Download NuTiny-SDK-NUC240 User Manual

NuTiny-SDK-NUC240 User Manual
ARM Cortex™-M0
32-BIT MICROCONTROLLER
NuTiny-SDK-NUC240 User Manual
For NuMicro™ NUC240 Series
The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
Nuvoton is providing this document only for reference purposes of NuMicro™ microcontroller based system design. Nuvoton assumes
no responsibility for errors or omissions.
All data and specifications are subject to change without notice.
For additional information or questions, please contact: Nuvoton Technology Corporation.
- 1 -
Publication Release Date: Sep. 14, 2012
Revision V1.0
NuTiny-SDK-NUC240 User Manual
1
Overview ....................................................................................................... 3
2
NuTiny-SDK-NUC240 Introduction .................................................................... 3
2.1
2.2
2.3
NuTiny -SDK-NUC240 Jumper Description ................................................................. 4
Pin Assignment for Extended Connector .................................................................... 5
NuTiny-SDK-NUC240 PCB Placement ........................................................................ 6
How to Start NuTiny -SDK-NUC240 on the Keil μVision® IDE ................................ 7
3
3.1
3.2
3.3
3.4
4
Keil uVision® IDE Software Download and Install ........................................................ 7
Nuvoton Nu-Link Driver Download and Install ............................................................ 7
Hardware Setup ..................................................................................................... 7
Smpl_NuTiny-NUC240 Example Program ................................................................... 8
How to Start NuTiny-SDK-NUC240 on the IAR Embedded Workbench ................... 9
4.1
4.2
4.3
4.4
IAR Embedded Workbench Software Download and Install........................................... 9
Nuvoton Nu-Link Driver Download and Install ............................................................ 9
Hardware Setup ..................................................................................................... 9
Smpl_NuTiny-NUC240 Example Program ................................................................. 10
5
NuTiny-EVB-NUC240 Schematic ..................................................................... 11
6
Download NuMicro Family Related Files from Nuvoton Company ................................ 13
™
6.1
6.2
6.3
7
Download NuMicro™ Keil μVision® IDE Driver ............................................................ 13
Download NuMicro™ IAR EWARM Driver ................................................................... 15
Download NuMicro™ NUC100 Series BSP Software Library.......................................... 17
Revision History .............................................................................................. 18
- 2 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
1
Overview
NuTiny-SDK-NUC240 is the specific development tool for NuMicro NUC240 series. Users can use NuTiny-SDKNUC240 to develop and verify the application program easily.
NuTiny-SDK-NUC240 includes two portions. One is NuTiny-EVB-NUC240 and the other is Nu-Link-Me. NuTiny-EVBNUC240 is the evaluation board and Nu-Link-Me is its Debug Adaptor. Thus, users do not need other additional ICE or
debug equipments.
2
NuTiny-SDK-NUC240 Introduction
NuTiny-SDK-NUC240 uses the NUC240VE3AE as the target microcontroller. Figure 2-1 is NuTiny-SDK-NUC240 for
NUC240 series, the left portion is called NuTiny-EVB-NUC240 and the right portion is Debug Adaptor called Nu-LinkMe.
NuTiny-EVB-NUC240 is similar to other development boards. Users can use it to develop and verify applications to
emulate the real behavior. The on board chip covers NUC240 series features. The NuTiny-EVB-NUC240 can be a real
system controller to design users’ target systems.
Nu-Link-Me is a Debug Adaptor. The Nu-Link-Me Debug Adaptor connects your PC's USB port to your target
system (via Serial Wired Debug Port) and allows you to program and debug embedded programs on the target
hardware. To use Nu-Link-Me Debug adaptor with IAR or Keil, please refer to “Nuvoton NuMicro™ IAR ICE driver
user manual “or Nuvoton NuMicro™ Keil ICE driver user manual” in detail. These two documents will be stored in the
local hard disk when the user installs each driver.
Figure 2-1 NuTiny-SDK-NUC240 (Blue PCB Board)
- 3 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
2.1
2.1.1
NuTiny -SDK-NUC240 Jumper Description
Power Setting




