Download Acer H225HQL User guide

Acer LCD Monitor
User Guide
Copyright © 2008. Acer Incorporated.
All Rights Reserved.
Acer LCD Monitor User Guide
Original Issue: 06 /2008
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer LCD Monitor User Guide
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
iii
Information for your safety and
comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Special notes on LCD monitors
The following are normal with the LCD monitor and do not indicate a problem.
•
Due to the nature of the fluorescent light, the screen may flicker during
initial use. Turn off the power switch and then turn it on again to make
sure the flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
The LCD screen has 99.99% or more effective pixels. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all the time.
•
Due to the nature of the LCD screen, an afterimage of the previous screen
may remain after switching the image, when the same image is displayed
for hours. In this case, the screen is recovered slowly by changing the image
or turning off the power switch for a few hours.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor:
•
Always unplug the monitor before cleaning.
•
Use a soft cloth to wipe the screen and cabinet front and sides.
iv
Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power from the equipment, be sure to unplug the power cord from
the electrical outlet.
Safe listening
To protect your hearing, follow these instructions.
•
Gradually increase the volume until you can hear it clearly and comfortably
and without distortion.
•
After setting the volume level, do not increase it after your ears have
adjusted.
•
Limit the amount of time listening to music at high volume.
•
Avoid turning up the volume to block out noisy surroundings.
•
Turn the volume down if you can't hear people speaking near you.
Warnings
•
•
•
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage internal
devices.
Using electrical power
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
v
•
•
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's power cord is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the power cord plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grounded may result in electric shock
and/or injury.
Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6
meters (15 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
the power cord or plug is damaged, cut or frayed
•
•
•
•
•
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
vi
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may
result in damage and will often require extensive work by a
qualified technician to restore the product to normal condition.
Potentially explosive environments
Switch off your device in any area with a potentially explosive atmosphere and
obey all signs and instructions. Potentially explosive atmospheres include areas
where you would normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily injury or even
death. Switch off the device near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel depots, storage and
distribution areas; chemical plants; or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not always,
marked. They include below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as propane or butane),
and areas where the air contains chemicals or particles such as grain, dust or
metal powders.
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
IT Equipment Recycling Information
Acer is strongly committed to environmental protection and views recycling, in
the form of salvaging and disposal of used equipment, as one of the company's
top priorities in minimizing the burden placed on the environment.
We at Acer are very conscious of the environmental effects of our business and
strive to identify and provide the best working procedures to reduce the
environmental impact of our products.
For more information and help when recycling, please go to this website:
http://www.acer-group.com/public/Sustainability/sustainability01.htm
http://www.acer-group.com/public/Sustainability/sustainability04.htm
Visit www.global.acer.com for further information on the features and benefits
of our other products.
Disposal instructions
Do not throw this electronic device into the trash when discarding.
To minimize pollution and ensure utmost protection of the global
environment, please recycle. For more information on the Waste
from Electrical and Electronics Equipment (WEEE) regulations, visit
http://global.acer.com/about/sustainability.htm
vii
LCD pixel statement
The LCD unit is produced with high-precision manufacturing techniques.
Nevertheless, some pixels may occasionally misfire or appear as black or
red dots. This has no effect on the recorded image and does not constitute
a malfunction.
This product has been shipped enabled for power management:
•
•
•
Activate display’s Sleep mode within 15 minutes of user inactivity.
Activate computer’s Sleep mode within 30 minutes of user inactivity.
Wake the computer from Sleep mode by pushing the power button.
Tips and information for comfortable use
Computer users may complain of eyestrain and headaches after prolonged use.
Users are also at risk of physical injury after long hours of working in front of a
computer. Long work periods, bad posture, poor work habits, stress,
inadequate working conditions, personal health and other factors greatly
increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis,
tenosynovitis or other musculoskeletal disorders. The following symptoms may
appear in the hands, wrists, arms, shoulders, neck or back:
•
•
•
•
•
numbness, or a burning or tingling sensation
aching, soreness or tenderness
pain, swelling or throbbing
stiffness or tightness
coldness or weakness
If you have these symptoms, or any other recurring or persistent discomfort
and/or pain related to computer use, consult a physician immediately and
inform your company's health and safety department.
The following section provides tips for more comfortable computer use.
