CONT4 CONT5 R13 1K 2 1 R29 2.2K 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 1 2 3 4 C8 5 047 6 7 TP1 8 9 10 C10 11 10/50 12 13 C11 0.22/50 14 15 4 16 17 P 18 19 20 WRQ DRF CE DO DI CL CD RES CLAMP SW O/C, DISC NO L1 0.82µH LDD R42 LDS 1.2K R11 10K C5 47(ML) 4 R41 12K C37 0.1 R40 680 C36 2.2/50 C35 R39 0.047 680 (ML) C28 100P C27 0.022 1K 1K 1K 1K 1K 1K 1K R23 220 C33 100P ZD2 DZ3.9BSB 1 R30 8.2K Q3 KRC102 M 39 40 41 42 LD_M+ LD_M– R19 15K VCC4 M+ BI4 2 3 R49 1 CNP4 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 CNS4 SW1 OPEN/CLOSE SW2 CLAMP SW3 DISC NOMBER M M3 CD LOADING MOTOR CD LOADING MOTOR PWB-E • The numbers 1 to 12 are waveform numbers shown in page 40. 7 8 9 10 Figure 21 SCHEMATIC DIAGRAM (2/10) – 21 – 11 12 CD-M4000W/CP-M4000 +B 1 DI C606 100/16 2 CLK CE CCB 3 VSS C609 0.22(ML) 4 VREF + – INTERFACE LOUT ROUT + – Q605 KTC3199 GR R622 Q606 2.2K KTC3199 GR LVL-CTRL 4 +B 5 R611 1.5K R613 220 R615 2.2K C615 0.001 C616 0.001 R616 2.2K R614 220 C105 180P 0V R105 3.3K 0.7V 0V R103 2.2K Q103 2SC1845 F 0V 0V 2 3 R171 1K 5 6 + – R874 100K 16 – + 56K Hich=CHROME 56K + – 8 9 C145 22/50 C146 220/10 R146 10K C142 47/25 C132 270P 7 17 C115 100/25 15 14 10 11 12 C127 0.022 R137 6.8K C117 C119 C121 0.033 560P 1/50 R131 12K C141 47/25 R145 10K R111 15K G R158 220 13 C133 22/25 R173 R121 100K 1K Q103~Q108: SWITCHING 18 R140 1.5K R142 100 C136 0.022 C140 0.0033 R134 68K R138 6.8K 19 IC101 AN7345K 4 C113 330P R117 1K R119 56 R136 4.7K R126 5.6K 20 Q12 Q124 SWITCHING 2SA1015 GR 11.7V 1 L 0V 21 – + 112K Hich=T1 + 112K R15 220 R167 47K BI102 Q105 0V 2SC1845 F 0.7V C865 47/25 R166 22K T2_L2 7 22 – R169 1K C111 330P T2_L1 2 C154 0.047 6 23 C134 22/25 Vcc 6 6 8 3 0V Q121 0V KTC3199 GR GND 6 T2_R1 C122 1/50 C114 330P 0V 0V R122 100K Q122 KTC3199 GR ALC RIPPLE 5 Q106 2SC1845 F R118 1K C112 330P R153 10K 0.7V R154 10K ALC Nor/CrO2 5 A_GND R867 100K 5 REC_R R141 100 5 0V T2_R2 1 D862 DS1SS133 C135 0.022 C139 0.0033 4 C118 C120 0.033 560P R120 56 C116 100/25 R170 24 1K 0V C131 270P R139 1.5K 0.7V 0V 0.7V R135 4.7K M_GND 0V C128 3.3/50 ERASE R868 5.6K Q111 KRC104 M L R108 47K R 3.4V Q104 R104 2.2K R106 3.3K C153 100/16 3 R 0V 2SC1845 F 0.7V R873 1K R156 220K R125 5.6K C123 0.0022 C106 180P 3 1 0V C107 560P 3 4 0V C108 560P 1 3 2 R101 1K C101 560P 4 3.4V R102 1K Q108 KTC3199 GR 3 R155 150 Q107 KTC3199 GR 2 T1_L Q110 KRC104 M 0V A_GND 3 7 D861 DS1SS133 +B R124 3.9K 9.3V R110 4.7K 2 0.001(ML) 2 Q109 KTA1266 GR C866 0.001 IC860 KIA4558P OPE AMP. R878 22K R123 3.9K R112 15K R879 22K C124 0.0022 R132 12K R114 R115 10K 4.7K 8.6V R109 4.7K 1 CNS102 TAPE 2 RECORD/ PLAYBACK HEAD R113 10K R107 47K T1_R CNP101 1 ERASE HEAD L-CH 9.3V C102 560P CNS101 R866 330 C859 D863 DS1SS133 0V M_GND(TAPE) E Q109~Q111: SWITCHING Q863 KTC3199 GR R853 22K VOLTAGE REGULATOR Q852 KIA7805 AP 1 3 R854 2 10K Q862 KTC3199 GR ZD851 DZ3.9BSB A_+10V VOLTAGE C856 REGULATOR 100P Q851 KIA7810 AP 1 3 2 C855 0.1(ML) C852 0.047(ML) R852 22K R174 1K C850 2200/35 R856 680 D_GND 4 C630 1/50 R624 4.7K R869 5.6K Q850 VOLTAGE KTC2026 REGULATOR +B R855 3.3 A_GND (CD) 3 13 C863 22/50 R875 100K +B A_GND(MIC) R-CH 14 C62 1/5 C628 1/50 R1 CD C864 22/50 SW+5V BASE CHASSIS F TUNER L1 LVL-CTRL R871 10K Q864 KRC102 M R870 3 2.2K 2 1 Q865 KTC3199 GR C867 1/50 RL LG1 2 15 R2 R880 10K SP_DET A_GND (A_PRO) C860 2200/35 GND 2 16 R3 DECK L2 SP_RLY +B 2 L3 C622 10/50 C624 1/50 17 M_GND(MTR) CNS901 1 R4 R619 22K C617 2.2/50 A_GND (MUTE) –B R620 22K R172 1K 13 +B C618 22/50 –15V 9 12 1 RSEL0 AUX C620 1/50 – + 8 TAPE 1 PLAYBACK HEAD LSEL0 L4 RTRE 18 –20dBATT S_MUTE CD+B M_+12V 11 L-CH RIN IC601 – + 7 10 R-CH LTRE LIN C6 0. (M GND(REG) 6 D Q603 Q604 KTC3199 GR KTC3199 GR C636 0.001 R-CH 3 C R610 330 A_GND 2 FROM POWER PWB P26 2-G C635 0.001 L-CH 1 CNP901 R621 2.2K R612 1.5K B R607 10K + – R609 330 Q605,Q606: SYSTEM MUTE 19 C610 0.22(ML) RBASS + – C613 10/50 + – R605 LBASS 3.9K 6 C611 C619 0.0015 1/50 7 C621 10/50 8 C623 1/50 9 C625 1/50 10 C627 1/50 11 R617 4.7K 12 C642 C629 0.0033 1/50 21 20 5 C602 22/25 22 + – C607 0.22(ML) 24 VDD 23 + – IC601 LC75341 AUDIO PROCESSOR A 0.03 IC101: PLAYBACK/TRACKING/SPIN/SLED DRIVER H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 22 SCHEMATIC DIAGRAM (3/10) – 22 – 5 6 CD-M4000W/CP-M4000 CLK 24 VDD 23 VREF ROUT C602 22/25 22 C614 R608 10/50 10K R606 C608 3.9K 0.22 (ML) C612 C620 0.0015 1/50 21 C610 0.22(ML) 20 RBASS 19 RIN RSEL0 R4 RTRE 18 C622 10/50 C624 1/50 17 16 R3 15 R2 14 MAIN PWB-A(1/2) FM SIGNAL PLAYBACK SIGNAL RECORD SIGNAL CD SIGNAL VIDEO SIGNAL MIC SIGNAL +B R633 39K R631 8.2K C631 390P R632 8.2K C632 390P L-CH JK601 VIDEO/AUX R634 39K R-CH CHASSIS C626 1/50 C641 0.0033 C628 1/50 R618 4.7K R1 13 BI11 R623 4.7K C630 1/50 –20dBATT S_MUTE +B R-CH A_GND 1 1 2 2 L-CH CD_GND 3 3 4 4 5 5 M_+5V A_+5/10V D864 DS1N404S TUN_R GND(A_GND) –B R866 330 C866 0.001 – + 1 D862 DS1SS133 8 3 CLK CD_GND 4 R873 1K DI 6 2 100K C863 22/50 R875 100K C861 0.022 R867 100K CNS11 7 8 9 5 CE +B R865 100 – + 7 61 1SS133 5 6 6 DO R625 1K R626 1K R627 1K IC860 KIA4558P PE AMP. TUN_L R861 68K 80 K D_GND A_+10V +B –B TO TUNER SECTION P28 1-G 2 3 4 6 1 –B SW601 SPAN SELECTOR R863 33K C865 47/25 CNP7 TO CD SERVO PWB P21 12-C +B 9 kHz/50 kHz 10 kHz/100 kHz +B CNS602 REC_R IN(L) R638 470K OUT(L) REC_L GND(A) R153 10K 0.7V Q121 0V KTC3199 GR +10 V(A) +B 0V R157 220K IN(R) R637 470K OUT(R) DATA Q121,Q122: MUTING CLK 1 2 2 3 3 4 4 5 5 CNPK1 6 6 7 7 TO MIC PWB P29 12-C 8 8 9 9 10 10 BI602 BIAS 0V CNP601 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 A_+10V KO LATCH MIC IN SPAN SP_RLY SP_DET SW+5V –20dB ATT –15V M+12V A_GND REC/PLAY T_T1 T2 T_BIAS D_GND C152 47/25 SPA_SIG Q128 KTC3203 Y R167 47K C151 0.039(ML) L104 330µH C150 0.0082 BIAS OSC R168 4.7 0V C154 0.047 R166 22K R145 10K 0V 0V Q126 KRC104 M S_MUTE 3 11.6V C141 7/25 C605 4.7/50 1 0V 2 DO R160 82 R164 4.7K DI 12 CLK 11 CE 10 R162 47K 11.6V 13 +B 0V 14 GND 15 Vcc R158 220 Q124 SWITCHING 2SA1015 GR 11.7V +B ALC RIPPLE C145 22/50 C146 220/10 MIC IN ALC Nor/CrO2 47/25 R146 10K LATCH 1 20 21 21 1 FC701 CNP701 7 8 9 TO DISPLAY SECTION P25 12-D 10 Figure 23 SCHEMATIC DIAGRAM (4/10) – 23 – 11 12 CD-M4000W/CP-M4000 DISPLAY PWB-B1 A P04 P03 P01 G11 16 81 82 83 84 85 86 87 88 89 90 P3 P2 P02 P05 24 23 P06 25 P07 26 P08 28 27 P09 29 P10 P11 P12 P13 36 35 34 33 32 R716 100K Q703 KTC3199 GR C714 47/50 R724 33 R719 1K R705 1K 80 P10 G11 C715 22/50 P1 Q702 KTC3199 GR R702 1K 31 30 P4 38 37 P14 P15 P16 P17 P18 40 39 P5 41 P6 42 P19 P20 P21 P22 43 P9 Q701 KTC3199 GR 44 P7 B R704 100K 57 56 P8 R701 100K F 58 F F FL701 FL DISPLAY 79 VLOAD R727 47K R728 47K 78 P11 77 P12 76 P13 75 P14 74 P15 73 P16 C 72 P17 DT701 DS1SS133 71 P18 70 P19/DIST0 R794 1K IX0 SY MICRO 69 P20/DIST1 68 P21/DIST2 DT703 DS1SS133 67 P22/DIST3 66 NO USE 65 HSS_DO 64 HSS_DI 63 HSS_STB 62 HSS_ACK 61 NO USE/MPEG_POW D 60 NO USE R793 10K R743 1K R744 1K R745 1K 56 FPB (R-REC) 55 FPA (F-REC) 2.2/50 100K CS710 RS713 IC703 KIA4558P OPE AMP. 0.022 T_SOL B SMUTE R758 1K T_SOL A 470 R756 T_MOTOR 470K 41 R755 TIMER LED 42 2.2K 43 R754 44 1.8K 45 +B R717 10K R714 10K R718 10K R720 10K R749 10K R746 10K R721 4.7K 7 ZD701 MTZJ6.2C 6 R713 10K CS708 8 270 1 5 0.022 4 3 CS713 0.022 RS720 180K F 2 RS708 RS719 15K 46 R725 10K RS716 1M RS714 2.2M CS705 0.022 RS709 150K 47 D704 DS1SS133 CS709 RS717 470K CS712 0.0068 48 R753 50 VDD 51 D701 DS1SS133 CS711 0.0068 RS718 56K 49 T1 RUN 52 RS711 100K SP_RLY 53 CD CLAMP SW D703 DS1SS133 CS706 2.2/50 51 T2 RUN 54 PLAY SW_B LED722 CS704 0.0027 1K SP_DET 7 +B 1K R742 1K 6 RS715 100K CS707 2.2/50 R741 58 LCK 0 57 MIC SW 1K 8 1K R751 5 R739 1K RS705 12K CS703 0.0027 1K 1K R748 E 1 RS706 220K RS707 390K RS703 68K 3 -B D702 DS1SS133 4 2 RS704 220K RS701 33K RS710 270 RS712 820K CS702 270P R740 R738 R747 CS701 270P RS702 10K 59 DISTOUT/SW OUT R792 10K +B IC704 KIA4558P OPE AMP. +B -B -B +B TAPE MECHANISM PWB-D Q704,Q705: SOLENOID DRIVER 0V CASSETTE FC702 SOLENOID G F. PLAY SOLENOID + TAPE MOTOR M - PH 9 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 PLAY 2 1 1 1 10V R737 10K Q705 KTA1273 Y CNP702 C 0 R_REC 10V T1 RUN R736 10K Q704 KTA1273 Y F_REC SOLA SOLB R752 10K +MTR Q708 KTA1273 Y MOTOR DRIVER T2 RUN GND +B 10V C719 47/25 D712 DS1SS133 D713 DS1SS133 T2 PLAY H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 24 SCHEMATIC DIAGRAM (5/10) – 24 – 5 6 CD-M4000W/CP-M4000 TO CD SERVO PWB P21 12-B C722 47/50 G9 G8 1 R773 2 DSA_STB 3 T-BIAS 4 T-T1/T2 5 REC/PLAY 6 RES OUT 7 DRF 8 WRQ 9 1K 7 8 9 1 2 3 4 5 6 7 8 9 CNS703 C725 0.022 CNS705 VF1 -VF R775 R776 RESET 10 1K VF2 1K P_IN R777 1K R778 1K R779 1K R780 1K R781 1K X2 11 X1 12 XL701 4.1943 MHz A_+10 V C723 15P MIC_IN SPAN SP_RLY XT2 14 SPN 15 R782 SP DET 1K SW +5 V VDD 16 CD CLK 17 CD DI 18 CD DO 19 CD CE 20 CE 21 CLK 22 DI 23 R783 -20dB ATT 1K R784 1K R785 1K R786 1K A_GND R787 1K SPA_SIG R788 1K R789 1K R790 1K DSA_ACK 27 2 DATA R770 1K R771 1K R772 1K R769 1K C727 470P R708 10K LED702 10K 10K R706 1K 1K 31 R768 R766 32 R767 33 LED701 R700 10K PLAY R703 SPEANA0 30 RL701 1K STOP SPEANA1 29 1K 34 1K 1 VSS SPEANA2 28 AVDD AVREF P-IN 35 1K JOG 0 JOG 1 36 R762 1K 37 R761 REMOCON 1K 1K R759 38 R760 SMUTE VSS 39 40 1K 41 R758 T_SOL A T_SOL B 470 42 R756 T_MOTOR TIMER LED 2.2K 470K 43 R755 1.8K R753 44 R754 45 KEY 2 31 KEY 1 32 KEY 0 33 S_MUTE IC702 BU2092F INPUT/OUTPUT EXPANDER C701 R791 M_+12 V +B AVSS 25 DSA_DATA 26 -15 V -B DO 24 51 T2 RUN 3 2 2 1 1 FC701 21 CNP701 +B C724 18P XVPP/IC 13 4 3 BI705 KARAOKE LATCH IC701 IX0460AW SYSTEM MICROCOMPUTER 4 RL702 1K REW_PLAY LED705 RL705 1K 4 LCK Q10 15 T_BIAS D_GND C702 OE 17 Q11 16 T_T1 T2 47/25 +B VDD 18 3 CLOCK REC/PLAY 0.022 DO DI CLK 5 Q0 RL704 Q9 14 1K 6 Q1 1K 1K LED708 8 Q3 Q8 13 RL703 RL708 Q7 12 RL707 Q6 11 1K LED707 9 Q4 Q5 10 RL706 1K 7 Q2 CE 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 CNP704 3 3 3 2 2 2 1 1 1 LED706 +B +B +B CNS704 +B +B D721 DS1SS133 +B +B 3 -B +B D718 DS1SS133 1 C728 0.01 +B +B JOG701 JOG VOLUME B C720 0.001 +B RD25 680 RD26 820 SW722 CD SW723 TAPE RD13 680 RD14 820 RD27 1K RD28 1.5K RD29 2.2K RD30 2.7K RD31 3.9K SW725 MEMORY SET SW726 FAST REWIND SW727 FAST FORWARD SW728 PLAY RD32 5.6K RD33 10K 1 2 3 RD34 15K RD35 33K D722 DS1SS133 2 RX701 REMOTE SENSOR C729 3.3/50 R799 100 Q709 KRC102 M RESET C733 47/25 R796 47K C732 0.022 R795 10K D720 DS1SS133 +B R763 10K R764 10K R765 10K R797 100K R757 10K +B D723 DS1SS133 R721 4.7K +B 5 V BACK UP RD36 100K A C721 0.001 SW724 TUNING DOWN SW729 STOP SW730 REVERSE PLAY SW731 REC/ PAUSE SW732 TUNING UP SW733 VIDEO SW734 TUNER RD15 180K +B SW714 DIMMER RD01 680 SW701 ON/ STAND-BY 7 8 SW715 SW716 MONSTER EQUALIZER BASS RD02 820 SW702 CLOCK SW717 REVERSE MODE RD04 1.5K RD03 1K RD05 2.2K RD06 2.7K RD07 3.9K RD08 5.6K RD09 10K SW703 TIMER SW709 DISC 1 9 RD10 18K SW710 DISC 2 10 Figure 25 SCHEMATIC DIAGRAM (6/10) – 25 – TO MAIN PWB P23 10-H G10 VDD -20dBATT 6 CNP905 G11 98 5 TO POWER PWB P26 4-G P1 97 4 CNP601 P3 P2 96 3 O/C SW DISC NO WS P4 99 100 95 G1 93 94 G2 92 G3 91 G4 90 G5 89 G6 88 G7 87 2 BI703 C726 220/10 86 1 DRF 1 CD CE 2 WRQ(DSP) 3 CD DI F 6 CD DO F 7 CD CLK F 8 RES OUT G01 9 CLAMP SW G02 10 G03 12 11 G04 G05 14 13 G06 15 G07 16 G08 G10 24 23 G09 G11 25 P01 P03 26 P02 P04 CNP8 RD11 33K SW711 DISC 3 11 RD12 100K SW712 DISC SKIP SW713 OPEN/CLOSE 12 LED704 LED703 BI704 MONSTER BASS PWB-B3 CD-M4000W/CP-M4000 7 6 5 C957 100/100 R951 3.9K D908 DS1SS133 D907 DS1SS133 R921 1.8K R935 47K R919 1.5K VL+ R917 0.1 (3W) R906 1K R911 100 (1/4W) Fusible R910 56K C902 3300/71 VH– C918 0.22/50 C917 0.22/50 C904 4700/35 VL– D902 DS1N404S SP DET C958 0.1/50 C901 3300/71 R905 1K R952 3.9K R936 47K Q902 KTC3199 GR R922 1.8K Q901 KTC3199 GR C940 220P C921 100/50 R920 1.5K D909 DS1SS133 ZD901 DZ12BSB C903 4700/35 C922 100/50 C919 100/100 C924 0.022 (ML) ZD902 DZ12BSB Q904 KTC3199 GR R918 0.1(3W) C R909 56K 1 Q903 KTC3199 C923 0.022 (ML) C939 220P 2 3 VH+ R904 56K C920 100/100 4 VH+ 8 9 R915 0.22/3W 10 IC901 STK41203 POWER AMP R916 0.22/3W 11 R902 1K C905 0.1/50 R908 390 12 C912 47P C913 47P R944 C914 47P 33K C916 47/50 R907 390 13 R912 100 (1/4W) Fusible R901 1K R903 56K C915 47/50 B 14 R914 0.22/3W 15 R913 0.22/3W 16 C956 100/100 17 VL+ + – 18 C911 47P VL– – VH– + A D901 DS1N404S R943 680 (2W) D ZD951 DZ13BSB C952 220/25 +B C946 100/10 R949 470K R950 1.2K CNS903 D913 DS1SS133 +B +B E BI903 BI902 CD+B 1 M_GND 2 +B 3 GND 4 +B F CNS902 1 1 2 2 3 3 4 4 CNP902 CD+B M_GND 8 8 8 7 6 5 4 7 6 5 4 7 6 5 4 3 2 1 3 2 1 3 2 1 CNP903 D809 TS6B04G R807 47K +B ZD804 DZ110BSB GND D813 DS1N404S +5V SP_DET SP_RLY M_GND –15V M_+12V CD+B GND D814 DS1N404S +B LVL_CTRL R CH A_GND L CH +B CNS705 1 2 3 4 5 6 7 8 VF2 –VF VF1 R806 220K R803 12K CNP905 FROM DISPLAY PWB P25 12-B P_IN 1 2 3 4 9 10 11 12 13 CNP901 C819 47/50 C820 100/35 C818 47/50 R819 47K R805 10 CNS901 G Q8 ZD802 KTA12 DZ6.2BSA FROM MAIN PWB P22 1-C R811 47 R810 47 POWER PWB-D1 H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 26 