Download straight leg swingarm frame for 4-speed twin

THE DRAG SPECIALTIES
NOVEMBER 2014
PAUGHCO We’ve mentioned it before - our long-time
partners at Paughco like to proclaim that theirs is the place where
‘Old School’ never went out of style. So get an early look here
at one of their latest offerings you will soon see in the upcoming
OldBook™. Ready for a Pan or Shovel 4-speed, right now is the
perfect time to get one of these frames into the hands of your
customers looking for a great winter project.
Contact your sales rep. today to learn more.
0501-0087
1301-0130
1302-0606
STRAIGHT LEG
SWINGARM FRAME
FOR 4-SPEED TWIN ENGINES
0214-0840
• Features a 30° neck rake, 0" backbone stretch and 0" downtube stretch
• Accepts Panhead or Shovelhead Engines and 1966-1984 4-speed
transmissions with chain final drive
• Mounts for pre-1984 Fat Bob gas tanks
• Standard width chrome swingarm accepts 130-series tires with chain final
drive (sold separately)
• Swingarm pivot bolt kit and rear axle kit are also available separately
• Made in the U.S.A.
NOTE: Wheel adjuster sets and fork cup kits are required but
available separately.
PART #
DESCRIPTION
FRAME
0501-0087
Straight leg swingarm frame
REQUIRED COMPONENTS
1301-0130
Chrome swingarm
1302-0606
Chrome swingarm pivot bolt kit
0214-0840
3/4" diameter rear axle kit
SUG. RETAIL
$
1,109.95
247.95
75.95
78.95
dragspecialties.com
THE DRAG SPECIALTIES
NOVEMBER 2014
Delmar
Raid
MACHINE OPS™ ONE-PIECE ALUMINUM WHEELS
• These forged wheels place the highest material strength in the same direction as the operating load,
creating a light and strong wheel
• Machine Ops™, RSD’s newest finish, is a fusion of textured natural aluminum and detailed machining
that exposes the true beauty of our aluminum alloy, then dip the fresh machined parts in a slick clear
anodize to protect the surface while keeping its raw aesthetic protected
• Feature a contour lip design for a graceful arc from spoke to tire
NOTE: For matching pulleys and rotors see
TRANSMISSION & DRIVELINE and BRAKES sections.
• Made in the U.S.A. by Performance Machine
DESCRIPTION
FRONT WHEELS
18" × 3.5" for 08-13 FLTR, FLHT, FLHR, FLHX w/ ABS
18" × 3.5" for 08-13 FLTR, FLHT, FLHR, FLHX w/o ABS
18" × 3.5" 08-14 FLSTF w/o ABS
19" × 2.15" for 08-14 FXD w/o ABS
19" × 2.15" for 08-14 XL w/o ABS
19" × 3" for 08-13 FLTR, FLHT, FLHR, FLHX w/o ABS
21" × 2.15" for 11-13 FXS w/ ABS
21" × 2.15" for 07-10 FXST/B/C, 11-13 FXS w/o ABS
21" × 3.5" for 14 FLHT, FLHR, FLHX w/ABS
21" × 3.5" for 14 FLHT, FLHR, FLHX w/o ABS
21" × 3.5" for 08-13 FLTR, FLHT, FLHR, FLHX w/ ABS
21" × 3.5" for 08-13 FLTR, FLHT, FLHR, FLHX w/o ABS
21" × 3.5" for 07-10 FXST/B/C, 11-13 FXS w/o ABS
23" × 3.5" for 08-13 FLTR, FLHT, FLHR, FLHX w/o ABS (dual disc)
23" × 3.5" for 08-13 FLTR, FLHT, FLHR, FLHX w/ ABS (dual disc)
23" × 3.5" for 08-13 FLTR, FLHT, FLHR, FLHX (single disc) w/o ABS
REAR WHEELS
18" × 4.25" for 11-13 FXS w/ ABS
18" × 4.25" for 11-13 FXS w/o ABS
18" × 4.25" for 08-14 XL w/o ABS
18" × 5.5" for 08-10 FXST/B/C, 08-14 FLSTF w/o ABS
18" × 5.5" for 08-14 FXD w/o ABS
1
Must be used with 17" or 18" rear wheels only.
2
NOTE; Front wheels listed for 14 Dresser models
accept 08-13 style rotor only (3.25" bolt circle).
