Download Domestic International Common - Harley
Transcript
HARLEY-DAV DSON® SCREAM N’ EAGLE ® PRO RAC NG PARTS 2008 COMPETITION AND PERFORMANCE PARTS FOR THE EXPERIENCED RIDER SCREAM N EAGLE PRO RAC NG PARTS ’ ® RACING PHOTOGRAPHY: KEVIN NETZ – COVER, INTRODUCTION AND AMA MAT T P OLITO – NHRA AND AHDRA WELCOME TO A PLACE WHERE THE STREET ENDS. A PLACE WHERE THE SPIRIT OF TRUE COMPETITION IS TESTED EVERY RACE. WELCOME TO THE WORLD OF SCREAMIN’ EAGLE ® PRO PERFORMANCE PARTS. THIS IS WHERE YOU’LL FIND THE HARDCORE HARLEY ® ENTHUSIASTS; ON THE TRACK, IN THE PITS AND IN THE STANDS. THIS IS THE PLACE WHERE THE PASSION FOR SPEED TAKES HOLD OF PROFESSIONAL AND WEEKEND RACERS ALIKE. SCREAMIN’ EAGLE PRO RACING PARTS ARE BORN OF LEGENDARY HARLEY- DAVIDSON ® QUALITY, AND BACKED BY A CENTURY OF MOTORCYCLE RACING TRADITION. THAT’S WHY WE SUPPORT BOTH PROFESSIONAL AND AMATEUR COMPETITION TODAY. FROM FIELDING CHAMPIONSHIP NHRA ® PRO STOCK MOTORCYCLE DRAG RACING AND AMA ® FLAT TRACK TEAMS, TO SUPPORTING AHDRA ® DRAG RACING WITH SPONSORSHIPS AND CONTINGENCY PRIZES, HARLEY- DAVIDSON BELIEVES IN THE SPIRIT OF TWO - WHEELED COMPETITION. DESIGNED TO RACE. ENGINEERED TO WIN. PREMIUM, PROFESSIONAL- GRADE PERFORMANCE PARTS AND ACCESSORIES FOR MOTORCYCLE RACING ROOTED IN THE SPIRIT AND HERITAGE OF TWO - WHEELED COMPETITION. 01 INTRODUCTION 23 RACE USE EFI PERFORMANCE 40 ENGINES AND ENGINE COMPONENTS 8 4 TOOLS AND ACCESSORIES 13 LEGAL EFI PERFORMANCE 32 INTAKE AND CARBURETION 71 PERFORMANCE E XHAUST 88 INDEX 1 NHRA® POWERADE ® PRO STOCK MOTORCYCLE RAC NG EXPERIENCE THE ULTIMATE IN SIDE - BY - SIDE TWO - WHEELED COMPETITION. THIS ELITE CLASS OF PROFESSIONAL RACING DELIVERS A HIGH OCTANE, HIGH ADRENALINE RUSH LIKE NO OTHER. WITH BLA ZING SPEEDS UP TO 200 MPH, NHRA PRO STOCK MOTORCYCLE DRAG RACING IS THE CULMINATION OF PERFECT TIMING, RAW HORSEPOWER AND FLAWLESS PRECISION. TO FOLLOW THE SCREAMIN’ EAGLE ® / VANCE & HINES FACTORY TEAM, VISIT WWW.NHRA.COM. 2 SCREAMIN’ EAGLE ® PRO RACING AMA® PRO FLAT TRACK RAC NG SOME BATTLES ARE BEST FOUGHT ON THE DIRT. AMA PRO FLAT TRACK RACING BLENDS TRADITION WITH SIGHTS, SOUNDS AND ACTION TO PRODUCE THE BEST IN WHEEL -TO - WHEEL COMPETITION. BALANCED ON A RA ZOR’S EDGE AT SPEEDS UP TO 140 MPH, PURPOSE - BUILT HARLEY- DAVIDSON ® XR -750 - POWERED MOTORCYCLES BATTLE THE COMPETITION IN ONE OF THE MOST EXCITING SPECTATOR SPORTS ON TWO WHEELS. TO FOLLOW THE HARLEY- DAVIDSON FACTORY TEAM, VISIT "FLAT TRACK NEWS" AT HARLEY- DAVIDSON.COM. 4 SCREAMIN’ EAGLE ® PRO RACING AHDRA® SCREAM N’ EAGLE ® N TRO HARLEY ® TOP FUEL RAC NG IF YOUR PASSION FOR RACING BURNS WITH A RICH MIX OF NITRO AND ADRENALINE, YOU’VE FOUND YOUR HOME. THIS PRO CLASS IS SPECIFICALLY RESERVED FOR HARLEY- INSPIRED NITRO BURNING V - T WIN DRAGSTERS. IF YOUR SPIRIT — AND YOUR NERVES — ARE READY FOR ALL OUT DRAG RACING, TAKE A SEAT IN THE STANDS AND WITNESS AT - THE - LIMITS COMPETITION. 6 SCREAMIN’ EAGLE ® PRO RACING AHDRA® SCREAM N’ EAGLE ® V-ROD ® CLASS RAC NG FOR THOSE WHO CAN’T WAIT TO PUSH THEIR WATER - COOLED VRSC MOTORCYCLE TO THE MAX, THIS IS THE FORUM. IN THIS CL ASS IT ’S ALL ABOUT THE H ARL EY - DAV IDSON ® 60 DEGREE, OVERHEAD CAM, RE VOLUTION ® V -T WIN. THE AHDRA V- ROD CLASS IS A HEADS - UP, .400 - SECOND PRO - TREE SERIES THAT RESTRICTS MA JOR MODIFICATIONS FOR EXTREMELY COMPETITIVE ACTION. 7 AHDRA® SCREAM N’ EAGLE ® PERFORMANCE PARTS & SYN3 ® E.T. CLASS RAC NG FROM WEEKEND RIDERS TO PRO RACERS, THESE TWO CLASSES TEST YOUR SKILLS AGAINST SOME OF THE MOST DYNAMIC T WO - WHEELED COMPETITION. SCREAMIN’ EAGLE SYN3 E.T. (ELAPSED TIME) CLASS IT’S G OING TO BE AN ALL - OUT BAT TLE E VERY TIME THIS CLASS GETS TOGETHER. ELIGIBILIT Y IS WIDE OPEN TO STREET LEGAL AND HEAVILY- MODIFIED SINGLE CYLINDER OR V -T WIN MOTORCYCLES, WITH STOCK OR CUSTOM FRAMES. THE FOCUS IS ON CONSISTENT EL APSED -TIME PERFORMANCE, SO DIAL IN THE BIKE, CUT A QUICK LIGHT AND RACE TO MAKE THE FINAL SIXTEEN. 8 SCREAMIN’ EAGLE ® PRO RACING SCREAMIN’ EAGLE PERFORMANCE (SEP) CL ASS BRING A NO - HOLDS - BARRED PASSION FOR RACING. RESERVED FOR STREET LEGAL OR EXTENSIVELYMODIFIED RACE - USE HARLEY - DAVIDSON ® AND BUELL® V -T WIN MOTORCYCLES, SEP ENTRIES REQUIRE FACTORY VIN# ON THE FRAME OR ENGINE. ALL ENTRIES MUST FE ATURE SOME SCREAMIN’ E AGLE PERFORMANCE PARTS, AND HAVE AN 11.50 E.T. DIAL - IN INDEX. 9 SCREAM N’ EAGLE ® PRO RAC NG NFORMAT ON GU DE HORSEPOWER AND TORQUE CAUTION ICONS While many judge a motorcycle’s performance solely in terms of horsepower, GO LIGHT These Screamin’ Eagle products are 50 -state street legal for torque is an equally, if not more, important factor in the equation. In a sale and use on all vehicles, including those that are pollution controlled. nutshell, torque is the twisting force that gets your bike moving, while horsepower is the effort required to keep it moving — meaning that torque influences acceleration and horsepower determines velocity. Your goal should be to reach the balance between horsepower and torque that most closely matches the performance you need. STOPHAND Harley -Davidson motorcycles modified with some performance engine parts must not be used on public roads and in some cases may be restricted to closed-course competition. Those performance parts identified with a stophand symbol are US EPA legal, but are NOT legal for sale or use in California on pollution controlled motor vehicles. California guidelines on WARRANTY AND CAUTION tampering can also lead to substantial fines and penalties. OVERVIEW Harley-Davidson® has the engineering expertise, a sophisticated CROSSED FL AGS Harley-Davidson motorcycles modified with some dyno lab and complete testing facilities to provide enthusiasts with a line (Screamin’ Eagle) performance engine parts must not be used on of performance products designed to produce good, solid, reliable horsepower public roads and in some cases may be restricted to closed-course competition. and torque. Engine related performance parts are intended for the In this Screamin’ Eagle section, all engine -related performance parts experienced rider only. identified with the crossed flags symbol are intended for racing applications only and are not legal for sale or use in California on pollution - controlled WARRANT Y Installation of Screamin’ Eagle ® products, and similar off-road or competition products from other manufacturers, except some street-legal vehicles. Alterations of emission related components constitutes tampering under the US EPA guidelines and can lead to substantial fines and penalties. offerings installed by authorized Harley ® dealers, may void your H-D ® limited vehicle warranty. See your dealer for more information. CALIFORNIA These Screamin’ Eagle products are street legal for sale and use on pollution controlled vehicles in the state of California. Installation of a California performance product onto a 49 -state motorcycle, or a 49 -state performance product onto a California model motorcycle will void Manufacturers warranty, as it will not result in a street-legal configuration. CAUTION Harley-Davidson motorcycles modified with some Screamin’ Eagle high-performance engine parts must not be used on public roads and in some cases may be restricted to closed-course competition. THE DYNO CHART An invaluable