Download 64PXL Board RGB User Manual v0.3

2 colors
PANTONE BLACK 7C
PANTONE 400 M
USER MANUAL
64PXL BOARD RGB
Please check for the latest updates and changes on the TRAXON website.
© 2008, 2009 TRAXON TECHNOLOGIES ALL RIGHTS RESERVED.
WWW.TRAXONTECHNOLOGIES.COM
H O N G
K O N G
N E W
Y O R K
P A R I S
T O K Y O
F R A N K F U R T
B I R M I N G H A M
R O T T E R D A M
3/09 V0.3
CONTENTS
1. INTRODUCTION ..................................................................1
2. PACKING CONTENTS ........................................................2
3. SAFETY AND OPERATION .................................................3
4. MOUNTING .........................................................................4
5. SYSTEM CONFIGURATION ................................................6
5.1 TX CONNECT SYSTEM ................................................6
5.2 SYSTEM CONNECTION ...............................................6
5.3 CONNECTING BETWEEN FIXTURES ............................8
5.4 LED CONTROL .............................................................8
6. CARE AND MAINTENANCE ..............................................9
7. TECHNICAL SPECIFICATION ...........................................10
8. WARRANTY STATEMENT .................................................10
1 colors
PANTONE BLACK M
FOR YOUR OWN SAFETY AND THAT OF THE PRODUCT, PLEASE READ THIS USER
DIMENSIONS
MANUAL CAREFULLY BEFORE BEGINNING SETUP AND INSTALLATION.
240mm/9.45”
16.00mm/0.63”
222mm/8.74”
64PXL MODULE XR RGB (MB.MO.7214100)
222mm/8.74”
240mm/9.45”
1. INTRODUCTION
64PXL BOARD RGB (MB.BO.7214000)
31.25mm/1.23” (typ.)
OR WEARING ANTISTATIC WRIST STRAP.
125mm/4.92” (2x)
CAUTION: DO NOT OPEN OR HANDLE EXCEPT AT A STATIC FREE WORKSTATION
4.32mm/0.17”
31.25mm/1.23” (typ.)
180mm/7.09” (2x)
The Traxon™ 64PXL Board RGB features 64 ultra bright RGB SMD LEDs on a 8 x 8
matrix with a 31.25mm/1.23” pitch. Although the LEDs provide ultra brightness, high
resolution videos and graphic replays can be created by combining multiple boards.
The 64PXL Board is DMX compatible which allows daisy chaining with the Traxon TX
Connect™ system. On-board SMART CHIP™ technology with the powerful feature of
auto-addressing enables easy setup and installation.
2. PACKING CONTENTS
• 64 Ultra Bright RGB SMD LEDs
4 x Mounting Spacers
• TX Connect™ System
• DMX Control
1 x Board
1 x TX Connect Smart Interconnection Cable (30mm/11.82”)
4 x Mounting Screws
• Auto-Addressing
• SMART CHIP™ Technology
• Indoor Applications
1
2
1 colors
PANTONE BLACK M
3. SAFETY AND OPERATION
4. MOUNTING
CAUTION – UNPLUG THE POWER SUPPLY FROM THE MAINS POWER BEFORE
4.1 BOARD
CONNECTING ANY CABLES AS THIS CAN DAMAGE THE PRODUCTS.
To mount the Board, first fit the nylon spacers into the mounting holes from the rear of
the board. Then use the screws to firmly fasten the board to a flat surface. Careful not
to over-tighten the screws (see FIG 1).
CAUTION – AVOID LOOKING DIRECTLY INTO THE LED LIGHT SOURCE AT CLOSE
RANGE FOR YOUR OWN SAFETY.
FIG 1: Board Mounting
ANY PERSONS INSTALLING THIS PRODUCT SHOULD COMPLY WITH LOCAL
MOUNTING SPACER (4x)
STANDARDS AND REGULATIONS AND MUST BE QUALIFIED FOR THE HANDLING
SCREW (4x)
This product is designed for indoor use only.
125mm/4.92”
OF ELECTRICAL EQUIPMENT.
Ensure product operate within the ambient temperature range of 0°C to 50°C
(32°F to 122°F).
If the fixture has been subjected to drastic temperature variances, for example, following
transportation, do not connect the fixture until it has reached room temperature, as
moisture condensation may cause electric shock and product damages.
When installing the fixtures and system power supplies, please ensure they will not be
exposed to moisture and extreme heat (and direct sunlight for outdoor products).
