Download Marathon Excel Phire 255 User's Manual

Transcript
Marathon® Excel
Data Sheet
Single Sliding Horizontal Cleanroom Door
Manual or Power Operated
Model 245- Manual
Model 255 - Power
Shown with Optional Vision Panel
FEATURES
• Unitized high strength 1-3/4" thick 16 gauge stainless
steel panel for easy cleaning. Stainless steel (20
gauge) edge capping for added strength and
protection.
• Corrosion-resistant, heavy-duty door hardware.
Recessed stainless steel pull handles.
• Top/bottom guidance system positively maintains door
seal and position. Ensures fast, controlled operation
with minimal gasket wear.
• Adjustable top/bottom panel hardware for in-field
adjustments. Maintains a positive and tight seal.
• Full perimeter containment seal under
positive/negative pressure.
• U.L. 10B classification 90 minute rating.
• Stainless steel fusible link.
• Spring closure with adjustable closing speed to close
door upon release of fusible link.
Power model also includes:
• Electromechanical operator with NEMA 4X, U.L. 508A
control panel.
• Specially designed heavy-duty gearbox. Manual
operation during unexpected power failures.
• High strength Kevlar drive belt for quiet reliable
operation.
• U.L. 325 classified operator and system.
• Stainless steel shroud conceals rail (and operator on
powered model)
ASI TECHNOLOGIES, INC. • 5848 N. 95th Court • Milwaukee, WI 53225 • (414) 464-6200 • (800) 558-7068 • FAX: (414) 464-9863 • www.asidoors.com
TOTAL LENGTH (2)WIC + 30"
CLEARANCE FOR SLIDING WIC + 10"
6" FACE TRIM TYP.
4" OVERLAP TYP.
WIC + 24"
(MANUAL DOOR WIC + 10-1/2")
WIC + 17-1/2"
(MANUAL DOOR -TOTAL LENGTH (2)WIC + 16-1/2")
RECESSED
PULL
HANDLE
DUAL STD. REVERSING
PHOTO-EYES
FLOOR LINE
(1) Photo-eye located 24" up from
the floor line.
24" (1) Photo-eye located 1-1/2" up from
the floor line.
SWEEP GASKET
9"
(MANUAL DOOR 10-3/8")
ELECTRICAL ACCESS
10-1/4"
CONTROL CABLE
SUPPLIED BY ASI
SPECIFY CABLE
LENGTH
REMOTE
MOUNT
ELECTRICAL
CONTROL
BOX
GASKET SEAL ON DOOR
1-3/4" PANEL
THICKNESS
GUIDE
ROLLER
Model 255 Power
MOUNTING HARDWARE
SUPPLIED BY OTHERS
4-5/16" TYP.
TOTAL HEIGHT HIC + 17"
( MANUAL DOOR -TOTAL HEIGHT HIC + 18-1/2")
REVERSING EDGE
3-1/2" CONTINUOUS
HOLD DOWN
BRACKET PROVIDED
ALONG LEADING EDGE
65"
43"
WIDTH IN CLEAR (WIC)
HEIGHT IN CLEAR (HIC)
C o n s i s t e n t w i t h o u r p o l i c y o f c o n t i n u e d p r o d u c t i m p r o v e m e n t , w e r e s e r v e t h e r i g h t t o ch a n g e p r o d u c t s p e c i f i c a t i o n s w i t h o u t n o t i c e o r o b l i g a t i o n .
5848 N. 95th Court • Milwaukee, WI 53225 • (414) 464-6200 • (800) 558-7068 • FAX: (414) 464-9863 • www.asidoors.com
For complete Architectural Specifications
contact ASI or visit www.asidoors.com
1-1/2"
WARRANTY
DESIGN AND
• One year limited
CONSTRUCTION
warranty on all
DOOR SIZES
components.
Min: 5’ x 7’
Max: 8’ x 9’
OPTIONS
(Other sizes available • Galvanized steel
Consult factory.)
clad panel.
PANEL
• Flat shroud
CONSTRUCTION
(requires 14”
• Unitized design.
headroom).
• 16 gauge stainless • Vision panel - wire
steel continuously
mesh or clear fire
welded panel.
lite (optional sizes).
• 20 gauge stainless • Available in 20 or
steel edge capping.
45 minute fire
• Full perimeter
ratings. (Larger
gaskets: Nonvision panels
marking gray vinyl,
available with these
blade type.
ratings.)
OPERATION
(Powered Models Only)
• Powered model has • Push plates remote
1/4 h.p.
mounted.
electromechanical • Additional reversing
operator with
photoeye mounted
NEMA 4X
in side frame.
fiberglass control
• Touchless wallbox.
mounted activation
Open - 24”/sec.
switch.
Close - 18”/sec.
•
Actuators: Pull
• (2) remote push
cord; photoeye;
plates.
radio control; loop
detector, motion
PERFORMANCE
FEATURES
detector; or O/C/S
• Reversing edge for
push-button.
instant
• Interlock system.
stop/reverse.
•
Battery back-up
• (1) Send & receive
power supply.
reversing photoeye.
INSULATION
• 1-3/4” thick
honeycomb core.
245-255-10/2007R
©2003, ASI TECHNOLOGIES, INC. • PRINTED IN U.S.A.