tool in performance modification, dyno charts can directly compare, in visual terms, the performance characteristics of a stock configuration with those of a modified configuration — which can help you decide if a particular set-up will generate the power gains you’re after. The horizontal, or “x,” axis indicates engine speed in RPM. The left vertical, or “y,” axis shows the amount of torque generated in foot-pounds, while the right y-axis indicates the horsepower produced. There are four curves in all — one for stock torque, one for modified torque, one for stock horsepower and one for modified horsepower. Each curve can tell you how a configuration performs in a specific RPM range. And it can also tell you where the effects really kick in and where they begin to flatten out. 12 SCREAMIN’ EAGLE ® PRO RACING L EGAL EF PERFORMANCE UNLEASH THE BEAST. Adding a Screamin’ Eagle® Street-Legal Stage Kit with big bore cylinders and matching pistons to your Twin Cam 96 engine is the fastest way to increase your bike’s pulling power. Just look at what’s possible: TWIN CAM 96 STOCK VS. 103CI TWIN CAM 96 STOCK VS. 103CI TWIN CAM 96 STOCK VS. 110CI STAGE I KIT (PAGE 16) STAGE II KIT ( PAGE 15) STAGE I KIT (PAGE 14) 13 A. SCREAMIN’ EAGLE ® STAGE I KIT FOR EFI MODELS – 110 CUBIC INCHES* Bring your Twin Cam motorcycle up to the same displacement and power output as the CVO Screamin’ Eagle® models – a gigantic 1800cc’s. This street legal kit combines all the proven components of the CVO Screamin’ Eagle models – the 4" big-bore forged pistons and cylinders, SE-255 camshafts, and cylinder heads with automatic compression release. The Screamin’ Eagle cylinder heads and forged piston combination offers a 9.3:1 compression ratio for easy starting. The cylinder heads also prominently feature the “Screamin’ Eagle” script. Kits includes all required gaskets (except primary cover and transmission interface gasket) and hardware to complete the installation. Installation requires case boring. Professional installation recommended. Separate purchase of cam spacers is required. See service manual for proper procedure and cam spacer part numbers. Requires separate purchase of appropriate Automatic Compression Release Wiring Harness. Model year ’07 kits are 50-state street legal and model year ’08 kits are 49 state legal (not legal in California) when installed with catalyst mufflers, included in kit. Model year ’08 California kits are street legal on California pollution controlled vehicles when used with Original Equipment California market mufflers. Availability of California 110" kits is pending regulatory approval. All EFI-equipped models require ECM calibration* (priced separately). *Recalibration is required for proper installation, and will allow engine to rev to 5500 RPM. See dealer for details. Labor cost not included. 5 Fits 49-state ’08 Touring models. Kit includes CVO Air Cleaner Back Plate, High Flow Air Cleaner Element and CVO mufflers.* 27800-08 27801-08 Black. Silver. $2,459.95 $2,459.95 5 Fits 49-state ’08 Dyna® models (except FXDF). Kit includes Screamin’ Eagle Air Cleaner and CVO mufflers.* 27802-08 27803-08 Black. Silver. $2,459.95 $2,459.95 5 Fits 49-state ’08 FLSTF models. Kit includes Heavy Breather Air Cleaner and CVO mufflers.* 27804-08 Black. $2,459.95 6 Fits California ’08 Touring models. Availability pending regulatory approval.* 29845-08 29844-08 Silver. Black. $2,295.00 $2,295.00 6 Fits California ’08 Dyna models. Availability pending regulatory approval.* 29909-08 Black. $2,295.00 6 Fits ’08 California Softail® models. Kit includes Heavy Breather Air Cleaner. Availability pending regulatory approval.* 29912-08 Black. $2,295.00 Fits ’07 Touring models. Kit includes CVO back plate, high flow air cleaner element and CVO mufflers.* 29844-07 29845-07 Black. Silver. B Fits ’07 Dyna models. Kit includes Screamin’ Eagle Stage I Air Cleaner and CVO mufflers.* 29909-07 29910-07 Black. Silver. Black. Black. A. SCREAMIN’ EAGLE STAGE I KIT FOR EFI MODELS – 110 CUBIC INCHES (29912-08 SHOWN) (SEE DYNO PERFORMANCE CHART PG.13) B $2,459.95 Fits ’07-later HDI Touring models, ’07-later HDI Dyna models, and ’07-later HDI FLSTF and FXSTD Softail models. Legal on HDI configured models when used with stock exhaust.* 29866-07A B56 $2,459.95 $2,459.95 Fits ’07 Softail FLSTF and FXSTD models. Kit includes Screamin’ Eagle Stage I Air Cleaner and CVO mufflers.* 29912-07 B $2,459.95 $2,459.95 B $2,295.00 When installed by an authorized Harley-Davidson Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. Touring NOTE: Installation of a California performance kit onto a 49 state model motorcycle, or a 49 state performance kit onto a California model motorcycle will void manufacturers warranty, as it will not result in a street legal configuration. 14 EFI STREET LEGAL PERFORMANCE TWIN CAM 96 MODELS A. 49-STATE CVO STYLE CATALYST MUFFLERS Dyna Softail B. SCREAMIN’ EAGLE ® STAGE II KIT FOR EFI MODELS – 103 CUBIC INCHES* The Stage II Big Bore Kit provides the parts you need to increase the horsepower of your EFI-equipped model. The 50-state street legal kit increases the displacement of your Twin Cam-equipped model from 96 cubic inches (1584cc) to 103 cubic inches (1690cc). Includes Stage II (SE-255) cams, 3-7/8" Big Bore cylinders, 3-7/8" Big Bore flat top pistons, clips, and a Stage I Air Cleaner Kit with one-piece back plate, integral breathers, all mounting hardware, and gaskets. Also includes a high performance clutch spring. Separate purchase of cam spacers is required. See manual for proper procedure and cam spacer part numbers. Requires separate purchase of primary cover gasket. Not all components shown. 49-state kits include catalyst mufflers, and California kits are street legal on California pollution controlled vehicles when used with Original Equipment mufflers. All EFI-equipped models require ECM calibration* (priced separately). Regulatory approvals pending for ’08 California kits. *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. 5 Fits 49-state ’08 Touring models. Not street legal in California.* Available August 2007. 27532-08 27533-08 Black. Silver. $1,199.95 $1,199.95 5 Fits 49-state ’08 Dyna® models (except FXDF). Not street legal in California.* 27541-08 27542-08 Black. Silver. $1,199.95 $1,199.95 B Fits ’08 Dyna FXDF models. 50-state street legal.* Available October 2007. 27550-08 Black. $1,199.95 6 Fits California ’08 Softail® models.* Available October 2007. 27543-08 Black. $899.95 6 Fits California ’08 Touring models.* Available October 2007. 27557-08 27558-08 Black. Silver. $899.95 $899.95 6 Fits California ’08 Dyna models (except FXDF).* Available October 2007. 27545-08 Black. $899.95 5 Fits ’07-later FLSTF and FXSTD models with shotgun exhaust. 50-state street legal on ’07 models, 49-state street legal on ’08 models. Kit includes catalyst mufflers.* 29920-07 B56 B. SCREAMIN’ EAGLE STAGE II KIT FOR EFI MODELS – 103 CUBIC INCHES (27543-08 SHOWN) (SEE DYNO PERFORMANCE CHART PG.13) Black. 29921-07 29922-07 Black. Silver. 29924-07 29905-07 29907-07 Black. Black. Silver. Fits ’07 Dyna models. Kit includes catalyst mufflers. 50-state street legal.* 29918-07 29919-07 Black. Silver. Fits ’07 FLSTSC models. Kit includes catalyst mufflers. 