Download ATLAS 800 Series Octal BRI S/T Module (Rev A)

61200343L1-1A
November 2001
901 Explorer Boulevard
P.O. Box 140000
Huntsville, AL 35814-4000
(256) 963-8000
© 2001 ADTRAN, Inc.
All Rights Reserved.
Printed in U.S.A.
!"#
$%
& !
' (
)
%
*+
3
!
"
#$%
,
,
,
!!
!
!!!
%!
!-./
0)!*
"+-0$1''2
!
(!!
!!
4
"
"
&!
'()*
#$%
!
"#$%%&
'
#(!
)*+,
#-
"$ 3
+-0
-./4++55
"$ %+-0
"$ %
').
/
"$
!
)
6
"$ 7
!
8!
!
)
6
"$ +
"$8
)6
"$ 3"$)"$"$
!999999999"$!
5
0
!#
(
1
(
(
2)
&,
6
4++!
%-./4++:
4++!"50;$3
!
3
!3!!6
!%
!
4++
& %
!
!!
' 3*
%5 ;
%
1 %#!
.
4++!%
4++-./
< %
/ %50;
!
!!
3
50;!*!%!
50;
*50;
= %
!!
+
+
7
+
%"" +
!
%
+ !
-14++5%!
!%
:
*
"& !
%*+ #> ?
3+0@#AA&+
+*
+ > ;?
;27#AA&+
8
"&!
;%+3
@+%
!
%
B
7
%
3
B
!!
*
"
*$%!
!!
5
8+
!
(
%
%C;"C;$!
!!!%
!
C;!*AA
9
,"
%5 ;!
!4
%5 ;0
55-
-
52 8"52 $ %5 ;
4!52 )&# -#.",
/
%5 ;!"1$
+
%5 ; %5 ;
-2 %5 ;D
"
-2$%
+! %5 ;
(
%5 ;!3 %5 ;
+
%5 ;%
%5 ;D*
%
!+
8
%5 ;
0E+0-%4:5%F0C323%0 55 ;%G0@+5370 7:H0%F04:50I:3;I
+:;@%3%(%0@%F0@:C0 ;0E+C(@3H05020G:4%F0+(@%:205 ;%F0
0E+C(@3H0C3 73C3%G:4 %5 ; ;3@3;C30(:4 ;G ; CC:%F05
55 ;%30@"0E-50@@0:532-C30$ %5 ;@-0+343+ CCG3@+C 32@ CC
:%F05 55 ;%30@3;+C(3;I"3%F:(%C323% %3:;$ CC 55 ;%30@:4
205+F ;% 73C3%G ;43%;0@@4:5 - 5%3+(C 5-(5-:@0@:20@% %0@:
;:% CC:%F00E+C(@3:;:432-C30 55 ;%30@@:%F3@0E+C(@3:;2 G
;:% --CG%:+(@%:205
3! %5 ;+
!
*
*
+
"
$ %5 ;
!"$*
@*
!*
+
10
"
00$
%5 ;!
!
8"52 $ %5 ;4
!52 #!
-
%5 ; 0 %5 ;@
!
"! !
-
3
%5 ;%@!!
#$%
&#
%+0*@!" +0@$
!!
4 +0@F
'()
!& ""*!
3 %5 ;%@%@
+-@!"+ -@$52 4
+ -@
'+,
"-* !""
3
52 "$
%5 ;+-@!
=A0*7!
F! &1/A.
52 J9999999999999
11
%0;"0;$%%%
!!!
%5 ;D %5 ;!!
8
4
%
20%+
12
#+$
!./!
#/
"-* !