J1: USB port in NuTiny-EVB-NUC240
JP1: VCC5 Voltage connecter in NuTiny-EVB-NUC240
J2: USB port in Nu-Link-Me
JPR1: Select 5V or 3V for system power
POWER model
J1 USB port
J2 USB port
JP2 VCC5
MCU Voltage
Model 1
Connect to PC
X
DC 5V output
DC 5V
Model 2
X
Connect to PC
DC 5V output
DC 5V
Model 3
X
X
DC 2.8-5.5V input
Voltage by VCC input
X: Unused.
2.1.2
Debug Connector
 JP4: Connector in target board (NuTiny-EVB-NUC240) for connecting with Nuvoton ICE adaptor (Nu-Link-Me)
 JP9: Connector in ICE adaptor (Nu-Link-Me) for connecting with a target board (for example NuTiny-EVB-NUC240)
2.1.3
USB Connector
 J1: Mini USB Connector in NuTiny-EVB for application use
 J2: Mini USB Connector in Nu-Link-Me connected to a PC USB port
2.1.4
Extended Connector
 JP3, JP5, JP7 and JP8: Show all chip pins in NuTiny-EVB-NUC240
2.1.5
Reset Button
 SW1: Reset button in NuTiny-EVB-NUC240
2.1.6
Power Connector
 JP1: VCC connector in NuTiny-EVB-NUC240
 JP2: GND connector in NuTiny-EVB-NUC240
- 4 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
2.2 Pin Assignment for Extended Connector
NuTiny-EVB-NUC240 provides NUC240VE3AE on board and the extended connector for LQFP-100 pin.
Table 2-1 is the pin assignment for NUC240VE3AE.
Pin No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Pin Name
PE15
PE14
PE13
PB14
PB13
VBAT
X32O
X32I
PA11
PA10
PA9
PA8
PD8
PD9
PD10
PD11
PD12
PD13
PB4
PB5
PB6
PB7
LDO
VDD
VSS
Pin No
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Pin Name
PE8
PE7
VBUS
VDD33
DD+
PB0
PB1
PB2
PB3
PD6
PD7
PD14
PD15
PC5
PC4
PC3
PC2
PC1
PC0
PE6
PE5
PB11
PB10
PB9
Pin No
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
Pin Name
PE4
PE3
PE2
PE1
PE0
PC13
PC12
PC11
PC10
PC9
PC8
PA15
PA14
PA13
PA12
ICE_DAT
ICE_CK
VDD
VSS
AVSS
PA0
PA1
PA2
PA3
PA4
Pin No
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Pin Name
PA5
PA6
PA7
Vref
AVDD
PD0
PD1
PD2
PD3
PD4
PD5
PC7
PC6
PC15
PC14
PB15
XT1_Out
XT1_In
/RESET
VSS
VDD
PS2DAT
PS2CLK
PVSS
PB8
Table 2-1 Pin Assignment for NUC 240 Series
- 5 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
2.3 NuTiny-SDK-NUC240 PCB Placement
Users can refer to Figure 2-2 for the NuTiny-SDK-NUC240 PCB placements.
Figure 2-2 NuTiny-SDK-NUC240 PCB Placement
- 6 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
3
How to Start NuTiny -SDK-NUC240 on the Keil μVision® IDE
3.1 Keil uVision® IDE Software Download and Install
Please visit the Keil company website (http://www.keil.com) to download the Keil μVision® IDE and install the RVMDK.
3.2 Nuvoton Nu-Link Driver Download and Install
Please visit the Nuvoton company NuMicro™ website (http://www.nuvoton.com/NuMicro ) to download “NuMicro™ Keil
®
μVision IDE driver” file. Please refer to Chapter 6.1 for the detail download flow. When the Nu-Link driver has been
well downloaded, please unzip the file and execute the “Nu-Link_Keil_Driver.exe” to install the driver.
3.3 Hardware Setup
The hardware setup is shown as Figure 3-1
Figure 3-1 NuTiny-SDK-NUC240 Hardware Setup
- 7 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
3.4 Smpl_NuTiny-NUC240 Example Program
This example demonstrates the ease of downloading and debugging an application on a NuTiny-SDK-NUC240 board.
It can be found on Figure 3-2 list directory and downloaded from Nuvoton NuMicro™ website following on Chapter 6.3.
Directory
Project File
Figure 3-2 Smpl_NuTiny_240 Example Directory
To use this example:
The PA.10 LED will toggle on the NuTiny-EVB-NUC240 board.




