1
Download INSTRUCTION MANUAL
Transcript
IPS 248BT INSTRUCTION MANUAL ST IPS 248BT MODE MUTE CD/MP3/WMA PLAYER PTY 15 10 1 AF 11 21 TA 8 1 TOP RPT 3 4x60WATTS 13 23 ST 16 12 17 28 IPS 248BT MODE MUTE Car Stereo CD/CDR/CDRW/MP3/WMA Player with PLL MW/FM Stereo Radio Radio Data System with PTY USB / MMC / SD Card Input 2 7 5 6 14 9 20 22 24 25 26 27 Bluetooth Function in Mobile Phone 4 (1-6) Flip Down and Detachable Front Panel System CD/MP3/WMA PLAYER PTY AF TA RPT 4x60WATTS 1 TOP CD/MP3/WMA PLAYER 4x60WATTS LOCATION OF PARTS AND CONTROLS PTY 15 10 1 AF 11 21 TA 8 1 TOP RPT 3 13 23 ST 16 12 17 28 IPS 248BT MODE MUTE ST CD/MP3/WMA PLAYER 2 PTY AF TA 7 5 6 IPS 248BT 4x60WATTS MODE 1 TOP MUTE RPT 14 9 20 PTY 22 AF PLAYER 24CD/MP3/WMA 25 26 TA RPT 4 (1-6) 4x60WATTS 27 1 TOP 1. POWER ON/OFF ( ) 2. FUNCTION SELECT15BUTTON: SEEK/MASK 10 1 BASS/TREBLE/BALANCE/FADER/TA 11 21 8 3 16 12 13 23 DPI/RETUNE/AUDIO DSP/LOUDNESS/ESP/CD MULTI/SCROLL/BEEP/STEREO/ LOCAL/PAIRING 3. VOL UP/VOL DOWN FOR BASS/TREBLE/BALANCE/FADER/TA SEEK/MASK DPI/RETUNE/AUDIO DSP/LOUDNESS/ESP/CD MULTI/SCROLL/BEEP/STEREO/ ST IPS 248BT LOCAL/PAIRING 4. PRESET STATIONS (1,2,3,4,5,6) MODE MUTE 5. ‘AF’ function (ALTERNATIVE19FREQUENCIES) 18 6. ‘TA’ function (TRAFFIC ANNOUNCEMENT) 7. ‘PTY’ function (PROGRAM TYPE) CD/MP3/WMA PLAYER 4x60WATTS 8. STEREO/MONO BUTTON (ST) 9. DISPLAY BUTTON (DISP) 1 TOP PTY AF TA RPT 10.MODE BUTTON (MODE) 11.BAND BUTTON (BD) 12.AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN / CD TRACK/SEARCH BUTTON 2 7 5 6 14 9 20 22 24 25 2 13.AUTO SEEK SEARCH TUNING (A/PS) 14.‘SCAN’ AUTOMATIC TUNING CONTROL (SCN) 4 (1-6) 15.MUTE BUTTON (MUTE) 16.LCD DISPLAY 17.PANEL RELEASE BUTTON ( ) 18.CD SLOT 19.CD EJECT BUTTON ( ) 20.TOP BUTTON 21.PAUSE BUTTON 22.INTRO BUTTON (Preview all Tracks) 23.REPEAT BUTTON 24.RANDOM BUTTON 25, 26. + 10 TRACK SEARCH UP/DOWN 27.USB PORT 28.MULTI-MEDIA CARD (MMC) / SD CARD SLOT 19 18 ISO CONNECTOR RCA Jack Line Out RCA Jack Line In : Red (right) White (left) : Red (right) White (left) B 1 5 7 6 8 CONNECTOR A 1. 2. 5 7 3. 8 4. MEMORY +12V A 5. AUTO ANTENNA OUTPUT 6. 7. +12V (TO IGNITION KEY) 8. GROUND Note: (connector A no. 7) must be connected by car ignition key in order to avoid that car battery being drained when the car will be not used for long period. CONNECTOR B 1. REAR RIGHT SPEAKER (+) 2. REAR RIGHT SPEAKER (-) 3. FRONT RIGHT SPEAKER (+) 4. FRONT RIGHT SPEAKER (-) 5. FRONT LEFT SPEAKER (+) 6. FRONT LEFT SPEAKER (-) 7. REAR LEFT SPEAKER (+) 8. REAR LEFT SPEAKER (-) Maintenance FUSE REPLACEMENT If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the replacement, there may be an internal malfunction. In this case, consult your nearest repair center. Warning Use the specified amperage fuse for each lead. Use of a higher amperage fuse may cause serious damage. INSTALLATION PRECAUTIONS • Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration. • Use only the supplied mounting hardware for a safe and secure installation. 182mm • Be sure to remove the front panel before installing the unit. NOTE : Inclination angle for car radio installation must not 53mm exceed 30˚ otherwise the front panel will not open. screw and 11 release bracket 3 2 3 18mm 4 5mm 2 Bend these claws, if necessary Note: Keep the release key in a safe place as you may need it in the future to remove the unit from the car. TO SUPPORT THE UNIT Dashboard 1. UNIT 2. RELEASE CASE 3. DASH BOARD 4. HEX NUT 5. LOCK WASHER 6. PLAIN WASHER 7. CAR BODY 8. REAR SUPPORT STRAP 9. TAPPING SCREW 10.M5 X 15 HEX BOLT 6 5 8 10 7 5 1 9 6 Detaching and attaching the front panel The front panel of this unit can be detached in order to prevent the unit from being stolen. FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL Before detaching the front panel, be sure to press the PWR button (1) OFF first. Then press the button (17), let the Front Panel arrive in horizontal position and detach the panel by pulling it towards you as illustrated. not exceed 10° 1 Notes: • Do not press the front panel hard against the unit when attaching it. It can be easily attached by pressing it lightly against the unit. • When you carry the front panel with you, put it in the supplied front panel case. • Do not press hard or give excessive pressure to the display window of the front panel when attaching it to the unit. 1. POWER ON/OFF (PWR) By pressing this key, the unit is turned on or off. This unit is turned on by pressing any key. 2. FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/FADER / TA SEEK/MASK DPI/RETUNE/ AUDIO DSP/LOUDNESS/ESP/CD MULTI/BEEP/STEREO/LOCAL/PAIRING Turning the VOL knob Right or Left (3), you can adjust VOL/BASS/TREB/BAL/FAD. To select other functions, press the SEL (2) button shortly until the desired functions is shown on the display. Figure 1 shows how control functions are selected using the SEL button. 2 1 2 3 4 2 5 2 6 2 Fig. 1 Selection of sound control functions 1. VOL 2. SEL 3. BAS 4. TRE 5. BAL 6. FAD Turning the VOL knob Right or Left. Increase or decrease the volume by turning buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER. TA SEEK/TA ALARM (2) When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function. VOL or VOL VOL . TA SEEK Mode or TA ALARM mode is selected by VOL 2 sec. SEL TA SEEK VOL VOL VOL or VOL VOL . These TA SEEK / TA ALARM - TA 2 sec.SEEK mode: VOL When turned station doesDPI not receive TPDPI information TA SEEK MASK MASK / MASK ALL for 5 sec., the radio retunes to next station SEL newly SEL which has not the same station (PI) as the last station, but has the TP information. In2 TA sec. seek mode, the current station can be changed to the completely different station because the TA SEEK MASK DPI RETUNE RETUNE L / RETUNE S SELsearches SEL SEL strength unit TP station when the field of theVOLcurrent station is very weak, or the current station has no TP signal. - TA ALARM mode: 2 sec. Any automatic retune mode is not activated, just can hear Beep sound. TA SEEK MASK DPI DSP ON SEL SEL SEL RETUNE SEL 2 sec. VOL MASK (2) TA SEEK TA SEEK / TA ALARM SEL DPI VOL POP ---the ROCK --- CLASSIC --- FLAT --- DSP When press SEL button for more thanOFF 2 seconds, it is activated as selecting mode of these function. 2 sec. 2SEL sec. SEL TA SEEK TA SEEK SEL SEL MASK DPI MASK DPI VOL SEL MASK DPI / MASK ALL SEL RETUNE DSP SEL LOUD VOL ON/OFF 2 sec. DPI: masked only the AF which has different PI. MASK VOL 2SEL sec. TA SEEK MASK DPI RETUNE RETUNE L / RETUNE S SEL SEL MASK 2 sec. ALL: masked the AF which has different PI and NO RDS signal with field strength. RETUNE L / S CONTROLS (2) 2 sec. sec. 2 VOL When press button for more than 2 seconds, it SEL is activated as selecting Retune mode. 10SEEK /the ESP SEL 40 VOL TA SEEK TA ALARM SEL 2SEL sec. ESP TA MASK/DPI DSP ON SEL TA SEEK RETUNE SEL RETUNE L:SEEK Select 90 as the time automatic TA search. VOLinitial TA MASK DPI MASK DPI /of MASK ALL SEL SELseconds RETUNE S: Select 30 seconds as initial time. 2 2 sec. sec. SEL SEL VOL 2SEL sec. SEL SEL 2 sec. 2SEL sec. SEL TA SEEK TA SEEK SEL VOL MASK DPI SEL TA SEEK / TA ALARM RETUNE DSP SEL LOUD POP --- ROCK --- SEL CLASSICMASK --- FLAT --- DSP OFF RETUNE TA SEL DSP SEL SEL LOUD VOL TA SEEK SEEK MASK DPI DPI MASK DPI / MASK ALL SEL VOL TA SEEK MASK DPI RETUNE RETUNE L / RETUNE S SEL SEL MULT TA SEEK VOL SEL MULT ON/OFF MASK DPI SEL RETUNE SEL SEL ESP ESP SEL DSP SEL SEL SEL DSP SEL DSP SEL DSP ON SEL DSP SEL LOUD SEL DSP BEEP ON/OFF SEL LOUD SEL ESP SEL LOUD SEL ESP SEL LOUD VOL ON/OFF VOL TA SEEK MASK RETUNE RETUNE L / RETUNE S SEL SEL SEL AUDIO DSP CONTROLS (2) DPI 2 sec. When press the SEL button for more than 2 seconds, it is activated asON selecting mode of these function. 