Download Sharp CD-E700H Service manual
Transcript
CD-E700/CD-E77 SERVICE MANUAL No. S1301CDE700// MINI COMPONENT SYSTEM MODEL CD-E700 CD-E700 Mini Component System consisting of CD-E700 (main unit) and CP-E700 (speaker system). Illustration: CD-E700/CD-E77 MINI COMPONENT SYSTEM MODEL CD-E77 CD-E77 Mini Component System consisting of CD-E77 (main unit) and CP-E77 (speaker system). • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used. CONTENTS Page IMPORTANT SERVICE NOTES (FOR U.S.A. ONLY) ....................................................................................................... 2 SPECIFICATIONS ............................................................................................................................................................. 3 NAMES OF PARTS ........................................................................................................................................................... 4 DISASSEMBLY .................................................................................................................................................................. 6 REMOVING AND REINSTALLING THE MAIN PARTS ..................................................................................................... 9 ADJUSTMENT ................................................................................................................................................................. 10 NOTES ON SCHEMATIC DIAGRAM .............................................................................................................................. 14 TYPES OF TRANSISTOR AND LED ............................................................................................................................... 14 BLOCK DIAGRAM ........................................................................................................................................................... 15 SCHEMATIC DIAGRAM / WIRING SIDE OF P.W.BOARD ............................................................................................. 18 VOLTAGE ........................................................................................................................................................................ 35 WAVEFORMS OF CD CIRCUIT ...................................................................................................................................... 36 TROUBLESHOOTING ..................................................................................................................................................... 37 FUNCTION TABLE OF IC ................................................................................................................................................ 41 FL DISPLAY ..................................................................................................................................................................... 47 REPLACEMENT PARTS LIST/EXPLODED VIEW PACKING OF THE SET (FOR U.S.A. ONLY) SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without notice. CD-E700/CD-E77 IMPORTANT SERVICE NOTES (FOR U.S.A. ONLY) BEFORE RETURNING THE AUDIO PRODUCT (Fire & Shock Hazard) Before returning the audio product to the user, perform the following safety checks. 1. Inspect all lead dress to make certain that leads are not pinched or that hardware is not lodged between the chassis and other metal parts in the audio product. 2. Inspect all protective devices such as insulating materials, cabinet, terminal board, adjustment and compartment covers or shields, mechanical insulators etc. 3. To be sure that no shock hazard exists, check for leakage current in the following manner. * Plug the AC line cord directly into a 120 volt AC outlet. * Using two clip leads, connect a 1.5 kohm, 10 watt resistor paralleled by a 0.15 µF capacitor in series with all exposed metal cabinet parts and a known earth ground, such as conduit or electrical ground connected to earth ground. * Use a VTVM or VOM with 1000 ohm per volt, or higher, sensitivity to measure the AC voltage drop across the resistor (See diagram). * Connect the resistor connection to all exposed metal parts having a return path to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor. VTVM AC SCALE 1.5 kohms 10 W 0.15 µF TEST PROBE TO EXPOSED METAL PARTS CONNECT TO KNOWN EARTH GROUND All check must be repeated with the AC line cord plug connection reversed. Any reading of 0.3 volt RMS (this corresponds to 0.2 milliamp. AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the audio product to the owner. –2– CD-E700/CD-E77 FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. SPECIFICATIONS CD-E700/CD-E77 (For U.S.A.) CD-E700/CD-E77 (For Canada) General General Power source Power consumption Dimensions Weight Power source Power consumption Dimensions AC 120 V, 60 Hz 110 W Width: 10-5/8" (270 mm) Height: 13" (330 mm) Depth: 13-15/16" (355 mm) 16.1 lbs. (7.3 kg) Weight Output terminals Input terminals Output power Output terminals 125 watts minimum RMS per channel into 6 ohms from 60 Hz to 20 kHz, 10% total harmonic distortion Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Video/Auxiliary (audio signal): 500 mV/47 k ohms Input terminals D/A converter Frequency response Dynamic range Type Signal readout 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz D/A converter Frequency response Dynamic range Frequency range FM: 87.5 - 108 MHz AM: 530 - 1,720 kHz Wow and flutter Frequency response Signal/noise ratio 50 - 14,000 Hz (normal tape) Wow and flutter 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) 0.3 % (WRMS) CP-E700/CP-E77 (For U.S.A.) Maximum input power Rated input power Impedance Dimensions Weight FM: 87.5 - 108 MHz AM: 530 - 1,720 kHz 50 - 14,000 Hz (normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) 0.3 % (WRMS) CP-E700/CP-E77 (For Canada) Type Type 90 dB (1 kHz) Cassette deck Cassette deck Frequency response Signal/noise ratio 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz Tuner 90 dB (1 kHz) Tuner Frequency range RMS: 250 W (125 W + 125 W) (10 % T.H.D.) Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Video/Auxiliary (audio signal): 500 mV/47 k ohms CD player CD player Type Signal readout Width: 270 mm (10-5/8") Height: 330 mm (13") Depth: 355 mm (13-15/16") 7.3 kg (16.1 lbs.) Amplifier Amplifier Output power AC 120 V, 60 Hz 110 W 3-way 4-speaker system with passive radiator Super tweeter 2 2" (5 cm) Tweeter 6-1/2" (16 cm) Woofer 6-1/2" (16 cm) Passive radiator 250 W Maximum input power Rated input power Impedance Dimensions 125 W 6 ohms Width: 10-7/8" (277 mm) Height: 13" (330 mm) Depth: 10-3/4" (273 mm) 9.9 lbs. (4.5 kg)/each Weight 3-way 4-speaker system with passive radiator Super tweeter 2 5 cm (2") Tweeter 16 cm (6-1/2") Woofer 16 cm (6-1/2") Passive radiator 250 W 125 W 6 ohms Width: 277 mm (10-7/8") Height: 330 mm (13") Depth: 273 mm (10-3/4") 4.5 kg (9.9 lbs.)/each Specifications for this model are subject to change without prior notice. –3– CD-E700/CD-E77 NAMES OF PARTS CD-E700/CD-E77 Front panel 1. Disc Tray 2. Timer Set Indicator 3. Memory/Set Button 4. Power On/Stand-by Button 5. Clock Button 6. Timer/Sleep Button 7. Tuning and Time Up Button 8. Tuning and Time Down Button 9. Headphone Jack 10. Tape 2 Record Pause Button 11. Tape 1 Cassette Compartment 12. Equalizer Mode Select Button 13. Extra Bass/Demo Mode Button 14. Volume Control 15. Disc Tray Open/Close Button 16. Disc Skip Button 17. Tape 2 Cassette Compartment 18. CD Button 19. Tape (1 2) Button 20. CD or Tape Stop Button 21. CD Track Down or Fast Reverse, Tape 2 Rewind, Tuner Preset Down Button 22. Tuner (Band) Button 23. Video/Auxiliary Button 24. CD Play or Repeat, Tape Play Button 25. CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up Button 1 2 12 3 4 5 6 7 8 9 13 14 15 16 10 11 17 18 19 22 23 20 21 24 25 Display 1. CD Pause Indicator 2. Extra Bass Indicator 3. Disc Number Indicators 4. Tape 2 Record Indicator 5. FM Stereo Mode Indicator 6. FM Stereo Receiving Indicator 7. Timer Play Indicator 8. Sleep Indicator 9. Timer Recording Indicator 10. CD Play Indicator 11. CD Repeat Play Indicator 12. Tape Play Indicator 13. Memory Indicator 1 2 3 4 5 6 78 9 10 11 12 13 Rear panel 3 1. Cooling Fan 2. AC Power Cord 3. FM/AM Loop Antenna Jack 4. Video/Auxiliary (Audio Signal) Input Jacks 5. Speaker Terminals 1 4 5 Note: This product is equipped with a cooling fan inside, which begins to run at a specified volume level for better heat radiation. –4– 2 CD-E700/CD-E77 CD-E700/CD-E77 Remote control 1 1. Remote Control Transmitter 2. Disc Number Select Buttons 3. Program Clear Button 4. CD Memory Button 5. CD Track Down or Fast Reverse, Tape 2 Rewind Button 6. CD Pause Button 7. CD or Tape Stop Button 8. Tape 2 Record Pause Button 9. CD Button 10. Tape (1 2) Button 11. Power On/Stand-by Button 12. CD Random Button 13. Direct Search Buttons 14. Tuner Preset Up and Down Buttons 15. CD Track Up or Fast Forward, Tape 2 Fast Forward Button 16. CD Play or Repeat, Tape Play Button 17. Extra Bass Button 18. Equalizer Mode Select Button 19. Volume Up and Down Buttons 20. Tuner (Band) Button 21. Video/Auxiliary Button 2 11 12 3 4 13 14 15 5 16 6 7 8 9 Buttons with " " mark in the illustration can be operated on the remote control only. 17 18 19 10 20 21 CP-E700/CP-E77 1 1. Super Tweeters 2. Woofer 3. Tweeter 4. Passive Radiator 5. Speaker Wire 2 3 4 5 –5– CD-E700/CD-E77 DISASSEMBLY Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling. 4. Take sufficient care on static electricity of integrated circuits and other circuits when servicing. CD-E700/CD-E77 Top Cabinet Front Panel (A1)x2 ø3x12mm Side Panel (Right) (B1)x2 ø3x10mm (A1)x2 ø3x12mm CD-E700/CD-E77 STEP REMOVAL PROCEDURE FIGURE 1 Top Cabinet 1. Screw ...................... (A1) x4 6-1 2 Side Panel (Left/Right) 1. Screw ...................... (B1) x8 6-1 3 CD Tray Cover/ CD Player Unit 1. Turn on the power supply, .. open the disc tray, take out the CD tray cover, and close. (Note 1) 2. Screw ...................... (C1) x1 3. Hook ........................ (C2) x3 4. Hook ........................ (C3) x2 5. Socket ..................... (C4) x2 6-2 4 Rear Panel with Fan Motor 1. Screw ...................... (D1) x7 2. Socket ..................... (D2) x1 5 Main PWB 1. Screw ...................... 2. Socket ..................... 3. Flat Cable ............... 4. Flat Wire .................. 6 7 8 Front Panel (E1) x3 (E2) x3 (E3) x1 (E4) x1 Side Panel (Left) (B1)x4 ø3x10mm (B1)x2 ø3x10mm Rear Panel Figure 6-1 CD Tray Cover (C4)x2 (C2)x3 CD Servo PWB 6-2 2 6-2, 7-1 7-1 1 1 (C3)x1 2 1. Screw ....................... (F1) x1 2. Hook ......................... (F2) x2 3. Flat Wire ...................(F3) x1 7-1 1. Knob ........................ (G1) x1 2. Screw .................... (G2) x10 3. Flat Cable ............... (G3) x1 7-2 Tape Mechanism 1. Open the cassette holder. .. 2. Screw...................... (H1) x5 7-2 (C1)x1 ø3x10mm Main PWB Fan Motor Lug Wire Display PWB 9 Headphones PWB 1. Screw ....................... (J1) x1 7-2 10 Turntable 1. Hook ........................ (K1) x2 2. Cover ...................... (K2) x1 7-3 11 Loading Tray 1. Turn fully the lock lever in the . arrow direction. 2. Push the loading tray backward to engage the claw with the groove and remove it in the direction of the arrow. .. (L1) x6 6-3 Pull CD Player Unit Rear Panel (C3)x1 (D2)x1 Main PWB 7-4 12 CD Servo PWB (Note 2) 1. Screw ...................... (M1) x2 2. Hook ........................ (M2) x1 3. Socket ..................... (M3) x4 7-5 13 CD Mechanism 1. Hook ........................ (N1) x2 2. Hook ........................ (N2) x2 7-6 (D1)x6 ø3x10mm (E1)x1 ø3x10mm (D1)x1 ø3x10mm (E1)x1 ø3x10mm Figure 6-2 Note 1: How to open the changer manually. (Fig. 6-3) 1. In this state, turn fully the lock lever in the arrow direction through the hole on the loading tray bottom. 2. After that, push forward the Loading tray. Lock Lever Note 2: 1. After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of the connector so as to protect the optical pickup from electrostatic damage. CD Player Unit (Bottom View) Note 3: 1. Be careful not to break the claw of the CD mechanism. 