Transcript
Specifications DESCRIPTION • Metal construction with chrome plating, chrome with LifeShine® polished brass accents or platinum finish • Includes showerhead, arm and flange OPERATION • Lever style handle • Handle operates counterclockwise through a 270˚ arc with off at 6 o'clock and maximum hot at the 9 o'clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 3˚ FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) Max CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to: CSA B-125, ASME A112.18.1M and ANSI A117.1, ASSE 1016, and all applicable requirements referenced therein WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 2" CC (51mm) 1 7/8" IPS (48mm) MAX WALL ADA Villeta™ Posi-Temp® Single-Handle Shower Only Trim Kit Models: TL2302, TL2302CP, TL2302PM (Packed 1 per carton) Discontinued Models: TL2392, TL2392CP, TL2392P, TL2392PM, TL2392W, TL2302W, TL2302ST, TL2302P FACE OF STUD 1/2" MIN. CC (13mm) 5/8" MIN IPS (16mm) FINISHED WALL LINE 3/16"(typ) (5mm) PLASTER GROUND 7" (178mm) ESC. DIAM. 1-1/2" (38mm) 2-1/2" MAX. (63mm) 4-1/2" (114mm) 6'-6" (1981mm) NOMINAL CL DIRECTION OF HANDLE ROTATION DIAMETER WALL OPENING 1-3/8" (35mm) SHOWER 45" (1143mm)/ 48" (1219mm) 2-13/16" C.C. (72mm) CL 1-3/8" (35mm) 3-1/2" (89mm) MAX. 2-1/4" (57mm) MIN. PLASTIC TUB/SHOWER SURROUND 32" (813mm) TUB/SHOWER AND TUB ONLY FLOOR LINE FLOOR LINE THICK WALL APPLICATION THIN WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 8/06 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com