Download car seat travel tote

65001
car seat
travel tote
Keep these instructions for
future reference as they
contain important information.
Adult assembly required.
Accessories not included.
User Manual
Instructions
Loading Car Seat Travel Tote
Fig. A
Backpack Luggage Mode
Fig. C
1. Unzip Car Seat Travel Tote.
1. Remove both shoulder straps from side
2. Place child safety seat in most compact, upright
position before placing inside the Car Seat
Travel Tote.
2. Install the straps by attaching both strap end
clips to D-rings located at top of Car Seat
Travel Tote. Fig. C
3. Load empty child safety seat into Car Seat Travel
Tote as shown so that back of child safety seat
faces zipper. Fig. A
3. Attach two remaining clips at other end of
straps to the single D-ring located at bottom
of Car Seat Travel Tote.
4. Zip to close.
4. Place arms through straps and lift Car Seat
Travel Tote onto back. Fig. D
Wheeled Luggage Mode
Fig. B
1. If converting from backpack luggage mode, remove
shoulder straps and store in side pocket.
2. Pull in direction shown. Fig. B
pocket.*
Note: Before checking luggage, close zipper
to prevent accidental opening during transport
and remove backpack straps and place in
pocket. Make sure pocket is secure.
Fig. D
*Car Seat Travel Tote is pre-assembled in backpack
luggage mode. This step is only necessary if you have
removed the shoulder straps for transport.
Note: The Car Seat Travel Tote is designed to hold a
child safety seat only. Do not place any items, other
than a child safety seat into Care Seat Travel Tote.
To prevent injury, do not allow child to sit on this product
while child car seat is enclosed and pulled in luggage mode.
1
Care: Wipe all parts with a clean cloth dampened with a mild soap and water
solution. Air dry. Do not use bleach. Do not submerge in water.
2
making together better™
Questions?
1.866.869.8257
bricababy.com
©2010 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.
Printed in China