SCHEMATIC DIAGRAM (7/10) – 26 – 5 6 CD-M4000W/CP-M4000 AMP. PWB-D2 C937 0.1 C930 0.1 (ML) R930 56K D911 DS1SS133 R932 10 (1/2W) 2 1 3 R934 2.2K C928 0.1 (ML) C936 0.1 R948 3.9 (1/2W) CHASIS GND LG901 CHASIS GND R933 2.2K CNP904 +B L902 0.29µH D912 DS1SS133 R942 560 (2W) L-CH C938 0.1 R941 560 (2W) R937 15K C943 47/50 Q907 KTC3203 Y FAN MOTOR DRIVER R939 2.2K 1 2 2 R940 220 (1/2W) R938 68K 1 HP_RLY D901 DS1N404S 1 M_+12V HP_R-CH + – CNS904 M901 FAN MOTOR 1 2 3 HP_GND HP_L-CH M HEADPHONES PWB-B2 FW902 R926 10 (1/2W) R954 10 (1/2W) C934 0.022 (ML) C932 0.022 (ML) R946 3.9 (1/2W) Q905 KRC107 M R928 10 (1/2W) R931 10 (1/2W) SP RELAY ON–OFF R923 56K R953 10 (1/2W) + C929 0.1 (ML) – C925 47/50 GND SO901 SPEAKER TERMINAL GND C927 0.1 (ML) R929 56K R927 10 (1/2W) R-CH – R925 10 (1/2W) D909 DS1SS133 Q904 KTC3199 GR R947 3.9 (1/2W) C935 0.1 C931 0.022 (ML) C933 0.022 (ML) RL901 L901 0.29µH Q903 KTC3199 GR R945 3.9 (1/2W) + FM SIGNAL R 4 5 5 JK670 HEADPHONES L CNP705 +B 03 8 CNP903 T801 POWER TRANSFORMER 7 6 5 4 3 2 1 F802 T2.5A L 250V C810 0.22 C812 0.22(ML) D809 TS6B04GM F804 T5A L 250V C809 0.22 C811 0.22(ML) D810 D10XB60F F805 T5A L 250V D811 DS1N404S D814 D812 DS1N404S DS1N404S C814 0.22 C818 47/50 R802 2.2K R819 47K ZD801 DZ30BSB C816 100/50 C819 47/50 R805 10 F806 T2A L 250V C813 0.22 D815 DS1N404S F807 T2A L 250V C815 100/50 110V 127V 220V 230-240V D813 DS1N404S F803 T2.5A L 250V D816 DS1N404S C817 220/63 D818 DS1N404S T.F Q803 ZD802 KTA1274 Y DZ6.2BSA SW801 VOLTAGE SELECTOR F801 T5A L 250V 8 9 10 Figure 27 SCHEMATIC DIAGRAM (8/10) – 27 – LG801 LG802 TRANSFORMER PWB-D3 7 AC POWER SUPPLY CORD AC 110/127/220/ 230-240 V, 50/60Hz 11 12 CD-M4000W/CP-M4000 AM LOOP ANTENNA SO301 FM ANTENNA TERMINAL A 2 1 CNP301 2 1 R311 R314 22 C309 0.001 100K VD302 KDV147B R313 33K C317 0.001 B IC301 TA7358AP 3 FM FRONT END 4 C323 0.022 5 +B 6 C312 0.022 +B R322 680 Q302 KTC3194 Y 7 T301 FM OSC. R325 47K OSC BUFF T302 C324 8.2P(UJ) FM IF C318 100P 1 2 CF303 R316 4.7K AM SIGNAL 9 C306 0.022 C335 560P C334 22P (UJ) C307 10/16 VD303 SVC211C T303 R323 68K C313 22P R309 (CH) 10K 3 FM SIGNAL AM BAND COVERAGE fL 8 C311 R302 10 18P AM OSC. T306 R327 33 C C305 4.7P (CH) C310 15P (CH) 2 1 C330 15P(UJ) VD301 SVC348S +B C332 0.022 C331 0.047 R336 10K TP301 AM TRACKING C315 0.0047 C316 0.022 C303 10P(CH) C304 0.01 0.001 FM RF DS1SS133 4.7P(CH) L312 C338 C308 1 2 BF301 B.P.F. 3 AM ANT. DS1SS133 DS1SS133 +B D305 D301 C314 0.0047 D302 MAIN PWB-A (2/2) +B +B +B C382 15P (CH) C381 12P (CH) R374 1K R373 1K R372 1K R378 1K 1 X IN X OUT 22 VSS 21 2 AOUT 20 3 CE 4 DI 5 CL 6 DO C397 0.022 R381 10K R380 1.5K AIN 19 PD 18 R368 22K C351 0.022 C352 10/16 C350 0.022 AM IF 0.022 1 2 L351 100µH CF352 R377 47K R393 1K 0.022 C354 0.022 +B 3 4 0.022 C395 2 C363 0.022 C364 C365 2.2/50 0.022 C366 0.001 R350 2.7K R353 270 C356 0.001 C357 2.2/50 R355 3.3K 9 VCC 10 IF OUT 11 PHASE MPX VCO 17 X351 456 kHz C368 1/50 TP302 MPX IN 16 R356 1K C369 27P(UJ) R-CH OUT 15 C374 L-CH OUT 14 12 PHASE MO/ST 13 C358 (FM/AM) 1/50 IC303 LA1832S FM IF DET./FM MPX./AM IF R357 470K 0.018 C373 0.018 C372 1/50 R362 3.3K C371 1/50 R361 3.3K R364 6.8K +B CE DI C396 TO MAIN SECTION P22 12-C 1 R391 270 R383 5.6K +B L352 100µH R392 270 0.022 C367 1/50 100/10 C391 47/16 Q360 KTA1266 GR CONSTANT VOLTAGE R385 5.6K 3.3/50 C361 7 STEREO C370 1/50 R359 1.8K R384 5.6K G C355 22P C362 +B VSM 20 AM LOW CUT 19 4 AM IF IN FM/AM OUT 18 5 GND 6 SD C398 100/10 R387 5.6K R388 3.9K F AM OSC OUT 24 FM IF IN AM OSC IN 23 2 AM MIX OUT FM AFC 22 3 REG AM RF IN 21 8 FM DET C399 0.022 R395 47K R352 1K 3 C353 CF351 R360 4.7K R358 3.9K R365 10K R351 5.6K T351 C380 C392 10/16 0.001 C387 +B 1 C394 47/16 C393 1/50 R379 7 FM/AM VDD 17 2.2K FM IN 16 8 IF CONT 15 AM IN C385 9 FM/AM 14 0.01 10 MO/ST SD 13 IF IN 12 11 ST IND R376 C386 1K 330P E C342 0.022 R382 150 R375 470 IC302 IC302 LC72131 PLL(TUNER) D X352 ZD351 DZ5.1BSB R363 6.8K CLK DO 5 D_GND C388 0.001 6 7 TUN_R A_GND 8 9 TUN_L H • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. 1 2 3 4 Figure 28 SCHEMATIC DIAGRAM (9/10) – 28 – 5 6 CD-M4000W/CP-M4000 MIC PWB-H MIC SIGNAL RK4 10K RK5 1K CK6 0.1 CK7 0.47 CK8 4.7/50 CK9 2.2/50 5.6K JK1 MIC CK2 0.47 CK10 RK8 RK7 1K VRK1 CK11 20K(B) MIC CK13 VOLUME 0.0047 CK14 RK11 1K CLOCK 41 RK10 1K 3 VACL LATCH 40 RK9 1K 4 MIC1 IN PS2 39 5 ALC1 PS1 38 6 MIC1NF IN VCF IL 37 7 MIC1 OUT L OUT 36 8 MIC1VOL IN R OUT 35 47P CK34 47P CK33 0.15 2.2/50 CK30 2.2/50 RK43 18K 0.1 12 MIC2 OUT L IN 31 CK25 2.2/50 0.1 13 MIC2VOL IN VOL IN 30 CK24 2.2/50 15 LPF1 IN1 LPF2IN2 28 16 LPF2 IN2 LPF2IN1 27 2.2/50 DACONT 24 CK16 0.22 20 ADCONT VCC 23 CK17 220/10 21 REF GND 22 RK39 1k CNPK1 MIC IN(L) MIC OUT(L) RK37 390 ICK2 KIA4558P OPE AMP. A_GND RK36 390 A_+10V MIC IN(R) RK40 1k MIC OUT(R) DATA CK23 0.001 CK22 0.0047 MIC LATCH CK21 0.068 MIC IN CK20 0.22 CLOCK QK1 KTC3203 Y 18 AD INTOUT DAINTIN 25 19 AD INTIN 4 CK47 220P R IN 32 0.068 6 CK31 CK29 11 MIC2NF IN LPF2OUT 29 CK45 2.2/50 7 KEYCONIN 33 CK12 MICOUT 2.2/50 14 ICK2 5 RK44 6.8K CK26 0.001 3 CK49 100P CK52 1/50 47P CK46 2.2/50 1 CK51 1/50 RK49 10K 8 2 RK45 6.8K 9 MIC2 IN SOURCEOUT 34 10 ALC2 17 LPF1 OUT DAINTOUT 26 CK15 CK35 RK48 10K RK50 10K DATA 42 2 MCLKCONT 1 MICSW CK50 100P 10K 0.01 18K 10K CK1 220P RK46 RK41 0.001 ICK1 M65856SP MIC AMP. RK1 10K CK53 47/50 RK42 CHASSIS GND DK2 DS1SS133 CK3 56K RK3 56K RK2 PINK1 DK1 DS1SS133 CK48 RK47 8.2K CK41 100/16 RK14 100 RK13 1.2K CK18 100/16 CK42 0.022 CK19 0.022 RK38 100 RK15 100 CK44 47/25 RK12 100 CK43 47/25 1 2 3 4 5 6 7 8 9 10 CK72 100/16 ZDK1 MTZJ5.6B • NOTES ON SCHEMATIC DIAGRAM can be found on page 39. Figure 29 SCHEMATIC DIAGRAM (10/10) MIC PWB-H CK24 CK26 CK25 CK29 CK30 CK3 DK2 DK1 CK21 CK22 CK19 CK42 CK31 CK20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 37 38 39 40 41 42 CK18 JK1 MIC CK33 CK34 CK35 ICK1 CK23 CK17 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 RK11 RK10 RK9 CK47 RK47 10 Figure 29 WIRING SIDE OF P.W.BOARD (1/9) – 29 – ZDK1 RK14 RK15 CK52 CK41 RK44 RK49 CK49 RK43 6 7 8 CK45 3 2 1 RK41 5 RK12 RK13 RK1 CK2 CK43 RK7 RK8 CK44 RK5 RK4 CK1 CK53 CK46 4 RK42 CK10 RK45 CK50 CK48 RK46 C E ICK2 CK51 9 CK6 B RK50 RK48 8 QK1 CK9 CK11 VRK1 MIC VOLUME CK7 CK14 CK13 RK2 RK3 CK8 CK15 CK12 CK16 7 PINK1 RK40 RK38 RK36 RK37 CK72 CNPK1 10 9 8 7 6 5 4 3 2 1 CNS602 FROM MAIN PWB P30 6-A RK39 11 12 CNS602 FROM MAIN PWB P23 12-E CD-M4000W/CP-M4000 TO MIC PWB P29 12-G CNP7 CNPK1 CNS602 CNS11 1 2 3 4 5 6 RD WH GY WH GY WH MAIN PWB-A 1 2 3 4 5 6 7 8 9 10 RD GY WH GY WH GY WH GY WH GY A TO CD SERVO PWB P36 5-A B R373 R378 R374 R379 C397 L351 R375 C386 C391 C396 R377 11 13 17 19 21 12 14 16 18 20 C363 R627 R626 SW601 SPAN SELECTOR R606 9 kHz/50 kHz R364 R607 R634 JK601 VIDEO/AUX IN L-CH C616 R619 R-CH C632 R632 R616 R631 C631 R633 R613 Q603 E C B B C E Q604 B C E R614 G C614 E Q605 C R621 B C602 C608 C610 R620 C622 Q606 C606 R6 IC601 R611 C636 R622 C617 R615 C615 10 kHz/100 kHz F R608 C635 R363 R625 C612 VD301 C332 E C342 R336 C361 D302 D301 15 10 D305 CNP301 1 2 8 9 R351 D 6 7 CF352 R322 C315 GND 4 5 L312 FM ANTENNA TERMINAL 2 3 R391 R385 R395 B R380 C318 C385 R393 C C393 E R383 R382 T301 C307 Q360 L352 T351 3 ZD351 B C E C306 2 9 R327 1 8 C324 R302 C388 C398 VD303 7 C370 R314 IC301 C351 C311 6 C313 C310 CF351 C356 C352 5 R353 R309 C350 4 R355 C312 C305 C354 3 R365 C353 C357 C358 C304 T302 R352 2 CF303 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 C355 1 C309 IC303 C399 C308 C303 VD302 R311 C366 C314 24 23 22 21 20 19 18 17 16 15 14 13 BF301 1 2 3 R313 R316 X351 C316 R361 R358 C369 C317 C362 C371 C367 C334 C373 C323 R350 C374 R356 R323 R357 R362 C365 T303 C368 C330 C364 C372 C331 C335 T306 C338 C380 R325 Q302 SO301 1 2 R360 1 C395 R381 FM 75 OHMS AM LOOP ANTENNA C387 CNP601 R376 R384 C394 IC302 R359 22 21 20 19 18 17 16 15 14 13 12 C392 C R387 1 2 3 4 5 6 7 8 9 10 11 C382 C381 R368 R388 R372 R392 X352 C618 1 2 3 4 5 6 7 8 9 24 23 22 21 20 19 18 17 16 15 14 13 10 11 12 C641 C620 C611 C627 C642 R R612 R618 C623 C628 C630 C624 R623 C626 R610 R609 1 2 3 4 H TO 1 2 3 4 Figure 30 WIRING SIDE OF P.W.BOARD (2/9) – 30 – 5 6 CD-M4000W/CP-M4000 TO DISPLAY PWB P33 11-A CNP701 10 GY FC701 21 1 Q122 R156 B C E C146 R140 R158 R146 C142 R154 R153 C145 Q121 R145 B C E 13 15 17 19 21 Q865 B C E 12 Q864 14 3 2 1 16 18 20 R125 R131 C127 C115 C121 C119 R123 R870 C117 C867 C861 R866 C865 D864 1 5 R861 3 6 2 7 1 8 CNP101 IC860 R873 R880 R867 1 C101 C863 D862 R874 6 B C E R868 1 2 3 1 2 3 Q862 Q110 1 2 3 R155 R122 E C B R105 E C B R103 Q104 E C B BI102 7 WH BK PK BK WH YL BL CNS102 WH BK 1 2 PK 3 WH 4 YL 5 BL 6 1 R104 R112 E C B 1 C106 R108 C150 R115 R106 C154 R166 R167 Q106 R168 P37 11-F E C B Q128 L104 C153 C151 C152 R114 E R164 C Q109 R162 B R113 E C B R627 C118 Q103 7 6 5 4 C108 3 R107 2 Q111 R110 B C Q863 E C105 E C B C116 C120 R172 R124 R174 R120 Q105 R102 Q108 E C Q107 B C122 C114 R118 R109 R878 R879 R875 BI11 C864 R869 R169 R119 R173 R117 C102 C107 R101 C866 4 BI602 R121 R865 R863 10 9 8 7 6 5 C113 4 3 2 1 R171 C111 11 C605 8 10 D861 9 C123 R170 C112 6 7 R139 R137 C131 C128 R157 R871 R126 R136 R138 C132 R134 13 14 15 16 17 18 19 20 21 22 23 24 R111 4 5 12 11 10 IC101 2 3 C139 C133 R637 R638 C134 BI102 1 C136 C141 R141 R135 NP601 R132 C124 C140 R142 C135 3 2 1 TO TAPE 2 RECORD/PLAYBACK ERASE HEAD R160 Q124 Q126 P37 10-F FROM TAPE 1 PLAYBACK HEAD R625 1 2 3 1 R854 C613 C606 R605 2 3 B Q851 Q852 C856 611 C607 C855 R855 ZD851 C859 C621 E R856 D863 C619 C Q850 R853 C609 COLOR TABLE C852 C625 BR R852 C629 C627 642 R624 R617 C860 C850 C623 2 3 4 5 6 7 8 9 10 11 12 13 LG1 CNS901 BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK CNP901 TO AMP. PWB P35 12-E 7 8 9 10 Figure 31 WIRING SIDE OF P.W.BOARD (3/9) – 31 – 11 12 CD-M4000W/CP-M4000 DISPLAY PWB-B1 1 2 3 CNS703 R701 R704 R716 C722 Q701 Q703 B B B C C C E E E C714 1 R702 R705 R719 Q709 RX701 R781 3 2 1 4 BI705 C729 3 2 1 RS720 LED706 IC703 8 7 6 5 CS711 1 2 3 4 RS716 RS708 RD10 RD11 F CS705 RD12 R779 R780 R736 C721 RS715 C720 B C E B C E B Q708 RD14 C E SW7 EQU D713 D712 C719 RD15 LED708 CNP702 RD36 RD1 R737 JOG701 SW711 DISC 3 SW733 VIDEO R752 R795 R757 SW715 MONSTER BASS R782 R778 R773 R775 R776 R777 RS711 CS710 CS707 D704 LED707 SW710 DISC 2 RD08 CS713 RS717 RS713 RD09 RS710 RS719 RS701 RS702 RD07 CS706 3 2 1 CNP704 CS712 ZD701 E RS705 CS702 D701 SW709 DISC 1 RS703 CS703 CS701 1 3 5 7 9 2 4 6 8 SW712 DISC SKIP 1 9 FC702 G P37 9-A TO TAPE MECHANISM PWB MONSTER BASS PWB-B3 3 GL 2 GL 1 RD CNS704 3 BI704 1 LED704 LED703 H 1 2 3 R78 R78 R78 R78 R79 R77 R706 CS704 RS718 1 2 3 4 RS709 D702 R708 D722 D723 RS706 SW713 OPEN/ CLOSE D703 RS707 RS714 8 7 6 RS712 5 RS704 CS709 R703 C733 IC704 CS708 XL701 R799 1 D C723 C724 C728 D718 R797 C732 R724 C CNS705 4 RD 3 WH CNP905 2 BL TO POWR 1 WH PWB P34 3-G C725 R796 Q702 Q704 B CNP8 TO CD SERVO PWB P36 4-A 9 BI703 9 RD 8 GY 7 WH 6 GY 5 WH GY 4 3 WH 2 GY 1 WH 6 7 8 9 10 11 12 13 14 15 16 Q705 A 4 Figure 32 WIRING SIDE OF P.W.BOARD (4/9) – 32 – 5 6 RL R R CD-M4000W/CP-M4000 TO MAIN PWB P31 9-A CNP601 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 R727 R728 FL701 81 85 75 70 25 35 R721 R758 R790 R789 R788 R787 RD06 R740 R766 R700 LED722 R756 R755 R772 R771 R769 R768 C726 D720 R762 R767 RL704 RL703 R783 R784 R785 R786 R791 R770 R747 R748 R753 40 31 30 R751 50 20 SW701 ON/ STAND-BY R764 R763 R765 R759 R754 15 R743 51 55 45 R746 60 IC701 R720 R718 R714 R717 R713 R792 5 10 R749 1 D721 R793 65 R744 R745 R742 R741 R739 R738 95 R761 R760 725 CNP701 1 3 5 7 9 11 13 15 17 19 21 2 4 6 8 10 12 14 16 18 20 R794 DT703 DT701 90 100 C715 80 FC701 21 1 56 57 58 RD05 RD04 RD03 SW734 TUNER RD35 C701 C727 SW722 CD C702 R725 SW723 TAPE D36 D13 LED702 1 RL701 RL702 RL705 LED701 5 15 9 LED705 W716 QUALIZER SW732 TUNING UP SW729 STOP IC702 RD32 RD02 RD31 RD30 SW730 REVERSE PLAY RD29 SW727 FAST FORWARD SW717 REVERSE MODE SW731 REC/ PAUSE 7 SW702 CLOCK 10 RD01 SW728 PLAY RL706 RL707 RL708 SW714 DIMMER 18 8 SW726 FAST REWIND SW703 TIMER RD25 RD26 RD33 RD28 COLOR TABLE RD34 RD27 BR SW724 TUNING DOWN SW725 MEMORY SET 9 10 Figure 33 WIRING SIDE OF P.W.BOARD (5/9) – 33 – 11 BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 12 CD-M4000W/CP-M4000 TRANSFORMER PWB-D3 AC POWER SUPPLY CORD AC 110/127/220/ 230-240 V, 50/60 Hz A 230-240V 220V 110V 127V COLOR TABLE GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK LG801 LG802 110 V YELLOW 127 V YL 220 V ORANGE F803 T2.5A L 250 V RED OR 230-240 V C RD(R) F801 T5A L 250 V B BROWN F802 T2.5A L 250 V BR SW801 VOLTAGE SELECTOR T.F D T801 POWER TRANSFORMER POWER PWB-D1 E F806 T2A L 250 V CNP902 1 2 3 4 F804 T5A L 250 V F805 T5A L 250 V F807 T2A L 250 V C814 D814 D812 D811 C818 R803 ZD802 R811 R805 1 2 3 4 CNP905 ZD801 R810 F C813 ZD804 C820 R819 C819 CNS705 Q803 E C B R807 R806 D813 D815 D816 C815 C810 C811 D818 C812 C809 C816 R802 D810 C817 D809 1 2 3 4 5 6 7 8 CNP903 FROM DISPLAY PWB P32 1-C G HEADPHONES PWB-B2 5 CNP705 JK670 