1
Download Dynamic DX-ARC-SWB Specifications
Transcript
SOLUTIONS PRODUCT CATALOGUE FOR POWERCHAIRS AND SCOOTERS Image here Contents Introduction ....................................................................... 02 Product Family Selection Guide .............................. DX2 Wheelchair Control Solution DX Wheelchair Control System 03 ............................ 05 ................................ 13 Shark Wheelchair Control System ........................... 41 A-Series Integral Wheelchair Controller ................ 47 R-Series Scooter Controller .......................................... 49 Rhino Scooter Controller .............................................. 51 Programming Motors ................................................................... 53 ................................................................................... 57 Accessories Index ....................................................................... 59 ..................................................................................... 62 1 INTRODUCTION Dynamic Controls is committed to enhancing people’s lives. Our philosophy is built on combining an intimate understanding of the needs of mobility product users with our R&D design skills. This has enabled us to be the world’s premier supplier of electronic control systems for power wheelchairs and scooters for over 30 years. Our products range from cost effective integral controllers to a world leading modular control system that can be customised to suit a wide range of user needs. In addition we have a range of scooter controllers suitable for small, lightweight mini shoppers to rugged outdoor scooters. All our products are renowned for reliability. Dynamic Controls is unique in that we specialize in the medical mobility market. This means we are able to offer our customers an unrivalled level of experience and support. Dynamic Controls is a global organization with corporate headquarters in New Zealand and regional offices in the United Kingdom, North America and Asia. To find out more please visit www.dynamiccontrols.com Dynamic Controls maintains a rigorous quality management system and is independently audited to the exacting requirements of ISO13485. 2 PRODUCT FAMILY SELECTION GUIDE Wheelchair Controllers High Performance system designed for higher power rehab chairs. Based on a modular design with the flexibility to integrate a wide range of input and control devices. DX2 / DX Reliable solution for most standard power chair applications. Suitable for mid range power requirements with options to support actuators, lighting and attendant control. SHARK Cost effective integrated controller suitable for any lower power drive application. Ideal for lightweight or folding chairs. A-SERIES Scooter Controllers Range of high quality, reliable scooter controllers ideal for higher power applications. RHINO Cost effective scooter controllers available in 50A and 90A variants. R-SERIES 3 DYNAMIC CONTROLS DX/DX2 COMPONENTS Master Remotes DX2-REM550/551 Advanced Joystick Remotes DX-REMG90 Joystick Remote Secondary Remotes DX-REMG91/G91S Display Remotes DX-RJM Remote Joystick DX-REM34B Joystick Remote DX-RJM-HD Heavy Duty Joystick DX-ACU1 Attendant Dual Control Power Modules Actuator Modules DX2-PMA70/70L/90/90L DX2 Power Modules 70 or 90A (120A boost) With or without lighting DX2-ACT2/ACT4 DX2 Actuator Modules 2 or 4 channel DX-PMB / PMB2 Power Module 60 or 80A DX-PMB2-S Single channel Power Module 160A 4 DX-SLM Servo Lighting Module DX-CLAMB Combined Lighting Actuator Module DX-REM41D Tray Remote DX-RJM-MINI Mini Joystick DX-REM32B Chin Control Remote DX-RJM-VIC-CCD Finger Joystick DX-REM35B Tray Remote DX-ACC4B Switch Input DX-ACU3B Attendant Master Remote DX-SNP Sip & Puff Input Environmental Control DX-ARC5 Actuator Remote Control DX-ECU Environmental Control Unit DX-IRIS2 IR Transmitter DX-ARC-SWB Actuator Remote Control DX-LM-Z Lighting Module DX-MTX IR Mouse Transmitter DX-PCMR IR Mouse Receiver 5 DX2 TM WHEELCHAIR CONTROL SOLUTION THE DX2 SYSTEM DX2 is a modular power chair control solution that expands the proven DX system through the addition of powerful new components. These allow the design of a rehab power chair that will meet the requirements of any user ranging from drive only control to full environmental control. The DX2 system is designed to maximise comfort and user control, is easy to set up and maintain and is highly reliable. Key Features • Large full-colour LCD display with intuitive graphical user interface • Smooth fine control of seating • Compact powerful power modules with optional built-in lighting • Reduced set up time through system programming backup • Backward compatible with DX system DX2 Power Module P DX2 Master Remote Battery Charger (Optional) DX2 Actuator Module Hand Held Programmer Optional DX BUS P Optional DX BUS DX BUS Wizard PC-based Programmer (Optional) DX Secondary Remote Master Remotes Power Modules/Lighting Secondary Remotes DX2-REM550 DX2-PMA70 DX-ACU1 DX2-REM551 DX2-PMA70L DX-RJM DX2-PMA90 DX-RJM-HD DX2-PMA90L DX-RJM-MINI Actuator Modules DX-RJM-VIC-CCD DX2-ACT2 TM DX2-ACT4 DX-ACC4B DX-SNP DX-ARC5 DX-ARCSWB Other Product Tree DX-ACC3 DX-SKT-X4 8 Environmental Control DX-IRIS2 Programming DX-ECU WIZARD DX-MTX DX-HHP DX-PCMR DX/DX2 SYSTEM CONFIGURATIONS A key feature of the DX2 system is backwards compatibility with the DX system. This means that DX2 and DX modules may be used within the same system. Master Remote Power Module Any DX/DX2 Module or or or DX DX2 DX DX2 DX DX2 The modules required for some typical applications are listed below. Application User Control Configuration Drive Only Drive + Lights, Actuators Joystick - Armrest mounted DX2-REM550 DX2-REM550 DX-REMG90A DX-REMG90A DX-REM34B DX-REM34B DX-REMG91 & DX-RJM DX-REMG91 & DX-RJM DX-REM41D DX-REM41D Joystick - Mid or tray-mounted DX-REM35B Joystick for heavy duty use DX-REMG91 & DX-RJM-HD DX-REMG91 & DX-RJM-HD Chin Joystick DX-REMG91 & DX-RJM DX-REMG91 & DX-RJM DX-REM32B Tray Switches DX-REMG91 & DX-ACC4B DX-REMG91 & DX-ACC4B Head Switches DX-REMG91 & DX-ACC4B DX-REMG91 & DX-ACC4B Single Switch Control DX-REMG91S DX-REMG91S Sip N Puff Breath Control DX-REMG91 & DX-SNP DX-REMG91 & DX-SNP Thumb, Tongue or Chin Control DX-REMG91 & DX-RJM-MINI DX-REMG91 & DX-RJM-MINI Finger Control (no force) DX-REMG91 & DX-RJM-VIC-CCD DX-REMG91 & DX-RJM-VIC-CCD Attendant control only DX-ACU3B DX-ACU3B (actuators only) DX-REMG90A DX-REMG90A DX2-REM550/551 DX2-REM550/551 IR Environmental Control or PC Mouse Control 9 DX/DX2 MASTER REMOTE SELECTION GUIDE Check the following table for a quick reference to the options on each Master Remote. Power Module Motor Motor Battery 10 Maximum no. drive modes Lock Seat controls Lighting controls Environmental controls Computer mouse control Col LCD 7 P 5 P P P P P DX2-REM551 P Col LCD 5 P 5 P P P P P DX-REMG90 P LED 7seg 6 P 5 P P P P DX-REMG90A P LED 7seg 6 P 5 P P P P DX-REMG90T P LED 7seg 6 P 5 P P Lighting Menu P DX-REMG91 LED 7seg 4 P P 5 P P P DX-REMG91S LED 7seg 4 P P 5 P P P Maximum speed knob Battery gauge P Internal switch interface Display DX2-REM550 No. buttons Joystick Master Remote DX-REM34B P LED 7seg 12 P 5 P P P DX-REM41D P LED 7seg 12 P 5 P P P DX-REM32B P 1 1 P Via DX-ARC DX-REM35B P 1 1 P Via DX-ARC DX-ACU3B P LED 7seg 3 P 5 P DX2 MASTER REMOTES DX2-REM550/551 Advanced Joystick Remote The DX2 Master Remotes are stylish high-end joystick