Finding your comfort zone
Find your comfort zone by adjusting the viewing angle of the monitor, using a
footrest, or raising your sitting height to achieve maximum comfort. Observe
the following tips:
•
•
•
refrain from staying too long in one fixed posture
avoid slouching forward and/or leaning backward
stand up and walk around regularly to remove the strain on your leg
muscles
viii
Taking care of your vision
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive
room lighting, poorly focused screens, very small typefaces and low-contrast
displays could stress your eyes. The following sections provide suggestions on
how to reduce eyestrain.
Eyes
•
•
•
Rest your eyes frequently.
Give your eyes regular breaks by looking away from the monitor and
focusing on a distant point.
Blink frequently to keep your eyes from drying out.
Display
•
Keep your display clean.
•
•
•
Keep your head at a higher level than the top edge of the display so your
eyes point downward when looking at the middle of the display.
Adjust the display brightness and/or contrast to a comfortable level for
enhanced text readability and graphics clarity.
Eliminate glare and reflections by:
•
placing your display in such a way that the side faces the window or
any light source
•
•
•
minimizing room light by using drapes, shades or blinds
using a task light
changing the display's viewing angle
•
•
•
•
using a glare-reduction filter
using a display visor, such as a piece of cardboard extended from the
display's top front edge
Avoid adjusting your display to an awkward viewing angle.
Avoid looking at bright light sources, such as open windows, for extended
periods of time.
Developing good work habits
Develop the following work habits to make your computer use more relaxing
and productive:
•
Take short breaks regularly and often.
•
•
•
Perform some stretching exercises.
Breathe fresh air as often as possible.
Exercise regularly and maintain a healthy body.
Acer Incorporated
x
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Tel : 886-2-2696-1234
Fax : 886-2-2696-3535
We,
Declaration of Conformity
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai, E-mail: [email protected]
And,
Acer Europe SA
Via Cantonale, Centro Galleria 2 6928 Manno Switzerland
Hereby declare that:
Product:
Trade Name:
Model Number:
SKU Number:
LCD Monitor
Acer
H225HQL
H225HQLxxxxx (“x” = 0~9, a ~ z, or A ~ Z)
Is compliant with the essential requirements and other relevant provisions of the following EC directives,
and that all the necessary steps have been taken and are in force to assure that production units of the
same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized
standards:
-. EN55022, AS/NZS CISPR22 Class B.
-. EN55024
-. EN61000-3-2, Class D
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following
harmonized standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances
in Electrical and Electronic Equipment:
-. The maximum concentration values of the restricted substances by weight in homogenous material are:
Lead
0.1% Polybrominated Biphenyls (PBB’s)
0.1%
Mercury
0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1%
Hexavalent Chromium 0.1% Cadmium
0.01%
Directive 2005/32/EC of the European Parliament and of the Council with regard to Ecodesign Requirements.
Year to begin affixing CE marking 2010.
_______________________________
Easy Lai /Manager
Regulation, Acer Inc.
Jan. 7, 2010
Date
x
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.
The following local manufacturer/importer is responsible for this declaration:
Product name:
LCD Monitor
Model number:
H225HQL ("x" = 0 - 9, a - z, or A - Z or blank)
SKU number:
H225HQLxxx
("x" = 0 - 9, a - z, or A - Z or blank)
Name of responsible party:
Acer America Corporation
Address of responsible party:
333 West San Carlos St.
San Jose, CA 95110
USA
Contact person:
Acer Representative
Tel:
1-254-298-4000
Fax:
1-254-298-4147
Safety instructions
Special notes on LCD monitors
Cleaning your monitor
Connecting/disconnecting the device
Accessibility
Safe listening
Warnings
Using electrical power
Product servicing
Additional safety information
IT Equipment Recycling Information
Disposal instructions
LCD pixel statement
Tips and information for comfortable use
Declaration of Conformity
Federal Communications Commission
Declaration of Conformity
Unpacking
Attaching the base (for selected models)
Attaching the base (for selected models)
Screen position adjustment
Connecting the power cord
Power saving
Connecting the docking device
(for selected models)
Display Data Channel (DDC)
Connector pin assignment
15-pin color display signal cable
24-pin color display signal cable
19-pin color display signal cable*
Standard timing table
Installation
Users controls
Front panel controls
Acer eColor Management
Operation instructions
Features and benefits
Adjusting the OSD settings
Adjusting the picture quality
Adjusting the OSD position
Adjusting the setting
Product information
iii
iii
iii
iii
iii
iv
iv
iv
iv
v
vi
vi
vi
vii
vii
ix
x
1
2
3
4
4
4
5
5
5
5
6
6
7
8
9
9
10
10
10
10
10
11
12
13
Contents
Information for your safety and comfort
Troubleshooting
VGA mode
DVI/HDMI* mode
14
14
15
1
Please check that the following items are present when you unpack the box,
and save the packing materials in case you need to ship or transport the
monitor in the future.