50-state street legal.* 29925-07 Softail 5 $1,199.95 $1,199.95 Fits ’07-later FLSTN models. 50-state street legal on ’07 models, 49-state street legal on ’08 models. Kit includes catalyst mufflers.* Fits ’07 Touring models. Kit includes catalyst mufflers. 50-state street legal.* Touring $1,199.95 Fits ’07-later Softail models with shorty dual exhaust. 50-state street legal on ’07 models, 49-state street legal on ’08 models. Kit includes catalyst mufflers.* Black. 5 $1,199.95 B $1,199.95 $1,199.95 B $1,199.95 $1,199.95 B $1,199.95 When installed by an authorized Harley-Davidson Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. NOTE: Installation of a California performance kit onto a 49 state model motorcycle, or a 49 state performance kit onto a California model motorcycle will void manufacturers warranty, as it will not result in a street legal configuration. B. 49-STATE CVO STYLE CATALYST MUFFLERS EFI STREET LEGAL PERFORMANCE 15 TWIN CAM 96 MODELS B A. SCREAMIN’ EAGLE ® STAGE I KIT FOR EFI MODELS – 103 CUBIC INCHES* This Big Bore Kit lets you increase the displacement of your Twin Cam 96-equipped model from 96 cubic inches (1584cc) to 103 cubic inches (1690cc). Includes 3-7/8" Big Bore cylinders, 3-7/8" Big Bore flat top pistons, rings, clips, and a Stage I Air Cleaner Kit with one-piece back plate, integral breathers, all mounting hardware, and gaskets. A high performance clutch spring is included to provide the additional clutch capacity required by the extra power. Requires separate purchase of primary cover gasket. This kit is street legal when used with stock mufflers. (Not all components shown.) All EFI-equipped models require ECM calibration* (priced separately). Regulatory approvals pending for ’08 Dyna and Softail models. *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. Fits ’07 Twin Cam models only.* 29903-07 29904-07 Black. Silver. $639.95 $639.95 Fits ’07 Twin Cam and ’08 Softail® models.* Available October 2007. 29903-07A 29904-07A Black. Silver. $639.95 $639.95 Fits ’08 Dyna® models.* Available October 2007. 27535-08 27536-08 Black. Silver. $639.95 $639.95 Fits ’08 Touring models. 27539-08 27540-08 Black. Silver. $639.95 $639.95 B B. SCREAMIN’ EAGLE STAGE I AIR CLEANER KIT – TWIN CAM MODELS* Kit features a one-piece cast back plate with integral breather and mounting brackets for simplified installation, and a “state of the art” synthetic media washable air cleaner element that does not require oiling. If you want more torque from your Twin Cam-equipped model, this kit provides a freer breathing capability to pump-up the power of your EFI-equipped motorcycle. This kit includes air cleaner, breather, and all required hardware. Street legal when used with stock mufflers. All EFI-equipped models require ECM calibration* (priced separately). *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. 29773-02C Fits ’01-later EFI Softail, ’02-’07 EFI Touring, ’04-’07 EFI Dyna and ’08 Dyna models equipped with Accessory Air Cleaner Covers. (Stock on ’05 FLSTFI 15th Anniversary, ’05-’07 CVO Softails, ’07 CVO Dyna, and ’07 CVO Road King models.) ’06-’07 CVO Electra Glide models require the separate purchase of Air Cleaner Cover P/N 29121-07. $139.95 Air Cleaner Trim is sold separately.* 29406-08 Fits ’08 Dyna models.* $149.95 29260-08 Fits ’08 Touring models with Original Equipment 50mm Throttle Body. ’08 CVO models require separate purchase of Air Cleaner Cover P/N 29121-07.* $139.95 B A. SCREAMIN’ EAGLE STAGE I KIT FOR EFI MODELS – 103 CUBIC INCHES (29903-07A SHOWN) (SEE DYNO PERFORMANCE CHART PG.13) Twin Cam 96 Stock vs. 96ci Stage I Kit (Touring model with 29773-02C shown) When installed by an authorized Harley-Davidson Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. 16 EFI STREET LEGAL PERFORMANCE TWIN CAM 96 MODELS B B. SCREAMIN’ EAGLE STAGE I AIR CLEANER KIT – TWIN CAM MODELS (29773-02C SHOWN) B B. SCREAMIN’ EAGLE STAGE I AIR CLEANER KIT – TWIN CAM MODELS (29406-08 SHOWN) B3 C. SCREAMIN’ EAGLE ® STREET LEGAL “HEAVY BREATHER” PERFORMANCE AIR CLEANER KIT* This high-flow forward facing exposed element Air Cleaner Kit is sure to turn heads at the starting line. Featuring a polished and chrome-plated elbow, this unique Air Cleaner system offers improved performance and air flow when compared to the stock or Screamin’ Eagle High Flow air cleaner. The washable and re-chargeable filter features a bright chrome end cap with a laser-engraved Screamin’ Eagle logo. Intake tube and back plate are made from die cast lightweight aluminum, and are polished and chromeplated for a brilliant finish. The back plate features integral breathers and sealed breather bolt plug. Kit includes a water repellent rain sock and all mounting hardware. All EFI-equipped models require ECM calibration* (priced separately). B3 *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. 29253-08 29299-08 Fits ’08 Touring models. Does not fit models equipped with fairing lower glove boxes.* Street legal when used with original equipment throttle body.* Race application only when used with 58mm Throttle Body P/N 27713-08. $299.95 Available September 2007. Fits ’08 Dyna® and Softail® models.*$299.95 D. SCREAMIN’ EAGLE “HEAVY BREATHER” RAIN SOCK Caught in the rain? This element cover is tailored to provide a perfect fit, decorated with the Screamin’ Eagle Logo. Made from breathable and water resistant material, this cover lets air through while water beads and rolls off your Heavy Breather Air Cleaner element. Don’t get caught without it. 29493-05 Fits models equipped with Heavy Breather Air Cleaner Kits. $19.95 C. SCREAMIN’ EAGLE “HEAVY BREATHER” PERFORMANCE AIR CLEANER KIT – SOFTAIL/DYNA 3 C. SCREAMIN’ EAGLE “HEAVY BREATHER” PERFORMANCE AIR CLEANER KIT – TOURING D. SCREAMIN’ EAGLE “HEAVY BREATHER” RAIN SOCK EFI STREET LEGAL PERFORMANCE 17 TWIN CAM 96 MODELS B A. SCREAMIN’ EAGLE ® STAGE I KIT FOR EFI MODELS – 103 CUBIC INCHES* Bring your Twin Cam 88 motorcycle up to the same displacement and power output as the CVO Screamin’ Eagle® models – a powerful 1690cc. This 50-state street legal kit combines all the proven components of the Screamin’ Eagle models – the 4-3/8" stroker flywheel assembly, 3-7/8" big bore cast pistons, 3-7/8" big bore cylinders, SE-253 camshafts, cylinder heads, air cleaner assembly and cover insert and catalyst mufflers when required. Cam Spacer Kit P/N 25938-00 is recommended. This kit contains an assortment of 5 different spacers to achieve proper sprocket alignment. Individual spacers can be purchased separately. The highlighted Screamin’ Eagle 103 cylinder heads and cast piston combination offers a 9:1 compression ratio for easy starting. The cylinder heads also prominently feature the “Screamin’ Eagle 103” script. Kit includes all required gaskets (except primary cover) and hardware to complete the installation. All models require ECM calibration* (priced separately). *Recalibration is required for proper installation, and will allow engine to rev to 5500 RPM. See dealer for details. Labor cost not included. Fits ’06 EFI Touring models. Kit includes replacement catalyst mufflers. Separate purchase of end caps is required.* 29877-06 29876-06 Black. Silver. $2,995.95 $2,995.95 Fits ’06 EFI FLSTF and FXSTD Softail® models with shotgun exhaust. Kit includes replacement catalyst mufflers.