HEADPHONES H 1 1 2 3 4 Figure 34 WIRING SIDE OF P.W.BOARD (6/9) – 34 – 5 6 CD-M4000W/CP-M4000 SO901 SPEAKER TERMINAL L-CH R-CH AMP. PWB-D2 R948 LG901 Q907 B C E R947 R933 RL901 CNP904 2 1 C937 R946 R939 R938 C936 RD M901 FAN MOTOR BR D912 R937 R940 1 C943 2 CNS904 C935 R945 C931 C938 C932 Q905 1 2 3 C933 C934 C925 R930 R934 Q903 E C B D911 B C E R953 R954 R932 R931 Q904 R923 R929 C929 C927 L902 C930 C928 C957 C902 R926 R919 R920 C956 R918 Q902 ZD901 R952 R951 C901 ZD902 C922 R911 D902 C920 R912 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 R925 D909 R917 D907 Q901 D908 R916 C958 CNP901 1 2 3 4 5 6 7 8 9 10 11 12 13 R914 R915 R913 C940 CNS901 FROM MAIN PWB P31 7-H R935 R936 C912 R904 R902 R901 R903 C914 C919 R906 C916 R944 R927 C923 R921 B C E E C B C921 C903 C924 R922 IC901 D901 L901 R928 C913 C911 C905 C915 R905 C917 C939 C904 R908 R910 R907 R909 C918 CNS903 8 BI903 8 7 6 5 4 3 2 1 R949 R942 D913 R950 C952 1 ZD951 FW902 5 8 1 BI902 R943 1 4 1 2 3 4 7 R941 C946 9 CNS902 10 Figure 35 WIRING SIDE OF P.W.BOARD (7/9) – 35 – 11 12 CD-M4000W/CP-M4000 P32 1-B FROM DISPLAY PWB CNP703 CD SERVO PWB-C A P30 4-A FROM MAIN PWB CNS11 3 E C B R9 7 C1 C6 R32 R22 R33 70 75 80 1 R5 R2 5 45 IC1 C39 R6 R3 R44 C44 C12 R20 1 20 15 10 C9 5 C40 25 C10 30 35 1 2 Q3 D2 D1 CNP4 6 5 4 3 2 1 CNP3 6 5 4 3 2 1 4 R46 R45 42 C41 3 40 22 E 6 R18 R30 R17 IC2 9 20 21 C11 21 10 R24 R26 C25 C13 CT1 CT2 C23 30 15 25 R1 11 C26 41 40 C16 35 12 C48 R27 R25 C24 65 55 50 10 R4 R65 D R43 C14 C50 R49 5 C8 Q2 E L1 R12 CNP1 7 6 5 4 3 2 1 C XL1 61 60 R40 R39 B C C18 C30 R31 C34 C35 R29 C27 R28 R10 C5 R11 R42 R41 8 C36 ZD2 R13 R14 R15 R16 C2 R35 R34 C3 Q1 R80 R23 R47 ZD1 C4 C51 C28 C49 C37 B C32 8 7 6 5 4 3 2 CNP2 1 1 2 3 4 5 6 CNP7 C42 1 2 3 4 5 6 7 8 9 CNP8 C33 R38 R37 R36 C38 2 R19 1 CNS3A 654 321 WH GR WH GR WH RD PICKUP UNIT(306) F CD MOTOR PWB-G 654 321 CNS3B 8 CNP3A 654 321 1 M2 SLED MOTOR RD WH GY WH GY WH GY WH 7 1 + 1 2 3 4 5 6 7 8 SW4 PICKUP IN CNS2B + 1 2 3 4 5 6 7 8 CNS2A G CNS1B 1 2 3 4 5 6 7 RD WH BL WH BL WH BL - CNS1A 1 2 3 4 5 6 7 - H M1 SPINDLE MOTOR • The numbers 1 to 12 are waveform numbers shown in page 40. 1 2 3 4 Figure 36 WIRING SIDE OF P.W.BOARD (8/9) – 36 – 5 6 CD-M4000W/CP-M4000 P32 4-B TO DISPLAY PWB TAPE MECHANISM ASSEMBLY CNS703 FC702 1 SW TAPE MECHANISM PWB-F 9 SW 1 3 5 7 9 2 4 6 8 SW SW PH 1 2 SOLENOID + - SOLENOID TAPE MOTOR TAPE 1 PLAYBACK HEAD PK WH BK TAPE 2 RECORD/PLAYBACK/ERASE HEAD PK WH BK GR 654321 3 2 1 CNP101 CNS102 P31 12-D FROM MAIN PWB P31 12-F TO MAIN PWB COLOR TABLE CD LOADING MOTOR PWB-E WH BK WH BK WH RD 6 5 4 3 2 1 M3 CD LOADING MOTOR CNS4 6 1 BI4 + – SW3 DISC NUMBER 7 SW1 OPEN/ CLOSE SW2 CLAMP 8 9 10 Figure 37 WIRING SIDE OF P.W.BOARD (9/9) – 37 – 11 BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 12 CD-M4000W/CP-M4000 VOLTAGE IC1 PIN NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 IC101 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VOLTAGE VOLTAGE 1.6 V 1V 1.6 V 1.8 V 3.3 V 0V 1.6 V 1.6 V 1.6 V 1.6 V 1.6 V 1.6 V 1.5 V 1.5 V 1.5 V 1.5 V 0.8 V 3.2 V 0V 1.6 V 1.6 V 1.6 V 1.6 V 0V 0V 3.2 V 0V 0V 0V 0V 0V 0V 0V 0V 1.6 V 0V 0V 3.2 V 3.2 V 0V 3.7 V 3.7 V 0V 0V 3.7 V 3.2 V 3.2 V 3.2 V 0V 0V 0V 3.2 V 0V 0V 0V 0V 0V 3.2 V 0V 0V 0V 4.7 V 0V 4.9 V 4.9 V 4.9 V 0V 4.9 V 0V 0V 0V 0V 0V 0V 0V 3.2 V 3.2 V 3.2 V 0V 3.2 V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 VOLTAGE Q850 IC2 1.7 V 1.7 V 1.8 V 2.1 V 2.1 V 2.1 V 2V 0V 0V 0V 0V 0V 0V 0V 2.1 V 2.1 V 1.6 V 4.9 V 3V 1.6 V 0V 0V 4.9 V 4.9 V 1.6 V 2.1 V 2.1 V 0V 0V 0V 0V 0V 0V 0V 0V 4.2 V 0V 2.1 V 2.1 V 4.9 V 3.7 V 3.7 V PIN NO. 1 2 3 VOLTAGE 12.93 V 12.31 V 22.1 V Q851 PIN NO. 1 2 3 VOLTAGE 21.4 V 0V 10.1 V VOLTAGE 11.1 V 0V 5V IC301 PIN NO. 1 2 3 4 5 6 7 8 9 IC601 VOLTAGE 0V 0V 0.5 V 2V 0V 1.3 V 0V 0.6 V 3.5 V 3.4 V 0V 0V 7V 4.1 V 0V 3.4 V 0.6 V 0V 0.7 V 0V 2V 0.5 V 0V 0V VOLTAGE 0V 0V 0.3 V 0V 0V 0V 0V 0V 0V VOLTAGE 5V 5V 5V 0V 5V 5V 5V 10 V VOLTAGE PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 VOLTAGE PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0V 0V 0V 5.3 V 5.3 V 5V 5V 5.3 V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 10.2 V 0V ICK1 VOLTAGE 2.1 V 5V 2.1 V 2.1 V 0V 5.1 V 5.1 V 2.9 V 5V 4.3 V 3.9 V 3.9 V 3.5 V 1.3 V 1.3 V 2.1 V 2.4 V 2.3 V 0V 0.4 V 2.7 V 2.7 V 5V 3.5 V VOLTAGE 60.8 V 26.8 V 26.8 V -26.7 V -26.7 V -60.8 V 0V 0V 0V 0V 0V -59 V 59.4 V 0V 0V -58 V 0V 0V IC903 PIN NO. 1 2 3 4 5 6 7 8 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 IC303 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 IC901 Q852 PIN NO. 1 2 3 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 CNP903 PIN VOLTAGE NO. 1 -26.4 V 2 26.5 V 3 0V 4 0V 5 -60.2 V 6 0V 7 60.3 V 8 60.3 V 0.81 V 1V 0.75 V 2.5 V 4.6 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 0.5 V 2.5 V 0V 5V 0V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 0V 0V 0V 0V 0V CNP901 PIN VOLTAGE NO. 1 0V 2 0V 3 0V 4 0V 5 21.7 V 6 0V 7 10.4 V 8 12.25 V 9 -13.25 V 10 0 V 11 3.88 V 12 4.38 V 13 5.02 V – 38 – PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 IC701 PIN NO. 4.23 V 51 52 4.14 V 53 0V 54 0V 55 4.15 V 56 4.2 V 57 4.2 V 58 0V 59 0V 60 4.23 V 61 2.34 V 62 1.86 V 63 0V 64 3.87 V 65 4.45 V 66 0V 67 0V 68 0V 69 0V 70 0V 71 0V 72 0V 73 0V 74 0V 75 0V 76 4.63 V 77 4.23 V 78 0V 79 0V 80 0V 81 4.48 V 82 4.25 V 83 4.5 V 84 4.3 V 85 4.44 V 86 2.13 V 87 4.88 V 88 4.9 V 89 4.36 V 90 0V 0V 91 92 12.66 V 12.78 V 93 94 12.3 V 95 4.9 V 96 4.42 V 97 4.33 V 98 4.32 V 99 4.48 V 100 4.78 V VOLTAGE IC702 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 VOLTAGE 0V 0V 0V 0V 8.56 V 8.54 V 0V 0V 8.59 V 8.57 V 8.56 V 8.56 V 8.71 V 8.72 V 0V 0V 0V 5.1 V CNP902 PIN VOLTAGE NO. 1 11.1 V 2 0V 3 21.9 V 4 0V CNP905 PIN VOLTAGE NO. 1 1.95 V 2 -26.3 V 3 -32.8 V 4 -26.3 V VOLTAGE 0V 0V 4.6 V 5V 5V 5V 0V 0V -33.1 V 0V 0V 0V 0V 0V 0V 0V -37.4 V -32.6 V -32.7 V -29.8 V -29.9 V -32.7 V -19.2 V -22 V -32.8 V -30.1 V -32.8 V -17.6 V -32.8 V -32.3 V -24.9 V -19.5 V -22.2 V -33 V -33 V -19.6 V -19.6 V -14.41 V -22.8 V -27.2 V -27.2 V -27.5 V -27.7 V -27.7 V -27.7 V -27.6 V -27.7 V -27.7 V -27.7 V -30.2 V IC704 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE 0V 0V 0V -10.96 V 0V 0V 0V 6.41 V IC703 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE 0.2 V 0.2 V 0.2 V -11 V 0V 0V 0V 6.44 V IC860 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE -10.34 V 3.22 V 0.6 V -12.2 V 0V 0.4 V -10.9 V 10.1 V CD-M4000W/CP-M4000 NOTES ON SCHEMATIC DIAGRAM • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means pico-farad and the unit of the capacitor without such a symbol is microfarad. As to electrolytic capacitor, the expression “capacitance/withstand voltage” is used. (CH), (TH), (RH), (UJ): Temperature compensation (ML): Mylar type (P.P.): Polypropylene type • Schematic diagram and Wiring Side of P.W.Board for this model are subject to change for improvement without prior notice. REF. NO • The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given. 1. In the tuner section, indicates AM indicates FM stereo 2. In the main section, a tape is being played back. 3. In the deck section, a tape is being played back. ( ) indicates the record state. 4. In the power section, a tape is being played back. 5. In the CD section, the CD is stopped. • Parts marked with “ ”( ) are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. POSITION REF. NO SW1 OPEN/CLOSE ON—OFF SW717 REVERSE MODE ON—OFF SW2 CLAMP ON—OFF SW722 CD ON—OFF SW3 DISC NUMBER ON—OFF SW723 TAPE ON—OFF SW4 PICKUP IN ON—OFF SW724 TUNING/DOWN ON—OFF SW601 SPAN SELECTOR 9 kHz/50 kHz SW725 MEMORY SET ON—OFF SW701 ON/STAND-BY ON—OFF SW726 FAST REWIND ON—OFF SW702 CLOCK ON—OFF SW727 FAST FORWARD ON—OFF SW703 TIMER ON—OFF SW728 PLAY ON—OFF SW709 DISC 1 ON—OFF SW729 STOP ON—OFF SW710 DISC 2 ON—OFF SW730 REVERSE PLAY ON—OFF SW711 DISC 3 ON—OFF SW731 REC/PAUSE ON—OFF TUNING UP ON—OFF ON—OFF DESCRIPTION POSITION DESCRIPTION SW712 DISC SKIP ON—OFF SW732 SW713 OPEN/CLOSE ON—OFF SW733 VIDEO SW714 DIMMER ON—OFF SW734 TUNER ON—OFF SW801 VOLTAGE SELECTOR 230-240 V SW715 MONSTER BASS ON—OFF SW716 EQUALIZER ON—OFF TYPES OF TRANSISTOR AND LED FRONT VIEW FRONT VIEW E C B (S) (G) (D) (1) (2) (3) KTA1266 GR KTA1273 Y KTA1274 Y KTC3194 Y KTC3199 GR KTC3203 Y KRC102 M KRC104 M KRC107 M 2SA1015 GR 2SC1845 F FRONT VIEW B C E (1) (2) (3) KTC2026 KIA7810 AP KIA7805 AP – 39 – 4204SRT7 4204UYT7 4204UGT7 31URT21 CD-M4000W/CP-M4000 WAVEFORMS OF CD CIRCUIT Stopped CH1=500 mV DC 10:1 CH3=500 mV DC 10:1 T 1 IC1 21 Stopped CH1=200 mV DC 10:1 500 ms/div (500 ms/div) NORM:20 kS/s IC1 20 1999/04/07 09:51:15 500 ms/div (500 ms/div) NORM:20 kS/s FDO T 1 TDO 2 T CH2=500 mV DC 10:1 3 FDO 1 IC1 21 2 6 IC1 22 1 SPDO CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.000 V CH4 : 0.00 V Stopped CH1=500 mV DC 10:1 1 IC1 21 3 IC1 67 CH2=10 V DC 10:1 =Record Length= Main : 100 K Zoom : 2K CH3=1 V DC 10:1 =Filter= Smoothing : ON BW : FULL =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V Stopped CH1=500 mV DC 10:1 500 ms/div (500 ms/div) NORM:20 kS/s =Record Length= Main : 100 K Zoom : 2K CH3=1 V DC 10:1 =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924 ms Hold off : 0.2 µs 1999/04/05 17:33:17 CH4=1 V 500 ms/div (500 ms/div) DC 10:1 NORM:20 kS/s PDO1 7 FDO IC1 73 3 1 4 T 2 DRF 8 PDO2 IC1 74 T 4 TE IC1 15 3 1 CH Position To -3 div -1 div 0 div +1 div +3 div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000 V Main : 100 K BW : FULL CH2 : 0.0 V Zoom : 2K CH3 : 0.00 V CH4 : 0.00 V IC1 21 FDO 1 CH1 v/DIV 500 mV CH2 Position 0.20 div =Filter= Smoothing : ON BW : FULL =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Stopped CH1=2 V DC 10:1 =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K T =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0 ns Hold off : 0.2 µs 1999/04/07 09:25:28 500 ns/div (500 ns/div) NORM:200 MS/s T 5 9 IC1 39 DOUT =Filter= Smoothing : ON BW : FULL Vp-p=1.0 V~1.3 V 0.5 mV/div,0.5 µsec/div Stopped CH1=10 V DC 10:1 IC1 15 =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 1K Zoom : 100 =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887 ms Hold off : 0.2 µs T CH2=1 V DC 10:1 100 ms/div (100 ms/div) NORM:100 kS/s Stopped CH1=2 V DC 10:1 10 TE 4 1 IC1 4 T CH2=2 V DC 10:1 CH3=2 V DC 10:1 1999/04/05 20:50:17 5 µs/div (5 µs/div) NORM:100 kS/s IC1 58 2 1 LRSY 11 IC1 59 2 3 IC1 67 T 1 DRF DATACK 12 IC1 60 T 3 DATA =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.0 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924 ms Hold off : 0.2 µs =Filter= Smoothing : ON BW : FULL – 40 – CH3 v/DIV 2V =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 5K Zoom : 100 =Trigger= Mode : AUTO Type : EDGE CH3 Delay : 0.0 ns Hold off : 0.2 µs CD-M4000W/CP-M4000 TROUBLESHOOTING When the CD does not function When the CD section does not operate when the objective lens of the optical pickup is dirty, this section may not operate. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check the following items. Remove the cabinet and follow the trouble shooting instructions. "Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attempting any adjustment make certain that the lens is clean. If not, clean it as mentioned below." Turn off the power, and wipe the lens softly using a cleaning paper moistened with commercially available cleaning solution so as not to damage it. Be careful not to touch the lens with bare hands. Dust gradually accumulates on the objective lens during use, and it may degrade performance. To avoid this problem, use a cleaning disc designed for CD optical pickup lenses.. 1. CD optical pickup Lens cleaner disc Parts code UDSKA0004AFZZ HOW TO USE 1. Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the brush on the CD cleaner disc which has the mark next to it. 2. Place the CD cleaner disc onto the CD disc tray with the brush side down,then press the play button. 3. You will hear music for about 20 seconds and the CD player will automatically stop. If it continuous to turn, press the stop button. Cleaning fluid CAUTION The CD lens cleaner should be effective for 30-50 operations, however if the brushes become worn out earlier then please the cleaner disc. If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft cloth. Do not drink the cleaner fluid or allow it to come in contact with the eyes. In the event of this happening then drink and / or rinse with clean water and seek medical advice. The CD cleaner disc must not be used on car CD players or on computer CD-ROM drives. All rights reserved. Unauthorized duplicating, broadcasting and renting this product is prohibited by law. Cleaner disc When a CD cannot be played 1. "E-CD01" is displayed. (1) Check the power to IC1 (LC78645E), the presence of the clock signal (33.8688 MHz) and the status of the RESET terminal (pin 66 on IC1). (2) Does the pickup move to the PICKUP-IN Switch (SW4) position? If (1) and (2) are OK, check the system microcomputer (especially the communication line with the DSP). 