Transcript
RONDA startech – Movement Cal. 5040.E & 5040.D 30 You have decided to buy a watch, which was assembled by a watchmaker using a Ronda movement. Please note that no watches are produced or distributed under the Ronda Brand. 20 45 10 6 235 4 Stop: to stop the timing, press 2 3 B 20 45 10 30 9 10 1 6 30 235 4 2 3 MO 45 15 6 23 5 235 4 4 2 3 Stop: (e.g. 15 min 5 sec following ) 2 3 Restart:(timing is resumed) 30 20 ⁄10 second counter 8 7 Date 01 45 15 6 23 5 4 2 3 Setting the time 30 20 60 MO 45 10 8 7 15 6 235 2 3 4 II time 8:45. MO 45 8 7 6 23 5 I 2 3 4 II III B 02 20 MO 8 7 60 45 10 6 30 315 4 I 45 appears. 6 15 4 I 2 3 II B 03 60 MO 45 15 Please note * Following , further intervals or intermediates can be displayed by pressing push-button B (display interval / make up measured time, ...). 30 9 10 1 6 23 5 4 2 3 B Adjusting the chronograph hands to zero position 30 60 MO 45 10 8 7 1 15 30 9 10 1 6 235 4 I 2 3 II III 30 20 (all chronograph hands are in their correct or incorrect zero position). 45 8 7 Keep push-buttons A and B depressed simultaneously for at least 2 seconds 65,5% = 40mm Druchmesser (the second counter hand rotates by 60 MO 10 15 360° corrective mode is activated). 65,5% = 40mm Druchmesser III 65,5% = 40mm Druchmesser 23 65,5% = 40mm Druchmesser B 30 9 10 1 6 Example: One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). Pull out the crown to position III B A Please note The date can be changed during the date changing phase between approx. 9:00 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case the automatic date changing does not occur at midnight. 15 B Push the crown back into position I. 30 9 10 1 2 3 A II Turn the crown until the correct date 60 MO 4 07 20 2 3 235 10 8 7 continues to run). 15 B 10 8 7 20 Pull out the crown to position II (the watch A 20 30 30 9 10 1 6 Setting the date (quick mode) A 30 Example: Start: (start timing) Display interval: e.g. 20 minutes 17 seconds (timing continues in the background) * Making up the measured time: (The chronograph hands are quickly advanced to the ongoing measured time.) Stop: (Final time is displayed) Reset: The chronograph hands are returned to their zero position 15 30 A Please note * In order to set the time to the exact second, must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set, must be pushed back into position I at the exact second. 15 30 9 10 1 45 9 10 1 *Push the crown back into position I. 60 10 8 7 Turn the crown until you reach the correct B 60 MO 10 III A 30 20 30 (the watch stops). 20 I Chronograph: Intermediate or interval timing A *Pull out the crown to position III 30 9 10 1 B 06 Please note * Following , the accumulation of the timing can be continued by pressing push-button A (Restart / Stop, Restart / Stop, …). 30 9 10 1 (e.g. 5 min 12 sec following ) = 20 min 17 sec (The accumulated measured time is shown) Reset: The chronograph hands are returned to their zero positions. 60 MO 10 (hour counter after 30 minutes) A *Stop: B A Push-button B Chronograph: Accumulated timing Example: Start: (start timing) 15 30 Crown 30 9 10 1 6 60 10 Minute counter 1 45 9 10 1 Push-button A 8 7 60 MO 8 7 Minute hand Second counter B 10 Second hand 20 Press push-button B. (The chronograph hands will be reset to their zero positions.) 15 A 20 push-button A once more and read the chronograph counters: 4 min / 38 sek / 7⁄10 sec Zero positioning: 60 MO 8 7 Control buttons Hour hand A 30 Description of the display and control buttons 30 Example: Start: Press push-button A. 15 30 9 10 1 05 Weekday (Start / Stop / Reset) 60 MO 8 7 In case of repairs, guarantee claims and questions concerning the functioning of a watch, purchasers and consumers should contact their retailer or the watch manufacturer, for which the relevant information can be found in the sales or guarantee documentation provided with the watch. Display elements Chronograph: Basic function A User’s Manual English 5 4 2 3 65,5% = 40mm Druchmesser 65,5% = 40mm Druchmesser 30 20 45 10 8 7 6 17 5 4 I 2 3 II III Pull out the crown to position III B 30 45 8 7 6 22 5 4 I 2 3 II 20 TH 45 8 7 6 235 4 III A A III 1 x short long Adjusting the next hand B III Adjusting the A Single step Continuous A hand (position 9h) 1 x short long II III III Termination of the chronograph hands adjustment (can be carried out at any time). * Pull out the crown to position III (the watch stops). Turn the rown until the correct date 23 15 and weekday I 2 3 10 III position I Returning the crown to I 30 9 10 1 Single step Continuous 08 60 10 A appears. B III III minute III counter appears 22 . III A 30 B Turn the rown until yesterday’s date 15 30 9 10 1 III III Push the crown to position II. 60 WE 10 (the watch stops). WE 1 A 65,5% = 40mm Druchmesser Turn the rown until yesterday’s weekday A 20 III Example: – Date / time on the watch: 17 / 01:25 / MO – Present date / time: 23 / 20:35 / TH 15 30 9 10 1 Adjusting the second counter hand A 1 x short Single step A long Continuous III Adjusting the next hand B 65,5% = 40mm Druchmesser B 65,5% = 40mm Druchmesser III Adjusting the ⁄ second counter hand (position 6h) 60 MO A Setting the date, weekday and time A II III TH appears. **Continue to turn the crown,until the B correct time 8:35 PM appears. Push the crown back into position I. A 30 20 04 45 10 8 7 9 10 1 6 235 60 TH 4 15 30 I 2 3 B II III Please note *To set your watch to the exact second, please refer to the chapter entitled «setting the time». ** Please observe the AM/PM clock rhythm. 06 / 2014 Battery type: 395 (diameter 9.5 mm x 2.6 mm / SR 927 SW) Accuracy: +20 / -10 seconds per month