#,
01,
Table of Contents
List of Figures ................................................................................................................................................. 1-15
List of Tables................................................................................................................................................... 1-17
Chapter 1
Introduction............................................................................................................................ 1-19
Octal BRI S/T Module Overview ................................................................................................................. 1-19
Functional Description ................................................................................................................................... 1-19
Features ............................................................................................................................................................ 1-20
Octal BRI S/T Module Specifications .......................................................................................................... 1-20
Physical Description ....................................................................................................................................... 1-21
Chapter 2
Installation.............................................................................................................................. 2-23
Before Installing the Octal BRI S/T Module ............................................................................................... 2-23
Shipping Contents ................................................................................................................................... 2-23
Installing the Octal BRI S/T Module ........................................................................................................... 2-24
Wiring ............................................................................................................................................................... 2-25
Power Up and Initialization .......................................................................................................................... 2-25
Failed Self-Test ......................................................................................................................................... 2-25
Operation Alarms .................................................................................................................................... 2-25
Chapter 3
Operation ................................................................................................................................ 3-27
Overview .......................................................................................................................................................... 3-27
Terminal Menu Structure............................................................................................................................... 3-27
Modules ............................................................................................................................................................ 3-28
Slt ............................................................................................................................................................... 3-29
Type .......................................................................................................................................................... 3-29
Menu ......................................................................................................................................................... 3-29
Alarm ........................................................................................................................................................ 3-29
Test ............................................................................................................................................................ 3-30
State ........................................................................................................................................................... 3-30
Status ........................................................................................................................................................ 3-30
Online ................................................................................................................................................ 3-30
No Response ..................................................................................................................................... 3-30
Empty ................................................................................................................................................ 3-30
Offline ................................................................................................................................................ 3-30
Offline/No Response ...................................................................................................................... 3-30
Rev ............................................................................................................................................................ 3-30
Modules/Menu ............................................................................................................................................... 3-31
S/T BRI Menus ........................................................................................................................................ 3-31
Info ..................................................................................................................................................... 3-31
Alarm ................................................................................................................................................. 3-32
Channel Usage ................................................................................................................................. 3-32
61200343L1-1
Octal BRI S/T Module User Manual
13
Table of Contents
Configuration ................................................................................................................................... 3-32
Test ..................................................................................................................................................... 3-32
Module Alarms ....................................................................................................................................... 3-32
Test Activity ............................................................................................................................................. 3-32
ATLAS Features Used with Octal BRI S/T Module Options ................................................................... 3-32
Factory Restore ................................................................................................................................................ 3-32
Run Selftest....................................................................................................................................................... 3-33
Appendix A Dial Plan Interface Configuration .................................................................................... A-35
Index .........................................................................................................................................................Index-39
14
Octal BRI S/T Module User Manual
61200343L1-1
Figure 1-1.
Figure 1-2.
Figure 2-1.
Figure 3-1.
Figure 3-2.
Figure 3-3.
Figure A-1.
Figure A-2.
Octal BRI S/T System ............................................................................................................... 1-19
Octal BRI S/T Option Module................................................................................................. 1-21
Installing the Octal BRI S/T Module...................................................................................... 2-24
Modules Menu........................................................................................................................... 3-28
Menu Tree for Octal BRI S/T Modules Menu....................................................................... 3-29
Octal BRI S/T Module Menu Options ................................................................................... 3-31
Dial Plan Menus ....................................................................................................................... A-35
Terminal Resistance (100 Ω) Jumper Configuration ........................................................... A-36
61200343L1-1
Octal BRI S/T Module User Manual
15
List of Figures
16
Octal BRI S/T Module User Manual
61200343L1-1
List of Tables
Table 2-1.
Network Pinout Connection.................................................................................................... 2-25
61200343L1-1
Octal BRI S/T Module User Manual
17
List of Tables
18
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 1
Introduction
OCTAL BRI S/T MODULE OVERVIEW
The Octal BRI S/T Module is a member of the ATLAS family of integrated
access products, providing eight Basic Rate ISDN (BRI) S/T interfaces, each
capable of operating in NT mode.
The Octal BRI S/T Module combines with the ATLAS 800 Series base unit
and other ATLAS modules to support requirements calling for multiple BRI
circuits. As many Octal BRI S/T Modules can be installed in a system as can
be physically accommodated in the ATLAS 800 chassis. Figure 1-1 shows a
sample application of the Octal BRI S/T Module.
ATLAS 800 series
S/T Module
T1/PRI Module
Figure 1-1. Octal BRI S/T System
When combined with the ATLAS 800 Series base unit and, optionally, one or
more Quad T1/PRI Modules, the Octal BRI S/T Module can implement an
ISDN access switch, combining multiple BRI circuits into one or more Primary Rate ISDN (PRI) circuits.
FUNCTIONAL DESCRIPTION
The Octal BRI S/T Module installs in any available option slot in the ATLAS
800 Series chassis. You can view the status of the module itself, as well as the
circuits to which it interfaces, from the ATLAS front panel. Additional status
information is available via the terminal menus, accessible through either a
VT-100 terminal connected to the ATLAS 800 Series control port, or via a Telnet session established through the base unit’s Ethernet port. Use the terminal menu to configure the Octal BRI S/T Module and to download
application software.