2. Pressing the CD operation key is accepted, but playback does not occur. (1) Focus-HF system check (2) Tracking system check (3) Spin system check (4) PLL system check (5) Others – 41 – CD-M4000W/CP-M4000 Stopped CH1=500 mV DC 10:1 (1) Focus-HF system check. Although a CD is inserted and the cover is closed, "NO DISC" is displayed. CH3=500 mV DC 10:1 T 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 Press the OPEN/CLOSE switch (SW1) without inserting a disc, and try starting the playback operation. TDO 3 CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.000 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Figure 42-1 1. Does the pickup move to the PICKUP-IN Switch (SW4) position ? No Sled motor (M2). Yes No 2. Does the focus (lens) move up and down ? (Waveform drawing Figure 42-1) Check the focus peripheral circuit. Yes No 3. Is the laser lit ? Check the laser diode driver Q1 peripheral circuit. Yes No 4. Is the turntable rotating ? Spindle motor (M1). When a disc is loaded, start playback operation. No 1. Is focus servo activated ? (Waveform drawing Figure 42-2) Pins 7~12, 79 and 80 on IC1 Check the laser diode driver Q1 peripheral circuit. Yes No 2. Does DRF change from "L" to "H" ? Is the disc rotating ? 3. Is the HF waveform normal ? (Waveform drawing Figure 42-3) CH3=1 V DC 10:1 Check the spin system. If the disc is spinning and a HF waveform is generated, DRF will go H. Yes Stopped CH1=500 mV CH2=10 V DC 10:1 DC 10:1 No No If the level is not normal. 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 T 2 DRF TE 3 CH Position To -3 div -1 div 0 div +1 div +3 div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000 V Main : 100 K BW : FULL CH2 : 0.0 V Zoom : 2K CH3 : 0.00 V CH4 : 0.00 V CH2 Position 0.20 div =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Vp-p=1.0 V~1.3 V 0.5 mV/div,0.5 µsec/div Figure 42-2 Figure 42-3 – 42 – CD-M4000W/CP-M4000 (2) Tracking system check. Check the TE waveform at pin 15 on IC1. If the waveform shown in Figure 43-1 appears and soon after NO DISC appears ? Yes The tracking servo is not activated. Check the peripheral circuits at pins 14, 15 and 20 on IC1, and CNS1A/B. Yes A normal jump operation cannot be completed or the beginning of the track cannot be found. Check the around pin 20 on IC1. No "Initialization" is possible, but play is not possible ? No "Initialization" is not possible. Data cannot be read. Check the VCO-PLL system. Stopped CH1=10 V DC 10:1 T CH2=1 V DC 10:1 100 ms/div (100 ms/div) NORM:100 kS/s TE 2 T 1 DRF =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.0 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924 ms Hold off : 0.2 µs Figure 43-1 (3) Spin system check. Press the OPEN/CLOSE switch without inserting a disc, and then try starting the play operation. 1. The turntable rotates a little ? (Waveform drawing Figure 43-2) The spin driver circuit is OK. Yes No 2. The turntable doesn't rotate. Check around pin 22 on IC1, pins 15 and 16 on IC3, and CNS3A/B. Stopped CH1=200 mV DC 10:1 T 1999/04/07 09:51:15 500 ms/div (500 ms/div) NORM:20 kS/s CH2=500 mV DC 10:1 T FDO 2 1 SPDO =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K Figure 43-2 – 43 – =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924 ms Hold off : 0.2 µs CD-M4000W/CP-M4000 (4) PLL system check. Stopped CH1=500 mV DC 10:1 CH3=1 V DC 10:1 1999/04/05 17:33:17 CH4=1 V 500 ms/div (500 ms/div) DC 10:1 NORM:20 kS/s PDO1 When a disc is loaded, start play operation. 3 4 The HF waveform is normal, but the TOC data cannot be read. PDO2 T FDO 1 Check the PDO waveform. (Figure 44-1) CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0 ns Hold off : 0.2 µs Check around pins 73~78 on IC1. Figure 44-1 (5) Others. The HF waveform is normal and the time is displayed normally, but no sound is produced. Or the sound has dropouts. No Is pin 52 (C2F) on IC1 "L" ? There are too many error flags on a damaged disc which makes error correction impossible. Yes 1. When playing at normal speed. Check the peripheral circuit at pin 39 (DOUT) on IC1 and the waveform (Figure 44-2). Check again using a known good disc. Stopped CH1=2 V DC 10:1 If OK, Check the unit. T 1999/04/07 09:25:28 500 ns/div (500 ns/div) NORM:200 MS/s T 1 DOUT =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 1K Zoom : 100 Figure 44-2 – 44 – =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887 ms Hold off : 0.2 µs CD-M4000W/CP-M4000 FUNCTION TABLE OF IC IC1 VHiLC78645E-1: CD Servo (LC78645E) (1/2) Pin No. Terminal Name Input/Output Setting in Reset 1 SLCO Output — 2 SLCIST Input — 3 EFMIN Input — 4 RF Output — 5 RFVDD Input — RF power terminal. 6 RFVSS — — RF earth terminal. To be connected to 0 V. 7 FIN1 Input — A+C signal input terminal. 8 FIN2 Input — B+D signal input terminal. 9 TIN1 Input — E signal input terminal. 10 TIN2 Input — F signal input terminal. 11 VREF Output RFVDD/2 12 REFI Input — 13* FE Output ZHI 14 TEC Output — 15* TE Output ZHI TE signal monitor terminal. 16* RFMON Output ZHI RF internal signal monitor terminal. 17 JITTC — — Capacitor connection terminal for jitter detection. 18 ADAVDD Input — Power terminal for servo A/D, D/A. 19 ADAVSS — — Earth terminal for serve A/D, D/A. To be connected to 0 V. 20 TDO Output ADAVDD/2 Output terminal for tracking control. D/A output. 21 FDO Output ADAVDD/2 Output terminal for focus control. D/A output. 22 SPDO Output ADAVDD/2 Output terminal for spindle control. D/A output. 23 SLDO Output ADAVDD/2 Output terminal for sled control. D/A output. 24* GPDAC Output ADAVDD/2 25 CONT4 Input/Output Input Mode 26 CONT5 Input/Output Input Mode 27* SBCK/CONT6 Input/Output Input Mode 28 SBCK/FG Input — Subcode reading clock input terminal/FG signal input terminal/external emphasis setting terminal. Terminal functions are set by commands. When not used, connect to 0 V. 29* DEFECT Output L Defect terminal. 30* V/*P Output H Auto switching monitor output terminal for rough servo phase control. “H”: rough servo, “L”: phase servo. 31* FSEQ Output L Sync signal detection output terminal. The status changes to “H” when the sync signal detected in EFM and the sync signal of internal generation are identified. 32* MONI1 Output L Internal signal monitor terminal 1. 33* MONI2 Output L Internal signal monitor terminal 2. 34* MONI3 Output L Internal signal monitor terminal 3. 35* MONI4 Output L Internal signal monitor terminal 4. 36* MONI5 Output L Internal signal monitor terminal 5. 37 VSS — — Digital system earth terminal. To be connected to 0 V. 38 VDD Input — Digital system power terminal. Function Control output. For slice level control. Resistor connection terminal for SLCO output current setting. RF signal input terminal. RF signal monitor terminal. VREF voltage output terminal. Reference supply setting terminal. FE signal monitor terminal. LPF capacitor connection terminal for TE signal. Servo D/A general-purpose output terminal. Controlled by commands from the microcomputer. When not used, set General-purpose I/O terminal 5. them as input terminals and connect General-purpose I/O terminal 6 or to 0 V, or set them as output Subcode reading clock input terminal. terminals and leave open. General-purpose I/O terminal 4. 39* DOUT Output L Digital OUT output terminal. (EIAJ format) 40 TEST Input L Input terminal for test. To be connected to 0 V. 41 LVDD Input — 42 LCHO Output LVDD/2 43 LVSS — — Power supply for Left channel. Left channel D/A converter Left channel output. GND for Left channel. Must be connected to 0 V. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 45 – CD-M4000W/CP-M4000 IC1 VHiLC78645E-1: CD Servo (LC78645E) (2/2) Pin No. Terminal Name Input/Output Setting in Reset 44 RVSS — — 45 RCHO Output LVDD /2 46 RVDD Input — 47 XVDD Input — 48 XOUT Output — 49 XIN Input — 50 FSX/16MIN Input/Output Input 51 XVSS — — 52* C2F Output H C2 FLAG monitor port. 53* EFLG Output L C1, C2 error corrected monitor port. 54* 16MOUT Output Clock 55 ASLRCK Input — 56 ASDACK Input — 57 ASDFIN Input — 58* LRSY Output L 59* DATACK Output L 60* DATA Output L Left/Right channel data output port. 61 CE Input — Chip enable signal input port. 62 CL Input — Microcomputer 63 DI Input — Interface 64 DO Output (H) 65 *WRQ Output H Interruption signal output. 66 *RES Input — Chip reset signal input port. This port must be set LOW after first applied power on. 67 DRF Output L Focus detection output port. 68 VDD5 Input — Power supply for Microprocessor. 69 VSS — — 70 CONT3 Input/Output Input 71 CONT2 Input/Output Input 72* CONT1 Input/Output Input 73 PDO1 Output — 74 PDO2 Output Input 75 VVSS — — 76 PCKIST Input — 77 VVDD Input — Power supply for internal VCO. 78 FR Input — VCO frequency range adjustment port. 79 LDS Input — LASER power detected signal input port. 80 LDD Output — LASER power control signal output port. Function Right channel D/A converter GND for Right channel. Must be connected to 0 V. Right channel output. Power supply for Right channel. Power supply for crystal oscillator. Crystal Oscillator Connected for the 33.8688 MHz crystal oscillator cement. 7.35 kHz Synchronization signal monitor port. or Clock input port for Digital filter & D/A Crystal Oscillator GND for crystal oscillator. Must be connected to 0 V. 16.9344 MHz output port. Word clock input port. (If this port does not use, must be connect to 0 V.) Anti-shock Bit clock input port. (If this port does not use, must be connect to 0 V.) Left/Right channel data input port. (If this port does not use, must be connect to 0 V.) Word clock output port. Digital data Bit clock output port. Data transfer clock input port. Data input port. Data output port. (N-ch. open drain output.) GND for digital circuit. Must be connected to 0 V. General purpose port 1. Controlled with serial data command from microcomputer. When not used, General purpose input/ General purpose port 2. output terminal 7. set it as the input terminal and open it by connecting to 0 V, or set it as the output terminal General purpose port 3. and open it. Internal VCO control phase comparator output port 1. Internal VCO control phase comparator output port 2. PLL GND for internal VCO. Must be connected to 0 V. PDO output current adjustment resistor connection port. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. Be sure to supply the same potential to each power terminal. (VVDD, ADAVDD, VDD, LVDD, RVDD, XVDD) Terminal witch is controlled by the power terminal (VDD5V) for a microcomputer interface : CE(61 pin), CL(62 pin), DI(63 pin), DO(64 pin), WRQ(65 pin), RES(66 pin), DRF(67 pin) – 46 – CD-M4000W/CP-M4000 LDD LDS FR VVDD PCKIST VVSS PD02 PD01 CONT1 CONT2 CONT3 VSS VDD5 DRF *RES *WRQ DO DI CL CE IC1 VHiLC78645E-1: CD Servo (LC78645E) 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 SLC0 1 60 DATA SLCIST 2 59 DATACK EFMIN 3 58 LRSY RF 4 57 ASDFIN RFVDD 5 56 ASDACK RFVSS 6 55 ASLRCK FIN1 7 54 16MOUT FIN2 8 53 EFLG TIN1 9 52 C2F TIN2 10 51 XVSS LC78645E VREF 11 50 FSX/16MIN REFI 12 49 XIN 35 36 37 FIN1 + – FIN2 + – TIN1 + – TIN2 + – MIX MONI4 (3.3V)VSS AGC 38 39 40 TEST 34 VDD 32 33 DOUT 31 MONI5 29 30 MONI3 28 RF 26 27 TEC 25 MONI2 24 TE 23 FE 22 V/*P FD0 21 MONI1 41 LVDD FSEQ 42 LCH0 TD0 20 DEFECT 43 LVSS ADAVSS 19 SBCK/FG 44 RVSS ADAVDD 18 SBCK/CONT6 45 RCH0 JITTC 17 CONT5 46 RVDD RFMON 16 CONT4 47 XVDD TE 15 GPDAC TEC 14 SLD0 48 XOUT SPD0 FE 13 EQ RFVDD RFVSS PH + – LPF TBAL + BH LPF SW + – LPF + – + – – TBAL LEVEL SET MONI CONT – + REF1 RFMON RAM VREF DETECT TRACK JUMP ADIN ADAVDD ADAVSS SERVO PROCESSOR A/D LDS JITTER DETECT JITTC SLC0 EFMIN SLCIST SW DRF XIN XOUT 16MOUT XVDD XVSS *RES *WRQ CL CE DI DO VDD5V CONT1, 2, 3 CONT4, 5 SBCK/CONT6 VDD RUPTURE DEFECT PLL VCEC FRAME SYNC DETECT,PROTECT INSERT, EFN DECODE CLV,CAV CONTROL SBCK/FG FD0 TD0 SLD0 SPD0 GPDAC D/A S/H SLICE LEVEL CONTROL PCK PDO1 PDO2 FR PCKIST VVDD VVSS LDD APC AUTO ADJUST DRF FSEQ V/*P SUBCODE DECODE CRC CLOCK MONITOR SIGNAL SELECTOR VDD VSS MONI1~5 GENERATOR RAM ERROR COMMAND CORRECTION INTERFACE AUDIO CD FSK/16MIN C2F EFLG AUDIO OUT GENERAL-PURPOSE PORTS DOUT 8FS DIGITAL FILTER INTERPOLATION MUTE ATTENUATION DEEMPHSIS SERIAL OUT LRSY DATACK DATA 1bit DAC LPF EXTERNAL AUDIO IN ASLRCK ASDQCK ASDFIN RVDD RVSS RCHO LCHO LVDD LVSS TEST Figure 47 BLOCK DIAGRAM OF IC – 47 – CD-M4000W/CP-M4000 IC701 RH-iX0460AWZZ: System Microcomputer (IX0460AW) (1/2) Pin No. Port Name 1 VDD VDD 2 P37 -20 dB ATT 3 P36 NO USE Terminal Name DSA_STB Input/Output Function Input (+) Power supply. Output -20 dB attenuator. Output Input/Output Output GND DSA strube 4 P35 T_BIAS 5 P34 T_T1/T2 Output Tape T1/T2 change. 6 P33 REC/PLAY Output Tape REC/PLAY change. 7 P32 RES OUT Output CD DSP RESET & MPEG microcomputer reset. 8 P31 DRF Input Tape record BIAS. CD RF level detection. 9 P30 WRQ Input CD DSP write request. 