Download iMC-S8 Betriebsanleitung

iMC-S8 – operating instruction
2 Scope of delivery
The stepper motor controller iMC-S8 is available in the following variants:
iMC-S8 (Part.-No. 383320 200x) as desk controller
stepper motor controller iMC-S8 with Core module as desk device with max.
four stepper motor power amplifiers MD28
main cable (protection contact plug, IEC-60320 power connector)
RS232-communication cable, 9-pin Sub-D (socket) to 9-pin Sub-D (plug)
Operating instruction
Programming software PALPC 2.1 (software version 2.1.5.1 or higher)
iMC-S8 (Part.-No. 383320 100x) as 19 inch plug-in controller
stepper motor controller iMC-S8 with Core module as 19 inch device with max.
four stepper motor power amplifiers MD28
main cable (protection contact plug, IEC-60320 power connector)
RS232-communication cable, 9-pin Sub-D (socket) to 9-pin Sub-D (plug)
Operating instruction
Programming software PALPC 2.1(software version 2.1.5.1 or higher)
page - 7