Download DoubleSight Displays Flat Panel Television DoubleSight User's Manual

 Prin Quick Installation Guide
DoubleSight"
DISPLAYS
DoubleSi ght" DS-1900WA En Setting up the Flex Stand and Monitors
DUAL LCD MON ITOR 1. Remove all Accessory Components from the carton and
set aside.
2. Remove Monitors from carton and set aside on flat level
surface.
3. Remove the assembled Flex Stand from the carton. Set
the Flex Stand on a flat level surface and spread the
stand arm supports outward as shown in the picture:
Components В (x) (x)
x Check if all the components are included in the package. Contact your sales representative if any components are
missing.
Contact the sales outlet if you wish to purchase optional accessories. 4. Locate the VESA brackets and bolts on the back of each
x Actual components may look different from the pictures below. monitor. Locate the key hole slots at the end of each
arm support (left and right). To install the monitors,
slide the head of each bolt into the key hole slots and
E WA r ES tighten.
©
Quick Guide Install CD 19” Wide Monitor Dual Stand Audio Cable
2Set 1Set 2EA
25 7
Cable Tie Cable Velcro 4MM Wrench Power Cable VGA Cable DVI Cable
6 EA 2 EA 1EA 2EA 2EA 2EA
O D Installation Note: You can adjust your monitors left > right by
selecting different sets of key holes on the arm supports.
For questions about your DoubleSight Monitor or installation assistance, please contact
our Customer Service Team at 888.897.8869 or [email protected]
En (continued)
Tighten both bolts with the wrench
(4MM) after putting the head of the
bolts through the appropriate key
holes as shown(@).
X Safety Note: Please hold or secure the
stand while installing monitors as stand
may be unbalanced and subject to
tipping during the installation.
USE 4MM WRENCH PROVIDED.
5. Set monitor Viewing Angles
You can now adjust the monitors to your preferred viewing
angles. Both monitors are individually adjustable for tilt, pivot
and swivel. The set adjusts together for height.
1 =
When adjusting the height, please
loosen the handle, set the proper
hight and tighten the handle.
x Note — left monitor moves in forward angles only.
* Safety Note — do not force monitors into position as this may
damage panels.
www.doublesight.com
o
Quick Installation Guide
DoubleSight"
DISPLAYS
Ra Component Names & Functions Ea Cable Management & Connection
Front of the DS-1900WA Cable Connection
= o = ED )
DVI
© @ © O © ©
AC/IN Audio VGA
© Menu Enter: Brings up the OSD Menu I
@ Down: Move with in the OSD Menu or adjust values ( Down) =>
© Up : Move with in the OSD Menu or adjust values (Up) ma
O EXIT: Exit from OSD Menu/Automatic adjustment for monitor setting to optimal
© & : Tumsthe power ON/OFF
GQ Power Indicator: Power status LED sound cable connection
Normal{ON) Green
OFF Black to DVI
Energy Saving Green flash EA
Cable not Connected Green flash _
Cable Management
Rear of the DS-1900WA
Use the provided cable ties and velcro strapping to organize video
and power cables.
ACIN AUDIO VGA
CABLE VELCRO
For questions about your DoubleSight Monitor or installation assistance, please contact
our Customer Service Team at 888.897.8869 or [email protected]
Flex Stand Accessories
P/N Product Description/Product Use
Desk Clamp, Base Style
DS-CLMP1
Replaces Stand Base, Use to secure Flex Stand in
place at the edge of a desk or counter top.
Desk Clamp, Vise Style
DS-CLMP2
Installs over Stand Base, Use to secure Flex Stand
in place at the edge of a desk or counter top.
Grommet Base
DS-GRMT
Replaces Stand Base, Use to secure Flex Stand in
place anywhere on a desk or counter top.
3” Height Pole Extension
DS-EXT3
Use to increase the pole height for users who
require more height.
200mm x 100mm VESA Conversion Bracket
DS-VS200
Use when installing monitors which have a 200mm
x 100mm VESA hole pattern so they fit the
standard brackets.
Additional Accessory Product information is available at
www.DoubleSight.com
A Warning Only use the correct power cord for your local voltage.
The power adapter included in the box automatically
supports 100V~240V.
www.doublesight.com