10 RESET RESET Input Reset 11 X2 X2 Output Main clock. 12 X1 X1 Input Main clock. 13 VPP/IC XVPP/IC — GND 14* XT2 XT2 — Open 15 P04 SPN Input 16 VDD VDD Input 17 P27 CD CLK Output CD DSP clock. 18 P26 CD DI Output CD DSP commsnd. 19 P25 CD DO Input CD DSP code Q out. 20 P24 CD CE Output CD DSP CE output. 21 P23 CE Output CE output. 22 P22 CLK Output Clock output. 23 P21 DI Output Data output. 24 P20 DO Input (+) Power supply. Data input. 25 AVSS AVSS 26 ANI7 O/C SW Input CD open/Close switch. DISC NO SW Input CD disc number switch. DSA_DATA 27 ANI6 — Tuner span change. Input/Output Analog ground. DS data input. NO USE Input GND. TUNER SM Input Tuner signal meter input. DSA_ACK Input/Output 28 ANI5 SPEANA 2 Input Speana data input 16 kHz. 29 ANI4 SPEANA 1 Input Speana data input 1 kHz. 30 ANI3 SPEANA 0 Input Speana data input 63 kHz. 31-33 ANI2-ANI0 KEY 2-KEY 0 Input Key input. 34 AVDD AVDD Input Analog VDD. 35 AVREF AVREF Input Analog REF voltage. 36 INTP3 P_IN Input Power failure detect. 37 P02 JOG 1 Input JOG volume input 1. 38 P01 JOG 0 Input JOG volume input 0. 39 INTP0 REMOCON Input Remocon input. 40 VSS VSS 41 P74 SMUTE Output System mute control. 42 P73 T_SOL_B Output Tape 2 solenoid control. 43 P72 T_SOL_A Output Tape 1 solenoid control. 44 P71 T_MOTOR Output Tape motor control. 45 P70 TIMER LED Output Timer LED control. 46 VDD VDD Input (+) Power supply. 47* P127 AC RLY_CONT Output AC relay control. 48 P126 SP-RLY Output Speaker output relay control. 49 P125 SP_DET Input — DSA acr. Ground voltage. Speaker output detection. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 48 – CD-M4000W/CP-M4000 IC701 RH-iX0460AWZZ: System Microcomputer (IX0460AW) (2/2) Pin No. Port Name 50 P124 T 1 RUN Input Tape 1 run pulse imput. 51 P123 T 2 RUN Input Tape 2 run pulse input. 52 P122 CD CLAMP SW Input CD changer clamp switch. 53 P121 XBAS-MONST Input X-BASS/Monster ekchange control. L:X-BASS, H:Monster 54 P120 PLAY SW_B Input PLAY switch for T2. 55 P117 FPA Input Tape 2 A-SIDE full proof. 56 P116 FPB Input Tape 2 B-SIDE full proof. 57 P115 MIC SW Input Mic switch. 58 P114 LCK 0 59 P113 DISTOUT Output Destination output. 60 FIP39 NO USE Output GND 61 FIP38 KARAOKE LATCH Output Karaoke latch. 62 FIP37 NO USE Output GND MPEG_POW Output Mpeg power control. 63* FIP36 NO USE Output GND RDS RST/ESS_ACE Output RDS fan reset/Dsa sys acenowledge. 64 FIP35 Terminal Name Input/Output Output Function LED driver lck. NO USE Input GND RDS RDDA/ESS_STB Input RDS transmit data input/dsa strobe. 65* FIP34 NO USE Output GND RDS RDCL/ESS_DI Output RDS clock/Dsa data output. 66 FIP33 NO USE Input GND RDS READY/ESS_DO Input Ready/dsa data input. Input Destination input. 67 P103 DIST3 FIP32 P22 68 P102 DIST2 FIP31 P21 69 P101 DIST1 FIP30 P20 70 P100 DIST0 FIP29 P19 71-78 FIP28-FIP21 P18-P11 79 VLOAD 80-89 FIP20-FIP11 P10-P1 Output FL display driver. 90-100 FIP10-FIP0 Output FL display driver. VLOAD G11-G1 Output FL display driver. Input Destination input. Output FL display driver. Input Destination input. Output FL display driver. Input Destination input. Output FL display driver. Output FL display driver. Input FL driver (-) power supp. -30 V In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 49 – CD-M4000W/CP-M4000 DI CL VDD Yref 2 1 24 23 22 CCB INTERFACE LTRE 6 20 RBASS 0.1uF CONTROL CIRCUIT CONTROL CIRCUIT LBASS 5 0.1uF 21 ROUT CONTROL CIRCUIT LOUT 4 RVref CE 3 LVref YSS IC601 VHiLC75341/-1: Audio Processor (LC75341) 19 RTRE 18 R1N LIN 7 LSEL0 8 Video Tape CD Tuner 17 RSEL0 R1 R2 R3 R4 RSEL0 16 R4 RIN 15 R3 RTRB 14 R2 RBASS 13 R1 ROUT 12 L1 VREF 11 L2 VDD 10 L3 CL 9 L4 24 23 22 21 20 19 18 17 16 15 14 13 7 8 9 LTRE LIN LSEL0 L4 10 11 12 Figure 50 BLOCK DIAGRAM OF IC – 50 – L1 6 L2 5 L3 4 LBASS CE 3 LOUT 2 VSS 1 DI LC75341 CD-M4000W/CP-M4000 ICK1 VHiM65856SP-1: Mic Amp. (M65856SP) (1/2) Pin No. Port Name Input/Output Input Function 1 MIC SW 2 MCLKCONT — Clock Control. Controls built-in clock generation circuit with external R. 3 VALC — ALC operating voltage setting terminal. To set ALC operating voltage according to applied voltage. 4 MIC1 IN 5* ALC1 6* MIC1NFIN Input 7* MIC1 OUT Output 8 MIC1 VOLIN Input Microphone 1 volume input. To connect capacitor to reduce noise generated at time of volume change. 9 MIC2 IN Input Microphone 2 input. To connect MIC 2. 10 ALC2 11 MIC2 NFIN Input 12 MIC2 OUT Output 13 MIC2 VOLIN 14 MICOUT Output 15 LPF1IN1 Input Low pass filter 1 input 1. Pre-filter before A/D convertor for digital delay. 16 LPF1 IN2 Input Low pass filter 1 input 2. Pre-filter before A/D convertor for digital delay. 17 LPF1 OUT Output Low pass filter 1 output. Pre-filter before A/D convertor for digital delay. 18 AD INTOUT Output A/D integrator output. Composes D/A conversion integrator with external capacitor. 19 AD INTIN Input A/D integrator input. Composes D/A conversion integrator with external capacitor. 20 ADCONT — A/D control. To determine adaptive time constant of A/D convertor with ADM system. 21 REF — Reference power output. To connect 1/2 Vcc output and filter capacitor. Ground. Input — — Input Microphone SW L: MIC OFF, H: MIC ON Microphone 1 input. To connect MIC 1. ALC1 control. To connect ALC1 attack/recovery time setting capacitor. Microphone 1 negative feedback input. To connect low cut-off frequency of MIC1 amplifier setting capacitor. Microphone 1 output. ALC2 control. To connect ALC2 attack/recovery time setting capacitor. Microphone 2 negative feedback input. To connect low cut-off frequency of MIC2 amplifier setting capacitor. Microphone 2 output. Microphone 2 volume input. To connect capacitor to reduce noise generated at time of volume change. Microphone output. Mixing output of MIC 1 and MIC 2. 22 GND — 23 VCC Input 24 DACONT — 25 DAINTIN Input D/A Integrator input. Composes D/A conversion integrator with external capacitor. 26 DAINTOUT Output D/A Integrator output. Composes D/A conversion integrator with external capacitor. 27 LPF2IN1 Input Low pass filter 2 input 1. Post-filter after D/A convertor for digital delay. 28 LPF2IN2 Input Low pass filter 2 input 2. Post-filter after D/A convertor for digital delay. 29 LPF2OUT Output Low pass filter 2 output. Post-filter after D/A convertor for digital delay. 30 VOLIN 31 L IN Input Lch line input. 32 R IN Input Rch line input. Input Power supply. D/A control. To determine adaptive time constant of D/A convertor with ADM system . Echo effect/Echo feed back volume input. To connect capacitor to reduce noise generated at time of volume change. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 51 – CD-M4000W/CP-M4000 ICK1 VHiM65856SP-1: Mic Amp. (M65856SP) (2/2) Pin No. Port Name Input/Output Input Function Monaural input for external KEYCONTROL IC. Input/Output interface terminal for external KEYCONTROL IC. 33* KEYCONIN 34* SOURCEOUT Output Monaural input for external KEYCONTROL IC. Input/Output interface terminal for external KEYCONTROL IC. 35 R OUT Output Rch mixing output. 36 L OUT Output 37 VCF IL — 38* PS1 Input Phase shift input 1. Determines a constant at time of phase shift. 39* PS2 Input Phase shift input 2. Determines a constant at time of phase shift. 40 LATCH Input Latch input via serial bus. 41 CLOCK Input Clock input via serial bus. 42 DATA Input Data input via serial bus. Lch mixing output. Vocal cut filter. Processes frequencies lower then the vocal band. LATCH PS2 PS1 VCFIL LOUT ROUT SOURCEOUT KEYCONIN RIN LIN VOLIN LPF2OUT LPF2IN2 LPF2IN1 DAINTOUT DAINTIN DACONT 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 PHASE SHIFTER SURROUND µ-COM I/F LPF (L,R)/2 L GND CLOCK 42 VCC DATA In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. 23 22 VCC GND D/A R STEREO MIC SW ECHO VOL ECHO F.BVOL 16kbit SRAM MAIN LOGIC MIC VOL MCLK 1/ZVcc MIC VOL ALC 15 16 17 18 19 20 21 REF MIC1OUT 14 ADCONT MIC1NFIN 13 ADINTIN ALC1 12 ADINTOUT MIC1IN 11 LPF1OUT VALC 10 LPF1IN2 MCLKCONT 9 LPF1IN1 MIC SW 8 MICOUT 7 MIC2VOLIN 6 MIC2OUT 5 MIC2NFIN 4 ALC2 3 MIC2IN 2 MIC1VOLIN 1 ND LPF ALC Figure 52 BLOCK DIAGRAM OF IC – 52 – CD-M4000W/CP-M4000 FL DISPLAY FL701 VVKBJ11LM02T1: FL Display 11G S1 B21 B20 B19 B18 B17 B16 B15 S1 B7 B6 B5 B4 10G S1 B3 B2 B1 1G 2G B8 B9 B10 B11 B12 B13 B14 3G 4G 9G S1 S1 B7 B6 B5 B4 B3 B2 B1 5G 6G 7G S1 8G B1 B2 B3 B4 B5 B6 B7 S4 S5 S2 S3 a j h f g col e k b m n r p d c Dp 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G P1 S1 S1 S1 Dp Dp Dp Dp Dp Dp Dp Dp P2 B1 B1 B1 d d d d d d d d P3 B2 B2 B2 c c c c c c c c P4 B3 B3 B3 n n n n n n n n P5 B4 B4 B4 p p p p p p p p P6 B5 B5 B5 r r r r r r r r P7 B6 B6 B6 e e e e e e e e P8 B7 B7 B7 m m m m m m m m g g g g g g g g P9 B8 P10 B9 P11 B10 b b b b b b b b P12 B11 k k k k k k k k P13 B12 j j j j j j j j h h h h h h h h f f f f f f f f P14 B13 col (Hiper) (Lower) P15 B14 P16 B15 a a a a a a a a P17 B16 S2 S2 S2 S2 S2 S2 S2 S2 P18 B17 S3 S3 S3 S3 S3 S3 S3 S3 P19 B18 S4 S4 S4 S4 S4 S4 S4 S4 P20 B19 S5 S5 S5 S5 S5 S5 S5 S5 P21 B20 P22 B21 – 53 – CD-M4000W/CP-M4000 –– MEMO –– – 54 – CD-M4000W/CP-M4000 PARTS GUIDE MINI COMPONENT SYSTEM MODEL CD-M4000W SPEAKER SYSTEM MODEL CP-M4000 “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call Toll-Free; 1-800-BE-SHARP MARK: SPARE PARTS-DELIVERY SECTION Explanation of capacitors/resistors parts codes Capacitors Resistors VCC ....................... Ceramic type VCK ........................ Ceramic type VCT ........................ Semiconductor type VC • • MF ............... Cylindrical type (without lead wire) VC • • MN ............... Cylindrical type (without lead wire) VC • • TV ................ Square type (without lead wire) VC • • TQ ............... Square type (without lead wire) VC • • CY ............... Square type (without lead wire) VC • • CZ ............... Square type (without lead wire) VC • • • • • • • • • J .. The 13th character represents capacity difference. ("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%, "C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.) VRD ....................... Carbon-film type VRS ........................ Carbon-film type VRN ....................... Metal-film type VR • • MF ............... Cylindrical type (without lead wire) VR • • MN ............... Cylindrical type (without lead wire) VR • • TV ................ Square type (without lead wire) VR • • TQ ............... Square type (without lead wire) VR • • CY ............... Square type (without lead wire) VR • • CZ ............... Square type (without lead wire) VR • • • • • • • • • J .. The 13th character represents error. ("J" ±5%, "F" ±1%, "D" ±0.5%.) If there are no indications for the electrolytic capacitors, error is ±20%. If there are no indications for other parts, the resistors are ±5% carbon-film type. NOTE: Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace parts with specified ones for maintaining the safety and performance of the set. – 55 – CD-M4000W/CP-M4000 NO. PRICE RANK PARTS CODE DESCRIPTION CD-M4000W INTEGRATED CIRCUITS IC1 IC2 VHILC78645E-1 VHIM63001FP-1 J J IC101 VHIAN7345K/-1 J IC301 IC302 IC303 VHITA7358AP-1 VHILC72131/-1 VHILA1832S/-1 J J J IC601 IC701 VHILC75341/-1 RH-IX0460AWZZ J J IC702 IC703,704 IC860 IC901 ICK1 ICK2 VHIBU2092F/-1 VHIKIA4558P-1 VHIKIA4558P-1 VHISTK41203-1 VHIM65856SP-1 VHIKIA4558P-1 J J J J J J AY CD Servo,LC78645E AX Focus/Tracking/Spin/Sled Driver, M63001FP AM Playback and Record/Playback Amp.,AN7345K AG FM Front End,TA7358AP AP PLL (Tuner),LC72131 AN FM IF Det./FM Mpx./AM IF, LA1832S AM Audio Processor,LC75341 System Microcomputer, IX0460AW AM Input/Output Expander,BU2092F AC Ope Amp.,KIA4558P AC Ope Amp.,KIA4558P Power Amp.,STK41203 AX Mic Amp.,M65856SP AC Ope Amp.,KIA4558P TRANSISTORS Q1 Q2 Q3 Q103~106 Q107,108 Q109 Q110,111 Q121,122 Q124 Q126 Q128 Q302 Q360 Q603~606 Q701~703 Q704,705 Q708 Q709 Q803 Q850 Q851 Q852 VSKTA1266GR-1 VSKTC3203Y/-1 VSKRC102M//-1 VS2SC1845F/-1 VSKTC3199GR-1 VSKTA1266GR-1 VSKRC104M//-1 VSKTC3199GR-1 VS2SA1015GR-1 VSKRC104M//-1 VSKTC3203Y/-1 VSKTC3194Y/-1 VSKTA1266GR-1 VSKTC3199GR-1 VSKTC3199GR-1 VSKTA1273Y/-1 VSKTA1273Y/-1 VSKRC102M//-1 VSKTA1274Y/-1 VSKTC2026//-1 VHIKIA7810AP1 VHIKIA7805AP1 J J J J J J J J J J J J J J J J J J J J J J AB AC AC AC AB AB AC AB AB AC AC AD AB AB AB AE AE AC AE AF AF AF Q862,863 Q864 Q865 Q901~904 Q905 Q907 QK1 VSKTC3199GR-1 VSKRC102M//-1 VSKTC3199GR-1 VSKTC3199GR-1 VSKRC107M//-1 VSKTC3203Y/-1 VSKTC3203Y/-1 J J J J J J J AB AC AB AB AC AC AC Silicon,PNP,KTA1266 GR Silicon,NPN,KTC3203 Y Digital,NPN,KRC102 M Silicon,NPN,2SC1845 F Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1266 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3199 GR Silicon,PNP,2SA1015 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3203 Y Silicon,NPN,KTC3194 Y Silicon,PNP,KTA1266 GR Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1273 Y Silicon,PNP,KTA1273 Y Digital,NPN,KRC102 M Silicon,PNP,KTA1274 Y Silicon,NPN,KTC2026 