2. When fining back the cam gear assembly, let it lock by front movement. Figure 6-3 –6– CD-E700/CD-E77 (E2)x2 (E3)x1 (L1)x3 Loading Tray (E1)x1 ø3x6mm 3 (F3)x1 Front Panel (E2)x1 2 (F2)x1 (E4)x1 1 Power PWB Transformer PWB Headphones PWB (L1)x3 Main PWB (F2)x1 Figure 7-4 (F1)x1 ø3x10mm (M1)x2 ø3x10mm Figure 7-1 (G3)x1 Front Panel (G1)x1 Loading Tray CD Servo PWB Display PWB (G2)x10 ø3x10mm Tape Mechanism Open (M3)x2 (M2)x1 (H1)x5 ø3x10mm (M3)x2 (J1)x1 ø3x10mm Figure 7-5 Lug Wire Cassette Holder CD Mechanism (N2)x2 Headphones PWB Figure 7-2 (K2)x1 (N1)x1 (N1)x1 Loading Tray Turntable Loading Tray (K1)x2 Figure 7-6 CD Player Unit Figure 7-3 –7– CD-E700/CD-E77 CP-E700/CP-E77 STEP REMOVAL PROCEDURE FIGURE 1 Passive Radiator 1. Screw ...................... (A1) x4 2. Side Panel .............. (A2) x1 3. Screw ...................... (A3) x4 2 Woofer 3 4 8-1 Super Tweeter 8-3 1. Front Panel ............. (B1) x1 2. Screw ...................... (B2) x4 8-2 8-3 Tweeter 1. Screw ...................... (C1) x2 8-3 Super Tweeter 1. Screw ...................... (D1) x4 8-3 Speaker Box (D1)x2 ø3x12mm Tweeter Super Tweeter Speaker Box Passive Radiator (C1)x2 ø3x12mm (D1)x2 ø3x12mm (A2)x1 (A3)x4 ø4x16mm Woofer (B2)x4 ø4x16mm Figure 8-3 (A1)x4 ø4x40mm Figure 8-1 (B1)x1 Screwdriver Speaker Box Driver should be pried away from Speaker Box. Figure 8-2 –8– CD-E700/CD-E77 REMOVING AND REINSTALLING THE MAIN PARTS TAPE MECHANISM SECTION TAPE 2 Perform steps 1 to 6 and 8 of the disassembly method to remove the tape mechanism. Clutch Ass'y Record/Playback Head How to remove the record/playback and erase heads (TAPE 2) (See Fig. 9-1) Erase Head 1. When you remove the screws (A1) x 2 pcs., the recording/ playback head and three-dimensional head of the erasing head can be removed. How to remove the playback head (TAPE 1) (See Fig. 9-2) (A1) x 2 Ø2 x 6mm 1. When you remove the screws (B1) x 2 pcs., the playback head can be removed. Figure 9-1 TAPE 1 Clutch Ass'y How to remove the pinch roller (TAPE 1/2) (See Fig. 9-3) Playback Head 1. Carefully bend the pinch roller pawl in the direction of the arrow <A>, and remove the pinch roller (C1) x 1 pc., in the direction of the arrow <B>. Note: When installing the pinch roller, pay attention to the spring mounting position. How to remove the belt (TAPE 2) (See Fig. 9-4) (B1)x2 Ø2x9mm 1. Remove the main belt (D1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (D2) x 1 pc. Figure 9-2 How to remove the belt (TAPE 1) (See Fig. 9-4) 1. Remove the main belt (E1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (E2) x 1 pc. How to remove the motor (See Fig. 9-5) 1. Remove the screws (F1) x 2 pcs., to remove the motor. Pinch Roller (C1)x1 Pull Tape Motor Pinch Roller <A> Pawl <B> Figure 9-3 Motor TAPE 2 Clutch Ass'y FF/REW Belt (D2)x1 Motor TAPE 2 Main Belt (D1)x1 TAPE 1 Main Belt (E1)x1 (F1) x 2 Ø2.6 x 5mm TAPE 1 Main Belt (D1)x1 Main Belt (E1)x1 Figure 9-5 Figure 9-4 –9– FF/REW Belt (E2)x1 CD-E700/CD-E77 CD MECHANISM SECTION Loading Motor PWB Loading Motor Perform steps 1, 2, 3, 10, 11,12 and 13 of the disassembly method to remove the CD mechanism. Loading Tray How to remove the loading motor (See Fig. 10-1) (A1)x5 1. Bend the hooks (A1) x 5 pcs., to remove the loading motor. Figure 10-1 How to remove the pickup unit (See Fig. 10-2) 1. Remove the stop washer (B1) x 1 pc., to remove the gear (B2) x 1 pc. 2. Remove the screws (B3) x 2 pcs., to remove the shaft (B4) x 1 pc. 3. Remove the pickup. Stop Washer (B1)x1 (B3)x2 ø2.6x6mm Note After removing the connector for the optical pickup from the connector wrap the conductive aluminium foil around the front end of connector so as to protect the optical pickup from electrostatic damage. Pickup Unit CD Mechanism Shaft (B4)x1 Gear (B2)x1 Figure 10-2 ADJUSTMENT • Tape Speed MECHANISM SECTION • Driving Force Check Torque Meter Play: TW-2111 Normal speed Tape 1: Over 80 g Tape 2: Over 80 g • Torque Check Torque Meter Adjusting Point Specified Value Instrument Connection MTT-111 Variable Resistor in motor. 3,000 ± 30 Hz Speaker Terminal (Load resistance: 6 ohms) Specified Value Tape 1 Play: TW-2111 Test Tape Specified Value 30 to 80 g.cm Tape 2 TAPE MECHANISM 30 to 80 g.cm Fast forward: TW-2231 — 70 to 180 g.cm Rewind: TW-2231 — 70 to 180 g.cm Tape Motor Variable Resistor in motor Figure 10-3 – 10 – CD-E700/CD-E77 TUNER SECTION CD SECTION fL: Low-range frequency fH: High-range frequency • AM IF/RF Signal generator: 400 Hz, 30%, AM modulated • Adjustment Since this CD system incorporates the following automatic adjustment functions, readjustment is not needed when replacing the pickup. Therefore, different PWBs and pickups can be combined freely. Each time a disc is changed, these adjustments are performed automatically. Therefore, playback of each disc can be performed under optimum conditions. Test Stage Frequency Frequency Display AM IF 450 kHz 1,720 kHz T351 AM Band Coverage — 530 kHz (fL): T306 *2 1.1 ± 0.1 V 990 kHz (fL): T303 AM Tracking 990 kHz *1. Input: Antenna *2. Input: Antenna Setting/ Instrument Adjusting Connection Parts *1 Items adjusted automatically (1) Offset adjustment (The offset voltage between the head amplifier output and the VREF reference voltage is compensated inside the IC.) * Focus offset adjustment * Tracking offset adjustment (2) Tracking balance adjustment (waveform drawing Fig.11-2 EFBL) (3) Gain adjustment (The gain is compensated inside the IC so that the loop gain at the gain crossover frequency will be 0 dB.) * Focus gain adjustment * Tracking gain adjustment *1 Output: TP302 Output: TP301 • FM RF Signal generator: 1 kHz, 40 kHz dev., FM modulated Setting/ Adjusting Point Test Stage Frequency Frequency Display FM Band Coverage — 87.50 MHz FM RF 98.00 MHz 98.00 MHz (10-30 dB) *1. Input: Antenna *2. Input: Antenna Instrument Connection T301 (fL): 1.3 V ± 0.1 V *1 L312 *2 CD ERROR CODE DESCRIPTION Output: TP301 Output: Speaker terminal Error • FM IF Signal generator: 10.7 MHz, FM modulated Test Stage Frequency Frequency Display IF 10.7 MHz Setting/ Adjusting Point 98 MHz *1. Input: Antenna Instrument Connection T302 *1 (Turn the core of transformer T302 fully counterclock wise) Explanation 01 When Pickup set inner position, inner switch cannot detect 'ON' level for 10 secs. 10* When tray moves to Open/Close, Open/Close switch cannot detect 'ON' level for 7 secs. When disc table rotate to target position. Clamp switch cannot detect 'ON' level for 7 secs. 11* When disc table set to Disc1 position for 1 st time, "CLAMP SW", "DISC NO SW" and "OPEN/CLOSE" cannot detect 'ON' level for 14 secs. 31 When it changes to CD function, DSP cannot read initial data. * 'CHECKING' If Error is detected, 'CHECKING' will be display instead of 'ERCD**' display. 'ER-CD**' display will only be display when error had been detected for the 5 th times. Output: TP301 MAIN PWB T Stopped CH1=500 mV DC 10:1 CH2=200 mV DC 10:1 CH3=1 V DC 10:1 1999/04/05 20:26:47 500 ms/div (500 ms/div) NORM:20 kS/s FM BAND COVERAGE fL T R381 T301 FDO 1 T351 TP301 AM IF IC301 T302 FM IF TE 3 CNP301 AM/FM LOOP ANTENNA 1 FM RF L312 T303 EFBL 2 T306 AM TRACKING fL R356 CH2 v/DIV 200 mV TP302 AM BAND COVERAGE fL =Filter= Smoothing : ON BW : FULL Figure 11-1 ADJUSTMENT POINTS =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100K Zoom : 2k Figure 11-2 – 11 – =Trigger= Mode : SINGLE Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs CD-E700/CD-E77 TEST MODE • Setting the test mode Any one of test mode can be set by pressing several keys as follows. <X-BASS> + <CD> + <POWER> TEST: CD operation test. Function: -CD test mode. -Enter test mode. C D T E S T IL isn't done OPEN/CLOSE operation is using manual. << >>, << >> buttons make pick's slide possible. <<PLAY>> key input. Do TOC IL. Do normal play. When these following key is input into PLAY key, track number can be appoint directly. <<MEMORY>> key input. Adjustment result automatically will display as below. for each 2 sec : a) "FOFF_XX" b) "TOFF_XX" c) "TBAL_XX" d) "TGAN_XX" f) "FGAN_XX" g) "RFLS_XX" explanation: a) Focus off set b) Tracking off set c) Tracking balance d) Tracking Gain f) Focus Gain g) RF level shift = "FOFF_XX" = "TOFF_XX" = "TBAL_XX" = "TGAN_XX" = "FGAN_XX" = "RFLS_XX" <<MEMORY>> key input. Laser ON. <<MEMORY>> key input. Tracking OFF play at that specific point. <<MEMORY>> key input. << << << 1 >> key: Track 4 2>> key: Track 9 3>> key: Track 15 Tracking ON play from that specific point. <<MEMORY>> key input. <<STOP>> key input. Adjustment result automatically will display as below for each 2 sec : a) "FOFF_XX" b) "TOFF_XX" c) "TBAL_XX" d) "TGAN_XX" f) "FGAN_XX" g) "RFLS_XX" STOP <<STOP>> key input. VOL — Last memory BAL — CENTER P.GEQ — FLAT X-BASS — OFF STOP Sliding the PICKUP with << >>, << >> button must only be in STOP mode. To cancel : Power OFF – 12 – CD-E700/CD-E77 Standard Specification of Stereo System Error Message Display Contents Error Contents CD TUN DISPLAY Notes Pickup Mechanism Error. 'ER-CD**' 01: PU-IN SW Detection NG. CD Changer Mechanism Error. 'ER-CD**' (*) 10: Changer Error. 11: Initial Error. CD DSP Communication Error 'ER-CD**' 31: DSP COMMUNICATION ERROR Focus Not Match. 'NO DISC' PLL Unlock. FM 87.5 MHz PLL Unlock. (*) CHECKING: If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**' display 'ER-CD**' will only be display when CD changer mechanism error had been detected for the 5 th times. Speaker abnormal detection and +B PROTECTION display In case speaker abnormal detection or +B PROTECTION had occured, it can be check by pressing 'POWER', 'VIDEO' and 'XBASS' key twice. Display will show "S** B**". S is referring to speaker abnormal detection and B is referring to +B PROTECTION. ** is in hex valve. +B PROTECTION is condition when irregular process occur on power supply line. BEFORE TRANSPORTING THE UNIT The following process need to be taken after set tapering/parts replacement. 1. Press the Power On Button to enter Powre mode. 2. While pressing down the button and the X-Bass/Demo button, press the Power button until "CLEAR AL" appears 3. While pressing down the button and the X-Bass/Demo button , press the Power button until "WAIT" "FINISHED" appears. 4. Unplug the AC cord and the unit is ready for transporting. – 13 – CD-E700/CD-E77 NOTES ON SCHEMATIC DIAGRAM • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means pico-farad and the unit of the capacitor without such a symbol is microfarad. As to electrolytic capacitor, the expression “capacitance/withstand voltage” is used. (CH), (TH), (RH), (UJ): Temperature compensation (ML): Mylar type (P.P.): Polypropylene type • Schematic diagram and Wiring Side of P.W.Board for this model are subject to change for improvement without prior notice. REF. NO SW1 DESCRIPTION OPEN/CLOSE • The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given. 1. In the tuner section, indicates AM indicates FM stereo 2. In the main section, a tape is being played back. 3. In the deck section, a tape is being played back. ( ) indicates the record state. 4. In the power section, a tape is being played back. 5. In the CD section, the CD is stopped. • Parts marked with “ 1 ” ( ) are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. POSITION REF. NO ON—OFF SW712 TUNER ON—OFF VIDEO/AUX ON—OFF ON—OFF DESCRIPTION POSITION SW2 CLAMP ON—OFF SW713 SW3 DISC NUMBER ON—OFF SW714 TAPE SW4 PICKUP IN ON—OFF SW715 STOP ON—OFF SW701 POWER ON—OFF SW716 PLAY ON—OFF SW702 MEMORY SET ON—OFF SW717 FAST FORWARD ON—OFF SW703 REC/PAUSE ON—OFF SW718 FAST REWIND ON—OFF SW704 TUNING DOWN ON—OFF SW721 X-BASS/DEMO ON—OFF SW705 TUNING UP ON—OFF SW722 EQUALIZER ON—OFF SW706 TIMER/SLEEP ON—OFF SW723 OPEN/CLOSE ON—OFF SW707 CLOCK ON—OFF SW724 DISC SKIP ON—OFF SW711 CD ON—OFF TYPES OF TRANSISTOR AND LED FRONT VIEW FRONT VIEW E C B (S) (G) (D) (1) (2) (3) KRC102 M KRC104 M KTA1266 GR KTA1273 Y KTA1274 Y KTA1271 Y KTC3194 Y KTC3199 GR KTC3200 GR KTC3203 Y 304VT2E1 A503BC2E – 14 – 6 7 8 9 10 CNP6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 BI4 5 CNP4 CNS4 4 + O/C, 3 – CLAMP SW 2 M M3 T/T UP DOWN LOADING MOTOR SW2 CLAMP CD RES 1 DISC NO CL 8 DI 7 DO 6 CE D_GND +6.5V (+B7) 5 DRF A5V (+B6) 4 WRQ D5V (+B6) 3 CNP5 L-CH AGND 2 DGND R-CH 1 SW1 OPEN/CLOSE TO DISPLAY SECTION TO MAIN SECTION SW3 DISC NUMBER CD-E700/CD-E77 CONT3 CONT2 CONT4 RCHO 70 71 RVSS 62 CL 25 LVSS 61 CE 42 43 44 45 LCHO Q3 75 69 63 DI 57 64 DO 56 65 VWRQ 55 66 VRES 51 50 67 DRF 43 44 IC1 LC78646E CD SERVO 37 28 19 XL1 16.933 MHz 48 XOUT 40 6 CONT 5 26 49 XIN SLDO 23 79 80 1 +5V +3.3V +3.3V Q2 22 VCC2 30 29 26 IC IC2 LA6574H FOCUS/TRACKING/ SPIN/SLIDE DRIVER 4 5 6 7 M1 SPINDLE MOTOR COIL TRACKING +3.3V Q1 LASER DRIVER 12 FOCUS COIL PICKUP UNIT +5V CONSTANT VOLTAGE 3 SPO 10 SLDO LDS 9 TO TIN2 8 28 27 2 +6.5V TIN1 7 LDD FIN2 RVDD LVDD 41 46 FIN1 5 77 18 47 TD0 20 FD 24 1 7 13 15 FD0 21 XVDD ADAVDD VVDD RFVDD SPDO 22 8 9 10 11 M SW4 PICKUP IN M2 SLIDE MOTOR Figure 15 BLOCK DIAGRAM (1/3) – 15 – M CD-E700/CD-E77 AM IC303 LA1832S FM IF DET./ FM MPX./AM IF IC301 TA7358AP FM FRONT END FM +B4 FM IF 6 1 T302 CF303 CF351 X351 450 kHz 456 kHz T351 CF352 AM IF 1 2 4 5 9 8 17 13 AM MIX AM IF GND FM+B FM VCO MO/ST DET L 14 9 5 7 8 FM L312 RF T301 FM OSC FM/AM IF MPX. 21 7 Q302 AM TRACKING T303 T306 AM BAND COVERAGE X352 4.5 MHZ VT 20 IC302 LC72131 PLL(TUNER) +B3 7 6 FM/AM MO/ST 9 10 21 +B4 TAPE L 10 R 15 TUNER L 11 R 14 1 FROM CD SECTION CNP5 CD 2 3 SWITCHING Q103Q106 23 DI 1 CE 2 CLK 24 IC601 LC75341 AUDIO PROCESSOR 4 L 21 R L NF 3 R NF 22 –20dB ATT Q601 Q602 3 Q107 Q108 MUTING P.B L(T2) 2 R(T2) 23 PB REC/PLAY 5 20 H/N POP REDUCE 6 T1/T2 L REC 9 REC R REC 16 7 L REC 18 R 8 L NF 1 7 R NF REF 14 12 NOR/ HIGH 15 SWITCHING Q105 Q106 +B4 13 21 R 4 L L 12 R 13 7 8 17 18 L(T1) 1 R(T1) 24 TAPE 1 L-CH PB HEAD R-CH AC BIAS 5 JK690 VIDEO IN L L 9 AUX R R 16 BI601 TAPE 2 L-CH REC PB HEAD R-CH 4 FM SOLENOID DRIVER REC P.B. 3 SWITCHING TAPE MECHANISM ASS'Y Q707 Q708 11 17 +B4 Q360 Q706 22 15 16 1 OSC +B FM MOTOR DRIVER +B3 R 15 FM/AM OUT MPXIN FM/AM 12 16 18 STEREO OSC BUFF AM RF IN AM OSC IN 23 DO 4 CLK 3 FM OSC 2 DI B.P.F CE BF301 10.7 MHz T1/T2 19 SWITCHING IC101 AN7345K PLAYBACK AND RECORD /PLAYBACK AMP. 10 ALC T1/T2 Q114 SWITCHING Q112 Q113 BIAS ERASE HEAD BIAS Q111 OSC L103 SWITCHING Q109 Q110 Figure 16 BLOCK DIAGRAM (2/3) – 16 – BIAS CD-E700/CD-E77 FL701 DISPLAY +B4 1 5 12 13 27 41 14 19 45 Q705 +B5 - 86 - 91 VDD RESET - 100 VDD 93 1 2 4 5 6 7 8 10 11 12 13 15 16 1 7 +B5 37 36 35 +B5 AVDD 34 31 KEY SW701-SW707 SW711-SW718 SW721-SW724 29 +B PROTECT 33 - 92 38 IC701 IX0553AW SYSTEM CONTROL MICROCOMPUTER CE CLK DI DO 79 VLOAD 39 - 85 RX701 1 REMOTE SENSOR 3 2 40 VDD 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 70 20 21 22 23 24 +B7 +B5 +B5 XL700 4.194304 MHz +B5 RESET Q709 TO CD SECTION +B3 JK701 HEADPHONES +B6 SP. DET. D905 D906 M901 M FAN MOTOR Q906 SO901 SPEAKER GROUND TERMINAL MAIN Q905 Q901 Q902 Q903 Q904 L R 18 14 VL+ VL– VH+ VH– B T Q601 Q602 2 1 5 6 7 RL914 8 R-OUT 11 L-OUT –B2 IC901 STK41242 POWER AMP. +B2 REC/PLAY D801 –B1 VF1 KIA7812AP IC851 LD+7V KIA7810AP IC852 A+10V KIA7805AP +B6 IC853 IC851,IC852,IC853: +5V KTC2026 IC855 M12 +B4 D804 F804 2A /125V F803 2A/125V D803 VOLTAGE REGULATOR –VF F805 4A/125V +B7 F802 4A/125V F801 4A/125V D802 +B1 +B3 RL841 AC POWER SUPPLY CORD Q801 T1/T2 T.F. VF2 +B5 BIAS IC854 AN78L05 PT801 MAIN POWER TRANSFORMER +5.6V VOLTAGE REGULATOR D842~ D845 PT841 SUB POWER TRANSFORMER Figure 17 BLOCK DIAGRAM (3/3) – 17 – AC120 V, 60 Hz CD-E700/CD-E77 BI601 FM SIGNAL 2 7 8 D_GND LD+7V RECORD SIGNAL +B 6 +B 7 8 CD SIGNAL +B 9 1 L-CH 14 R-CH 16 CD_A_GND 18 C607 0.12 (ML) R607 3.9K 4 C605 0.12(ML) 5 C611 0.0022 6 R614 4.7K C613 1/50 C615 4.7/50 C617 1/50 C619 1/50 7 8 R610 2.2K Q602 KTC3199 GR R616 2.2K 9 10 C621 1/50 R612 390 11 12 R 24 +B VDD 23 VREF + – ROUT LOUT RBASS LBASS LTRE RTRE RIN LIN RSEL0 LSEL0 + – R618 330 CD_D_GND 17 Q601 KTC3199 GR R611 2.2K R615 4.7K CCB INTERFACE + – R619 330 A_GND 15 R617 2.2K CLK CE 3 VSS C603 22/50 C608 0.12(ML) 22 21 20 C606 0.12(ML) 19 18 17 C614 1/50 C616 L4 R4 AUX 16 4.7/50 C618 R3 L3 DECK 1/50 C620 L2 15 R2 TUNER L1 R1 CD 14 1/50 C622 1/50 13 C623 1/50 L C601 220/16 C653 220P DI + – TO POWER SECTION P22 1-F CD_GND 13 2 R613 390 D+5V 12 C609 1/50 R605 10K A_5V 11 R602 1K IC601 LC75341 AUDIO PROCESSOR VIDEO SIGNAL LD+7V 10 CNP5 TO CD SERVO PWB P27 12-D B 5 + – 6 CD_+B R601 1K PLAYBACK SIGNAL + – 5 3 4 CD_GND C651 220P 4 L-CH C652 220P 3 Q603 KTC3199 GR 2 Q604 KTC3199 GR A A_GND + – 1 + – CNS601 R-CH 1 C624 1/50 R608 1.2K C626 0.0022 R609 1.2K C625 0.0022 R621 22K C639 1/50 C640 22/50 R620 22K C D C141 100/16 R149 150 SWITCHING R146 10K R147 10K 8.6V R148 4.7K Q113 KRC104 M 3.4V 0V 2 9.3V 3 0V R136 220K 1 REC_R 1 9.3V Q112 KTA1266 GR 3.4V 0V 3 2 SWITCHING E R139 10K R138 10K Q114 KRC104 M 0.7V SWITCHING 0V 0.7 Q KTC3 Q108 KTC3199 GR M MUTING L Q103 KTC3200 GR R109 4.7K 0.7V 0V R105 3.3K 0V 0.7V 0V 0V 0V R107 47K R103 2.2K 2 3 4 5 6 9 R119 3.9K 22/50 220/10 C133 R123 5.6K R121 12K 5 6 C134 11 13 Vcc ALC Nor/CrO2 ALC RIPPLE C131 47/25 C117 47/25 C115 560P R115 56 Figure 18 SCHEMATIC DIAGRAM (1/10) – 18 – 10 C109 330P IC101 AN7345K PLAYBACK R117 AND 100K RECORD/ C113 PLAYBACK 0.033 AMP. C111 4 56K 15 14 C125 22/50 R111 15K 3 56K 8 7 • NOTES ON SCHEMATIC DIAGRAM can be found on page 14. 