* 29856-06 Black. $2,995.95 Twin Cam 88 ® Stock vs. 103 Stage I Kit (Touring model with 29877-06 shown) CAUTION: Harley-Davidson® EFI systems will not compensate for any component changes. Do not mill heads or increase compression in any way. Do not use cams other than those supplied in the kit. Do not change kit components. Failure to comply may result in engine damage. CAUTION: Dealer installation required – failure to comply may result in a lean fuel condition and severe engine damage. 18 EFI STREET LEGAL PERFORMANCE TWIN CAM 88 MODELS B A. SCREAMIN’ EAGLE STAGE I KIT FOR EFI MODELS – 103 CUBIC INCHES (29877-06 SHOWN) B B. SCREAMIN’ EAGLE ® STAGE II KIT FOR EFI MODELS – 95 CUBIC INCHES* Kit features redesigned cast back plate with integral breather and mounting brackets for simplified installation and an air cleaner element that does not require oiling. This Big Bore Kit provides the parts you need to increase the horsepower of your EFI-equipped model. The kit increases the displacement of your Twin Cam-equipped model from 88 cubic inches (1450cc) to 95 cubic inches (1550cc). Includes Stage II (SE-203) cams, 3-7/8" Big Bore cylinders, 3-7/8" pistons, clips, air cleaner and breather, high performance clutch spring, hardware and gaskets and catalyst mufflers when required. Cam Spacer Kit P/N 25938-00 is recommended (except ’06 Dyna models). This kit contains an assortment of 5 different spacers to achieve proper sprocket alignment. Individual spacers can be purchased separately. Requires separate purchase of primary cover gasket. (Not all components shown.) 50-state street legal when used with stock mufflers. All models require ECM calibration* (priced separately). *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. Fits ’06 Dyna® models. Separate purchase of cam spacers is required (see service manual for proper procedure and Cam Spacer part numbers). Kit includes replacement catalyst mufflers.* 29873-06 29874-06 Black. Silver. $999.95 $999.95 Fits ’06 EFI FLSTF and FXSTD Softail® models with shotgun exhaust. Kit includes replacement catalyst muffler.* 29883-06 Black. $1,049.95 Fits ’06 EFI Softail models with shorty dual exhaust. Kit includes replacement catalyst muffler.* 29881-06 29882-06 Black. Silver. $1,049.95 $1,049.95 Fits ’06 EFI FLSTN Softail models. Kit includes replacement catalyst muffler.* 29884-06 Black. $1,049.95 Fits ’06 EFI FLSTSC Softail models. Kit includes replacement catalyst muffler.* 29885-06 Black. $1,049.95 Fits ’06 EFI FLHT, FLHTC, FLHTCUI and FLHR models. Kit includes replacement catalyst muffler.* 29871-06 29872-06 Black. Silver. $1,049.95 $1,049.95 Fits ’06 EFI FLHRC, FLHRS and FLTR models. Kit includes replacement catalyst muffler.* 29879-06 29886-06 Black. Silver. $1,049.95 $1,049.95 Fits ’06 EFI FLHX models. Kit includes replacement catalyst muffler.* 29880-06 Black. $1,049.95 Fits ’04-’05 EFI Dyna and ’04-’05 Softail (except ’05 FLSTFI 15th Anniversary) models.* 29850-04A Black. $809.95 Twin Cam 88 Stock vs. 95 Stage II Kit (29850-04 shown) B B. SCREAMIN’ EAGLE STAGE II KIT FOR EFI MODELS – 95 CUBIC INCHES EFI STREET LEGAL PERFORMANCE 19 TWIN CAM 88 MODELS B A. SCREAMIN’ EAGLE ® BIG BORE STAGE I KIT FOR EFI MODELS – 95 CUBIC INCHES* Kit features redesigned cast back plate with integral breather and mounting brackets for simplified installation and an air cleaner element that does not require oiling. This Big Bore Kit lets you increase the displacement of your Twin Cam-equipped model from 88 cubic inches (1450cc) to 95 cubic inches (1550cc). Includes 3-7/8" Big Bore cylinders, 3-7/8" pistons, rings, clips, air cleaner and breather, hardware, and gaskets. A high performance clutch spring is included to provide the additional clutch capacity required by the extra power. Requires separate purchase of primary cover gasket. This kit is street legal when used with stock mufflers. (Not all components shown.) All models require ECM calibration* (priced separately). *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. Fits ’01-’06 EFI Softail® (stock on ’05 FLSTFI 15th Anniversary) models, ’02-’06 EFI Touring models and ’04-’06 EFI Dyna® models.* 29774-02B 29860-04A Black. Silver. $639.95 $639.95 Fits ’99-’01 fuel-injected Touring models.* 29491-99C Black. $639.95 Twin Cam 88 Stock vs. 95 Stage I Kit (Touring model with 29774-02B shown) CAUTION: Harley-Davidson® EFI systems will not compensate for any component changes. Do not mill heads or increase compression in any way. Do not use cams other than those supplied in the kit. Do not change kit components. Failure to comply may result in engine damage. CAUTION: Dealer installation required – failure to comply may result in a lean fuel condition and severe engine damage. B A. SCREAMIN’ EAGLE BIG BORE STAGE I KIT FOR EFI MODELS – 95 CUBIC INCHES B B. SCREAMIN’ EAGLE SE-203 CAM KIT Upgrade your 15th Anniversary Fat Boy® model’s 1550cc Twin Cam engine to street-legal Stage II performance levels. The SE-203 cam is designed to provide exceptional low-and midrange torque. Kit includes front and rear cams. Dealer installation is recommended, and special tools are required for proper installation. 50-state street legal when used with stock mufflers. 29791-05 Fits ’05 FLSTFI 15th Anniversary models. $269.95 ECM recalibration is required. B 20 EFI STREET LEGAL PERFORMANCE TWIN CAM 88 MODELS B. SCREAMIN’ EAGLE SE-203 CAM KIT B C. SCREAMIN’ EAGLE ® STAGE I KIT FOR EFI MODELS* Kit features redesigned cast back plate with integral breather and mounting brackets for simplified installation and an air cleaner element that does not require oiling. If you want more torque from your Twin Cam 88-equipped model, this kit provides a freer breathing capability to pump-up the power of your EFI-equipped motorcycle. This kit includes air cleaner, breather, and all required hardware. Street legal when used with stock mufflers. All models require ECM calibration* (priced separately). Twin Cam 88 Stock vs. 88 Stage I Kit (Touring model with 29773-02C shown) *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. When installed by an authorized Harley-Davidson Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. 29773-02C B 29489-99C Fits ’01-later EFI Softail®, ’02-’07 EFI Touring, ’04-’07 EFI Dyna® and ’08 Dyna models equipped with Accessory Air Cleaner Covers. (Stock on ’05 FLSTFI 15th Anniversary, ’05-’07 CVO Softail, ’07 CVO Dyna, and ’07 CVO Road King® models.) ’06-’07 CVO Electra Glide® models require the separate purchase of Air Cleaner Cover P/N 29121-07. Air Cleaner $139.95 Trim is sold separately.* Fits ’99-’01 fuel-injected $139.95 Touring models.* B D. SCREAMIN’ EAGLE EVOLUTION ® 1340 EFI STAGE I PERFORMANCE KIT** This 50-state street legal kit increases torque throughout the RPM range, with a 15% increase at the peak. Stage I Kit includes air cleaner and breather kit, and all required hardware. This kit is designed to work with Harley-Davidson® Genuine Accessory Performance Mufflers P/N 65259-00, but will also work with stock mufflers. All models require ECM calibration* (priced separately). C. SCREAMIN’ EAGLE STAGE I KIT FOR EFI MODELS Evolution 1340 Stock vs. Stage I EFI (Touring model with 29387-97B shown) **Recalibration is required for proper installation, and will allow engine to rev to 6000 RPM. See dealer for details. Labor cost not included. 