remotes with a large, clear, full colour LCD screen. They provide easy control and a high level of functionality to a wide variety of users. Key Features • Large, clear colour LCD screen with icon-based screen controls • Light sensor to select indoor and outdoor display mode • Low-force joystick with proportional or fourquadrant control • Direct access to computer mouse and environmental control modules • Display adapts for right or left-hand mounting • Battery gauge, real time clock and key pad controlled lock • Programmable function keys to give direct access to chair functions • Three jack sockets for multi-purpose external button control Part numbers Master Remote DX2-REM550 DX2-REM550 Master Remote with colour LCD and 7 buttons DX2-REM551 Master Remote with colour LCD and 5 buttons also required – DX BUS cable External Buttons (if required for external jack sockets) Please refer to DX Switches section for details of external buttons Technical Specifications Material Plastic Size 211 x 88 x 153 mm Protection Rating IPX4 Weight 1100 grams Operating Temp -25°C to 50°C DX Connectors 2 DX BUS Connectors Storage Temp -40°C to 70°C 11 DX2 POWER MODULES DX2-PMA70/70L/90/90L The DX2 power modules are the workhorses of the DX2 system and provide fast, precise control of high power drive motors. They are a robust solution for mid, rear and front wheel drive configurations. • 70A or 90A with optional built in lighting • Programmable current boost • Built in 3 channel lighting for indicators, hazard lights, driving lights • Programmable Drive Control Input (DCI) • System programming backup • Service scheduler indicator • Comprehensive fault protection DX2-PMA70L Part numbers Power Modules DX2-PMA70 70A power module DX2-PMA70L 70A power module with lighting DX2-PMA90 90A power module DX2-PMA90L 90A power module with lighting Connector Kits DX2LOOM-PM1 DX2 Battery & Motor Connector Kit for DX2-PMA70, DX2-PMA90 or DX2LOOM-PM2 DX2 Battery & Motor Connector Kit for DX2-PMA70L, DX2-PMA90L Motor Connectors GCN60326 DX/DX2 Motor Housing – left motor only GCN60327 DX/DX2 Motor Housing – right motor only or GCN60325 DX/DX2 Motor Housing – left or right motor (unkeyed) GCN60323 Connector Key to configure GCN60320 for left or right use GCN65129 Boot for battery/ motor connectors Technical Specifications 12 Material Black painted aluminium alloy Size 180 x 106 x 43 mm Protection rating IPX4 Weight 1040 grams Operating Temp -25°C to 50°C DX Connectors 2 DX BUS Connectors Storage Temp -40°C to 65°C DX2 ACTUATOR MODULES DX2-ACT2/4 The DX2 actuator modules are simple to set up yet are highly configurable. Proportional joystick controlled actuators give smooth, fine control of seating for improved comfort. The use of multiple actuator modules allows control of up to 12 actuators with minimal wiring. • Proportional, switched, latched and bi-directional operation • Soft start and stop of actuators to increase user comfort • Simultaneous control of multiple actuators • Independent extend and retract drive current limits for each actuator • Individual actuator connections • Status LEDs for each channel • No direct battery connections • Actuator Control Input (ACI) allows external switches to control actuators and drive speed DX2-ACT2 Part numbers Actuator Modules DX2-ACT4 DX2-ACT2 2-channel actuator module DX2-ACT4 4-channel actuator module Connector Kits DX2LOOM-ACT Connector Kit for DX-ACT2/ACT4 Power Module Motor Motor Master Remote Battery DX2-ACT4 Up to 4 Actuators DX2-ACT2 Up to 2 Actuators Technical Specifications Material Plastic Size 114 x 72 x 25 mm Protection rating IPX4 Weight 300 grams Operating Temp -25°C to 50°C DX Connectors 2 DX BUS Connectors Storage Temp -40°C to 65°C 13 DX2 CONNECTORS DX2 Power Module Connector Kits DX2 Connectors are available in kit form or individual parts. • DX2 Power Module Kits include all connectors for motors and batteries Part numbers # per Power Module Connectors Kits DX2LOOM-PM1 DX2 Battery & Motor Connector Kit for DX2-PMA70, DX2-PMA90 1 or DX2LOOM-PM2 DX2 Battery & Motor Connector Kit for DX2-PMA70L, DX2-PMA90L 1 also Motor Connectors DX/DX2 Motor Connector Kit 2 GCN60326 DX/DX2 Motor Housing – left motor only 1 GCN60327 DX/DX2 Motor Housing – right motor only 1 DX/DX2 Motor Housing – left or right motor (unkeyed) 2 2 GCN60323 Connector Key to configure GCN60325 for left or right use 2 GCN65129 Boot for battery/ motor connectors 2 GCN0794 Connector Crimp Contacts for parkbrake (0.25 – 0.5mm2 wire) 4 GCN0781 Connector Crimp Contacts for motor 4 GSM60182 or or GCN60325 Battery Connectors 1 GME65146 DX2 Battery Connector Housing GCN8002 Connector Crimp Contacts for battery (6 – 10mm wire) 2 GCN65129 Boot for battery/motor Connectors 1 2 Accessory Connectors (required for lights and DCI) 1 GME65147 Accessory Connector Housing GCN65128 Accessory Connector Boot 1 GCN0794 Connector Crimp Contacts for 0.25 to 0.5mm2 wire 7 Connector Crimp Contacts for 1.5 to 2.5mm2 wire 7 or GCN0793 DX2 Actuator Connector Kits Available in kit form or individual parts. Part numbers # per module Actuator Connectors Kit DX2LOOM-ACT Connector Kit for DX2-ACT2/ACT4 1 Connectors and Contacts GME65345 14 Actuator Connector housing GME65347 Actuator Control Input (ACI) connector housing GME65326 ID Configuration blank plug for ACI (for 1 Actuator module only) GPC65329A ID Configuration PCB for ACI (for more than 1 Actuator module) GCN0794 Connector Crimp Contacts for 0.25 – 0.5mm2 wire GCN0793 Connector Crimp Contacts for 1.5 – 2.5 mm2 wire 2 or 4 1 1 1 4 4 or 8 DX WHEELCHAIR CONTROL SOLUTION THE DX SYSTEM The DX system is a proven and reliable power chair control system that meets a wide range of user’s needs and applications. • Modular expandable design • High performance drive control • Wide range of input and control devices • Simple connectivity of modules using DX BUS cable • Easy system configuration and programming using Dynamic Controls Wizard or Hand Held Programmer DX master Remote P DX Power Module To Battery Charger Optional DX BUS P Optional DX BUS DX BUS To HHP or Wizard (Optional) DX Secondary Remote DX-LM Lighting System Example DX Module Optional DX BUS DX-CLAMB Example DX Module Actuator Master Remotes Power Modules Secondary Remotes DX-REMG90 DX-PMB DX-ACU1 DX-REMG91 DX-PMB2 DX-RJM DX-REMG91S DX-PMB2-S DX-RJM-HD DX-REM34B DX-SLM DX-RJM-MINI DX-REM41D DX-RJM-VIC-CCD DX-REM32B DX-ACC4B DX-REM35B DX-SNP DX-ACU3B Actuator/Lighting Product Tree Environmental Control DX-ECU DX-CLAMB Other DX-LM-Z DX-ARC5 Programming DX-ACC3 DX-ARCSWB WIZARD DX-SKT-X4 DX-HHP 16 DX MASTER REMOTES The master remote is the “brains” of the DX system and every DX power chair must have one. Every master remote has an On/Off switch, a programming socket and a DX status indicator. They may also be used to control seat positioning, lighting, and environment controls. DX-REMG90 High-end joystick remote easily operated by a wide variety of users. • • • • • 5 different drive profiles 7 segment LED display and battery gauge Proportional, 4-quadrant or 3-quadrant control Access to actuator and environmental controls Supports latched actuator and simultaneous actuator operation • Optional jack sockets or toggle switches for on/off and mode control Power Module Motor Motor DX-REMG90A Battery Master Remote Part numbers DX-REMG90 Master Remote DX-REMG90A Master Remote with jack sockets DX-REMG90T Master Remote with toggle switches Technical Specifications