61200343L1-1
Octal BRI S/T Module User Manual
19
Chapter 1. Introduction
FEATURES
Features of the Octal BRI S/T Module are listed here:
•
Eight BRI S/T Interfaces
•
Hot swappable
•
NT mode support
•
Maximum distance of 3,000 feet
OCTAL BRI S/T MODULE SPECIFICATIONS
Each port of the Octal BRI S/T Module conforms to the following specifications:
192 kbps data rate
ASI (Alternate Space Incoding)
!
Framing per ANSI T1.601-1992
Power-on, circuit self-test line loopback, port loopback (internal toward system)
•
Line loopback (VT-100/remote/in-band)
•
BRI switch supported support for the following switches :
AT&T 5ESS (NT)
Nortel DMS-100 (NT)
National ISDN-1 )(NT)
Euro ISDN (NT)
•
Report line performance data via SNMP in RFC1406 format
RJ-45
20
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 1. Introduction
PHYSICAL DESCRIPTION
The Octal BRI S/T Module (see Figure 1-2) plugs into any available option
slot in the rear of the ATLAS 800 Series chassis.
Figure 1-2. Octal BRI S/T Option Module
The label over each RJ-45 connector refers to the port on the Octal BRI S/T
Module.
61200343L1-1
Octal BRI S/T Module User Manual
21
Chapter 1. Introduction
22
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 2
Installation
BEFORE INSTALLING THE OCTAL BRI S/T MODULE
Carefully unpack and inspect the Octal BRI S/T Module for shipping damages. If you suspect damage occurred during shipping, file a claim immediately with the carrier and then contact ADTRAN Technical Support (see the
front pages of this manual for pertinent information). If possible, keep the
original shipping container for returning the Octal BRI S/T Module for repair or for verification of shipping damage.
Shipping Contents
The ADTRAN shipment includes the following items:
61200343L1-1
•
Octal BRI S/T Module
•
Octal BRI S/T Module Quick Start Guide
•
Octal BRI S/T Module User Manual (insert into the ATLAS 800 Series
User Manual)
•
Eight RJ-45-to-RJ-11 cables
Octal BRI S/T Module User Manual
23
Chapter 2. Installation
INSTALLING THE OCTAL BRI S/T MODULE
Figure 2-1 represents the actions required to properly install the
Octal BRI S/T Module, as described in the Step/Action table below.
Figure 2-1. Installing the Octal BRI S/T Module
Before installing the Octal BRI S/T Module, verify that the jumpers
module are set correctly for the current port configuration (refer to
Appendix A or the Octal BRI S/T Quick Start Guide for more
details).
Instructions for Installing the Octal BRI S/T Module
Step
Action
1
Remove the cover plate from the appropriate option slot in the
ATLAS 800 Series chassis rear panel.
2
Slide the Octal BRI S/T Module into the option slot until the
module is firmly positioned against the front of the chassis.
3
Secure the thumbscrews at both edges of the module.
4
Connect the cables to the associated device(s).
5
Complete installation of remaining modules and Base Unit as
specified in the Installation chapter of the ATLAS 800 Series
User Manual.
To ensure that the thumbscrews are securely fastened, use a
screwdriver to tighten them.
24
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 2. Installation
WIRING
Each module port uses a single RJ-45 jack to connect to a S/T interface circuit. Table 2-1 shows the network pinout connection. The required wiring
connection follows:
(USOC) RJ-45
Connector Type
Table 2-1. Network Pinout Connection
PIN
NAME
DESCRIPTION
1, 2, 7, 8
Unused
—
3, 6
Receive
Receive for User Term (NT Mode)
4, 5
Transmit
Transmit for User Term (NT Mode)
POWER UP AND INITIALIZATION
The Octal BRI S/T Module requires no initialization input during the powerup sequence, as described in the ATLAS 800 Series User Manuals. Any previously configured setting for the Octal BRI S/T Module is automatically restored upon power-up.
Failed Self-Test
If the Octal BRI S/T Module fails self-test, a message will be displayed on the
LCD and the terminal menu self-test log during power-up. See the appropriate ATLAS 800 Series User Manual for details.