2 sec. TA SEEK MASK DPI DSP SEL SEL SEL RETUNE SEL 2 sec. TASEEK SEEK MASKDPI DPI SEL RETUNE SEL TA MASK SEL RETUNE SEL TA--SEEK DPI--- DSP SEL POP ROCK --- SEL CLASSICMASK --- FLAT OFF RETUNE VOL SCROLL SCROLL 1/2 SEL ESP MULT VOL 10 / ESP 40 SEL SEL 2SEL sec. SEL VOL VOL 2 sec. SEL 2SEL sec. POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF TA SEEK SEL MASK DPI SEL RETUNE LOUD LOUD SEL SEL VOL ESP ESP ON/OFF 2SEL sec. TA SEEK MASK ESP SEL SEL RETUNE DSP SEL SEL SEL LOUD LOUDNESS CONTROLS (2) DPI VOL TA SEEK DPI SEL SEL RETUNE DSP SEL 2SEL sec. LOUD ON/OFF When press the SELSEL buttonMASK for more than 2 seconds, it is activated as selecting mode of these function. SEL SEL 2 sec. TA SEEK MULT MULTI MASK DPI SEL RETUNEVOL SEL MULT ON/OFF SEL SEL BEEP SCROLL VOL SEL VOL ESPTA 10SEEK / ESP 40 SEL sec. 22sec. SEL SEL 2VOL sec. SEL TASEEK SEEK SEL TA SEL ESP 10 / ESP 40 TA SEEK SEL MASK DPI SEL RETUNE SEL DSP MASKDPI DPI MASK SEL SEL RETUNE SEL SEL DSP DSP SEL SEL LOUD LOUD SEL SEL ESP ESP MASK DPI SEL RETUNE SEL DSP SEL LOUD SEL ESP VOL RETUNE 2SEL sec. VOL SEL 2 sec. 2SEL sec. 2 sec. 2 sec. SEL SEL SEL 2 sec. VOL TA SEEK MASK DPI RETUNE RETUNE L / RETUNE S SEL SEL POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF VOL TA SEEK MASK DPI MASK DPI / MASK ALL SEL TA SEEK TA SEEK SEEK TA TA SEEK VOL SEL SEL SEL TA SEEK / TA ALARM MASK DPI DPI SEL MASK SEL MASK DPI SEL RETUNE RETUNE RETUNE DSP ON SEL SEL SEL DSP RETUNE L / RETUNE S LOUD ON/OFF VOL VOL VOL VOL OFF 2SEL sec. ON/OFF TA--SEEK MASK DPIby POP ROCK --- SEL CLASSIC --- FLAT --- DSP VOL VOL VOL VOL . DPI LOUD mode is selected orMASK The/ MASK bassALL and treble response will be boosted. 2SEL sec. SEL TA SEEK TA SEEK SEL SEL MASK DPI MASK DPI RETUNE RETUNE SEL SEL SEL SEL DSP SEL DSP ON LOUD SEL ESP SELSEL ESP ESP ON/OFF TA SEEK TA SEEK / TA ALARM 2SEL sec.MODE 2 sec. ESP (2) VOL TA SEEK DPI RETUNE RETUNE / RETUNE S or SEL SEL SEL MASK DPI than VOL SEL SEL RETUNE it isSEL DSPLas SEL 2 seconds, LOUD ON/OFF When press buttonMASK for more activated 12 sec. 45 sec.VOL of ESP mode ESPTA 10SEEK /the ESPSEL 40 SEL 2VOL sec. POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF can be selected. 2 sec. VOL VOL TA SEEK MASK DPI MASK DPI / MASK ALL SEL VOL TA SEEK TA SEEK / TA ALARM TA MASK SEL SEL RETUNE DSP LOUD SEL LOUD TA SEEK SEEK MASK DPI DPI DSP ON SEL SEL SEL RETUNE SEL TA SEEK MASK DPI SEL SEL SEL RETUNE DSP SEL LOUD VOL TA SEEK MASK DPI RETUNE RETUNE L / RETUNE S SEL SEL SEL VOL SEEK MASK DPI MASK DPI / MASK ALL SEL VOL VOL SEL MULT ESPTA 10 ESP 40 SEL VOL MULT ---/ ROCK --- CLASSIC ---ON/OFF FLAT --- DSP OFF 2 sec. POP SEL 2SEL sec. 2 sec. 2SEL sec. SEL 2 sec. 2SEL sec. VOL 2 sec. VOL TA SEEK TA SEEK / TA ALARM SEL LOUD SEL VOL TA SEEK DSPLON SEL SEL RETUNE SEL MASK DPI RETUNE RETUNE / RETUNE S LOUD SEL SEL TA MASK SEL SEL SEL RETUNE DSP SEL SEL TASEEK SEEK MASKDPI DPI SEL SEL RETUNE DSP SEL SEL LOUD 2SEL sec. TA SEEK MASK DPI SEL SEL SEL SEL RETUNE DSP SEL LOUD MULTI CD10SECTION (2) VOL / ESP 40 SELMODE VOL SEEK MASK DPI MASK DPI / MASK ALL SEL ESPTA When press the SEL button for more than 2 seconds, it is activated as selecting mode VOL POP --ROCK --CLASSIC --FLAT --DSP OFF VOL 2 sec. MULT ON/OFF SEL MULT VOL 2 SEL sec. SCROLL SCROLL 1/2 SEL MULT 2SEL 2 sec. sec. TA MASK DSP ON SEL SEL SEL RETUNE SEL TA SEEK SEEK MASK DPI DPI SEL SEL SEL RETUNE DSP LOUD SEL VOLSEL TA SEEK MASKDPI DPI SEL RETUNE DSP SEL SEL S LOUD TA SEEK MASK RETUNE RETUNE L / RETUNE SEL SEL SEL 2SEL sec. SEEK sec. MASK DPI sec.SEL SEL 10 TA SELfor CD, SEL RETUNE DSP 2 Note: sec./40 120 for MP3 automatically works. 