Voltage Regulator,KIA7810AP Constant Voltage Regulator, KIA7805AP Silicon,NPN,KTC3199 GR Digital,NPN,KRC102 M Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3199 GR Digital,NPN,KRC107 M Silicon,NPN,KTC3203 Y Silicon,NPN,KTC3203 Y VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDTS6B04GM-1 VHDD10XB60F-1 VHDDS1N404S-1 VHDDS1N404S-1 VHDDS1SS133-1 VHDDS1N404S-1 VHDDS1N404S-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHP4204UYT7-1 VHP31URT21+-1 VHP4204UYT7-1 VHP4204UGT7-1 J J J J J J J J J J J J J J J J J J J J J J J AB AB AB AB AB AB AB AP AL AB AB AB AB AB AB AB AB AB AB AD AD AD AD Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,TS6B04GM Silicon,D10XB60F Silicon,DS1N404S Silicon,DS1N404S Silicon,DS1SS133 Silicon,DS1N404S Silicon,DS1N404S Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 LED,Yellow,4204UYT7 LED,Red,31URT21 LED,Yellow,4204UYT7 LED,Green,4204UGT7 DIODES D1,2 D301,302 D305 D701~704 D712,713 D718 D720~723 D809 D810 D811~816 D818 D861~863 D864 D901,902 D907~909 D911~913 DK1,2 DT701 DT703 LED701,702 LED703,704 LED705 LED706~708 NO. LED722 ZD1 ZD2 ZD351 ZD701 ZD801 ZD802 ZD804 ZD851 ZD901,902 ZD951 ZDK1 PRICE RANK PARTS CODE DESCRIPTION VHP4204SRT7-1 VHEDZ3R3BSB-1 VHEDZ3R9BSB-1 VHEDZ5R1BSB-1 VHEMTZJ6R2C-1 VHEDZ300BSB-1 VHEDZ6R2BSA-1 VHEDZ110BSB-1 VHEDZ3R9BSB-1 VHEDZ120BSB-1 VHEDZ130BSB-1 VHEMTZJ5R6B-1 J J J J J J J J J J J J AD AB AC AC AC AB AB AB AC AB AB AD LED,Red,4204SRT7 Zener,3.3V,DZ3.3BSB Zener,3.9V,DZ3.9BSB Zener,5.1V,DZ5.1BSB Zener,6.2V,MTZJ6.2C Zener,30V,DZ30BSB Zener,6.2V,DZ6.2BSA Zener,11V,DZ11BSB Zener,3.9V,DZ3.9BSB Zener,12V,DZ12BSB Zener,13V,DZ13BSB Zener,5.6V,MTZJ5.6B RFILR0008AWZZ RFILF0124AFZZ RFILF0003AWZZ RFILA0009AWZZ J J J J AE AD AK AE Band Pass Filter FM IF,10.7 MHz FM IF AM IF RCILB0065AWZZ RCILI0017AWZZ RCILA0052AWZZ RCILB0067AWZZ RCILI0019AWZZ RTRNP0365AWZZ J J J J J J AC AB AE AD AD FM,OSC FM IF AM Tracking AM,OSC AM IF Power VP-XHR82K0000 VP-MK331K0000 RCILR0056AWZZ VP-DH101K0000 RCILZ0137AFZZ J J J J J AC AB AB AB AA 0.82 µH 330 µH,Choke FM RF 100 µH,Choke 0.29 µH J AF 20 kohms (B) [Mic Volume] FILTERS BF301 CF303 CF351 CF352 TRANSFORMERS T301 T302 T303 T306 T351 1 T801 COILS L1 L104 L312 L351,352 L901,902 VARIABLE RESISTOR VRK1 92LVRR1674A VARIABLE CAPACITORS VD301 VD302,303 VHCSVC348S/-1 VHCKDV147B/-1 J J AK Variable Capacitance,SVC348S AH Variable Capacitance,KDV147B J J J J AF AF AF AH Crystal,456 kHz Crystal,4.5 MHz Ceramic,33.8688 MHz Crystal,4.1943 MHz J J J J J J J J J J J J J J J J J J J J J J J J J J J AB AA AB AA AB AB AA AB AB AB AA AA AB AD AB AB AA AA AA AA AA AB AB AB AA AB AC 47 µF,25V,Electrolytic 0.01 µF,16V 47 µF,25V,Electrolytic 0.001 µF,50V 0.047 µF,50V,Mylar 0.1 µF,16V 0.0047 µF,16V 100 µF,10V,Electrolytic 10 µF,50V,Electrolytic 0.22 µF,50V,Electrolytic 100 pF,50V 0.022 µF,25V 100 µF,10V,Electrolytic 330 µF,6.3V,Electrolytic 100 µF,10V,Electrolytic 10 µF,50V,Electrolytic 0.0015 µF,16V 0.022 µF,25V 100 pF,50V 100 pF,50V 100 pF,50V 0.047 µF,50V,Mylar 2.2 µF,50V,Electrolytic 0.1 µF,16V 0.01 µF,16V 100 µF,10V,Electrolytic 220 µF,6.3V,Electrolytic VIBRATORS X351 X352 XL1 XL701 92LCRSTL1425A RCRSP0019AWZZ RCRM-0041AWZZ RCRSP0003AWZZ CAPACITORS C1 C2 C3 C4 C5 C6 C8 C9 C10 C11 C12 C13 C14 C16 C18 C23,24 C25,26 C27 C28 C30 C32~34 C35 C36 C37 C38 C39 C40 –1– VCEAZA1EW476M VCTYMN1CY103N VCEAZA1EW476M VCKYMN1HB102K VCQYKA1HM473J VCTYPA1CX104K VCTYMN1CX472K VCEAZA1AW107M VCEAZA1HW106M VCEAZA1HW224M VCCSPA1HL101J VCTYMN1EF223Z RC-EZY107AF1A VCEAEA0JW337M VCEAZA1AW107M RC-EZY106AF1H VCTYMN1CX152K VCTYMN1EF223Z VCKYMN1HB101K VCKYMN1HB101K VCKYMN1HB101K VCQYKA1HM473J VCEAZA1HW225M VCTYPA1CX104K VCTYMN1CY103N VCEAZA1AW107M VCEAZA0JW227M CD-M4000W/CP-M4000 NO. C41 C42 C44 C48 C49 C50 C51 C101,102 C105,106 C107,108 C111~114 C115,116 C117,118 C119,120 C121,122 C123,124 C127 C128 C131,132 C133,134 C135,136 C139,140 C141,142 C145 C146 C150 C151 C152 C153 C154 C303 C304 C305 C306 C307 C308 C309 C310 C311 C312 C313 C314,315 C316 C317 C318 C323 C324 C330 C331 C332 C334 C335 C338 C342 C350,351 C352 C353,354 C355 C356 C357 C358 C361 C362 C363 C364 C365 C366 C367,368 C369 C370~372 C373,374 C380 C381 C382 C385 C386 C387 C388 C391 C392 C393 C394 PARTS CODE VCEAZA1AW107M VCTYMN1CY103N VCKYMN1HB102K VCKZPA1HF223Z VCEAZA1EW476M VCCCPA1HH220J VCTYBT1EF223Z VCKYMN1HB561K VCKYMN1HB181K VCKYMN1HB561K VCKYMN1HB331K VCEAZA1EW107M VCTYPA1EX333K VCKYMN1HB561K VCEAZA1HW105M VCTYPA1EX222K VCTYMN1EF223Z VCEAZA1HW335M VCKYMN1HB271K VCEAZA1EW226M VCTYPA1CX223K VCTYMN1CX332K VCEAZA1EW476M VCEAZA1HW226M VCEAZA1AW227M VCQPKA2AA822J VCQYKA1HM393K VCEAZA1EW476M VCEAZA1CW107M VCKYPA1HF473Z VCCCMN1HH100J VCTYMN1CY103N VCCCMN1HH4R7C VCTYMN1EF223Z VCEAZA1CW106M VCCCMN1HH4R7C VCKYMN1HB102K VCCCMN1HH150J VCCSMN1HL180J VCTYMN1EF223Z VCCCMN1HH220J VCTYMN1CX472K VCTYMN1EF223Z VCKYMN1HB102K VCKYMN1HB101K VCTYMN1EF223Z VCCUMN1HJ8R2D VCCUMN1HJ150J VCKYPA1HF473Z VCTYMN1EF223Z VCCUMN1HJ220J VCKYMN1HB561K VCKYMN1HB102K VCTYMN1EF223Z VCTYMN1EF223Z VCEAZA1CW106M VCTYMN1EF223Z VCCSMN1HL220J VCKYMN1HB102K VCEAZA1HW225M VCEAZA1HW105M VCTYMN1EF223Z VCEAZA1HW335M VCTYMN1EF223Z VCEAZA1HW225M VCKYPA1HF223Z VCKYMN1HB102K VCEAZA1HW105M VCCUMN1HJ270J VCEAZA1HW105M VCTYPA1CX183K VCEAZA1CW106M VCCCMN1HH120J VCCCMN1HH150J VCTYMN1CY103N VCKYMN1HB331K VCTYMN1EF223Z VCKYMN1HB102K VCEAZA1CW476M VCKYMN1HB102K VCEAZA1HW105M VCEAZA1CW476M J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J PRICE RANK DESCRIPTION AB AA AA AA AB AA AA AA AA AA AA AB AA AA AB AA AA AB AA AB AA AA AB AB AC AA AB AB AC AB AA AA AA AA AC AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AC AA AA AA AB AB AA AB AA AB AB AA AB AA AB AA AC AA AA AA AA AA AA AB AA AB AB 100 µF,10V,Electrolytic 0.01 µF,16V 0.001 µF,50V 0.022 µF,50V 47 µF,25V,Electrolytic 22 pF (CH),50V 0.022 µF,25V 560 pF,50V 180 pF,50V 560 pF,50V 330 pF,50V 100 µF,25V,Electrolytic 0.033 µF,25V 560 pF,50V 1 µF,50V,Electrolytic 0.0022 µF,25V 0.022 µF,25V 3.3 µF,50V,Electrolytic 270 pF,50V 22 µF,25V,Electrolytic 0.022 µF,16V 0.0033 µF,16V 47 µF,25V,Electrolytic 22 µF,50V,Electrolytic 220 µF,10V,Electrolytic 0.0082 µF,100V,Polypropylene 0.039 µF,50V,Mylar 47 µF,25V,Electrolytic 100 µF,16V,Electrolytic 0.047 µF,50V 10 pF (CH),50V 0.01 µF,16V 4.7 pF (CH),50V 0.022 µF,25V 10 µF,16V,Electrolytic 4.7 pF (CH),50V 0.001 µF,50V 15 pF (CH),50V 18 pF,50V 0.022 µF,25V 22 pF (CH),50V 0.0047 µF,16V 0.022 µF,25V 0.001 µF,50V 100 pF,50V 0.022 µF,25V 8.2 pF (UJ),50V 15 pF (UJ),50V 0.047 µF,50V 0.022 µF,25V 22 pF (UJ),50V 560 pF,50V 0.001 µF,50V 0.022 µF,25V 0.022 µF,25V 10 µF,16V,Electrolytic 0.022 µF,25V 22 pF,50V 0.001 µF,50V 2.2 µF,50V,Electrolytic 1 µF,50V,Electrolytic 0.022 µF,25V 3.3 µF,50V,Electrolytic 0.022 µF,25V 2.2 µF,50V,Electrolytic 0.022 µF,50V 0.001 µF,50V 1 µF,50V,Electrolytic 27 pF (UJ),50V 1 µF,50V,Electrolytic 0.018 µF,16V 10 µF,16V,Electrolytic 12 pF (CH),50V 15 pF (CH),50V 0.01 µF,16V 330 pF,50V 0.022 µF,25V 0.001 µF,50V 47 µF,16V,Electrolytic 0.001 µF,50V 1 µF,50V,Electrolytic 47 µF,16V,Electrolytic NO. –2– C395 C396 C397 C398 C399 C602 C605 C606 C607~610 C611,612 C613,614 C615,616 C617 C618 C619,620 C621,622 C623~630 C631,632 C635,636 C641,642 C701 C702 C714 C715 C719 C720,721 C722 C723 C724 C725 C726 C727 C728 C729 C732 C733 C809,810 C811,812 C813,814 C815,816 C817 C818,819 C820 C850 C852 C855 C856 C859 C860 C861 C863,864 C865 C866 C867 C901,902 C903,904 C905 C911~914 C915,916 C917,918 C919,920 C921,922 C923,924 C925 C927~930 C931~934 C935~938 C939,940 C943 C946 C952 C956,957 C958 CK1 CK2 CK3 CK6 CK7 CK8 CK9 CK10,11 CK12 PRICE RANK PARTS CODE VCTYMN1EF223Z VCEAZA1AW107M VCTYMN1EF223Z VCEAZA1AW107M VCTYMN1EF223Z VCEAZA1EW226M VCEAZA1HW475M VCEAZA1CW107M VCQYKA1HM224K VCTYMN1CX152K VCEAZA1HW106M VCKYMN1HB102K VCEAZA1HW225M VCEAZA1HW226M VCEAZA1HW105M VCEAZA1HW106M VCEAZA1HW105M VCKYMN1HB391K VCKYMN1HB102K VCCSPA1HL470J VCEAZA1EW476M VCTYMN1EF223Z VCEAZA1HW476M VCEAZA1HW226M VCEAZA1EW476M VCKYMN1HB102K VCEAZA1HW476M VCCSMN1HL150J VCCSMN1HL180J VCTYMN1EF223Z VCEAZA1AW227M VCKYBT1HB471K VCTYMN1CY103N VCEAZA1HW335M VCTYMN1EF223Z VCEAZA1EW476M VCFYDA1HA224J VCQYKU2AM224K VCFYDA1HA224J VCEAZA1HW107M VCEAZV1JW227M VCEAZA1HW476M VCEAZA1VW107M RC-EZ0060AWZZ VCQYKA1HM473K VCQYKA1HM104K VCKYPA1HB101K VCQYKA1HM102K RC-EZ0060AWZZ VCTYMN1EF223Z VCEAZA1HW226M VCEAZA1EW476M VCKYMN1HB102K VCEAZA1HW105M RC-EZ0029AWZZ RC-EZ0061AWZZ VCEAZA1HW104M VCCSPA1HL470J VCEAZA1HW476M VCEAZA1HW224M VCEAZV2AW107M VCEAZA1HW107M VCQYKA1HM223J VCEAZA1HW476M VCQYKA1HM104K VCQYKA1HM223J VCFYHA1HA104J VCCSPA1HL221J VCEAZA1HW476M VCEAZA1AW107M VCEAZA1EW227M VCEAZV2AW107M VCEAZA1HW104M VCTYPA1CX103K VCFYHA1HA474J VCKYBT1HB102K VCFYDA1HA104J VCFYHA1HA474J RC-EZY475AF1H RC-EZY225AF1H VCFYDA1HA104J RC-EZY225AF1H J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AB AA AB AA AB AB AC AB AA AB AA AB AB AB AB AB AA AA AA AB AA AB AB AB AA AB AA AA AA AC AA AA AB AA AB AB AB AB AC AC AB AC AB AB AA AA AA AB AB AA AB AN AB AA AB AB AE AC AB AB AB AB AB AA AB AB AC AE AB AA AD AA AB AD AB AB AB AB DESCRIPTION 0.022 µF,25V 100 µF,10V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 0.022 µF,25V 22 µF,25V,Electrolytic 4.7 µF,50V,Electrolytic 100 µF,16V,Electrolytic 0.22 µF,50V,Mylar 0.0015 µF,16V 10 µF,50V,Electrolytic 0.001 µF,50V 2.2 µF,50V,Electrolytic 22 µF,50V,Electrolytic 1 µF,50V,Electrolytic 10 µF,50V,Electrolytic 1 µF,50V,Electrolytic 390 pF,50V 0.001 µF,50V 0.0033 µF,16V 47 µF,25V,Electrolytic 0.022 µF,25V 47 µF,50V,Electrolytic 22 µF,50V,Electrolytic 47 µF,25V,Electrolytic 0.001 µF,50V 47 µF,50V,Electrolytic 15 pF,50V 18 pF,50V 0.022 µF,25V 220 µF,10V,Electrolytic 470 pF,50V 0.01 µF,16V 3.3 µF,50V,Electrolytic 0.022 µF,25V 47 µF,25V,Electrolytic 0.22 µF,50V,Polyester 0.22 µF,100V,Mylar 0.22 µF,50V,Polyester 100 µF,50V,Electrolytic 220 µF,63V,Electrolytic 47 µF,50V,Electrolytic 100 µF,35V,Electrolytic 2200 µF,35V,Electrolytic 0.047 µF,50V,Mylar 0.1 µF,50V,Mylar 100 pF,50V 0.001 µF,50V,Mylar 2200 µF,35V,Electrolytic 0.022 µF,25V 22 µF,50V,Electrolytic 47 µF,25V,Electrolytic 0.001 µF,50V 1 µF,50V,Electrolytic 3300 µF,71V,Electrolytic 4700 µF,35V,Electrolytic 0.1 µF,50V,Electrolytic 47 pF,50V 47 µF,50V,Electrolytic 0.22 µF,50V,Electrolytic 100 µF,100V,Electrolytic 100 µF,50V,Electrolytic 0.022 µF,50V,Mylar 47 µF,50V,Electrolytic 0.1 µF,50V,Mylar 0.022 µF,50V,Mylar 0.1 µF,50V,Thin Film 220 pF,50V 47 µF,50V,Electrolytic 100 µF,10V,Electrolytic 220 µF,25V,Electrolytic 100 µF,100V,Electrolytic 0.1 µF,50V,Electrolytic 0.01 µF,16V 0.47 µF,50V,Thin Film 0.001 µF,50V 0.1 µF,50V,Thin Film 0.47 µF,50V,Thin Film 4.7 µF,50V,Electrolytic 2.2 µF,50V,Electrolytic 0.1 µF,50V,Thin Film 2.2 µF,50V,Electrolytic CD-M4000W/CP-M4000 NO. CK13 CK14 CK15 CK16 CK17 CK18 CK19 CK20 CK21 CK22 CK23 CK24~26 CK29,30 CK31 CK33~35 CK41 CK42 CK43,44 CK45,46 CK47,48 CK49,50 CK51,52 CK53 CK72 CS701,702 CS703,704 CS705 CS706,707 CS708,709 CS710 CS711,712 CS713 CT1,2 PRICE RANK PARTS CODE VCTYPA1CX472K VCTYPA1CX102K VCFYDA1HA683J VCFYHA1HA224J VCEAEA1AW227M VCEAEA1CW107M VCTYBT1EF223Z VCFYHA1HA224J VCFYDA1HA683J VCTYPA1CX472K VCKYPA1HB102K VCEAZA1HW225M VCEAZA1HW225M VCFYDA1HA154J VCCSBT1HL470J VCEAZA1CW107M VCTYBT1EF223Z VCEAZA1EW476M RC-EZY225AF1H VCCSPA1HL221J VCCSPA1HL101J VCEAZA1HW105M VCEAZA1HW476M VCEAZA1CW107M VCKYMN1HB271K VCTYMN1CX272K VCTYMN1EF223Z VCEAZA1HW225M VCTYMN1EF223Z VCEAZA1HW225M VCTYMN1CX682K VCTYMN1EF223Z VCTYPA1CX102K DESCRIPTION J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AB AC AB AB AA AC AB AA AA AB AB AB AA AC AA AB AB AA AA AB AB AC AA AA AA AB AA AB AA AA AA 0.0047 µF,16V 0.001 µF,16V 0.068 µF,50V,Polyester 0.22 µF,50V,Thin Film 220 µF,10V,Electrolytic 100 µF,16V,Electrolytic 0.022 µF,25V 0.22 µF,50V,Thin Film 0.068 µF,50V,Polyester 0.0047 µF,16V 0.001 µF,50V 2.2 µF,50V,Electrolytic 2.2 µF,50V,Electrolytic 0.15 µF,50V,Polyester 47 pF,50V 100 µF,16V,Electrolytic 0.022 µF,25V 47 µF,25V,Electrolytic 2.2 µF,50V,Electrolytic 220 pF,50V 100 pF,50V 1 µF,50V,Electrolytic 47 µF,50V,Electrolytic 100 µF,16V,Electrolytic 270 pF,50V 0.0027 µF,16V 0.022 µF,25V 2.2 µF,50V,Electrolytic 0.022 µF,25V 2.2 µF,50V,Electrolytic 0.0068 µF,16V 0.022 µF,25V 0.001 µF,16V J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 0 ohm,Jumper,ø1.4×3.5mm,Ivory 8.2 kohms,1/6W 22 kohms,1/6W 8.2 kohms,1/6W 22 kohms,1/6W 3.3 ohms,1/6W 27 kohms,1/6W 10 kohm,1/8W 330 ohms,1/8W 1 kohm,1/8W 1 kohm,1/6W 15 kohms,1/6W 10 kohm,1/6W 100 ohm,1/6W 220 ohms,1/8W 2.2 kohms,1/8W 10 kohm,1/8W 2.2 kohms,1/6W 8.2 kohms,1/6W 1 kohm,1/6W 680 ohms,1/8W 12 kohms,1/8W 1.2 kohms,1/8W 220 ohms,1/8W 12 kohms,1/6W 470 ohms,1/8W 100 ohm,1/8W 1 ohm,1/4W 3.3 kohms,1/6W 3.3 ohms,1/4W,Fusible 1 kohm,1/8W 1 kohm,1/6W 2.2 kohms,1/8W 3.3 kohms,1/8W 47 kohms,1/8W 4.7 kohms,1/8W 15 kohms,1/6W 15 kohms,1/8W 10 kohm,1/8W 4.7 kohms,1/8W 1 kohm,1/6W 56 ohms,1/6W 56 ohms,1/8W 100 kohm,1/8W 3.9 kohms,1/8W 5.6 kohms,1/8W RESISTORS R1,2 R3 R4,5 R6 R9 R10 