2 C132 47/25 16 H 1 R134 10K R132 100 C130 0.0033 C128 0.022 1.5K 270P C124 17 – + Hich=CHROME + – 47/25 Q101 KTC3200 GR R130 C150 47/50 R126 4.7K 18 R135 10K 0V 19 R133 100 C103 180P 20 0.022 1 R113 1K RECORD/ PLAYBACK HEAD 21 0.0033 L C107 330P T2_L2 SWITCHING 22 – 112K + Hich=T1 + 112K – T2_L1 CNP102 23 C127 Q104 24 C126 22/50 C129 7 TAPE2 0V SWITCHING KTC3200 GR T2_R1 0V R128 5.6K R129 5.6K 6 T2_R2 A_GND 0V R106 3.3K 0.7V IC101 AN7345K 1.5K 5 C104 180P ERASE Q106 KTC3199 GR L-CH 2 1 3 4 3 M_GND R110 4.7K R-CH 4 2 SWITCHING 1 6 5 Q105 KTC3199 GR ERASE HEAD R C108 330P C143 3.3/50 0V R127 4.7K R108 47K 0.7V 0V R120 3.9K C110 330P R131 R114 1K R104 2.2K 0V R118 100K R101 1K Q102 KTC3200 GR R124 5.6K C118 47/25 C121 0.022 F C116 560P C123 270P C101 560P C119 0.0022 T1_L C120 0.0022 A_GND 560P 3 C106 2 3 C112 47/25 C114 0.033 C105 560P 1 2 R102 1K C102 560P SWITCHING R-CH L-CH 1 R122 12K R116 56 CNP101 T1_R R150 68K R112 15K TAPE1 PLAYBACK HEAD G R 12 CD-E700/CD-E77 MAIN PWB-A1(1/3) R693 33K C602 0.022 C601 220/16 C653 220P OR +B VDD 23 VREF ROUT RBASS RTRE RIN RSEL0 R4 21 17 16 14 C690 390P +B L-CH JK690 AUX/VIDEO R-CH R692 33K R604 10K CHASSIS C606 0.12(ML) 19 18 R690 6.8K C610 1/50 R606 3.9K 20 15 R1 C603 22/50 C608 0.12(ML) 22 R3 R2 R603 1K C691 390P C612 0.0022 C614 1/50 C616 4.7/50 CE +B C618 1/50 C620 1/50 C622 1/50 13 +B A+10V DGND DI R642 10K C624 1/50 CLK R644 6.8K TUN_R AGND 1 2 3 4 5 6 7 R643 6.8K TUN_L 8 R641 10K +B +B R136 220K REC_L R137 220K REC_R R139 10K R138 10K 9 R608 1.2K C626 0.0022 DO 0.7V 0.7V Q107 KTC3199 GR Q108 KTC3199 GR 0V MUTING C130 0.0033 C132 47/25 0.022 22/50 CE 220/10 1.5K FFC701 C128 0.022 R130 R134 10K R132 100 MUTING DO DI +B 56K 8 9 10 11 13 12 0V R141 2 4.7K R142 82 (1/2W) L103 330 µH 19 20 21 +B A+10V +B M_+13V +B SW_5V SP_DET 22 23 24 25 26 27 SP_RLY SP_DET SW_5V M_+13V –20dB D_GND +B_PROTECT SP_RLY A+10V AGND (AUDIO PRO) TAPE_A_GND BIAS OSC. M_GND C139 0.039(ML) C138 0.0082 R145 4.7 0V Q111 KTC3203 Y 0V C140 47/25 C131 47/25 11 9 CNP701A 8 TO DISPLAY PWB P24 1-F 7 R144 22K R135 10K 12 T_T1/T2 0V REC/PLAY 0V 0.0033 C129 13 T_BIAS R143 47K C137 0.047 (ML) 14 10 3 1 15 S_MUTE 0V SWITCHING R133 100 1.5K 0.022 C127 Q109 KTA1266 GR D_GND Q110 KRC104 M R140 47K 11.6V C125 22/50 R131 BIAS 11.6V 15 14 +B_PROTECT R158 220 Vcc 16 56K ALC Nor/CrO2 ALC RIPPLE 17 – + =CHROME + – C135 C126 22/50 C134 C133 CLK 16 6 5 4 3 2 1 CNP701B 28 TO POWER SECTION P22 1-F 7 8 9 10 Figure 19 SCHEMATIC DIAGRAM (2/10) – 19 – 11 12 TO TUNER SECTION P21 11-H CLK 24 R691 6.8K CD-E700/CD-E77 C302 0.001 A AM TRACKING T306 AM OSC. B C342 0.022 VD301 SVC348S C335 560P C362 3 3/50 DS1SS133 R358 3.9K C308 4.7P (CH) R351 5.6K 1 9 VD302 SVC211C FM BAND COVERAGE fL VD303 SVC211C C313 22P (CH) T301 FM OSC. T302 R309 10K FM IF C312 0.022 1 3 TP301 C389 +B C315 0.0047 R322 680 R382 150 R316 4.7K C318 100P R327 33 C39 1/5 Q302 KTC3194 Y OSC BUFFER C381 12P(CH) 22 21 20 X IN X OUT VSS AOUT CE C317 0.001 C316 0.022 C314 0.0047 E 0.001 C397 0.022 2 R325 47K 0.022 C324 4.7P(UJ) 10/50 C307 10/50 C351 C311 18P R311 100K R314 22 8 7 R302 10 C305 4.7P L312 FM RF D305 DS1SS133 D 6 5 C352 C304 0.01 4 R381 10K 3 CF303 3 2 C306 0.022 3 1 C310 15P(CH) 2 C320 0.001 1 2 1 2 3 C309 0.001 1 24 IC301 TA7358AP FM FRONT END R313 33K FM C303 10P CNP301 AM C R336 10K C334 22P (CH) AM BAND COVERAGE fL BF301 BAND PASS FILTER R323 68K (HB) 0.022 D302 T303 AM ANTENNA C350 DS1SS133 C394 47/25 D301 C332 0.022 R365 10K 0.001 AM OSC OUT FM IF IN C338 C331 0.047 C330 15P (UJ) C323 0.022 I LC X352 4.5 MHz F C382 15P(CH) 2 3 C383 47P +B R375 470 G FM SIGNAL +B AM SIGNAL H • NOTES ON SCHEMATIC DIAGRAM can be found on page 14. 1 2 3 4 Figure 20 SCHEMATIC DIAGRAM (3/10) – 20 – 5 6 R374 1K 1 7 8 9 R393 1K L351 100 µH 14 13 12 10 IC302 LC72131 PLL (TUNER) 11 R376 1K 9 C386 330P R395 47K R353 270 12 C357 R355 2.2/50 3.3K C356 0.001 L-CH OUT PHASE MO/ST (FM/AM) C369 27P 0.001 0.022 2.2/25 C374 R356 1K C361 0.022 R365 10K R357 470K 0.015 C362 3.3/50 0.022 C368 1/50 X351 456 kHz C366 C365 C364 IC303 LA1832S FM IF DET./FM MPX./AM IF C358 1/50 IF OUT PHASE MPX IN R-CH OUT VCC 10 11 C370 1/50 C355 22P FM DET MPX VCO STEREO 9 R388 3.9K C398 100/10 C399 0.022 3 CF351 0.022 8 L352 100 µH R392 270 Q360 KTA1266 GR R360 4.7K +B 1 4 5 9 10 Figure 21 SCHEMATIC DIAGRAM (4/10) – 21 – 2 7 11 3 6 TUN_L 8 7 DGND 19 18 17 16 15 6 15 14 13 TUN_R 7 R387 5.6K 0.001 C354 R352 1K 16 R384 5.6K C380 10/50 17 R359 1.8K SWITCHING C392 0.001 5 SD 20 19 18 A+10V 6 1 C353 0.022 4 R377 47K 2 CF352 T351 AM IF C385 0.01 21 C372 1/50 AGND 5 3 VSM AM LOW CUT AM IF IN FM/AM OUT GND C363 C367 1/50 DO 4 2 AM RF IN FM AFC 3 REG AM OSC IN AM MIX OUT 2 22 C387 0.022 0.022 AM OSC OUT FM IF IN R351 5.6K 23 MO/ST SD IF IN ST IND C393 R380 1/50 1.5K R379 2.2K C350 0.022 10/50 R358 3.9K R350 2.7K CLK 1 AIN DO PD VDD FM/AM IF FM IN CONT AM IN FM/AM CL 22 21 20 R378 1K IC302 LC72131 DI C397 0.022 C394 47/25 C351 1 24 TP302 DI CE R375 470 1K +B R372 C383 47P 1K 2 H) R373 R382 150 R381 10K C389 1K 2 Hz C352 2 22 R374 1 H) X IN X OUT VSS AOUT CE CD-E700/CD-E77 MAIN PWB-A1 (2/3) C373 0.015 C371 1/50 ZD351 DZ5.1BSB C396 100/10 C395 0.022 R391 270 R383 5.6K +B R385 5.6K C391 47/25 C388 0.001 C384 0.001 R386 22K +B 8 P19 12- C TO MAIN SECTION 12 CD-E700/CD-E77 9 8 7 6 5 4 R934 56K R935 56K R937 56K C925 47/50 D905 DS1SS133 R928 39K C921 4700/50 R922 0.1(3W) R908 1K L901 3µH C922 4700/50 L C920 3300/71 C923 3300/71 R929 47K R930 47K R939 R927 39K R902 56K C902 0.1/50 R926 1.5K (1/2W) C919 0.01(ML) R958 100(1/4W)Fusible C901 0.1/50 D907 DS1SS133 R925 1.5K (1/2W) D906 DS1SS133 Q904 KTC3199 GR R904 1K R920 1.8K ZD903 DZ12BSB C918 100/50 C916 100/50 Q902 KTC3199 GR C911 100/100 ZD902 DZ12BSB C917 0.01(ML) R919 1.8K R910 1K R921 1.5K R901 56K R R917 0.1(3W) Q901 KTC3199 GR C904 0.001 1 Q903 KTC3199 GR C915 100/100 C903 0.001 2 L902 3µH C909 0.1(ML) B 3 VH+ 10 VL+ 11 IC901 STK41242 POWER AMP. R916 0.22(3W) 12 R913 0.22(3W) R912 100(1/4W) Fusible 13 C914 100/100 R906 560 R905 560 14 R918 1.5K R909 C910 33K 3.3P(CH) C906 22/50 C905 22/50 R907 56K C908 3.3P(CH) C907 100P R903 1K 15 C913 100P VL– + 16 C912 100/100 17 R911 56K 18 A VH– – – GND + SP_DET D910 1N4004S D909 1N4004S C946 0.1/50 C VH– VL+ VH+ L_CH VL– 14 A_GND 15 R-CH 16 R856 3.3(1/2W) D SP_DET 27 CHASSIS BI801 IC855 KTC2026 SILICON 13V 10 A+10V F TO MAIN SECTION P18 1-B, P19 10-H 22 +B C865 10/50 ZD852 DZ8.2BSB +B R961 1 D857 DS1SS133 12 11 26 D+5V +B A_5V +B SW_5V +B D859 DS1SS133 IC852 KIA7810AP VOLTAGE REGULATOR D852 DS1SS133 3 D851 DS1SS133 +B_PROTECT 23 D858 DS1SS133 R853 22K 2 D855 C856 3300/35 1 C855 0.1(ML) LD+7V C851 0.1 1 2 R854 E C863 22/50 R859 22K R860 220 3 1 1 3 2 2 4 3 3 5 4 4 6 5 5 7 6 6 8 7 7 9 8 8 10 9 9 11 10 10 2 IC851 KIA7812AP C854 0.1(ML) +B 1 22K M_+13V 25 IC851 KIA7812AP VOLTAGE REGULATOR C864 0.1(ML) SP_RLY 28 R857 3.3(1/2W) CNS801 DS1SS133 1 3 2 R852 10K CD_GND 13 C858 0.1 (ML) C859 0.1(ML) 1 2 IC853 KIA7805AP VOLTAGE REGULATOR 3 4 5 6 FROM DISPLAY PWB P25 12-F M_GND 19 G FW701 AGND(AUDIO PRO) 21 D_GND 24 CD_D_GND 17 CHASSIS CD_A_GND 18 TAPE_A_GND 20 H • NOTES ON SCHEMATIC DIAGRAM can be found on page 14. 1 2 3 4 Figure 22 SCHEMATIC DIAGRAM (5/10) – 22 – 5 6 CD-E700/CD-E77 MAIN PWB-A1 (3/3) CNP971 FM SIGNAL L902 3µH R R942 390(2W) L R943 390(2W) R934 56K R R944 1.5K R945 1.5K L L1_OUT R1_OUT R R949 1K R950 68K C931 10/50 R947 15K R937 56K C925 47/50 D912 DS1SS133 R935 56K RL914 – M901 FAN MOTOR M 1 FW901 CNP705 1 2 3 4 5 GND L-CH JK701 HEADPHONES 5 R940 10(1/2W) 4.4V R946 47K R938 10(1/2W) R941 10(1/2W) + R-CH 0.2V L901 3µH R939 10(1/2W) 1 SP_RLY Q905 KTC3199 GR L 2 1 HEADPHONES PWB-A3 WTM901 M_+13.5V D911 DS1SS133 C928 0.1(ML) C929 0.1 (ML) CNS971 2 Q906 KTC3203 Y 03 99 GR SP_L1OH SP_R1OH 6 OHMS MIN SO901 SPEAKER TERMINAL SP_L1CH_GND SP_R1CH_GND C810 0.22 (ML) C811 0.22 (ML) D801 D10XB60F CNP801 1 2 3 3 5 4 4 6 5 5 7 6 6 8 7 7 9 8 8 10 9 9 11 10 10 C808 0.1 (ML) VL– F801 4A/125V D802 D10XB60F VL+ C806 0.1(ML) WHITE VH+ F804 2A/125V D804 1N4004S D803 1N4004S BLACK 2 4 R844 82 3 C809 0.1 (ML) VH– 2 F803 2A/125V C807 0.1(ML) CNS801 2 3 4 C805 22/100 D806 1N4004S D805 1N4004S T.F. R808 2.2K(1/2W) PT801 MAIN POWER TRANSFORMER –VF R805 47 P_IN VF1 5 6 1 2 C861 0.022 C841 1000/6.3 R842 1K R843 47K D845 1N4004S D844 1N4004S C842 470/35 FW802 WTM801 1 D842 1N4004S D843 1N4004S C843 0.047(ML) 3 Q841 KTC3199 GR UNSW_5.6V 1 D853 1N4004S R858 220 CHASSIS IC854 AN78L05 VOLTAGE REGULATOR D856 DS1SS133 FROM DISPLAY PWB P25 12-F R841 220K AC_RLY FW701 D846 DS1SS133 ZD803 DZ30BSB C804 220/63 C803 47/50 R806 47K C802 47/50 C801 100/35 ZD801 DZ6.2BSA Q801 KTA1274 Y RL841 WTM802 1 R804 47 CNP802 R803 12K R801 100K R802 47K VF2 AC POWER SUPPLY CORD AC 120 V, 60 Hz C844 0.047/250 1 F805 4A/125V 1 TRANSFORMER PWB-B2 F802 4A/125V CHASSIS BI801 4 4 PT841 SUB POWER TRANSFORMER POWER PWB-B1 7 8 9 10 Figure 23 SCHEMATIC DIAGRAM (6/10) – 23 – 11 12 CD-E700/CD-E77 A LED703 A503BC2E B 2 G06 G07 G08 G09 P01 P02 P03 P04 P05 P06 NX NX NX NX NX P07 NX P08 P09 P10 P11 P12 P13 P14 P15 P16 P17 P18 R794 1.5 P19 Q710 KRC102 M R751 330 CNP703 CNS703 +10V +B P20 2 P21 1 2 NP 1 2 F 1 F BI703 NX FL701 FL DISPLAY LED A PWB-A4 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 3 1 C707 1/50 LED B PWB-A5 BI704 +B R749 330 CNP704 G6 G7 G8 G9 S1 S2 S3 S5 S4 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 S11 80 S12 79 VLOAD S6 CNS704 S7 2 S8 1 2 S9 1 2 S10 LED704 A503BC2E 1 78 S13 77 S14 76 S15 75 S16 C 74 DIST3/S17 73 DIST2/S18 R750 47K 72 DIST1/S19 71 DIST0/S20 70 S21 69 DIST 68 STOP LED 67 REV_PLY_LED IC701 IX0553AW SYSTEM MICROCOMPUT 66 FOR_PLY_LED 65 64 63 ILU_LED1 R757 1K 62 ESS DO 61 ESS DI 60 ESS STB D 33 KE 59 ESS ACK 32 KE 58 MPEG POWER 31 KE 57 DISC NO SW V_ONLY REMOCON 51 T2 RUN VSS 52 T1 RUN VDD AC_RLY R770 10K SMUTE 1K 53 +B T_SOL_B R735 54 O/C_SW T_SOL_A 1K T_MOTOR R734 TIMER LED 1K 1K R721 1K R736 1K R725 1K 680 R726 R733 680 R727 1K 2.2K R728 R724 560 R730 1K R729 10K R731 R762 10K 1K SP_RLY 1K A+10V +B R764 R732 1K E R758 JOG2 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 JOG1 +B R746 P_IN 55 MIC SW R772 10K SP DET CD CLAMP SW 56 KARAOKE LATCH FFC701 CE 16 DO 15 CLK 14 DI 13 PROTECT 12 +B FPA/FPB S_MUTE 10 T_T1/T2 9 REC/PLAY 8 +B 6 5 4 M_+13V +B SW_5V +B +B +B SP_DET 3 R761 10K SP_RLY 2 –20dB 1 R775 10K CNP701A LED701 304VT2E1 FFC702 SOL SOL + M – 7 6 6 5 5 4 4 3 3 2 2 1 1 T2 RUN F_REC H R778 10K R740 4.7K +B Q708 KTA1273 Y T1 RUN R779 10K SOLENOID DRIVER GND D710 DS1SS133 JOG701 JOG VOLUME +B C712 47/25 SOL2 CNP702 1 Q707 KTA1273 Y +MTR SOL1 R777 10K SOLENOID DRIVER 7 7 +B C710 0.0047 Q706 KTA1273 Y 0.0047 MOTOR DRIVER C709 TAPE MECHANISM PWB-F M_+13V R776 10K G D709 DS1SS133 • NOTES ON SCHEMATIC DIAGRAM can be found on page 14. 1 R756 4.7K T_BIAS 7 R765 4.7K CNP701B D_GND 11 R780 10K F TO MAIN PWB P19 12-G 2 3 4 Figure 24 SCHEMATIC DIAGRAM (7/10) – 24 – 5 6 CD-E700/CD-E77 G04 G03 G02 G01 4 3 NP G05 5 F G06 G07 G08 6 P01 7 P02 8 P05 9 P03 8 17 16 15 14 13 12 11 10 P04 G09 DISPLAY PWB-A2 2 1 R795 1.5 C701 1/50 C702 220/10 G1 G2 G3 G4 G5 G6 G7 G8 S1 S2 G9 S3 S4 S5 7 88 89 90 91 92 93 94 95 96 97 98 99 100 1 –20dBATT 2 VDD R763 1K R702 1K R703 1K R704 1K R705 1K R706 1K DSA_STB 3 T-BIAS 4 T_T1/T2 5 REC/PLAY 6 CD RESOUT 7 WRQ 8 SPAN 9 R708 1K RESET 10 C704 15P X2 11 C705 18P X1 12 VPP/IC 13 XL701 4.194304 MHz C721 0.022 DISC NO O/C_SW XT2 14 IC701 IX0553AW M MICROCOMPUTER DRF 15 CD CLK 17 33 KEY 0 CD DI R710 1K CD DO R711 1K 1K DRF R713 1K CLK 22 R714 1K DI 23 R715 1K DO 24 R716 1K R717 100 R739 1K AVSS DISC_NO SW/ DSA DATA TUN SM DSA_ACK T2_PLAY SW/ FPA/FPB SW PROTECT LVL_DET AVDD AVREF P_IN SP DET CD CLAMP SW REMOCON VSS SMUTE T_SOL_A T_MOTOR 1K R712 32 KEY 1 31 KEY 2 R709 CE 21 CD CE 20 4 43 42 41 40 39 38 37 36 35 34 33 32 31 6 6 5 5 4 4 3 3 2 1 BI701 CNP6 TO CD SERVO PWB P27 12-B 1 CNS701 25 26 27 28 R791 4.7K 29 30 C720 0.022 +B WTM701 1 R759 5.6K R722 1K FW701 –VF P_IN R747 4.7K 1K 7 7 WRQ(DSP) R718 1K R719 R720 1K 1K R721 1K R736 1K R733 1K 1K R725 R724 680 680 R726 R727 8 8 2 VF2 +B 9 9 CD CLK +B CD CE CD DO 19 10 10 RES OUT 1K VDD 16 CD DI 18 T_SOL_B R769 11 CLAMP SW VF1 UNSW5.6 +B AC RELAY 6 CTR R773 10K +B 5V BACK UP +B L701 100 µH D713 DS1SS133 D714 DS1SS133 C715 0.01 R761 10K R768 10K RD19 680 KEY 2 SW721 X-BASS/ DEMO SW722 EQUALIZER RD10 680 KEY 1 0.0047 RD20 820 1 RX701 GPUM271 3 D715 DS1SS133 2 +B C714 3.3/50 Q709 KRC102 M +B R783 100 1 2 R782 100K R781 47K R756 4.7K R765 4.7K RESET LED701 304VT2E1 D711 DS1SS133 D712 DS1SS133 CNP802 TO POWER PWB P23 7-G 3 C717 47/25 RD21 1K SW723 OPEN/ CLOSE SW724 DISC SKIP RD11 820 RD12 1K RD13 1.5K RD14 2.2K SW711 CD SW712 TUNER SW713 VIDEO/ AUX SW714 TAPE SW715 STOP RD01 680 RD02 820 RD03 1K RD04 1.5K RD15 2.7K RD16 3.9K R767 10K SW716 PLAY SW717 FAST FORWARD SW718 FAST REWIND KEY 0 R766 10K SW702 SW701 SW703 POWER MEMORY REC SET PAUSE 7 8 9 SW704 TUNING DOWN RD05 2.2K SW705 TUNING UP 10 Figure 25 SCHEMATIC DIAGRAM (8/10) – 25 – RD06 2.7K SW706 TIMER/ SLEEP SW707 CLOCK 11 12 CD-E700/CD-E77 A CD SERVO PWB-C C3 CD SIGNAL PICKUP UNIT 1 C3 C2 C2 3 3 3 2 2 2 2 1 1 1 1 8.2K R4 8.2K F R3 22K C R1 8.2K CNP1 C FO+ FO+ FO– PD TR– VR LD 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7 7 8 8 C4 0.001 GND 1 SLCO 2 SLCIST 3 EFMIN 4 RF C19 0.022 C8 0.0027 C45 22P(CH) TP1 TP2 5 5 RFVDD 6 RSVSS 7 FIN1 A 8 FIN2 B 9 TIN1 E 10 TIN2 F 11 VREF (OS) C21 0.001 C9 3.3/16 C11 0.22/50 TR+ FO+ FO– GND PD C43 0.022 C38 0.01 VR LDD 80 79 78 77 76 75 74 R12 330 TR– LD 8 8 C37 0.1 C6 0.1 C20 0.001 1 C5 0.047(ML) R10 27K C3 47/25 R9 10 CNS2A CNS2B TR– TR+ D R42 1.2K C1 47/25 TR+ 4 15 C12 16 100P 17 18 19 VCC2 REV VO5– GND VO5+ 8 30 7 6 5 4 3 2 1 M– 9 M+ C41 100/10 FWD VIN4 VCC VO4+ 14 13 12 11 10 VO4– VIN1 F VCONT 15 16 17 18 19 20 21 29 22 23 24 25 26 27 28 GND IC2 LA6574H FOCUS/TRACKING/SPIN/ SLED DROVER TO PUIN VO3+ 1 VO3– 1 VREF 6 GND 2 6 VREF 3 2 GND 3 5 VO2+ 4 5 SL– VCC 4 +B +B SL+ REG-IN – 1 C40 100/10 SP– REG-OUT 4 R15 1K VO2– 5 4 VO+ 5 3 VO– 2 3 Q4 KTA1271 Y 2 + 6 R16 1K C39 100/10 FD – SP+ VIN3 6 JITTC ADAVDD ADAVSS 20 TDO FDO 21 22 23 24 25 26 27 +B VCC1 6 SPO 1 VIN2 M 1 + RFMON R14 1K CNP3 SW4 PICKUP IN M CNS3A M2 SLED MOTOR CNS3B E M1 SPINDLE MOTOR TE R13 15K 2 CONSTANT VOLTAGE CNP3A R8 10K C17 100/10 +B +B C48 0.001 G H • NOTES ON SCHEMATIC DIAGRAM can be found on page 14. 