Material Die-cast aluminium Size 143 x 71 x 169 mm Protection rating IPX4 Weight 620 grams Operating Temp -25°C to 50°C DX Connectors 2 DX BUS Connectors Storage Temp -40°C to 65°C DX-REMG91 Display/DX-REMG91S Scanner Display High-end display remote ideal for specialty control inputs. Power Module Motor Motor REMG91 Battery Secondary Remote Power Module DX-REMG91/G91S Motor • 5 different easily selectable drive profiles • 7 segment LED display and battery gauge • Support for proportional joysticks or switched inputs with 3 or 4 quadrant control • Access to actuator and environmental controls • Latched actuator operation • Three jack sockets or toggle switches for on/off and mode control • Single switch control through scanning mode (G91S) Motor REMG91S Battery Menu Switch (Optional) Scanning Switch Part numbers DX-REMG91 Display Master Remote DX-REMG91S Display Master Remote with scanner DX-GNK-KIT2 Gooseneck Mounting Kit for DX-REMG91 and DX-REMG91S Technical Specifications Material Plastic Size 125 x 85 x 32 mm Protection rating IPX4 Weight 275 grams Operating Temp -25 to 50°C DX Connectors 1 DX BUS Connector Storage Temp -40 to 65°C 17 DX-REM34B Master Remote A simple joystick remote that can be easily operated by a wide variety of users. • 5 different drive profiles • 12 button keypad with icon based buttons • Dedicated buttons for actuator selection and lighting (requires relevant DX modules) • 7 segment LED display • Horn, battery gauge and magnetic key lock Part numbers DX-REM34B Master Remote also required – DX BUS cable DX-REM34B Technical Specifications Material Plastic Size 85 x 185 x 150 mm Protection rating IP54 Weight 590 grams Operating Temp -25 to 50°C DX Connectors 2 DX BUS Connectors Storage Temp -25 to 70°C DX-REM41D Master Remote Joystick controlled remote suitable for tray mounting. • 5 different drive profiles • 12 button keypad with icon based buttons • Dedicated buttons for actuator selection and lighting (requires relevant DX modules) • 7 segment LED display • Horn, battery gauge and magnetic key lock Part numbers DX-REM41D Tray Master Remote also required – DX BUS cable DX-REM41D Technical Specifications 18 Material Black powder-coated aluminium Size 157 x 82 x 120 mm Operating Temp -25 to 50°C Weight 575 grams Storage Temp -25 to 70°C DX Connectors 1 DX BUS Connector DX-REM32B Chin Remote Easy to use joystick controlled master remote that can be operated by a user’s chin. • Optimised for chin operation • Supplied with soft foam ball and chin cup • Speed control for adjustment of maximum speed Part numbers Power Module DX-REM32B Motor DX-REM32 Chin Remote also required – DX BUS cable – Charger Socket Module DX-ACC3 Motor Battery Charger Socket Chin Remote Technical Specifications Material Black powder-coated aluminium Size 64 x 123 x 135 mm (including joystick) Protection rating IP54 Weight 700grams Operating Temp -25 to 50°C DX Connectors 2 DX BUS Sockets Storage Temp -25 to 70°C DX-REM35B Tray Remote Joystick remote ideal for simple drive-only control. • Suitable for mounting or use on a tray • Speed control for adjustment of maximum speed Part numbers Power Module Motor DX-REM35 Tray Remote also required – DX BUS cable – Charger Socket Module DX-ACC3 Motor Battery DX-REM35B Charger Socket Tray Remote Technical Specifications Material Black powder-coated aluminium Size 64 x 123 x 135 mm (including joystick) Protection rating IP54 Weight 540 grams Operating Temp -25 to 50°C DX Connectors 2 DX BUS Sockets Storage Temp -25 to 70°C 19 DX-ACU3B Master Attendant Remote A joystick remote that can be operated by an attendant or carer. • 5 different drive profiles • 7 segment LED display • Icon-based buttons, battery gauge and magnetic key lock • Push bar or hand grip mounting • On/Off button, battery gauge, and charger socket easily reached by the attendant Part numbers DX-ACU3B DX-ACU3B Master Attendant Control also required – DX BUS cable Technical Specifications 20 Material Black powder-coated aluminium Size 100 x 130 x 115 mm (including joystick) Operating Temp -25 to 50°C Weight 512 grams Storage Temp -25 to 70°C DX Connectors 2 DX BUS Sockets DX SECONDARY REMOTES In addition to a Master Remote any DX system can also have a Secondary Remote installed. This enables the user to have a wider choice of input or specialised rehab controls. Power Module Motor Motor Battery Master Remote Secondary Remote DX-ACU1 Attendant Dual Control Joystick remote that enables an attendant to drive the chair instead of the user. The attendant dual control unit may be used in addition to a secondary remote and master remote all on the same system. Power Module Motor Motor Part numbers Battery Master Remote DX-ACU1 Dual Control • Switchable control between Attendant and User • Independent speed control DX-ACU1 Attendant Dual Control also required – DX BUS cable Secondary Remote Technical Specifications Material Black powder-coated aluminium Size 90 x 62 x 120 mm Operating Temp -25 to 50°C Weight 348 grams Storage Temp -25 to 70°C DX Connectors 1 DX BUS Socket DX-RJM Remote Joystick Module Standard proportional joystick for mounting in a range of positions, e.g. chin control, mid line. Part numbers DX-RJM Remote Joystick Module DX-RJM Technical Specifications Material Black powder-coated aluminium Size 48 x 48 x 135 mm Operating Temp -25 to 50°C Weight 375 grams Storage Temp -25 to 70°C DX Connector 1 DX BUS plug on a 1.7m cable 21 DX-RJM-HD Heavy Duty Joystick Heavy duty switched joystick remote for users who might damage a standard joystick through rough handling. • Designed for robustness using heavy duty switches • 8 driving directions Part numbers DX-RJM-HD Heavy Duty Switch Joystick also required – DX BUS cable DX-RJM-HD Technical Specifications Material Black powder-coated aluminium Size 110 x 85 x 110 mm (including joystick) Weight 400 grams DX Connector 1 DX BUS Socket DX-RJM-MINI Mini Joystick Very low force proportional joystick secondary remote offering comparable performance to a conventional joystick. Power Module Motor DX-RJM-MINI Motor Part numbers Battery Master Remote DX Mini Joystick Technical Specifications 22 DX-RJM-MINI Mini Joystick Includes a mounting kit, alternative cork ball knob and interface box for connection to the power module. Interface Box Drive Profile Switch • Sealed unit, suitable for tongue, finger, thumb, hand, chin control • Light touch, low deflection operation (<10 grams) • Fully proportional control • Ergonomic shape ideal for thumb control • Fully sealed unit Material Black plastic Size 65 x 25mm dia Weight 300 grams DX Connector 1 DX BUS plug on a 2m cable Requires switch for drive profile. DX-RJM-VIC-CCD Finger Steering Control Non contact proportional finger control for use by users with limited finger strength. • Designed for finger control with zero force required • Full proportional control with no physical contact • Any angle mounting Please note additional protection is required if driving outdoors in wet conditions. Power Module DX-RJM-VIC-CCD Motor Motor Part numbers DX-RJM-VIC-CCD Finger Steering Control Battery Master Remote Finger Steering Control Technical Specifications Material Plastic Size 75 x 75 x 34mm Weight 375 grams DX Connector 1 DX BUS Socket on a 1m lead DX-ACC4B Switch Interface Input module for up to 5 switches. • 9 pin D-type connector • Ideal for use with 3-quadrant and 4-quadrant switched head controls • Simple driving interface with up