Besides, keep a clean operating environment for the fixtures and system power supplies.
To keep a consistent LED pitch when mounting mulltiple boards, use the dimensions
shown in FIG 2.
Please study this User Manual thoroughly and check the latest Technical Specification
Sheets available from our website [www.traxontechnologies.com] before setup.
3
4
1 colors
PANTONE BLACK M
5. SYSTEM CONFIGURATION
FIG 2: Mounting Multiple Boards
30mm/1.81”
180mm/7.09”
70mm/2.76”
5.1 TX CONNECT SYSTEM
180mm/7.09”
The Traxon TX Connect System is a interconnection system that combines power and
DMX data on a single connector cable so that only one connection is required between
light fixtures. The Board uses TX Connect System for all interconnections. FIG 3 shows
some components for the TX Connect System:
57.5mm/2.26”
10mm/0.39”
31.25mm/1.23”
TX Connect Data Cable
Part No.:
DI.IC.0020000
DI.IC.0300000
DI.IC.1000000
31.25mm/1.23”
DI.IC.0100000
DI.IC.0500000
DI.IC.2000000
1m
5m
20m
Micro Server
Part No.: CS.MA.5000000
TX Connect Smart Power/Data Splitter Cable
Part No.: TI.IC.0000200 0.2m/7.78”
AC IN
125mm/4.92”
0.2m
3m
10m
DC OUT
31.25mm/1.23”
10mm/0.39”
125mm/4.92”
125mm/4.92”
FIG 3: TX Connect System Components
LED Engine Smart 100W Indoor
Part No.: PS.IA.0010000
TX Connect Smart Interconnection Cable
Part No.:
TI.IC.0008000
0.08m
TI.IC.0030000
0.3m
TI.IC.0060000
0.6m
TX Connect Smart Extension Cable
Part No.:
31.25mm/1.23”
TX Connect Smart
Power/Data Injector Box
TX Connect Smart
Data Extractor Box
TI.EC.0050000
0.5m
TI.EC.0100000
1m
TI.EC.0300000
3m
TI.EC.0500000
5m
Part No.: TI.ZI.0000100
Part No.: TI.DO.0000100
TI.EC.1000000
10m
31.25mm/1.23”
31.25mm/1.23”
5.2 SYSTEM CONNECTION
The fixtures are wired together in a daisy chain using the TX Connect Smart system
(see FIG 4).
5
6
1 colors
PANTONE BLACK M
5.3 CONNECTING BETWEEN FIXTURES
CAUTION: PLEASE ENSURE THAT THE POWER IS SWITCHED OFF WHEN THE
DATA CABLES ARE BEING CONNECTED. FAILURE TO DO SO WILL RESULT IN
DAMAGE TO THE PRODUCTS AND VOID THE PRODUCT WARRANTY.
POWER SUPPLY to last FIXTURE in chain.
CONTROLLER to first FIXTURE.
TX Connect Data Cable
(DI.IC.xxxxxxx)
CONTROLLER
Powered by LED Engine via TX Connect Data Cable
512 DMX Channels per output
A
Micro Server
(CS.MA.5000000)
C to D: 30 meters
A to B: 100 meters
CABLING LENGTHS
2x 64PXL BOARD RGB CAN BE DAISY CHAINED
ONE LED ENGINE SMART 100W INDOOR.
4x 64PXL BOARD RGB CAN BE POWERED BY
Back
POWER SUPPLY
C
100W Indoor
(PS.IA.0010000)
LED Engine Smart
TX Connect Smart
Power/Data Splitter Cable
(TI.ZI.0000200)
TX Connect Smart
Power/Data Injector Box
(TI.ZI.0000100)
Back
TX Connect Smart Interconnection Cable (TI.IC.xxxxxxx)
PER CONTROLLER OUTPUT (512 DMX CHANNELS).
D
(MB.BO.7214000)
B
64PXL Board RGB
FIG 4: 64PXL Board RGB System Connection Example
Use the TX Connect Smart Interconnection Cable to connect between boards (FIG 5).
Use the pre-installed cables to connect between Modules. For longer distances, use
existing cable together with a TX Connect Smart Extension Cable.
