1
Download Model: PM5900
Transcript
BATTERY INSTALLATION CAUTION Use ONLY AA Alkaline Batteries 1. Press down the center, top edge of the battery cover and slide down. 2. Remove old batteries, if applicable. 3. Install 4 AA Alkaline Batteries, and follow the diagram stamped in the bottom of the battery compartment. 4. Slide the battery cover back into position until the cover snaps on to the Monitor. BATTERY INSTALLATION DIAGRAM OPERATING INSTRUCTIONS CAUTION Inspect the Oxygen Monitor, Sensor and Cable for visual damage before use, DO NOT USE if damaged. WARNING Read this User Manual before installing or operating the Oxygen Monitor. 9|Page
