Download Mountz EZ-TorQ II User Manual

Menu Selections
Selecting Units
1. Select Units by highlighting and pressing Enter.
2. Use the Scroll Up or Down key to toggle through the Unit options.
3. Press Enter key to select a Units Setting.
Quick Test
Units
Mode
Setup
Filter
Note:
cN.m is also available but you must
scroll down.
lbf.in
lbf.ft
ozf.in
kgf.cm
kgf.m
N.m
Selecting Mode Options
1. Select Mode by highlighting and pressing Enter.
2. Use the Scroll Up or Down key to toggle through the Mode options.
3. Press Enter key to select a Mode Setting.
4. The Main (or reading screen) will display the value of the selected Mode.
Quick Test
Units
Track
Peak
Mode
Setup
Filter
Selecting Setup
1. Select Setup by highlighting and pressing Enter.
2. Use the Scroll Up or Down key to toggle through the Setup options.
3. Press Enter key to select a Setup Setting.
Quick Test
Units
Mode
Setup
Filter
Note:
Contrast, Langauge & Sleep Mode is
also available but you must scroll
down.
Backlight
Data Output
Clear Memory
Auto Clear
Tolerance
Direction
Page 6
Corporate Headquarters: 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com