2 sec. sec. 2 sec. 2SEL sec. TA SEEK MASK DPI SEL SEL VOL TA SEEK MASK DPI SEL SEL SEL POP --CLASSIC --- FLAT OFF VOL ESP 10 / ROCK ESP 40--- SEL TA SEEK MASK DPI--- DSP SEL SEL VOL MULT ON/OFF MULT 2SEL sec. 2 sec. 2SEL sec. TA SEEK SEL MASK DPI SCROLL RETUNE RETUNE RETUNE RETUNE SEL SCROLL 1/2 SEL SEL SEL SEL DSP DSP DSP SEL SEL SEL ESP SEL 2sec. sec. 2SEL ESP ESP ON/OFF SEL VOL SEL of these function. LOUD LOUD LOUD SEL SEL ESP ESP ON/OFF ESP ESP VOL SEL SEL DSP ON SEL SEL MULT TA SEEK SEL MASK DPI SEL SEL SEL SEL RETUNE DSP LOUD VOL VOL VOL SEL SEL multi ESP SEL ON/OFF MULTI BEEP SCROLL CD MULTI ON/OFF mode is selected by VOL or VOL . CD BEEP MULTI ON: Read sectionVOL CD. ON/OFF 2 sec. SEL TA SEEK MASK DPI LOUD SEL ESP SEL SEL SEL RETUNE DSP SEL LOUD CDSEL MULTI OFF: Read section TA SEEK DPI only. ESP SELfirst MASK SEL RETUNE DSP SEL SEL SEL LOUD VOL ON/OFF MULT TA SEEK VOL SEL MULT MASK DPI ESP SEL SEL RETUNE DSP SEL SEL SEL LOUD SCROLL MODE TA SEEK MASK DPI VOL SEL SEL SEL SCROLL SEL DSP SEL SEL LOUD LOUD SEL ESP SEL ESP SCROLLRETUNE 1/2 SEL MULT 2SEL sec. When these function. 2 sec. press the SEL button for more than 2 seconds, it is activated as selecting mode of VOL 2VOL sec. 2 sec. VOL POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF ESP 10 / ESP 40 TA SEEK MASK DPI SEL SEL SEL RETUNE DSP SEL LOUD ON/OFF BEEP MULTI TA SEEK SEL MASK DPI SEL ESP SEL SCROLL SEL ON/OFF RETUNEVOL DSP VOL SEL SEL BEEP SEL LOUD STEREO SEL STEREO/MONO ESPMULT 10 SEEK / ESP 40SEL TA MASK DPI SEL SELBEEPRETUNE ESP SEL SCROLL SEL DSP SEL SEL LOUD TA SEEK MASK DPI ESP SEL SEL RETUNE DSP SEL SEL SEL LOUD VOL TA SEEK MASK DPI ON/OFF SEL MULT SEL RETUNE DSP LOUD MULT SEL SEL ESP SEL 2 sec. 2SEL sec. VOL 2 SEL sec. SCROLLRETUNE 1/2 SEL MULT TA SEEK MASK ESP SEL SEL SCROLL SEL DSP SEL SEL SEL LOUD TA SEEK MASK DPI DPI ESP SEL SEL SEL RETUNE DSP SEL SEL SEL LOUD TA SEEK MASK DPI ESP SEL SEL RETUNE VOL SEL SEL SEL SEL LOUD BEEP DSP ON/OFF SEL SEL SEL MULTI BEEP SCROLL 2VOL sec. ESP 10 / ESP 40 SCROLL 1: Unit displays song details but no text scrolling. 2SEL sec. TA SEEK MASK DPI ESP SEL SEL SEL RETUNE DSPVOL STEREO/MONO SEL SEL LOUD VOL MULT BEEP STEREO SEL MULT SEL SCROLL ON/OFF SEL SEL SEL MULT SCROLL 2:SEEK Unit SCROLL displays song and scrolls the text information to the LOUD left. VOL MULT BEEP SEL SEL details LOCAL SEL LOCAL/DXSEL SEL STEREO SEL TASEL MASK DPI ESP SEL SEL RETUNE DSP 2SEL sec. SEL 2 sec. SEL 2SEL sec. SEL 2 sec. SEL VOL 2 sec. SEL TA SEEK SEL MASK DPI RETUNE SEL SEL DSP SEL LOUD ESP SEL TA SEEK MASK DPI VOL SEL ESP SEL SEL SEL RETUNE DSP SEL SEL LOUD SCROLL SCROLL 1/2 SEL MULT BEEP (2) SEL sec. MODE 22sec. VOL BEEP ON/OFF SEL SEL SELSEL MULTI BEEP SCROLL When the SEL button forDPI more activated as selecting mode of SEL these function. SEEK MASK DPI than ESP SEL SEL press SEL SEL DSP RETUNEit is DSP LOUD SEL TATA SEEK MASK ESP SEL SEL SEL RETUNE SEL 2 seconds, SELSELLOUD SEL SEL 2 sec. 2SEL sec. SEL MULT 2sec. sec. 2SEL SEL 2SEL sec. 2SEL sec. MULT MULT SEL VOL SCROLL MULT ON/OFF SEL BEEP STEREO SEL VOL STEREO/MONO VOL SEL TA SEEK MASK SEL SCROLL SEL SELESP SCROLL 1/2 SEL MULT LOCAL/DX BEEP SEL DPI LOCAL SELVOL PAIRING SEL DSP SEL LOUD STEREO SEL SCROLL SEL SEL RETUNE TA SEEK MASK DPI ESP SEL SEL RETUNE DSP SEL SEL SEL LOUD SEEK MASK ESP SEL SEL MASK SEL DSP RETUNE DSP SEL RETUNE SEL ESP SEL LOUD LOUD SEL TATA SEEK DPIDPI SEL SEL VOL SEL BEEP ON/OFF SEL SEL SEL MULTI BEEP SCROLL VOL TA SEEK DPIDPI SEL SEL RETUNE DSP SEL MULT STEREO SEL SEL SEL STEREO/MONO SCROLL TA SEEK MASK SEL MASK SEL RETUNE DSP SEL SEL BEEP SEL LOUD LOUD SELSEL ESPESP SEL VOL SCROLL 1/2STEREO SEL VOL pressed. ON:MULT BEEPSCROLL sound can from whenSEL the buttons BEEP SCROLL SELbe heard LOCAL are LOCAL/DX SEL SELspeaker SEL SEL SEL BEEP MULT BEEP ON/OFF SEL SEL SEL MULTI BEEP SCROLL 22 sec. STEREO/MONO (2) sec. TA SEEK MASK DPI ESP SEL SEL SEL RETUNE DSP SEL SEL SEL SEL LOUD TA MASK ESP SEL press SEL SEL RETUNE DSP SEL SEL SEL When the SEL button forDPI more activated modeSEL of these function. TASEEK SEEK MASK DPI than ESP SEL SEL RETUNE it