29387-97B Fits ’97-’98 Evolution 1340-equipped EFI models only. Also fits ’95-’96 Evolution 1340-equipped EFI models when used with ECM P/N 32423-97B. (Does not fit $119.95 Twin Cam-equipped models.)** B E. SCREAMIN’ EAGLE PERFORMANCE AIR CLEANER FOR VRSC™ MODELS This high flow air cleaner provides the clean stable air the engine needs for maximum performance. The washable filter element does not require oiling. 29793-02C Fits ’02-later VRSC™ models. $64.95 B D. SCREAMIN’ EAGLE EVOLUTION 1340 EFI STAGE I PERFORMANCE KIT B E. SCREAMIN’ EAGLE PERFORMANCE AIR CLEANER FOR VRSC MODELS CAUTION: Harley-Davidson® EFI systems will not compensate for any component changes. Do not mill heads or increase compression in any way. Do not use cams other than those supplied in the kit. Do not change kit components. Failure to comply may result in engine damage. EFI STREET LEGAL PERFORMANCE 21 TWIN CAM 88/EVOLUTION/VRSC MODELS B A. SCREAMIN’ EAGLE ® SPORTSTER ® 883CC TO 1200CC STAGE I CONVERSION KIT* This complete conversion kit will alter the personality of your 883-equipped Sportster model. Designed to bring your XL883 model up to XL1200 specifications, this kit includes Sportster Stage I Air Cleaner Kit, XL1200 Cylinder Heads, and XL1200 Cylinders and Pistons. Kit includes black highlighted cylinders and cylinder heads. No case machining is required for installation. Street legal when used with stock mufflers. All models require ECM calibration (priced separately). *Recalibration is required for proper installation, and will allow engine to rev to 7000 RPM. See dealer for details. Labor cost not included. 29784-07 Black. Fits ’07-’08 XL883 models.* $1,199.95 B B. SCREAMIN’ EAGLE SPORTSTER STAGE I AIR CLEANER KIT* The XL Stage I Air Cleaner Kit provides increased airflow to boost the power of your fuel injected Sportster model. The complete kit features a composite air cleaner back plate, air cleaner cover adapter, a high-flow washable synthetic media filter element that does not require oiling, and a breather system that routes gasses and excess oil directly into the intake. Kit also includes cover trim, and all mounting hardware. Street legal when used with stock mufflers. All models require ECM calibration (priced separately). *Recalibration is required for proper installation, and will allow engine to rev to 7000 RPM. See dealer for details. Labor cost not included. 29782-07 Fits ’07-’08 XL models.* $139.95 Sportster 1200 Stock vs. 1200 Stage I Kit (P/N 29782-07 shown with SE Performance Mufflers) B C. SCREAMIN’ EAGLE STREET LEGAL “HEAVY BREATHER” PERFORMANCE AIR CLEANER KIT* This high-flow forward facing exposed element Air Cleaner Kit is sure to turn heads at the starting line. Featuring a polished and chrome-plated elbow, this unique Air Cleaner system offers improved performance and air flow when compared to the stock or Screamin’ Eagle High Flow air cleaner. The washable and re-chargeable filter features a bright chrome end cap with a laser-engraved Screamin’ Eagle logo. Intake tube and back plate are made from die cast lightweight aluminum, and are polished and chromeplated for a brilliant finish. The back plate features integral breathers and sealed breather bolt plug. Kit includes a water repellent rain sock and all mounting hardware. All EFI-equipped models require ECM calibration* (priced separately). B A. SCREAMIN’ EAGLE SPORTSTER 883CC TO 1200CC STAGE I CONVERSION KIT *Recalibration is required for proper installation, and will allow engine to rev to 7000 RPM. See dealer for details. Labor cost not included. 29264-08 Fits ’08 XL models.* $299.95 When installed by an authorized Harley-Davidson Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. 22 EFI STREET LEGAL PERFORMANCE SPORTSTER MODELS B B. SCREAMIN’ EAGLE SPORTSTER STAGE I AIR CLEANER KIT C. SCREAMIN’ EAGLE “HEAVY BREATHER” PERFORMANCE AIR CLEANER KIT RACE USE EF PERFORMANCE INJECT SOME MUSCLE Despite what you may be thinking, Electronic Fuel Injection (EFI) isn’t as complicated as it sounds. On the race track, you need to move more air and more fuel through the engine. And with Screamin’ Eagle ® Pro racing parts, you have a wide range of options that allow you to produce the specific kind of track performance you’re looking for. TEAR UP T HE T RACK. Screamin’ Eagle ® Pro Big Bore Stage Kits with system-matched components take the guess-work out of building a race-ready engine. Pick how big you want to go, and the available Race -Tuner EFI Calibrations will help you dial in the performance. T WIN CAM 96 STOCK VS. SE PRO 103CI T WIN CAM 96 STOCK VS. SE PRO 110CI T WIN CAM 96 STOCK VS. SE PRO 113CI STAGE II KIT (PAGE 26) STAGE II KIT (PAGE 26) STAGE II KIT (PAGE 26) 23 EFI TWIN CAM SCREAMIN’ EAGLE PERFORMANCE CONFIGURATIONS ® 3 CROSSED FLAGS: Harley-Davidson® motorcycles modified with some (Screamin’ Eagle) performance engine parts must not be used on public roads and in some cases may be restricted to closed-course competition. In this Screamin’ Eagle section, all engine-related performance parts identified with the crossed flags symbol are intended for racing applications only and are not legal for sale or use in California on pollutioncontrolled vehicles. Alterations of emission related components constitutes tampering under the US EPA guidelines and can lead to substantial fines and penalties. These configurations are not legal for sale or use in California on any pollution-controlled motor vehicle. Intended for closed course competition only. May void limited vehicle warranty. EFI TWIN CAM 88 STOCK VS. 1550 STAGE II KIT To build your own race motor, see the page number listed and order the part number specified for your year and model motorcycle. Free Flowing Mufflers EFI TWIN CAM 88 STOCK VS. 1550 STAGE II KIT WITH HEADS 3 3 Big-Bore Stage II Kit Page 28 Big-Bore Stage II Kit Page 28 Twin Cam Performance Heads Page 48 Free Flowing Mufflers Corrected torque and horsepower measured at rear wheel on a Dynojet® Dynamometer. Your results may vary. EFI TWIN CAM 88/96 STOCK VS. 103 C.I. SUPER HIGH OUTPUT EFI TWIN CAM 88/96 STOCK VS. 103 C.I. HIGH OUTPUT 3 3 Air Cleaner and Breather Kit Page 29 Air Cleaner and Breather Kit Page 29 Big Bore Cylinders Page 46 Page 46 Twin Cam Performance Heads Page 48 Flat Top Stroker Pistons Page 51 Big Bore Cylinders 103+ Cylinder Head Kit 103+ Stroker Piston Kit SE-258 Cam Page 57 SE-257 Cam Kit Page 57 24 SCREAMIN’ EAGLE ® PRO RACING PERFORMANCE CONFIGURATIONS Page 51 Free Flowing Mufflers Free Flowing Mufflers Twin Cam 88 models also require: Stroker Flywheel and Rod Assy. Page 47 Page 45 Twin Cam 88 models also require: Stroker Flywheel and Rod Assy. Page 45 EFI TWIN CAM 88 STOCK VS. 1550 HIGH OUTPUT EFI TWIN CAM 88 STOCK VS. 1550 HIGH TORQUE 3 3 Air Cleaner and Breather Kit Page 29 Air Cleaner and Breather Kit Big Bore Cylinders Page 46 HTCC EFI Intake Manifold Kit Twin Cam Performance Heads Page 48 Big Bore Cylinders High Compression Forged Pistons Page 52 HTCC Cylinder Head Kit SE-257 Cam Kit Page 57 HTCC Pistons Page 63 SE-251 Cam Kit Quick-Install Adjustable Pushrods EFI TWIN CAM 