Download American Dryer Corp. EURO-35 User's Manual

Euro-35 Phase 6 OPL
24 VAC Phase 5 Coin
Parts Manual
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
012902JCARRITA/mcronan
ADC Part No. 450580
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO.
Euro-35
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Control Door Assembly .......................................................................................................................... 2
Phase 6 OPL Microprocessor Control Panel Assembly ........................................................................... 3
Phase 6 OPL Microprocessor Control Box Assembly ............................................................................. 4
Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5
Coin Vault Assembly ............................................................................................................................... 6
Dual Timer Control Panel Assembly ........................................................................................................ 7
Coin and Dual Timer Control Box Assembly ............................................................................................ 8
Front Panel Assembly ............................................................................................................................. 9
Main Door “Steel” Assembly ................................................................................................................ 10
Main Door Switch Assembly ................................................................................................................. 11
Basket (Tumbler)/Support Assemblies ................................................................................................... 12
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. as of August 10, 2000 ......................................................................................... 13
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to August 10, 2000 ..................................................................................... 14
Idler Bearing Assembly ......................................................................................................................... 15
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of January 7, 2000 .................................................................................... 16, 17
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to January 7, 2000 ................................................................................ 18, 19
Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................................ 20, 21
Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 22, 23
Sensor Bracket Assemblies ............................................................................................................. 24, 25
Hot Surface Ignition (HSI) Burner Assembly ................................................................................... 26, 27
Electric Oven Assembly .................................................................................................................. 28, 29
Electric Oven Component Application Chart ......................................................................................... 30
Sail Switch Assembly ............................................................................................................................ 31
Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 32
3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 33
Reversing Electric Relay Panel Assembly ......................................................................................... 34, 35
Air Operated Steam Damper Assembly ........................................................................................... 36, 37
Outer Top/Back Guard Assemblies ....................................................................................................... 38
Microprocessor Coin Acceptors Listing ................................................................................................ 39
Additional Parts Available ..................................................................................................................... 40
2
Control Door Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
Part No.
Qty.
160015
1
160017
1
160104
160052
112367
882751
1
1
1
1
882749
1
882761
1
117603
150309
102603
150309
102502
102601
4
2
1
2
1
1
American Dryer Corporation
Description
High Security MK-100 Lock Assembly with Key
(for coin models Only)
Special Dummy Lock ONLY
(for non-coin models Only)
MK-100 Key ONLY
Lock Cam ONLY
Euro Logo with Tape
White High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Coral Blue High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Ivory High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Noise Suppressor Tape (sold by the foot)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Rod Support Catch
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Support Rod
Control Door Rod Retainer Clip
88 Currant Road / Fall River, MA 02720-4781
Phase 6 OPL Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
Part No.
Qty.
112537
112276
1
1
112275
1
112277
1
112278
1
881745
881747
1
1
881746
1
137123
137122
150005
153010
150309
136048
136017
136019
1
1
3
3
1
1
1
1
Telephone: (508) 678-9000
3
Description
Phase 6 OPL Keyboard
OPL Stick-On Labels
(English Only)...Not Illustrated
3-Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew)...Not Illustrated
3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew)...Not Illustrated
5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
Phase 6 Microprocessor Controller (computer) Panel ONLY
Phase 6 OPL Non-Reversing Computer Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7 through 9)
Phase 6 OPL Reversing Computer Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7 through 9)
Phase 6 OPL Non-Reversing Microprocessor Controller (computer) ONLY
Phase 6 OPL Reversing Microprocessor Controller (computer) ONLY
#6-32 x 3/4” Phillips Round Head Machine Screw
#6 Star Washer
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/8-Amp (slo blo) Fuse
3.15-Amp (fast acting) Fuse
1-Amp (fast acting) Fuse
Fax: (508) 678-9447
4
Phase 6 OPL Microprocessor Control Box Assembly
Illus. No.
1
2
3
4
5
-*
Part No.
122648
122646
122640
122644
122706
122801
Qty.
1
1
1
1
*
1
Description
4-Pin Connector
2-Pin Connector
9-Pin Connector
6-Pin Terminal
Socket Terminal ONLY
Pin/Socket Extraction Tool
As needed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
Part No.
Qty.
