Download Model 42i-TL - User Manual

Chapter 6
Troubleshooting
This instrument has been designed to achieve a high level of reliability. In
the event of problems or failure, the troubleshooting guidelines, board-level
connection diagrams, connector pin descriptions, and testing procedures
presented in this chapter should be helpful in isolating and identifying
problems.
For additional fault location information refer to the “Preventive
Maintenance” chapter in this manual.
The service mode in the “Operation” chapter includes parameters and
functions that are useful when making adjustments or diagnosing
problems.
The Technical Support Department at Thermo Fisher Scientific can also
be consulted in the event of problems. See “Service Locations” on page 622 for contact information. In any correspondence with the factory, please
note both the serial number and program number of the instrument.
This chapter provides the following troubleshooting and service support
information:
●
“Safety Precautions” on page 6-1
●
“Troubleshooting Guides” on page 6-1
●
“Board-Level Connection Diagrams” on page 6-6
●
“Connector Pin Descriptions” on page 6-8
●
“Service Locations” on page 6-22
Safety Precautions
Read the safety precautions in the Preface and “Servicing” chapter before
performing any actions listed in this chapter.
Troubleshooting
Guides
The troubleshooting guides presented in this chapter are designed to help
isolate and identify instrument problems.
Table 6–1 provides general troubleshooting information and indicates the
checks that you should perform if you experience an instrument problem.
Thermo Fisher Scientific
Model 42i Trace Level Instruction Manual
6-1