DELMAR
RAID
0201-1937
0201-1927
0201-1949
0201-1939
0201-1941
0201-1929
0201-1951
0201-1945
0201-19311
0201-19211
0201-1932
0201-1922
0201-1947
0201-1925
0201-1935
0201-1943
0201-1938
0201-1928
0201-1950
0201-1940
0201-1942
0201-1930
0201-1952
0201-1946
0201-19331
0201-19231
0201-1934
0201-1924
0201-1948
0201-1926
0201-1936
0201-1944
0202-1947
0202-1941
0202-1949
0202-1943
0202-1945
0202-1948
0202-1942
0202-1950
0202-1944
0202-1946
PRICE LIST
PART #
0201-1921
0201-1922
0201-1923
0201-1924
0201-1925
0201-1926
0201-1927
0201-1928
0201-1929
0201-1930
0201-1931
0201-1932
0201-1933
0201-1934
0201-1935
0201-1936
0201-1937
0201-1938
0201-1939
0201-1940
0201-1941
SUG.
RETAIL
$
1,349.95
1,349.95
1,349.95
1,349.95
1,649.95
1,649.95
1,249.95
1,249.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,649.95
1,649.95
1,249.95
1,249.95
1,249.95
1,249.95
1,249.95
PART #
0201-1942
0201-1943
0201-1944
0201-1945
0201-1946
0201-1947
0201-1948
0201-1949
0201-1950
0201-1951
0201-1952
0202-1941
0202-1942
0202-1943
0202-1944
0202-1945
0202-1946
0202-1947
0202-1948
0202-1949
0202-1950
SUG.
RETAIL
$
1,249.95
1,649.95
1,649.95
1,349.95
1,349.95
1,349.95
1,349.95
1,249.95
1,249.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
1,349.95
TRUE DUAL FISHTAILS
• Feature 13/4" headpipes that flow
into 17 ⁄ 8" fishtail bodies
• Straight-through design
(no baffles)
• Chrome heat shields cover headers
• 07-15 models include 18mm O2
sensor ports w/ 12mm adaptors
• Length of fishtails are measured
from the slip fit connection to the
end of the fishtail
1800-1670
PART #
DESCRIPTION
FOR 07-15 SOFTAIL MODELS
1800-1669
True Duals w/ 30" fishtails
1800-1670
True Duals w/ 33" fishtails
1800-1671
True Duals w/ 36" fishtails
SUG. RETAIL
$
899.95
899.95
899.95
PART #
DESCRIPTION
FOR 89-06 SOFTAIL MODELS
1800-1666
True Duals w/ 30" fishtails
1800-1667
True Duals w/ 33" fishtails
1800-1668
True Duals w/ 36" fishtails
SUG. RETAIL
$
899.95
899.95
899.95
1861-0940
1861-0935
1861-0930
HEAT SHIELDS
• Protect your legs in style with investment-cast aluminum heat shields
• Available in a semi-polished aluminum or matte black electroplated finish
• The innovative cast aluminum mounts are coped perfectly for 13/4" exhausts, and
work with 2" (minor filing of mounts necessary) and 11/2" exhausts as well
• The included stainless steel hose clamps hold the
mounts in place on your exhaust, and the supplied
stainless steel screws mount your 6" or 12" heat
shield securely in place with no welding or
fabrication required
• In your choice of Finned, Fish Scale, or Smooth
• Sold each
PART #
FINNED
1861-0930
1861-0931
1861-0932
1861-0933
DESCRIPTION
12" polished
12" black
6" polished
6" black
SUG. RETAIL
$
99.95
99.95
74.95
74.95
PART #
SCALES
1861-0934
1861-0935
1861-0936
1861-0937
SMOOTH
1861-0938
1861-0939
1861-0940
1861-0941
DESCRIPTION
12" polished
12" black
6" polished
6" black
12" polished
12" black
6" polished
6" black
SUG. RETAIL
$
99.95
99.95
74.95
74.95
99.95
99.95
74.95
74.95
METALLIC EXHAUST PIPE WRAP KITS
• For maximum fuel burn or cosmetic upgrade
• Include 4 silver ladder tie clamps
• Withstand direct heat up to 2000°F
• Available in 1" × 50' or 2" × 25' sizes
PART #
1861-0975
DESCRIPTION
1" × 50'
SUG. RETAIL
$
73.95
• Made in the U.S.A.
PART #
1861-0976
DESCRIPTION
2" × 25'
SUG. RETAIL
59.95
DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD (“CARB”) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES
UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER’S INFORMATION.