112526
801213
1
1
801229
1
5
6
7
801259
801258
150309
137213
824998
153010
150005
--------
1
1
1
1
1
2
2
1
8
--------
1
9
10
137023
137021
880772
122800
136048
1
3
1
1
1
3
4
11
Description
Coin Keyboard Label Assembly
Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
Coin Control Panel ONLY
Coin Control Panel ONLY with Battery Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 39)
Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 39)
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (slo blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
Coin Vault Assembly
Illus. No.
1
Qty.
802112
1
4
802117
160028
875061
160105*
802020
1
1
1
1
1
5
6
7
8
9
802019
125915
802018
152014
102502
102601
102603
1
1
1
4
1
1
1
2
3
*
Part No.
Description
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Microprocessor Coin Vault ONLY
Cam for 1/4 Turn Lock ONLY
1/4 Turn Lock with Key and Cam
1/4 Turn Mer-Pel Key ONLY
1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
1/4 Turn Coin Box ONLY without Faceplate
High Security (Greenwald) Coin Box ONLY with Key
1/4 Turn Coin Box Faceplate ONLY
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Support Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Dual Timer Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
*
Part No.
Qty.
123005
122400
818051
1
1
1
--------*
1
850456
131917
150207
154001
152000
153010
120730
150110
131932
151000
112050
124103
124025
124030
132198
1
1
2
2
2
2
1
4
1
2
1
2
1
1
1
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Non-Reversing Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 16)
Reversing Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 17)
Dual Timer Control Panel ONLY
Push-to-Start Relay - 24 VAC
#10-24 x 1/2” Round Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
30-Position Terminal Block
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Relay - 24 VAC
#6-32 Pal Nut
Dual Timer Label ONLY
Arrow Timer Knob
60-Minute Timer - 24 VAC
15-Minute Timer - 24 VAC
Reversing Timer - 24 VAC (reversing models Only)
Not available at time of printing. Contact factory for information.
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Coin and Dual Timer Control Box Assembly
Illus. No.
*
Part No.
Qty.
1
2
150301
131931
2
1
3
4
-5
6
122641
122706
122801
150301
132198
1
*
1
2
1
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Heat Relay - 24 VAC
(for dual timer models Only)
15-Pin Microprocessor Controller (computer) Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
Reversing Timer 24v
(for reversing dual timer models Only)
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
9
Front Panel Assembly
Illus. No.
1
Part No.
Qty.
882905
1
882901
1
882902
1
3
150313
150318
--------
11
1
1
4
--------
1
5
881987
1
6
154215
2
2
Telephone: (508) 678-9000
Description
White Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Coral Blue Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Ivory Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
#10-16 x 1/2” TORX Plus BTN Type 1
25 IP TORX Plus Bit 1/4 Hex (for removal of TORX head screw)
Main Door Hinge
(refer to Main Door “Steel” Assembly on page 10)
Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assemblies on page 13)
Friction Door Latch
(includes illus. nos. 5 and 6)
5/32” Pop Rivet
Fax: (508) 678-9447
10
Illus. No.
Main Door “Steel” Assembly
Part No.
Qty.
1
881150
1
2
3
102354
170730
170731
881152
1
1
1
1
4
5
6
150445
153031
881151
2
1
1
7
8
9
10
11
12
13
14
15
150445
150683
152014
151010
150120
150683
152014
881210
102211
102218
2
3
3
1
1
3
3
1
1
1
170730
170731
1
1
American Dryer Corporation
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Clear Glass Adhesive (10.3 oz. cartridge)
Black Glass Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/2-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/2-20 Free Spin Wash Nut
Black Main Door Handle ONLY
20-7/16” Door Glass
20-7/16” Door Glass with 4 Holes
(for models mfd. between February 2, 2001 and September 6, 2001)
Clear Glass Adhesive (10.3 oz. cartridge)
Black Glass Adhesive (10.3 oz. cartridge)
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
150006
152013
153010
137005
122636
881211
881153
2
2
2
1
2
1
1
7
150301
2
Telephone: (508) 678-9000
11
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Door Switch
Flag Terminal
Black Main Door Switch Housing ONLY
Black Main Door Switch Housing Complete
(includes illus. nos. 1, 2, 3, 4, and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
12
Illus. No.
1*
Part No.
Qty.