to 8 driving directions • Provides power to active switch controls Power Module Part numbers Motor Motor DX-ACC4B Switch Interface also required – DX BUS cable, switches DX-ACC4B Battery Four Switch Interface Master Remote Various Switch Options Technical Specifications Material Plastic Size 90 x 55 x 25 mm Weight 120 grams DX Connector 1 DX BUS Socket 23 DX-SNP Sip and Puff Interface Sip and Puff control that can be fine tuned to suit any user or application. DX-SNP • Fully programmable sip and puff pressures • 7 standard drive programs • Latched driving (step or progressive step) with optimised safety through programmable emergency stop and latched time options • Easy custom programming using DX Hand Held Programmer • Optimum safety through programmable Emergency Stop and Latch Time options • Mode Control feature Power Module Motor Motor Battery Master Remote DX-SNP Hose Optional Emergency Stop Switch Part numbers DX-SNP Sip and Puff Module also required – DX BUS cable GSM9977 Sip and Puff Mounting Kit GSM9942 SNP Filter SW932662 Set of 10 straws SWTA5100 SNP breath operated mode switch Technical Specifications Material Grey aluminium Weight 320 grams Hose size 3.5 mm (1/8”) ID DX Connector 1 DX BUS Socket Size 125 x 85 x 30 mm GSM9977 Sip & Puff Mounting Kit A complete set of parts required to operate the Sip and Puff module. Contains: • 21 inch gooseneck • Air Tube Straws x 2 • Tubing x 1m • Wheelchair clamp • Saliva trap Part numbers GSM9977 GSM9977 24 Sip and Puff Mounting Kit DX POWER MODULES The DX power modules provide excellent response and driving control in all terrain and are available to suit all mid, rear and front wheel drive configurations. DX-PMB/PMB2/PMB2-S • 60A or 80A dual channel or 160A single channel • Dynamic Controls load compensation algorithm • Fully programmable to suit all DC motor power chairs • Advanced safety and protection features • Compact, rugged enclosure sealed against dust and water • 2 DX BUS connectors for easy system expansion • Visible “flash code” diagnostics DX-PMB Part numbers DX-PMB DX Power Module (60A per channel) DX-PMB2 DX Heavy Duty Power Module (80A per channel) DX-PMB2-S DX Servo Power Module (160A Single Channel) also required – DXLOOM-PM Connector Kit Connector Kits DXLOOM-PM DX Connector Kit Technical Specifications Compatible motors 24 volt DC, Permanent magnet Storage Temp -25 to 70°C Compatible park brakes 12 or 24 volt DC Size 185 x 125 x 45 mm Material Aluminium Weight 1.4 kilograms Protection rating IP54 DX Connectors 2 DX BUS Sockets Operating Temp -25 to 50°C DX-SLM Servo Lighting Module Servo steering module for use on wheelchairs that have a separate motor for servo control of steering castors. Power Module (1 or 2 channel) Optional Motor Motor Master Remote Battery DX-SLM • Control of steering servo with potentiometer steering feedback • Provision of lighting outputs • Range of programming options to give optimum performance on any servo steered wheelchair Part numbers DX-SLM DX-SLM Lighting System Servo Steering Motor Servo Lighting Module also required – DX BUS cable, DXLOOM-SLM, DXLOOM-PM Connector Kit, DX-PMB2 or DX-PMB2-S Technical Specifications Compatible motor 24 Volt DC, Permanent magnet Operating Temp -25 to 50°C Servo motor current 30A (peak), 5A (continuous) Storage Temp -25 to 70°C Size 210 x 123 x 38 mm Material Black powder coated aluminium Weight 530 grams Protection rating IP54 DX Connectors 2 DX BUS Sockets 25 DX LIGHTING AND ACTUATOR MODULES DX-CLAMB Combined Lighting and Actuator Module Single module providing both lighting and seat actuator functions from a single module. Power Module DX-CLAMB Motor Motor Master Remote Battery DX-CLAMB • Actuator control of up to five separate seat actuators • Independent current level trips for each actuator • 3 channel lighting support for indicators, hazard lights, driving lights • No direct battery connections required, all power sourced via the DX BUS • External switch inputs can be programmed to slow or stop chair driving if activated Part numbers DX-CLAMB Combined Lighting and Actuator Module also required – DX BUS cable, DXLOOM-AUX Connector Kit Up to 5 Actuators Lighting System Technical Specifications Material Grey aluminium Protection rating IP54 Continuous lighting current 1A (each indicator) 2A (driving light) Operating Temp -25 to 50°C Size 85 x 125 x 30 mm Storage Temp -25 to 70°C Weight 410 grams 3 – 12A (programmable) DX Connectors 2 DX BUS Sockets Actuator Current Limit DX-LM-Z Lighting Module Provides all of a wheelchair’s lighting requirements. • 3 channel lighting support for indicators, hazard lights, driving lights • No direct battery connections, all power sourced via the DX BUS • Short and open circuit detection for lamps Part numbers Power Module DX-LM-Z Motor Motor DX-LM-Z Lighting Module also required – DX BUS cable, DXLOOM-AUX Connector Kit Master Remote Battery DX-LM-Z Lighting System Technical Specifications 26 Material Grey aluminium Protection rating IP54 Continuous lighting current 1A (indicators) 2A (driving lights) Operating Temp -25 to 50°C Size 125 x 85 x 29 mm Storage Temp -25 to 70°C Weight 400 grams DX Connectors 2 DX BUS Sockets DX-ARC5 Actuator Remote Control Separate hand-held remote control for actuators. • • • • Power Module DX-ARC5 Simple operation Controls up to 5 actuators Can be used with DX or DX2 actuator modules Programmable options to allow seat position to be adjusted while driving Part numbers Motor Motor Master Remote Battery DX-ARC5 Actuator Remote Control Module Please note an actuator module is also required. DX-CLAMB DX-ARC5 Actuators Technical Specifications Material Plastic Size 61 x 135 x 24.5 mm Protection rating IPX4 Weight 150 grams Operating Temp -25 to 50°C DX Connector 1 DX BUS plug on a 2m cable Storage Temp -25 to 70°C DX-ARC-SWB Actuator Remote Control Switchbox Control of up to 5 seat positioning actuators using switches connected to a 15 pin D-type connector. Power Module Motor Motor Master Remote Battery DX-ARC-SWB • Alternative for users who have difficulty using actuator controls • Remote control for actuators using a choice of external switches (customer supplied) • Simple operation • Can be used with DX or DX2 actuator modules • Switched 24V, 1A auxiliary power supply output Please note that this unit cannot be used at the same time as a DX-ARC5. DX-CLAMB Part numbers Actuators DX-ARC-SWB DX-ARC-SWB Actuator Remote Control Switchbox Up to 10 switches Technical Specifications Material Black powder coated aluminium Weight 100 grams Operating Temp -25 to 50°C DX Connector 2 DX BUS sockets Storage Temp -25 to 65°C Auxiliary Output Current 1A Size 95 x 61 x 26 mm 27 DX ENVIRONMENTAL CONTROLS DX-ECU Environmental Control Unit Environmental control of up to 8 switched outputs using the same user input device as used for driving. Power Module DX-ECU Motor Motor Master Remote Battery Part numbers DX-ECU DX-ECU 8 Relay Switches Page Turner Computer Any Scan Switched Device Device ECU in “8-Output” mode • Interface to on-chair devices such as laptop computers or communication aids • Independent control of up to 8 separate functions or devices per DX-ECU • “Mouse mode” for operating a computer mouse mover • Up to 2 ECUs can be operated in a single DX system • Can be used with DX or DX2 master remotes that support ECU Mouse Mover ECU in “Mouse” mode DX-ECU Environmental Control Unit also required – DX BUS cable Please note a Master