Start μVision®

Project-Open
Open the Smpl_NuTiny_240.uvproj project file
Project - Build
Compile and link the Smpl_NuTiny-NUC240
application
Flash – Download
Program the application code into on-chip Flash ROM
- 8 -
Start debug mode
Using the debugger commands, you may:

Review variables in the watch window

Single step through code

Reset the device

Run the application
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
4
How to Start NuTiny-SDK-NUC240 on the IAR Embedded Workbench
4.1 IAR Embedded Workbench Software Download and Install
Please connect to IAR company website (http://www.iar.com) to download the IAR Embedded Workbench and install the
EWARM.
4.2 Nuvoton Nu-Link Driver Download and Install
Please connect to the Nuvoton Company NuMicro™ website (http://www.nuvoton.com/NuMicro) to download
“NuMicro™ IAR ICE driver user manual” file. Please refer to Chapter 6.2 for the detail download flow. When the NuLink driver has been well downloaded, please unzip the file and execute the “Nu-Link_IAR_Driver.exe” to install the
driver.
4.3 Hardware Setup
The hardware setup is shown as Figure 4-1
Figure 4-1 NuTiny- SDK-NUC240-100 Hardware Setup
- 9 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
4.4 Smpl_NuTiny-NUC240 Example Program
This example demonstrates the ease of downloading and debugging an application on a NuTiny-SDK-NUC240 board.
It can be found on Figure 4-2 list directory and downloaded from Nuvoton NuMicro™ website following on Chapter 6.3.
Directory
Project File
Figure 4-2 Smpl_NuTiny-NUC240 Example Directory
To use this example:
The PA.10 LED will toggle on the NuTiny-EVB-NUC240 board.

Start IAR Embedded Workbench

File-Open-Workspace
Open the Smpl_NuTiny_240.eww workspace file

Project - Make
Compile and link the Smpl_NuTiny-240 application

- 10 -
Project – Download and Debug
Program the application code into on-chip Flash
ROM.

