Transcript
LED Festoon Lamp Holder User Manual 1. This manual is applied to the following models only: SBH-210 2. Specification Dimension L 2 ¼” x W 5/8” x H ¾” (55x16x18 mm) Standard Base Festoon Color Black / White Compatible Lamp Type Xenon ( Max.10W ) or LED festoon lamps ( Max.1W ), length 1 ¾” （ 44 ± 1 mm） Mounting Track Used for WAC linear track systems Temperature rating Maximum operating temperature of the feed connector and fittings is 194ºF(90ºC). UL Listed Complies with UL-1574 3. Installation instruction • Lamping on this lamp holder has no polarity. Refer to drawings for detailed mounting ocedure. • Multiple Lamp holders can then be connected to linear track systems. • Be sure that the total lamp power load does not exceed the transformer’s power capacity. • Working ambient temperature: -4ºF − 122ºF(-20ºC − 50ºC). • The lamp working temperature is warm, please be cautious when uninstalling the lamps or lamp holders from the track. • The lamp and lamp holder are not waterproof and for indoor use only. Retain these instructions for future service and adjustments 44 Harbor Park Drive, Port Washington, NY 11050 Tel: (800) 526-2588 Fax (800) 526-2585 www.waclighting.com