Remote that supports ECU functionality is required. Technical Specifications Material Grey aluminium Weight 400 grams Protection rating IP54 DX Connector 1 DX BUS Socket Size 125 x 85 x 29mm DX-MTX Infra-red Mouse Transmitter Infra-red mouse transmitter that allows powerchair users to drive a computer mouse directly from their joystick with full proportional control. • Operates with DX2-REM550/551 • PC mouse control via infra-red (IR) link • 360 degree transmission reducing precision required to point and activate • Small and lightweight • Permanent or temporary mounting Power Module DX-MTX Motor Motor DX2 Master Remote Battery DX-MTX DX-PCMR It is used together with the DX-PCMR. Part numbers DX-MTX Infra-Red Mouse Transmitter also required – DX-PCMR Computer Technical Specifications 28 Material Plastic Size 55 x 50 x 40 mm Protection rating IP54 Weight 150 grams Operating Temp -25 to 50°C DX Cable length 1.7m Storage Temp -25 to 70°C DX-PCMR Infra-red Mouse Receiver Infra-red mouse receiver that allows powerchair users to drive a computer mouse directly from their joystick with full proportional control. DX-PCMR Power Module Motor Motor DX2 Master Remote Battery DX-USB-COM • • • • • • DX-MTX DX-PCMR Infra-red (IR) receiver Serial port or use with USB adapter DX-USB-COM Small and lightweight No special software required PC compatible Permanent or temporary mounting Part numbers DX-PCMR Infra-Red Mouse Transmitter also required – DX-MTX or DX-IRIS2 Required for USB – DX-USB-COM Computer Technical Specifications Material Plastic Size 55 x 50 x 40mm Protection rating IP54 Weight 100 grams Operating Temp -25 to 50°C Cable length 1.5m Storage Temp -25 to 70°C DX-IRIS2 Infra-red Interface Transmitter System Allows any device operated by an infra red remote control to be operated from a wheelchair. • • • • • • Operates with DX2-REM550/551 Infra-red (IR) transmitter Environmental control via IR Learns commands directly from IR remote control PC mouse control via IR 360 degree transmission reducing precision required to point and activate • Small and lightweight • Permanent or temporary mounting DX-IRIS2 Part numbers DX-IRIS2 Infra-red Interface System also required – DX-PCMR for mouse control Technical Specifications Material Plastic Size 55 x 50 x 40 mm Protection rating IP54 Weight 150 grams Operating Temp -25 to 50°C DX Cable length 1.7m Storage Temp -25 to 70°C 29 DX-ACC3 Charger Socket Module Provides separate battery charging socket for 24 Volt Battery Chargers up to a maximum of 8A. Part numbers DX-ACC3 DX-ACC3 Power Module Motor Motor Battery Charger Socket Technical Specifications 30 Material Plastic Size 64 x 44 x 49 mm Weight 160 grams DX Connector 1 DX BUS Plug on a 1.5 cable Master Remote Charger Socket Module DX SWITCHES SWTA5018 Wafer Switch A five switch unit built into a low-profile housing. • Slightly recessed switches that are 60 mm in diameter • Marked with direction control • 9 pin D-Type connector Part numbers SWTA5018 Wafer Switch SWTA5018 Technical Specifications Size 400 x 150 x 13 mm Force 100 grams SWTA5024 Penta Switch Miniature five way switch. • For fine motor skills and good targeting ability • Easily used in the palm of the hand or on a flat surface • 9 pin D-Type connector Part numbers SWTA5024 Penta Switch SWTA5024 Technical Specifications Size 13 x 50 mm dia. Force 120 grams 31 SWTA5020 Mini Joystick with Push Five switch joystick activation(4 directions, push down for the 5th switch). • Can be easily mounted for hand or chin operation • 9 pin D-type connector Part numbers SWTA5020 Mini Joystick with Push SWTA5020 Technical Specifications Size 120 x 30 mm Force 120 grams (200 grams for Push) SWTA5026Star Switch A five way multiple switch that comes with five coloured dots. • Slightly recessed switches that are 60 mm in diameter • 9 pin D-type connector Part numbers SWTA5026 SWTA5026 Technical Specifications 32 Size 230 x 230 x 13 mm Force 150 grams Star Switch Buddy Button Robust but sensitive single switch that is available in a wide range of colours. Terminated with a 3.5mm jack plug. Part numbers SWTA5710 Buddy Button - Red SWTA5720 Buddy Button - Green SWTA5730 Buddy Button - Purple SWTA5740 Buddy Button - Pink SWTA5750 Buddy Button - Yellow SWTA5760 Buddy Button - Blue For DX-REMG91S monitored against disconnection SWTA9993 Buddy Button - Purple (monitored, use with DX-REMG91S) Technical Specifications Size 20 x 65 mm dia. Force 100 - 200 grams Micro Lever Switch Small switch with low operating force available in a range of colours. Terminated with a 3.5mm jack plug. Part numbers SWLA70M, SWLA70MG, SWLA70MR SWLA70M Micro Lever Switch - Black SWLA70MR Micro Lever Switch - Red SWLA70MB Micro Lever Switch - Blue SWLA70MY Micro Lever Switch - Yellow SWLA70MG Micro Lever Switch - Green Technical Specifications Size 40 x 36 x 20 mm Force 100 grams 33 Mini Cup Switch Very small switch for people with good targeting ability. Part numbers SWTA5808 Mini Cup Switch SWTA5808 Technical Specifications Size 25mm diameter, 9mm high Force 130grams GSM9976 5 to 1 Switch Adaptor This adaptor allows four or five single switches to be used in place of a multiple switch. • 9 pin D-type connector (TASH compatible wiring) • Plugs into DX switch interface modules • Ideal assessment aid to select locations of single switches GSM9976 Part number GSM9976 Technical Specifications 34 Length 150 mm Weight 54 grams 5 to 1 Switch Adaptor DX CABLES AND CONNECTORS DX BUS Cables DX and DX2 modules connect using small, flexible, 4 wire DX BUS cables. • Available in various lengths and types to support a variety of mounting options Part numbers Straight Cables GSM63003DX BUS cable 0.3m GSM63005 DX BUS cable 0.5m GSM63010 DX BUS cable 1.0m GSM63015 DX BUS cable 1.5m GSM63020 DX BUS cable 2.0m GSM63025 DX BUS cable 2.5m Curly Cables GSM63051 GSM63052 GSM63051 DX BUS curly cable 0.8m (compressed) DX BUS curly cable 1.1m (compressed) Extension Cables GSM65433 GSM63081 DX BUS male-female extension cable 0.3m DX BUS male-female extension cable 1.0m DX-SKT-X4 DX BUS 4 Way Socket Provide additional DX BUS sockets to attach extra DX modules. Part numbers DX-SKT-X4 DX BUS 4 Way Socket also required DX BUS cables DX-SKT-X4 Technical Specifications Size 23 x 93 x 22 mm Weight 53 grams DX Connectors 4 DX BUS Sockets 35 GME64909 DX BUS Connector Cover The DX BUS connector protects unused DX BUS sockets against contamination or accidental short circuit. Part numbers GME64909 DX BUS Connector Cover GME64909 Technical Specifications Size 16.5 x 12.5 x 10.3 mm Colour Black DX Connector Kits DX connectors are available in kit form or as preassembled looms. • DX Power module connector kits include all connectors for the motors and batteries • Some are compatible with DX2 Power Modules as noted below Please note if ordered separately 2 Motor Connector Kits and 1 Battery Connector Kit are required for each Power Module. DXLOOM-PM Part numbers DXLOOM-PM DX Power Module Connector Kit # per Power Module 1 or GSM60180 DX Battery Connector Kit 1 GSM60182 DX/DX2 Motor Connector Kit 2 also GCN60325 DX/DX2 Motor Housing – left or right motor GCN60326 DX/DX2 Motor Housing – left motor only GCN60327 DX/DX2 Motor Housing – right motor only GCN0791 DX Battery Housing 1 1 1 GCN0787 DX/DX2 Motor Housing Cover 1 GCN0788 DX Battery Housing Cover 1 GCN0781 DX/DX2 Motor/Battery Contact GCN0793 DX/DX2 Park Brake Contact 36 2 8 4 DX Pre-assembled Leads Separate