Single step through code

Reset the device

Run the application
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
5
NuTiny-EVB-NUC240 Schematic
DVCC5
TICEDAT
TICECLK
TICERST
TICEDAT
TICECLK
TICERST
ICERST
ICEDAT
ICECLK
ICERST
ADAVSS
DVCC5
1
2
P75
P74
P73
P72
P71
P70
P69
P68
P67
P66
P65
P64
P63
P62
P61
P60
P59
P58
P57
P56
P55
P54
P53
P52
P51
DAVDD
L1
L0603
HEADER 5X2
L3
ICE INTERFACE
L2
L0603
DVCC5
ADAVSS
C3
20p
DX32O
D12MO
C0603
C4
20p
C5
20p
XTAL-3.4MM-2P
X2
12MHz
D12MO
D12MI
RESET
XTAL3-1
DX32I
D12MI
C0603
C0603
DVCC5
Crystal
DVCC5
DVBUS
DM1
DP1
DVCC5
IO1
KPT-2012
1 KP-2012
R2
500
R0603
HEADER 4
PR1
POWER1
KPT-2012
1 KP-2012
VCC5
VCC
GND
USBDUSBD+
R3
33
R0603
R4
33
R0603
C6
1u
C0603
26
24
22
20
18
16
14
12
10
8
6
4
2
25
23
21
19
17
15
13
11
9
7
5
3
1
P50
P48
P46
P44
P42
P40
P38
P36
P34
P32
P30
P28
P26
HEADER 13X2
500
R0603
DVBUS
D1
NC
1
2
VCC5
J1
RB060L
mini USB 5pin
DM1
DP1
1
2
3
4
5
VCC
DM
DP
NC
GND
SHIELD
SHIELD
SHIELD
SHIELD
L4
6
7
8
9
L0805
DVCC5
R10
0
R0603
USB_MINI_B
1
3
5
7
9
11
13
15
17
19
21
23
25
VCC
CB1
0.1u
C0603
JP8
HEADER 13X2
JP7
P76
P78
P80
P82
P84
P86
P88
P90
P92
P94
P96
P98
P100
CT1
1uF/6.3V
TANT-R
1
3
5
7
9
11
13
15
17
19
21
23
25
2
DVBUS
GND
P49
P47
P45
P43
P41
P39
P37
P35
P33
P31
P29
P27
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
2
1
2
3
4
JP5
USBD+
USBD-
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P10
JP6
JP3
HEADER 13X2
TM1/SPISS11/PB.9
TM2/SPISS01/PB.10
TM3/PMW4/PB.11
T1EX/PWM5/PE.5
PE.6
I2SLRCLK/SPISS00/PC.0
I2SBCLK/SPICLK0/PC.1
I2SDI/SPIMISO00/PC.2
I2SDO/SPIMOSI00/PC.3
SPIMISO01/PC.4
SPIMOSI01/PC.5
TX2/PD.15
RX2/PD.14
CANTX0/PD.7
CANRX0/PD.6
T3EX/SC2CD/CTS0/PB.3
T2EX/RTS0/PB.2
TX0/PB.1
RX0/PB.0
USB_D+
USB_DVDD33
VBUS
PE.7
PE.8
P50
P49
P48
P47
P46
P45
P44
P43
P42
P41
P40
P39
P38
P37
P36
P35
P34
P33
P32
P31
P30
P29
P28
P27
P26
P2
P4
P6
P8
P10
P12
P14
P16
P18
P20
P22
P24
GND
X1
32.768K
ADC5/PA.5/SC1RST
ADC6/PA.6/SC1CLK
ADC7/PA.7/SC1DAT/SPISS21
VREF
AVDD
SPICS20/PD.0
SPICLK2/PD.1
SPIMISO20/PD.2
SPIMOSI20/PD.3
SPIMISO21/PD.4
SPIMOSI21/PD.5
CPN0/PC.7/SC1CD
CPP0/PC.6/SC0CD
CPN1/PC.15
CPP1/PC.14
T0EX/INT1/PB.15
XT_OUT/PF.0
XT_IN/PF.1
/RESET
VSS
VDD
PS2DAT/PF.2
PS2CLK/PF.3
PVSS
CLKO/TM0/PB.8/STADC
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
2
4
6
8
10
12
14
16
18
20
22
24
26
C0603
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
2
4
6
8
10
12
14
16
18
20
22
24
26
P77
P79
P81
P83
P85
P87
P89
P91
P93
P95
P97
P99
GND
P1
P3
P5
P7
P9
P11
P13
P15
P17
P19
P21
P23
P25
C2
20p
L0603
DAVDD
P76
P77
P78
P79
P80
P81
P82
P83
P84
P85
P86
P87
P88
P89
P90
P91
P92
P93
P94
P95
P96
P97
P98
P99
P100
U1 NUC240_LQFP100
25
23
21
19
17
15
13
11
9
7
5
3
1
DVCC5
26
24
22
20
18
16
14
12
10
8
6
4
2
HEADER 2
ICEDAT
ICECLK
ICERST
SC1PWR/ADC4/PA.4