88 STOCK VS. 1550 WITH 50MM THROTTLE BODY 3 Air Cleaner and Breather Kit Page 29 50MM EFI Throttle Body Page 28 Big Bore Cylinders Page 46 See Dealer Ported HTCC Cylinder Head Kit Page 47 See Dealer HTCC Forged Pistons Page 51 SE-251 Cam Kit Page 56 Perfect-Fit Push Rods – std. Page 62 Page 29 See Dealer Page 46 Page 56 Free Flowing Mufflers Free Flowing Mufflers Free Flowing Mufflers EFI TWIN CAM 88/96 STOCK VS. 103 C.I. WITH 50MM EFI AND 103 + HEADS EFI TWIN CAM 88/96 STOCK VS. 103 C.I. WITH 50MM EFI AND PORTED HTCC HEADS EFI TWIN CAM 88/96 STOCK VS. 113 C.I. HIGH OUTPUT 3 3 3 Air Cleaner and Breather Kit Page 29 Air Cleaner and Breather Kit Page 29 Air Cleaner and Breather Kit Page 29 50MM EFI Throttle Body Page 28 50MM EFI Throttle Body Page 28 50MM EFI Throttle Body Page 28 Big Bore Cylinders 103+ Cylinder Head Kit 103+ Pistons Page 46 Big Bore Cylinders Page 46 Page 46 Page 47 Ported HTCC Cylinder Head Kit Page 47 Bigger Bore 4.060" Cylinders 103+ Cylinder Head Kit Page 51 HTCC Forged Pistons Page 51 103+ Pistons Page 49 SE-264 Cam Kit Page 57 SE-260 Cam Kit Page 57 SE-264 Cam Kit Page 63 Perfect-Fit Push Rods +.030 Page 62 Free Flowing Mufflers Free Flowing Mufflers Twin Cam 88 models also require: Stroker Flywheel and Rod Assy. Twin Cam 88 models also require: Stroker Flywheel and Rod Assy. Page 47 Free Flowing Mufflers Page 45 Twin Cam 88 models also require: Stroker Flywheel and Rod Assy. Page 45 Page 45 SCREAMIN’ EAGLE ® PRO RACING 25 PERFORMANCE CONFIGURATIONS 3 A. SCREAMIN’ EAGLE ® PRO STAGE II KIT FOR EFI MODELS – 113 CUBIC INCHES* When winning at the track matters, this kit provides the biggest displacement combination of precision engineered genuine Screamin’ Eagle components available. Kit includes 4.060" “Bigger Bore” cylinders, high compression 4.060" forged pistons, CVO-style cylinder heads (used on the 110" power train) featuring automatic compression release and upgraded with Screamin’ Eagle race valve springs, perfect fit pushrods, SE-264 high lift cams, performance clutch spring, a high performance flywheel output shaft roller bearing, and all required gaskets. Add your choice of a Screamin’ Eagle Pro Air Cleaner kit, either the Heavy Breather or the High Flow, to complete your racing machine. This set-up will leave your competition in the dust. All EFI-equipped models require ECM calibration (priced separately). Separate purchase of cam spacers is required. See service manual for proper procedure and cam spacer part numbers. For race application only. Fits all ’07 Twin Cam and ’08 Softail® and Touring models. Cannot be installed on 110ci CVO models, or any Twin Cam models previously upgraded to a 110ci motor. Requires separate purchase of model-specific Automatic Compression Release Wiring Harness Kit. 27525-08 27526-08 Black. Silver. $2,495.00 $2,495.00 Fits ’08 Dyna® Twin-Cam models. Cannot be installed on 110ci CVO models, or any Twin Cam models previously upgraded to a 110ci motor. Requires separate purchase of Compression Release Wiring Harness Kit P/N 70623-06. 27559-08 27561-08 Black. Silver. Also available: (not shown) $2,495.00 $2,495.00 3 SCREAMIN’ EAGLE PRO STAGE II KIT FOR EFI MODELS – 110 CUBIC INCHES* Big displacement that gets results on the track. This raceuse Stage II performance kit produces 110 cubic inches (1800cc) of unbridled performance that will keep you at the front of the pack. The component-matched kit features CVO-style cylinder heads with automatic compression release, 4" big-bore cylinders, unique high-compression (10.5:1) 4" forged pistons, rings and pins, SE-260 highlift cams, Screamin’ Eagle® pushrods, performance clutch spring, a high performance flywheel output shaft roller bearing, and all required gaskets. Take advantage of the free-breathing heads and big displacement by adding a big bore throttle body, and a Screamin’ Eagle Heavy Breather or Screamin’ Eagle High Flow Air Cleaner kit (sold separately). All EFI-equipped models require ECM calibration (priced separately). Separate purchase of Cam Spacers is required. See service manual for proper procedure and Cam Spacer part numbers. For race application only. 3 A. SCREAMIN’ EAGLE PRO STAGE II KITS FOR EFI MODELS – 113 AND 110 CUBIC INCHES (SEE DYNO PERFORMANCE CHARTS PG.23) Fits all ’07 Twin Cam models, and ’08 Softail and Touring models. Requires separate purchase of model-specific Automatic Compression Release Wiring Harness Kit. 29931-08 29932-08 Black. Silver. $2,295.00 $2,295.00 Fits ’08 Dyna Twin Cam models. Requires separate purchase of Automatic Compression Release Wiring Harness Kit P/N 70623-06. 27562-08 27563-08 Black. Silver. $2,295.00 $2,295.00 3 B. SCREAMIN’ EAGLE PRO STAGE II KIT FOR EFI MODELS – 103 CUBIC INCHES* The Stage II Big Bore Kit provides the parts you need to improve the track performance and horsepower of your EFI-equipped model. The kit increases the displacement of your Twin Cam-equipped model from 96 cubic inches (1584cc) to 103 cubic inches (1690cc). Kit includes Stage II (SE-255) cams, 3-7/8" Big Bore cylinders, 3-7/8" Big Bore flat top pistons a high performance clutch spring, and all mounting hardware and gaskets. Just add your choice of a Screamin’ Eagle High Flow or Heavy Breather Air Cleaner (sold separately) for maximum track performance. Requires separate purchase of primary cover gasket. Not all components shown. All EFI-equipped models require ECM calibration* (priced separately). Separate purchase of cam spacers is required. See service manual for proper procedure and cam spacer part numbers. For race application only. Fits ’07-later Twin Cam models. 29893-07A 29894-07A Black. Silver. $759.95 $759.95 *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. 26 EFI RACE USE PERFORMANCE TWIN CAM 96 MODELS 3 B. SCREAMIN’ EAGLE PRO STAGE II KIT FOR EFI MODELS – 103 CUBIC INCHES (SEE DYNO PERFORMANCE CHART PG.23) 3 C. SCREAMIN’ EAGLE ® PRO HIGH FLOW 58MM EFI THROTTLE BODY* The biggest engines deserve the most fuel. This huge 58mm Throttle Body (8mm or 16% larger than stock) won’t leave your engine starving for more fuel. The one-piece throttle body features Electronic Throttle Control technology, new for ’08 Touring models. Just add your stock injectors or the Screamin’ Eagle Pro High Flow Injector Kit P/N 27796-08 (sold separately). Stock injectors are recommended for engines making up to 100 rear wheel horsepower, Screamin’ Eagle High Flow injectors are recommended for engines creating greater than 100 rear wheel horsepower. All EFI-equipped models require ECM calibration* (sold separately). For race application only. 27713-08 Fits ’08 Touring models. $399.95 3 D. SCREAMIN’ EAGLE PRO HIGH FLOW INJECTOR KIT – 58MM THROTTLE BODY* Larger, high flow injectors fit with Screamin’ Eagle Pro 58mm Touring Throttle Body P/N 27713-08. Injectors provide fuel delivery at the rate of 5.3 grams/second, 23% more than Original Equipment injectors. Recommended for use with engine configurations making more than 100 rear wheel horsepower. All EFI-equipped models require ECM calibration* (sold separately). For race application only. 3 27796-08 Fits ’08 Touring models equipped with Screamin’ Eagle 58mm Throttle Body P/N 27713-08. $139.95 3 E. SCREAMIN’ EAGLE PRO AIR CLEANER AND BREATHER KITS* The