Download Elegant Home Fashions HDTCHR1001 Instructions / Assembly
Transcript
Assembly Steps Care & Maintenance Step 1: Locating the legs (S) Unzip bottom cover under the CHAIR FRAME (A) to locate legs and spacers. (S) --------- (S) sss o- 8 0 (S) Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish. Do not place furniture in direct sunlight. Do not place furniture near heating or cooling vents. Unscrew LEGS (C) and SPACERS (D) from CHAIR FRAME (A). Close zipper. (S) L Do not write on furniture without a padded barrier to protect the surface. (S) ~ ••• * Do not place furniture outside. For indoor use only. Step 2: Attaching the legs Turn the CHAIR FRAME (A) on its side as shown on a non marring padded surface. Attach LEG (C) with SPACER (D) to each of the four corners of the CHAIR FRAME(A) by hand turning clockwise. Make sure legs are tightly turned against the chair bottom. The sides of the two front legs should be aligned with the front side of the chair. •** (S) _.--® llliffil ~ ~Q After all 4 legs have been installed, turn the Chair frame upright on its feet.Assembly process is complete. ~ Page4 ~ Not for commercial use. For residental use only. Dust and pick-up spills using a clean, non-colored, lint-free cloth. Stains may be removed with mild soap solution and damp cloth. Page 5 Assembly Preparation Parts List Label Picture A ~ B E3 Description Qty Chair Frame 1 Seat Cushion 1 Before Begininng: D c D -GIIID lb Legs 4 ~ Spacers 4 -~ -4BID- ..... -EIIID dJdJCDJ\]} - '( ~ ~ ~ ; Page2 • Ensure you have all parts. • Read Instructions, cover to cover. • Save all packaging until finished. • In case of missing parts contact your nearest Cost Plus World Market Store. Page3