SC0DAT/ADC3/PA.3
SCOCLK/ADC2/PA.2
SCORST/ADC1/PA.1
SC0PWR/ADC0/PA.0
AVSS
VSS
VDD
ICE_CLK
ICE_DAT
SC2DAT/PWM0/PA.12
SC2CLK/PWM1/PA.13
SC2RST/PWM2/PA.14
SC2PWR/I2SMCLK/PWM3/PA.15
MCLK/SPISS10/PC.8
SPICLK1/PC.9
SPIMISO10/PC.10
SPIMOSI10/PC.11
SPIMISO11/PC.12
SPIMISO11/PC.13
PWM6/PE.0
PWM7/PE.1
PE.2
PE.3
PE.4
2
4
6
8
10
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
1
2
1
3
5
7
9
GND
P74
P72
P70
P68
P66
P64
P62
P60
P58
P56
P54
P52
JP2
DVCC5
JP4
P75
P73
P71
P69
P67
P65
P63
P61
P59
P57
P55
P53
P51
HEADER 2
Reset
TANT-A
DVCC5
JP1
ICECLK
ICEDAT
VCC5
RESET
C1
10uF/10V
DX32O
DX32I
R1
10K
R0603
PE.15
PE.14
PE.13
INT0/SPISS1/PB.14
AD1/CPO1/PB.13
VBAT
X32_O
X32_I
CANRX1/I2C1SCL/PA.11
CANTX1/I2C1SDA/PA.10
I2C0SCL/PA.9
I2C0SDA/PA.8
SPISS30/PD.8
SPICLK3/PD.9
SPIMISO30/PD.10
SPIMOSI30/PD.11
SPIMISO31/PD.12
SPIMOSI31/PD.13
RX1/PB.4
TX1/PB.5
RTS1/PB.6
CTS1/PB.7
LDO_CAP
VDD
VSS
SW1
PUSH BOTTOM
SW
HEADER 13X2
Title
Size
A2
Date:
- 11 -
Nuvoton NU_TINY_120
Document Number
Rev
1.0
Monday , July 30, 2012
Sheet
of
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
VCC5
VCC5
R5
10K
R0603
VCC5
ISPLED
2
ICP1
KPT-2012
1 KP-2012
1
3
5
7
NUC_RST#
PVSS
2
4
6
8
8P4RA
TICEDAT
TICECLK
TICERST
GREEN
2
BUSY 1
KPT-2012
1 KP-2012
ICELED
ISPLED
RED
GREEN
VCC5
AVDD
CB2
0.1u
C0603
INT0/PB14
CPO1/PB13
CPO0/PB12
X32I
X32O
I2C1SCL/PA11
I2C1SDA/PA10
I2C0SCL/PA9
I2C0SDA/PA8
RX1/PB4
TX1/PB5
RTS1/PB6
CTS1/PB7
LDO
VDD
VSS
HEADER 5X2
VCC5
R7
1M
R0603
C0603
X3
12MHz
XTAL3-1 C9
20p
12M_I
C0603
PA4/ADC4
PA3/ADC3
PA2/ADC2
PA1/ADC1
PA0/ADC0
AVSS
ICE_CK
ICE_DAT
PA12/PWM0
PA13/PWM1
PA14/PWM2
PA15/PWM3
PC8/SS10
PC9/SPCLK1
PC10/SDI10
PC11/SDO10
NUC12SRE3AN
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
VCC5
ICE_CLK
ICE_DAT
RTCK1
100K
R0603
ADAVSS
TICERST
TICECLK
RTDA2
RTDA3
RTDA1
100K
R0603
RRSET1
100K
R0603
TICEDAT
TICERST
0 1K
R0603
R0603
VCC5
VCC5
VCC5
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
L5
L0603
2
4
6
8
10
C8
20p
R0603
VBUS
VDD33
DD+
PB0/RX0
PB1/TX0
PB2/RTS0
PB3/CTS0
PC3/SDO00
PC2/SDI00
PC1/SPCLK0
PC0/SS00
PE5
PB11/TM3
PB10/SS01/TM2
PB9/SS11/TM1
CT2
10uF/6.3V
TANT-R
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
3
5
7
9
TICEDAT
TICECLK
TICERST
R6
33
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
2
STADC/TM0/PB8
PVSS
VDD1
VSS1
/RESET
XT1_In
XT1_Out
INT1/PB15
CPP1/PC14
CPN1/PC15
CPP0/PC6
CPN0/PC7
AVDD
ADC7/PA7
ADC6/PA6
ADC/PA5
RED
U2
SS24A
RB060L
TANT-A
AVDD
12M_O
IDLE1
KPT-2012
1 KP-2012
D2
JP9
ICE_RST
C7
10uF/10V
NUC_RST#
12M_I
12M_O
2
RP1
8P4R-330
2
GND
ICELED
1
VCC
ICE1
KPT-2012
1 KP-2012
VCC5
ICE CONNECT IF
VCC5
VBUS
ADAVSS
USB_D+
USB_D-
L6
L0603
USBVBUS
R8
33
R0603
USBVBUS
C10
1u
C0603
VCC5
CB3
0.1u
C0603
R9
33
R0603
DM
DP
J2
mini USB 5pin
1
2
3
4
5
VCC
DM
DP
NC