3
THE DRAG SPECIALTIES
NOVEMBER 2014
CARL BROUHARD The Carl Brouhard name is where your
customers will find masterful creations that incorporate timeless styles and
classic designs to produce motorcycle parts worthy of the finest bikes. Carl
himself has described his work as “V-Twin Art In Motion,” and we at Drag
Specialties are proud to have all the latest offerings, like
the trims here, onboard and ready to go. Watch for them
all here and in your upcoming 2015 FatBook™.
2350-0266
3501-1012
2350-0270
WINDSHIELD TRIM
ELITE SERIES
SADDLEBAG HINGE COVERS
• Replaces stock windshield trim piece to create a custom look
• Constructed of 6061 T-6 aluminum
• Mounting hardware and instructions included
• Available in chrome or black-anodized with
re-machined accents
• Made in the U.S.A.
• Easy installation
• Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 14-15 FLHT/FLHR/FLHX/FLTRX MODELS
$
278.95
3501-1013
Chrome
3501-1012
Black
278.95
• Made from 6061 aluminum
SUG.
PART #
DESCRIPTION
RETAIL
FOR 14-15 FLHT/FLHTC/FLHTCU/FLHX AND
H-D FL TRIKE MODELS
$
165.95
2350-0269
Cross, chrome
2350-0268
Cross, black
165.95
2350-0273
Elite, chrome
165.95
2350-0272
Elite, black
165.95
Smoke
REPLACEMENT HARLEYDAVIDSON WINDSHIELDS
• The 130 series windshields are exact
replacements for H-D Touring models
• Available in clear, smoke and dark
smoke finishes in several different sizes
• Made of tough 3 ⁄ 16" aircraft-quality
Lucite® acrylic for optically perfect vision
• Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 14-15 FLHT/FLHTC/FLHX AND FLHTCUTG
$
64.95
2310-0562
6" smoke
2310-0563
6" dark smoke
64.95
2310-0564
8"smoke
64.95
2310-0565
8" dark smoke
64.95
2310-0555
10" clear
60.95
2310-0558
10" smoke
64.95
2310-0559
10" dark smoke
64.95
2310-0556
13" clear
69.95
2310-0560
13" smoke
73.95
2310-0557
16" clear
77.95
2310-0561
16" smoke
82.95
4
Dark Smoke
SUG.
PART #
DESCRIPTION
RETAIL
FOR 96-13 FLHT/FLHTC/FLHTCU/FLHX AND
H-D FL TRIKE MODELS
$
165.95
2350-0267
Cross, chrome
2350-0266
Cross, black
165.95
2350-0271
Elite, chrome
165.95
2350-0270
Elite, black
165.95
ENGINE FAILURE
DETECTION SYSTEM
2212-0549
• Provides an early warning of catastrophic engine failure
• Monitors the presence of ferrous metal debris in engine oil
through a sensor in a special 1/2-20 stock Harley sized drain plug
• LED warning light attaches to handlebars and indicates
when metal particles in oil reach a level that could
indicate impending trouble
• Includes wiring harness; no cutting or splicing required
• Available for both 11/4" and 1" handlebars in chrome or black
FOR 93-15 FLHT AND 91-15 FXD MODELS
PART #
FOR 11/4" HANDLEBARS
2212-0548
2212-0549
FOR 1" HANDLEBARS
2212-0550
2212-0551
DESCRIPTION
SUG. RETAIL
195.95
206.95
Black
Chrome
$
Black
Chrome
195.95
206.95
SADDLEBAG LATCH AND HINGE RIVET TOOL
• Secures saddlebag latches and hinges with rivets while providing a clean
factory look
• For use with OEM# 90965-63 (5 ⁄ 16") and 90967-64 (1/4") rivets only
• Made in the U.S.A.
PART #
3850-0247
DESCRIPTION
Saddlebag latch and hinge rivet tool
SUG. RETAIL
$
190.95
3902-0168
3902-0169
0214-0838
PLUG-AND-PLAY
TRAILER WIRING KITS
LOCKDOWN AXLE KITS
• All kits include 6-pin Molex isolator, 15-amp fuse/fuse
holder, two butt connectors and ring terminal (no converter needed)
• Replaces weak OEM axle nut washer with
special slotted axle nut washer as well as
stronger swingarm end caps that have a
better fit into the swingarm
• PART # 3902-0168 has an 8-pin multi-lock plugs and also includes 4-wire,
48" harness with a flat 4-position connector
PART #
0214-0839
0214-0838
0214-0837
DESCRIPTION
SUG. RETAIL
For 84-01 FLHT,
$
80.95
84-00 FXR
For 85-86 FL/FX,
80.95
84-85 FXST, 84-04 XL
For 91-05 Dyna models
80.95
• PART # 3902-0169 also includes 4-wire, 48" harness with a flat
4-position connector
• Made in the U.S.A.
