Transcript
RAVENNA™ RIGHT HEIGHT™ TOILET VITREOUS CHINA RAVENNA™ RIGHT HEIGHT™ TOILET ❑ 2646.016 • • • • • • • • • • • • • Vitreous china Low-consumption (6.0 Lpf/1.6 gpf) Elongated siphon action jetted bowl 16-1/2" Rim height for accessible applications Fully glazed 2" trapway AquaForce flushing technology Styled tank w/fitted tank cover Chrome trip lever Speed Connect™ tank/bowl coupling system Sanitary bar on bowl 2 color matched bolt caps 100% factory flush tested Design coordinated to Ravenna pedestal lavatory ❑ 3417.016 Bowl ❑ 4096.016 Tank FINISHED WALL 756mm (29-3/4) Alternate Tank: ❑ 4096.516 with Aquaguard tank liner 19mm ± 6mm (3/4 ± 1/4) 476mm (18-3/4) 222mm (8-3/4) Nominal Dimensions: 756 x 476 x 787mm (29-3/4" x 18-3/4" x 31") 470mm (18-1/2) C/L C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS) Fixture only, seat and supply by others 83mm (3-1/4) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions 419mm (16-1/2) *222mm (8-3/4) 16mm (5/8) 178mm (7) 305mm (12) To Be Specified: ❏ Color: ❏ Seat: American Standard #5324.019 “Rise and Shine" solid plastic, closed front, elongated seat with cover. ❏ Seat: American Standard #5311.012 “Laurel" molded closed front seat with cover. ❏ Alternate Seat: ❏ Supply with stop: 787mm (31) SUPPLY AS REQ'D 305mm (12) 381mm (15) 152mm (6) FINISHED FLOOR 241mm (9-1/2) C/L OF OUTLET NOTES: THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. *SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES. K62 © 2006 American Standard Inc. Revised 5/05