is DSPas selecting SEL 2 seconds, SEL SEL LOUD LOUD 2 sec. MULT 2SEL sec. TASEL SEEK SCROLL SEL LOCAL SELSEL LOUD PAIRING DSP SEL SELESP 2SEL sec. VOL MULT BEEP STEREO SEL SEL SEL STEREO/MONO SCROLL VOL BEEP SEL SEL RETUNE SEL DPI LOCAL SEL LOCAL/DXSEL SEL DSP STEREO SEL TASEL SEEK SCROLL MASK SEL VOL BEEP SEL LOCAL PAIRING SEL SEL LOUD STEREO SCROLL SEL SEL BEEP ON/OFF SEL SEL MULTI BEEP SCROLL SELESP MULT SEL MULT SEL 2 sec. 2 sec. BEEP SEL SEL RETUNE SEL DPI STEREO VOL MASK SEL SEL TAMULT SEEK MASK DPI SEL RETUNE SEL SEL DSP VOL SEL SEL BEEP SEL LOUD STEREO SEL SEL STEREO/MONO SCROLL TA SEEK MASK DPI SEL SEL RETUNE DSP SEL SEL SEL LOUD TA SEEK MASK DPI SEL SEL SEL RETUNE DSP SEL SEL SEL LOUD When FM stations are weak and are disturbed, listening can be improved by selecting VOL BEEP SEL LOCAL LOCAL/DX SEL STEREO SCROLL SEL SEL 2MULT sec. MULT BEEP SEL LOCAL PAIRING SEL SEL STEREO SCROLL SEL SEL TAMULT SEEK MASK DPI SEL SEL SEL SCROLL RETUNESEL SEL DSP VOL SEL SEL BEEP SEL LOUD SEL STEREO SEL STEREO/MONO SEL SEL 2 sec. SEL SEL MONO. SEL ESP SEL LOCAL/DX (2) 2 sec. When the SEL button forDPI more than activated modeSEL of these function. TA SEEK MASK ESP SEL press SEL SEL RETUNE it is DSP as selecting SEL 2 seconds, SEL SEL LOUD MULT 2 sec. SEL 2MULT sec. SEL MULT ESP ESP ESP SEL SCROLL SEL BEEP TA SEEK MASK DPI SEL SEL BEEP SEL SCROLL SEL TA SEEK SEL SCROLL SEL SEL STEREO SEL RETUNE STEREO SEL SEL LOCAL DSP SEL LOCAL SEL VOL LOUD SEL LOCAL/DX ESP SEL SEL PAIRING SEL MASK DPI SEL RETUNE DSP SEL SEL SEL LOUD VOL BEEP SEL LOCAL LOCAL/DX SEL STEREO SEL ESP SEL BEEP signals SEL strong PAIRINGduring SEL atLOCAL SEL stations SELmanual SCROLL SEL SEL toSTEREO 2MULT sec. “Local” position in areas with let radio stop only strong TA SEEK MASK DPI SEL (LOC SEL Select SELwithDSP RETUNE SELposition SEL SEL LOUD tuning appears). Distant in areas weak signals to listenSEL to all ESP stations. MULT SEL SCROLL SEL BEEP SEL STEREO SEL LOCAL SEL PAIRING SEL 2 sec. SEL TA SEEK SEL MASK DPI SEL RETUNE SEL DSP SEL LOUD SEL ESP SEL PAIRING MODE (2) VOL MULT press BEEP than SEL LOCALas selecting LOCAL/DX SEL When SEL button for more 2 seconds, activated mode of these funcSTEREO it is SELthe SCROLL SEL tion. (Please refer to HOW TO PERFORM PAIRING on page 10) 2 sec. SEL MULT TA SEEK SEL SEL SCROLL MASK DPI SEL SEL BEEP RETUNE SEL STEREO SEL DSP SEL SEL LOCAL LOUD SEL SEL PAIRING ESP SEL SEL 4. PRESET STATIONS (1,2,3,4,5,6) (A) RADIO MODE: When pressed momentarily, these keys select a preset station directly. When pressed longer than 1 sec., current station is stored in preset memory bank. When PTY mode is selected, the PTY switch is shared as follows: PTY music group ---- PTY speech group ---- OFF MUSIC SPEECH 1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO 2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA 3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED 4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN 5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN 6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT (B) CD/MP3/WMA PLAYER MODE: 1. PAUSE 2. INT 3. RPT 4. RDM USING THE RDS FUNCTION What is RDS? The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car stereos. In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden. Test transmissions are being conducted in many other European countries. It is expected that RDS will be available in most western European countries in the near future. 5. ‘AF/REG’ function (ALTERNATIVE FREQUENCIES) When pressed momentarily, AF/REG switching mode is selected. When AF/REG switching mode is selected, the radio checks the signal strength of the AF all the time. When pressed long, it is activated as regional mode ON/OFF. – Regional mode ON: AF switching or PI SEEK is implemented to the station which have all PI codes same as current station. REG segment is turned on in LCD display. – Regional mode OFF The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented. 