PART #
3902-0168
3902-0169
DESCRIPTION
For 97-13 FLT, FLHT, FLHR, 06-09 FLHX, 07-09 FLTR,
01 FLTRU, 97-15 FLSTC w/ 8-pin rear light plugs
For 10-13 FLHX, FLTRX w/ 6-pin Molex rear light plugs
SUG. RETAIL
$
119.95
119.95
5
THE DRAG SPECIALTIES
NOVEMBER 2014
KLOCK WERKS It won’t be long and you will have
your 2015 FatBook™ in hand. There you will find a host of new
products from the Klock team that expand upon current offerings
(to fit all the latest models) as well as all-new parts and accessories
that feature the special Klock Werks touch. It all rolls out of their
headquarters in the heartland of America via our
Drag Specialties warehouses. Get a jump on your
competition today and be ready for more shortly.
2330-0121
3501-1008
WFB 4" SADDLEBAG
EXTENSIONS
• Use to create the stretched smooth
look that Klock Werks baggers are
known for
2330-0122
3501-1009
FAIRING VENT SCREENS
• Fiberglass construction with
a gel-coat finish
• Accent the vent in the new 14-15 HD vented fairing with
Klock Werks Fairing Vent Screen
• Very easily bonded to any factory FL
model with hard saddlebags
• Available in Honeycomb and Round pattern mesh aluminum
• Wider lip for better adhesion to
new plastic saddlebags
• Fairing Vent Screen is easy-to-install, and adds a custom
touch to the front of your fairing
3501-1010
• Styles available for hidden exhaust, 2-into-1 and dual style
• Vent screen may even catch or stop larger bugs and other
road debris from entering through your fairing vent
• Made in the U.S.A.
• Installation instructions and mounting adhesive included
PART #
DESCRIPTION
FOR 14-15 FLHT, FLHR, FLHX, FLTR MODELS
3501-1009
Fullback, for hidden exhaust (with short mufflers)
3501-1008
Halfback, for 2-into-1 exhaust
3501-1010
Double Cut, for dual exhaust
SUG. RETAIL
$
299.95
299.95
299.95
• Made in the U.S.A.
PART #
DESCRIPTION
FOR 14-15 FLHT, FLHX MODELS
2330-0121
Round
2330-0122
Honeycomb
SUG. RETAIL
$
49.95
49.95
1010-1596
STREET METAL™ AIR INTAKE SYSTEMS
1010-1597
• Developed around an over-sized K&N high-flow air filter that is
designed to boost performance, filtration and service intervals
• Aluminum backing plate with an integrated breather system
and velocity stack provides a solid mounting surface
• High-quality mirror-finish aluminum cover
• Made in the U.S.A.
PART #
DESCRIPTION
FOR 99-06 TWIN CAM W/ CV CARB, 01-15 TWIN CAM
W/ DELPHI EFI (EXCEPT 08-15 DRESSERS)
1010-1596
Weld
1010-1597
Torch
SUG. RETAIL
$
491.95
567.95
1010-1598
PART #
DESCRIPTION
FOR 91-06 XL 1200 W/ OEM CV CARB
1010-1598
Grind
SUG. RETAIL
$
370.95
DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD (“CARB”) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES
UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER’S INFORMATION.
6
1401-0463
BAGGER-TAIL REAR FENDER KITS
• Provide custom look while filling the gaps between fender and saddlebags
• Extended to match length of most stretched saddlebags
• Constructed from high-quality composite materials
• Jig-drilled for a perfect fit every time
• Kits include rear fender, hidden steel fender brackets and flexible hidden antennae
PART #
1401-0464
1401-0463
DESCRIPTION
For 09-15 FLHT/FLHR/FLHX/FLTRX
For 97-08 FLHT/FLHR/FLHX/FLTR
SUG. RETAIL
$
599.95
599.95
BRAKE ARMS
• Carved from billet aluminum
and available either chromeplated or black anodized
• Available in Deep Cut, and
Radius styles in standard and
EZ lengths; standard length is
1" longer than stock; EZ length
is 1" shorter than stock
• Matching brake peg included
• Perfect match for Ness
heel-toe shifter kits
• Made in the U.S.A.
