Transcript
Assembly Instructions Instrucciones De Asamblea Instructions d’Assemblée Lollipop Lamp Part # LS-LOLLIPOP January 2009 E 1. Insert pole A into base. Screw to secure. Plate D C 2. Screw poles A, B, and C together. You may need to gently pull the cord through from the base. Be careful not to damage the cord when pulling through-(pull straight from opening). 3. Screw plate into pole C. You will need to carefully pull the cord through the base in order to complete this step. 4. Insert a light bulb. B To Secure the Shade: 5. Loosen the 3 Caps (D) under the plate. Do not completely remove the caps. 6. Slide the 3 brackets (E) toward the bulb. A Base 7. Carefully set the glass shade inside the plate’s groove. Do not force the glass if your brackets are not in the correct position. 8. Slide the 3 brackets (E) all the way to outside, and secure the 3 caps (D).