800708
800734
800816
1
1
1
800873
1
2
150413
150429
40
1
3
301308
301423
150500
100905
153004
800613
152005
153005
153004
116000
401010
4
4
1
4
4
1
4
4
4
1
1
4
5
6
7
8
9
10
11
--*
Basket (Tumbler)/Support Assemblies
Description
Basket (tumbler) ONLY without Felt Collar
Stainless Steel Basket (tumbler) ONLY without Felt Collar
Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
Stainless Steel Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
#10-16 x 1/2” TORX Head Crimptite Screw
TORX Hand Driver
(for removal of TORX head screw)
Basket (tumbler) Rib ONLY
Stainless Steel Basket (tumbler) Rib ONLY
5/16-18 x 3/4” Socket Button Head Screw
3/8-16 x 37” Tie Rod
3/8” Flat Washer
Basket (tumbler) Support ONLY
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Adhesive For Felt Collar
Felt collar is not included and must be ordered separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
13
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. as of August 10, 2000
Illus. No.
1
2
3
4
5
6
7
8
9
*
Part No.
Qty.
883155
1
883156
1
883157
1
117605
122116
122605
122701
122801
883229
5
1
1 or 2
*
1
1
818087
1
304136
150301
122700
122604
1
2
*
1 or 2
Description
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Ivory Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Gasket (sold by the foot)
Lint Drawer Switch
4-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
Lint Drawer Switch Box Assembly (for coin models Only)
(includes illus. nos. 4 through 7)
Lint Drawer Switch Box Assembly (for OPL models Only)
(includes illus. nos. 4 through 7)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to August 10, 2000
Illus. No.
1
2
3
4
5
6
7
8
9
10
*
Part No.
Qty.
882514
1
882515
1
882516
1
117605
108224
122116
122605
122701
122801
883229
5
1
1
1 or 2
*
1
1
818087
1
304136
150301
122700
122604
1
2
*
1 or 2
Description
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Almond B Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Neoprene Sponge tape (sold by the foot)
Lint Screen Assembly
Lint Drawer Switch
4-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
(for coins models Only)
Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
(for OPL models Only)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Idler Bearing Assembly
Illus. No.
1
2
3
Part No.
Qty.
100106
101140
100194
1
1
1
100109
1
4
5
6
154301
100705
882576
2
1
1
7
8
9
10
11
12
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
Telephone: (508) 678-9000
15
Description
5L-690 V-Belt (basket [tumbler] to idler)
14” x 3” Compound Pulley
4L-720 V-Belt (idler to motor)
For Non-Reversing Models ONLY
4L-650 V-Belt (idler to motor)
For Reversing Models ONLY
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
16
American Dryer Corporation
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of January 7, 2000
88 Currant Road / Fall River, MA 02720-4781
17
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of January 7, 2000
Illus. No.
1
2
3
4
Part No.
Qty.
880220
153025
152050
882544
1
4
4
1
882545
1
882542
882543
1
1
5
880202
880779
1
1
6
7
8
9
10
11
12
13
14
15
16
17
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
102120
2
2
2
2
2
2
2
2
4
6
4
1
18
19
824807
100724
1
1
100713
1
100735
1
101100
1
101118
1
21
101110
1
22
23
24
100106
150610
152004
1
2
2
20
Telephone: (508) 678-9000
Description
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 17, 23, and 24)
Pillow Block Bearing Assembly Complete with Rotational Sensor
(includes illus. nos. 4 through 18, 23, and 24)
Pillow Block Bearing Platform ONLY
Pillow Block Bearing Platform ONLY
(for models with rotational sensor)
1-3/8” Pillow Block Bearing
1-3/8” Pillow Block Bearing
(for reversing models Only)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet
(for reversing models Only)
Rotational Sensor Assembly
Shaft Key
(for non-reversing models mfd. as of July 9, 2001)
Shaft Key
(for non-reversing models mfd. prior to July 9, 2001)
Shaft Key
(for reversing models Only)
18” Pulley
(for non-reversing models Only)
18-3/4” Pulley
(for reversing models Only)
1” Taper Lock Bushing
(for reversing models Only)
5L-660 V-Belt (basket [tumbler] to idler)
5/16-18 x 1-1/2 Allen Setscrew
5/16-18 Hex Nut
Fax: (508) 678-9447
18
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to January 7, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
19
For Models Mfd. prior to January 7, 2000
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
*
Part No.
Qty.