1610-0411
1610-0425
PART #
DESCRIPTION
FOR 14-15 FLHT, FLHR, FLHX, FLHTCUTG AND FLRT
1610-0411
Radius, black
1610-0429
Deep Cut EZ, chrome
1610-0430
Deep Cut EZ, black
1610-0431
Radius EZ, chrome
1610-0432
Radius EZ, black
FOR 08-13 FLT AND H-D FL TRIKE
1610-0415
Deep Cut, chrome
1610-0416
Radius, chrome
1610-0409
Radius, black
1610-0425
Deep Cut EZ, chrome
1610-0426
Deep Cut EZ, black
1610-0427
Radius EZ, chrome
1610-0428
Radius EZ, black
1610-0420
SUG. RETAIL
199.95
249.95
249.95
199.95
199.95
$
249.95
199.95
199.95
229.95
229.95
199.95
199.95
PART #
FOR 97-07 FLT
1610-0414
1610-0408
1610-0417
1610-0418
1610-0419
1610-0420
FOR 00-15 FLST
1610-0412
1610-0413
1610-0421
1610-0422
1610-0423
1610-0424
FOR 00-10 FXST
1610-0410
1610-0412
1610-0410
DESCRIPTION
Radius, chrome
Radius, black
Deep Cut EZ, chrome
Deep Cut EZ, black
Radius EZ, chrome
Radius EZ, black
SUG. RETAIL
199.95
199.95
249.95
249.95
199.95
199.95
$
Radius, chrome
Radius, black
Deep Cut EZ, chrome
Deep Cut EZ, black
Radius EZ, chrome
Radius EZ, black
199.95
199.95
279.95
279.95
229.95
229.95
Deep Cut, black
279.95
FRONT FENDER RELOCATION BRACKETS
• Properly locates stock front fender on 14-15 Dresser models
• Designed to work with a 21" × 3.5" wheel
• Steel construction
• Sold in pairs
PART #
1401-0465
DESCRIPTION
For 14-15 FLHT/FLHX/FLHR/FLTR models
SUG. RETAIL
$
29.95
7
THE DRAG SPECIALTIES
NOVEMBER 2014
ALLOY ART Robbie Lane once explained the Alloy Art mission as a combination of, “Quality,
simplicity, fit, and function.” Their all new Universal fit Brake/Clutch Fluid Reserviors that you see here
are just such an example. These reservoirs feature a timeless look and style that has been captured
using the finest in modern materials and craftsmanship to produce one-of-a-kind pieces that are perfect
for your customers working towards that popular retro vibe.
0610-0848
UNIVERSAL
BRAKE/CLUTCH
FLUID RESERVOIRS
0933-0106
0610-0850
• Injection-molded clear tanks
• CNC-machined aluminum end caps
GOODEN-TITE ISO
FRONT MOTOR MOUNTS
• Tanks come in two sizes: small and large
• Available with raw machined or black anodized caps
PART #
LARGE RESERVOIR
0610-0848
0610-0849
SMALL RESERVOIR
0610-0850
0610-0851
DESCRIPTION
SUG. RETAIL
Raw finish
Black anodized finish
Raw finish
Black anodized finish
$
90.95
99.95
90.95
99.95
• CNC-machined aluminum base plate with
cast high-performance polyurethane isolator bushings
• Made in the U.S.A.
PART #
DESCRIPTION
FOR 80-08 FLT AND FXR MODELS; REPL. OEM #16207-79B
0933-0106
Machined finish
0933-0107
Black anodized finish
SUG. RETAIL
$
96.95
105.95
THUNDERMAX ECM WITH INTEGRAL AUTO TUNE SYSTEM
• ThunderMax ECM with Auto-Tune module mounts conveniently in place of the
factory ECM and plugs in to the existing harness
1020-2360
• Utilizes wide band O2 sensors and works as a closed-loop control system to
continuously self-adjust and properly tune the motorcycles air/fuel ratio for all
riding conditions
• Easy installation: replace the factory ECM, install new O2 sensors and harness,
load the correct map for your bike, and ride
1020-2361
• Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two
wide-band sensors, TMax software and communication USB cable, Quick-Start
Easy Install and Comprehensive User’s Manual, technical support and free
software and updates
1020-2359
• Hundreds of maps available to download for your bike (based on model,
engine size, exhaust system air cleaner, pistons, cams, etc.) – load
MANUFACTURER’S NOTE: Because of possible
the map of your choice and the integral auto-tune will do the rest
clearance issues, some aftermarket exhaust systems
• Improves throttle response, exhaust sound and driveability
may require modifications or relocation
of their O2 sensor port bungs.