Operation Alarms
The red ALARM LED (located with the Module LEDs on the front panel) illuminates when an alarm condition is detected.
61200343L1-1
Octal BRI S/T Module User Manual
25
Chapter 2. Installation
26
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 3
Operation
OVERVIEW
You can control and configure the Octal BRI S/T Module from a variety of
sources, including the following:
•
The ATLAS 800 Series front panel, providing minimal configuration and
status support
•
The terminal menus, allowing detailed configuration, status, and diagnostics
•
SNMP, primarily for reporting alarm conditions and system status
The remainder of this section describes the menu items presented when
managing the Octal BRI S/T Module via the terminal menu.
Access the terminal menu using either a VT-100 terminal attached to the
ATLAS 800 Series Base Unit’s control port or a Telnet session established
through the Base Unit’s Ethernet port. The ATLAS 800 Series User Manual
provides detailed instructions on the operation of each of these management
approaches.
To edit items in the terminal menu, you must have the appropriate
password level. Each menu description in this section indicates the
password level required for write and read access. See “Access
Passwords” in the appropriate ATLAS 800 Series User Manual
for detailed information on working with passwords. Security level
0 users can view and edit every available field. Security level 5
users can view any field but cannot edit.
TERMINAL MENU STRUCTURE
ATLAS 800 Series uses a hierarchical menu structure to provide access to all
of its features. The top-most menu level leads to submenus which are
grouped by functionality. All menu items display in the terminal window.
61200343L1-1
Octal BRI S/T Module User Manual
27
Chapter 3. Operation
To access the Octal BRI S/T Module, activate the MODULES menu. The following sections describe the menu items for the MODULES menu.
Refer to the appropriate ATLAS 800 Series User Manual for
detailed instructions on navigating through the terminal menu.
MODULES
The ATLAS 800 Series system controller automatically detects the presence
of the Octal BRI S/T Module when it is installed in the system. To see the
menus for the Octal BRI S/T Module via the terminal menu, use the arrow
keys to scroll to the Modules menu and press ENTER to access the module
choices. Figure 3-1 shows the Modules menu (see also the menu tree in Figure 3-2). The following sections describe all the Modules’ menu options.
Figure 3-1. Modules Menu
28
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 3. Operation
Info
Part Number
Serial Number
Board Revision
Alarm
Prt
Alarms
Channel
Channel Usage
Prt
Cha
Configuration
Prt
Port Name
Test
Prt
Local Loopback
Remote Loopback
ST-BRI Menus
Module Alarms
Modules
Slt
Type
Menu
Alarm
Test
State
Status
Rev
Test Activity
Figure 3-2. Menu Tree for Octal BRI S/T Modules Menu
SLT
Read security: 5
Displays the number of the available slots in the ATLAS 800 Series chassis.
Slot 0 refers to the ATLAS 800 Series unit. This field is read-only.
TYPE
Write security: 3; Read security: 5
Displays the type of module actually installed in the slot or the type of
module you plan to install in the slot. If an Octal BRI S/T Module is
installed, the Type field automatically defaults to ST-BRI (the Octal BRI S/T
Module). You can use this field to preconfigure a system before actually
installing modules by simply specifying the module that you want to install
in each slot.
TYPE automatically displays the name of an installed module. If
you want to change this field to a different type of module, you
must set TYPE to EMPTY before selecting the other module.
MENU
Displays additional status and configuration menus for the selected module.
(To access the submenus for this item, use the arrow keys to scroll to the MENU
column for the module you want to edit, and press Enter.) For detailed information on each submenu item, see the section Modules/Menu on page 3-31.
ALARM
Read security: 5
Displays an alarm condition on the Octal BRI S/T Module. Press Enter in
this field to activate the menu.
61200343L1-1
Octal BRI S/T Module User Manual
29
Chapter 3. Operation
TEST
Read security: 5
Displays test name if the Octal BRI S/T Module is executing a test. Press
Enter in this field to activate the menu.
STATE
Displays module status as either ONLINE of OFFLINE. Even though a module
is physically installed, it must be marked as online for it to be considered an
available resource. This field allows an installed module to be marked as offline, which may be useful in system troubleshooting. If you choose OFFLINE,
the module will not be in alarm condition, but will display OFFLINE.
Once a module is installed, STATE must be set to ONLINE in order
for the ATLAS 800 Series unit to use the module for any data
bandwidth.
