Transcript
COOPER LIGHTING - LUMARK ® DESCRIPTION LumaWatt motion detector works in conjunction with fixture dimmers to provide bi-level control based on an area's occupancy. Motion detector is passive infrared type and reacts to changes in infrared energy (heat) within the coverage area. Catalog # LumaWatt individual fixture controls are the perfect solution for warehouse and storage area retrofit opportunities. Wiring is integrated directly to the housing without the need to run additional control wires throughout the facility. Comments Type Project Date Prepared by SPECIFICATION FEATURES A ... Power Sensor is wired directly to the luminaire and operates on 120V with Magnetic CWA HID ballast systems. The detector is pre-wired and mounted to junction box. Ballast assembly shipped with wiring compartment for connection to ballast. Specify "HSW" options for Magnetic H.I.D. luminaires and "LSW" option for ECON(TM) Electronic H.I.D. open and enclosed Steeler and Benchmark luminaires. B ... Reflector Bracket Unit comes with all necessary hardware to mount to a wide variety of open or enclosed optical assemblies. Consult individual specification sheets for compatibility and ordering logic. C ... Motion Sensor 360° viewing allows coverage between luminaires. Ideal for mounting heights from 15-45 feet. D ... LED Motion Indicator Green LED provides visual indication of when the sensor is detecting motion. E ... Time Delay Setting Luminaire ships with 15 minute start up timer. Sensors can be adjusted from 30 seconds to 20 minutes. F ... Ambient Environments Standard sensor operates from -10°C to 55°C. IRMS INDIVIDUAL FIXTURE CONTROL OPTION Infarered Intergral Motion Sensor MOTION SENSOR 0 5 10 15 20 25 30 35 40 45 | 30 O R D E R I N G I N F O R M AT I O N | 20 | 10 | 0 | 10 | 20 | 30 1 S A M P L E N U M B E R : M H S S - S A 1 8 - M - 4 0 0 - M T- H S W ER C Specifications and Dimensions subject to change without notice. Consult your representative for additional options and finishes. ADH050473 06/25/2007 4:34:57 PM T EM D YS S NOTES: 1 Consult individual luminaire specification sheets for compatibility and ordering information. S OPTIONS (add as suffix) HSW=Integral LumaWatt Sensor and with Wide Distribution Control for CWA Magnetic Ballast LSW=Integral 0-10V Sensor and with Wide Distribution Control for ECONTM Electronic Ballast TIFIE