• Does not require dyno tuning
• Rider can adjust idle speed, rev limit and speedometer calibration
• Adjustable front and rear cylinder AFR maps, ignition timing (spark)
maps, and startup maps
• Works with all popular exhaust systems and is compatible with highperformance camshafts
• Supports nitrous and supercharger applications
• Software program allows live monitoring, recording and examination
of diagnostic codes and datalogs including number of starts, engine
temperature and rpm operation
• New maps, software, firmware updates, map analysis and tech
support available online at no charge
• Made in the U.S.A.
MANUFACTURER’S NOTE: Legal in California only for racing vehicles which may never
be used upon a highway. Some products may not be legal for sale or use on pollutioncontrolled vehicles; check your local laws and the manufacturer’s information.
PART #
DESCRIPTION
SUG. RETAIL
For 12-14 FXS/FLS/FLST models, 12-14 FXD/FLD/FXDWG
$
899.95
1020-2360
models and 14-15 XL models
For 08-10 FXCW/C, 04-11 FXD/FXDWG, 09 SE Softail, 10-13 XL
1020-2361
919.95
models and 08-12 XR1200/X (inlcudes mini USB pigtail)
For 11-13 FLSTSE CVO models w/ electronic throttle control
1020-2359
999.95
(inlcudes mini USB pigtail)
1020-2382 For 15 XG500/750 models
899.95
1
NOTE: Will require the use of an exhaust system with 18mm sensor bungs or
headpipes must be modified to accept 18mm sensors.
DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD (“CARB”) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES
UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER’S INFORMATION.
8
0803-0461
0803-0462
CHAMPION SEATS
• Offers more padding than the Challenger seat for Dynas
• Vacuum-formed ABS plastic pan with injection-molded,
closed-cell polyurethane foam padding
• Hand-stitched, heavy-duty vinyl cover is available in two styles:
vertical or horizontal tuck n’ roll
• Chrome-plated tail bracket fits stock H-D mounting points on most stock and
select aftermarket fenders
PART #
FOR 06-15 DYNA GLIDE
0803-0461
0803-0462
DESCRIPTION
SUG. RETAIL
Vertical tuck n’ roll
Horizontal tuck n’ roll
$
199.95
199.95
ATLAS SEAT
• Offers a clean, lean alternative for older Dynas
• Vacuum-formed ABS plastic pan with injection-molded, closed-cell polyurethane
foam padding
• Hand-stitched, heavy-duty vinyl cover is available in diamond style
• Chrome-plated tail bracket fits stock H-D mounting points on most stock and
select aftermarket fenders
PART #
FOR 93-05 DYNA GLIDE
0803-0468
0640-0868
DESCRIPTION
Diamond
$
249.95
0640-0871
SPEED FREAK FORK
SLIDER COVERS
MIRRORS
• Add a set of these and have the most
radical front fork in town
• All mirrors are machined from 6061-T6 aluminum
and available in a chrome plated or black anodized finish
• Each hand-assembled custom mirror features Paul’s unique invisible mirror
tensioners, so there are no ugly tension adjusting screws to mess up the clean
look of your mirrors
• CNC-machined from a solid
block of 6061 T-6 aluminum
• Direct replacement, easy bolt-on application for all 84-15 H-D models
• Chrome-plated or black anodized
accent machined finish
0411-0100
• Bolt-on installation
• Includes two mirrors, two mirror arms and hardware
• Sold in pairs
• Sold as pair
PART #
0640-0868
0640-0869
0640-0870
0640-0871
SUG. RETAIL
DESCRIPTION
Double Trouble mirror, chrome
Double Trouble mirror, black anodized
Power mirror, chrome
Power mirror, black anodized
SUG. RETAIL
$
239.95
239.95
239.95
239.95
NOTE: 14-15 models require
PART # 2040-0600 for installation.
