Transcript
American DJ ® User Instructions Sapphire 4™ HALOGEN LAMP WARNING! This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions. Thank you for purchasing this fine Caution! Always disconnect from main American DJ® product. For your conve- power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. nience this lighting effect has been lamped and tested for quality and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit. Model: Sapphire 4™ SPECIFICATIONS: Lamp: Power: Colors: Optics: 300W 120V 64514 lamp 110V/60Hz Multiple Dichroic High Quality Glass Lens Reflective Surface mirror Ventilation: Fan Cooled Duty Cycle: 10 Minutes On 10 min. Off Weight: 12 lbs. Size: 20.5” x 7.25” x 5.75” Fuse: 7A Working Position: Any Operating Instructions: This unit is ready to be hung or set on the ground. After plugging this fixture in, the units X-axis mirror will move to the beat of the music. The Sapphire 4™ features a multi-color dichoics dish that will also rotate to the beat of the music. This fixture also features a new case design with extruded aluminum, a hanging bracket, and is sound activated by adjust the sensitivity knob located on the bottom of the unit next to the power cord. This fixture is designed for mobile DJ’s, clubs, bands, roller rinks and any arena that requires a bright easy to use fixture. To replace lamp; Remove the thumb screw and lift the lamp cover. Disconnect the lamp from the socket. Remove and replace lamp. Reassemble. For service, contact your American DJ® dealer. American DJ ® LOS ANGELES, CA. 90058