Download Lightolier Sidemount Strip SM STRIP User's Manual
Transcript
Sidemount Strip Page 1 of 2 SM STRIP 4-1/8" WIDE, 1-13/16" DEEP, 24", 36", 48" LENGTHS, 1 OR 2 LAMP, T8 OR T12 Features • • • • • • • • • • • Only 1-13/16" deep. Efficiency 95.8%.. Ballast cover secured by quarter-turn latches. Fully enclosed wiring. May be surface mounted or suspended. May be continuous row mounted. Code gauge, heavy duty, die formed steel channel. Multiple knockouts for convenient installation. Lampholders may be individually replaced or rewired. High reflectance baked white enamel finish. UL Listed for damp locations. . Dimensions "A" 2" (51mm) 2-1/2" (66mm) TOP VIEW 1/2" K.O. (2) 7/8" K.O. (3) 1-13/16" (46mm) 1-1/16" (27mm) 1-1/16" (27mm) SIDE VIEW 7/8" K.O. (4) 1-1/4" (32mm) 3-3/4" (95mm) 1-13/16" (46mm) 4-1/8" (105mm) ONE LAMP 1-13/16" (46mm) 5-11/16" (145mm) TWO LAMP Job Information Type: Job Name: Cat. No.: DIMENSIONS Lamp(s): “A” Channel Length Inches (mm) 2' Channel 24" (610 mm) 3' Channel 36" (914 mm) 4' Channel 48" (1219 mm) Volts/Ballast: Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 Section 3A/Folio H120-15 Sidemount Strip 4-1/8" WIDE, 1-13/16" DEEP, 24", 36", 48" LENGTHS, 1 OR 2 LAMP, T8 OR T12 PHOTOMETRY REPORT NO.: CATALOG NO.: LAMP(S): EFFICIENCY; LUMINAIRE: WATTS: MODEL NO. SM234HPF120LE G14162 SM234HPF120LE 2 F40 , EACH RATED 3150 LUMENS 95.8% SIDE MOUNTED STRIP, MAGNETIC 82.0 CANDELA DISTRIBUTION 0.0 45.0 00 819 819 05 815 814 15 787 785 25 731 741 35 650 673 45 545 586 55 422 492 65 286 400 75 150 323 85 41 288 95 42 276 ZONAL LUMEN SUMMARY ZONE LUMENS 00-030 641 00-040 1061 00-060 1954 00-090 2971 90-180 3061 00-180 6033 DATE.: 8/14/91 FLUX 90.0 819 812 791 752 694 628 561 497 462 443 428 1-13/16" (46mm) 77 222 341 420 452 440 392 334 291 284 %LAMP 10.2 16.8 31.0 47.2 48.6 95.8 %FIXT 10.6 17.6 32.4 49.3 50.7 100.0 LUMINANCE DATA IN CANDELA/SQ M ANGLE AVERAGE AVERAGE IN DEG 0-DEG 45-DEG 45 4703 3870 55 4400 3589 65 3916 3373 75 3129 3348 85 1918 4031 AVERAGE 90-DEG 3855 3730 3728 4118 5055 5-11/16" (145mm) TWO LAMP LER = FS - 69.9 Watts - 82 BF - 0.95 Comparative yearly lighting energy cost per 1000 lumens = $3.43 coefficients of utilization — zonal cavity method RF 20 20 RC 80 50 RW 70 50 30 50 30 1 92 87 82 67 64 2 83 75 68 57 53 3 75 65 57 50 45 4 68 57 49 44 39 5 63 51 42 39 34 6 58 45 37 35 30 7 53 41 33 32 26 8 49 37 29 29 23 9 46 34 26 27 21 10 43 31 24 24 19 room cavity ratio Page 2 of 2 SM STRIP 10 61 49 41 34 29 25 22 19 17 16 50 55 47 41 36 32 29 26 24 22 20 20 30 30 53 44 37 32 28 25 22 20 18 16 10 51 41 34 29 25 21 19 17 15 13 THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES • FIELD PERFORMANCE MAY DIFFER FROM LABORATORY PEFORMANCE. ORDERING INFORMATION Explanation of Catalog Number. Example: SM234HPF120LEGLR SM SIDEMOUNT STRIP BALLAST TYPE: LPF=Low Power Factor HPF=High Power Factor LAMP QUANTITY: 1 or 2 Lamp LAMP: (By Others) 17=(T8), 2' Length 20=T12, 2' Length 25=T8, 3' Length 30=T12, 3' Length 32=T8, 4' Length 34=T12, 4' Length VOLTAGE: 120 or 277 OPTIONS: Add appropriate suffix to catalog no., ie: (GLR) BALLAST: 1 or 2 Lamp Mag. (T12) LE Standard Electro Magnetic P (20 or 30 watts only) <20THD <10THD 1 or 2 Lamp Elec. (T8) SO* HI* LOL Dimming (T8) PS – *Instant Start Standard Other dimming options. Consult factory. OPTIONS & ACCESSORIES SPECIFICATIONS: FUSING: Internal fast-blow fusing. SUFFIX: GLR. Internal slow-blow fusing. SUFFIX: GMF. ELECTRICAL/WIRING OPTIONS: Consult factory. RADIO INTERFERENCE FILTER: 120 or 277 volt, 50 or 60 Hz. One per fixture. SUFFIX: RF. STEM AND CANOPY SETS: Suspends fixture 6", 12", 18" or 24" from surface. Catalog Number: ASC6 CSP (6"), ASC12 CSP (12"), ASC18 CSP (18"), ASC24 CSP (24"). MATERIALS: Chassis parts are die-formed code gauge cold rolled steel, 113/16" deep x 2-1/2" channel width. BALLAST: Cover–code gauge cold rolled steel, secured by quarter-turn latches. FINISH: Chassis exterior–baked white polyester enamel, minimum reflectance 86%. ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°. LABELS: I.B.E.W./UL and ULc Listed. Job Information Type: Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 Section 3A/Folio H120-15