0411-0101
PART #
DESCRIPTION
FOR 86-15 FLT, FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE
0411-0100
Black
0411-0101
Chrome
SUG. RETAIL
$
431.95
431.95
9
THE DRAG SPECIALTIES
NOVEMBER 2014
OUTER FAIRING SHELL
• Perfect replacement for a damaged or battered OEM outer fairing shell
• Manufactured from OEM-grade material with precision tooling
• Accept OEM inner fairing and components, as well as most aftermarket accessories
• Threaded brass inserts included for inner fairing installation
PART #
2330-0115
• Smooth outer surface requires minimal prep before painting
DESCRIPTION
For 96-13 FLHT/FLHTC/FLHTCU/FLHTK/FLHX
and H-D FL Trike models; repl. OEM #58236-96
SUG. RETAIL
$
324.95
BILLET AXLE CAPS
• Precision-machined from
aluminum for the perfect fit
• Firmly attach to the axle head
and nut with high-quality setscrews
0214-0830
0214-0831
• Available in chrome or black finish
• Sold in pairs
• Made in the U.S.A.
NOTE: Check rear axle head and nut size
before ordering to ensure proper fit.
PART #
DESCRIPTION
SUG. RETAIL
FRONT AXLE CAPS FOR 08-15 XL AND 09-12 XR1200 MODELS W/1.130"
AXLE HEAD AND 15 ⁄ 16" AXLE NUT (WRENCH SIZE)
$
59.95
0214-0830
Chrome
0214-0831
Black
47.95
REAR AXLE CAPS FOR 13-15 XL MODELS W/11 ⁄ 8" AXLE HEAD AND 36MM
AXLE NUT (WRENCH SIZE)
0214-0834
Chrome
73.95
0214-0835
Black
56.95
WELL NUTS
0214-0832
0214-0833
PART #
DESCRIPTION
SUG. RETAIL
REAR AXLE CAPS FOR 08-12 XL AND 09-12 XR1200 MODELS W/11 ⁄ 8" AXLE
HEAD AND 11/4" AXLE NUT (WRENCH SIZE)
$
71.95
0214-0832
Chrome
0214-0833
Black
56.95
2404-0543
• Available in four sizes
• Replace OEM parts
• Can also be used in custom applications
• Sold in 10-pk
PART #
2404-0543
2404-0544
10
DESCRIPTION
6-32 bolt size; repl. OEM # 5210
10-24 bolt size; repl. OEM # 8098
SUG. RETAIL
$
13.95
14.95
PART #
2404-0545
2404-0546
DESCRIPTION
10-32 bolt size; repl. OEM # 5027
1/4"-20 bolt size; repl. OEM # 8099
SUG. RETAIL
$
14.95
15.95
1011-3219
PREMIUM REUSABLE AIR FILTERS
• Durable epoxy-coated wire mesh designed to maximize
airflow and provide peak filtration
1011-3218
• 100% reusable and washable
• Pre-oiled for quick, easy installation
• High-flow four-layer surgical-grade cotton filtration
• Urethane body won’t crack or curl like rubber
• Precision hand-poured design
• Made in the U.S.A.
MODEL
FOR BIG TWIN
For 14-15 FLHT/FLHR/FLHX/H-D FL Trike
For 12-15 FLS, 11-13 FXS, 08-11 FLSTSB, 13-15 FXDB
DRAG SPECIALTIES #
K&N REF. #
OEM #
SUG. RETAIL
1011-3218
1011-3219
HD-1611
29400045
29314-08
$
68.95
68.95
OEM STYLE REPLACEMENT
AIR FILTER ELEMENTS
• High-quality paper filter medium
• Meet or exceed OEM specifications
1011-3177
• For use with OEM stock air filter housings
NOTE: Not for use with Screamin’
Eagle air cleaners.
