Transcript
SAVONA™ COUNTERTOP SINK VITREOUS CHINA BARRIER FREE SAVONA™ COUNTERTOP SINK • Raised faucet deck with backsplash rim • Made from vitreous china • Self-rimming with cutout template supplied • Soap/accessory ledge • Rear overflow • Design matched to Savona toilets • Shown with 8871.902 Lexington spread faucet ❏ 0186.803 Faucet holes on 8" (203mm) centers (illustrated) ❏ 0186.403 Faucet holes on 4" (102mm) centers ❏ 0186.001 Center hole only Nominal Dimensions: 559 x 432mm (22" x 17") FINISHED WALL OR SPLASHBACK 203mm (8) OPTIONAL 70mm (2-3/4) Bowl sizes: 406mm (16") wide 254mm (10") front to back 152mm (6") deep 216mm (8-1/2) 432mm (17) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixture COUNTERTOP (BY OTHERS) To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: 559mm (22) 25mm (1) SEALING COMPOUND 25mm (1) 178mm (7) 260mm* (10-1/4) 318mm* (12-1/2) 203mm (8) SUPPLIES AS REQ'D 178mm (7) * See faucet section for additional models available 1-1/4 O.D. WASTE 1-1/4 O.D. TAILPIECE 787mm (31) FINISHED FLOOR NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE *SUGGESTED. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. J26 Revised 2/08