1 2 L C REF1 C10 12 10/25 13 FE 14 TEC CNP2 CD MOTOR PWB-D 3 C36 0 22/50 R5 B 4 Figure 26 SCHEMATIC DIAGRAM (9/10) – 26 – 5 R40 680 3 A VVSS 4 R41 12K 5 4 22K VVDD 5 4 R6 PCKIST 5 4 E CONT4 CONT5 5 +B VREF LDS 6 GPDAC C 7 6 FR F 7 6 SPDO SLDO B 7 6 R11 10K A 7 LASER DRIVER Q1 KTA1266 GR E R2 8.2K VREF C2 VCC C2 0.01 B VCC R7 47 PDO2 CNS1A CNS1B HPC1LX +B 6 R1 1K CD-E700/CD-E77 C33 100P R38 1K R37 1K R36 1K R35 1K C30 100P R34 1K C29 100P R33 1K C28 100P R32 1K C27 DRF CD RES WRQ 1 +B 0.022 2 CE +B DO +B DI 3 5 C35 0.047 (ML) 3 7 DI CL CE DO ∗RES ∗WRQ 5 RFVDD 6 RSVSS ASDFIN 57 ASDACK 56 ASLRCK 55 7 FIN1 A 8 FIN2 B 9 TIN1 E IGMOUT 54 EFLG 53 C2F 52 5 IC1 LC78646E CD SERVO 10 TIN2 F 11 VREF 12 REF1 13 FE 14 TEC +B L-CH DGND TEST ZD1 DZ3.3BSB C44 0.001 C23 10/25 R15 1K C16 330/6.3 C25 0.0015 (ML) C22 0.01 C13 0.022 C14 100/10 C24 10/25 R25 2.2K LVDD 41 R24 2.2K R18 1K D5V C42 0.01 +B A5V +6.5V RVSS 44 LVSS 43 LCHO 42 DOUT VDD VSS MON15 MON13 MON14 MON12 MON11 FSEQ V/1P DEFECT SBCK/FG CONT4 CONT5 GPDAC 9 R22 100 R43 220 6 1 R-CH AGND XIN 49 XOUT 48 20 TDO FDO 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 R16 1K 11 XVSS 51 FSX/16MIN 50 R13 5K 14 K CNP6 XL1 16.933 MHz XVDD 47 RVDD 46 RCHO 45 SPDO SLDO 15 TE 16 RFMON 17 JITTC 18 ADAVDD 19 ADAVSS 10 1 2 FROM MAIN PWB P18 1-B 3 4 CNS601 5 6 7 8 CNP5 VSS VDD5 DRF CONT3 CONT2 CONT1 PDO1 PDO2 VVSS VVDD PCKIST 8 10 9 DISC NO L1 0.82 µH R40 680 R41 12K LDS FR 3 EFMIN 4 RF 60 DATA 59 BCK 58 LRCK 8 O/C, 2.2K 2.2K 12 LDD 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 1 SLCO 2 SLCIST 7 CLAMP SW R29 R28 CNS701 6 R31 4.7K R39 680 C37 0.1 C36 0.22/50 CL R42 1.2K FROM DISPLAY PWB P25 12-D 4 D_GND C26 0.0015 (ML) R27 10K R26 10K R20 10K FOCUS/TRACKING/SPIN/ SLED DROVER R19 15K R8 10K +B +B +B +B CNS4 +B R21 1 +B R46 1 +B BI4 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 + 6 6 6 – SW1 OPEN/CLOSE SW2 CLAMP SW3 DISC NUMBER M M3 T/T UP DOWN LOADING MOTOR CNP4 CD LOADING MOTOR PWB-E C15 0.001 • The numbers 1 to 12 are waveform numbers shown in page 36. 7 8 9 10 Figure 27 SCHEMATIC DIAGRAM (10/10) – 27 – 11 12 CD-E700/CD-E77 C396 C383 R391 R384 R386 T351 R383 C391 R385 R392 C398 C386 R387 C602 R606 24 13 R644 E C B R903 R946 B C E E C B R945 D912 R944 R950 L902 Q903 E C B D911 R934 Q904 R905 R901 C903 C906 Q603 C902 R906 C904 C913 C907 C908 R907 R908 R947 Q905 C931 R949 E C B C905 R610 C925 E C B C909 R611 Q906 B C E C639 R621 C R641 Q604 R616 R617 R620 C640 R605 Q601 E C B R613 R615 R618 R604 Q602 R614 1 R619 R612 R937 R693 L-CH 2 C901 CNP971 R691 C691 R692 JK690 VIDEO/AUX R C R902 R958 R904 R912 R909 IC901 R935 D907 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 L-CH – R942 R943 R911 R918 R916 Q902 E C B C917 R939 R941 C928 C929 R919 C920 C923 R940 R938 H 1 2 3 4 Figure 28 WIRING SIDE OF P.W.BOARD (1/7) – 28 – 5 6 R927 – D906 R-CH R910 R917 B C E C910 R913 + C919 L-CH R920 R921 R922 + D905 R-CH Q901 C912 C911 L901 RL914 SO901 SPEAKER TERMINAL G C C624 R-CH F C C625 C622 C372 C 12 C626 R642 C 15 10 C612 C368 TP302 5 IC601 C371 20 C620 T306 C 1 C C616 C374 C653 C601 R609 C358 C606 C373 R356 C365 R358 R350 C364 C388 C618 R357 C367 C363 C608 C614 15 13 C369 R351 20 C603 C610 C366 24 C361 C342 IC303 C399 C355 12 R365 C362 C357 R353 C354 10 R608 C313 C356 CF351 R355 X351 C312 C316 C335 R690 C690 E C389 C320 R380 D305 R336 C331 C946 M901 FAN MOTOR C330 R395 L352 ZD351 1 2 3 R313 C334 C395 R376 C370 R352 C353 1 5 VD302 R311 C332 C338 BR 2 RD 1 CNS971 C309 B C E R388 C352 C351 C350 CF303 R323 VD301 D R325 R322 R314 T303 C323 R382 CF352 3 2 1 R375 B C E C308 C317 D301 D302 15 L351 R377 R302 C324 R327 C310 C311 T302 R359 R360 12 C393 Q302 C315 C314 L312 IC301 3 2 1 BF301 1 2 3 CNP301 1 2 3 C303 C304 FM ANTENNA C 9 8 7 6 5 4 3 2 1 C305 AM LOOP ANTENNA TP301 R316 C306 C307 B IC302 C387 C318 C397 C394 R381 11 Q360 R379 20 22 C392 C380 C381 10 R393 1 R378 C385 X352 C382 CNS R374 R373 R372 5 R309 VD303 C302 T301 C384 MAIN PWB-A1 A CD-E700/CD-E77 TO CD SERVO PWB P32 4-A TO DISPLAY PWB P31 12-D CNP701A CNP5 FFC701 R136 16 CNS601 1 2 3 4 5 6 7 8 P33 10-F RD BL GR BL GR BL GR BL R138 R134 C130 R158 R122 C120 C132 C134 C127 R132 C133 C128 R130 C135 C126 C129 IC101 C103 R111 C106 C138 CNP102 C150 C118 R145 R114 R113 C105 R108 C140 R140 3 2 1 E C B Q110 Q109 HEADPHONES PWB-A3 JK701 HEADPHONES R146 R912 3 2 1 LG3 CNP705 12 3 4 5 IC853 R857 D910 1 FW901 R927 R926 C916 D909 C921 R919 C922 C917 R856 ZD902 E C B GR WH GR WH GR WH GR WH GR RD 11 R929 1 1 CNS801 WTM901 C923 10 9 8 7 6 5 4 3 2 1 CNP801 C856 R930 R928 R925 5 TO POWER PWB P34 4-A R918 R916 C914 ZD903 C864 3 2 1 D855 E C B IC855 IC852 3 2 1 C915 1 10 9 8 7 6 5 4 3 2 1 IC851 C918 IC901 D906 L103 C139 R141 C859 C865 R852 D858 C858 C863 C855 D859 R860 C854 R604 C104 R859 4 Q902 P33 11-F FROM TAPE2 RECORD/PLAYBACK HEAD ZD852 R958 R910 R917 C111 C102 R961 R605 R854 E C B E R105 C B Q103 R103 C B Q101 R104 C B Q102 R112 C B Q104 R106 C137 R144 R143 E C B Q111 D851 D852 D857 R853 R616 R617 R620 C640 C851 2 R117 C621 C623 Q603 C113 9 R641 C902 R147 E E C141 R643 Q604 E C B R149 E Q112 C619 E C B C108 R102 7 6 5 4 3 2 1 C116 R120 C110 BI801 12 BL GR BL GR BL GR BL C613 C624 E C B R115 E C B Q114 C617 C611 1 RD C625 C612 R644 CNP101 C101 3 2 3 1 2 1 R118 C112 1 R116 24 R101 R124 C114 20 C107 R123 C109 Q113 15 10 13 C622 C117 BI601 5 C605 C626 R642 R119 C115 5 R109 Q105 R148 R110 R107 Q106 C620 4 C615 R607 20 C618 3 C121 C609 1 C607 C616 R121 B C E Q108 13 R126 R128 C124 R150 10 15 3 2 1 IC601 C614 C602 R606 24 R609 C606 R608 388 C601 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 CNP701B R601 R603 R602 C652 C608 C651 C603 C610 C653 Q107 R135 C131 R133 R139 C125 12 E R127 C R137 R131 B C119 R129 C143 C123 FROM TAPE1 PLAYBACK HEAD R142 1 5 7 8 9 10 Figure 29 WIRING SIDE OF P.W.BOARD (2/7) – 29 – 11 12 CD-E700/CD-E77 A DISPLAY PWB-A2 3 C717 LED B PWB-A5 2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 RX701 SW721 X-BASS/DEMO 1 BI704 LED704 B 1 1 2 SW722 EQUALIZER 1 2 CNS704 RD19 RD20 9 95 R763 C702 R783 R705 R704 R703 BI701 R795 11 R710 RD10 SW712 TUNER R756 Q709 1 3 2 1 R739 R791 Q707 R777 R778 R779 C712 D714 D713 SW723 OPEN/ CLOSE 7 SW713 VIDEO/ AUX E C B Q708 D709 D710 CNP702 6 4 2 7 5 3 1 RD21 R759 E C B C710 R781 C715 D712 D711 RD11 RD12 Q706 E C B R740 R782 R713 R716 R714 R715 R717 C714 D715 SW716 PLAY RD15 SW717 FAST FORWARD SW724 DISC SKIP RD16 1 FFC702 P33 9-A TO TAPE MECHANISM PWB G H 1 2 3 R71 R71 R780 R776 R775 C709 E F C704 C705 R769 1 6 XL701 C721 R709 JOG701 JOG VOLUME FW701 R708 1 RD13 WH YL WH YL WH YL WH YL WH RD WTM701 TO POWER PWB P34 4-A CNP802 D TO CD SERVO PWB P32 3-A CNP6 CNP704 CNS701 10 9 8 7 6 5 4 3 2 1 L701 R702 C701 1 2 R706 C 100 FL701 4 Figure 30 WIRING SIDE OF P.W.BOARD (3/7) – 30 – 5 6 CD-E700/CD-E77 45 R794 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 R757 R750 81 80 85 75 70 5 1 10 15 20 2535 30 2 1 65 IC701 6055 45 51 R746 R735 50 R734 40 31 C720 R713 R716 R714 R715 R722 R718 R719 R766 R767 R768 R773 3 2 1 R749 SW701 POWER Q710 R761 SW707 CLOCK R724 R720 SW702 MEMORY SET R733 R765 SW706 TIMER/ SLEEP R736 SW714 TAPE SW705 TUNING UP R725 R762 R721 RD02 SW703 REC/PAUSE RD04 FFC701 1 2 4 6 8 10 12 14 16 1 3 5 7 9 11 13 15 CNP701A RD06 RD05 16 SW704 TUNING DOWN RD03 RD14 RD15 RD16 SW715 STOP SW718 FAST REWIND 7 8 CNS703 1 2 CNP703 R751 R747 R770 R772 R758 R731 R764 R732 R730 R729 R728 R727 R726 SW711 CD R711 R712 1 RD01 100 C707 90 95 2 BI703 CNP701B TO MAIN PWB P29 9-A 8 19 LED703 LED701 LED A PWB-A4 9 10 Figure 31 WIRING SIDE OF P.W.BOARD (4/7) – 31 – 11 12 CD-E700/CD-E77 FROM DISPLAY PWB P30 1-D CNS701 10 30 15 25 IC2 22 21 14 C39 10 20 15 E C B Q4 C25 C23 C16 R20 C48 R16 5 7 8 2 R14 C40 28 9 6 1 21 C11 C12 25 C20 C21 C10 R8 C17 1 20 R18 R3 C43 R6 R13 R15 R4 R1 C9 4 R24 R26 R5 R2 C44 C22 41 40 35 C14 IC1 10 L1 C13 5 C24 R27 C26 C28 C29 C30 C5 C6 65 55 70 50 75 45 80 1 C19 R19 C45 CNP1 7 6 5 4 3 2 1 R43 R42 R11 R10 C2 R12 61 60 C37 5 R22 R32 R33 R34 R35 R37 R36 C33 XL1 R31 R41 C1 C C27 R39 R40 R25 ZD1 7 8 C35 R28 R29 C8 B C42 C36 R7 12 11 CNP5 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 CNP6 R9 CNP2 8 7 6 5 4 3 2 1 B C E R38 C38 Q1 C3 A 3 C4 CD SERVO PWB-C FROM MAIN PWB P29 8-A CNS601 R46 C15 R21 C41 D CNP3 65 4 3 2 1 CNP4 12 3 4 5 6 COLOR TABLE F RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK PICKUP UNIT(306) CNS3A 654 321 CD MOTOR PWB-D 654 321 CNS3B RD WH GY WH GY WH GY WH CNS1B 1 2 3 4 5 6 7 7 8 1 654 321 CNP3A 1 1 2 3 4 5 6 7 8 + 1 2 3 4 5 6 7 8 G RD WH BL WH BL WH BL SW4 PICKUP IN + CNS2B CNS2A – CNS1A 1 2 3 4 5 6 7 M2 SLED MOTOR E BROWN WH GR WH GR WH RD BR RD(R) – H M1 SPINDLE MOTOR • The numbers 1 to 12 are waveform numbers shown in page 36. 1 2 3 4 Figure 32 WIRING SIDE OF P.W.BOARD (5/7) – 32 – 5 6 CD-E700/CD-E77 TAPE MECHANISM ASSEMBLY P30 3-F TO DISPLAY PWB CNP702 TAPE MECHANISM PWB-F FFC702 7 1 SW 1 3 5 7 2 4 6 SW 1 SW 2 SOLENOID + - SOLENOID TAPE MOTOR TAPE 1 PLAYBACK HEAD TAPE 2 ERASE HEAD RECORD/PLAYBACK HEAD BL SW1 OPEN/CLOSE BL YL WH BK PK WH BK + WH BK PK M3 T/T UP/DOWN LOADING MOTOR GR GR 7 6 5 4 3 2 1 3 2 1 CNP102 CNP101 P29 12 - A TO MAIN PWB – 1 CNS4 RD WH BK WH BK WH SW2 CLAMP BI4 1 2 3 4 5 6 P29 12 - C TO MAIN PWB 6 SW3 DISC NUMBER 7 8 9 10 Figure 33 WIRING SIDE OF P.W.BOARD (6/7) – 33 – 11 12 PK BK GR PK WH BK YL WH WH CD LOADING MOTOR PWB-E CD-E700/CD-E77 POWER PWB-B1 FROM DISPLAY PWB P30 1-D FW701 FROM MAIN PWB P29 12-G CNS801 R841 IC854 ZD801 C806 C807 D803 R858 C810 C803 B C801 ZD803 D805 R808 D845 Q801 E C B D844 C843 D801 C811 D802 C804 C841 10 9 8 7 6 5 4 3 2 1 CNP801 R803 R802 R805 R844 D804 C805 D856 R804 C861 C842 65 4 3 2 1 CNP802 D853 3 2 1 R801 A D806 D842 R843 F803 2A/125V F804 2A/125V D843 R806 F802 4A/125V C802 4 1 C809 WTM802 C F801 4A/125V R842 Q841 B C E C808 PT801 MAIN POWER TRANSFORMER FW802 D E T.F. F805 4A/125V F WTM801 4 RL841 D846 1 AC POWER SUPPLY CORD AC 120 V, 60 Hz BK WH C844 G PT841 SUB POWER TRANSFORMER H TRANSFORMER PWB-B2 1 2 3 4 Figure 34 WIRING SIDE OF P.W.BOARD (7/7) – 34 – 5 6 CD-E700/CD-E77 VOLTAGE IC101 PIN NO. VOLTAGE 1 0V 0V 2 3 0.56 V 4 1.996 V 5 N.C. 6 1.303 V 0V 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 0.587 V 3.54 V 3.46 V 0V 0V 7.03 V 4.2 V 0V 3.46 V 0.587 V 0V 2.68 V NC 2.02 V 0.561 V 0V 0V IC851 PIN NO. VOLTAGE 1 20.2 V 2 1.351 V 3 13.41 V IC852 PIN NO. VOLTAGE 1 19.9 V 0V 2 3 10.09 V IC853 PIN NO. VOLTAGE 1 20.4 V 0V 3 2 5V IC854 PIN NO. VOLTAGE 1 15.5 V 2 0.59 V 3 5.6 V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 IC302 VOLTAGE 2.6 V 0V 0V 0V 0V 5.07 V 10.05 V 4.78 V 0V 0V 5.23 V 0V 5.23 V 0V 0V 2.6 V 5.25 V 0V 0V 0.838 V 0V 2.71 V IC601 PIN NO. VOLTAGE 1 0V 2 0V 0V 3 4 5V 5 5V 6 5V 5V 7 5V 8 5V 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 10.07 V 0V IC303 VOLTAGE 2.13 V 5.15 V 2.13 V 2.13 V 0V 5.23 V 5.23 V 3.6 V 5.15 V 4.43 V 1.836 V 1.265 V 2.32 V 1.25 V 1.269 V 2.12 V 0V 5.01 V 5.02 V 5.02 V 5.04 V 5.04 V 10.08 V 0V IC301 PIN NO. VOLTAGE 1 0.8 V 1.5 V 2 3 3.6 V 1.5 V 4 0V 5 6 3.6 V 7 2.8 V 8 3.6 V 3.6 V 9 IC855 PIN NO. VOLTAGE E 7.69 V B 8.24 V C 13.2V IC1 PIN NO. VOLTAGE 1 1.6 V 2 1.0 V 3 1.6 V 4 1.8 V 5 3.3 V 6 0V 7 1.6 V 1.6 V 8 1.6 V 9 10 1.6 V 11 1.6 V 12 1.6 V 13 1.5 V 14 1.5 V 15 1.5 V 16 1.5 V 17 0.8 V 18 3.2 V 19 0V 20 1.6 V 21 1.6 V 22 1.6 V 23 1.6 V 24 0V 25 0V 26 3.2 V 27 0V 28 0V 29 0V 30 0V 31 0V 32 0V 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 0V 0V 0V 0V 0V 3.2 V 3.2 V 0V 3.7 V 3.7 V 0V 0V 3.7 V 3.2 V 3.2 V 3.2 V 0V 0V 0V 3.2 V 0V 0V 0V 0V 0V 3.2 V 0V 0V 0V 4.7 V 0V 4.9 V 4.9 V 4.9 V 0V 4.9 V 0V 0V 0V 0V 0V 0V 0V 3.2 V 3.2 V 3.2 V 0V 3.2 V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 – 35 – VOLTAGE 4.85 V 4.78 V 0V 0V 4.71 V 4.75 V 4.78 V 4.92 V 0V 4.89 V 2.32 V 2.014 V 0V 4.78 V 0V 4.79 V 4.72 V 0.14 V 4.86 V 0.1 V 0V 0V 0V 5.02 V 0V 4.93 V 0. V 5.08 V 5.07 V 0V 5.08 V 3.31 V 5.08 V 4.79 V 5.08 V 1.41 V 0V 5.09 V 4.95 V 0V 0V 13.23 V 13.23 V 13.23 V 3.82 V 4.79 V 4.78 V 4.54 V 0V 4.93 V IC901 VOLTAGE 58.8 V 27.8 V 15.9 V -15.9 V 28.2 V -58.7 V 0V 0V 0V 0V 0V -56.8 V -56.8 V 0V 0V -55.3 V 0V 0V IC701 PIN NO. VOLTAGE 51 4.93 V 52 4.93 V 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 N.C. 0V 0V 0V 0V 0V 0V 0V 0V 0V 4.82 V 4.84 V (N.C.) 4.84 V (N.C.) 4.82 V 0V 4.82 V -27.4 V -30.4 V -30.4 V -18.2 V -30.4 V -27.4 V -21.1 V -24.2 V -27.3 V -15.13 V -30.5 V -27.3 V -18.23 V -27.3 V -24.2 V -30.4 V -21.2 V -14.95 V -30.4 V -30.3 V -30.3 V -30.3 V -27.2 V -27.2 V -27.1 V -27.3 V -27.3 V -27.3 V -26.6 V -27.3 V -27.3 V -27.3 V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 IC2 VOLTAGE 7.76 V 0V 0V 2V 2V 2V 2V 2V 2V 2V 2V 4.8 V 1.7 V 1.7 V 1.7 V 1.7 V 1.7 V 1.7 V 4V 3.3 V 1.7 V 4.8 V 1.7 V 1.7 V 2.8 V 0V 4.8 V 4.8 V CD-E700/CD-E77 WAVEFORMS OF CD CIRCUIT Stopped CH1=500 mV DC 10:1 CH3=500 mV DC 10:1 T 1 IC1 21 Stopped CH1=200 mV DC 10:1 500 ms/div (500 ms/div) NORM:20 kS/s T 1999/04/07 09:51:15 500 ms/div (500 ms/div) NORM:20 kS/s CH2=500 mV DC 10:1 FDO 1 T FDO 1 IC1 21 2 6 IC1 22 1 TDO 2 IC1 20 3 SPDO CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.000 V CH4 : 0.00 V Stopped CH1=500 mV DC 10:1 1 IC1 21 3 IC1 67 CH2=10 V DC 10:1 =Record Length= Main : 100 K Zoom : 2K CH3=1 V DC 10:1 =Filter= Smoothing : ON BW : FULL =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Stopped CH1=500 mV DC 10:1 500 ms/div (500 ms/div) NORM:20 kS/s T 2 IC1 73 CH3=1 V DC 10:1 =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924 ms Hold off : 0.2 µs 1999/04/05 17:33:17 CH4=1 V 500 ms/div (500 ms/div) DC 10:1 NORM:20 kS/s 3 4 DRF PDO2 IC1 74 T TE IC1 15 =Record Length= Main : 100 K Zoom : 2K PDO1 7 FDO 1 8 4 =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V 3 CH Position To -3 div -1 div 0 div +1 div +3 div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000 V Main : 100 K BW : FULL CH2 : 0.0 V Zoom : 2K CH3 : 0.00 V CH4 : 0.00 V 1 CH2 Position 0.20 div IC1 21 FDO 1 CH1 v/DIV 500 mV =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs =Filter= Smoothing : ON BW : FULL Stopped CH1=2 V DC 10:1 =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K T =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0 ns Hold off : 0.2 µs 1999/04/07 09:25:28 500 ns/div (500 ns/div) NORM:200 MS/s T 5 9 IC1 4 IC1 39 DOUT =Filter= Smoothing : ON BW : FULL Vp-p=1.0 V~1.3 V 0.5 mV/div,0.5 µsec/div Stopped CH1=10 V DC 10:1 1 T CH2=1 V DC 10:1 Stopped CH1=2 V DC 10:1 100 ms/div (100 ms/div) NORM:100 kS/s 10 =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 1K Zoom : 100 T CH2=2 V DC 10:1 CH3=2 V DC 10:1 =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887 ms Hold off : 0.2 µs 1999/04/05 20:50:17 5 µs/div (5 µs/div) NORM:100 kS/s IC1 58 TE 4 IC1 15 1 2 LRSY 11 IC1 59 2 DATACK 3 IC1 67 T 1 DRF 12 IC1 60 T 3 DATA =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.0 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924 ms Hold off : 0.2 µs =Filter= Smoothing : ON BW : FULL – 36 – CH3 v/DIV 2V =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 5K Zoom : 100 =Trigger= Mode : AUTO Type : EDGE CH3 Delay : 0.0 ns Hold off : 0.2 µs CD-E700/CD-E77 TROUBLESHOOTING When the CD does not function When the CD section does not operate when the objective lens of the optical pickup is dirty, this section may not operate. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check the following items. Remove the cabinet and follow the trouble shooting instructions. "Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attempting any adjustment make certain that the lens is clean. If not, clean it as mentioned below." Turn the power off. Gently clean the lens with a lens cleaning tissue and a small amount of isopropyl alcohol. Do not touch the lens with the bare hand. 1. Parts code UDSKA0004AFZZ CD optical pickup Lens cleaner disc HOW TO USE 1. Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the brush on the CD cleaner disc which has the mark next to it. 2. Place the CD cleaner disc onto the CD disc tray with the brush side down,then press the play button. 3. You will hear music for about 20 seconds and the CD player will automatically stop. If it continuous to turn, press the stop button. Cleaning fluid CAUTION The CD lens cleaner should be effective for 30-50 operations, however if the brushes become worn out earlier then please the cleaner disc. If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft cloth. Do not drink the cleaner fluid or allow it to come in contact with the eyes. In the event of this happening then drink and / or rinse with clean water and seek medical advice. The CD cleaner disc must not be used on car CD players or on computer CD-ROM drives. All rights reserved. Unauthorized duplicating, broadcasting and renting this product is prohibited by law. Cleaner disc When a CD cannot be played 1. "E-CD01" is displayed. (1) Check the power to IC1 (LC78646E), the presence of the clock signal (16.933 MHz) and the status of the RESET terminal (pin 66 on IC1). (2) Does the pickup move to the PICKUP-IN Switch (SW4) position? If (1) and (2) are OK, check the system microcomputer (especially the communication line with the DSP). 2. Pressing the CD operation key is accepted, but playback does not occur. (1) Focus-HF system check (2) Tracking system check (3) Spin system check (4) PLL system check (5) Others – 37 – CD-E700/CD-E77 Stopped CH1=500 mV DC 10:1 (1) Focus-HF system check. Although a CD is inserted and the cover is closed, "NO DISC" is displayed. CH3=500 mV DC 10:1 T 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 Press the OPEN/CLOSE switch (SW1) without inserting a disc, and try starting the playback operation. TDO 3 CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.000 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Figure 38-1 1. Does the pickup move to the PICKUP-IN Switch (SW4) position ? No Sled motor (M2). Yes No 2. Does the focus (lens) move up and down ? (Waveform drawing Figure 38-1) Check the focus peripheral circuit. Yes No 3. Is the laser lit ? Check the laser diode driver Q1 peripheral circuit. Yes No 4. Is the turntable rotating ? Spindle motor (M1). When a disc is loaded, start playback operation. No 1. Is focus servo activated ? (Waveform drawing Figure 38-2) Pins 7~11, 79 and 80 on IC1 Check the laser diode driver Q1 peripheral circuit. Yes No 2. Does DRF change from "L" to "H" ? Is the disc rotating ? No 3. Is the HF waveform normal ? (Waveform drawing Figure 38-3) CH2=10 V DC 10:1 CH3=1 V DC 10:1 Check the spin system. If the disc is spinning and a HF waveform is generated, DRF will go H. Yes Stopped CH1=500 mV DC 10:1 No If the level is not normal. 500 ms/div (500 ms/div) NORM:20 kS/s FDO 1 T 2 DRF TE 3 CH Position To -3 div -1 div 0 div +1 div +3 div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000 V Main : 100 K BW : FULL CH2 : 0.0 V Zoom : 2K CH3 : 0.00 V CH4 : 0.00 V CH2 Position 0.20 div Vp-p=1.0 V~1.3 V 0.5 mV/div,0.5 µsec/div =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0 ns Hold off : 0.2 µs Figure 38-3 Figure 38-2 – 38 – CD-E700/CD-E77 (2) Tracking system check. Check the TE waveform at pin 15 on IC1. If the waveform shown in Figure 39-1 appears and soon after NO DISC appears ? Yes The tracking servo is not activated. Check the peripheral circuits at pins 14, 15 and 20 on IC1, and CNS1A/B. Yes A normal jump operation cannot be completed or the beginning of the track cannot be found. Check the around pin 20 on IC1. No "Initialization" is possible, but play is not possible ? No "Initialization" is not possible. Data cannot be read. Check the VCO-PLL system. Stopped CH1=10 V DC 10:1 T CH2=1 V DC 10:1 100 ms/div (100 ms/div) NORM:100 kS/s TE 2 T 1 DRF =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.0 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924 ms Hold off : 0.2 µs Figure 39-1 (3) Spin system check. Press the OPEN/CLOSE switch without inserting a disc, and then try starting the play operation. 1. The turntable rotates a little ? (Waveform drawing Figure 39-2) The spin driver circuit is OK. Yes No 2. The turntable doesn't rotate. Check around pin 22 on IC1, pins 15 and 16 on IC2, and CNS3A/B. Stopped CH1=200 mV DC 10:1 T 1999/04/07 09:51:15 500 ms/div (500 ms/div) NORM:20 kS/s CH2=500 mV DC 10:1 T FDO 2 1 SPDO =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.000 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K Figure 39-2 – 39 – =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924 ms Hold off : 0.2 µs CD-E700/CD-E77 (4) PLL system check. Stopped CH1=500 mV DC 10:1 When a disc is loaded, start play operation. CH3=1 V DC 10:1 1999/04/05 17:33:17 CH4=1 V 500 ms/div (500 ms/div) DC 10:1 NORM:20 kS/s PDO1 3 4 The HF waveform is normal, but the TOC data cannot be read. PDO2 T FDO 1 Check the PDO waveform. (Figure 40-1) CH1 v/DIV 500 mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000 V CH2 : 0.0 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 100 K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0 ns Hold off : 0.2 µs Check around pins 73~78 on IC1. Figure 40-1 (5) Others. The HF waveform is normal and the time is displayed normally, but no sound is produced. Or the sound has dropouts. No Is pin 52 (C2F) on IC1 "L" ? There are too many error flags on a damaged disc which makes error correction impossible. Yes 1. When playing at normal speed Check the peripheral circuit at pin 39 (DOUT) on IC1 and the waveform (Figure 40-2). Check again using a known good disc. Stopped CH1=2 V DC 10:1 If OK, Check the unit. T 1999/04/07 09:25:28 500 ns/div (500 ns/div) NORM:200 MS/s T 1 DOUT =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.00 V CH2 : 0.00 V CH3 : 0.00 V CH4 : 0.00 V =Record Length= Main : 1K Zoom : 100 Figure 40-2 – 40 – =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887 ms Hold off : 0.2 µs CD-E700/CD-E77 FUNCTION TABLE OF IC IC1 VHiLC78646E-1: CD Servo (LC78646E) (1/2) Pin No. Terminal Name Input/Output Setting in Reset 1 SLCO Output — 2 SLCIST Input — 3 EFMIN Input — 4 RF Output — 5 RFVDD Input — RF power terminal. 6 RFVSS — — RF earth terminal. To be connected to 0 V. 7 FIN1 Input — A+C signal input terminal. 8 FIN2 Input — B+D signal input terminal. 9 TIN1 Input — E signal input terminal. 10 TIN2 Input — 11 VREF Output RFVDD/2 12 REF1 Input — Function Control output. For slice level control. Resistor connection terminal for SLCO output current setting. RF signal input terminal. RF signal monitor terminal. F signal input terminal. VREF voltage output terminal. Reference supply setting terminal. 13* FE Output ZHI 14 TEC Output – FE signal monitor terminal. 15* TE Output ZHI TE signal monitor terminal. 16* RFMON Output ZHI RF internal signal monitor terminal. 17 JITTC – — Capacitor connection terminal for jitter detection. 18 ADAVDD Input — Power terminal for servo A/D, D/A. 19 ADAVSS — — Earth terminal for serve A/D, D/A. To be connected to 0 V. 20 TDO Output ADAVDD/2 Output terminal for tracking control. D/A output. 21 FDO Output ADAVDD/2 Output terminal for focus control. D/A output. 22 SPDO Output ADAVDD/2 Output terminal for spindle control. D/A output. 23 SLDO Output ADAVDD/2 Output terminal for sled control. D/A output. 24* GPDAC Output ADAVDD/2 25* CONT4 Input/Output Input Mode 26 CONT5 Input/Output Input Mode 27* SBCK/CONT6 Input/Output Input Mode Servo D/A general-purpose output terminal. Controlled by commands from the microcomputer. When not used, set General-purpose I/O terminal 5. them as input terminals and connect General-purpose I/O terminal 6 or to 0 V, or set them as output Subcode reading clock input terminal. terminals and leave open. 28 SBCK/FG Input — Subcode reading clock input terminal/FG signal input terminal/external emphasis setting terminal. Terminal functions are set by commands. When not used, connect to 0 V. 29* DEFECT Output L Defect terminal. 30* V/*P Output H Auto switching monitor output terminal for rough servo phase control. “H”: rough servo, “L”: phase servo. 31* FSEQ Output L Sync signal detection output terminal. The status changes to “H” when the sync signal detected in EFM and the sync signal of internal generation are identified. 32* MONI1 Output L Internal signal monitor terminal 1. 33* MONI2 Output L Internal signal monitor terminal 2. 34* MONI3 Output L Internal signal monitor terminal 3. 35* MONI4 Output L Internal signal monitor terminal 4. 36* MONI5 Output L Internal signal monitor terminal 5. 37 VSS — — Digital system earth terminal. To be connected to 0 V. 38 VDD Input — Digital system power terminal. LPF capacitor connection terminal for TE signal. General-purpose I/O terminal 4. 39* DOUT Output L Digital OUT output terminal. (EIAJ format) 40 TEST Input L Input terminal for test. To be connected to 0 V. 41 LVDD Input — 42 LCHO Output LVDD/2 43 LVSS — — Power supply for Left channel. Left channel D/A converter Left channel output. GND for Left channel. Must be connected to 0 V. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 41 – CD-E700/CD-E77 IC1 VHiLC78646E-1: CD Servo (LC78646E) (2/2) Pin No. Terminal Name Input/Output Setting in Reset 44 RVSS — — 45 RCHO Output LVDD /2 46 RVDD Input — 47 XVDD Input — 48 XOUT Output — 49 XIN Input — 50 FSX/16MIN Input/Output Input 51 XVSS — — 52* C2F Output H C2 FLAG monitor port. 53* EFLG Output L C1, C2 error corrected monitor port. 54* 16MOUT Output Clock 55 ASLRCK Input — 56 ASDACK Input — 57 ASDFIN Input — 58* LRCK Output L 59* BCK Output L 60* DATA Output L Left/Right channel data output port. 61 CE Input — Chip enable signal input port. 62 CL Input — Microcomputer 63 DI Input — Interface 64 DO Output (H) 65 *WRQ Output H Interruption signal output. 66 *RES Input — Chip reset signal input port. This port must be set LOW after first applied power on. 67 DRF Output L Focus detection output port. 68 VDD5 Input — Power supply for Microprocessor. 69 VSS — — 70 CONT3 Input/Output Input 71 CONT2 Input/Output Input 72 CONT1 Input/Output Input 73 PDO1 Output — 74 PDO2 Output Input 75 VVSS — — 76 PCKIST Input — 77 VVDD Input — Power supply for internal VCO. 78 FR Input — VCO frequency range adjustment port. 79 LDS Input — LASER power detected signal input port. 80 LDD Output — LASER power control signal output port. Function Right channel D/A converter GND for Right channel. Must be connected to 0 V. Right channel output. Power supply for Right channel. Power supply for crystal oscillator. Crystal Oscillator Connected for the 33.8688 MHz crystal oscillator ciement. 7.35 kHz Synchronization signal monitor port. or Clock input port for Digital filter & D/A Crystal Oscillator GND for crystal oscillator. Must be connected to 0 V. 16.9344 MHz output port. Word clock input port. (If this port does not use, must be connect to 0 V.) Anti-shock Bit clock input port. (If this port does not use, must be connect to 0 V.) Left/Right channel data input port. (If this port does not use, must be connect to 0 V.) Word clock output port. Digital data Bit clock output port. Data transfer clock input port. Data input port. Data output port. (N-ch. open drain output.) GND for digital circuit. Must be connected to 0 V. General purpose port 1. Controlled with serial data command from microcomputer. When not used, General purpose input/ General purpose port 2. output terminal 7. set it as the input terminal and open it by connecting to 0 V, or set it as the output terminal General purpose port 3. and open it. Internal VCO control phase comparator output port 1. Internal VCO control phase comparator output port 2. PLL GND for internal VCO. Must be connected to 0 V. PDO output current adjustment resistor connection port. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. Be sure to supply the same potential to each power terminal. (VVDD, ADAVDD, VDD, LVDD, RVDD, XVDD) Terminal witch is controlled by the power terminal (VDD5 V) for a microcomputer interface : CE (61 pin), CL (62 pin), DI (63 pin), DO (64 pin), WRQ (65 pin), RES (66 pin), DRF (67 pin) – 42 – CD-E700/CD-E77 LDD LDS FR VVDD PCKIST VVSS PD02 PD01 CONT1 CONT2 CONT3 VSS VDD5 DRF *RES *WRQ DO DI CL CE IC1 VHiLC78646E-1: CD Servo (LC78646E) 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 SLCO 1 60 DATA SLCIST 2 59 BCK EFMIN 3 58 LRCK RF 4 57 ASDFIN RFVDD 5 56 ASDACK RFVSS 6 55 ASLRCK FIN1 7 54 16MOUT FIN2 8 53 EFLG TIN1 9 52 C2F TIN2 10 51 XVSS LC78646E VREF 11 50 FSX/16MIN REF1 12 49 XIN 35 36 37 FIN1 + – FIN2 + – TIN1 + – TIN2 + – MIX MONI3 MONI4 (3.3V)VSS AGC 38 39 40 TEST 34 VDD 32 33 DOUT 31 MONI5 29 30 RF 28 TEC 26 27 MONI2 25 MONI1 24 TE 23 V/*P 22 FE FDO 21 FSEQ 41 LVDD DEFECT 42 LCHO TDO 20 SBCK/FG 43 LVSS ADAVSS 19 SBCK/CONT6 44 RVSS ADAVDD 18 CONT5 45 RCHO JITTC 17 CONT4 46 RVDD RFMON 16 SLDO 47 XVDD TE 15 GPDAC 48 XOUT TEC 14 SPDO FE 13 EQ RFVDD RFVSS PH + – LPF TBAL + BH LPF SW + – LPF + – + – – TBAL LEVEL SET MONI CONT – + REF1 RFMON RAM VREF DETECT TRACK JUMP ADIN ADAVDD ADAVSS SERVO PROCESSOR A/D LDS JITTER DETECT JITTC SLCO EFMIN SLCIST SW DRF XIN XOUT 16MOUT XVDD XVSS *RES *WRQ CL CE DI DO VDD5V CONT1, 2, 3 CONT4, 5 SBCK/CONT6 VDD RUPTURE DEFECT PLL VCEC FRAME SYNC DETECT,PROTECT INSERT, EFN DECODE CLV,CAV CONTROL SBCK/FG FD0 TD0 SLD0 SPD0 GPDAC D/A S/H SLICE LEVEL CONTROL PCK PDO1 PDO2 FR PCKIST VVDD VVSS LDD APC AUTO ADJUST DRF FSEQ V/*P SUBCODE DECODE CRC CLOCK MONITOR SIGNAL SELECTOR VDD VSS MONI1~5 GENERATOR RAM ERROR COMMAND CORRECTION INTERFACE AUDIO CD FSK/16MIN C2F EFLG AUDIO OUT DOUT 8FS DIGITAL FILTER INTERPOLATION MUTE ATTENUATION DEEMPHSIS SERIAL OUT LRCK BCK DATA 1bit DAC LPF EXTERNAL AUDIO IN GENERAL-PURPOSE PORTS RVDD RVSS RCHO LCHO LVDD LVSS TEST Figure 43 BLOCK DIAGRAM OF IC – 43 – ASLRCK ASDQCK ASDFIN CD-E700/CD-E77 DI CLK VDD VREF 2 1 24 23 22 CCB INTERFACE LTRE 6 20 RBASS CONTROL CIRCUIT CONTROL CIRCUIT LBASS 5 21 ROUT CONTROL CIRCUIT LOUT 4 RVref CE 3 LVref VSS IC601 VHiLC75341/-1: Audio Processor (LC75341) 19 RTRE 18 RIN LIN 7 LSEL0 8 L2 L1 R1 R2 R3 R4 RTRB R2 L3 R3 L4 R4 16 RSEL0 15 RIN 14 RBASS 13 ROUT 12 VREF 11 VDD 10 CLK 9 R1 Video Tape Tuner 24 23 22 21 20 19 18 17 16 15 14 13 VSS LOUT LBASS 7 8 9 10 11 12 Figure 44 BLOCK DIAGRAM OF IC – 44 – L1 CE 6 L3 5 L4 4 LSEL0 3 LIN 2 LTRE 1 DI LC75341 L2 CD 17 RSEL0 CD-E700/CD-E77 IC701 RH-iX0553AWZZ: System Microcomputer (IX0553AW) (1/2) Pin No. 1 Port Name VDD Terminal Name VDD Input/Output Input Function (+) Power supply. 2 P37 -20dBATT Output -20dB Attenuator. 3* P36 SUB_CE Output MP3 sub microcomputer. 4 P35 T_BIAS Output Tape record bias. 5 P34 T_T1/T2 Output Tape T1/T2 change. 6 P33 T_REC/PLY Output Tape REC/PLAY change. 7 P32 CD_RESOUT Output CD DSP reset. 8 P31 CD WRQ Input CD write read request.. 9* P30 NO USE Input Connect to GND. 10 RESET RESET Input Reset. 11 X2 X2 Output Main clock. 12 X1 X1 Input Main clock. 13 VPP/IC VPP/IC — GND 14* XT2 XT2 — Open 15 P04 CD_DRF Input CD DRF level detection. 16 VDD VDD Input (+) Power supply. 17 P27 CD_CLK Output CD DSP clock. 18 P26 CD_DI Output CD DSP command. 19 P25 CD_DO Input 20 P24 CD_CE Output CD DSP CE output. 21 P23 CE Output CE output. 22 P22 CLK Output Clock output. 23 P21 DI Output Data output. 24 P20 DO Input — CD DSP CODE Q out. Data input. 25 AVSS AVSS 26 P17 D.NO SW Input CD DISC No. SW Analog ground. 27* ANI6 NO USE Input Connect to GND. 28 ANI5 PLAY2/FPA/FPB SW Input Tape F.P A/B SW & PLAY 2 SW. 29 ANI4 PROTECT Input Power abnormal detect. 30 ANI3 LVL_DET Input Speaker output level detect. Key input. 31-33 ANI2-ANI0 KEY 2-KEY 0 Input 34 AVDD AVDD Input 35 AVREF AVREF — 36 INTP3 P_IN Input Power failure detect. 37 P02 CLAMP SW Input CD CLAMP SW. 38 INTP1 SP_DET Input Speaker abnormal detect. 39 INTP0 REMOCON Input Remocon input. 40 VSS VSS — Ground voltage. 41 P74 SMUTE Output System mute control. 42 P73 T_SOL B Output Tape 2 solenoid control. 43 P72 T_SOL A Output Tape 1 solenoid control. 44 P71 T_MOTOR Output Tape motor control. 45 P70 TIMER LED Output Timer LED control. 46 VDD VDD Input (+) Power supply. 47 P127 AC_RLY Output AC relay control. 48 P126 SP_RLY Output Speaker relay control. 49 P125 JOG 1 Input Volume jog input 1. 50 P124 JOG 2 Input Volume jog input 2. 51 P123 T 2_RUN Input TAPE 2 RUN PULSE input. 52 P122 T 1_RUN Input TAPE 1 RUN PULSE input. 53* P121 MONST LED Analog VDD. Analog ref voltage. Output Monster LED. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 45 – CD-E700/CD-E77 IC701 RH-iX0553AWZZ: System Microcomputer (IX0553AW) (2/2) Pin No. Port Name Terminal Name Input/Output Function 54 P120 O/C SW Input CD OPEN/CLOSE SW. 55 P117 MIC SW 56* P116 KARA_LATCH Output Input Mic switch input. Karaoke latch. (When not used. Connect to 0 V.) 57* P115 NO USE Output Open. 58* P114 NO USE Output Open. 59* P113 NO USE Output Open. 60* P112 NO USE Input Open. 61* P111 NO USE Output Open. 62* P110 NO USE Input 63 P107 ILU_LED1 Output Illumination LED1. 64* P106 ILU_LED2 Output Illumination LED2. 65* P105 ILU_LED3 Output Illumination LED3. 66* P104 FOR PLY_LED Output Forward play LED. 67* P103 REV PLY_LED Output Reverse play LED. Output Open. 68* P102 STOP_LED 69 FIP30 DIST Input Stop LED. 70 FIP29 S21 Output 71-74 P97-P94 DIST 0-DIST 3 Output Distination output. 75-78 FIP24-FIP21 S16-S13 Output FL segment driver. 79 VLOAD VLOAD Input 80-91 FIP20-FIP9 S12-S1 Output FL segment driver. 92-100 FIP8-FIP0 G9-G1 Output FL grid driver. Distination input. FL segment driver. FL driver power supp. -30 V In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 46 – CD-E700/CD-E77 FL DISPLAY FL701 VVKNA09SS29-1 GRID ASSIGNMENT 2G 3G X-BASS 4G MP3 5G 1 6G 3 2 8G 7G 9G REC ST SLEEP RDS EON kHz TP TI PTYIPTY MHz TA MEMORY col S2 1G S1 S3 S4 a h j k f b g m e c p r n Dp d (1G~8G) ANODE CONNECTION 1G P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 2G 3G X-BASS MP3 4G 5G 6G 2 3 col 1 7G 8G S1 S2 S3 S4 a S1 S2 S3 S4 a S1 S2 S3 S4 a S1 S2 S3 S4 a S1 S2 S3 S4 a S1 S2 S3 S4 a S1 S2 S3 S4 a S1 S2 S3 S4 a b k j b k j b k j b k j b k j b k j b k j b k j h f m d g p e n r c Dp h f m d g p e n r c Dp h f m d g p e n r c Dp h f m d g p e n r c Dp h f m d g p e n r c Dp h f m d g p e n r c Dp h f m d g p e n r c Dp h f m d g p e n r c Dp REC ST – 47 – 9G PTYI TA TP RDS TI MEMORY PTY ) ( MHz kHz EON PRO LOGIC (L) (R) SLEEP CD-E700/CD-E77 –– MEMO –– – 48 – CD-E700/CD-E77 PARTS GUIDE MINI COMPONENT SYSTEM MODEL CD-E700 CD-E700 Mini Component System consisting of CD-E700 (main unit) and CP-E700 (speaker system). MINI COMPONENT SYSTEM MODEL CD-E77 CD-E77 Mini Component System consisting of CD-E77 (main unit) and CP-E77 (speaker system). “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call Toll-Free; 1-800-BE-SHARP MARK: SPARE PARTS-DELIVERY SECTION Explanation of capacitors/resistors parts codes Capacitors Resistors VCC ....................... Ceramic type VCK ........................ Ceramic type VCT ........................ Semiconductor type VC • • MF ............... Cylindrical type (without lead wire) VC • • MN ............... Cylindrical type (without lead wire) VC • • TV ................ Square type (without lead wire) VC • • TQ ............... Square type (without lead wire) VC • • CY ............... Square type (without lead wire) VC • • CZ ............... Square type (without lead wire) VC • • • • • • • • • J .. The 13th character represents capacity difference. ("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%, "C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.) VRD ....................... Carbon-film type VRS ........................ Carbon-film type VRN ....................... Metal-film type VR • • MF ............... Cylindrical type (without lead wire) VR • • MN ............... Cylindrical type (without lead wire) VR • • TV ................ Square type (without lead wire) VR • • TQ ............... Square type (without lead wire) VR • • CY ............... Square type (without lead wire) VR • • CZ ............... Square type (without lead wire) VR • • • • • • • • • J .. The 13th character represents error. ("J" ±5%, "F" ±1%, "D" ±0.5%.) If there are no indications for the electrolytic capacitors, error is ±20%. If there are no indications for other parts, the resistors are ±5% carbon-film type. CAUTION:FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH SAME TYPE F801, F802 4A, 125V / F803, F804 2A, 125V / F805 4A, 125V FUSES ATTENTION:POUR ASSURER UNE LONGUE PROTECTION CONTRE UNINCENDIE, REMPLACER SEULEMENT PAR UN FUSIBLE DE TYPE F801, F802 4A, 125V / F803, F804 2A, 125V / F805 4A, 125V NOTE: Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace parts with specified ones for maintaining the safety and performance of the set. CD-E700/CD-E77 NO. PRICE RANK PART CODE DESCRIPTION NO. PRICE RANK PARTS CODE TRANSFORMERS CD-E700/CD-E77 INTEGRATED CIRCUITS IC1 IC2 VHILC78646E-1 VHILA6574H+-1 J J IC101 VHIAN7345K/-1 J IC301 IC302 IC303 VHITA7358AP-1 VHILC72131/-1 VHILA1832S/-1 J J J IC601 IC701 VHILC75341/-1 RH-IX0553AWZZ J J IC851 IC852 IC853 IC854 IC855 IC901 VHIKIA7812AP1 VHIKIA7810AP1 VHIKIA7805AP1 VHIAN78L05/-1 VSKTC2026//-1 VHISTK41242-1 J J J J J J AY CD Servo,LC78646E AN Focus/Tracking/Spin/Sled Driver, LA6574H AM Playback and Record/Playback Amp.,AN7345K AG FM Front End,TA7358AP AP PLL (Tuner),LC72131 AN FM IF Det./FM Mpx./AM IF, LA1832S AM Audio Processor,LC75341 AX System Microcomputer, IX0553AW AF Voltage Regulator,KIA7812AP AF Voltage Regulator,KIA7810AP AF Voltage Regulator,KIA7805AP AE Voltage Regulator,AN78L05 AF Silicon,NPN,KTC2026 BB Power Amp.,STK41242 VSKTA1266GR-1 VSKTA1271Y/-1 VSKTC3200GR-1 VSKTC3199GR-1 VSKTA1266GR-1 VSKRC104M//-1 VSKTC3203Y/-1 VSKTA1266GR-1 VSKRC104M//-1 VSKTC3194Y/-1 VSKTA1266GR-1 VSKTC3199GR-1 VSKTA1273Y/-1 VSKRC102M//-1 VSKTA1274Y/-1 VSKTC3199GR-1 VSKTC3199GR-1 VSKTC3203Y/-1 J J J J J J J J J J J J J J J J J J AB AC AC AB AB AC AC AB AC AD AB AB AE AC AE AB AB AC Silicon,PNP,KTA1266 GR Silicon,PNP,KTA1271 Y Silicon,NPN,KTC3200 GR Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1266 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3203 Y Silicon,PNP,KTA1266 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3194 Y Silicon,PNP,KTA1266 GR Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1273 Y Digital,NPN,KRC102 M Silicon,PNP,KTA1274 Y Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3203 Y VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDD10XB60F-1 VHD1N4004S/-1 VHD1N4004S/-1 VHDDS1SS133-1 VHDDS1SS133-1 VHD1N4004S/-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHD1N4004S/-1 VHDDS1SS133-1 VHP304VT2E1-1 VHPA503BC2E-1 VHEDZ3R3BSB-1 VHEDZ5R1BSB-1 VHEDZ6R2BSA-1 VHEDZ300BSB-1 VHEDZ8R2BSB-1 VHEDZ120BSB-1 J J J J J J J J J J J J J J J J J J J J J J J AB AB AB AL AB AB AB AB AB AB AB AB AB AB AB AC AN AB AC AB AB AB AB Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,D10XB60F Silicon,1N4004S Silicon,1N4004S Silicon,DS1SS133 Silicon,DS1SS133 Silicon,1N4004S Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,1N4004S Silicon,DS1SS133 LED,Red,304VT2E1 LED,White,A503BC2E Zener,3.3V,DZ3.3BSB Zener,5.1V,DZ5.1BSB Zener,6.2V,DZ6.2BSA Zener,30V,DZ30BSB Zener,8.2V,DZ8.2B Zener,12V,DZ12BSB RFILR0008AWZZ RFILF0124AFZZ RFILF0003AWZZ RFILA0009AWZZ J J J J AE AD AK AE Band Pass Filter FM IF,10.7 MHz FM IF AM IF 1 PT801 1 PT841 T301 T302 T303 T306 T351 RTRNP0467AWZZ RTRNP0483AWZZ RCILB0065AWZZ RCILI0017AWZZ RCILA0052AWZZ RCILB0067AWZZ RCILI0019AWZZ J J J J J J J BD AL AC AB AE AD AD Power Power OSC,FM FM IF AM Antenna AM OSC AM IF VP-XHR82K0000 VP-MK331K0000 RCILR0056AWZZ VP-DH101K0000 VP-DH101K0000 RCILZ0024AWZZ J J J J J J AC AB AB AB AB AC 0.82 µH,Choke 330 µH,Choke FM RF 100 µH,Choke 100 µH,Choke 3 µH,Choke COILS L1 L103 L312 L351,352 L701 L901,902 VARIABLE CAPACITORS VD301 VD302,303 VHCSVC348S/-1 VHCSVC211C/-1 J J AK Variable Capacitance,SVC348S AG Silicon,Variable Capacitance, SVC211C J J J J AF AF AE AH Crystal,456 kHz Crystal,4.5 MHz Ceramic,16.9344 MHz Crystal,4.194304 MHz J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AB AA AB AA AB AB AA AD AB AB AA AA AB AA AA AB AA AA AA AB AB AA AA AA AB AB AB AA AB AA AA AA AA AA AA AA AA AA AA AB AA AA AB AA AA AA 47 µF,25V,Electrolytic 0.01 µF,16V 47 µF,25V,Electrolytic 0.001 µF,50V 0.047 µF,50V,Mylar 0.1 µF,16V 0.0027 µF,16V 3.3 µF,16V,Electrolytic 10 µF,25V,Electrolytic 0.22 µF,50V,Electrolytic 100 pF,50V 0.022 µF,25V 100 µF,10V,Electrolytic 0.001 µF,50V 330 µF,6.3V,Electrolytic 100 µF,10V,Electrolytic 0.022 µF,25V 0.001 µF,50V 0.01 µF,16V 10 µF,25V,Electrolytic 0.0015 µF,50V,Mylar 0.022 µF,25V 100 pF,50V 100 pF,50V 0.047 µF,50V,Mylar 0.22 µF,50V,Electrolytic 0.1 µF,16V 0.01 µF,16V 100 µF,10V,Electrolytic 0.01 µF,16V 0.022 µF,25V 0.001 µF,50V 22 pF (CH),50V 0.001 µF,50V 560 pF,50V 180 pF,50V 180 pF,50V 560 pF,50V 330 pF,50V 47 µF,25V,Electrolytic 0.033 µF,25V 560 pF,50V 47 µF,25V,Electrolytic 0.0022 µF,16V 0.022 µF,25V 270 pF,50V TRANSISTORS Q1 Q4 Q101~104 Q105~108 Q109 Q110 Q111 Q112 Q113,114 Q302 Q360 Q601~604 Q706~708 Q709,710 Q801 Q841 Q901~905 Q906 DIODES D301,302 D305 D709~715 D801,802 D803~806 D842~845 1 D846 D851,852 D853 D855 D856 D857~859 D905~907 D909,910 D911,912 LED701 LED703,704 ZD1 ZD351 ZD801 ZD803 ZD852 ZD902,903 FILTERS BF301 CF303 CF351 CF352 DESCRIPTION VIBRATORS X351 X352 XL1 XL701 92LCRSTL1425A RCRSP0019AWZZ RCRM-0047AWZZ RCRSP0003AWZZ CAPACITORS C1 C2 C3 C4 C5 C6 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C19 C20,21 C22 C23,24 C25,26 C27 C28~30 C33 C35 C36 C37 C38 C39~41 C42 C43 C44 C45 C48 C101,102 C103 C104 C105,106 C107~110 C111,112 C113,114 C115,116 C117,118 C119,120 C121 C123,124 –1– VCEAZA1EW476M VCTYMN1CY103N VCEAZA1EW476M VCKYMN1HB102K VCQYKA1HM473J VCTYPA1CX104K VCTYMN1CX272K RC-EZ0004AWZZ RC-EZY106AF1E RC-EZY224AF1H VCKYMN1HB101K VCTYMN1EF223Z RC-EZY107AF1A VCKYMN1HB102K RC-EZY337AF0J VCEAZA1AW107M VCTYMN1EF223Z VCKYMN1HB102K VCTYMN1CY103N RC-EZY106AF1E VCQYKA1HM152K VCTYMN1EF223Z VCKYMN1HB101K VCKYMN1HB101K VCQYKA1HM473J VCEAZA1HW224M VCTYPA1CX104K VCTYMN1CY103N VCEAZA1AW107M