880220
153025
152050
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
1
4
4
2
2
2
2
*
2
2
4
4
4
2
2
1
801103
1
17
18
801105
801104
880779
1
1
1
19
20
21
880202
152004
150610
101100
1
2
2
1
101118
1
101110
1
22
23
100735
154301
100713
1
2
1
24
25
100106
824807
1
1
Description
1-3/4” Flange Bearing with Nylock Setscrew
9/16” Lock Washer
9/16-12 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
(for models mfd. without rotational sensor)
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support ONLY
1-3/8” Pillow Block Bearing Assembly with Magnet
(for models mfd. with rotational sensor)
1-3/8” Pillow Block Bearing with Nylock Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
18” Pulley
(for non-reversing models Only)
18-3/4” Pulley
(for reversing models Only)
1” Taper Lock Hub (key not included)
(for reversing models Only)
Shaft Key (for taper lock hub)
5/16-18 x 1” Allen Setscrew
1/4” x 1/4” x 7/8” Key
(for non-reversing models Only)
5L-660 V-Belt (basket [tumbler] to idler)
Rotational Sensor Assembly
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
American Dryer Corporation
Non-Reversing T.E.F.C. Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
21
Non-Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
*
Part No.
Qty.
100194
100701
101133
101130
150501
153002
153001
100073
1
1
1
1
4
4
4
1
122701
122801
137030
152004
153002
153001
117604
154000
800919
803992*
8
1
1
4
4
4
4
4
1
1
803953
1
803955*
1
803958*
1
153051
882670
100714
153050
152006
120200
100075*
1
1
1
2
2
1
1
100076
1
Description
4L-720 V-Belt (idler to motor)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (50 Hz Only)
5/16-18 x 3/4” Tap Bolt Zinc
5/16” Lock Washer
5/16” Flat Washer
1 HP 120/208/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug (56Z frame)
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Neoprene Sponge Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY (56Z frame)
1 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly with Plug Complete
(includes illus. nos. 2 through 7 and 13 through 20)
3/4 HP 230v 1ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1 HP 230/380/460v 3ø 60 Hz Non-Reversing Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1 HP 230/380/460v 3ø 50 Hz Non-Reversing Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
3/4” S.A.E. Flat Washer
16” Fab Fan Assembly (rivets)
3/16” x 3/16” x 1-7/8” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
3/8” x 90° Connector
1 HP 208/230/240/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor
3/4 HP 230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
(50 Hz Only)
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
22
American Dryer Corporation
Reversing T.E.F.C. Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
23
Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
1
2
3
Part No.
Qty.
4
5
100109
100701
101130
101139
120200
181003
1
1
1
1
1
1
6
7
8
9*
150501
153002
153001
100075
4
4
4
1
10
11
12
13
14
15
16
17
18
120200
150501
153002
153001
154000
152004
153002
153001
800920
803952**
1
4
4
4
8
7
7
7
1
1
803987**
1
19
20
21
22
23
24
117604
153051
100714
882670
153050
152006
4
1
1
1
***
2
Description
4L-630 V-Belt (to idler assembly)
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley (60 Hz Only)
5/8” x 2-3/4” Motor Pulley (50 Hz Only)
3/8” x 90° Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
5/16-18 x 3/4” Tap Bolt Zinc
5/16” Lock Washer
5/16” Flat Washer
1 HP 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor with 3/4” Shaft (56Z frame)
3/8” x 90° Connector
5/16-18 x 3/4” Tap Bolt Zinc
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
Neoprene Sponge Tape (sold by the foot)
3/4” S.A.E. Flat Washer
3/16” x 3/16” x 1-7/8” Key
16” Fab Fan Assembly (rivets)
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
** Specify voltage when ordering.
*** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
24
American Dryer Corporation
Sensor Bracket Assemblies
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
130301
153010
152000
121028
122701
112801
122605
154007
150005
824051
1
2
2
2
4
1
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
322062
122604
122700
150301
150005
130111
130100
130301
130101
153010
152000
882535
121028
122701
122605
882534
1
1
4
2
5
1
1
1
1
5
5
1
4
4
1
1
25
882536
1
322062
122604
122700
122801
150301
1
7
8
9
10
26
27
28
4
1
2
Telephone: (508) 678-9000
25
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Manual Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Female Terminal
Socket Terminal ONLY
Pin/Socket Extraction Tool
4-Pin Socket Connector ONLY
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
130° Large Thermostat
150° Large Thermostat
225° Manual Reset Thermostat
180° Large Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper ONLY
Insulated Female Terminal
Socket Terminal ONLY
4-Pin Socket Connector ONLY
Sensor Bracket Harness Assembly
(includes illus. nos. 22, 23, and 24)
Noncomputer Sensor Bracket Assembly Complete
(includes thermostats)
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
26
American Dryer Corporation
Hot Surface Ignition (HSI) Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
27
Hot Surface Ignition (HSI) Burner Assembly
Illus. No.