connector covers are also available for these looms. • Some are compatible with DX2 Power Modules as noted below Part numbers GSM61190 GSM61191 GSM61192 GCN0788 GCN0787 DX Battery Loom – 450mm DX/DX2 Left Motor Loom – 700mm DX/DX2 Right Motor Loom – 700mm DX Battery Connector Cover DX/DX2 Motor Connector Cover # per Power Module 1 1 1 1 2 GSM61192 DX Lighting and Seating Module Connectors Available as kits or individual parts. Part numbers DXLOOM-AUX DX Auxiliary Connector Kit # per Module 1 or GCN0795 DX Auxiliary Connector Cover 1 GCN0796 DX Auxiliary Connector Housing 1 GCN0793 DX Auxiliary Crimp Pin 21 DX-LOOM-AUX Connector Tools Crimping, insertion and extraction tools are available for the pins used in the DX and DX2 connectors. It is recommended they be used for volume production of wiring looms. Positronic Crimp Tool and Turret CRIMP9999 • For circular Positronic pins (GCN0793, GCN0794) • Used for connecting the park brakes, lights and seat actuators • Supplied as a separate hand tool and crimp turret CRIMP9998 37 Connector Tools (continued) Positronic Insertion and Extraction Tool • For assembly and removal of the Positronic pins CRIMP9996 AMP Innergy Tool and Die • For crimping DX / DX2 motor pins and DX battery connection pins • Supplied as a separate hand tool and crimp die Part numbers CRIMP9995 CRIMP9994 38 CRIMP9999 Positronic Crimp Tool CRIMP9998 Positronic Crimp Turret CRIMP9997 Positronic Insertion Tool CRIMP9996 Positronic Extraction Tool CRIMP9995 AMP Innergy Crimp Tool CRIMP9994 AMP Innergy Crimp Die DX TEST EQUIPMENT DX-BCT DX BUS Cable Tester Simple pass or fail tester for all DX BUS cables. • Test for short circuits or open circuits Part numbers DX-BCT DX BUS Cable Tester DX-BCT Technical Specifications Size 80 x 150 x 55 mm DX Connectors Weight 225 grams 2 AA batteries are included. 2 DX BUS Sockets DX-CMT DX CLAM Tester Tests all functions of the Combined Lighting and Actuator Module (DX-CLAMB). • Plugs into the Combined Lighting and Actuator Module in place of the wheelchair’s lights and seat actuators • No batteries are required DX-CMT Part numbers DX-CMT Tester Weight 189 grams Technical Specifications Size 81 x 145 x 42 mm DX-ACC4T Switch Tester Ideal for selecting the best multiple switch for an individual to use and testing that multiple switches are operating correctly. Part numbers DX-ACC4T Switch Tester 9V battery included. DX-ACC4T Technical Specifications Size 65 x 104 x 40 mm Weight 100 grams 39 40 SHARK WHEELCHAIR CONTROL SOLUTION THE SHARK SYSTEM The SHARK System is a versatile and cost-effective Powerchair control solution designed to fit the majority of standard power chair applications. Key Features: • Excellent drive performance and efficiency using separate power and remote modules • Two optional seat actuators driven directly from the power module • Optional full lighting support • Optional attendant control of drive and seat functions • Simple product configuration using the Hand Held Programmer (DX-HHP) or the Wizard PC program • Variety of cable options • Programmable inhibit and speed control functions via the flexible multi-function DCI pins • Dynamic Controls quality and reliability Remote M2 24V Battery Battery Charger Power Module M1 Bus Cable Bus Cable Attendant Control Unit (Optional) Y-Cable Wizard PC-based Programmer Bus Cable SHARK Remote only Hand Held Programmer SHARK Remote + Attendant Control Unit SHARK Selection Guide Select from multiple Power and Remote Module options to create a system suitable for drive only, drive + actuator, drive + lights or drive + actuators + lights. Select either the robust 60A Power Module or the 75A with boost for curb-climbing, hill starting and turning on thick carpets. Drive Only Drive + Actuators Drive + Lights Drive + Actuators + Lights Remote DK-REMD01 DK-REMD11 DK-REMD31 DK-REMD21 Power Module DK-PMB40 (40A) or DK-PMB11 (60A, 1 Act.) or DK-PMB31 (75A) DK-PMB21 (75A, 2Act.) DK-PMB50 (50A) DK-PMB21 (75A, 2 Act.) DK-PMB60 (60A) DK-PMC21 (90A, 2 Act.) DK-PMB01 (75A) DK-PMC01 (90A) 42 SHARK REMOTE MODULES DK-REMD01/11/21/31 The DK-REMD is a stylish modern joystick remote that is simple to use and configure. Key features: • Dynamic Controls Virtual Speed Pot technology • Circular speedometer • Field replaceable Bus cables Part numbers DK-REMD01 Basic Remote for drive only DK-REMD11 Remote for drive only + 2 Actuators DK-REMD21 Remote for drive only + 2 Actuators + Lights DK-REMD31 Remote for drive only + Lights DK-REMD21 Technical Specifications Material Polymer Storage Temp -40 to 65°C Protection Rating IPX4 Size 193 x 77 x 119 mm Operating Temp -25 to 50°C Weight 400 grams DK-ACU A joystick remote that can be operated by an attendant or carer. Key features: • Control of both drive and actuator functions • Simple user interface via a speed pot and toggle switch Part numbers DK-ACU Attendant Remote GSM80951 Y cable 150mm/5.9” length DK-ACU Technical Specifications Material Aluminium Storage Temp -40 to 65°C Protection Rating IPX4 Size 127 x 64 x 114 mm (including joystick) Operating Temp -25 to 50°C Weight 305 grams 43 SHARK POWER MODULES DK-PMB40/50/60 Basic drive only power module. Key features: • 40A or 50A, or 60A power module • Three fully programmable drive profiles that simplifies dealer programming • Flexible programming options for all chair configurations Part numbers DK-PMB60 DK-PMB40 Basic 40A Power Module for drive only DK-PMB50 Basic 50A Power Module for drive only DK-PMB60 Basic 60A Power Module for drive only DK-PMB01/11/21/31 The DK-PMB x1 builds on the successful DK-PMB60 by adding programmable boost features and optional actuators and lighting. Key features: • Programmable 15A boost current to provide extra power when needed (75A) • Optional 1 or 2 built in actuators • Optional built in lighting Part numbers DK-PMB21 DK-PMB01 Basic 60A + 15A boost Power Module for drive only DK-PMB11 60A + 15A boost Power Module for drive only + 1 Actuator DK-PMB 21 60A + 15A boost Power Module for drive only + 2 Actuators + Lights DK-PMB 31 60A + 15A boost Power Module for drive only + Lights DK-PMC01/21 The DK-PMC builds on the successful DK-PMB01 by adding programmable boost features and optional actuators and lighting. Key features: • Programmable 75A boost current to provide extra power when needed (90A) • Optional 1 or 2 built in actuators • Optional built in lighting Part numbers DK-PMC21 DK-PMC01 Basic 75A + 15A boost Power Module for drive only DK-PMC 21 75A + 15A boost Power Module for drive only + 2 Actuators + Lights Technical Specifications 44 Material Die cast, powder coated Storage Temp -40 to 65°C Protection rating IPX4 Size 181 x 111 x 48 mm Operating Temp -25 to 50°C Weight 960 grams SHARK CABLES Shark BUS Cable One cable is required to connect remote module to power module. Available in a variety of lengths. Part numbers GSM80241 2.5m/8’2” GSM80242 2.0m/6’6” GSM80233 1.5m/4’11” GSM80234 1.0m/3’3” GSM80236 0.5m/1’7.7” GSM80234 Shark BUS Extension Cable May be used to extend standard bus cable if required. Part numbers GSM80231 GSM80203 300mm/1ft GSM80220 300mm/1ft (with panel mounting spring) GSM80211 640mm/2’1” GSM80221 640mm/2’1” (with panel mounting spring) GSM80231 0.9m/2’11” GSM80224 0.9m/2’11” (with panel mounting spring) GSM80232 1.2m/3’11” Motor/Park Brake Leads Part numbers GSM61191 700mm/2’3.5” Motor 1 GSM61191P 700mm/2’3.5” Motor 1(Keyed/Polarized) GSM61192 700mm/2’3.5” Motor 2 GSM61192P 