VCTYMN1CY103N VCTYMN1EF223Z VCKYMN1HB102K VCCCMN1HH220J VCKYMN1HB102K VCKYMN1HB561K VCKYBT1HB181K VCKYMN1HB181K VCKYMN1HB561K VCKYMN1HB331K VCEAZA1EW476M VCTYPA1EX333K VCKYMN1HB561K VCEAZA1EW476M VCTYMN1CX222K VCTYMN1EF223Z VCKYMN1HB271K CD-E700/CD-E77 NO. C125,126 C127,128 C129,130 C131,132 C133 C134 C135 C137 C138 C139 C140 C141 C143 C150 C302 C303 C304 C305 C306 C307 C308 C309 C310 C311 C312 C313 C314,315 C316 C317 C318 C320 C323 C324 C330 C331 C332 C334 C335 C338 C342 C350,351 C352 C353,354 C355 C356 C357 C358 C361 C362 C363 C364 C365 C366 C367 C368 C369 C370~372 C373,374 C380 C381 C382 C383 C384 C385 C386 C387 C388 C389 C391 C392 C393 C394 C395 C396 C397 C398 C399 C601 C602 C603 C605~608 C609,610 PART CODE VCEAZA1HW226M VCTYPA1CX223K VCTYMN1CX332K VCEAZA1EW476M VCEAZA1HW226M VCEAZA1AW227M VCTYMN1EF223Z VCQYKA1HM473K VCQPKA2AA822J VCQYKA1HM393K VCEAZA1EW476M VCEAZA1CW107M VCEAZA1HW335M VCEAZA1HW476M VCKYMN1HB102K VCCCMN1HH100J VCTYMN1CY103N VCCCMN1HH4R7C VCTYMN1EF223Z VCEAZA1HW106M VCCCMN1HH4R7C VCKYMN1HB102K VCCCMN1HH150J VCCSMN1HL180J VCTYMN1EF223Z VCCCMN1HH220J VCTYMN1CX472K VCTYMN1EF223Z VCKYMN1HB102K VCKYMN1HB101K VCKYBT1HB102K VCTYMN1EF223Z VCCUMN1HJ4R7D VCCUMN1HJ150J VCKZPA1HF473Z VCTYMN1EF223Z VCCCMN1HH220J VCKYMN1HB561K VCKYMN1HB102K VCTYMN1EF223Z VCTYMN1EF223Z VCEAZA1HW106M VCTYMN1EF223Z VCCSMN1HL220J VCKYMN1HB102K VCEAZA1HW225M VCEAZA1HW105M VCTYMN1EF223Z VCEAZA1HW335M VCTYMN1EF223Z VCEAZA1HW225M VCKZPA1HF223Z VCKYMN1HB102K VCEAZA1HW105M VCEAZA1HW105M VCCUMN1HJ270J VCEAZA1HW105M VCTYPA1CX153K VCEAZA1HW106M VCCCMN1HH120J VCCCMN1HH150J VCCSBT1HL470J VCKYMN1HB102K VCTYMN1CY103N VCKYMN1HB331K VCTYMN1EF223Z VCKYMN1HB102K VCKYBT1HB102K VCEAZA1EW476M VCKYMN1HB102K VCEAZA1HW105M VCEAZA1EW476M VCTYMN1EF223Z VCEAZA1AW107M VCTYMN1EF223Z VCEAZA1AW107M VCTYMN1EF223Z VCEAZA1CW227M VCKZPA1HF223Z VCEAZA1HW226M VCFYHA1HA124J VCEAZA1HW105M J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J PRICE RANK DESCRIPTION AB AA AA AB AB AC AA AB AA AB AB AC AB AB AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AB AB AA AB AA AB AA AA AB AB AA AB AA AB AA AA AA AA AA AA AA AA AA AB AA AB AB AA AB AA AB AA AC AA AB AB AB 22 µF,50V,Electrolytic 0.022 µF,16V 0.0033 µF,16V 47 µF,25V,Electrolytic 22 µF,50V,Electrolytic 220 µF,10V,Electrolytic 0.022 µF,25V 0.047 µF,50V,Mylar 0.0082 µF,100V,Polypropylene 0.039 µF,50V,Mylar 47 µF,25V,Electrolytic 100 µF,16V,Electrolytic 3.3 µF,50V,Electrolytic 47 µF,50V,Electrolytic 0.001 µF,50V 10 pF (CH),50V 0.01 µF,16V 4.7 pF (CH),50V 0.022 µF,25V 10 µF,50V,Electrolytic 4.7 pF (CH),50V 0.001 µF,50V 15 pF (CH),50V 18 pF,50V 0.022 µF,25V 22 pF (CH),50V 0.0047 µF,16V 0.022 µF,25V 0.001 µF,50V 100 pF,50V 0.001 µF,50V 0.022 µF,25V 4.7 pF (UJ),50V 15 pF (UJ),50V 0.047 µF,50V 0.022 µF,25V 22 pF (CH),50V 560 pF,50V 0.001 µF,50V 0.022 µF,25V 0.022 µF,25V 10 µF,50V,Electrolytic 0.022 µF,25V 22 pF,50V 0.001 µF,50V 2.2 µF,50V,Electrolytic 1 µF,50V,Electrolytic 0.022 µF,25V 3.3 µF,50V,Electrolytic 0.022 µF,25V 2.2 µF,50V,Electrolytic 0.022 µF,50V 0.001 µF,50V 1 µF,50V,Electrolytic 1 µF,50V,Electrolytic 27 pF (UJ),50V 1 µF,50V,Electrolytic 0.015 µF,16V 10 µF,50V,Electrolytic 12 pF (CH),50V 15 pF (CH),50V 47 pF,50V 0.001 µF,50V 0.01 µF,16V 330 pF,50V 0.022 µF,25V 0.001 µF,50V 0.001 µF,50V 47 µF,25V,Electrolytic 0.001 µF,50V 1 µF,50V,Electrolytic 47 µF,25V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 0.022 µF,25V 220 µF,16V,Electrolytic 0.022 µF,50V 22 µF,50V,Electrolytic 0.12 µF,50V,Thin Film 1 µF,50V,Electrolytic NO. –2– C611,612 C613,614 C615,616 C617~624 C625,626 C639 C640 C651~653 C690,691 C701 C702 C704 C705 C707 C709,710 C712 C714 C715 C717 C720,721 C801 C802,803 C804 C805 C806~809 C810,811 C841 C842 C843 1 C844 C851 C854,855 C856 C858,859 C861 C863 C864 C865 C901,902 C903,904 C905,906 C907 C908 C909 C910 C911,912 C913 C914,915 C916 C917 C918 C919 C920 C921,922 C923 C925 C928,929 C931 C946 PRICE RANK PARTS CODE VCTYMN1CX222K VCEAZA1HW105M VCEAZA1HW475M VCEAZA1HW105M VCTYMN1CX222K VCEAZA1HW105M VCEAZA1HW226M VCKYMN1HB221K VCKYMN1HB391K VCEAZA1HW105M VCEAZA1AW227M VCCSMN1HL150J VCCSMN1HL180J VCEAZA1HW105M VCTYMN1CX472K VCEAZA1EW476M VCEAZA1HW335M VCTYMN1EF103Z VCEAZA1EW476M VCTYMN1EF223Z VCEAZA1VW107M VCEAZA1HW476M VCEAZA1JW227M VCEAZA2AW226M VCQYKA1HM104K VCQYKU2AM224K VCEAZA0JW108M VCEAZA1VW477M VCQYKA1HM473K RC-KZ002LAWZZ VCQYKA1HM104K VCQYKA1HM104K VCEAZW1VW338M VCQYKA1HM104K VCKZPA1HF223Z VCEAZA1HW226M VCQYKA1HM104K VCEAZA1HW106M VCEAZA1HW104M VCKYMN1HB102K VCEAZA1HW226M VCKYMN1HB101K VCCCMN1HH3R3C VCQYKA1HM104K VCCCMN1HH3R3C VCEAZA2AW107M VCKYMN1HB101K VCEAZA2AW107M VCEAZA1HW107M VCQYKA1HM103K VCEAZA1HW107M VCQYKA1HM103K RC-EZ0029AWZZ RC-EZ0106AWZZ RC-EZ0029AWZZ VCEAZA1HW476M VCQYKA1HM104K VCEAZA1HW106M VCEAZA1HW104M DESCRIPTION J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AB AB AB AA AB AB AA AA AB AC AA AA AB AA AB AB AB AB AA AC AB AD AC AB AB AC AD AB AC AB AB AH AB AA AB AB AB AB AA AB AA AA AB AA AD AA AD AC AA AC AA AN AH AN AB AB AB AB 0.0022 µF,16V 1 µF,50V,Electrolytic 4.7 µF,50V,Electrolytic 1 µF,50V,Electrolytic 0.0022 µF,16V 1 µF,50V,Electrolytic 22 µF,50V,Electrolytic 220 pF,50V 390 pF,50V 1 µF,50V,Electrolytic 220 µF,10V,Electrolytic 15 pF,50V 18 pF,50V 1 µF,50V,Electrolytic 0.0047 µF,16V 47 µF,25V,Electrolytic 3.3 µF,50V,Electrolytic 0.01 µF,25V 47 µF,25V,Electrolytic 0.022 µF,25V 100 µF,35V,Electrolytic 47 µF,50V,Electrolytic 220 µF,63V,Electrolytic 22 µF,100V,Electrolytic 0.1 µF,50V,Mylar 0.22 µF,100V,Mylar 1000 µF,6.3V,Electrolytic 470 µF,35V,Electrolytic 0.047 µF,50V,Mylar 0.0047 µF,250V,Ceramic 0.1 µF,50V,Mylar 0.1 µF,50V,Mylar 3300 µF,35V,Electrolytic 0.1 µF,50V,Mylar 0.022 µF,50V 22 µF,50V,Electrolytic 0.1 µF,50V,Mylar 10 µF,50V,Electrolytic 0.1 µF,50V,Electrolytic 0.001 µF,50V 22 µF,50V,Electrolytic 100 pF,50V 3.3 pF (CH),50V 0.1 µF,50V,Mylar 3.3 pF (CH),50V 100 µF,100V,Electrolytic 100 pF,50V 100 µF,100V,Electrolytic 100 µF,50V,Electrolytic 0.01 µF,50V,Mylar 100 µF,50V,Electrolytic 0.01 µF,50V,Mylar 3300 µF,71V,Electrolytic 4700 µF,35V,Electrolytic 3300 µF,71V,Electrolytic 47 µF,50V,Electrolytic 0.1 µF,50V,Mylar 10 µF,50V,Electrolytic 0.1 µF,50V,Electrolytic J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 0 ohm,Jumper,ø1.4×3.5mm,Ivory 8.2 kohms,1/8W 22 kohms,1/8W 8.2 kohms,1/8W 22 kohms,1/8W 47 ohms,1/6W 10 kohm,1/6W 10 ohm,1/8W 27 kohms,1/8W 10 kohm,1/8W 330 ohms,1/8W 15 kohms,1/6W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 15 kohms,1/6W 10 kohm,1/8W 1 ohm,1/4W 100 ohm,1/6W RESISTORS R1,2 R3 R4,5 R6 R7 R8 R9 R10 R11 R12 R13 R14,15 R16 R18 R19 R20 R21 R22 VRD-MN2BD000C VRD-MN2BD822J VRD-MN2BD223J VRD-MN2BD822J VRD-MN2BD223J VRD-ST2CD470J VRD-ST2CD103J VRD-MN2BD100J VRD-MN2BD273J VRD-MN2BD103J VRD-MN2BD331J VRD-ST2CD153J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD153J VRD-MN2BD103J VRD-ST2EE1R0J VRD-ST2CD101J CD-E700/CD-E77 NO. R24,25 R26,27 R28,29 R31 R32~38 R39,40 R41 R42 R43 R46 R101,102 R103,104 R105,106 R107,108 R109,110 R111 R112 R113,114 R115,116 R117,118 R119,120 R121,122 R123,124 R126,127 R128,129 R130,131 R132,133 R134,135 R136 R137 R138 R139 R140 R141 R142 R143 R144 R145 R146 R147 R148 R149 R150 R158 R302 R309 R311 R313 R314 R316 R322 R323 R325 R327 R336 R350 R351 R352 R353 R355 R356 R357 R358 R359 R360 R365 R372~374 R375 R376 R377 R378 R379 R380 R381 R382 R383 R384 R385 R386 R387 R388 R391,392 PRICE RANK PART CODE VRD-MN2BD222J VRD-MN2BD103J VRD-ST2CD222J VRD-ST2CD472J VRD-ST2CD102J VRD-MN2BD681J VRD-MN2BD123J VRD-MN2BD122J VRD-MN2BD221J VRD-ST2EE1R0J VRD-MN2BD102J VRD-MN2BD222J VRD-MN2BD332J VRD-MN2BD473J VRD-MN2BD472J VRD-ST2CD153J VRD-MN2BD153J VRD-ST2CD102J VRD-ST2CD560J VRD-MN2BD104J VRD-MN2BD392J VRD-MN2BD123J VRD-MN2BD562J VRD-MN2BD472J VRD-MN2BD562J VRD-MN2BD152J VRD-MN2BD101J VRD-MN2BD103J VRD-ST2CD224J VRD-MN2BD224J VRD-ST2CD103J VRD-MN2BD103J VRD-MN2BD473J VRD-ST2CD472J VRD-RT2HD820J VRD-MN2BD473J VRD-MN2BD223J VRD-ST2CD4R7J VRD-MN2BD103J VRD-MN2BD103J VRD-MN2BD472J VRD-ST2EE151J VRD-MN2BD683J VRD-ST2EE221J VRD-MN2BD100J VRD-ST2CD103J VRD-MN2BD104J VRD-MN2BD333J VRD-ST2CD220J VRD-MN2BD472J VRD-MN2BD681J VRD-MN2BD683J VRD-MN2BD473J VRD-MN2BD330J VRD-MN2BD103J VRD-MN2BD272J VRD-MN2BD562J VRD-MN2BD102J VRD-MN2BD271J VRD-MN2BD332J VRD-MN2BD102J VRD-ST2CD474J VRD-ST2CD392J VRD-MN2BD182J VRD-MN2BD472J VRD-MN2BD103J VRD-MN2BD102J VRD-ST2CD471J VRD-MN2BD102J VRD-MN2BD473J VRD-MN2BD102J VRD-MN2BD222J VRD-MN2BD152J VRD-MN2BD103J VRD-ST2EE151J VRD-MN2BD562J VRD-ST2CD562J VRD-MN2BD562J VRD-ST2CD223J VRD-ST2CD562J VRD-MN2BD392J VRD-ST2EE271J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 2.2 kohms,1/8W 10 kohm,1/8W 2.2 kohms,1/6W 4.7 kohms,1/6W 1 kohm,1/6W 680 ohms,1/8W 12 kohms,1/8W 1.2 kohms,1/8W 220 ohms,1/8W 1 ohm,1/4W 1 kohm,1/8W 2.2 kohms,1/8W 3.3 kohms,1/8W 47 kohms,1/8W 4.7 kohms,1/8W 15 kohms,1/6W 15 kohms,1/8W 1 kohm,1/6W 56 ohms,1/6W 100 kohm,1/8W 3.9 kohms,1/8W 12 kohms,1/8W 5.6 kohms,1/8W 4.7 kohms,1/8W 5.6 kohms,1/8W 1.5 kohms,1/8W 100 ohm,1/8W 10 kohm,1/8W 220 kohms,1/6W 220 kohms,1/8W 10 kohm,1/6W 10 kohm,1/8W 47 kohms,1/8W 4.7 kohms,1/6W 82 ohms,1/2W 47 kohms,1/8W 22 kohms,1/8W 4.7 ohms,1/6W 10 kohm,1/8W 10 kohm,1/8W 4.7 kohms,1/8W 150 ohms,1/4W 68 kohms,1/8W 220 ohms,1/4W 10 ohm,1/8W 10 kohm,1/6W 100 kohm,1/8W 33 kohms,1/8W 22 ohms,1/6W 4.7 kohms,1/8W 680 ohms,1/8W 68 kohms,1/8W 47 kohms,1/8W 33 ohms,1/8W 10 kohm,1/8W 2.7 kohms,1/8W 5.6 kohms,1/8W 1 kohm,1/8W 270 ohms,1/8W 3.3 kohms,1/8W 1 kohm,1/8W 470 kohms,1/6W 3.9 kohms,1/6W 1.8 kohms,1/8W 4.7 kohms,1/8W 10 kohm,1/8W 1 kohm,1/8W 470 ohms,1/6W 1 kohm,1/8W 47 kohms,1/8W 1 kohm,1/8W 2.2 kohms,1/8W 1.5 kohms,1/8W 10 kohm,1/8W 150 ohms,1/4W 5.6 kohms,1/8W 5.6 kohms,1/6W 5.6 kohms,1/8W 22 kohms,1/6W 5.6 kohms,1/6W 3.9 kohms,1/8W 270 ohms,1/4W NO. R393 R395 R601 R602,603 R604 R605 R606,607 R608,609 R610,611 R612,613 R614,615 R616,617 R618 R619 R620,621 R641 R642 R643,644 R690,691 R692,693 R702 R703,704 R705 R706 R708~716 R717 R718~720 R721 R722 R724 R725 R726,727 R728 R729 R730 R731 R732 R733 R734~736 R739 R740 R746 R747 R749 R750 R751 R756 R757,758 R759 R761 R762 R763,764 R765 R766~768 R769 R770 R772,773 R775~780 R781 R782 R783 R791 R794,795 R801 R802 R803 R804,805 R806 R808 R841 R842 R843 R844 R852 R853,854 R856,857 R858 R859 R860 R901,902 R903,904 R905,906 –3– PRICE RANK PARTS CODE VRD-MN2BD102J VRD-MN2BD473J VRD-ST2CD102J VRD-ST2CD102J VRD-ST2CD103J VRD-MN2BD103J VRD-MN2BD392J VRD-MN2BD122J VRD-MN2BD222J VRD-MN2BD391J VRD-MN2BD332J VRD-MN2BD222J VRD-ST2CD331J VRD-MN2BD331J VRD-MN2BD223J VRD-MN2BD103J VRD-ST2CD103J VRD-MN2BD682J VRD-MN2BD682J VRD-MN2BD333J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD101J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-MN2BD102J VRD-ST2CD102J VRD-ST2CD681J VRD-ST2CD222J VRD-MN2BD561J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD102J VRD-ST2CD472J VRD-MN2BD102J VRD-MN2BD472J VRD-MN2BD331J VRD-ST2CD473J VRD-MN2BD331J VRD-MN2BD472J VRD-MN2BD102J VRD-ST2CD562J VRD-MN2BD103J VRD-ST2CD103J VRD-MN2BD102J VRD-ST2CD472J VRD-MN2BD103J VRD-MN2BD102J VRD-MN2BD103J VRD-MN2BD103J VRD-MN2BD103J VRD-MN2BD473J VRD-MN2BD104J VRD-ST2CD101J VRD-MN2BD472J VRD-ST2EE1R5J VRD-ST2CD104J VRD-ST2CD473J VRD-ST2CD123J VRD-ST2EE470J VRD-ST2CD473J VRD-RT2HD222J VRD-ST2CD224J VRD-ST2CD102J VRD-ST2CD473J VRD-ST2EE820J VRD-ST2CD103J VRD-ST2CD223J VRD-RT2HD3R3J VRD-ST2CD221J VRD-ST2CD223J VRD-ST2EE221J VRD-MN2BD563J VRD-MN2BD102J VRD-MN2BD561J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 1 kohm,1/8W 47 kohms,1/8W 1 kohm,1/6W 1 kohm,1/6W 10 kohm,1/6W 10 kohm,1/8W 3.9 kohms,1/8W 1.2 kohms,1/8W 2.2 kohms,1/8W 390 ohms,1/8W 3.3 kohms,1/8W 2.2 kohms,1/8W 330 ohms,1/6W 330 ohms,1/8W 22 kohms,1/8W 10 kohm,1/8W 10 kohm,1/6W 6.8 kohms,1/8W 6.8 kohms,1/8W 33 kohms,1/8W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 100 ohm,1/6W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 1 kohm,1/8W 1 kohm,1/6W 680 ohms,1/6W 2.2 kohms,1/6W 560 ohms,1/8W 1 kohm,1/8W 10 kohm,1/8W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 1 kohm,1/6W 4.7 kohms,1/6W 1 kohm,1/8W 4.7 kohms,1/8W 330 ohms,1/8W 47 kohms,1/6W 330 ohms,1/8W 4.7 kohms,1/8W 1 kohm,1/8W 5.6 kohms,1/6W 10 kohm,1/8W 10 kohm,1/6W 1 kohm,1/8W 4.7 kohms,1/6W 10 kohm,1/8W 1 kohm,1/8W 10 kohm,1/8W 10 kohm,1/8W 10 kohm,1/8W 47 kohms,1/8W 100 kohm,1/8W 100 ohm,1/6W 4.7 kohms,1/8W 1.5 ohms,1/4W 100 kohm,1/6W 47 kohms,1/6W 12 kohms,1/6W 47 ohms,1/4W 47 kohms,1/6W 2.2 kohms,1/2W 220 kohms,1/6W 1 kohm,1/6W 47 kohms,1/6W 82 ohms,1/4W 10 kohm,1/6W 22 kohms,1/6W 3.3 ohms,1/2W 220 ohms,1/6W 22 kohms,1/6W 220 ohms,1/4W 56 kohms,1/8W 1 kohm,1/8W 560 ohms,1/8W CD-E700/CD-E77 NO. R907 R908 R909 R910 R911 1 R912 R913 R916 R917 R918 R919,920 R921 R922 R925,926 R927,928 R929,930 R934,935 R937 R938~941 R942,943 R944,945 R946 R947 R949 R950 1 R958 R961 RD01 RD02 RD03 RD04 RD05 RD06 RD10 RD11 RD12 RD13 RD14 RD15 RD16 RD19 RD20 RD21 PRICE RANK PART CODE VRD-MN2BD563J VRD-MN2BD102J VRD-MN2BD333J VRD-MN2BD102J VRD-ST2CD563J VRG-ST2EC101J VRN-VV3LAR22J VRN-VV3LAR22J VRN-VV3LAR10J VRD-ST2CD152J VRD-ST2CD182J VRD-ST2CD152J VRN-VV3LAR10J VRD-RT2HD152J VRD-ST2EE393J VRD-ST2EE473J VRD-ST2CD563J VRD-ST2CD563J VRD-RT2HD100J VRS-VV3DA391J VRD-ST2CD152J VRD-ST2CD473J VRD-ST2CD153J VRD-ST2CD102J VRD-ST2CD683J VRG-ST2EC101J VRD-MN2BD1R0J VRD-ST2CD681J VRD-MN2BD821J VRD-MN2BD102J VRD-MN2BD152J VRD-MN2BD222J VRD-MN2BD272J VRD-MN2BD681J VRD-MN2BD821J VRD-MN2BD102J VRD-ST2CD152J VRD-MN2BD222J VRD-MN2BD272J VRD-MN2BD392J VRD-MN2BD681J VRD-ST2CD821J VRD-MN2BD102J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AB AC AC AD AA AA AA AD AA AA AA AA AA AA AC AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION NO. 56 kohms,1/8W 1 kohm,1/8W 33 kohms,1/8W 1 kohm,1/8W 56 kohms,1/6W 100 ohm,1/4W,Fusible 0.22 ohms,3W 0.22 ohms,3W 0.1 ohm,3W 1.5 kohms,1/6W 1.8 kohms,1/6W 1.5 kohms,1/6W 0.1 ohm,3W 1.5 kohms,1/2W 39 kohms,1/4W 47 kohms,1/4W 56 kohms,1/6W 56 kohms,1/6W 10 ohm,1/2W 390 ohms,2W 1.5 kohms,1/6W 47 kohms,1/6W 15 kohms,1/6W 1 kohm,1/6W 68 kohms,1/6W 100 ohm,1/4W,Fusible 1 ohm,1/8W 680 ohms,1/6W 820 ohms,1/8W 1 kohm,1/8W 1.5 kohms,1/8W 2.2 kohms,1/8W 2.7 kohms,1/8W 680 ohms,1/8W 820 ohms,1/8W 1 kohm,1/8W 1.5 kohms,1/6W 2.2 kohms,1/8W 2.7 kohms,1/8W 3.9 kohms,1/8W 680 ohms,1/8W 820 ohms,1/6W 1 kohm,1/8W FW802 FW901 JK690 JK701 JOG701 LG3 M1 M2 M3 M901 1 RL841 RL914 RX701 