Part No.
Qty.
1
817110*
1
817111*
1
810046
882459**
150309
150309
810029
128975
141105
150103
153000
151001
140820
140804
141210
318700
150300
128933
883255
141314
142809
323737
319704
151000
150001
130201
---------
1
1
2
3
1
1
4
4
4
4
4
4
1
2
2
1
1
1
1
1
1
2
2
1
1
142936
142936
150309
150309
151001
150309
128912
150301
881597
150309
1
1
2
2
2
3
1
1
1
1
2
3
4
5
6
7
8
9
10**
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Description
Natural Gas Burner Assembly Complete Less Orifices
(includes illus. nos 1 through 9 and 11 through 31)
For Models Manufactured with Natural Gas ONLY
Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices
(includes illus. nos 1 through 9 and 11 through 31)
For Models Manufactured with Liquid Propane (L.P.) Gas ONLY
Burner Box ONLY
Liquid Propane (L.P.) Conversion Kit
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hot Surface Ignition (HSI) Module Mounting Bracket
Hot Surface Ignition (HSI) Module II
Large Burner Tube
#8-32 x 3/4” Phillips Round Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
#29 Burner Orifice (natural gas) ONLY
#48 Burner Orifice (liquid propane [L.P.] gas) ONLY
4-Port Manifold
Pipe Bracket (bent)
#10-16 x 1/2” Hex Washer TEK Screw
CE 1/2” 24 VAC Redundant (natural gas) Gas Valve
CE 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Assembly
1/2’ Union Shutoff with Tail Piece
1/2” x 29-1/8” Nipple
Pipe Bracket
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330º Hi-Limit ONLY
Sail Switch
(refer to Sail Switch Assembly on page 31)
3/4” to 1/2” Reducing Coupling
3/4” BSPT x 1/2” N.P.T. Coupling (CE Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#8-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hot Surface Ignition (HSI) Flame Sensor
#8-18 x 7/16” Phillips Pan Head TEK Screw
Hot Surface Ignitor (2-1/2” length) - 24 VAC
#10-16 x 1/2” Hex Head TEK Crimptite Screw
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
Electric Oven Assembly
ELECTRIC OVEN (FRONT VIEW)
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803005
--------*
--------*
150300
802800
802801
1
1
2
1
1
154004
150309
802799
122200
150303
105500
319202
154002
150300
803100
320611
150301
130400
150300
154001
121012
152014
--------*
--------*
120081
120080
152008
121011*
--------**
153009
320607
150402
882772***
1
2
1
1
2
1
1
1
2
1
1
2
1
2
1
1
3
1
1
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
--
29
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
290° Hi-Limit
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
Terminal Lug for 110-8 Wire
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 5/8” Truss Head Machine Screw
Steam to Electric Interface Plate...Not Illustrated
* Refer to Electric Oven Component Application Chart on page 30.
** Consult factory for wiring harness required.
*** Needed when converting from steam heat to electric heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
American Dryer Corporation
Kw
Phase Wire
Elements
Oven Wire
Terminal Lug
Oven Assembly*
B u s B ar
Part No.
P
/
N 121011
Qty. Size Part No. Qty. Size Part No. Qty. Part No.
Oven Relay
Cat. No. Part No.