R11 R12 R13~17 R18 R19 R20 R22 R23 R24,25 R26,27 R28,29 R30 R31~38 R39,40 R41 R42 R43 R44 R45,46 R47 R49 R65 1 R80 R101 R102 R103,104 R105,106 R107,108 R109,110 R111 R112 R113,114 R115 R117,118 R119 R120 R121,122 R123,124 R125,126 VRD-MN2BD000C VRD-ST2CD822J VRD-ST2CD223J VRD-ST2CD822J VRD-ST2CD223J VRD-ST2CD3R3J VRD-ST2CD273J VRD-MN2BD103J VRD-MN2BD331J VRD-MN2BD102J VRD-ST2CD102J VRD-ST2CD153J VRD-ST2CD103J VRD-ST2CD101J VRD-MN2BD221J VRD-MN2BD222J VRD-MN2BD103J VRD-ST2CD222J VRD-ST2CD822J VRD-ST2CD102J VRD-MN2BD681J VRD-MN2BD123J VRD-MN2BD122J VRD-MN2BD221J VRD-ST2CD123J VRD-MN2BD471J VRD-MN2BD101J VRD-ST2EE1R0J VRD-ST2CD332J VRG-ST2EG3R3J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD222J VRD-MN2BD332J VRD-MN2BD473J VRD-MN2BD472J VRD-ST2CD153J VRD-MN2BD153J VRD-MN2BD103J VRD-MN2BD472J VRD-ST2CD102J VRD-ST2CD560J VRD-MN2BD560J VRD-MN2BD104J VRD-MN2BD392J VRD-MN2BD562J NO. R131,132 R134 R135,136 R137,138 R139,140 R141,142 R145,146 R153 R154 R155 R156 R157 R158 R160 R162 R164 R166 R167 R168 R169~174 R302 R309 R311 R313 R314 R316 R322 R323 R325 R327 R336 R350 R351 R352 R353 R355 R356 R357 R358 R359 R360 R361,362 R363,364 R365 R368 R372~374 R375 R376 R377 R378 R379 R380 R381 R382 R383 R384 R385 R387 R388 R391,392 R393 R395 R605,606 R607,608 R609,610 R611,612 R613,614 R615,616 R617,618 R619,620 R621,622 R623,624 R625~627 R631,632 R633,634 R637,638 R700 R701 R702 R703 R704 R705 –3– PRICE RANK PARTS CODE VRD-MN2BD123J VRD-MN2BD683J VRD-MN2BD472J VRD-MN2BD682J VRD-MN2BD152J VRD-MN2BD101J VRD-MN2BD103J VRD-MN2BD103J VRD-ST2CD103J VRD-ST2EE151J VRD-MN2BD224J VRD-ST2CD224J VRD-ST2EE221J VRD-ST2EE820J VRD-MN2BD473J VRD-ST2CD472J VRD-MN2BD223J VRD-MN2BD473J VRD-ST2CD4R7J VRD-MN2BD102J VRD-MN2BD100J VRD-ST2CD103J VRD-MN2BD104J VRD-MN2BD333J VRD-ST2CD220J VRD-MN2BD472J VRD-MN2BD681J VRD-MN2BD683J VRD-MN2BD473J VRD-MN2BD330J VRD-MN2BD103J VRD-MN2BD272J VRD-MN2BD562J VRD-MN2BD102J VRD-MN2BD271J VRD-MN2BD332J VRD-MN2BD102J VRD-ST2CD474J VRD-ST2CD392J VRD-MN2BD182J VRD-MN2BD472J VRD-MN2BD332J VRD-ST2CD682J VRD-MN2BD103J VRD-ST2CD223J VRD-MN2BD102J VRD-ST2CD471J VRD-MN2BD102J VRD-MN2BD473J VRD-MN2BD102J VRD-MN2BD222J VRD-MN2BD152J VRD-MN2BD103J VRD-ST2EE151J VRD-MN2BD562J VRD-ST2CD562J VRD-MN2BD562J VRD-ST2CD562J VRD-MN2BD392J VRD-ST2EE271J VRD-MN2BD102J VRD-MN2BD473J VRD-MN2BD392J VRD-MN2BD103J VRD-ST2CD331J VRD-MN2BD152J VRD-MN2BD221J VRD-MN2BD222J VRD-MN2BD472J VRD-MN2BD223J VRD-MN2BD222J VRD-ST2CD472J VRD-ST2CD102J VRD-MN2BD822J VRD-MN2BD393J VRD-MN2BD474J VRD-MN2BD103J VRD-MN2BD104J VRD-ST2CD102J VRD-ST2CD103J VRD-MN2BD104J VRD-ST2CD102J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 12 kohms,1/8W 68 kohms,1/8W 4.7 kohms,1/8W 6.8 kohms,1/8W 1.5 kohms,1/8W 100 ohm,1/8W 10 kohm,1/8W 10 kohm,1/8W 10 kohm,1/6W 150 ohms,1/4W 220 kohms,1/8W 220 kohms,1/6W 220 ohms,1/4W 82 ohms,1/4W 47 kohms,1/8W 4.7 kohms,1/6W 22 kohms,1/8W 47 kohms,1/8W 4.7 ohms,1/6W 1 kohm,1/8W 10 ohm,1/8W 10 kohm,1/6W 100 kohm,1/8W 33 kohms,1/8W 22 ohms,1/6W 4.7 kohms,1/8W 680 ohms,1/8W 68 kohms,1/8W 47 kohms,1/8W 33 ohms,1/8W 10 kohm,1/8W 2.7 kohms,1/8W 5.6 kohms,1/8W 1 kohm,1/8W 270 ohms,1/8W 3.3 kohms,1/8W 1 kohm,1/8W 470 kohms,1/6W 3.9 kohms,1/6W 1.8 kohms,1/8W 4.7 kohms,1/8W 3.3 kohms,1/8W 6.8 kohms,1/6W 10 kohm,1/8W 22 kohms,1/6W 1 kohm,1/8W 470 ohms,1/6W 1 kohm,1/8W 47 kohms,1/8W 1 kohm,1/8W 2.2 kohms,1/8W 1.5 kohms,1/8W 10 kohm,1/8W 150 ohms,1/4W 5.6 kohms,1/8W 5.6 kohms,1/6W 5.6 kohms,1/8W 5.6 kohms,1/6W 3.9 kohms,1/8W 270 ohms,1/4W 1 kohm,1/8W 47 kohms,1/8W 3.9 kohms,1/8W 10 kohm,1/8W 330 ohms,1/6W 1.5 kohms,1/8W 220 ohms,1/8W 2.2 kohms,1/8W 4.7 kohms,1/8W 22 kohms,1/8W 2.2 kohms,1/8W 4.7 kohms,1/6W 1 kohm,1/6W 8.2 kohms,1/8W 39 kohms,1/8W 470 kohms,1/8W 10 kohm,1/8W 100 kohm,1/8W 1 kohm,1/6W 10 kohm,1/6W 100 kohm,1/8W 1 kohm,1/6W CD-M4000W/CP-M4000 NO. R706 R708 R713,714 R716 R717,718 R719 R720 R721 R724 R725 R727,728 R736,737 R738~745 R746 R747 R748 R749 R751 R752 R753 R754 R755,756 R757 R758~761 R762 R763~765 R766~768 R769 R770 R771~773 R775~777 R778 R779~782 R783~791 R792,793 R794 R795 R796 R797 R799 R802 R803 R805 R806 R807 R810,811 R819 R852,853 R854 R855 R856 R861 R863 R865 R866 R867 R868,869 R870 R871 R873 R874,875 R878,879 R880 R901,902 R903,904 R905,906 R907,908 R909,910 1 R911,912 R913~916 R917,918 R919,920 R921,922 R923 R925~928 R929,930 R931,932 R933,934 R935,936 R937 R938 R939 PRICE RANK PARTS CODE VRD-ST2CD103J VRD-ST2CD103J VRD-MN2BD103J VRD-MN2BD104J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD103J VRD-ST2CD472J VRD-ST2CD330J VRD-MN2BD103J VRD-MN2BD473J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD182J VRD-ST2CD222J VRD-ST2CD471J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD103J VRD-MN2BD473J VRD-MN2BD104J VRD-MN2BD101J VRD-ST2CD222J VRD-ST2CD123J VRD-ST2EE100J VRD-ST2CD224J VRD-ST2CD473J VRD-ST2EE470J VRD-ST2CD473J VRD-ST2CD223J VRD-ST2CD103J VRD-RT2HD3R3J VRD-ST2EE681J VRD-MN2BD683J VRD-MN2BD333J VRD-ST2EE101J VRD-ST2EE331J VRD-ST2CD104J VRD-MN2BD562J VRD-MN2BD222J VRD-ST2EE103J VRD-MN2BD102J VRD-MN2BD104J VRD-MN2BD223J VRD-MN2BD103J VRD-ST2CD102J VRD-ST2CD563J VRD-ST2CD102J VRD-ST2CD391J VRD-ST2CD563J VRG-ST2EC101J VRN-VV3LAR22J VRN-VV3LAR10J VRD-ST2CD152J VRD-ST2CD182J VRD-ST2CD563J VRD-RT2HD100J VRD-ST2CD563J VRD-RT2HD100J VRD-ST2CD222J VRD-ST2CD473J VRD-ST2CD153J VRD-ST2CD683J VRD-ST2CD222J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AD AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION NO. 10 kohm,1/6W 10 kohm,1/6W 10 kohm,1/8W 100 kohm,1/8W 10 kohm,1/8W 1 kohm,1/6W 10 kohm,1/8W 4.7 kohms,1/6W 33 ohms,1/6W 10 kohm,1/8W 47 kohms,1/8W 10 kohm,1/8W 1 kohm,1/6W 10 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 10 kohm,1/8W 1 kohm,1/8W 10 kohm,1/8W 1.8 kohms,1/8W 2.2 kohms,1/6W 470 ohms,1/6W 10 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 10 kohm,1/8W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/6W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 10 kohm,1/8W 1 kohm,1/6W 10 kohm,1/8W 47 kohms,1/8W 100 kohm,1/8W 100 ohm,1/8W 2.2 kohms,1/6W 12 kohms,1/6W 10 ohm,1/4W 220 kohms,1/6W 47 kohms,1/6W 47 ohms,1/4W 47 kohms,1/6W 22 kohms,1/6W 10 kohm,1/6W 3.3 ohms,1/2W 680 ohms,1/4W 68 kohms,1/8W 33 kohms,1/8W 100 ohm,1/4W 330 ohms,1/4W 100 kohm,1/6W 5.6 kohms,1/8W 2.2 kohms,1/8W 10 kohm,1/4W 1 kohm,1/8W 100 kohm,1/8W 22 kohms,1/8W 10 kohm,1/8W 1 kohm,1/6W 56 kohms,1/6W 1 kohm,1/6W 390 ohms,1/6W 56 kohms,1/6W 100 ohm,1/4W,Fusible 0.22 ohms,3W 0.1 ohm,3W 1.5 kohms,1/6W 1.8 kohms,1/6W 56 kohms,1/6W 10 ohm,1/2W 56 kohms,1/6W 10 ohm,1/2W 2.2 kohms,1/6W 47 kohms,1/6W 15 kohms,1/6W 68 kohms,1/6W 2.2 kohms,1/6W R940 R941,942 R943 R944 R945~948 R949 R950 R951,952 R953,954 RD01 RD02 RD03 RD04 RD05 RD06 RD07 RD08 RD09 RD10 RD11 RD12 RD13 RD14 RD15 RD25 RD26 RD27 RD28 RD29 RD30 RD31 RD32 RD33 RD34 RD35 RD36 RK1 RK2,3 RK4 RK5 RK7 RK8 RK9~11 RK12 RK13 RK14,15 RK36,37 RK38 RK39,40 RK41,42 RK43 RK44,45 RK46 RK47 RK48~50 RL701~705 RL706~708 RS701 RS702 RS703 RS704 RS705 RS706 RS707 RS708 RS709 RS710 RS711 RS712 RS713 RS714 RS715 RS716 RS717 RS718 RS719 RS720 PRICE RANK PARTS CODE VRD-RT2HD221J VRS-VV3DA561J VRS-VV3DA681J VRD-ST2CD333J VRD-RT2HD3R9J VRD-ST2CD474J VRD-ST2CD122J VRD-ST2CD392J VRD-RT2HD100J VRD-MN2BD681J VRD-MN2BD821J VRD-MN2BD102J VRD-MN2BD152J VRD-MN2BD222J VRD-MN2BD272J VRD-MN2BD392J VRD-MN2BD562J VRD-MN2BD103J VRD-MN2BD183J VRD-MN2BD333J VRD-MN2BD104J VRD-MN2BD681J VRD-MN2BD821J VRD-ST2CD184J VRD-MN2BD681J VRD-MN2BD821J VRD-MN2BD102J VRD-MN2BD152J VRD-MN2BD222J VRD-MN2BD272J VRD-MN2BD392J VRD-MN2BD562J VRD-MN2BD103J VRD-MN2BD153J VRD-MN2BD333J VRD-MN2BD104J VRD-ST2CD103J VRD-ST2CD563J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD102J VRD-ST2CD562J VRD-ST2CD102J VRD-ST2CD101J VRD-ST2CD122J VRD-RT2HD101J VRD-ST2CD391J VRD-ST2CD101J VRD-ST2CD102J VRD-ST2CD103J VRD-ST2CD183J VRD-ST2CD682J VRD-ST2CD183J VRD-ST2CD822J VRD-ST2CD103J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD333J VRD-MN2BD103J VRD-MN2BD683J VRD-MN2BD224J VRD-MN2BD123J VRD-MN2BD224J VRD-MN2BD394J VRD-ST2EE271J VRD-MN2BD154J VRD-ST2EE271J VRD-MN2BD104J VRD-MN2BD824J VRD-ST2CD104J VRD-MN2BD225J VRD-MN2BD104J VRD-MN2BD105J VRD-MN2BD474J VRD-MN2BD563J VRD-ST2CD153J VRD-MN2BD184J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J DESCRIPTION AA AC AC AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 220 kohms,1/2W 560 ohms,2W 680 ohms,2W 33 kohms,1/6W 3.9 ohms,1/2W 470 kohms,1/6W 1.2 kohms,1/6W 3.9 kohms,1/6W 10 ohm,1/2W 680 ohms,1/8W 820 ohms,1/8W 1 kohm,1/8W 1.5 kohms,1/8W 2.2 kohms,1/8W 2.7 kohms,1/8W 3.9 kohms,1/8W 5.6 kohms,1/8W 10 kohm,1/8W 18 kohms,1/8W 33 kohms,1/8W 100 kohm,1/8W 680 ohms,1/8W 820 ohms,1/8W 180 kohms,1/6W 680 ohms,1/8W 820 ohms,1/8W 1 kohm,1/8W 1.5 kohms,1/8W 2.2 kohms,1/8W 2.7 kohms,1/8W 3.9 kohms,1/8W 5.6 kohms,1/8W 10 kohm,1/8W 15 kohms,1/8W 33 kohms,1/8W 100 kohm,1/8W 10 kohm,1/6W 56 kohms,1/6W 10 kohm,1/6W 1 kohm,1/6W 1 kohm,1/6W 5.6 kohms,1/6W 1 kohm,1/6W 100 ohm,1/6W 1.2 kohms,1/6W 100 ohm,1/2W 390 ohms,1/6W 100 ohm,1/6W 1 kohm,1/6W 10 kohm,1/6W 18 kohms,1/6W 6.8 kohms,1/6W 18 kohms,1/6W 8.2 kohms,1/6W 10 kohm,1/6W 1 kohm,1/6W 1 kohm,1/8W 33 kohms,1/8W 10 kohm,1/8W 68 kohms,1/8W 220 kohms,1/8W 12 kohms,1/8W 220 kohms,1/8W 390 kohms,1/8W 270 ohms,1/4W 150 kohms,1/8W 270 ohms,1/4W 100 kohm,1/8W 820 kohms,1/8W 100 kohm,1/6W 2.2 Mohms,1/8W 100 kohm,1/8W 1 Mohm,1/8W 470 kohms,1/8W 56 kohms,1/8W 15 kohms,1/6W 180 kohms,1/8W AF Connector Ass’y,6/6Pin Connector Ass’y,6/6Pin OTHER CIRCUITRY PARTS BI4/CNS4 BI11/CNS11 –4– QCNWN1572AWZZ J QCNWN1924AWZZ J CD-M4000W/CP-M4000 NO. BI102/CNS102 BI602/CNS602 BI703/CNS703 BI704/CNS704 BI705/CNS705 BI901/CNS901 BI902/CNS902 BI903/CNS903 CNP1 CNP2 CNP3 CNP3A CNP4 CNP7 CNP8 CNP101 CNP301 CNP601 CNP701 CNP702 CNP704 CNP705 CNP901 CNP902 CNP903 CNP904 CNP905 CNPK1 CNS1A/B CNS2A/B CNS3A/B CNS901 CNS904 1 F801 1 F802,803 1 F804,805 1 F806,807 FC701 FC702 FL701 FW902 JK1 JK601 JK670 JOG701 LG1 1 LG801,802 LG901 M1 M2 M3 PRICE RANK PARTS CODE QCNWN1974AWZZ QCNWN1876AWZZ QCNWN1843AWZZ QCNWN2038AWZZ QCNWN2033AWZZ QCNCW010NAWZZ QCNWN2034AWZZ QCNWN1917AWZZ QCNCM704GAWZZ QCNCM704HAWZZ 92LCONE6P53253 92LCONE6P53254 QCNCM705FAFZZ 92LCONE6P53254 92LCONE9P53254 QCNCM705CAFZZ 92LCONE2P5268 QCNCWZX21AWZZ QCNCWZF21AWZZ QCNCWZY10AWZZ 92LCONE3P53253 92LCONE5P52287 QCNCM010NAWZZ 92LCONE4P5267X 92LCONE8P5267 92LCONE2P53253 92LCONE4P53253 QCNCM705KAWZZ QCNWN1537AWZZ QCNWN1538AWZZ QCNWN1539AWZZ QCNCW010NAWZZ QCNWN1582AWZZ QFS-D502CAWNI QFS-D252CAWNI QFS-D502CAWNI QFS-D202CAWNI QCNWN2035AWZZ QCNWN1845AWZZ VVKBJ11LM02T1 QCNWN1927AWZZ QJAKJ0007AWZZ QSOCJ0224AWZZ QJAKM0004AWZZ QSW-Z0014AWZZ QLUGP0001AWZZ 92LLUG1746A QLUGP0001AWZZ 92LMTR2790CASY 92LMTR1854BASY 92LTWMEN7E6Y J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M901 PINK1 RL901 RX701 SO301 SO901 SW1 SW2 SW3 SW4 SW601 SW701 SW702 SW703 SW709 SW710 SW711 SW712 SW713 SW714 SW715 SW716 SW717 RMOTV0027AWZZ QLUGP0002AWZZ RRLYD0014AWZZ VHLN63H380A-1 QTANC0206AWZZ QTANA0415AWZZ SWMPU10780MLB SWMPU11470MLB SWMPU11470MLB QSW-F9001AW01 QSW-S0024AWZZ 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T J J J J J J J J J J J J J J J J J J J J J J J SW722 SW723 SW724 SW725 SW726 SW727 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T J J J J J J DESCRIPTION AM Connector Ass’y,7/6Pin AH Connector Ass’y,10/10Pin AH Connector Ass’y,9/9Pin Connector Ass’y,3/3Pin Connector Ass’y,4/4Pin AC Socket,13Pin Connector Ass’y,4/4Pin Connector Ass’y,8/8Pin AC Plug,7Pin AC Plug,8Pin AC Plug,6Pin AC Plug,6Pin AB Plug,6Pin AC Plug,6Pin AD Plug,9Pin AA Plug,3Pin AB Plug,2Pin AD Plug,21Pin AF Socket,21Pin AC Socket,10Pin AB Plug,3Pin AC Socket,5Pin AC Plug,13Pin AB Plug,4Pin Socket,8Pin AB Plug,2Pin AB Plug,4Pin AC Plug,10Pin AG Connector Ass’y,7/7Pin AG Connector Ass’y,8/8Pin AE Connector Ass’y,6/6Pin AC Connector,13Pin AC Connector,2Pin AC Fuse,T5A L 250V AC Fuse,T2.5A L 250V AC Fuse,T5A L 250V AC Fuse,2A L 250V Flat Cable,21Pin AE Flat Cable,10Pin BC FL Display Flat Wire,5Pin AF Jack,Mic Jack,Video/AUX AK Jack,Headphones AF Switch,Push Type [Jog,Volume] AC Lug AA Lug Terminal AC Lug BB Motor with Chassis [Spindle] AP Motor with Gear [Sled] AR Motor with Worm Pulley [CD Loading] AM Motor,Air Cooling Fan AB Lug AK Relay AK Remote Sensor,N63H380A AD Terminal,FM Antenna AD Terminal,Speaker AH Switch,Push Type [Open/Close] AE Switch,Push Type [Clamp] AE Switch,Push Type [Disc Number] AD Switch,Leaf Type [Pickup In] AE Switch,Slide Type [Span Selector] AC Switch,Key Type [ON/Stand-by] AC Switch,Key Type [Clock] AC Switch,Key Type [Timer] AC Switch,Key Type [Disc 1] AC Switch,Key Type [Disc 2] AC Switch,Key Type [Disc 3] AC Switch,Key Type [Disc Skip] AC Switch,Key Type [Open/Close] AC Switch,Key Type [Dimmer] AC Switch,Key Type [Monster Bass] AC Switch,Key Type [Equalizer] AC Switch,Key Type [Reverse Mode] AC Switch,Key Type [CD] AC Switch,Key Type [Tape] AC Switch,Key Type [Tuning Down] AC