SO901 SW1 SW2 SW3 SW4 SW701 SW702 SW703 SW704 SW705 SW706 SW707 SW711 SW712 SW713 SW714 SW715 SW716 SW717 SW718 SW721 SW722 SW723 SW724 WTM701 WTM801,802 WTM901 QCNWN1572AWZZ QCNWN2465AWZZ QCNWN2466AWZZ QCNWN2505AWZZ QCNWN2505AWZZ QCNWN2469AWZZ QCNCM704GAWZZ QCNCM704HAWZZ 92LCONE6P53253 92LCONE6P53254 QCNCM705FAFZZ 92LCONE8P53254 92LCONEAP53254 QCNCM705CAFZZ QCNCM705GAFZZ 92LCONE3P5268 QCNCWZY16AWZZ QCNCWZX16AWZZ QCNCWZY07AWZZ 92LCONE2P53253 QCNCW012EAWZZ 92LCONEAP5267X QCNCW012FAWZZ 92LCONE2P53253 QCNWN1537AWZZ QCNWN1538AWZZ QCNWN1539AWZZ QCNWN1389AWZZ QFS-D402DAWNI QFS-D202DAWNI QFS-D402DAWNI QCNWN2471AWZZ QCNWN2495AWZZ VVKNA09SS29-1 QCNWN2467AWZZ J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AF AG AH AC AC AH AC AC AC AC AB AC AD AA AB AC AD AD AC AB AC AC AC AB AG AG AE AC AC AC AC AF AD AX AC QCNWN2473AWZZ QCNWN2470AWZZ QSOCJ0224AWZZ QJAKM0004AWZZ QSW-Z0015AWZZ QLUGP0001AWZZ 92LMTR2790CASY 92LMTR1854BASY RMOTV0373AFZZ J J J J J J J J J AC AC AC AK AF AC BB AP AL RMOTV0027AWZZ RRLYD0018AWZZ RRLYD0016AWZZ VHLGP1UM271-1 QTANA0423AWZZ QSW-M0012AWZZ QSW-M0012AWZZ QSW-M0012AWZZ QSW-F9001AW01 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T 92LSWICHT1663T QCNCW019FAWZZ QCNCW015DAWZZ QCNCW019EAWZZ J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AM AH AH AH AE AM AM AM AD AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AC AB AB AB DESCRIPTION Flat Wire,4Pin Flat Wire,5Pin Jack,Video/AUX Jack,Headphones Switch,Push Type [Jog Volume] Lug Motor with Chassis [Spindle] Motor with Gear [Sled] Motor with Worm Pulley [T/T Up Down Loading Motor] Motor,Air Cooling Fan Relay Relay Remote Sensor,GP1UM271 Terminal,Speaker Switch,Leaf Type [Open/Close] Switch,Leaf Type [Clamp] Switch,Leaf Type [Disc Number] Switch,Push Type [Pickup In] Switch,Key Type [Power] Switch,Key Type [Memory Set] Switch,Key Type [REC/Pause] Switch,Key Type [Tuning Down] Switch,Key Type [Tuning Up] Switch,Key Type [Timer/Sleep] Switch,Key Type [Clock] Switch,Key Type [CD] Switch,Key Type [Tuner] Switch,Key Type [Video/AUX] Switch,Key Type [Tape] Switch,Key Type [Stop] Switch,Key Type [Play] Switch,Key Type [Fast Forward] Switch,Key Type [Fast Rewind] Switch,Key Type [X-Bass/Demo] Switch,Key Type [Equalizer] Switch,Key Type [Open/Close] Switch,Key Type [Disc Skip] Holder,Flat Wire,6Pin Holder,Flat Wire,4Pin Holder,Flat Wire,5Pin CD MECHANISM PARTS OTHER CIRCUITRY PARTS BI4/CNS4 BI601/CNS601 BI701/CNS701 BI703/CNS703 BI704/CNS704 BI801/CNS801 CNP1 CNP2 CNP3 CNP3A CNP4 CNP5 CNP6 CNP101 CNP102 CNP301 CNP701A CNP701B CNP702 CNP703,704 CNP705 CNP801 CNP802 CNP971 CNS1A/B CNS2A/B CNS3A/B CNS971 1 F801,802 1 F803,804 1 F805 FFC701 FFC702 FL701 FW701 PRICE RANK PARTS CODE Connector Ass’y,6/6Pin Connector Ass’y,9/8Pin Connector Ass’y,11/10Pin Connector Ass’y,2/2Pin Connector Ass’y,2/2Pin Connector Ass’y,11/10Pin Plug,7Pin Plug,8Pin Plug,6Pin Plug,6Pin Plug,6Pin Plug,8Pin Plug,10Pin Plug,3Pin Plug,7Pin Plug,3Pin Socket,16Pin Socket,16Pin Socket,7Pin Plug,2Pin Socket,5Pin Plug,10Pin Plug,6Pin Plug,2Pin Connector Ass’y,7/7Pin Connector Ass’y,8/8Pin Connector Ass’y,6/6Pin Connector Ass’y,2Pin Fuse,4A,125V Fuse,2A,125V Fuse,4A,125V Flat Cable,16Pin Flat Cable,7Pin FL Display Flat Wire,6Pin 301 302 303 304 305 1 306 306- 1 NGERH0011AWZZ NGERH0012AWZZ MLEVP0080AWZZ NSFTM0020AWFW 92LM-CUSN1524A 92LHPC1LXASY ———— J J J J J J AC AC AC AD AC BD –– 306- 2 306- 3 701 702 703 704 M1 M2 SW4 NGERR0043AFZZ MSPRC0961AFZZ XBSSD26P06000 XHBSD20P05000 XBBSD20P03000 LX-WZ1070AFZZ 92LMTR2790CASY 92LMTR1854BASY QSW-F9001AW01 J J J J J J J J J AC AA AA AA AA AA BB AP AD Gear,Middle Gear,Drive Rail,Guide Shaft,Guide Cushion Pickup Unit Ass’y Pickup Unit (Not Replacement Item) Gear,Rack Spring,Rack Screw,ø2.6×6mm Screw,ø2×5mm Screw,ø2×3mm Washer,ø1.5×ø3.8×0.25mm Motor with Chassis [Spindle] Motor with Gear [Sled] Switch,Leaf Type [Pickup In] CABINET PARTS –4– 201 201 201- 1 92LCAB4896AASY J 92LCAB4957AASY J ———— 201- 2 GCOVA1487AWSA J 201- 2 GCOVA1467AWSB J 201- 3 GCOVA1487AWSA J 201- 3 GCOVA1468AWSB J 201- 4 201- 5 201- 6 201- 7 201- 7 GDORF0118AWSA GDORF0119AWSA HDECQ0963AWSA JKNBZ0921AWSA JKNBZ0921AWSB J J J J J BC Front Panel Ass’y [CD-E700] BC Front Panel Ass’y [CD-E77] –– Front Panel (Not Replacement Item) Cover,Cassette [Tape 1] [CD-E700] AH Cover,Cassette [Tape 1] [CD-E77] Cover,Cassette [Tape 2] [CD-E700] AH Cover,Cassette [Tape 2] [CD-E77] AE Holder,Cassette [Tape 1] AE Holder,Cassette [Tape 2] AG Panel,AMP. AF Button,Power/Tuning [CD-E700] AF Button,Power/Tuning [CD-E77] CD-E700/CD-E77 NO. PRICE RANK PART CODE 201- 8 201- 8 201- 9 201-10 201-11 201-12 201-13 201-14 201-15 201-16 201-17 201-18 202 202 202- 1 JKNBZ0922AWSA JKNBZ0922AWSB JKNBZ0923AWSA JKNBZ0924AWSA JKNBZ0925AWSA JKNBZ0926AWSA GCOVA1460AWSA GCOVA1351AWSA MSPRD0151AWFJ MSPRD0152AWFJ MLIFP0008AWZZ HBDGB1007AWSA 92LCAB3838BASY 92LCAB3839BASY ———— J J J J J J J J J J J J J J AE AE AG AK AL AE AC AB AB AB AD AD AN AN –– 202- 2 203 PCUSG0022AWZZ J 92LCAB3838CASY J AB AN 203 203- 1 92LCAB3839CASY J ———— AN –– 203- 2 204 205 205 206 206 207 207 207 PCUSG0022AWZZ GCAB-1197AWZZ GCAB-1215AWSA GCAB-1215AWSB GCOVA1486AWSA GCOVA1469AWSB GITAR1113AWSA GITAR1135AWSA GITAR1136AWSA J J J J J J J J J AB AM AT AR 207 208 208- 1 208- 2 208- 3 208- 4 208- 5 208- 6 208- 7 208- 8 208- 9 208-10 208-11 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 GITAR1137AWSA KMECB0032AWZZ 92LF513-894 92LF525-357 92LF567-719 92LF522-063 92LFF20D-12 92LF514-131 92LFF19S-31 92LFF20B-13 92LF522-061 92LFF19S-52 92LF513-895 LANGK0110AWFW LANGK0111AWFW LANGK0317AWFW LBSHC0005AWZZ LCHSM0174AWFW LCHSM0155AWZZ LHLDM1018AWZZ LHLDZ1455AWZZ LHLDZ1358AWZZ LHLDZ1433AWZZ LHLDZ1410AWZZ LHLDZ1412AWZZ MCAMP0010AWZZ MCAMP0011AWZZ MLEVP0109AWZZ MLEVP0110AWZZ MLEVP0111AWZZ MLEVP0112AWZZ MLOKC0003AWZZ MLOKC0004AWZZ MSPRC0033AWFJ MSPRD0109AWFJ MSPRD0110AWFJ MSPRP0057AWFW MSPRP0068AWFW NFANP0001AWZZ NGERH0152AWZZ NGERH0153AWZZ NGERW0020AWZZ NGERW0021AWZZ NGERW0022AWZZ NGERW0023AWZZ NTNT-0022AWZZ PCUSG0022AWZZ PMAGF0007AWZZ PRDAR0261AWFW J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AK AM AM AM AM BD –– AZ AL AE AE AF AD AN AS AE AF AF AD AD AC AE AE AB AB AB AB AD AD AB AB AB AC AB AD AC AC AC AC AD AC AK AB AD AT DESCRIPTION Button,Open/Close [CD-E700] Button,Open/Close [CD-E77] Button,Operation A Button,Operation B Button,Function Button,X-BASS/Equalizer Cover,Sensor Cover,Timer LED Cassette Spring,Tape 1 Cassette Spring,Tape 2 Damper Badge,SHARP Side Panel Ass’y,Left [CD-E700] Side Panel Ass’y,Left [CD-E77] Side Panel,Left (Not Replacement Item) Cushion,Leg Side Panel Ass’y,Right [CD-E700] Side Panel Ass’y,Right [CD-E77] Side Panel,Right (Not Replacement Item) Cushion,Leg Loading Tray Top Cabinet [CD-E700] Top Cabinet [CD-E77] Cover,CD Tray [CD-E700] Cover,CD Tray [CD-E77] Rear Panel [CD-E700 for U.S.A.] Rear Panel [CD-E77 for U.S.A] Rear Panel [CD-E700 for Canada] Rear Panel [CD-E77 for Canada] Tape Mechanism Ass’y Head Plate Block [Tape 2] Motor with Pulley [Tape] Tape Mechanism PWB Ass’y Clutc Ass’y Block [Tape 2] Belt,Main [Tape 2] Pinch Roller Belt,FF/REW [Tape 1] Belt,Main [Tape 1] Clutc Ass’y Block [Tape 1] Belt,FF/REW [Tape 2] Head Plate Block [Tape 1] Bracket,Cassette Lock,Tape 1 Bracket,Cassette Lock,Tape 2 Bracket,Fan Support Bushing,AC Power Supply Cord Chassis,Main Chassis,Loading Stabilizer Holder,CD Mechanism Stabilizer Holder Holder,Gear Holder,FL Display Holder,LED Gear,Can Upper Gear,Can Lower Lever,Cam Lock Lever,Switch A Lever,Switch B Turntable Actuator Lock Lever,Cassette,Tape 1 Lock Lever,Cassette,Tape 2 Spring,Friction Spring,Cassette Lock,Tape 1 Spring,Cassette Lock,Tape 2 Spring,Tray Lock Spring,Motor Gear Rotary Fan Gear,Turntable Drive Gear,Drive Gear,Center Gear,Idler Gear,Worm Motor Gear Turntable Cushion,Leg Magnet Heat Sink NO. 1 245 246 1 247 248 249 250 251 252 253 254 255 257 258 601 602 603 604 605 606 607 608 609 610 611 612 614 615 616 617 618 619 PRICE RANK PARTS CODE QACCD0022AWZZ QCNWN1860AWZZ QFSHD0001AWZZ 92LCSPR1431C 92LMT0304302 92LNBAND1318A 92LPT0303002 LANGK0359AWFW HDECQ0964AWSA LHLDZ1451AWZZ JKNBK0095AWSA PSHEP0119AWZZ MLEVF0117AWFW XJBSD30P10000 XEBSD30P12000 LX-EZ0010AWFD LX-JZ0044AWFF LX-HZ0009AWFD XHBSD26P04000 92LSC0314WBZI XJBSD20P05000 XHBSD40P08000 XBBSD20P04000 LX-JZ0010AFFD XJSSD30P10000 XHBSD30P06000 LX-JZ0036AWFD LX-JZ0037AWFD LX-JZ0003AWFF XESSD30P10000 92LSC0310RBZI J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J DESCRIPTION AM AC AB AA AB AA AB AD AF AC AK AD AC AA AA AA AC Power Supply Cord Lug Wire Holder,Fuse Spring,Ring Plate,Metal Nylon Band,80mm Roller Bracket,Heat Sink Panel,Edge Light Holder,Edge Light Knob,Volume Sheet,Edge Light Plate,Support Screw,ø3×10mm Screw,ø3×12mm Screw,Special Screw,ø3×10mm AC Screw,ø3×14mm AA Screw,ø2.6×4mm AB Screw,Special AA Screw,ø2×5mm AA Screw,ø4×8mm AA Screw,ø2×4mm AA Screw,ø3×10mm AA Screw,ø3×10mm AA Screw,ø3×6mm AB Screw,Special AB Screw,ø3×18mm AA Screw,ø3×12mm AA Screw,ø3×10mm Screw,Special PACKING PARTS (Except for U.S.A.) SPAKA0431AWZZ J SPAKC1555AWZZ J J J Packing Add. AU Packing Case [CD-E700 For Canada] AU Packing Case [CD-E77 For Canada] AF Polyethylene Bag,Unit AB Polyethylene Bag, Accessories QANTL0007AWZZ TINSE0490AWZZ J J AK AE TINSK0143AWZZ TINSZ0874AWZZ TLABRF250AWZZ J J J TLABRF251AWZZ J TLABZ0593AWZZ TLABZ1318AWZZ TLABZ1322AWZZ RRMCG0361AWSA GFTAT1017AWSA J J J J J SPAKC1556AWZZ J SPAKP0032AWZZ 92LBAG1460C1 ACCESSORIES AM/FM Loop Antenna Operation Manual [Except for Canada] AF Operation Manual [For Canada] AD Quick Guide [For U.S.A. Only] AB Label,Bar Code [For Canada Only] [CD-E700] AB Label,Bar Code [For Canada Only] [CD-E77] AB Energy Star Label (Set) AC Label,Feature [Tape 1] AC Label,Feature [Tape 2] AS Remote Control AK Battery Lid,Remote Control P.W.B. ASSEMBLY (Not Replacement Item) PWB-A1~5 1 PWB-B1,2 PWB-C PWB-D PWB-E PWB-F 92LPWB4896MANS J J J J J Main/Display/Headphones/LED A/LED B (Combined Ass’y) –– Power/Transformer (Combined Ass’y) –– CD Servo AD CD Motor (PWB Only) AD CD Loading Motor (PWB Only) –– Tape Mechanism J AZ 92LPWB4896PWRS J 92LPWB4896CDUS QPWBF0027AWZZ QPWBF0749AWZZ 92LF567-719 –– OTHER SERVICE PART UDSKA0004AFZZ –5– CD Pickup Lens Cleaner CD-E700/CD-E77 NO. PRICE RANK PART CODE DESCRIPTION CP-E700/CP-E77 SPEAKER BOX PARTS 901 GBOXS2026AWSA J 901 GBOXS2026AWSC J 901 GBOXS4026AWSA J 901 902 GBOXS4026AWSC J CPNLS1076AW01 J AX 902 CPNLS1076AW02 J AX 902 902 903 903 903 903 904 905 906 907 908 909 909 910 911 CPNLS1077AW01 CPNLS1077AW02 HPNLS1078AWSA HPNLS1078AWSB HPNLS1079AWSA HPNLS1079AWSB RSPXZ0001AWZX XJBSD40P16000 XJBSD30P12000 XMPSF40P40000 XMBSF40P16000 TSPC-1164AWZZ TSPC-1188AWZZ PFLT-0046AWZZ QCNWN2483AWZZ J J J J J J J J J J J J J J J AX AX AW AW AW AW AX AB AA AC AC AC AC AC AQ 912 SP1,2 SP3,4 SP5,6 SP7,8 PCUSG0141AWZZ RSPA10092AW6W RSPA00078AW6T LHLDZ1457AWM1 LHLDZ1457AWM1 J J J J J BD AS AT AT Speaker Box Ass’y,Right [CP-E700] Speaker Box Ass’y,Right [CP-E77] Speaker Box Ass’y,Left [CP-E700] Speaker Box Ass’y,Left [CP-E77] Front Panel Ass’y,Right [CP-E700] Front Panel Ass’y,Right [CP-E77] Front Panel Ass’y,Left [CP-E700] Front Panel Ass’y,Left [CP-E77] Side Panel,Right [CP-E700] Side Panel,Right [CP-E77] Side Panel,Left [CP-E700] Side Panel,Left [CP-E77] Passive Radiator Screw,ø4×16mm Screw,ø3×12mm Screw,ø4×40mm Screw,ø4×16mm Label,Specifications [CP-E700] Label,Specifications [CP-E77] Felt Speaker Cord Ass’y (with Capacitor C1,2) Cushion,Foot Woofer Tweeter Super Tweeter Ass’y Super Tweeter Ass’y PACKING PARTS (Except for U.S.A.) SPAKA0416AWZZ J SPAKZ1033AWZZ J SSAKH0053AWZZ J AM Packing Add. Sheet,Protection AC Polyethylene Bag,Speaker –6– CD-E700/CD-E77 701 306 A 304 306-2 701 306-1 B 704 306-3 302 C 301 702 303 D 703x2 E M1 F 305 M2 305x2 G SW4 PWB-D H 1 2 3 4 Figure 7 CD MECHANISM EXPLODED VIEW –7– 5 6 CD-E700/CD-E77 202-1 202 A BELT CONNECTION FF/REW Tape FF/REW ROLLER Motor ROLLER ASS'Y ASS'Y 601x2 611 PWB-A1 244 604x2 611 FLYWHEEL FLYWHEEL ASS'Y MAIN BELT ASS'Y TAPE2 TAPE1 614x3 611 IC851 IC852 IC853 615x3 Silicon Grease 601x2 246 B 207 202-2 604x10 PWB-F 208-3 208-7 208-2 PWB-B1 601 252 IC901 Silicon Grease 616x2 618x5 208 227 605 230 606x2 601x10 614x3 246 208-9 220 208-8 208-4 C 209 FL701 208-5 208-11 219 M901 248 208-1 PWB-B3 208-10 606x2 257 231 234 605 208-6 254 D PWB-B4 201 210 201-7 253 PWB-B2 211 610x2 228 609x4 201-11 245 212 201-14 201-10 201-13 201-9 201-1 603 E PT801 201-12 201-17 247x2 247x8 201-8 201-18 PWB-A3 F PWB-A2 201-6 255 201-17 248 213 612x1 201-15 201-4 G 242x2 201-2 201-5 201-3 203-1 203-2 250 201-16 H 203 601x2 Note: Only the unit and consumable parts are supplied as parts supply for the Tape mechanism. 1 2 3 4 Figure 8 CABINET EXPLODED VIEW (1/2) –8– 5 6 CD-E700/CD-E77 602x2 205 217 A 249 243 215 618 B 241 CD MECHANISM 258 602x2 216 C SW3 PWB-E D 235 251 SW2 SW1 225 226 M3 224 251 M3 240 204 E 232 251 214 PWB-C F 251 223 619 251 238 221 239 G 233 608 229 222 236 237 236 218 607 H 206 607 1 2 3 4 Figure 9 CABINET EXPLODED VIEW (2/2) –9– 5 6 CP-E700/CP-E77 SP5, 6 SUPER TWEETER A BK SP7, 8 SUPER TWEETER BK RD SP5, 6 SUPER TWEETER SP3, 4 TWEETER RD C1, C2 Capacitor 2.2µF, 100V (N.P.) BK SP7, 8 SUPER TWEETER B RD C1, C2 Capacitor 2.2µF, 100V (N.P.) SP3, 4 TWEETER BK SP5,6 SP1, 2 WOOFER BK 901 906X2 RD C 909 SP3,4 SP1, 2 WOOFER 906X2 910 910 D 904 SP7, 8 906X2 910 910 SP1, 2 E 910 910 912X4 903 908X4 F 905x4 902 G 911 907x4 H 1 2 3 4 Figure 10 SPEAKER EXPLODED VIEW – 10 – 5 6 PACKING OF THE SET (FOR U.S.A. ONLY) Setting position of switches and knobs Tape Mechanism STOP SPEAKER CP-E700/CP-E77 UNIT CD-E700/CD-E77 SPAKP0032AWZZ Polyethylene Bag,Unit T SSAKH0053AWZZ Polyethylene Bag, Speaker P O T SPAKA0431AWZZ Packing Add. P O E SID RE AR E SID FRONT T O P SPAKA0416AWZZ Packing Add. FR ON SPAKZ1033AWZZ Protection Sheet T BO O TT M B O T T O M Energy Star Label A Featurel Label [Tape1] Featurel Label [Tape2] B 92LBAG1460C1 Polyethylene Bag, Accessories AM/FM Loop Antenna Operation Manual Quick Guide Remote Control A B SPAKC1547AWZZ [CD-E700] SPAKC1554AWZZ [CD-E77] Packing Case RE AR RE AR Not Replacement Item COPYRIGHT © 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. SHARP CORPORATION AV Systems Group Audio Systems Division Higashihiroshima, Hiroshima 739-0192, Japan Printed in Japan A0212-1459DS•HA•M SC • SL