GND
SHIELD
SHIELD
SHIELD
SHIELD
RTIDA1
100K
R0603
HEADER 5
6
7
8
9
USB_MINI_B
1
2
3
4
5
L7
ICE_DAT
ICE_CLK
ICE_RST
RICK1
100K
R0603
DEBUG
JP10
L0805
P5V
OUT
3
2
1
TANT-B
JPR1
P3V
USBVBUS
DM
DP
4
HEADER 3
3
1
2
PD1
USBVBUS SS24A
1
2
IN
GND
OUT
UP1
RT9164A-3.3v
CP1
10uF/10V
RB060L
JP11
1
2
3
4
Title
Nuvoton NU_TINY_120
Size
Document Number
Custom
Rev
1.0
HEADER 4
Date:
- 12 -
Tuesday , May 29, 2012
Sheet
of
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
Download NuMicro™ Family Related Files from Nuvoton Company
6
6.1
Download NuMicro™ Keil μVision® IDE Driver
Step1
™
Visit the Nuvoton NuMicro website: http://www.nuvoton.com/NuMicro
Step2
Click here to enter
Device Driver and
Software Library
- 13 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
Step 3
To download
the file.
Step 4
®
Download the NuMicro Keil μVision IDE driver
- 14 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
6.2
Step1
Download NuMicro™ IAR EWARM Driver
™
Visit the Nuvoton NuMicro website: http://www.nuvoton.com/NuMicro
Step2
Click here to enter
Device Driver and
Software Library
- 15 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
Step 3
To download
the file
Step 4
™
®
Download the NuMicro IAR Embedded Workbench driver
- 16 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
6.3
Download NuMicro™ NUC100 Series BSP Software Library
Step1
™
Visit the Nuvoton NuMicro website: http://www.nuvoton.com/NuMicro
Step2
Click here to enter
Device Driver and
Software Library
Step 3
™
Download the NuMicro NUC200 series software library
- 17 -
Publication Release Date: Sep. 14, 2013
Revision V1.0
NuTiny-SDK-NUC240 User Manual
7
Revision History
Version
Date
Page
Description
1.0
Sep. 14, 2013
--
Initial Release
Important Notice
Nuvoton products are not designed, intended, authorized or warranted for use as components in systems or equipment
intended for surgical implantation, atomic energy control instruments, airplane or spaceship instruments, transportation
instruments, traffic signal instruments, combustion control instruments, or for other applications intended to support or
sustain life. Further more, Nuvoton products are not intended for applications wherein failure of Nuvoton products could
result or lead to a situation wherein personal injury, death or severe property or environmental damage could occur.
Nuvoton customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Nuvoton for any damages resulting from such improper use or sales.
Please note that all data and specifications are subject to change without notice. All the trademarks of products and companies
mentioned in this datasheet belong to their respective owners.
- 18 -
Publication Release Date: Sep. 14, 2013
Revision V1.0