6. ‘TA’ function (TRAFFIC ANNOUNCEMENT) When pressed momentarily, it is activated as TA mode on or off When TA mode is on and traffic announcement is transmitted – When the unit is CD/MP3 mode, it will switch to radio mode temporarily. – If the volume level was under the threshold point, it will be raised to the threshold point. – When TP station is received, TP segment is turned on in LCD display. 7. ‘PTY’ function (PROGRAM TYPE) PTY MUSIC ---- PTY SPEECH ---- PTY OFF While selecting PTY type, its selection is implemented by preset buttons as described in preset key. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. 8. STEREO/MONO (ST) When FM station is weak and disturbed, listening can be improve by selecting MONO. 9. DISPLAY (DISP) When this key is pressed, it is operated as the conversion of each display mode as follow. 1) In case of receiving RDS station. RADIO MODE PS ---- CT ---- FREQ ---- PTY CD/MP3/WMA PLAYER MODE CDP ---- CT ---- PS ---- FREQ ---- PTY 2) In case of receiving NON RDS station RADIO MODE FREQ ---- CLOCK ----NO PTY CD/MP3/WMA PLAYER MODE CDP ---- FREQ ---- CLOCK ---- NO PTY Each display time is several seconds, and come back to 1’st position after several seconds. Notes: • CT = clock time • FREQ = frequency • CDP = CD Player 10. MODE BUTTON (MODE) By pressing this key, user can select. AUX/TUNER/CD-MP3/USB or MMC/SD mode. 11. BAND BUTTON (BD) Each band is toggled cyclically by pressing this key FM1---FM2---FM3--MW1--MW2. 12. AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN ) (A) RADIO MODE When pressed momentarily, these keys are operated as MANUAL tuning mode. When pressed longer than 1 sec., they are operated as SEEK tuning mode. (B) CD/MP3/WMA PLAYER MODE When pressed momentarily, they are operated as TRACK UP or TRACK DOWN mode. When pressed longer than 1 sec., they are operated as CUE or REVIEW mode. 13. AUTO SEEK SEARCH TUNING (A/PS) By pressing shortly, the radio searches for each preset station. When field strength level is bigger than the threshold level of stop level, the radio is holding at that preset number for 5 sec. with releasing mute, and then searches again. By pressing longer than 1 sec, and then 6 strongest stations are preset to the corresponding preset number. When AS operation is finished, the radio executes the preset scan. 14. ‘SCAN’ AUTOMATIC TUNING CONTROL (SCN) This key is operated as RADIO SCAN. The operation is similar as normal search but different thing is holding 5 seconds on every station detected in RADIO SCAN mode. 15. MUTE BUTTON (MUTE) Press and hold this button to mute the sound at once. Press again to return to previous volume level. 16. LCD DISPLAY The Liquid Crystal Display will display the current state of the unit. 17. OPEN THE FRONT PANEL Press REL button and the front panel will open. CD/MP3/WMA CONTROL LOCATION OF PARTS 18. CD SLOT Carefully insert the CD into the disc slot with the label side uppermost. The CD starts automatically play. 19. CD EJECT BUTTON Press the EJECT button to remove the CD. 20. TOP BUTTON Press to play first song of disc. 21. PAUSE BUTTON During “PLAY”, press (21) button to “PAUSE”. Press it again to resume play. TRACK/SEARCH BUTTON (12) FORWARD AND REVERSE TRACK SEARCH (or changing songs) Press the SKIP button ( or ) during play to go to the desired track(song). ....REVERSE ....FORWARD Press and hold the SKIP button ( or ) during play to scan the disc at high speed. When the desired music section of the disc is found, release the button. Normal play will resume. 22. INTRO BUTTON (Preview all Tracks) When this button is pressed, “INT ON” indication is displayed and the first several seconds of each track of the disc is played. Press again to stop intro and listen to track. 