PART #
1011-3178
1011-3179
1011-3177
DESCRIPTION
For 14-15 FLHT, FLHR, FLTR, FLHX and
H-D FL Trikes; repl. OEM #29400045
For 13-15 FXDB, 12-15 FLS, 11-13 FXS,
08-11 FLSTSB models; repl. OEM #29314-08
For 14-15 XL models; repl. OEM #29400015
SUG. RETAIL
$
26.95
1011-3179
26.95
1011-3178
26.95
O-RING SERVICE KIT
FOR EFI FUEL LINES
• Replacement O-ring service kit
includes O-rings to service all of
the Drag Specialties EFI Fuel Lines
• Include all O-rings necessary to
service all internal and external fuel
lines on models with Delphi EFI
3501-0962
PART #
0706-0209
DESCRIPTION
Repl. O-ring service kit
SUG. RETAIL
$
7.95
3501-0963
SADDLEBAG HINGE INSERTS
• Aluminum construction with chrome-plated or
black powdercoat finish
FRONT MASTER
CYLINDER REBUILD KITS
• Add to the custom touch
• Replace red reflectors on stock hinges
• Meet or exceed OEM specifications
• Sold in pairs
PART #
DESCRIPTION
FOR 14-15 FLHT, FLHR, FLHX, FLTRX MODELS
3501-0962
Chrome
3501-0963
Black powdercoat
SUG. RETAIL
$
32.95
32.95
PART #
1731-0415
1731-0416
1731-0415
DESCRIPTION
For 07-13 XL single disc models, Master
Cylinder, 7 ⁄ 16" bore; repl. OEM #42803-07
For 07-13 XL dual disc models, Master
Cylinder, 1/2" bore; repl. OEM #42809-07
1731-0416
SUG. RETAIL
$
16.95
16.95
11
THE DRAG SPECIALTIES
NOVEMBER 2014
JOKER MACHINE Geoff Arnold and the crew at Joker Machine have been
busy creating new products designed to enhance functionality, style and performance. With
experience in almost every aspect of the two-wheeled world they bring their broad view of
what custom really is to your American V-Twin riders. We’ve chosen a range of their latest
products to present here so that you can get them into your shop before your
customers come calling for them. Watch for more in your 2015 FatBook™.
1610-0433
BRAKE PEDAL
1621-0631
1610-0434
• Fully CNC-machined from
solid 6061 T-6 billet aluminum
• Super-strong yet very lightweight
1621-0630
SERRATED FLOORBOARDS
• Serrated foot area gives good “bite”
to the bottom of the boot
• CNC-machined from solid 6061 T-6 aluminum
• Measures 2.75" L × 4.5" W; .75" thick
• Super-strong yet very lightweight design
• Sold each
• Comfortable serrated foot surface area gives good “bite” to the bottom of the boot
• Exclusive pitch adjustment allows you to change the angle of the floorboard so it
sits in a “level” riding position
• Installs with stock mounting hardware
• Measure 13.5" L × 4.75" W
PART #
DESCRIPTION
FOR 84-15 FLHT/FLHR/FLTR/FLHX AND H-D TRIKE,
86-15 FLST MODELS AND 14-15 FLD
1610-0433
Raw aluminum
1610-0434
Black anodized
SUG. RETAIL
$
64.95
64.95
• Sold in pairs
• Made in the U.S.A.
PART #
DESCRIPTION
FOR 84-15 FLHT/FLHR/FLHX/FLTR, 09-13 H-D FL TRIKE,
86-15 FLST AND 12-15 FLD
1621-0630
Raw aluminum
1621-0631
Black anodized
SUG. RETAIL
$
429.95
429.95
0610-0843
0610-0844
0610-0845
0610-0846
0602-0721
PULLBACK
HANDLEBAR RISERS
0602-0722
FRONT BRAKE MASTER CYLINDER COVERS
• Fully CNC-machined out of solid 6061
T-6 billet aluminum for maximum strength
• Fully CNC-machined from 6061 T-6 with styling that gives your bike
a road-racer look
• Special alloy gold zinc clamp bolts included
• Available in your choice of hard black anodized or a chrome-plated finish
• Have a 21/2" rise with 11/2" pullback
• Black anodized covers machined with high-brilliance diamond face cut technique
• Machined cutouts make these risers extremely
lightweight without sacrificing strength
• Gold alloy socket head hardware is included
• Made in the U.S.A.
• Made for use with 1" diameter handlebars
• Bases are threaded for 1/2"-13 riser bolts
• Sold in pairs
• Made in the U.S.A.
PART #
0602-0721
0602-0722
0602-0723
12
0602-0723
DESCRIPTION
Black anodized
Chrome-plated
Clear anodized
9901-1519
SUG. RETAIL
$
159.95
169.95
159.95
PART #
DESCRIPTION
FOR 08-15 FLHT/FLHR/FLTR/FLHX AND 09-13 H-D FL TRIKE
0610-0842
Finned, chrome
0610-0843
Finned, black anodized
0610-0844
Joker, black anodized
0610-0845
Joker, chrome
0610-0846
Smooth, anodized black
0610-0847
Smooth, chrome
SUG. RETAIL
$
44.95
44.95
44.95
44.95
44.95
44.95