Transcript
1/ TWIN MICROPHONE MOUNT COMMUNICATIONS PRODUCTS INSTALLATION INSTRUCTIONS TM-1 TWIN MICROPHONE MOUNT GENERAL DESCRIPTION Twin Microphone Mount accessory designed for installation of two or three microphones on one Atlas Sound microphone stand or on a podium or lectern top. Model TM-1 Twin Microphone Mount accessory is designed for use with all Atlas Sound microphone Stands equipped with 5⁄8"-27 male thread. For use in conjunction with two microphones when mounted on one microphone stand, a 5⁄8"-27 lock-cap is provided to cover the tube-mount and offer a finished appearance. For use in conjunction with three microphones when mounted on one microphone stand, the tube-mount is utilized to accommodate the center microphone and the lock-cap is not required. For podium or lectern top installation, 1" off center mounting holes are provided. For podium or lectern top installation with three microphones, the addition of an Atlas Sound model AD-12 adapter base is recommended to mount the TM-1 accessory and to accommodate the center microphone. Total of 8" horizontal spacing is provided between the microphone mounts to assure optimum separation for stereo-purposes or dual microphone application. When additional horizontal spacing or height for mounting of the microphones is desired, Atlas Sound GN-Series gooseneck accessories or AD Series tube adapters are recommended. The Atlas Sound model TM-1 is 8–3⁄4" long, satin chrome finished, includes two 5⁄8"-27 captive thumb screws for fastening of the microphones or microphone holders. Specifications are subject to change without notice AtlasSound.com 1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • ©2002 ATLAS SOUND LP Printed in U.S.A. 000202 TELEPHONE: (800) 876-3332 • FAX: (800) 765-3435 ATS001112 RevA 2/02 PN 8286400