23. REPEAT BUTTON When this button is pressed, “RPT ON” indication is displayed and play of the selected track will be continually repeated until the Track repeat mode is cancelled by pressing ‘RPT’ button again. 24. RANDOM BUTTON When this button is pressed, “RDM ON” indication is displayed and each track of the disc is played in random instead of normal progression. To cancel RANDOM mode, press ‘RDM’ button (24) again. 25, 26. 10 TRACK UP/DOWN SELECT: (In case of MP3 files) M5: 10 Track down / M6: 10 Track up HOW TO SELECT MP3/WMA FILES 1. Searching Track: • Press and hold “A/PS”, then search track is activated. • Press “SEL” button, then the first digit will flash. • Rotary “VOL knob to right or left”, select first digit desired. • Press “SEL” button, then the first digit is fixed and second digit will flash. • Rotary “VOL knob to right or left”, select 2’nd 3’rd respectively. • Then automatically the song selected will start. 2. Searching Character: • Press and hold “A/PS”. Press “A/PS” again, then character search mode is activated. • Press “SEL” button, then “A” character is displayed. • Rotary “VOL knob to right or left”, you can select the desired letter. • Press “SEL” button longer than 2 sec. • The song with the same character you selected is displayed. • Rotary “VOL knob to right or left”, you can select the desired song. • Press “SEL” button, then the song selected will start. 3. Searching File Name: • Press and hold “A/PS”. Press “A/PS” again, then directory search is activated. • Press “SEL” button, then the first directory is displayed. • Rotary “VOL knob to right or left”, you can select the desired directory. • Press “SEL” button again, then the directory is fixed and the first file name is displayed. • Rotary “VOL knob to right or left”, you can select the file you want. • Press “SEL” button, then the song selected will start. Connecting it to Portable MP3 Player 27. USB Port Using USB cable to connect Your Portable MP3 Player. 28. MULTI-MEDIA CARD (MMC) / SD CARD SLOT Support MP3 ID3 format music only. * IMPORTANT INFORMATION: BECAUSE OF THE GREAT VARIETY OF PRODUCTS WITH USB,SD AND MMC CARD PORTS AND THEIR SOMETIMES QUITE MANUFACTURER-SPECIFIC FUNCTIONS WE CAN NEITHER GUARANTEE THAT ALL DEVICES WILL BE RECOGNIZED NOR THAT ALL OPERATING OPTIONS THAT ARE POSSIBLE IN THEORY WILL ACTUALLY WORK HOW TO USE BLUETOOTH IN YOUR CAR AUDIO HOW TO PERFORM PAIRING 3 2 1 Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a procedure used to connect 2 Bluetooth devices together. 5 4 6 1. Press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “PAIRING” displays. 8 9 7 3. Press and hold SEL button to engage paring mode. “PAIRING” blinks on the display. # 0 4. Turn on the Bluetooth feature of your mobile phone. Perform “Add Bluetooth device” from your mobile phone. The mobile will search for any Bluetooth devices within the range. Select “CAR BLUETOOTH” and enter Passkey: “0000” to connect to the car audio. (Please refer to the instruction manual of your mobile phone for Bluetooth Pairing). 5. The LCD will display “PAIRED” after successful pairing. Note: • ��� If “DISCONN” shows instead of “PAIRING”, it means the head unit currently is paired with another device. Press and hold SEL button to disconnect the connection and perform steps above again. • “CAR BLUETOOTH” is the Bluetooth device name of the car stereo. • ������������������������������������������������������������������������������������������ Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices. Audio Streaming If your phone is “A2DP” format compatible, then you can play music in your mobile and the sound will be transferred to car head unit. 1. Make sure your mobile and the unit is properly paired and connected. 2. Play the music through your mobile music player software. 