LCD monitor
User guide
Quick start guide
D-sub cable
DVI cable
AC power cord
Audio Cable
English
Unpacking
English
2
Attaching the base (for selected models)
Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
1
Attach the the monitor stand arm to the base.
2
Ensure that the base is locked onto the monitor stand arm.
Note: Take care when performing the installation to avoid
injuring yourself.
3
English
Screen position adjustment
To optimize the viewing position, you can adjust
the monitor tilt, using both of your hands to hold
the edges of the monitor. The monitor can be
adjusted to 15 degrees up or 5 degrees down.
Connecting the power cord
•
Check first to make sure that the power cord
you use is the correct type required for your
area.
•
The monitor has a universal power supply
that allows operation in either 100/120 V AC
or 220/240 V AC voltage area. No useradjustment is required.
•
Plug one end of the power cord to the AC
inlet, and plug the other end into an AC outlet.
•
For units using 120 V AC:
Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.
•
For units using 220/240 V AC:
Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The
cord set should have the appropriate safety approvals for the country in
which the equipment will be installed.
Power saving
The monitor will be switched to "power saving" mode by the control signal
from the display controller, as indicated by the amber-colored power LED.
Mode
On
Power saving
LED light
Blue
Amber
The power saving mode will be kept until a control signal has been detected or
the keyboard or mouse is activated. The recovery time from "power saving"
mode back to "on" is around 3 seconds.
English
4
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol,
the monitor is able to plug-and-play. The DDC is a communication protocol
through which the monitor automatically informs the host system about its
capabilities; for example, supported resolutions and corresponding timing. The
monitor supports the DDC2B standard.
Connector pin assignment
1
6
11
15-pin color display signal cable
PIN No. Description
PIN No. Description
1
Red
9
+5 V
2
Green
10
Logic ground
3
Blue
11
Monitor ground
4
Monitor ground
12
DDC-serial data
5
DDC-return
13
H-sync
6
R-ground
14
V-sync
7
G-ground
15
DDC-serial clock
8
B-ground
5
10
15
5
PIN No.
1
Description
PIN No.
English
24-pin color display signal cable
Description
TMDS data 2-
13
NC
2
TMDS data 2+
14
+5 V power
3
TMDS data 2/4 shield
15
GND (return for +5 V hsync.vsync)
4
NC
16
Hot-plug detection
5
NC
17
TMDS data 0-
6
DDC clock
18
TMDS data 0+
7
DDC data
19
TMDS data 0/5 shield
8
NC
20
NC
9
TMDS data 1-
21
NC
10
TMDS data 1+
22
TMDS clock shield
11
TMDS data 1/3 shield
23
TMDS clock+
12
NC
24
DDC TMDS clock-
19-pin color display signal cable*
19171513 11 9 7 5 3 1
1816 14 1210 8 6 4 2
PIN No.
Description
PIN No.
Description
1
TMDS Data2+
2
TMDS Data2 Shield
3
TMDS Data2–
4
TMDS Data1+
5
TMDS Data1 Shield
6
TMDS Data1–
7
TMDS Data0+
8
TMDS Data0 Shield
9
TMDS Data0–
10
TMDS Clock+
11
TMDS Clock Shield
12
TMDS Clock–
13
CEC
14
Reserved (N.C. on device)
15
SCL
16
SDA
17
DDC/CEC Ground
18
+5V Power
19
Hot Plug Detect
* only for certain models
7
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
a
Make sure both the monitor and computer are switched off.
b
Connect the VGA video cable to the computer.
c
Connect the digital cable .
(1)
Make sure both the monitor and computer are switched off.
(2)
Connect one end of the 24-pin DVI* cable to the back of the
monitor and the other end to the computer's port.
(3)
Connect one end of the 19-pin HDMI* cable to the back of the
monitor and the other end to the computer's port.
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
4
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem
* for selected models
English
Installation
English
8
Users controls
Front panel controls
Icon
,QSXW
Item
Description
OSD
functions
Press to view the OSD. Press again to enter a
selection in the OSD.