Switch,Key Type [Memory Set] AC Switch,Key Type [Fast Rewind] AC Switch,Key Type [Fast Forward] NO. SW728 SW729 SW730 SW731 SW732 SW733 SW734 1 SW801 PRICE RANK PARTS CODE 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T QSOCE0008AWZZ DESCRIPTION J J J J J J J J AC AC AC AC AC AC AC AH Switch,Key Type [Play] Switch,Key Type [Stop] Switch,Key Type [Reverse Play] Switch,Key Type [REC/Pause] Switch,Key Type [Tuning Up] Switch,Key Type [Video] Switch,Key Type [Tuner] Switch,Slide Type [Voltage Selector] Gear,Middle Gear,Drive Rail,Guide Shaft,Guide Cushion Pickup Unit Ass’y Pickup Unit (Not Replacement Item) Gear,Rack Spring,Rack Screw,ø2.6×6mm Screw,ø2×5mm Screw,ø2×3mm Washer,ø1.5×3.8×0.25mm Motor with Chassis [Spindle] Motor with Gear [Sled] Switch,Leaf Type [Pickup In] CD MECHANISM PARTS 301 302 303 304 305 1 306 306- 1 NGERH0011AWZZ NGERH0012AWZZ MLEVP0080AWZZ NSFTM0020AWFW 92LM-CUSN1524A 92LHPC1LXASY ———— J J J J J J AC AC AC AD AC BD — 306- 2 306- 3 701 702 703 704 M1 M2 SW4 NGERR0043AFZZ MSPRC0961AFZZ XBSSD26P06000 XHBSD20P05000 XBBSD20P03000 LX-WZ1070AFZZ 92LMTR2790CASY 92LMTR1854BASY QSW-F9001AW01 J J J J J J J J J AC AA AA AA AA AA BB AP AD 201 201- 1 92LCAB3754AASY J ———— — 201- 2 201- 3 201- 4 201- 5 201- 6 201- 7 201- 8 201- 9 201-10 201-11 201-12 201-13 201-14 201-15 201-16 201-17 201-18 201-19 201-20 201-21 201-22 201-23 201-24 201-25 201-26 201-27 201-28 201-29 201-30 201-31 201-32 201-33 201-34 202 202- 1 GDORF0097AWSA GDORF0098AWSA GCOVA1352AWSA GCOVA1384AWSA HDECQ0670AWSA HDECQ0671AWSA HDECQ0784AWSA JKNBZ0820AWSA JKNBZ0766AWSA JKNBZ0768AWSA HDECQ0674AWSA JKNBZ0800AWSA JKNBZ0801AWSA MLIFP0008AWZZ JKNBZ0834AWSA 92LBADGE1671A GCOVA1339AWSA GCOVA1380AWSA GCOVA1381AWSA LHLDZ1327AWZZ MLOKC0006AWZZ MLOKC0007AWZZ LHLDZ1328AWZZ GCOVA1382AWSA GCOVA1344AWSA GCOVA1345AWSA GCOVA1346AWSA GCOVA1394AWSA MSPRC0029AWFJ JKNBK0084AWSA GCOVA1404AWSA MSPRD0167AWFJ MSPRD0168AWFJ 92LCAB3552BASY ———— 202- 2 203 203- 1 PCUSG0022AWZZ J 92LCAB3552CASY J ———— AB AM — 203- 2 204 206 207 PCUSG0022AWZZ GCAB-1192AWSA GCOVA1338AWSA GITAR0792AWSA J J J J AB AN AH 207 GITAR0854AWSA J CABINET PARTS –5– J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AE AE AH AK AE AE AE AG AE AE AF AG AD AC AB AB AB AE AB AB AC AB AB AB AB AD AB AE AB AB AM — Front Cabinet Ass’y Front Panel (Not Replacement Item) Holder,Cassette [Tape 1] Holder,Cassette [Tape 2] Cover,Cassette [Tape 1] Cover,Cassette [Tape 2] Panel,Cassette [Tape 1] Panel,Cassette [Tape 2] Panel,Amp. Button,ON/Stand-by Button,Dimmer/Tuning Button,Function Volume Ring Button,Disc Control Button,Center Operation Damper Button,Equalizer/Monster Bass Badge,SHARP Cover,LED,Power Cover,LED,A Cover,LED,B Holder,Button Block Lock Lever,Cassette [Tape 1] Lock Lever,Cassette [Tape 2] Holder,Cassette Lock Cover,LED,C Cover,Disc No.LED,A Cover,Disc No.LED,B Cover,Disc No.LED,C Cover,Remote Control Sensor Spring,Cassette Lock Button,Volume Cover,Monster Button Spring,Cassette [Tape 1] Spring,Cassette [Tape 2] Side Panel Ass’y,Left Side Panel,Left (Not Replacement Item) Cushion,Leg Side Panel Ass’y,Right Side Panel,Right (Not Replacement Item) Cushion,Leg Top Cabinet Cover,CD Tray Rear Panel [Except for Philippines/russia] Rear Panel [For Philippines] CD-M4000W/CP-M4000 NO. 207 209 210 211 212 213 214 215 218 219 220 221 1 222 1 222 1 222 223 1 224 225 226 227 228 229 230 231 231- 1 231- 2 231- 3 231- 4 231- 5 232 233 235 236 237 238 239 241 242 243 244 245 246 247 248 250 251 252 253 254 256 257 258 258- 1 258- 2 258- 3 258- 4 258- 5 258- 6 258- 7 258- 8 258- 9 258-10 258-11 259 260 261 PRICE RANK PARTS CODE GITAR0855AWSA LANGK0057AWFW LANGK0058AWFW LANGK0239AWFW LBSHC0002AWZZ LCHSM0139AWFW LHLDZ1332AWZZ QCNWN2030AWZZ NFANP0001AWZZ PCUSG0022AWZZ PRDAR0224AWFW PRDAR0158AWFW QACCA0003AW00 QACCE0008AW00 QACCL0005AW00 QCNWN1844AWZZ QFSHD0001AWZZ 92LBE231616 92LCSPR1431C 92LEVA0330702 92LMAG0104302 92LMT0304302 92LNBAND1318A TWPT0312005 92LPT0312005 92LSP0304303 92LPT0304304 92LNM0305401 92LPT0305413 92LPT0303002 92LPT0304303 92LPT0304305 92LPT0304306 92LPT0304307 92LPT0304308 92LPT0304309 92LPT0309506 92LPT0309507 92LPT0309508 92LPT0309509 92LPT0309510 92LPT0309511 92LPT0311101 92LPT0311102 92LPT0320201 92LPT0330301 92LPT0330803 92LPT0331003 92LPT0331105 92LSP0304305 92LSP0304306 KMECB0019AWZZ 92PF513-853 92PF525-336 92PF567-677 92PFF19N-21 92PF514-133 92PF19S-31 92PFF19N-11 92PF522-061 92PFF19S-52 92PF513-861 92PF522-063 92LCAUT1706A1 92LCAUT1706B TSPC-0963AWZZ J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 261 TSPC-0964AWZZ J 262 263 264 265 266 267 601 603 604 605 606 607 JKNBK0012AWSG LHLDZ1320AWZZ LHLDK9001AW00 LANGF0055AWFW LHLDF1019AWSA HDECP0070AWSA LX-BZ2222AXZZ LX-JZ0010AFFD LX-LZ0006AWZZ XBBSD20P04000 XEBSD30P10000 XEBSD30P12000 J J J J J J J J J J J J AE AE AF AD AD AD AB AK AL AG AN AC AB AD AA AD AE AB AA AL AB AB AB AG AB AB AE AG AC AB AB AD AD AD AD AE AD AB AC AE AU AK AT AM AB AB BH BL AV AR AE AL AL AL AZ AL AG AZ AC AA AK AC AB AB AA AC AA AA AA DESCRIPTION NO. Rear Panel [For Russia] Bracket,Main Heat Sink [Left] Bracket,Main Heat Sink [Right] Bracket,Fan Support Bushing,AC Power Supply Cord Chassis,Main Holder,FL Display Lug Wire Rotary Fan Cushion,Leg Heat Sink,Main Heat Sink,Sub AC Power Supply Cord AC Power Supply Cord AC Power Supply Cord Lug Wire Holder,Fuse Belt Spring,Ring Velvet Carpet,Chassis Magnet Plate,Metal Nylon Band,80mm Cam Gear Ass’y Gear,Cam Spring,Stopper Stopper Velvet Carpet Cam Gear Lower Roller Lever,Stop Lever,Lock Stabilizer Support,Cam Lock Gear Pin Cap,Pulley Stopper Gear,Turntable Drive Gear,Open/Close Drive Gear,Planet Gear,Drive Gear,Pulley Gear,Middle Lever,Clamp Lever,Disc Support,Stabilizer Chassis,Loading CD,Chassis Shassis,Slide Turntable Spring,Lock Spring,Lock Gear Tape Mechanism Ass’y Head Plate Block [Tape 2] Motor with Pulley [Tape] Tape Mechanism PWB Ass’y Belt,Main [Tape 2] Pinch Roller Belt,FF/REW [Tape 2] Belt,Main [Tape 1] Clutch Ass’y Block [Tape 1] Belt,FF/REW [Tape 1] Head Plate Block [Tape 1] Clutch Ass’y Block [Tape 2] Label,Class 3 Label,Laser Label,Specification [For Thailand] Label,Specification [Except for Thailand] Knob,Karaoke Holder,Disc No.LED Holder,CD Digital Output Bracket,Power PWB Support Holder,Main PWB Support Sheet,Side Cabinet Screw,Special Screw,ø3×10mm Push Rivet Screw,ø2×4mm Screw,ø3×10mm Screw,ø3×12mm –6– 608 609 610 611 612 613 614 615 616 618 619 620 621 PRICE RANK PARTS CODE XESSD30P10000 XHBSD30P06000 XJBSD30P10000 XJBSD30P14000 XJBSF30P10000 XJSSD30P10000 92LSC0308MBZI 92LSC0308RBZI XHBSD40P08000 XEBSD26P10000 XEBSD26P08000 XEBSD30P08000 LX-EZ0010AWFD J J J J J J J J J J J J J AA AA AA AA AA AA AB AB AA AA AA AA AA DESCRIPTION Screw,ø3×10mm Screw,ø3×6mm Screw,ø3×10mm Screw,ø3×14mm Screw,ø3×10mm Screw,ø3×10mm Screw,ø3×8mm Screw,ø3×8mm Screw,ø4×8mm Screw,ø2.6×10mm Screw,ø2.6×8mm Screw,ø3×8mm Screw,Special ACCESSORIES/PACKING PARTS 1 1 QANTL0008AWZZ QPLGA0003AWZZ QPLGA0004AWZZ SPAKA0319AWZZ SPAKC1283AWZZ J J J J J SPAKC1284AWZZ J SPAKP0032AWZZ SSAKA0007AWZZ TCAUS0019AWZZ TCAUZ0035AWZZ TCAUZ0110AWZZ TGANE0011AW82 TINST0109AWZZ TINSZ0723AWZZ J J J J J J J J TINSZ0724AWZZ J TINSZ0725AWZZ TLABB0001AWZZ TLABE0591AWZZ J J J TLABE0592AWZZ J TLABJ0003AWZZ TLABN0112AWZZ TLABR1219AWZZ TLABS0100AWZZ TLABS0102AWZZ TLABZ0838AWZZ TLABZ0986AWZZ J J J J J J J TLABZ0987AWZZ J TLABZ0988AWZZ 92LBAG760C 92LFANT1746A 92LGCARD1266E1 92LLABL1204C 92LLABL1507B 92LPANEL713A RRMCG0304AWSA UBATU0001AWZZ J J J J J J J J J AH AM Loop Antenna AF Adaptor,AC Plug AF Adaptor,AC Plug Packing Add. Packing Case [Except for Australia/New Zealand] Packing Case [For Australia/New Zealand] AF Miramat Bag,Unit AB Polyethylene Bag,Accessories AD Label,Warning [For Thailand] AB Sheet,Caution Sheet,Approval [For Russia] Warranty Card [For Philippines] Operation Manual [For Thailand] Operation Manual [Except for Australia/New Zealand/Russia/Thaland] Operation Manual [For Australia/New Zealand] Operation Manual [For Russia] AB Label,Japan [For Set] AB Label,Bar Code [For Asia/Middle and Near East/Africa] Label,Bar Code [For Australia/New Zealand] AB Label,Japan [For Packing Case] AA Label,Serial Number Label,Bar Code AB Label,Gost Rostest AB Label,Gost Rostest AB Label,FDA Label,Feature [Tape 1] [Except for Australia/New Zealand] Label,Feature [Tape1] [For Australia/New Zealand] Label,Feature [Tape 2] AA Polyethylene Bag,AC Plug AD FM Antenna AC Warranty Card AA Label,MADE IN MALAYSIA AA Label,Made in Malaysia AB Panel,Made in Malaysia Remote Control AE Battery Lid,Remote Control P.W.B. ASSEMBLY (Not Replacement Item) PWB-A PWB-B1~3 92LPWB3754MANS J 92LPWB3754DPLS J PWB-C 1 PWB-D1~3 92LPWB3552CDUS J 92LPWB3754PWRS J PWB-E PWB-F PWB-G PWB-H 92LPC99C017 92PF567-649 QPWBF0027AWZZ 92LPWB3553MICS — — J J J J Main Display/Headphones/Monster Bass (Combined Ass’y) — CD Servo — Power/Amp./Transformer (Combined Ass’y) AE CD Loading Motor (PWB Only) — Tape Mechanism AD CD Motor (PWB Only) — Mic J AZ OTHER SERVICE PART UDSKA0004AFZZ CD Pickup Lens Cleaner CD-M4000W/CP-M4000 NO. PRICE RANK PARTS CODE DESCRIPTION NO. CP-M4000 SPEAKER BOX PARTS 901 901 902 903 903 904 904 905 905 906 907 908 909 909-1 909-2 HPNLS1035AWSA HPNLS1034AWSA CWAKP1053AWSA GBOXS4007AWSA GBOXS2007AWSA HDECQ0767AWSA HDECQ0779AWSA HDECQ0770AWSA HDECQ0796AWSA HDECA0011AWSA HDECA0012AWSA TSPC-0932AWZZ QCNWN2049AWZZ ———— ———— 909-3 ———— 909-4 910 911 920 921 922 923 SP1,2 SP3,4 SP5,6 SP7,8 ———— PCUSG0022AWZZ LHLDZ8001AWSA XJBSD40P20000 XJBSD60P20000 XJBSD30P12000 XJBSD30P10000 RSPA20001AW6W RSPA00026AW6S RSPA00027AW6T LHLDZ1369AWM1 J J J J J J J J J J J J J — — — J J J J J J J J J J — AB AD AA AA AA Front Panel,Left Front Panel,Right Net Ass'y Speaker Box Ass'y,Left Speaker Box Ass'y,Right Super Tweeter Cover,Left Super Tweeter Cover,Right Super Tweeter Ring,Left Super Tweeter Ring,Right Decoration Bar,Left Decoration Bar,Right Label,Specification Crossover Network Ass’y Crossover Network Tweeter Cord (With Capacitor C1,2) Midrange Cord (With Capacitor C3,4) Screw,Special Foot Cushion Catching Holder Screw,ø4×20mm Screw,ø6×20mm Screw,ø3×12mm Screw,ø3×10mm Woofer Midrange Tweeter Super Tweeter PACKING PARTS SSAKH0068AWZZ SPAKZ0789AWZZ SPAKA0320AWZZ SPAKA0323AWZZ SPAKC1285AWZZ J J J J J Polyethylene Bag,Speaker Miramat Sheet,Speaker Packing Add,Left Packing Add,Right Packing Case,Speaker –7– PARTS CODE PRICE RANK DESCRIPTION CD-M4000W/CP-M4000 CD-M4000W 701 306 A 304 306-2 701 306-1 B 704 306-3 302 C 301 702 303 D 703x2 E M1 F 305 M2 305x2 G SW4 PWB-G H 1 2 3 4 Figure 8 CD MECHANISM EXPLODED VIEW –8– 5 6 CD-M4000W/CP-M4000 CD-M4000W 266 202-1 BELT CONNECTION 603x2 620 202 207 FF/REW ROLLER ASS'Y Tape Motor FF/REW ROLLER ASS'Y 610x11 264 610 610x2 A FLYWHEEL FLYWHEEL ASS'Y ASS'Y TAPE2 MAIN BELT TAPE1 612x2 261 603 M901 610x3 Q852 226 223 610x2 B 221 PWB-A Silicon Grease 202-2 Q850 Q851 605x2 218 610 211 610x2 603 611x2 220 258 606x11 258-1~258-11 PWB-B1 609 Silicon Grease 210 IC901 223 603 C PWB-F 610x2 609 608x5 214 215 FL701 201-10 263 201-19 201-14 209 PWB-B3 222 603 609x2 201-21 212 618 D 201 PWB-B2 201-25 201-20 201-9 616x4 601 608 PWB-D2 201-17 201-18 201-26 201-11 201-29 619 201-24 603 201-28 201-1 E 604 201-27 201-32 T801 604 604 201-22 201-16 201-13 621 603 201-30 201-12 201-15 262 601 PWB-D3 201-23 201-30 PWB-H 608 603x2 PWB-D1 224x6 201-31 201-24 F 619 201-15 610 201-8 224x8 265 613 201-2 G 201-4 267 219x2 201-33 213 201-6 203-1 201-3 201-5 201-7 203-2 201-34 H 230 Note: Only the unit and consumable parts are supplied as parts supply for the Tape mechanism. 1 2 3 4 Figure 9 CABINET EXPLODED VIEW (1/2) –9– 5 203 610x2 6 CD-M4000W/CP-M4000 CD-M4000W 607x2 204 A 250 229 B 228 236 254 614 259 237 C 607x2 231-1 231 231-2 231-3 231-4 CD MECHANISM D 231-5 260 252 242 E PWB-E PWB-E 243x4 M3 244 239 248 245 SW3 SW1 SW2 241 PWB-C 225 246 232 M3 232 232 247 253 F 256 615 235 227 232x4 251 G 233 206 257 238 H 1 2 3 4 Figure 10 CABINET EXPLODED VIEW (2/2) – 10 – 5 6 CD-M4000W/CP-M4000 CP-M4000 921x2 921x2 A 906 907 901 923x2 SP7,8 922x2 B 911x4 920x4 922x4 C 903 908 902 910x2 905 904 D SP1,2 920x4 E 922x4 SP5,6 922x4 909-1 909-4 (C1,2) 910x2 SP3,4 SP1,2 WOOFER F 909-2 909-3 909 (with Capacitor) SP3,4 MIDRANGE (C3,4) SP5,6 TWEETER SP7,8 SUPER TWEETER SP7,8 SUPER TWEETER G SP5,6 TWEETER BK BK YL RD BK YL H RD CROSSOVER NETWORK 1 BK BK C3,4 Capacitor (N.P.) 6.8µF,250V BL BK SP3,4 MIDRANGE BK C1,2 Capacitor (N.P.) 2.2µF,100V SP1,2 WOOFER C1,2 Capacitor (N.P.) 2.2µF,100V Electrolytic C3,4 Capacitor (N.P.) 6.8µF,250V Electrolytic CROSSOVER NETWORK RD BK 2 3 4 Figure 11 SPEAKER EXPLODED VIEW – 11 – 5 6 CD-M4000W/CP-M4000 –– MEMO –– – 12 – CD-M4000W/CP-M4000 COPYRIGHT © 2001 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. SHARP CORPORATION AV Systems Group Audio Systems Division Higashihiroshima, Hiroshima 739-0192, Japan Printed in Japan A0109-1463DS•HA•M SA • SZ • EX