40
41 6
3ø
3 or 4
824922
6
6.6
120027
1
#6
830404
1
121010
1
DFAG
131361
36
208
3ø
3 or 4
824921
6
6
120015
1
#2
830408
1
121012
1
G EA J
131385
36
230
3ø
3
8 2 40 2 6
6
6
120014
1
#2
830405
1
121012
1
FE A J
131375
36
460/480
3ø
3 or 4
824920
6
6
120014
1
#8
8 3 0 40 2
1
121010
1
DPA43
131357
33
380
3ø
3 or 4
825078
6
6
120027
1
#2
8 3 0 40 4
1
121012
1
DFAJ
131361
30
208
3ø
3 or 4
824918
6
5
120012
1
#2
830407
1
121012
1
FE A J
131375
30
230
3ø
3
824935
6
5
120013
1
#2
830407
1
121012
1
FE A J
131375
30
416
3ø
3 or 4
824947
6
5
120012
1
#8
830401
1
121010
2
DPA43
131357
30
460/480
3ø
3 or 4
824953
6
5
120013
1
#8
830402
1
121010
2
BFAJ
131351
25
380
3ø
3 or 4
824940
6
5
120012
1
#8
8 3 0 40 2
1
121010
2
BFAJ
131351
24
208
3ø
3 or 4
8 2 49 1 6
6
4
120010
1
#4
830405
1
121012
1
DPA63
131369
24
230
3ø
3
824933
6
4
120011
1
#6
830404
1
121010
1
DFAG
131361
24
416
3ø
3 or 4
824946
6
4
120010
1
#8
8 3 0 40 1
1
121010
2
BFAJ
131351
24
460/480
3ø
3 or 4
824952
6
4
120011
1
#8
8 3 0 40 2
1
121010
2
BFAJ
131351
20
208
1ø
2
824904
5
4
120010
1
#4
830405
1
121012
2
G EA J
131385
20
230
1ø
2
8 2 49 2 6
5
4
120011
1
#4
830414
1
121012
2
FE A J
131375
20
380
3ø
3 or 4
824939
6
4
120010
1
#8
830402
1
121010
2
BFAJ
131351
Oven assembly complete does not include oven relay. This item must be ordered separately. When ordering Oven Assembly Complete, specify 3
wire or 4 wire when applicable, as well as if dryer has microprocessor controller (computer) or non-microprocessor controls.
Electric Oven Component Application Chart
88 Currant Road / Fall River, MA 02720-4781
*
Volt
31
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
319203
319202
319201
319200
154004
154002
150309
150303
122200
881706
1
1
1
1
1
1
4
2
1
1
10
105500
1
Telephone: (508) 678-9000
Description
Sail Switch Mounting Bracket
Sail Switch Damper (flat)
Sail Switch Box Cover
Sail Switch Box
Twin Speed Nut
1/8” Push On Fastener
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 10)
Sail Switch Actuator Rod
Fax: (508) 678-9447
32
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Part No.
Qty.
151000
150300
150008
120716
322817
818073
2
2
2
1
1
1
818044
--------*
1
1
--------*
818075
--------*
136008
136049
136057
150301
150297
152004
121010
153002
132459
121300
1
1
1
1 or 2
1
2
1
1
1
1
1
1
3
Description
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
2-Position Terminal Block
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 120 Volt
(includes illus. nos. 1 through 14)
Rear Electric Panel Wiring (120 Volt Only)...Not Illustrated
Rear Electric Panel Assembly Complete - 208-240 Volt
(includes illus. nos. 1 through 14)
Rear Electric Panel Wiring (208-240 Volt Only)...Not Illustrated
Transformer Assembly - 120 Volt
Transformer Assembly - 208-240 Volt
Fuse Holder ONLY
3/4-Amp (slo blo) Fuse ONLY - 120 Volt
1/2-Amp (slo blo) Fuse ONLY - 208-240 Volt
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open/Closed Bushing
Not available at time of printing. Contact factory for information.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
33
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*
Part No.
Qty.
151000
150300
150008
120716
322817
818074
2
2
2
1
1
1
818072
1
818069
1
818070
1
--------*
1
--------*
1
818036
818037
132070
136008
136057
150301
150297
152004
121010
153002
132459
121300
1
1
1
2
2
2
1
1
1
1
1
3
Description
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
2-Position Terminal Block
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 208-240 Volt
(for gas and steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Wiring 208-240 Volt...Not Illustrated
(for gas and steam models Only)
Rear Electric Panel Assembly 380-416 Volt 3ø
(for gas and steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Wiring 380-416 Volt 3ø...Not Illustrated
(for gas and steam models Only)
Rear Electric Panel Assembly 380-416 Volt 3ø w 1ø Motor
(for gas and steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel 380-416 Volt 3ø w 1ø Motor...Not Illustrated
(for gas and steam models Only)
Transformer Assembly - 208-240 Volt (for gas and steam models Only)
Transformer Assembly - 380-416 Volt (for gas and steam models Only)
Transformer Assembly - 380-416 Volt (for electric models Only)
Fuse Holder ONLY
1/2-Amp (slo blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open/Closed Bushing
Not available at time of printing. Contact factory for information.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
American Dryer Corporation
Reversing Electric Relay Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
35
Reversing Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
150300
150008
120701
132458
818036
818037
132070
136008
136057
150301
150297
152004
121010
153002
132459
322812
--------*
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
--------*
1
819068
1
819044
1
151000
120765
2
1
6
7
8
9
10
11
12
13
14
15
16
*
Description
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block
3-Pole Reversing Contactor
Transformer Assembly - 208-240 Volt (for gas and steam models Only)
Transformer Assembly - 380-416 Volt (for gas and steam models Only)
Transformer Assembly - 380-416 Volt (for electric models Only)
Fuse Holder ONLY
1/2-Amp (slo blo) Fuse ONLY - 208-240 Volt
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 208-240 Volt
(for gas and steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Wiring 208-240 Volt...Not Illustrated
(for gas and steam models Only)
Rear Electric Panel Assembly Complete 380-416 Volt
(for gas and steam models Only)
Rear Electric Panel Wiring (380-416 Volt Only)...Not Illustrated
(for gas and steam models Only)
#6-32 Pal Nut
Standard End Bracket
Not available at time of printing. Contact factory for information.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
American Dryer Corporation
Air Operated Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165009
153002
152004
152002
153007
820321
803415
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151007
152007
100497
100492
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
108
1
1
1
1
1
4
4
1
1
1
1
1
1
2
2
2
1
2
2
1
Telephone: (508) 678-9000
37
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/4” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
38
Illus. No.
