Transcript
DM4 Stand-mount/Bookshelf loudspeaker system Product Summary ● The DM4 is a three-unit monitor loudspeaker system that produces high quality results from an incredibly small cabinet, making it perfect for home or small studio where space is at a premium. ● Acoustic loading is by a very dense, critically damped enclosure with a small controlling vent to optimise the response between 60 and 120Hz. This also produces considerably reduction in cone excursion from 30 to 60Hz. Technical highlights ● The bass/midrange units come in a critically contoured Bextrene cone configuration. This is laminated in a highly resistant damping compound that ensures linear frequency response to at least an octave above crossover. ● The upper mid frequency unit offers wide dispersion from a virtual point source and a 19mm low diaphragm mass plastic dome unit extends frequency response to above 25KHz Drive Units 1 x 19mm voice coil Power Handling 10W – 30W 1 x 34mm mid/high frequency unit Dimensions Height: 530mm Width: 255mm 1 x 164mm bass/midrange unit Frequency Response 30Hz – 25kHz. Better than ± 2dB, Sensitivity Depth: 256mm Finish Standard: teak or walnut 4.8 watts into nominal impedance (i.e Special: satin white or selected veneers 6.2 volts) for a sound pressure of 95dB of rosewood or black ash pink noise at 1 metre Nominal Impedance 8 ohms B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged. www.bwspeakers.com