STATUS
REV
30
This read-only field provides status information on the Octal BRI S/T Module.
The following messages may display:
ONLINE
The module is enabled, and is responding to the system controller’s status
polls. This is the normal response of the system.
NO RESPONSE
The module is enabled, but is not responding to the system controller’s status polls. This response indicates either a problem in the system or that the
module is not installed.
EMPTY
The system controller has not detected the presence of a module in the slot,
nor has a module been manually enabled for this option slot.
OFFLINE
The module is installed, but has been taken offline by a user. The module is
still responding to controller polls.
OFFLINE/NO
RESPONSE
The module is installed, but has been taken offline by a user. The module is
not responding to polls.
This read-only field displays the hardware revision of the Octal BRI S/T Module.
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 3. Operation
MODULES/MENU
Figure 3-3 shows the menu options available for the Octal BRI S/T Module
(see also the menu tree in Figure 3-2 on page 3-29). The following sections
describe these options.
Figure 3-3. Octal BRI S/T Module Menu Options
S/T BRI MENUS
INFO
Accesses additional submenus.
Provides information about module part number, serial number , and board
revision.
PART NUMBER
Displays the part number of the module (read only).
SERIAL NUMBER
Displays the serial number of the module (read only).
BOARD REVISION
Displays the PCB revision (read only).
61200343L1-1
Octal BRI S/T Module User Manual
31
Chapter 3. Operation
ALARM
Displays alarm conditions including the port number (PRT) and the alarm
type (ALARMS).
L1 DOWN
An L1 alarm is indicated when problems are detected with the basic rate
endpoint or for a cable problem.
CHANNEL
Displays the status of the D-channel alarm.
CHANNEL
USAGE
Displays the channel status (CHA) of each of the eight Octal BRI S/T Module
ports (PRT). The following symbols may display:
–
Unallocated channel
.
Inactive channel
A
Allocated B Channel
D
D-channel
CONFIGURATION
Allows the user to personally identify each port with an appropriate name.
TEST
Activates either a local loopback toward the S/T interface or a remote loopback toward the ATLAS 800 Series chassis. The loopback options include
B1 + B2, LOOPBACK B2, LOOPBACK B1 + B2, or LOOPBACK B2 + D.
MODULE ALARMS
Provides a shortcut to the ALARM menu (see Alarm on page 3-32).
TEST ACTIVITY
Provides a shortcut to the TEST menu (see Test on page 3-32).
ATLAS FEATURES USED WITH OCTAL BRI S/T MODULE OPTIONS
Two additional ATLAS 800 Series menu items can operate in conjunction
with the Octal BRI S/T Module: FACTORY RESTORE and RUN SELFTEST.
FACTORY
RESTORE
32
You can restore the factory default settings for an Octal BRI S/T Module by
pressing F either while the cursor is over the SLT number (this action restores
the factory settings for all of the module options) or while the cursor is over
an individual field (this action restores factory settings only for the particular field).
Octal BRI S/T Module User Manual
61200343L1-1
Chapter 3. Operation
RUN SELFTEST
RUN SELFTEST, a submenu of the ATLAS 800 Series main menu item TEST,
executes both the Octal BRI S/T Module internal test and the ATLAS 800 Series internal test. For additional information on RUN SELFTEST, see the ATLAS 800 Series User Manual.
When RUN SELFTEST displays, place the cursor on it and press Enter to execute the test. The unit continuously changes the display on the self-test log
screen until all test results are shown.
61200343L1-1
Octal BRI S/T Module User Manual
33
Chapter 3. Operation
34
Octal BRI S/T Module User Manual
61200343L1-1
Appendix A
Dial Plan Interface Configuration
The IFCE CONFIG option for the DIAL PLAN menu (see Figure A-1) sets configuration parameters for the endpoint. These parameters vary by the type of
port selected. The following section describes the configuration options
available for the Octal BRI S/T Module. The DIAL PLAN menus are only accessible when using terminal mode. To access these options, select DIAL
PLAN from the ATLAS menu.