1
2
3*
4
5
6*
7
8
9
*
Outer Top/Back Guard Assemblies
Part No.
322809
150301
323738
314510
150301
150300
312527
314511
150301
103500
Qty.
1
4
1
1
7
10
1
1
13
4
Description
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard (for gas models Only)
Top Back Guard (for electric models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Outer Top
Bottom Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
There is no outer top or top back guard on steam models.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
Microprocessor Coin Acceptors Listing
NOTE: Coin acceptors listed include optical switch.
Replacement optic switch for Hanke acceptors is Part No. 881143.
Replacement optic switch for Greenwald acceptors is Part No. 137056.
Single Coin*
ADC Part No.
Nation
882689
United States
125100
U.S. and Canada
125107
881768
881604
125103
125121
125133
Australia
Australia
Japan
----Hong Kong
Description
25¢ Hanke Optic Coin Acceptor
(for models mfd. as of June 15, 2000)
25¢ Greenwald Optic Coin Acceptor
(for models mfd. prior to June 15, 2000)
20¢ Greenwald Australian Optic Coin Acceptor
$1 Hanke Australian Optic Coin Acceptor
100 Yen Hanke Optic Coin Acceptor
0.882 Token Greenwald Optic Coin Acceptor
0.800 Token Greenwald Optic Coin Acceptor
$1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin*
881508
881842
881542
881846
881541
*
U.S. and Canada
Canada
United Kingdom
France
Netherlands
10¢/25¢ Hanke Dual Optic Coin Acceptor
25¢/$1 Hanke Dual Optic Coin Acceptor
1£/20 Pence Hanke Dual Optic Coin Acceptor
2/5 Franc Hanke Dual Optic Coin Acceptor
25¢/1 Guilder Hanke Dual Optic Coin Acceptor
Consult factory for coin acceptors not listed.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Part No.
112039
112280
114001
112284
112533
114006
114094
117505
120100
120300
120400
120500
120600
120800
120802
120902
120903
121014
121499
121500
121503
122804
404502
404506
404507
410001
882458
Additional Parts Available
Description
“Black/White/Green Ground” Label
“Clean Lint Screen” Label
“CAUTION - Exhaust/Lint Screen” Label
“Phase 6 OPL Program Location Summary” Label
“Phase 5 Coin Program Location Summary” Label
“WARNING - Fire Hazards” Label
“MOP HEAD WARNING” Label
Aluminum Duct Tape (sold by the foot)
3/8” Straight (BX) Connector
3/8” x 45° (BX) Connector
3/8” Red Jacket (BX) Insulator
3/8” Jiffy Clip (BX retainer clip)
3/8” Greenfield (BX)
Recept, Fast On Splice
Red Butt Connector
#74B Wire Nut
Closed End Connector
1/4” Insulated (female) Terminal
5-1/2” Wire Tie
8” Harness Tie
Harness Tie Mounting Clip
Manometer (hydro gauge) for Measuring Gas Pressure
White Brush-In-Cap Bottle Touch-Up Paint
Almond “B” Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
1/2” Allen Wrench (for removal of shutoff valve tail piece)
Basket (tumbler) Puller Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450580
1 - 02/07/02-25