3. Press MODE repeatedly until “BT-PLAY” appears in the display. The sound will be transferred to the head unit. Making Calls Using the Dial Keypad You can make calls directly from the supplied Dial Keypad. Before you make calls, make sure that the devices are properly paired and the keypad cable properly connected to the back of the head unit. 1. Press and hold PHONE on the dial keypad. 2. Enter the phone number via the keypad and press button to dial out. Press button to make corrections when entering numbers. 3. Press button to end call. Answering / Hanging Up To answer a call, press the button on the dial keypad. Speak directly to the keypad’s microphone. Once you have finished your conversation, press the button to hang up. Calls (Outgoing, Incoming) The unit stores all the incoming and outgoing calls. Use this feature to check the numbers and make calls from it. “OUT NUM” – outgoing calls made through the dial keypad. 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. “OUT NUM” displays. 2. Press and hold SEL button again. 3. Rotate volume knob to search for entries and press to call. “IN NUM” – incoming calls received. 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “IN NUM” displays. 3. Press and hold SEL button again. 4. Rotate volume knob to search for entries and press to call. 10 Adding Contacts The unit can save contact telephone number for quick access. 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “ADD NUM” displays. 3. Press and hold SEL button again. 4. Using volume knob, enter the name of the contact. Press SEL button to save each character entered. 5. Enter the phone number. Press SEL button to save each number entered. 6. Press and hold SEL button to save entry. Finding Contacts After adding contacts, you can use this feature to find them. 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “FIND NUM” displays. 3. Press and hold SEL button again. 4. Using volume knob, select the name of the contact and press to call. Deleting Contacts 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “FIND NUM” displays. 3. Press and hold SEL button again. 4. Rotate VOL knob until the name of the contact you want to delete displays. 5. Press and hold “ ” for 2 seconds to delete contact. How to Set Incoming Call Melody 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “MELODY” displays. 3. Rotate VOL knob to the desired melody. How to Set Incoming Call Ring Volume 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “RING” displays. 3. Rotate VOL knob to the desired level. How to Set Conversation Volume 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “TEL” displays. 3. Rotate VOL knob to the desired level. Disconnect Paired Devices You can disconnect to an already paired Bluetooth device from your car stereo. 1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. 2. Press SEL button repeatedly until “DISCONN” displays. 3. Press and hold SEL button again to disconnect. • • • • RESET Reset button is placed on the housing. The reset button is to be activated for the following reason: Initial installation of the unit when all wiring is completed. All the function button do not operate. Error symbol on the display. 11 RESET TECHNICAL SPECIFICATIONS CD/MP3/WMA PLAYER SECTION Signal to Noise Ratio Channel Separation Frequency Response > 60 dB > 50 dB (1kHz) 20Hz - 20 kHz TUNER (FM) Frequency range Intermediate frequency Sensitivity Stereo separation Signal to noise ratio Channel step 87.5-108 MHz 10.7 MHz 2.8 µV 30 dB 50 dB 50 kHz TUNER (MW) Frequency range Intermediate frequency Usable Sensitivity 522-1620 KHz 450 KHz 32 dBµV LINE-OUT Output Impedance 350mV 10k Ohm GENERAL Power Supply Speaker impedance Output power 12V DC (10.8-15.6V allowable) 4 or 8 ohm 60W x 4CH Note: Specification and the design are subject to possible modification without notice due to improvements. 12