700mm/2’3.5” Motor 2 (Keyed/Polarized) GSM61191 Battery Leads Part numbers GSM80204 GSM80204 0.5m/ 1’7.7” GSM80213 1.0m/3’3” 45 SHARK CONNECTORS Battery & Motor Kits Battery and Motor connectors are sold as kits. Each kit includes housings, connector boots and all required pins. Part numbers GSM60182 GSM80210 Unkeyed motor + Battery Connector Set GSM80209 Keyed motor + Battery Connector Set GSM80208 Battery Connector Set GCN60325 Single Motor Connector Kit-unkeyed (use when ordering one-off) GCN60326 Single Motor Connector Kit – Left keyed GCN60327 Single Motor Connector Kit – Right keyed GCN60323 Connector Key to configure GCN60325 for left or right Note: DX2 battery and motor connectors can also be used with Shark. See page 14. DCI Port 4 Way DCI connectors sold as a complete kit (including housing and pins) or as individual housings and pins. Part numbers GSM80206 4 Pin Kit (inc housing and 4 pins) GCN8005 GCN0978 Individual Connector Housing (AMP Mate Nlok2 Mini 4W Hse #794188-1) Individual pins 16-20 AWG (AMP Mate Nlok2 Mini receptacle #794223-1) GSM80206 DCI Port 12 Way DCI connectors sold as a complete kit (including housing and pins) or as individual housings and pins. Part numbers GSM80226 46 GSM80226 12 Pin Kit (includes housing and 12 pins) GCN8004 GCN0691 Individual Connector Housing (AMP Mate Nlok2 Mini 12W Hse #172170-1) Individual pins 16-20 AWG (AMP Mate Nlok2 Mini receptacle #794231) A-SERIES INTEGRAL WHEELCHAIR CONTROLLER A-SERIES INTEGRAL WHEELCHAIR CONTROLLER The A-series is a high quality yet cost effective 50A integrated controller for power wheelchairs. It offers class leading drive performance and is ideal for lightweight or folding chairs and drive only applications. Key features: • Easy to use joystick control with large buttons and clear icons • Zero rollback on slopes • Stability control technology provides excellent driving for all chair types • “Virtual Speed Pot” for proportional speed selection • A choice of industry standard connectors • Enhanced maintenance functions Part numbers A-Series Motor Battery Motor DA50-A41 A-Series 50A, 1030mm loom, Anderson Connectors DA50-B41 A-Series 50A, 1030mm loom, Beau Connectors DA50-C41 A series 50A, 1030mm loom, DK Connectors DA50-C51 A series 50A, 1300mm loom, DK Connectors A-Series Connector Types DA50-A41 DA50-B41 DA50-C51 Technical Specifications 48 Material Polymer Top, Aluminum Bottom Case Storage Temp -40 to 70°C Protection rating IPX4 Size 194 x 153 x 79 mm Operating Temp -25 to 50°C Weight 1.25Kg / 2.75 lbs R-SERIES SCOOTER CONTROLLER R-SERIES SCOOTER CONTROLLERS The R-Series is a high quality, value for money scooter controller that will provide a refined drive experience, available in 50A and 90A versions. R-series DR50-A01 Motor Battery Tiller Head Key features: • Advanced kerb climbing and hill starting capabilities • Greater safety through improved stability and control when turning • Programmable acceleration curves, zero roll back on slopes • Industry standard connections and mounting • Two drive profiles • Brake and reverse lights • Advanced diagnostics and smart servicing indicator Part numbers DR50-A01 R-Series 50A Scooter Controller DR90-A01 R-Series 90A Scooter Controller DR90-A01 Technical Specifications Material Die-cast aluminum base, plastic cover (UL94 V-O rating) Operating Temp -25 to 50°C Size 131.5 x 72.5 x 40 mm Protection rating IPX5 Weight 260 grams R-SERIES CONNECTORS Complete set of all connectors required to install R-Series controllers. Part numbers DR-CONSETA R-Series Connector Kit DR-CONSETA 50 RHINO SCOOTER CONTROLLER RHINO SCOOTER CONTROLLERS The Rhino controller is a robust, high quality scooter controller that may also be used for other applications requiring precise motor control in forward and reverse directions. Rhino controllers are available in 70A, 110A and 160A variants to meet the requirements of all types of scooter. Key features: • Smooth power delivery • Automatic speed adjustment to compensate for changes in driving surfaces • Choice of controls – single ended throttle or wig wag • Designed for safety • High level of environmental protection • Enhanced system protection including motor and batteries • Fully programmable drive profiles DS72K01 Rhino Part numbers Motor Battery Tiller Head DS72K01 Rhino 70A Controller DS72KB02 Rhino 70A Controller with lights DS72KA04 Rhino 70A Controller with seat lift DS112K01 Rhino 110A Controller DS112KB02 Rhino 110A Controller with lights DS162KD01 Rhino 160A Controller with lights or reverse beeper Technical Specifications Material Die-cast aluminum with plastic cover Size 155mm x 100mm x 45mm Protection rating IPx4 Weight 650 grams Operating Temp -25 to 60ºC Rhino Connectors Complete set of all connectors required to install a Rhino controller. Part numbers DSLOOM-72K 52 DSLOOM-72K Rhino Connector Kit (70A controller) DSLOOM-112K Rhino Connector Kit (110A controller) DSLOOM-162K Rhino Connector Kit (160A controller) PROGRAMMING PROGRAMMING Dynamic Controls provides two programming tools for configuring products: • Hand Held Programmers (HHP) - a convenient hand held device. • Wizard – PC Programming tool HAND HELD PROGRAMMERS The Hand Held Programmers (HHP) allow wheelchair and scooter manufacturers, dealers and health professionals to adjust the system settings to suit a particular wheelchair, scooter or individual. Key features: • Access to the most commonly changed settings • 4 line full text display • Easy to understand fault conditions DX-HHP (for all products except Rhino) HHP are sold as a complete kit that includes all the required adaptors. It is compatible with DX2, DX, Shark, A- series and R-series. Part numbers DX-HHP Hand Held Programmer for all products except Rhino DX-HHP Rhino Hand Held Programmer The Rhino HHP is specific for the Rhino product family. No Adaptors required. Part numbers DS2K-PD Dealer Hand Held Programmer for Rhino DS2K-PI DS2K-PD 54 OEM (Manufacturer) Hand Held Programmer for Rhino WIZARD PC PROGRAMMING TOOL Wizard is a software programming tool designed to program, configure and diagnose all products from Dynamic Controls. It is intended for manufacturers, dealers and therapists. Key features: • Operates under Microsoft Windows • Supports all Dynamic Controls’ products • Simple to use Part numbers DWIZ-KIT Wizard program on CD plus all cables & adaptors DWIZ-KIT Dongles A dongle is a hardware security device that plugs into your computer to prevent unauthorised access to product parameters. Product safety and integrity are protected by the dongle. Using the correct dongle level ensures Wizard operators only have access to functions they are trained to use. Part numbers DWD-OEM-U DWD-DLR-U Dealer – Allows customisation to specific users DWD-EDL-U Enhanced Dealer – Dealer access plus ability to edit auxiliary function options DWD-OEM-U OEM – access to all parameters required by a manufacturer DWD-FAC-U Factory – prevents unauthorised changes in a production environment 55 Programming Adaptors and Wizard Kit replacement parts In the event of loss or accidental damage replacements can be ordered individually. Part numbers DWIZ-CABLE Wizard Communications Cable DWIZ-ADAPT Programming adaptor for DX2, A-series, R-series & Shark* DX-USB-COM Serial to USB adaptor DWIZ-S/W Wizard software on CD DK-ADAPT DX-HHP to Shark adaptor DR-PRGLM02 Used with DWIZ-ADAPT for R-series without a charger socket *Can be used between Wizard and Shark but