FIG 5: Connecting Fixtures
FIG 6: LED Positions on the Board
(1,1)
(2,1)
(3,1)
(4,1)
(5,1)
(6,1)
(7,1)
(8,1)
(1,2)
(2,2)
(3,2)
(4,2)
(5,2)
(6,2)
(7,2)
(8,2)
(1,3)
(2,3)
(3,3)
(4,3)
(5,3)
(6,3)
(7,3)
(8,3)
(1,4)
(2,4)
(3,4)
(4,4)
(5,4)
(6,4)
(7,4)
(8,4)
(1,5)
(2,5)
(3,5)
(4,5)
(5,5)
(6,5)
(7,5)
(8,5)
(1,6)
(2,6)
(3,6)
(4,6)
(5,6)
(6,6)
(7,6)
(8,6)
(1,7)
(2,7)
(3,7)
(4,7)
(5,7)
(6,7)
(7,7)
(8,7)
(1,8)
(2,8)
(3,8)
(4,8)
(5,8)
(6,8)
(7,8)
(8,8)
BOARD CONNECTION
5.4 LED CONTROL
The LEDs on the 64PXL Board RGB are controlled by DMX. The LED location and on
the Board and its DMX channel is shown in FIG 6 and the following table.
LED Dice
DMX Channel Number
R
192(n-1) + 24(x-1) + 3(y-1) + 1
G
192(n-1) + 24(x-1) + 3(y-1) + 2
B
192(n-1) + 24(x-1) + 3(y-1) + 3
Where: n is the Board position in the chain.
x is the LED horizontal position on the Board.
AC Power Cord
(PS.AC.xxxxxxx)
y is the LED vertical position on the Board.
7
POWER ON: The 64PXL Board RGB has an approximately one second initialization
period after power-on. During this period, the LEDs on the board may light up randomly.
This is normal behavior of the Board.
8
1 colors
PANTONE BLACK M
6. CARE AND MAINTENANCE
Traxon™ products are of superior design and quality and should be treated with
care. The recommendations below will help fulfill and warranty obligations and
gain good use and longevity from the products.
- Do not attempt or use the product(s) until you read and understand the installation instructions.
Failure to adhere to these instructions could result in serious injury or property damage.
- Do not use product(s) if cables are damaged.
- Do not use product(s) when wet or in wet area. Moisture can cause electric shock and damage to
product(s).
- Do not use product(s) in dirty and dusty environment.
- Do not use product(s) in extreme heat environment. Ensure there is sufficient airflow and use cool
air circulation if required.
- Do not drop, knock, or shake product(s). Rough handling can damage the electronics and void the
warranty.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean products. Wipe with
a damp cloth on housings and a dry cloth on electronics to remove dirt or dust.
- Do not use product(s) outdoors.
- Do not attempt to service or repair the product(s) unless done by an authorized service personnel.
Contact your the local Traxon™ office or distributor for details.
If the product is not working correctly, please contact your nearest authorized service
centre or Traxon Technologies office for assistance.
7. TECHNICAL SPECIFICATION
Color Range:
Light Source:
Source Life:
Beam Angle:
Power Input:
Power Consumption:
Operating Temperature:
9
16.7 million additive RGB colors with variable intensity
64 Ultra Bright SMD LED
50,000 hours under normal operating conditions
X: 110°, Y: 90°
24V DC
24W max.
0°C to 50°C (32°F to 122°F)
For use with TRAXON LED Engine Smart 100W Indoor (PS.IA.0010000) power unit.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
As with all electronic devices, LED output degrades over time - a term called lumen
depreciation. This also explains why it is nearly impossible to expect photometric
performances of two LED products with different service life spans to be the same. The
rate of LED degradation is a complex function of many factors such as operating
efficiency, duration of continuous operation, and operating conditions (e.g. ambient
temperature).
Because LEDs are semiconductor devices, their performances are subject to inherent
variability commonly found in semiconductor industry. To improve consistency in
performance across the same product. LED manufacturers “sort” LEDs into bins
according to different preset parameters, such as forward driving voltage, illumination,
etc. Whereas binning is a sorting function, it is not a correction process. Inherent
variability in the manufacturing process results always in different binning distributions
according to different production lots. Traxon uses automatically binned LEDs on its
products, thereby minimizing output variations within the model range.
8. WARRANTY STATEMENT
Traxon warrants its Products against material or workmanship defects for a period of
two (2) years from date of purchase, provided that the purchased items are used under
the conditions stated in this user manual.
Please refer to the Product Warranty section under www.traxontechnologies.com/terms
for warranty terms and conditions.
10