die-cast back plate and high-flow “state-of-the-art” synthetic media washable air filter provide large volumes of clean, stable air to the engine. The crankcase breather system utilizes individual breather hoses that direct the breather gases into the mouth of the carburetor, or EFI induction module, to minimize excess oil in the system. Kit includes all required hardware and installation instructions. All EFI-equipped models require ECM calibration* (priced separately). For race application only. C. SCREAMIN’ EAGLE PRO HIGH FLOW 58MM EFI THROTTLE BODY 29515-08 Fits ’08 Touring models equipped with Screamin’ Eagle 58mm Throttle Body P/N 27713-08. $149.95 3 F. SCREAMIN’ EAGLE PRO 50MM EFI THROTTLE BODY* Higher flowing for larger displacement race engine applications. Includes fully assembled throttle body and unique intake flanges and seals. This big bore throttle body features a 50mm throttle plate (a 4mm increase over the ’06 Original Equipment throttle body) to provide increased airflow, and more power. Higher flow rate injectors provide 25% more fuel to complement the increased airflow. Sensors, injectors, and the IAC stepper motor are fully assembled on this bolt-on unit. All EFI-equipped models require ECM calibration* (priced separately). For race application only. 27623-05 3 D. SCREAMIN’ EAGLE PRO HIGH FLOW INJECTOR KIT – 58MM THROTTLE BODY 3 $399.95 E. SCREAMIN’ EAGLE PRO AIR CLEANER AND BREATHER KITS 3 F. SCREAMIN’ EAGLE PRO 50MM EFI THROTTLE BODY (SEE DYNO PERFORMANCE CHARTS PG.25) Fits ’06-later Twin Cam EFI models (except ’08 Touring) equipped with accessory performance cylinder heads. *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. EFI RACE USE PERFORMANCE 27 TWIN CAM 96 MODELS 3 A. SCREAMIN’ EAGLE ® PRO STAGE II KIT FOR EFI MODELS – 95 CUBIC INCHES* When stock cams just won’t do. This Big Bore Kit provides the parts you need to increase the horsepower of your EFIequipped model. The kit increases the displacement of your ’99-’06 Twin Cam 88® from 88 cubic inches (1450cc) to 95 cubic inches (1550cc). Includes Stage II (SE203) cams, 3-7/8" cylinders, 3-7/8" pistons, clips, air cleaner and breather, high performance clutch spring, hardware and gaskets. Requires separate purchase of primary cover gasket and Air Cleaner Trim Ring. (Not all components shown.) All EFI-equipped models require ECM calibration* (priced separately). For race application only. Fits ’01-’06 EFI Softail® models, ’02-’06 EFI Touring models and ’04-’05 EFI Dyna® models. 29859-04A 29775-02B Silver. Black. $809.95 $809.95 Fits ’99-’01 fuel-injected Touring models. ’99 models require Splined Cam Sprocket P/N 25716-99. 29492-99C Black. $809.95 Fits ’06 EFI Dyna models. 29890-06 29891-06 Black. Silver. $849.95 $849.95 NOTE: Separate purchase of Cam Spacer Kit P/N 2593800 is recommended for ’99-’06 Touring, ’01-’06 Softail and ’04-’05 Dyna models. This kit contains five different spacers to achieve proper sprocket alignment. Individual spacers can be purchased separately. For ’06 Dyna models, see service manual for proper procedure and Cam Spacer part numbers. 3 B. SCREAMIN’ EAGLE PRO 50MM EFI THROTTLE BODY* Higher flowing for larger displacement race engine applications. Includes fully assembled throttle body and unique intake flanges and seals. This big bore throttle body features a 50mm throttle plate (a 4mm increase over the ’06 Original Equipment throttle body) to provide increased airflow, and more power. Higher flow rate injectors provide 25% more fuel to complement the increased airflow. Sensors, injectors, and the IAC stepper motor are fully assembled on this bolt-on unit. All EFI-equipped models require ECM calibration* (priced separately). For race application only. 27623-05 Fits ’06-later Twin Cam EFI models (except ’08 Touring) equipped with accessory performance cylinder heads. $399.95 3 C. SCREAMIN’ EAGLE PRO “HEAVY BREATHER” PERFORMANCE AIR CLEANER KIT* This high-flow forward facing exposed element Air Cleaner Kit is sure to turn heads at the starting line. Featuring a polished and chrome-plated elbow, this unique Air Cleaner system offers improved performance and air flow when compared to the stock or Screamin’ Eagle High Flow air cleaner. The washable and rechargeable filter features a bright chrome end cap with a laser-engraved Screamin’ Eagle logo. Intake tube and back plate are made from die cast lightweight aluminum, and are polished and chromeplated for a brilliant finish. The back plate features integral breathers and sealed breather bolt plug. Kit includes a water repellent rain sock and all mounting hardware. All EFI-equipped models require ECM calibration* (priced separately). For race application only. 29592-05 29253-08 29789-05 3 A. SCREAMIN’ EAGLE STAGE II KIT FOR EFI MODELS – 95 CUBIC INCHES (SEE DYNO PERFORMANCE CHART PG.24) Fits ’99-later Twin Cam models (except models equipped with fairing lowers and ’99-’01 and $299.95 ’08-later Touring models). Fits ’08 Touring models. Does not fit models equipped with fairing lower glove boxes. Street legal when used with original equipment throttle body. Race application only when used with 58mm Throttle Body P/N 27713-08. $299.95 Available September 2007. Fits ’91-later XL models. $299.95 *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. 28 EFI RACE USE PERFORMANCE TWIN CAM 88 MODELS 3 3 B. SCREAMIN’ EAGLE PRO 50MM EFI THROTTLE BODY (SEE DYNO PERFORMANCE CHARTS PG.25) C. SCREAMIN’ EAGLE “HEAVY BREATHER” PERFORMANCE AIR CLEANER KIT – TOURING D. SCREAMIN’ EAGLE ® “HEAVY BREATHER” RAIN SOCK Caught in the rain? This element cover is tailored to provide a perfect fit, decorated with the Screamin’ Eagle Logo. Made from breathable and water resistant material, this cover lets air through while water beads and rolls off your Heavy Breather Air Cleaner element. Don’t get caught without it. 29493-05 Fits models equipped with Heavy Breather Air Cleaner Kits. $19.95 3 E. SCREAMIN’ EAGLE PRO AIR CLEANER AND BREATHER KITS FOR TWIN CAM EQUIPPED MODELS The die-cast back plate and high-flow, washable air filter provide large volumes of clean, stable air to the engine. The crankcase breather system utilizes individual breather hoses that direct the breather gases into the mouth of the carburetor, or EFI induction module, to minimize excess oil in the system. Kit includes all required hardware and installation instructions. All EFI-equipped models require ECM calibration* (priced separately). For race application only. *Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM. See dealer for details. Labor cost not included. 29440-99D D. SCREAMIN’ EAGLE “HEAVY BREATHER” RAIN SOCK 29441-99A 29515-08 Fits ’00-later Softail®, ’99-’07 Touring (except ’99-’01 EFI models), and ’99-’07 Dyna® models. Also fits ’08 Dyna models equipped with accessory air cleaner covers. Fits EFI models and carbureted models with original equipment CV, Screamin’ Eagle CV (except CV51mm Super Bore), and Flatslide carburetors. ’06-’07 CVO Electra Glide models require separate purchase of Air Cleaner Cover P/N 29121-07. Air cleaner trim sold separately. Stock on ’05 15th Anniversary FLSTF, ’05-’07 CVO Softail, ’07 CVO Dyna, and ’07 CVO Road King® models. $139.95 Fits ’99-’01 EFI Touring $139.95 models. (not shown) Fits ’08 Touring models equipped with Screamin’ Eagle 58mm Throttle $149.95 Body P/N 27713-08. 