Download SECO-LARM USA CA-1510-3FLQ User's Manual

Transcript
Illuminated Power Connectors
CA-1610-3FLQ – Male Plug
CA-1510-3FLQ – Female Jack
CA-1615-06LQ – Test Light
Features:
CA-1610-3FLQ (3' wire leads)
Simplifies installation of any CCTV, Access
control, or security application.
Eases troubleshooting, check at a glance if there is power.
Check for low voltage AC/DC before connecting your device:
Correct DC Polarity - Blue
Incorrect DC Polarity - Red
AC Voltage - Purple
CA-1510-3FLQ (3' wire leads)
Safety: Illumination glows from all directions to indicate voltage.
Saves Money and Time: Test power before connecting equipment.
5 ~ 30 VAC/VDC range.
LED shines brighter as voltage increases.
Applications:
Portable and versatile test light.
Permanent power indicator.
Check for voltage and polarity of CCTV
and access control installations.
Check power supply voltage.
Check polarity of UTP wires with power.
CA-1615-06LQ
No
Power
U.S.A. and international Patents pending.
Correct
DC Polarity
Incorrect
DC Polarity
AC
Voltage
(LED shines brighter as voltage increases.)
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
®
16842 Millikan Avenue, Irvine, CA 92606
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: [email protected] Website: www.seco-larm.com
IllluminatedPowerConnectors.cdr