not DX-HHP and Shark 56 MOTORS MOTORS Dynamic Controls wheelchair motors are specifically designed for wheelchairs and are optimized for high performance and long range. They are ideal for indoor/outdoor chairs and are compatible with any Dynamic control system. Key features: • Low noise, maintenance free gearbox • Built in clutch • Supplied with connectors pre-fitted • Ready to mount directly onto a wheelchair frame or flat plate Part numbers WMT 90102 WMT90482 M3 Motor Set WMT90483 M3 Motor – left WMT90484 M3 Motor – right WMT90496 M3V Motor Set – Vertical Mounting WMT90497 M3V Motor Left – Vertical Mounting WMT90498 M3V Motor Right – Vertical Mounting WMT90102 M4 Motor Set WMT90103 M4 Motor Set Left WMT90104 M4 Motor Set Right WMT90402 M5 Motor Set WMT90403 M5 Motor – left WMT90404 M5 Motor – right WMT90422 M6 Motor Set WMT90423 M6 Motor – left WMT90424 M6 Motor – right WMT90442 M7 Motor Set WMT90443 M7 Motor left WMT90444 M7 Motor right WMT90462 M8 Motor Set WMT90463 M8 Motor – left WMT90464 M8 Motor – right Technical Specifications 58 Motor Type Peak Rated Power No load Consumption (W) Current (A) Rated Torque (Nm) Rated Speed (rpm) Gearbox Ratio Peak Current Weight (Kg) M3 180 14.0 115 1/32 40 6.0 3 M4 230 3.3 Not available 120 1/32 Not available 6.5 M5 320 3 14.2 115 1/32 50 6.9 M6 560 4.5 16.5 166 1/28 65 9.9 M7 680 6 24.4 132 1/32 80 7.9 M8 635 6 15.4 202 1/21 65 12.1 ACCESSORIES 59 ACCESSORIES Charger Plug 3 pin plug for connecting battery chargers to all Dynamic Controls wheelchair and scooter controls. Part numbers GCN0309 Charger Plug Connections: Pin 1 Pin 2 Pin 3 B+, Battery Positive B-, Battery Negative Linked to Pin 2, inside plug Linking pins 2 and 3 inside the charger plug will stop the wheelchair or scooter from being driven away with the battery charger plugged in. Circuit Breakers Part numbers GCK0011 GCK0011 Circuit Breaker – 40A GCK0014 Circuit Breaker – 60A Joystick Knobs Alternative fittings to add to any Dynamic Controls joystick to enable customisation for an individual. Part numbers Clockwise from top left: Sponge Ball, Golf Ball Knob, Finger Tube, Wrist Plate, Round T-Bar, Straight Bar, Flat T-Plate, Joystick Knob, Joystick Skirt (towards middle), DL Knob, Carrot Knob, Standard Ball Knob (towards centre), Chin Cup. 60 GJS0003 Standard Ball Knob (30 mm) GJS0031 Carrot Knob GJS0040 DL Knob GJS26819 Chin Cup (use with GJS0029) GJS26826 Sponge Ball (use with GJS0029) GJS9983 Golf Ball Knob GJS0029 Joystick Metal Insert GJS0022 Wrist Plate (chrome) GJS0033 Round T-Bar (chrome) GJS0044 Flat T-Plate (chrome) GJS0055 Straight Bar (chrome) GJS0066 Finger Tube (chrome) GJS0090 Joystick Knob GJS0091 Joystick Skirt Magnetic Key For use with Master Remotes that have the magnetic keylock feature. Part numbers DC-MKEY Magnetic Key DC-MKEY Wheels and Tyres These aluminium wheels are supplied complete with pneumatic tyres and tubes. Part numbers WHL90002 12.5”/31.75cm diameter WHL90022 12.5”/31.75cm diameter 8 spoke wheel WHL90002 WHL90022 61 INDEX 62 Part numbers Pages Part numbers Pages Part numbers Pages CRIMP9994 CRIMP9995 CRIMP9996 CRIMP9997 CRIMP9998 CRIMP9999 DA50-A41 DA50-B41 DA50-C41 DA50-C51 DC-MKEY DK-ACU DK-ADAPT DK-PMB60 DK-PMB01 DK-PMB11 DK-PMB21 DK-PMB31 DK-REMD01 DK-REMD11 DK-REMD21 DK-REMD31 DK-PMC01 DK-PMC21 DR-CONSETA DR50-A01 DR90-A01 DR-PRGLM02 DS112K01 DS112KB02 DS162KD01 DS2K-PD DS2K-PI DS72K01 DS112K01 DS72KA04 DS72KB02 DS112KB02 DS116KD01 DSLOOM-112K DSLOOM-72K DSLOOM-162K DWD-DLR-U DWD-EDL-U DWD-FAC-U DWD-OEM-U DWIZ-ADAPT DWIZ-CABLE DWIZ-KIT DWIZ-S/W DX2-ACT2 DX2-ACT4 DX2LOOM-ACT DX2LOOM-PM1 DX2LOOM-PM2 DX2-PMA70 DX2-PMA70L DX2-PMA90 DX2-PMA90L DX2-REM550 DX2-REM551 DX-ACC3 DX-ACC4B DX-ACC4T DX-ACU1 DX-ACU3B DX-ARC5 DX-ARC-SWB DX-BCT DX-CLAMB DX-CMT DX-ECU DX-GNK-KIT2 DX-HHP DX-IRIS2 DX-LM-Z 38 38 38 38 37, 38 37, 38 48 48 48 48 61 43 56 42, 44 43, 44 42, 44 42, 44 42, 44 42, 43 42, 43 42, 43 42, 43 44 44 50 50 50 56 52 52 52 54 54 52 52 52 52 52 52 52 52 52 55 55 55 55 56 56 55 56 4, 8, 13, 14 4, 8, 13, 14 13, 12 12, 14 12, 14 4, 8, 12, 14 4, 8, 12, 14 4, 8, 12, 14 4, 8, 12, 14 4, 8, 9, 10, 28, 29 4, 8, 9, 10, 28, 29 8, 16, 19, 30 5, 8, 9,16, 23 39 4, 8, 16, 21 5, 9, 10, 16, 20 5, 9, 16, 27 5, 27 39 4, 16, 26, 27, 39 39 5, 8, 16, 28 17 8, 16, 42,54, 56 5, 8, 29 5, 14, 26 DXLOOM-AUX DXLOOM-PM DXLOOM-SLM DX-MTX DX-PCMR DX-PMB DX-PMB2 DX-PMB2-S DX-REM32B DX-REM34B DX-REM35B DX-REM41D DX-REMG90 DX-REMG90A DX-REMG90T DX-REMG91 DX-REMG91S DX-RJM DX-RJM-HD DX-RJM-MINI DX-RJM-VIC-CCD DX-SKT-X4 DX-SLM DX-SNP DX-USB-COM GCK0011 GCK0014 GCN0309 GCN0691 GCN0781 GCN0787 GCN0788 GCN0791 GCN0793 GCN0794 GCN0795 GCN0796 GCN0978 GCN60325 GCN60326 GCN60327 GCN60323 GCN65128 GCN65129 GCN0791 GCN8002 GCN8004 GCN8005 GJS0003 GJS0022 GJS0029 GJS0031 GJS0033 GJS0040 GJS0044 GJS0055 GJS0066 GJS0090 GJS0091 GJS26819 GJS26826 GJS9983 GME64909 GME65146 GME65147 GME65326 GME65345 GME65347 GPC65329A GSM60180 GSM60182 GSM61190 GSM61191 GSM61191P GSM61192 GSM61192P 26, 37 25, 36 25 5, 8, 28, 29 5, 8, 28, 29 4,16, 25 4,16, 25 4,16, 25 5, 9, 10, 16,19 4, 9, 10, 16,18 5, 9, 10, 16,19 5, 9, 10, 16,18 4, 9, 10, 17,17 9, 10, 17 10, 17 4, 10, 16, 17 4, 10, 16, 17, 33 4, 8, 9, 16, 21 4, 8, 9, 16, 22 5, 8, 9, 16, 22 5, 8, 9, 16, 23 8, 16, 35 4, 16, 25 5, 8, 9,16, 24 29, 56 60 60 60 46 14, 36 36, 37 36, 37 36 14, 36, 37 14 37 37 46 14, 36, 46 14, 36, 46 14, 36, 46 12, 14 14 12, 14 36 14 46 46 60 60 60 60 60 60 60 60 60 60 60 60 60 60 36 14 14 14 14 14 14 36 36, 46 37 37, 45 45 37, 45 45 GSM63003 GSM63005 GSM63010 GSM63015 GSM63020 GSM63025 GSM63051 GSM63052 GSM63081 GSM65433 GSM80203 GSM80204 GSM80206 GSM80208 GSM80209 GSM80210 GSM80211 GSM80213 GSM80220 GSM80221 GSM80224 GSM80226 GSM80231 GSM80232 GSM80233 GSM80234 GSM80236 GSM80241 GSM80242 GSM80951 GSM9942 GSM9976 GSM9977 SW932662 SWLA70M SWLA70MB SWLA70MG SWLA70MR SWLA70MY SWTA5018 SWTA5020 SWTA5024 SWTA5026 SWTA5100 SWTA5710 SWTA5720 SWTA5730 SWTA5740 SWTA5750 SWTA5760 SWTA5808 SWTA9993 WHL90002 WHL90022 Wizard WMT90102 WMT90103 WMT90104 WMT90402 WMT90403 WMT90404 WMT90422 WMT90423 WMT90424 WMT90442 WMT90443 WMT90444 WMT90462 WMT90463 WMT90464 WMT90482 WMT90483 WMT90484 WMT90496 WMT90497 WMT90498 35 35 35 35 35 35 35 35 35 35 45 45 46 46 46 46 45 45 45 45 45 46 45 45 45 45 45 45 45 43 24 34 24 24 33 33 33 33 33 31 32 31 32 24 33 33 33 33 33 33 34 33 61 61 8,16,18, 42,54,55,56 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 NOTES 63 EUROPE ASIA AUSTRALASIA USA Ph: +44-1562-826-600 Ph: +886-955-335-243 Ph: +64-3-962-2519 Ph: +1-440-979-0657 Fax: +44-1562-824-694 Fax: +886 225-981-562 Fax: +64-3-962-2966 Fax: +1-440-979-1028 [email protected] [email protected] [email protected] [email protected] (CORPORATE OFFICE) Dynamic Controls is the world’s leading manufacturer of electronic controls for power wheelchairs and scooters. DYNAMIC CONTROLS was established in 1972 and is headquartered in New Zealand. Regional centres are located in Europe, United States, Asia, and Australasia. ISO 13485 certified – DYNAMIC CONTROLS goes above and beyond industry standard expectations to ensure customers receive the best products possible. www.dynamiccontrols.com DYNA_41915 Catalogue November 2009 Actual products may vary from those featured due to DYNAMIC CONTROL’S policy of continuous improvement. Not all products are available at the time of printing. Specifications may be subject to change. The DX system is TUV certified. All released DX2 modules are currently TUV certified.