3 F. SCREAMIN’ EAGLE PRO EVOLUTION 1340 EFI HIGH FLOW AIR CLEANER AND BREATHER KIT* This kit provides 15% more air flow over stock. For race application only. 29364-97 Fits ’95-’98 Evolution 1340-equipped EFI models only. ’95-’96 models require installation of ECM P/N 32423-97B to allow required recalibration $119.95 (sold separately). *CAUTION: Installation of this kit requires jetting or recalibration for proper function. Failure to do so may cause a lean fuel condition which may result in engine damage. 3 E. SCREAMIN’ EAGLE PRO AIR CLEANER AND BREATHER KITS FOR TWIN CAM EQUIPPED MODELS 3 F. SCREAMIN’ EAGLE PRO EVOLUTION 1340 EFI HIGH FLOW AIR CLEANER AND BREATHER KIT 3 G. SCREAMIN’ EAGLE PRO HIGH-FLOW AIR CLEANER KIT FOR SPORTSTER ® MODELS This air cleaner kit provides increased air flow when used with stock, or Screamin’ Eagle carburetors. It includes a composite back plate, an air cleaner cover adapter, and a high flow, washable element that does not require oiling. In addition, the breather system has been redesigned to route breather gases directly into the inlet of the carburetor to minimize excess oil in the air cleaner assembly. Kit includes air cleaner element, back plate, air cleaner cover adapter, air cleaner trim, and all necessary installation accessories. All EFI-equipped models require ECM calibration* (priced separately). For race application only. *Recalibration is required for proper installation, and will allow engine to rev to 7000 RPM. See dealer for details. Labor cost not included. 29042-04B 29066-03A Fits ’04-later XL models with stock air cleaner cover. Harley-Davidson® Air Cleaner Cover P/N 29792-04 requires separate purchase of $139.95 Adapter Kit P/N 29848-04. Fits ’88-’03 XL models. $139.95 3 G. SCREAMIN’ EAGLE SPORTSTER STAGE I AIR CLEANER KIT EFI RACE USE PERFORMANCE 29 TWIN CAM/EVOLUTION/SPORTSTER MODELS 3 A. SCREAMIN’ EAGLE ® PRO VRXSE DESTROYER™ BIG BORE THROTTLE BODY KIT This bolt-on kit boasts a 58mm throttle body, compared to 53mm stock throttle body. Can be used with stock injectors or with VRXSE Performance Injector Kit P/N 27791-05. Recalibration required through EFI Race Tuner only. For race application only. 27670-05 Fits ’02-later VRSC models. $499.95 3 B. SCREAMIN’ EAGLE PRO VRXSE DESTROYER PERFORMANCE INJECTOR KIT This performance injector kit features 6-hole, twin jet injectors that flow 30% more fuel, compared to stock injectors. Recalibration required through EFI Race Tuner only. For race application only. 27791-05 Fits ’02-later VRSC™ models equipped with P/N 27670-05 Destroyer $299.95 Big Bore Throttle Body Kit. B C. SCREAMIN’ EAGLE PERFORMANCE AIR CLEANER FOR VRSC™ MODELS This high flow air cleaner provides the clean stable air the engine needs for maximum performance. The washable filter element does not require oiling. 29793-02C Fits ’02-later VRSC models. Also available: (not shown) $64.95 3 AIR TEMP SENSOR RELOCATION KITS These kits are required for intake air temperature sensor relocation on vehicles without air box cover. For race application only. 29540-03 29541-03 Fits ’02 VRSC models. Fits ’03 VRSC models. $44.95 $1.99 3 A. VRXSE DESTROYER BIG BORE THROTTLE BODY KIT 3 30 EFI RACE USE PERFORMANCE VRSC MODELS B. VRXSE DESTROYER PERFORMANCE INJECTOR KIT B C. SCREAMIN’ EAGLE PERFORMANCE AIR CLEANER FOR VRSC MODELS 3 D. SCREAMIN’ EAGLE ® PRO EFI RACE TUNER This race-use only software package is a great product for making tuning adjustments to your fuel-injected HarleyDavidson® racer and has much greater capabilities than most competitive EFI tuning products. The EFI Race Tuner software is divided into two modes. Tuning Mode, which allows you to tune certain variables of the EFI system, and Data Mode, which can record and display real-time vehicle data. It can then graphically represent the tuning changes that have been made. This is exactly what racers of EFI-equipped Harley-Davidson motorcycles have been asking for…a way to tune their vehicle for ever-changing track conditions and performance product combinations. Data Mode can even produce horsepower and torque charts based upon the recorded data from your last run down the drag strip. The software is capable of monitoring up to 28 variables, and with such sophistication, it is the ultimate tool for tuning and gaining that edge on the track. Performance is the key and this product comes complete with many race-use Screamin’ Eagle calibrations, which may be downloaded and tuned to maximize the horsepower and torque of your EFI racer. The complete kit includes the tuning software on a CD and a communications interface that electronically locks to the ECM. The required cables to connect to a PC and the vehicle are sold separately. The software also contains an electronic User’s Manual that explains the Harley-Davidson EFI system and the EFI Race Tuner’s capabilities. This manual can be referred to as you are tuning on the track or in the pits. Installation and effective tuning requires a high degree of skill and therefore dealer installation is required. Minimum PC requirements are Windows 98, CD ROM drive, serial port, 32 MB RAM, and 10 MB hard drive space. Not compatible with Windows Vista operating system. For race application only. Available September 2007. D. SCREAMIN’ EAGLE PRO EFI RACE TUNER 32107-01H 32127-03A Fits ’02-’08 EFI Touring models and ’01-’08 EFI VRSC™, XL, $459.95 Dyna® and Softail® models. Fits ’97-’01 EFI Touring models. Also fits ’95-’96 EFI Touring models when used with ECM P/N 32423-97B $459.95 (sold separately). Also available: (not shown) 3 EFI RACE TUNER CABLE KIT 32108-06 For use with Screamin’ Eagle EFI Race Tuner Kit P/N 32107-01F and 32127-03A. Kit includes two cables: bike to interface $29.95 and interface to computer cables. 3 3 D. SCREAMIN’ EAGLE PRO EFI RACE TUNER E. SCREAMIN’ EAGLE PRO EFI RACE FUELER Tune the fuel flow on your EFI bike. The tuner can electronically add fuel in much the same manner as increasing jet size on a carbureted system. It allows for quick tuning for the addition of less restrictive, free flowing intake and exhaust systems. The Fueler offers “bands” of adjustment that take into account operating ranges, such as idle, acceleration, and steady speed. The Fueler is a self-contained unit that requires no computer interface. Adjustments are made by setting fuel, RPM and accelerator pump potentiometers, with changes monitored on LED indicators. Race Fueler can be adjusted to add additional fuel for ’96-’04 models, and add or subtract fuel on ’05-later models. The compact unit is designed for “plug-in” installation and remains on the bike for convenient tuning. Tuner affects fuel delivery only and cannot change rev limit or spark timing. For race application only. 32132-04 32136-05A 32136-06A 32173-07 3 E. SCREAMIN’ EAGLE PRO EFI RACE FUELER Fits ’96-’04 fuel-injected Dyna, Softail and Touring models. Fits ’05 fuel-injected Dyna, Softail, and Touring models, and ’02-’07 VRSC models. Fits ’06-’07 fuel-injected Dyna, Softail and Touring models. Fits ’07 fuel-injected XL models. $224.95 $224.95 $224.95 $224.95 3 E. SCREAMIN’ EAGLE PRO EFI RACE FUELER EFI RACE USE PERFORMANCE 31 RACE TUNERS