Input Key
Use ,QSXW key to select between three different video
source that may be connected to your monitor.
(a) VGA input (b) DVI-D input (c) HDMI input
As you cycle through the inputs you will see the
following messages on right top side of screen to
indicate currently selected input source. It may take
1 or 2 seconds for the image to appear .
VGA or DVI-D or HDMI
If either VGA or DVI-D input is selec ted and both
VGA and DVI-D cables are not connected, a floating
dialog box as shown below appears:
"No Cable Connect" or "No S ignal"
$XWR
Auto adjust
button/Exit
If the OSD is active, press Auto to exit the OSD.
Once the OSD is inactive, press Auto and the
monitor will automatically optimize the display
position, focus, and clock of your display.
Press to adjust volume.
Empowering
Key
Press the Empowering Key to open the Acer eColor
Management OSD and access the scenario modes.
Please refer to "Acer eColor Management" on page
10 for more details.
Power
button/
indicator
Turns the monitor on/off. Blue indicates power on.
Amber indicates standby/power saving mode.
9
Operation instructions
1
Press the
Empowering Key to open the Acer eColor Management OSD
and access the scenario modes.
2
Press "
3
Press the Auto-adjust button to confirm the mode and exit Acer eColor
Management.
" or "
" to select the mode.
Features and benefits
Main
menu
icon
Sub menu item
Description
Standard mode
Default settings. Reflects native display capability.
Text mode
Optimal balance of brightness and contrast to
prevent eyestrain. The most comfortable way to
read onscreen text.
Pictrue mode
Enhances colors and emphasizes fine detail. Pictures
and photographs appear in vibrant colors with
sharp detail.
Movie mode
Displays scenes in clearest detail. Presents great
visuals, even in unsuitably-lit environments.
User mode
User-defined. Settings can be fine-tuned to suit any
situation.
English
Acer eColor Management
English
10
Adjusting the OSD settings
Note: The following content is for general reference only. Actual
product specifications may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the Menu key to open the OSD. You can use the OSD to adjust the picture
quality, OSD position and general settings. For advanced settings, please refer
to following page:
Adjusting the picture quality
1
Press the Menu key to bring up the OSD.
2
Using the / keys, select
Picture from the OSD. Then navigate to the
picture element you wish to adjust.
3
Use the
4
The Picture menu can be used to adjust the current Brightness, Contrast,
Colour Temp, Auto Config and other image-related qualities.
/
keys to adjust the sliding scales.
11
English
Adjusting the setting
1
Press the Menu key to bring up the OSD.
2
Using the / keys, select
feature you wish to adjust.
3
The Setting menu can be used to adjust the screen Menu Language and
other important settings.
Setting from the OSD. Then navigate to the
English
12
Product information
1
Press the Menu key to bring up the OSD.
2
Using the / keys, select
Information from the OSD. Then the basic
information of LCD monitor will show up for current input.
13
Before sending your LCD monitor for servicing, please check the
troubleshooting list below to see if you can self-diagnose the problem.
VGA mode
Problem
No picture visible
LED status
Remedy
Blue
Using the OSD, adjust brightness and
contrast to maximum or reset to their
default settings.
Off
Check the power switch.
Check if the power cord is properly
connected to the monitor.
Amber
Check if the video signal cable is
properly connected at the back of
monitor.
Check if the computer system is
switched on and in power saving/
standby mode.
Unstable picture
Abnormal picture
Check if the specification of graphics
adapter and monitor is in compliance
which may be causing the input signal
frequency mismatch.
Image is missing,
off-center, too
large or too
small on the
screen.
Using the OSD, adjust focus, clock, Hposition and V-position with nonstandard signals.
Check the display setting on your
system. In case of a missing image,
please select another resolution or
vertical refresh rate.
Wait for a few seconds after adjusting
the size of the image before changing
or disconnecting the signal cable or
switching off the monitor.
English
Troubleshooting
English
14
DVI/HDMI* mode
Problem
No picture visible
LED status
Remedy
Blue
Using the OSD, adjust brightness and
contrast to maximum or reset to their
default settings.
Off
Check the power switch.
Check if the AC power cord is properly
connected to the monitor.
Amber
Check if the video signal cable is
properly connected at the back of
monitor.
Check that the computer system is
switched on and in power saving/
standby mode.
* for selected models