Download KOHLER K-3842-4-NA Installation Guide
Transcript
OCTAVETM Features • • • • • • • • TOP-MOUNT KITCHEN SINK K-3842 18-gauge stainless steel Top-mount Double (equal) bowl 4-hole (-4), 3-hole (-3), or single-hole (-1) Includes installation hardware Includes SilentShield® sound-absorption technology Includes left bottom bowl rack, sponge caddy, and a bottle of stainless steel cleaner 33″ (838 mm) x 22″ (559 mm) Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.19.3/CSA B45.4 Colors/Finishes • NA: None applicable Accessories • CP: Polished Chrome • ST: Stainless Steel • NA: None applicable • Other: Refer to Price Book for additional colors/finishes Specified Model Model K-3842-1 K-3842-3 K-3842-4 Description Top-mount kitchen sink – 1-hole Top-mount kitchen sink – 3-hole Top-mount kitchen sink – 4-hole (shown) Included Accessories K-6139 Sponge caddy K-6483 Bottom bowl rack, left (flippable) 1056368 Stainless steel cleaner Colors/Finishes ❑ NA ❑ NA ❑ NA ❑ ST ❑ ST ❑ NA Product Specification The top-mount kitchen sink shall be made of 18-gauge stainless steel. Sink shall be 33″ (838 mm) in length and 22″ (559 mm) in width. Sink shall feature double equal compartment. Sink shall be available with 1-hole [-1], 3-hole [-3], or 4-hole [-4]. Sink shall include SilentShield sound-absorption technology. Sink shall also include left bottom bowl rack, sponge caddy, a bottle of stainless steel cleaner and installation hardware. Sink shall be Kohler Model K-3842-____-NA. Page 1 of 2 1191090-4-A USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com OCTAVETM Optional Accessories K-6453 Bottom bowl rack, right K-8801 Duostrainer® sink strainer 1177161 Hardware kit for countertops up to 2-1/2″ (64 mm) thickness ❑ ST ❑ CP ❑ Other_____ ❑ NA Technical Information Included components: Hardware kit – top-mount Fixture*: Bowl area 14-3/8″ (365 mm) x 18-5/16″ (465 mm) Water depth 9″ (229 mm) Drain hole Ø 3-5/8″ (92 mm) Faucet holes Ø 1-7/16″ (37 mm) * Approximate measurements for comparison only. K-3842-4 4" (102 mm) 16-1/2" (419 mm) 10-1/2" (267 mm) 1177160 Installation Notes Install this product according to the installation guide. Cut-out is 32-1/2″ (826 mm) x 21-1/2″ (546 mm) with 1/2″ (13 mm) radius corners. K-3842-3 6-1/8" (156 mm) 4" (102 mm) 2-3/8" (60 mm) 2-3/8" (60 mm) 7-11/16" (195 mm) 22" (559 mm) K-3842-1 6-1/8" (156 mm) 2-3/8" (60 mm) 6-3/8" 10-1/8" (162 mm) (257 mm) 33" (838 mm) 14-11/16" (373 mm) 1/4" (6 mm) 9-5/16" (237 mm) 1-1/2" OD Product Diagram OCTAVETM TOP-MOUNT KITCHEN SINK Page 2 of 2 1191090-4-A 1-1/2" 1-3/4" (44 mm) (38 2-3/16" (56 mm)