Figure A-1. Dial Plan Menus
61200343L1-1
Octal BRI S/T User Manual
35
Appendix A. Dial Plan Interface Configuration
OCTAL BRI S/T MODULE INTERFACE CONFIGURATION
This section describes the network and user termination configuration settings for the Octal BRI S/T Module when using the DIAL PLAN menus. The
following configurations are provided here:
•
Octal BRI S/T Module: User Termination on page A-36
OCTAL BRI S/T MODULE INTERFACE JUMPER SETTINGS
The Octal BRI S/T Module interfaces provide the capability to individually
configure both the terminal resistance and line power using two sets of
jumpers located on the module board behind the port interfaces.
TERMINAL
RESISTANCE
(TERM RES)
By default the terminal resistance for each port of the Octal BRI S/T Module
is set at 100 Ω. For this configuration, both jumpers labeled TERM RES must
be in the ON position (the OFF pin left uncovered).
ON
OFF
PORT 1
P1
P3
ON
TERM
RES
PORT 1
OFF
P1
APC14103E
000029P
P3
PS1
PWR
Figure A-2. Terminal Resistance (100 Ω) Jumper Configuration
ADTRAN does not recommend changing the Terminal Resistance
jumpers to the OFF position.
OCTAL BRI S/T MODULE: USER TERMINATION
The Octal BRI S/T Module acts like the network while interfacing to user
equipment (terminal adapters). When you are working in the network termination section of the DIAL PLAN menu and SLT is defined as a S/T BRI
module, the following interface configuration options are available:
Using the Octal BRI S/T Module on a User Term endpoint requires the
use of a straight through ISDN S/T cable.
36
Octal BRI S/T User Manual
61200343L1-1
Appendix A. Dial Plan Interface Configuration
SWITCH TYPE
Write security: 2; Read security: 5
Defines the type of ISDN switch that the port will simulate. If connected to
another ATLAS, both need to be set to the same type. The following options
are available:
•
Lucent 5E
•
Northern DMS 100
•
National-ISDN
•
Euro-ISDN
SPID LIST
Write security: 2; Read security: 5
The port, acting as the network, must use a SPID and a phone number in
order to satisfy the ISDN connection protocol expected by the user’s Terminal Adapter (TA).
PHONE NUMBER
The phone number(s) assigned to this BRI phone line.
SPID NUMBER
Defines the SPID number(s) used for this BRI line. Although the value of the
SPID is not significant, a SPID must be entered for each phone number. For
convenience, the SPID can be set to be the same as the phone number.
Octal BRI S/T Module Module does not support autoSPID detection
software which some terminal adapters offer.
No SPID Number is needed for the Euro-ISDN Switch Type.
CALLS
For User terminations, the number of calls is fixed at 2.
D64, D56, AUDIO,
SPEECH
These options reflect what the network has provisioned for this SPID. If the
BRI was purchased with different services provisioned for the SPIDs, then
the call must match the services supported.
61200343L1-1
Octal BRI S/T User Manual
37
Appendix A. Dial Plan Interface Configuration
38
Octal BRI S/T User Manual
61200343L1-1
Index
MODULE ALARMS 3-32
PART NUMBER 3-31
SERIAL NUMBER 3-31
TEST ACTIVITY 3-32
U-BRI MENUS 3-31
A
alarms 2-25
ATLAS menus
FACTORY RESTORE 3-32
RUN SELFTEST 3-33
P
D
pinout
network connection 2-25
power up 2-25
DIAL PLAN A-35
E
Euro ISDN
Octal BRI A-37
S
self test, failed 2-25
specifications 1-20
connectors 1-20
framing options 1-20
line codes 1-20
line rate 1-20
tests 1-20
I
initialization 2-25
installing the module 2-24
interface configuration A-36
M
MODULES menus and submenus 3-28
ALARMS 3-29
MENU 3-29
See also, MODULES/MENU.
REV 3-30
SLT 3-29
STATE 3-30
STATUS 3-30
TEST 3-30
TYPE 3-29
MODULES/MENU 3-31
ALARM 3-32
BOARD REVISION 3-31
CHANNEL USAGE 3-32
CONFIGURATION 3-32
INFO 3-31
61200343L1-1
T
terminal menu structure 3-27
U
USER TERMINATION A-36
CALLS A-37
D64, D56, AUDIO, SPEECH A-37
PHONE NUMBER A-37
SPID LIST A-37
SPID NUMBER A-37
SWITCH TYPE A-37
W
wiring 2-25
Octal BRI S/T Module User Manual
39
Index
Index-40
Octal BRI S/T Module User Manual
61200343L1-1